null  null
UMG 604
Harmonics
Modbus master,
Ethernet gateway
Memory 128 MByte
Homepage
Events
Graphic
programming
UMG 604 – Power analyser
Communication
• Profibus (DP/ V0)
• Modbus (RTU, UDP, TCP, Gateway)
• TCP/IP
• BACnet (optional)
• HTTP (configurable homepage)
• FTP (file transfer)
• SNMP
• TFTP
• NTP (time synchronisation)
• SMTP (email function)
• DHCP
Interfaces
• Ethernet
• RS232
• RS485
Power quality
• Harmonics up to 40th harmonic
• Short-term interruptions (> 20 ms)
• Transient recorder (> 50 μs)
• Starting currents (> 20 ms)
• Unbalance
• Full wave effective value recording
(up to 4.5 min.)
Networks
• IT, TN, TT networks
• 3 and 4-phase networks
• Up to 4 single-phase networks
Measured data memory
• 128 MByte Flash
Accuracy of measurement
• Energy: Class 0.5 S (… / 5 A)
• Current: 0.2 %
• Voltage: 0.2 %
Peak demand management (optional)
• Up to 64 switch-off stages
Programming language
• Jasic®
2 digital inputs
• Pulse input
• Logic input
• State monitoring
• HT / LT switching
• Emax resetting
2 digital outputs
• Pulse output kWh / kvarh
• Switch output
• Threshold value output
• Emax output
• Logic output
(expandable via external I/O modules,
see chapter 05, Industrial data communications)
Temperature measurement
• PT100, PT1000, KTY83, KTY84
Network visualisation software
• GridVis®-Basic (in the scope of supply)
UMG 604
Areas of application
• Master device for energy management systems, (e.g. ISO 50001)
• Measurement, monitoring and checking of electrical
characteristics in energy distribution systems
• Consumption data acquisition
• Monitoring of the power quality (harmonics, short-term
interruptions, transients, starting currents, etc.)
• Measured value transducer for building management systems
or PLC
• Control tasks e.g. depending on measured value or limit
values being reached
• Peak demand management
• Ethernet gateway for subordinate measurement points
• Remote monitoring
Main features
Power quality
• Harmonics analysis up to 40th harmonic
• Unbalance
• Distortion factor THD-U / THD-I
• Measurement of positive, negative and zero sequence component
• Short-term interruptions (> 20 ms)
• Logging and storage of transients (> 50 µs)
• Start-up processes
• Fault recorder function
• Rotary field indication
Fig.: DIN rail mounting (6 TE)
DIN mounting rail (6TE):
Simple and cost-optimised installation
• Mounting on a 35 mm DIN rail
• Clear cost advantages in the switch cabinet construction through
lower installation and connection effort
• Simple integration into the LVDB, in machinery construction,
in installation subdistribution panel for building management
systems, in IT and in data centres
Server
Database
Modern communications architecture via Ethernet
• Rapid, cost-optimised and reliable communication through
integration into an existing Ethernet architecture
• Integration in PLC systems and building management systems
• High flexibility due to the use of open standards
• Simultaneous polling of interfaces possible
2
UMG 604
Fieldbus
UMG 96RM
Fig.: Modern communication architecture
UMG 604
Ethernet-Modbus gateway
• Simple integration of Modbus-RTU devices into an Ethernet
architecture through the Modbus gateway function
• Integration of devices with identical file formats and matching
function codes possible via Modbus RTU interface
High-speed Modbus
• Fast and reliable data exchange via
RS485 interface
• Speed up to 921.6 kB/s
Graphical programming
• Comprehensive programming options on the device,
7 programs simultaneously (PLC functionality)
• Jasic® source code programming
• Functional expansions far beyond pure measurement
• Complete APPs from the Janitza library
Fig.: Graphical programming
Convenient home page and email functions
• Information can be received conveniently by email and via the
device homepage
• Access to powerful device homepage via web browser
• Online data, historical data, graphs, events and much more, is
available direct from the homepage
Large measurement data memory
• 128 MByte
• 5,000,000 saved values
• Recording range up to 2 years
• Recording freely configurable
Fig.: Illustration of the online data via the device's
own homepage
UMG 604
Fig.: Large measurement data memory
3
UMG 604
Dimension diagrams
All dimensions in mm
10 mm
44 mm
35 mm
90 mm
90 mm
73 mm
50 mm
107,5 mm
76 mm
82 mm
Front view
Side view
Typical connection
An. In
RS232
Dig. I/O
RS485
Option
Ethernet
Option
Strommessung
Current measurement
I2
I3
I4
I1
1
RS485
2
3
4
5
6
7
Versorgungsspannung
Auxiliary Supply
Spannungsmessung
