Channel Vision 3102 Instruction manual
Channel Vision 3102 is a block filter used to pass lower channels below cable channels below 60, 78, 105, 118 or a channel of your choice and block (clean up) frequencies above that channel. These filters are used to remove unwanted cable company or interference. They provide the best quality picture on the channel you wish to modulate and prevent a callback by using a low pass filter on every installation.
Advertisement
Advertisement
Custom frequencies available upon request.
CVT Modulator
pass filter on every installation. a callback by using a low
HS-2 quality picture on the channel you wish to modulate. Prevent ence. These filters will provide the best company or interfer that channel. Use these filters to remove unwanted cable channel of your choice and block (clean up) frequencies above
3102 Filter
118 or a channels below cable channels below 60, 78, 105,
Signal
Cable Company
Channel Vision’s block filters are used to pass all lower
Filter Description:
: 3102-78 would be clean after channel 82. channels beyond the filter channel. IE ted channel to verify picture is clean snow, without any lines or interference at four to amplification or modulator combiner.
the filter on the incoming cable line
into the system.
installation diagram below.
Note: See
Instructions:
Look at selec
Insert modulator into the system and check
filter
Look at selected channel prior to inserting
Connect prior
Step 1:
Step 2:
Step 4:
Step 3: rals-
-mind, and improved qua -of line entry systems, B&W and color su tion of surround sound audio to multiple tribution components, with over 240 products
Channel Vision Technology is a manufacturer of video di zones. theater distribu
Cat 5 distribution panels for structured wiring and home veillance cameras, flush mount cameras, modular RF and distribution, phonetors with stereo audio for multi-room video ity of life. Product line includes: broad line of RF modul including convenience, peace
Channel Vision
Limited Warranty
Channel Vision Technology will repair or replace any defect in material or workmanship which occur during normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from the date of original purchase. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty extends only to the original purchaser.
A purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling (714) 424-6500. A Return Authorization number must be obtained in advance and be marked on the outside of the shipping carton.
This warranty gives you specific legal rights, and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision, your dealer, or any factoryauthorized service center.
Models
3102-60, 3102-78,
3102-105, 3102-118
&
3102-Custom
Block Filter
234 F ISCHER A VENUE l C OSTA M ESA , CA 92626
(714) 424-6500 l (800) 840-0288 l (714) 424-6510 FAX
HTTP :// WWW .
CHANNELVISION .
COM l E-M AIL : SALES @ CHANNELVISION .
COM
© 2001, Channel Vision™

Public link updated
The public link to your chat has been updated.
Advertisement