Triarch 32782-24 Decorative Lighting Fixture Assembly Instructions

Assembly Instructions
Ё FIXTURE LOGP y 10
ITEM NO. : Sa
32782-24 Bl HEXNUT (8)
т САР[8)
ME ZZ COLUMN (7)
HEX NUT (11) = —— CHECKRING (5)
e [8 | — HOUSINGIS)
LOCK WASHER (12) e — CHECKRING(5)
ARM (13) — > TUBE COVER(4)
BALL NUTS [14 |
— —— SPACERTUBE (3)
RUBBER WASHER { 15) || |
| NIPPLE WITH
GLASS PANEL (16) ¿ W-— HEXNUT (2)
BALL NUTS (18) —— 1 == | —— COUPLNG (1)
IL
SCREWS {17} | IS
COUPLING (18) — = к SOCKET
SCREW (19) — À
NIPPLE ‘WITH
HEX NUT { 20} Na =
SPACER TUBE ( 21 ) Nes а, — FRAME (25)
TUBE COVER (22) x — STEEL WASHER { 26)
fr
RUBBER WASHER {23 ) = MER NA кет)
GLASS SHADE (24) —" LA Awa)
= FINIAL { 29)
1. Carefully remove the fixture out of the carton,and check that all parts are included referring to
the above illustration. Make sure not to misplace any parts that are needed for the installation;
2. Thread the nipple (2) into the coupling (1) and secure It with hex nut.
3. Assemble the ARM (13) onto the housing (6) & lock washer (12), and lock it place by
hex nut (11).
à. Slide the spacer tube (3), tube cover (4), check ring (5), housing (6), column (7), cap (8),
onto the nipple (2), then secure them with hex nut (9).
Thread the fixture loop (10) onto the nipple (2) tightly.
. Thread the nipple (20) into the coupling (18) and secure it with hex nut.
Slide the spacer tube (21), tube cover (22), rubber washer (23), glass shade (24), steel
washer (26) onto the nipple (20), and secure them with hex nut (27).
8. Slide the frame (25) onto the nipple (20), and install the screws (19) into the hole on
the ARM (13), then fix it by ball nuts (14).
9. Secure the cap (28) onto the nipple (20), then fix it by the finial (29).
10. Install proper bulb { not included ).
11. Install the glass panel (16) rubber washer (15) onto the screws (17 ),
then secure them with ball nuts (14),
1 0 CA
">