Voltage measurement
L1 L2 L3 L4 N
8
9
10
11
12
13
10A
(UL listed)
N
L1
L2
L3
4
S1
S1
S2
S1
S2
S1
S2
S2
Verbraucher
Load
PE
UMG 604
Device overview and technical data
UMG 604E
UMG 604EP
Item number
52.16.002
52.16.012
52.16.022
52.16.001
Item number (UL)
52.16.202
-
-
52.16.201
52.16.021
-
Supply voltage AC
95 ... 240 V AC
50 ... 110 V AC
20 ... 55 V AC
95 ... 240 V AC
20 ... 55 V AC
Supply voltage DC
135 … 340 V DC
50 … 155 V DC
20 … 77 V DC
135 … 340 V DC
20 … 77 V DC
RS485: 9.6 – 921.6 kbps
(Screw-type terminal)
•
•
•
•
•
RS232: 9.6 – 115.2 kbps
(Screw-type terminal)
•
•
•
•
•
Profibus DP: Up to 12 Mbps
(DSUB-9 plug)
-
-
-
•
•
Ethernet 10/100 Base-TX
(RJ-45 socket)
•
•
•
•
•
Modbus RTU, Modbus TCP,
Modbus RTU over Ethernet
•
•
•
•
•
Modbus Gateway for
Master-Slave configuration
•
•
•
•
•
Communication
Interfaces
Protocols
Profibus DP V0
-
-
-
•
•
HTTP (homepage configurable)
•
•
•
•
•
SMTP (email)
•
•
•
•
•
NTP (time synchronisation)
•
•
•
•
•
TFTP
•
•
•
•
•
FTP (File-Transfer)
•
•
•
•
•
SNMP
•
•
•
•
•
DHCP
•
•
•
•
•
TCP/IP
•
•
•
•
•
BACnet (optional)
•
•
•
•
•
ICMP (Ping)
•
•
•
•
•
Device options
Emax function
52.16.080
52.16.080
52.16.080
52.16.080
52.16.080
BACnet communication
52.16.081
52.16.081
52.16.081
52.16.081
52.16.081
General
Use in low and medium voltage networks
Accuracy voltage measurement
Accuracy current measurement
Accuracy active energy (kWh, …/5 A)
Number of measurement points per period
S2
S1
S2
N
Loads
S2
L3
S1
0.2 %
Class 0.5 S
400
•
RMS - momentary value
S1
L2
S1
L1
S2
Uninterrupted measurement
•
0.2 %
Fig.: Current measurement via current transformers
Current, voltage, frequency
•
Active, reactive and apparent power / total and per phase
•
Power factor / total and per phase
•
Energy measurement
Active, reactive and apparent energy [L1,L2,L3, L4, ∑ L1–L3, ∑ L1–L4]
•
Number of tariffs
8
Recording of the mean values
Voltage, current / actual and maximum
•
Active, reactive and apparent power / actual and maximum
•
Frequency / actual and maximum
•
Demand calculation mode (bi-metallic function) / thermal
•
Other measurements
Clock
Weekly timer
•
Jasic®
Comment:
For detailed technical information please refer to the operation manual and the Modbus address list.
• = included - = not included
5
UMG 604
Power quality measurements
Harmonics per order / current and voltage
1st – 40th
Harmonics per order / active and reactive power
1st – 40th
Distortion factor THD-U in %
•
Distortion factor THD-I in %
•
Voltage unbalance
•
Current and voltage, positive, zero and negative sequence component
•
Transients
50 µs
Error / event recorder function
•
Short-term interruptions
20 ms
Oscillogram function (waveform U and I)
•
Full wave effective values (U, I, P, Q)
•
Under and overvoltage recording
•
Measured data recording
Memory (Flash)
128 MB
Average, minimum, maximum values
•
Measured data channels
8
Alarm messages
•
Time stamp
•
Time basis average value
freely user-defined
RMS averaging, arithmetic
•
Displays and inputs / outputs
LCD display
•
Digital inputs
2
Digital outputs (as switch or pulse output)
2
Thermistor input (PT100, PT1000, KTY83, KTY84)
•
Voltage and current inputs
each 4
Password protection
•
Peak load management (optionally 64 channels)
•
Software GridVis®-Basic*1
Online and historic graphs
•
Databases (Janitza DB, Derby DB); MySQL, MS SQL with higher GridVis® versions)
•
Manual reports (energy, power quality)
•
Graphical programming
•
Topology views
•
Manual read-out of the measuring devices
•
Graph sets
•
Programming / threshold values / alarm management
Application programs freely programmable
7
Graphical programming
•
Programming via source code Jasic®
•
Type of measurement
Constant true RMS
Up to 40th harmonic
Nominal voltage, three-phase, 4-conductor (L-N, L-L)
277 / 480 V AC
Nominal voltage, three-phase, 3-conductor (L-L)
480 V AC
Measurement in quadrants
4
Networks
TN, TT, IT
Measurement in single-phase/multi-phase networks
1 ph, 2 ph, 3 ph, 4 ph and up to 4 times 1 ph
K
KTY83
Technical data
24V
DC
- +
S0 pulse generator
1,5k
Measured voltage input
Overvoltage category
300 V CAT III
Measured range, voltage L-N, AC
(without potential transformer)
10 … 600 Vrms
Measured range, voltage L-L, AC
(without potential transformer)
18 … 1,000 Vrms
Resolution
0.01 V
Impedance
4 MOhm / phase
Frequency measuring range
45 ... 65 Hz
Power consumption
approx. 0.1 VA
Sampling frequency
20 kHz / phase
Transients
> 50 µs
Comment:
For detailed technical information please refer to the operation manual and the Modbus address list.
