Wireless TV Streaming Kit Quick Start Guide Introduction Package Contents Using the Transmitter and Headphones with a TV Thank you for choosing Aluratek’s Wireless TV Streaming Kit. In no time you will be able to use the Bluetooth Transmitter and Bluetooth Headphones together to listen to rich hi-fidelity stereo sound from your TV - wirelessly! Your order has been carefully packaged and inspected. The following accessories should be included in your package. Please inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you discover a problem, please contact us immediately for assistance. Use the Bluteooth Transmitter to transmit audio wirelessly from your TV to the Bluetooth headphones. Please, read this guide thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit and / or any of the devices it connects to. 1 In addition to making sure only quality materials are used for manufacturing, Aluratek is also dedicated to provide the best customer satisfaction and support. The product focus of Aluratek is to bring simple yet elegant connectivity solutions to the consumers to enhance their consumer electronics, communications and computing experience. Each product is carefully designed with the consumer in mind. Each product is solution-driven to address the need of the consumers and deliberately planned to provide the ultimate user experience. aluratek.com model ABT01FKIT qsg Q10402 There are two ways to connect the Transmitter: USB Charging Cable (x2) RCA-Y Cable Connect the Transmitter to the AUX OUT / headset (3.5mm) port on the back of your TV. 3.5 mm Cable AUX OUT / 3.5 mm headset port We hope you enjoy your Aluratek product. Thank you - Aluratek, Inc. Registration Card Copyright © 2016 Aluratek, Inc. All Rights Reserved. Bluetooth Transmitter - Product Highlights Bluetooth Transmitter - Device Operation Bluetooth Transmitter - Device Operation (using with other devices) 3.5 mm Stereo Jack Connect to any audio output device with an AUX OUT / headset (3.5 mm) port or connect to any device with RCA OUT (RCA cable included) Charging the battery The battery is not fully charged and it is highly recommended that you charge ABT01F before you begin using it. Note: The pairing mode will last 2 minutes. ABT01F will power off automatically if no devices can be connected within 2 minutes. Note: Using ABT01F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged. Connect the USB end of the cable provided to your PC or USB power adapter (not included) and the charger plug to the charging jack of ABT01F. Please charge the battery for a minimum of (3) hours. The Red LED will be on while charging. When charging is complete, the red LED will turn off. LED status indicator Charging port (cable Included) Power ON / OFF / Pairing Button Note: If you want to use ABT01F while charging, please make sure to connect the charging cable first before powering on ABT01F. Bluetooth Headphones - Product Highlights Answer Call / End Call / Power ON / Power OFF / Pair Bluetooth Device / Play / Pause Adjustable Headband Micro USB Charging Port Microphone 3.5 mm LINE IN port Function Operation LED Indicator Power On Press and hold Power button for 3-5 seconds Blue LED Power Off Press and hold Power button for 5-7 seconds Red LED turns to Blue LED Enter Pairing Mode Ensure ABT01F is turned Off. Press and hold Power button for 8-10 seconds until LED flashes red and blue alternately LED flashes red and blue alternately Pairing with Bluetooth receivers such as speaker, earbud, and headset: Please make sure the device supports A2DP profile. The pairing procedure will vary depending on the actual device. Please refer to the user guide of your device for detail instruction. The general pairing procedures are as follows: 1. Make sure ABT01F is turned Off. 2. Activate your device’s Bluetooth function and set your device to pairing mode. 3. Activate ABT01F pairing mode by holding the power button for 8-10 seconds (LED flashes red and blue alternately). 4. ABT01F and your Bluetooth device will pair automatically (Please make sure they are next to each other). 5. After conneting successfully, the blue LED will flash. Note: ABT01F will try to reconnect to the last paired device when it is powered ON / OFF again or when it is out of range. Note: ABT01F will not receive any control / feedback from the connected device. Any function on the connected device such as play / pause will not work on the transmitter. 2 Connect the Transmitter using the RCA-Y cable. When using the included RCA cable to connect to a TV or tuner / receiver, please make sure you connect to the RCA OUT. Some TV’s may not have an RCA OUT. Connecting to the RCA IN will not work. RCA-IN / Line-In RCA-OUT / Line-Out The Transmitter and Headset are pre-paired and ready for use out of the box. Simply power on both devices and enjoy! Note: Your paired device will auto connect to ABT01F. This may take a few seconds to two minutes to reconnect depending on your device. Note: ABT01FKIT will try to reconnect when it is powered ON / OFF again or when it is out of range. Bluetooth Headphones - Device Operation Bluetooth Headphones - Device Operation (using with other devices) Using the Transmitter with Other Devices Charging the battery The battery is not fully charged and it is highly recommended that you charge ABT01FKIT before you begin using it. Note: The pairing mode will last 2 minutes. ABT01FKIT will switch to the standby mode automatically if no devices can be connected within 2 minutes. Add Bluetooth transmitting functionality to any audio output device with a 3.5 mm AUX OUT / headset output / RCA output jack to Bluetooth enabled headphones and speakers. Note: Using ABT01FKIT “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged. Connect the larger USB end of the provided cable to your computer / power adapter. Connect the micro smaller micro USB end to the USB port of ABT01FKIT. Please charge the battery for a minimum of 6 hours. The Red LED will be on while charging. When charging is complete, the red LED will turn Blue. Function Operation LED Indicator Enter Pairing Mode Ensure ABT01FKIT is turned OFF. Press and hold button for 6 seconds. Red and Blue LED flashes rapidly Pairing with the transmitter such as iPhone, smartphone, and tablet: The pairing procedure will vary depending on the actual device. Please refer to the user guide of your device for detail instruction. The pairing procedures are as follows: 1. Make sure ABT01FKIT is powered off. 2. Activate ABT01FKIT pairing mode by press and hold the button for 6 seconds. (Red and Blue LED will flash rapidly) 3. Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select ABT01FKIT when it is found. 4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you are prompted for PIN, please enter “0000”. 5. If prompted by your device to connect, please select “Yes”. 6. After connecting successfully, the blue LED will flash every 3 seconds. TV & Stereo Receivers TV Power On / Off Press and hold the LED flashes. button until the red Red then Off Radio and TV Interference Statement Warranty If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device. WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Aluratek warrants this product against defect in material or workmanship for 1 YEAR from the date of purchase. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference. Motorcycle Or connect to any device with RCA OUT (RCA cable included). Technical Support E-mail: [email protected] Web: www.aluratek.com/helpdesk Local (Irvine, CA): 714-586-8730 Toll free: 1-866-580-1978 MP3 Player Connect to any audio output device with an AUX OUT (3.5 mm) or headset port (3.5 mm). Note: Please make sure the audio output is set to Bluetooth / ABT01FKIT for audio streaming from the device. LED Indicator Volume Control / Next / Previous Track Computer This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has been removed or altered on the product. This warranty does not cover: A) Cosmetic damage or damage due to acts of God B) Accident, misuse, abuse, negligence or modification of any part of the product. C) Damage due to improper operation or maintenance, connection to improper equipment, or attempted repair by anyone other than Aluratek. D) Products sold AS IS or WITH FAULTS. IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR IT'S DOCUMENTATION. Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's products, contents or use of this documentation and all accompanying software, and specifically disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek reserves the right to revise or update it's product, software or documentation without obligation to notify any individual or entity. Bluetooth Transmitter Transmit audio up to 33’ away to any Bluetooth audio device. Bluetooth Earbuds Works up to 10 hours on a full charge. Bluetooth Headphones Bluetooth Speakers
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021