• = included - = not included
*1 Optional additional functions with the packages GridVis®-Professional, GridVis®-Enterprise and GridVis®-Service.
6
Fig.: Example temperature input (KTY83) and
S0 pulse transducer
UMG 604
Measured current input
A
RS485 Bus
B
AB
A
B
Rated current
5A
Resolution
1 mA
Measurement range
0.001 … 8.5 Amps
Overvoltage category
300 V CAT III
Measurement surge voltage
4 kV
Power consumption
approx. 0.2 VA (Ri = 5 MOhm)
Overload for 1 sec.
100 A (sinusoidal)
Sampling frequency
20 kHz
Digital inputs and outputs
Fig.: RS485 interface, 2 pin plug contact
Number of digital inputs
2
Maximum counting frequency
20 Hz
Input signal present
18 ... 28 V DC (typical 4 mA)
Input signal not present
0 ... 5 V DC, current < 0.5 mA
Number of digital outputs
2
Switching voltage
max. 60 V DC, 30 V AC
Switching current
max. 50 mA Eff AC / DC
Output of voltage dips
20 ms
Output of voltage exceedance events
20 ms
Pulse output (energy pulse)
max. 20 Hz
Maximum cable length
up to 30 m unscreened, from 30 m screened
Mechanical properties
Weight
350 g
Device dimensions in mm (H x W x D)
90 x 107.5 x approx. 82
Battery
Type Lithium CR2032, 3 V
Protection class per EN 60529
IP20
Assembly per IEC EN 60999-1 / DIN EN 50022
35-mm DIN rail
Connecting phase (U / I),
Single core, multi-core, fine-stranded
Terminal pins, core end sheath
0.08 to 2.5 mm²
1.5 mm²
Environmental conditions
Temperature range
Operation: K55 (-10 ... +55 °C)
Relative humidity
Operation: 5 to 95 % (at 25 °C)
Operating height
0 ... 2,000 m above sea level
Degree of pollution
2
Installation position
user-defined
Electromagnetic compatibility
Electromagnetic compatibility of
electrical equipment
Directive 2004/108/EC
Electrical appliances for application within
particular voltage limits
Directive 2006/95/EC
Equipment safety
Safety requirements for electrical
equipment for measurement, regulation, control
and laboratory use –
Part 1: General requirements
IEC/EN 61010-1
Part 2-030: Particular requirements for
testing and measuring circuits
IEC/EN 61010-2-030
Noise immunity
Industrial environment
IEC/EN 61326-1
Electrostatic discharge
IEC/EN 61000-4-2
Voltage dips
IEC/EN 61000-4-11
Emissions
Class B: Residential environment
IEC/EN 61326-1
RFI Field Strength 30 – 1,000 MHz
IEC/CISPR11/EN 55011
Radiated interference voltage 0.15 – 30 MHz
IEC/CISPR11/EN 55011
Safety
Europe
CE labelling
USA and Canada
UL variants available
Firmware
Firmware update
Update via GridVis® software.
Firmware download (free of charge)
from the website:
http://www.janitza.com/downloads/
Comment:
For detailed technical information please refer to the operation manual and the Modbus address list.
• = included - = not included
7
UMG 604
UMG 511
Switch
Class A power quality analyser
Report generator according to
standard EN 50160 etc.
Power quality monitoring
Harmonic analysis
Communication using TCP/IP
Internet
UMG 508
Ethernet
Multifunctional quality analyser
Monitoring of power supplies
Monitoring of short-therm interruption
Computer environment
Programming and assessment software GridVis®
Cost centre data collection
Power quality
Analysis tools
Database management
Alarm management
User administration
Multifunctional power analysers
Cost centre analysis
Energy data collection and reporting
UMG 508Emax
Peak demand
management
UMG 96RM
Multifunctional power analyser
Measurement, monitoring and control of electrical data
Energy data collection
UMG 104
Modbus
Energy meter
Monitoring of power quality
Energy data collection and reporting
UMG 103
Universal measuring
instrument
Cost centre data collection
Limit value monitoring
8
UMG 20CM
RCM and energy meter
Operating and residual current
monitoring
Energy data collection
ProData®
Data logger
Data collector for media consumption
Energy data collection
Prophi®
Power factor
correction
Modbus
UMG 604 / UMG 96RM-E
Smart Energy &
Power Quality Solutions
Janitza electronics GmbH
Vor dem Polstück 1
D-35633 Lahnau
Deutschland
Marketing partners
Tel.: +49 6441 9642-0
Fax: +49 6441 9642-30
[email protected]
www.janitza.com
Edition 03/2014 • All rights to technical changes are reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement