User manual | Thermometers - ETI Downloads

Thermometers
for catering & food processing
2016
specialists in the design & manufacture of temperature measuring equipment for over 30 years
ordering from ETI
information
Since our launch in 1983 Electronic Temperature
Instruments Ltd (ETI) has developed a reputation
as a British manufacturer and supplier of quality
and value-for-money instrumentation.
product guarantee
FREE UK MAINLAND DELIVERY
WHEN YOU SPEND £40 OR MORE
carriage & packing charges
Orders made up of standard items will be despatched
immediately from stock and can take up to three/five working
days for delivery via Royal Mail or national carrier.
The company reserves the right to charge extra delivery charges
for any abnormal size, overweight or multiple packages.
All ETI manufactured instruments (those shown
with the 'Made In Britain' logo, as above) carry
a two-year guarantee against defects in either
components or workmanship. During this
period, products that prove to be defective will,
at the discretion of ETI, be either repaired or
replaced without charge. Instruments that have
not been manufactured by ETI will be subject
to a guarantee period of twelve months. Such
guarantees do not apply to sensors/probes,
where a six-month period is offered. This
six-month period also applies to a sensor/probe
where it is an integral part of an instrument.
The product guarantee does not cover damage
caused by fair wear and tear, abnormal storage
conditions, incorrect use, accidental misuse,
abuse, neglect, misapplication or modification,
or use with non-ETI hardware/software. Further
guarantee information can be obtained from
our website.
Full details of liability are available on our
website within ETI's terms and conditions of sale,
at www.etiltd.com/terms. In line with our policy
of continuous development, we reserve the
right to amend our product specification
without prior notice.
quality
ETI's Quality Management System is assessed
to ISO 9001:2008 by the British Standards
Institution. As part of our policy of continuous
product development we reserve the right to
change specifications at any time.
how to order
You can order via our secure website,
alternatively contact our sales office who will
be happy to assist.
If you have previously ordered from us, please
quote your customer account reference when
placing an order. This can be found on your
last delivery note or invoice.
to all UK mainland addresses per shipment
The carriage charges below are a general guide for delivery to
UK mainland addresses, including the Isle of Wight.
via Royal Mail or carrier
order value up to £39.99.......................................... £5.00
order value £40.00 or above................. FREE OF CHARGE
next day via carrier to mainland UK address
anytime next day - add to the above prices..................£5.00
before noon - add to the above prices......................£15.00
before 10:30am - add to the above prices................£20.00
Saturday am delivery - add to the above prices..........£30.00
To guarantee your order for next day delivery by carrier, orders
must be received before 1:00pm. Next day delivery is not
available for off-shore and remote delivery addresses.
Northern Ireland, Scottish Highlands & offshore
islands - postcodes BT, AB, IV, PA, PH, DD, TR,
HS, KW, ZE & IM
two/three day service (maximum weight limit 25 kilos)
for all orders up to a value of £999.99.....................£12.75
order value £1000.00 or above.............................. £15.00
Channel Islands - postcodes GY & JE
two/three day service (maximum weight limit 10 kilos)
for all orders up to a value of £999.99.....................£26.00
order value £1000.00 or above...............................£30.00
above 10 kilos............................ please request a quotation
damaged or lost goods
If your order is damaged in transit or incomplete, please advise
us in writing, within seven days of receipt of your order. If your
order does not arrive within ten days of the due date or the date
you placed the order, please advise us by telephone or email.
copyright
© 2015 All content in this catalogue is copyright of
Electronic Temperature Instruments Ltd, ETI Ltd. ETI retains the
design and manufacturing copyrights for all goods. ETI owns
full copyright in respect of all content, text and images in or on
its catalogues, websites and emails and their reproduction in
part or in whole is prohibited without ETI's prior written consent.
All prices quoted within the catalogue are exclusive of carriage and VAT at the standard rate.
2
tel: 01903 202151
email: [email protected]
Product
Spotlight for 2016
SuperFast Thermapen® 4
Thermometer
p4
ThermaQ® Two-Channel
Thermometer
p14
p19
Sous Vide
Thermometer Kits
RayTemp® 2
IR Thermometer
p22
DishTemp® Dishwasher
Thermometer
p29
UKAS Calibrated Fridge/
Freezer Thermometer
p31
p37
DOT - Digital Oven
Thermometer
Colour-Coded Milk
Dial Thermometers
www.etiltd.com
p38
Contents
description page no.
anti-bacterial wipes______________________39
bi-metal dial thermometers_________32, 36, 38
CaterTemp®/Plus thermometers_____________11
ChefAlarm® thermometer & timer___________35
colour-coded thermometers________ 4-6, 9, 29
Combo infrared thermometer______________23
cooking thermometers_________________35-37
data-loggers_________________________24-26
DishTemp® dishwasher thermometer_________29
dishwasher safe thermometer___________29-30
DOT - digital oven thermometer____________37
EcoTemp® thermometer___________________28
Food Check thermometer__________________ 9
fridge or freezer thermometers__________31-33
frying thermometer_______________________38
Gourmet thermometer____________________29
infrared thermometers_________________22-23
kits ________________________________18-19
log books______________________________39
meat dial thermometers___________________38
milk frothing dial thermometers_____________38
Multi-Function thermometer_______________28
oven thermometers____________________35-37
pocket-sized thermometers__4-5, 23, 27, 29-30
probes - K thermocouple__________________17
probes - NTC thermistor__________________13
ProbeWipes_____________________________39
RayTemp® infrared thermometers________22-23
Reference® thermometers__________________20
Saf-T-Log® thermometer___________________15
Sous Vide thermometer kits________________19
TempTest® thermometers _________________ 7-8
Therma 1, 3 & Elite thermometers__________16
Therma 20 thermometer__________________12
ThermaCheck/Plus thermometers___________10
ThermaData® loggers_________________24-26
ThermaLite® thermometers__________________ 6
Thermamite® thermometer__________________ 9
Thermapen® thermometers________ 4-5, 19-20
ThermaQ® thermometer__________________14
thermistor test caps_______________________12
ThermoPop® thermometer_________________27
timers_______________________________34-36
UKAS Temperature Calibration_____________21
waterproof thermometers__ 4, 7-8, 10-11, 15, 30
FREE UK delivery over £40
contents
2016
products
NEW
3
catering
thermometers
SuperFast Thermapen® 4
digital thermometer
l patented, automatic 360° rotational display
l reaches temperature in just 3 seconds
l auto intelligent backlit display
l waterproof to IP66/67
The SuperFast Thermapen is the UK’s
number one selling food thermometer
measuring temperature over the range of
-49.9 to 299.9 °C. Used by hundreds of thousands
of people worldwide, it offers a combination of speed,
accuracy and convenience of use.
Using advanced technology the new Thermapen 4 includes a number of innovative features. The patented 360°
self-rotating display can be used in any position, in either hand. The unit incorporates an intelligent backlit display
sensing light levels, automatically turning the backlight on/off in varying light conditions. The motion-sensing sleep
mode automatically turns the Thermapen 4 on/off when set down or picked up, maximising battery life.
The casing is washable and includes 'Biomaster' additive that reduces bacterial growth and the ergonomic rubber
seal minimises the risk of the ingress of water, dust or food. As well as being waterproof to IP66/67, it is still 'probably'
the fastest reading contact thermometer on the market today . The true temperature of a product can be tested in just
three seconds. The Thermapen 4 incorporates a reduced tip, stainless steel, penetration probe (Ø3.3 x 110 mm)
that conveniently folds back through 180° into the side of the instrument when not in use.
The Thermapen 4 is powered by a single AAA battery with a life expectancy of 3000 hours in normal use, without the
backlight. Both low battery (icon) and open circuit indication are displayed, when applicable. Each Thermapen 4
is supplied with a FREE traceable certificate of calibration.
intelligent
backlit LCD
truly ambidextrous
order code
234-407
234-417
234-427
234-437
234-447
234-457
234-477
234-487
234-497
234-507
830-460
830-465
830-110
830-001
832-200
4
NEW
automatic 360° rotational display.
UK Patent No. GB 2504936
description
Thermapen 4 - grey
Thermapen 4 - white
Thermapen 4 - yellow
Thermapen 4 - green
Thermapen 4 - red
Thermapen 4 - blue
Thermapen 4 - black
Thermapen 4 - orange
Thermapen 4 - pink
Thermapen 4 - purple
protective silicone boot
silicone boot - glow in dark
protective wallet
zip pouch
wall bracket
tel: 01903 202151
£ each
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
4.50
6.50
5.00
6.00
8.50
°C
AUTO
OFF
IP66/
IP67
360°
HACCP
4
COMPATIBLE
specification
SuperFast Thermapen 4
range
-49.9 to 299.9 °C
resolution
0.1 °C or 1 °C - user selectable
accuracy
±0.4 °C (-49.9 to 199.9 °C) otherwise ±1 °C
battery
1 x 1.5 volt AAA
battery life
3000 hours (normal use, without backlight)
sensor type
K thermocouple
display
15 mm (horizontal) & 11mm (vertical) LCD
dimensions
19 x 50 x 157 mm
weight
120 grams
FREE traceable certificate of calibration included
email: [email protected]
digital thermometer
l FREE traceable certificate of calibration
l 2 year guarantee
The SuperFast Thermapen 3 thermometer incorporates a large
digital display with a precise read-out of temperature over the
range of -49.9 to 299.9 °C with a 0.1 °C resolution and an
accuracy of ±0.4 °C. The resolution can be switched to 1 °C,
if required.
The casing is washable and includes 'Biomaster' additive that reduces
bacterial growth such as MRSA and E.coli, the ergonomic rubber seal
also minimises the risk of the ingress of water, dust or food. As well
as being splashproof, it is still 'probably' the fastest reading contact
thermometer on the market today. The true temperature of a product
can be tested in just three seconds.
The Thermapen incorporates a reduced tip, stainless steel, food
penetration probe (Ø3.3 x 115 mm) that conveniently folds back
through 180° into the side of the instrument when not in use.
order code
231-217
231-227
231-237
231-247
231-257
830-260
830-265
830-110
830-001
832-200
description
Thermapen 3 - white
Thermapen 3 - yellow
Thermapen 3 - green
Thermapen 3 - red
Thermapen 3 - blue
protective silicone boot
silicone boot - glow in dark
protective wallet
zip pouch
wall bracket
£ each
40.00
40.00
40.00
40.00
40.00
4.00
6.50
5.00
6.00
8.50
°C
AUTO
OFF
HACCP
4
COMPATIBLE
specification
SuperFast Thermapen 3
range
-49.9 to 299.9 °C
resolution
0.1 °C or 1 °C - user selectable
±0.4 °C (-49.9 to 199.9 °C) otherwise ±1 °C
accuracy
battery & life
2 x 3 volt CR2032 - 1500 hours
sensor type
K thermocouple
display
14.3 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
FREE traceable certificate of calibration included
catering
thermometers
SuperFast Thermapen® 3
Pro-Surface Thermapen® 3
ideal for grills & hotplates
The Pro-Surface Thermapen 3 thermometer measures the
temperature of grills, hotplates, and other surfaces over the
range of -49.9 to 299.9 °C with a user-selectable resolution
of 0.1 or 1 °C. The Pro Surface Thermapen 3 is calibrated
"as a system" for improved accuracy.
Simply open the probe and take the reading - the pivoting
probe and swivel tip ensure perfect surface contact and
high accurate measurement. The Pro-Surface features the
same specification as the SuperFast Thermapen 3 (see above)
and includes a FREE traceable certificate of calibration.
°C
AUTO
OFF
HACCP
4
COMPATIBLE
order code description
£ each
231-279
Pro-Surface Thermapen 3
68.00
FREE traceable certificate of calibration included
www.etiltd.com
FREE UK delivery over £40
5
catering
thermometers
ThermaLite® Thermometers
with assured accuracy for life
l temperature range -39.9 to 149.9 °C, with a high accuracy
l reduced tip provides faster & more accurate readings
l ThermaLite 2 includes CalCheck 0.0 °C function
l FREE traceable certificate of calibration
The ThermaLite digital thermometers display
temperature over the range of -39.9 to 149.9 °C
with a 0.1 °C resolution and an accuracy of
±0.5 °C (-39.9 to 124.9 °C). This accuracy
is guaranteed for life, due to the instruments
advanced electronics. The ThermaLite 2 also
incorporates CalCheck and hold functions.
The thermometers weigh only 45 grams including battery, and feature a clear, easy to read LCD display with an
open circuit 'Err' and low battery indication. The ThermaLite's auto-power off facility turns the instrument off
automatically after ten minutes, maximising battery life. The thermometer is housed in a high impact ABS case and
includes 'Biomaster' additive that reduces bacterial growth such as MRSA and E.coli, ideal thermometer for routine
day-to-day food and catering applications.
The Ø3.3 x 80 mm reduced tip, stainless steel, penetration probe is ideal for measuring the temperature of food
and semi-solid materials. The ThermaLite is available in six colours, suitable for different applications.
ThermaLite 2 with CalCheck function
The ThermaLite 2 features a CalCheck 0.0 °C (±0.1 °C) function that allows the
user to verify the accuracy of the thermometer at any time, giving confidence
that measurements are accurate.
Protective Silicone Boot
order code
226-101
226-111
226-121
226-131
226-141
226-151
226-102
226-112
226-122
226-132
226-142
226-152
830-280
6
description
ThermaLite 1 - grey
ThermaLite 1 - white
ThermaLite 1 - yellow
ThermaLite 1 - green
ThermaLite 1 - red
ThermaLite 1 - blue
ThermaLite 2 - grey
ThermaLite 2 - white
ThermaLite 2 - yellow
ThermaLite 2 - green
ThermaLite 2 - red
ThermaLite 2 - blue
protective silicone boot
tel: 01903 202151
£ each
22.50
22.50
22.50
22.50
22.50
22.50
27.50
27.50
27.50
27.50
27.50
27.50
4.00
protects your instrument against accidental damage
and increases the water resistance to an IP65 rating
°C/°F
HOLD
AUTO
OFF
HACCP
Assured
Accuracy
4 4
COMPATIBLE
CAL
CHECK
specification
ThermaLite 1 & 2
range
-39.9 to 149.9 °C
resolution
0.1 °C/°F
accuracy
±0.5 °C (-39.9 to 124.9 °C)
battery
3 volt CR2032 lithium coin cell
battery life
5000 hours
sensor type
thermistor
display
10 mm LCD
dimensions
Ø29 x 196 mm (inc. probe)
weight
45 grams
FREE traceable certificate of calibration included
email: [email protected]
with 360° rotating display
l fast response probe, reaches temperature in just 3 seconds!
l patented, automatic 360° rotational display
l small, compact, waterproof (IP67) design
l auto intelligent backlit display
The TempTest 1 Smart thermometer incorporates a large, easy to read digital
display, with a precise read-out of temperature over the range of -49.9 to 299.9 °C
with a 0.1 °C/°F resolution and an accuracy of ±0.4 °C (-49.9 to 200 °C). The
thermometer will power off automatically after ten minutes, maximising battery life.
This feature can be disabled.
The thermometer is housed in a waterproof IP67 case with an ergonomic rubber seal,
both include 'Biomaster' additive to reduce bacterial growth. As well as being waterproof,
it is 'probably' one of the fastest reading contact thermometers on the market today.
The true temperature of a product can be measured in just three seconds.
Both low battery (icon) and open circuit indication are displayed, when applicable.
Each TempTest 1 is powered by two AAA batteries with a minimum life expectancy of
5000 hours in normal use without the backlight.
Each thermometer is supplied with a permanently attached, pointed stainless steel
food penetration probe (Ø3.3 x 80 mm) with fast response tip.
automatic 360° rotational display
catering
thermometers
TempTest® 1 Smart Thermometer
The TempTest 1 features an automatic 360° display, which rotates in 90° increments
enabling the user to read the temperature in any position ie. left hand, right hand,
vertical or horizontal. This feature can be 'locked' by the user, if required.
includes FREE Holster/Wall Bracket
designed specifically for the
TempTest, this plastic wall
bracket/holster ensures
safe, secure and handy
storage
HOLD
order code
221-910
830-431
830-432
830-433
830-434
830-435
830-437
description
£ each
TempTest 1 thermometer
50.00
protective silicone boot - white
4.00
protective silicone boot - yellow
4.00
protective silicone boot - green
4.00
protective silicone boot - red
4.00
protective silicone boot - blue
4.00
protective silicone boot - black
4.00
www.etiltd.com
MAX
MIN
AUTO
OFF
IP67
4
HACCP
COMPATIBLE
specification
TempTest 1
range
-49.9 to 299.9 °C
resolution
0.1 °C/°F
accuracy
±0.4 °C (-49.9 to 200 °C) otherwise ±1 °C
battery
2 x 1.5 volt AAA
battery life
5000 hours (normal use, without backlight)
sensor type
K thermocouple
display
11 mm LCD
dimensions
17 x 47 x 200 mm (inc. probe)
weight
105 grams
FREE traceable certificate of calibration included
FREE UK delivery over £40
7
catering
thermometers
TempTest® 2 Smart Thermometer
with 360° rotating display & fixed probe
l supplied with hand held, fast response penetration probe
l patented, automatic 360° rotational display
l small, compact, waterproof (IP67) design
l auto intelligent backlit display
The TempTest 2 Smart thermometer incorporates a large, easy to read
digital display, with a precise read-out of temperature over the range of
-49.9 to 299.9 °C with a 0.1 °C/°F resolution and an accuracy of ±0.4 °C
(-49.9 to 200 °C). The thermometer will power off automatically after ten
minutes, maximising battery life. This feature can be disabled.
The thermometer is housed in a waterproof IP67 case with an ergonomic
rubber seal, both include the 'Biomaster' additive to reduce bacterial
growth. As well as being waterproof, it is 'probably' one of the fastest
reading contact thermometers on the market today. The true temperature
of a product can be measured in just three seconds.
Both low battery (icon) and open circuit indication are displayed, when
applicable. Each TempTest 2 is powered by two AAA batteries with a
minimum life expectancy of 5000 hours in normal use without the backlight.
Each thermometer is supplied with a permanently attached hand held,
stainless steel food penetration probe (Ø3.3 x 100 mm) with fast response
tip and a 500 mm PVC lead.
automatic 360° rotational display
The TempTest 2 features an automatic 360° display, which rotates in 90° increments enabling the user to read
the temperature in any position ie. left hand, right hand, vertical or horizontal. This feature can be 'locked' by the
user, if required.
optional accessories
l protective silicone boots
are available in various
colours - see page 7
l anti-bacterial
wipes - see
page 39
HOLD
order code description
222-910
TempTest 2 thermometer
8
tel: 01903 202151
£ each
60.00
MAX
MIN
AUTO
OFF
IP67
4
HACCP
COMPATIBLE
specification
TempTest 2
range
-49.9 to 299.9 °C
resolution
0.1 °C/°F
accuracy
±0.4 °C (-49.9 to 200 °C) otherwise ±1 °C
battery
2 x 1.5 volt AAA
battery life
5000 hours (normal use, without backlight)
sensor type
K thermocouple
display
11 mm LCD
dimensions
17 x 47 x 120 mm
weight
140 grams
FREE traceable certificate of calibration included
email: [email protected]
thermometer & probe
l temperature range -49.9 to 299.9 °C
l 2 year guarantee
The Food Check is designed specifically for the
food and catering professional. The thermometer
will measure temperature quickly and accurately
when monitoring cooked and chilled foods as part of
HACCP and health and safety procedures.
The unit features a large, easy to read, LCD display
with open circuit and low battery indication.
Each Food Check is supplied with a permanently
attached food penetration probe with a 130 mm
stainless steel stem and 500 mm PVC lead.
order code
221-018
221-028
221-038
221-048
221-058
830-221
832-050
description
Food Check - white
Food Check - yellow
Food Check - green
Food Check - red
Food Check - blue
protective silicone boot - white
s/steel wall bracket & boot
£ each
55.00
55.00
55.00
55.00
55.00
6.00
12.00
°C
AUTO
OFF
HACCP
4
COMPATIBLE
specification
Food Check
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-50 to 199 °C) otherwise ±1 °C
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
Thermamite® Thermometer
catering
thermometers
Food Check
complete with food penetration probe
l FREE traceable certificate of calibration
l compact & robust design
The Thermamite thermometer offers accuracy, flexibility and ease of use,
coupled with the durability and reliability that is required by the food and
catering industry in helping to meet today's food hygiene legislation.
The thermometer incorporates a clear LCD display with a precise read-out
of temperature over the range of -50 to 300 °C with a 1 °C resolution. Low
battery and open circuit indication are also displayed. The unit will
power off automatically after ten minutes, maximising battery life.
Each thermometer is supplied with a permanently
attached pointed, stainless steel food penetration
probe (Ø3.3 x 100 mm) and 500 mm PVC lead.
order code
261-010
261-020
261-030
261-040
261-050
830-221
832-050
description
Thermamite - white
Thermamite - yellow
Thermamite - green
Thermamite - red
Thermamite - blue
protective silicone boot - white
s/steel wall bracket & boot
www.etiltd.com
£ each
45.00
45.00
45.00
45.00
45.00
6.00
12.00
°C
AUTO
OFF
HACCP
4
COMPATIBLE
specification
Thermamite
range
-50 to 300 °C
resolution
1 °C
accuracy
±1 °C ±0.1 %
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
FREE UK delivery over £40
9
catering
thermometers
ThermaCheck Thermometer
complete with thermistor penetration probe
l assured accuracy for the life of the thermometer
l high system accuracy ±0.4 °C
The ThermaCheck thermistor thermometer has been
specifically designed for use in the catering and
food processing industries to cope with routine
day-to-day usage.
The instrument is housed in an ergonomic, robust
ABS case that includes 'Biomaster' additive to reduce
bacterial growth. The thermometer's auto-power off
facility turns the instrument off automatically after
ten minutes.
The ThermaCheck thermometer is supplied complete
with a permanently attached food penetration
probe with a 130 mm stainless steel stem and
one metre coiled PU lead.
order code
226-042
830-221
832-050
description
ThermaCheck
protective silicone boot - white
s/steel wall bracket & boot
£ each
70.00
6.00
12.00
°C
HACCP
AUTO
OFF
Assured
Accuracy
4 4
COMPATIBLE
specification
ThermaCheck
range
-39.9 to 149.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-20 to 70 °C)
battery & life
3 x 1.5 volt AAA - 20000 hours
sensor type
thermistor
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
220 grams
FREE traceable certificate of calibration included
ThermaCheck Plus
waterproof thermometer & probe
l robust waterproof case offering IP66/67 protection
l backlight, auto-off, max/min & hold functions
The ThermaCheck Plus thermistor thermometer utilises
state of the art electronic circuitry, designed for reliability
and ease of use and can be submerged or washed
under a running tap - ideal for both catering and food
processing applications where cleaning is paramount.
The instrument is housed in an ergonomic, ABS case
that includes 'Biomaster' additive to reduce bacterial
growth. Each ThermaCheck Plus has an integrated
rubber seal to ensure complete water resistance and
helps to reduce the possibility of damage in harsh
environments.
Each unit is supplied complete with a permanently
attached food penetration probe with a 130 mm
stainless steel stem and one metre coiled PU lead.
order code description
232-042
ThermaCheck Plus
830-231
protective silicone boot - white
10
tel: 01903 202151
£ each
95.00
7.00
HOLD
MAX
MIN
AUTO
OFF
IP66/
IP67
4
HACCP
COMPATIBLE
specification
ThermaCheck Plus
range
-39.9 to 149.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-10 to 70 °C)
battery
3 x 1.5 volt AAA - 10000 hours
sensor type
thermistor
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
298 grams
FREE traceable certificate of calibration included
email: [email protected]
thermometer & probe
l FREE traceable certificate of calibration
l 2 year guarantee
The CaterTemp professional digital thermometer
is designed with the catering and food processing
industry in mind and incorporates a combination
of proven circuitry and durability. The thermometer
is housed in a robust ABS case that contains
'Biomaster' additive which reduces bacterial growth
such as MRSA and E.coli.
The CaterTemp is powered by three AAA batteries
that give a minimum of five years battery life and
will power off automatically after ten minutes.
Each thermometer is supplied with a permanently
attached food penetration probe with a 130 mm
pointed, stainless steel stem and one metre coiled
PU lead.
order code
221-046
830-227
832-053
description
CaterTemp
protective silicone boot - black
s/steel wall bracket & boot
£ each
65.00
6.00
12.00
°C
HOLD
AUTO
OFF
HACCP
4
COMPATIBLE
specification
CaterTemp
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-50 to 199 °C) otherwise ±1 °C
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
CaterTemp® Plus Thermometer
catering
thermometers
CaterTemp®
robust, waterproof & salt resistant
l extruded aluminium case for superior durability
l waterproof case offering IP66/67 protection
The CaterTemp Plus thermometer incorporates the
latest microprocessor technology with improved
durability, designed for reliability and ease of use in
day-to-day catering and food processing applications.
The thermometer incorporates a secure battery
compartment with a waterproof cover and is
supplied with a permanently attached, waterproof,
heavy duty, penetration probe with a Ø3.3 x 130 mm
stainless steel stem and one metre PU coiled lead.
Available with a choice of colour-coded rubber
seals that can help avoid cross-contamination.
order code
221-056
221-256
221-356
221-456
221-556
830-242
832-150
description
CaterTemp Plus - black seal
CaterTemp Plus - yellow seal
CaterTemp Plus - green seal
CaterTemp Plus - red seal
CaterTemp Plus - blue seal
protective PVC boot - black
acrylic wall bracket
www.etiltd.com
£ each
115.00
115.00
115.00
115.00
115.00
8.50
9.00
HOLD
IP66/
IP67
AUTO
OFF
HACCP
4
COMPATIBLE
specification
CaterTemp Plus
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C ±1 digit
battery & life
9 volt PP3 alkaline - 5000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
35 x 60 x 115 mm
weight
244 grams
FREE traceable certificate of calibration included
FREE UK delivery over £40
11
catering
thermometers
Therma 20 Thermometer
for high accuracy readings
l assured accuracy for the life of the thermometer
l meets the European Standard EN13485
l FREE traceable certificate of calibration
l 2 year guarantee
The Therma 20 thermistor thermometer has been specifically designed for use in the
catering industry with HACCP and health and safety procedures in mind.
The instrument displays temperature to 0.1 °C over the range of -39.9 to 149.9 °C
with a high system accuracy of ±0.4 °C (-10 to 70 °C). This accuracy is guaranteed
for life, due to the instrument's advanced electronics. The Therma 20 features an
easy to read, LCD display with low battery indication. The thermometer can be
used in low ambient working temperatures down to -20 °C, which meets the
requirements of the European Standard EN13485 for the temperature monitoring
of food through the supply chain, from transport to storage to point of sale.
The instrument is housed in an ergonomic, robust ABS case that includes 'Biomaster' additive
which reduces bacterial growth. The thermometer's auto-power off facility turns the instrument
off automatically after ten minutes. The Therma 20 incorporates an easy to use Lumberg
screw-locking connector, allowing a wide range of interchangeable probes to
be used. We offer an extensive range of interchangeable thermistor
probes, see opposite page for details.
optional accessories
lthermistor test caps with
UKAS
Certificate
of
Calibration are available
for checking the accuracy
of
the
Therma
20
thermometer, see below
for details or visit our website
silicone boot - the Therma 20 is
splashproof to IP64 when used in conjunction
with this boot. Various colours are available - visit
our website for further details
lprotective
°C
order code description
£ each
226-040
Therma 20
65.00
286-001
thermistor test cap -18 °C
33.00
286-002
thermistor test cap 0 °C
33.00
286-003
thermistor test cap 3 °C
33.00
286-004
thermistor test cap 70 °C
33.00
286-005
thermistor test cap 100 °C
33.00
830-221
protective silicone boot - white
6.00
832-050
s/steel wall bracket & boot
12.00
the Therma 20 is exclusive of probe
12
tel: 01903 202151
AUTO
OFF
HACCP
Assured
Accuracy
4 4
COMPATIBLE
specification
Therma 20
range
-39.9 to 149.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-10 to 70 °C)
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (20000 hours)
sensor type
thermistor
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
email: [email protected]
NTC thermistor probes with lumberg connectors
penetration probe
Ø3.3 x 130 mm
penetration probe
order code
£ each
This stainless steel penetration probe is versatile
and strong and incorporates a heavy duty, ribbed,
polypropylene handle with a white end cap. Ideal
for many temperature measurement applications
including liquids, semi-solids and granular materials.
Response time less than two seconds. Probe
temperature range -40 to 150 °C.
174-166
28.50
The above penetration probe is also available
with colour-coded end caps. Response time
less than two seconds. Probe temperature
range -40 to 150 °C.





174-162
174-163
174-164
174-165
174-167
28.50
28.50
28.50
28.50
28.50
This stainless steel, fast response, hand held air
or gas probe incorporates a heavy duty ribbed,
polypropylene handle. The probe is ideal for
measuring air temperatures in refrigeration units,
storage areas and other similar applications.
Response time less than two seconds. Probe
temperature range -40 to 150 °C.
174-300
27.50
This reduced tip, fast response, stainless steel
penetration probe incorporates a heavy duty ribbed,
polypropylene handle. The probe is suitable for
liquids and soft semi-solid materials including fish,
fruit and other soft or delicate materials. Response
time less than one second. Probe temperature
range -40 to 150 °C.
174-100
31.50
This fast response, air or gas wire probe is ideal
for measuring air temperatures in fridges, freezers,
chill cabinets and similar. Supplied with a one
metre FEP lead. Response time less than one
second. Probe temperature range -40 to 150 °C.
170-372
18.50
This easy to use, flexible, fast response foil between
pack probe has been designed to measure
between packs or boxes of produce in a variety
of applications. Response time less than three
seconds. Probe temperature range 0 to 100 °C.
170-090
23.50
This frozen food probe incorporates a heavy duty
T-shaped, polypropylene handle and a corkscrew
design sensing tip. Ideal for measuring deep
frozen foods or other frozen materials. The probe
is supplied with a one metre PVC detachable
lead. Response time less than six seconds. Probe
temperature range -40 to 150 °C.
170-175
70.00
Ø3.3 x 130 mm
air or gas probe
Ø3.3 x 130 mm
fast response probe
Ø2.6 x 130 mm
air or gas wire probe
catering
thermometers
Therma 20 Thermometer Probes
Ø3.7 x 30 mm with 1000 mm FEP lead
foil between pack probe
40 x 50 mm with 1000 mm FEP lead
corkscrew probe
Ø8 x 100 mm
www.etiltd.com
FREE UK delivery over £40
13
catering
thermometers
ThermaQ® Thermometer
with two channel type K thermocouple input
l audible alarm with variable volume control
l waterproof housing offers IP67 protection
l customised high/low alarm facility
l 2 year guarantee
The ThermaQ thermometer allows the user to simultaneously
use two type K thermocouple probes whilst displaying both current
temperatures and the maximum and minimum recorded temperatures.
This allows the user to monitor, for example, both an item of food
and the oven temperature at the same time or monitor the rise and
fall of temperatures across refrigeration units.
The thermometer measures temperature over the range of -99.9 to
299.9 °C with a 0.1 °C resolution or 300 to 1372 °C with a 1 °C
resolution. The unit features a large, easy to read LCD display
with °C/°F, T1, T2, max/min, open circuit, low battery indication,
programmable high/low audible alarm and a user selectable
backlight. In normal use, battery life is 3000 hours, however this is
reduced when the sound and backlight are used.
The instrument is housed in an ergonomic, ABS case that includes
'Biomaster' additive which reduces bacterial growth. An integrated
rubber seal ensures complete water resistance and helps reduce
the possibility of damage in harsh environments.
We offer an extensive range of interchangeable type K
thermocouple probes, for a variety of different applications, see
page 17 for details or visit our website for more information.
optional accessories
l protective black silicone
boot c/w foot stand and
magnet (830-258)
l stainless steel wall bracket
(screws not supplied)
(832-015)
MAX
MIN
order code description
£ each
231-050
ThermaQ
75.00
830-258
protective silicone boot - black 12.00
832-015
stainless steel wall bracket
10.00
the ThermaQ is exclusive of probe
14
tel: 01903 202151
IP66/
IP67
4
HACCP
COMPATIBLE
specification
ThermaQ
range
-99.9 to 1372 °C
resolution
0.1 °C to 299.9 °C thereafter 1 °C
accuracy
±0.4 °C ±0.1 % of reading
battery
3 x 1.5 volt AAA
battery life
3000 hours (without backlight & alarm)
sensor type
K thermocouple
display
9.6 mm LCD
dimensions
32 x 71 x 141 mm
weight
230 grams
FREE traceable certificate of calibration included
email: [email protected]
catering
thermometers
Saf-T-Log® Thermometer
paperless temperature recording
l displays date, time & user name with each reading
l automatically archives data & creates reports
l PASS/FAIL & corrective actions displayed
l holds up to 7 checklists
Measure, store, download and print HACCP reports. No more
paper logs or complicated PDA's to train staff how to use!
The Saf-T-Log is as easy to use as your current thermometer.
The Saf-T-Log includes Windows® software to create a list of up
to 300 items that you routinely measure, 10 corrective actions,
along with up to 25 users. Each item can include a high/low
temperature limit that gives the user instant on-screen pass/fail
feedback or yes/no on non-temperature items. A time delay
feature can be added to each temperature item. Up to seven
different checklists can be created at any one time, to be saved,
emailed to other users and uploaded onto any Saf-T-Log.
Record up to 1000 readings by simply scrolling to the correct
item and pressing record. Any 'fail' or 'no answer' can prompt
the selection of a corrective action. Once readings are taken
they can be uploaded to a PC automatically when reconnected.
The data is archived and a report generated automatically
with no additional user input. The Saf-T-Log report is locked so
the data logged cannot be tampered with.
Housed in a durable, IP66/67 waterproof case with a choice
of interchangeable type K thermocouple probes, the Saf-T-Log
can be used for a wide variety of applications. The thermometer
includes a high contrast backlit display with an accuracy of
±0.4 °C and a calibration trim function.
protective boot
Create up to 10
Corrective Actions
USB Connection Point
The Saf-T-Log incorporates
a USB port which allows the
user to connect to a PC.
order code
292-701
830-231
830-232
830-233
830-234
830-235
830-237
description
Saf-T-Log
protective silicone boot - white
protective silicone boot - yellow
protective silicone boot - green
protective silicone boot - red
protective silicone boot - blue
protective silicone boot - black
the Saf-T-Log is exclusive of probe
www.etiltd.com
£ each
120.00
7.00
7.00
7.00
7.00
7.00
7.00
"The Saf-T-Log is a total innovation from ETI.
No other recording handheld system records
data this intuitively at anywhere near the price"
AUTO
OFF
IP66/
IP67
4
HACCP
COMPATIBLE
specification
Saf-T-Log
range
-100 to 1372 °C
resolution
0.1 °C
accuracy
±0.4 °C ±0.1 % of reading
battery
3 x 1.5 volt AAA
battery life
>2500 hours (without backlight)
sensor type
type K thermocouple
display
12 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
FREE UK delivery over £40
15
catering
thermometers
Therma 1, 3 & Elite Thermometers
with interchangeable thermocouple probes
l Elite model includes backlight & max/min functions
l FREE traceable certificate of calibration
l minimum 5 years battery life
l 2 year guarantee
The Therma 1 and 3 digital thermometers are rugged and easy to use instruments
that operate through the range of -100 to 1372 °C with a 0.1 °C or 1 °C
resolution. The thermometers are housed in a robust ABS case that contains
'Biomaster' additive which reduces bacterial growth such as MRSA and E.coli.
The Therma 1 and 3 feature large, easy to read, LCD displays with open circuit
'Err', hold and low battery indication. Each thermometer is powered by three
AAA batteries that give a minimum of five years battery life. The units will
power off automatically after ten minutes, maximising battery life. This feature
can be disabled by the user, if not required.
We offer an extensive range of interchangeable type K thermocouple probes
for a variety of different applications, see opposite page for details.
Therma Elite thermometer
The Therma Elite incorporates all the features of
a Therma 1 thermometer, but with the addition
of a backlit display, max/min memory function
and a mode button for the selection of 0.1/1 °C/°F.
The thermometer also incorporates a calibration
trim function (±2 °C) which allows the user to
compensate for thermocouple probe errors.
optional accessories
l protective silicone boot - the Therma series is
splashproof to IP64 when used in conjunction
with this boot. Various colours are available
- visit our website for further details
l stainless steel wall bracket (screws not supplied)
and protective black silicone boot (832-053)
HOLD
order code description
£ each
221-041
Therma 1
50.00
221-043
Therma 3
40.00
221-061
Therma Elite
60.00
830-227
protective silicone boot - black
6.00
832-053
s/steel wall bracket & boot
12.00
the Therma series is exclusive of probe
16
tel: 01903 202151
MAX
MIN
AUTO
OFF
specification
Therma 1/Elite
Therma 3
range 0.1 °C
-99.9 to 299.9 °C
range 1 °C
300 to 1372 °C
-100 to 1372 °C
resolution
0.1 °C & 1 °C
1 °C
accuracy
±0.4 °C ±0.1 %
±1 °C ±0.1 %
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
email: [email protected]
type K thermocouple
order code
£ each
This stainless steel penetration probe is strong, 123-160
versatile and ideal for measuring a wide
variety of applications including liquids and 323-160
semi-solids. Response time less than three (coiled lead)
seconds. Probe temperature range -75 to 250 °C.
27.50
This extended, stainless steel penetration probe is 123-168
versatile and ideal for measuring a wide variety
of applications including liquids and semi-solids. 323-168
Response time less than three seconds. Probe (coiled lead)
temperature range -75 to 250 °C.
32.50
This reduced tip, fast response, stainless steel 123-159
penetration probe is ideal for liquids or semisolids i.e. soft rubber and other similar materials. 323-159
Response time less than two seconds. Probe (coiled lead)
temperature range -75 to 250 °C.
30.50
29.50
Ø1.8 x 130 mm
This fast response, stainless steel, needle 123-100
penetration probe is suitable for liquids and
semi-solids including soft rubber/plastic etc. 323-100
Response time less than two seconds. Probe (coiled lead)
temperature range -75 to 250 °C.
133-170
43.50
133-173
20.50
Ø3.3 x 130 mm
This oven probe has a stainless steel handle
and a two metre PTFE high temperature lead.
Response time less than four seconds. Probe
temperature range -75 to 250 °C. An oven probe
without a handle is also available.
penetration probe
Ø3.3 x 130 mm
penetration probe
Ø3.3 x 300 mm
fast response probe
Ø3.3 x 100 mm
needle penetration probe
oven probe
ribbon surface probe
Ø15 x 130 mm
rigid between pack probe
Ø4.5 x 130 mm
penetration probes
(133-177)
Ø4 x 225 mm
33.50
31.50
30.50
(no handle)
This precision, ribbon surface probe utilises flat 123-030
ribbon technology that ensures a fast, accurate
response with minimal heat loss. Response time less 123-032
than 0.5 of a second. Probe temperature range -75 (right-angled)
to 250 °C. A right-angled version is also available.
38.00
This rigid, stainless steel between pack probe is 123-060
strong and versatile, designed specifically to measure
between packets or boxes of produce. Response 323-060
time less than three seconds. Probe temperature (coiled lead)
range -75 to 250 °C.
30.50
oven probe & crocodile clip Oven probe incorporating a crocodile clip that can
Ø4 x 20 mm with 2000 mm lead
28.50
catering
thermometers
Hand Held Temperature Probes
42.50
31.50
133-041
22.50
133-177
29.50
easily be attached to an oven rack or similar and is
ideal for monitoring oven and grill temperatures.
Supplied with a two metre stainless steel braided
lead. Response time less than ten seconds. Probe
temperature range -50 to 350 °C.
These stainless steel, pointed penetration probes
are ideal for continuous monitoring in ovens and
similar applications. Supplied with a two metre
stainless steel braided lead or stainless steel
armoured lead. Response time less than ten
seconds. Probe temperature range -50 to 350 °C.
(braided)
133-178
35.00
(armoured)
Please note: for hand held type T thermocouple probes, replace the third digit (3) of the order code with the number 7
www.etiltd.com
FREE UK delivery over £40
17
catering
thermometers
Catering Thermometer Kits
ideal for food & fridge/freezer monitoring
These thermometer and probe kits are designed for the food and catering industry. For a full specification on
the Therma 20 and Therma 3 see pages 12 and 16. A full specification on the Therma 22 can be found on our
website. These kits represent excellent value-for-money as each one is supplied in a FREE carrying case with a FREE
temperature log book and a FREE mini tub of 70 QAC free Probe Wipes.
professional catering thermometer kit 0.1 °C
each kit contains:
l
l
l
l
l
l
Therma 20 thermometer (226-040)
penetration probe (174-166)
air wire probe (170-372)
temperature log book (831-100)
mini tub of 70 Probe Wipes (836-022)
ABS carrying case (834-120)
order code description
£ each
860-120
professional catering kit
112.00
FREE traceable certificate of calibration included
food hygiene thermometer kit 0.1 °C
each kit contains:
l
l
l
l
l
l
Therma 22 thermometer (227-022)
penetration probe (177-166)
air wire probe (177-372)
temperature log book (831-100)
mini tub of 70 Probe Wipes (836-022)
ABS carrying case (834-120)
order code description
£ each
860-125
food hygiene kit
125.00
FREE traceable certificate of calibration included
budget catering thermometer kit 1 °C
each kit contains:
l
l
l
l
l
l
Therma 3 thermometer (221-043)
penetration probe (123-160)
PTFE wire probe (133-362)
temperature log book (831-100)
mini tub of 70 Probe Wipes (836-022)
ABS carrying case (834-120)
order code description
£ each
860-025
budget catering kit
74.50
FREE traceable certificate of calibration included
18
tel: 01903 202151
email: [email protected]
for precise temperature measurement
Sous Vide thermometer kit
Budget Sous Vide thermometer kit
Each kit contains a high accuracy Therma 1
thermometer, two Sous Vide needle probes (Ø1.1
x 60 and 120 mm), timer, Sous Vide foam/tape
(one metre), FREE mini tub of 70 Probe Wipes and
a FREE carrying case. For a full specification on
the Therma 1 thermometer, see page 16.
This budget thermometer and probe kit has been
specifically designed for Sous Vide cooking. Each
kit contains a high accuracy Therma 1 thermometer,
60 mm Sous Vide needle probe (133-109) and
Sous Vide foam/tape (one metre) all supplied in
a FREE zip pouch. For a full specification on the
Therma 1 thermometer, see page 16.
order code description
£ each
860-035
Sous Vide thermometer kit
145.00
133-109
spare needle probe - 60 mm
32.00
133-110
spare needle probe - 120 mm
22.00
FREE traceable certificate of calibration included
order code description
£ each
860-036
budget Sous Vide thermometer kit 100.00
600-475
Sous Vide foam/tape - one metre 22.00
FREE traceable certificate of calibration included
catering
thermometers
Sous Vide Thermometer Kits
Sous Vide Thermapen® 3
with miniature needle probe
The Sous Vide Thermapen 3 thermometer has been
specifically designed for Sous Vide cooking and areas where
precise temperature measurement is required.
This model incorporates a miniature, stainless steel needle
probe that has a Ø1.1 x 60 mm reduced tip, that
conveniently folds back through 180° into the side of the
instrument when not in use.
The Sous Vide Thermapen 3 features the same specification
as the SuperFast Thermapen 3 (see page 5) and includes
a FREE traceable certificate of calibration.
°C
AUTO
OFF
HACCP
4
COMPATIBLE
order code description
£ each
231-011
Sous Vide Thermapen 3
66.00
600-475
Sous Vide foam/tape
22.00
FREE traceable certificate of calibration included
www.etiltd.com
miniature needle probe
Please Note: This probe is
delicate and should be treated with care.
FREE UK delivery over £40
19
catering
thermometers
Reference Thermapen® 3
0.01 °C resolution, high accuracy thermometer
l ideal for calibration comparison checks
0601
l 2 year guarantee
The Reference Thermapen 3 thermometer
is a high accuracy PT100 instrument that is
supplied with a five-point UKAS Certificate of
Calibration. Each certificate indicates deviations
from standards at various check points: -18,
0, 40, 70 and 100 °C. Special points may
be certified by arrangement with our UKAS
calibration laboratory.
The unit incorporates a stainless steel,
penetration probe (Ø3.3 x 108 mm) that
conveniently folds back through 180° into the
side of the instrument when not in use.
order code description
£ each
222-213
Reference Thermapen 3
95.00
830-260
protective silicone boot
4.00
830-265
silicone boot - glow in dark
6.50
830-110
protective wallet
5.00
832-200
wall bracket
8.50
Thermapen is supplied in a zip pouch (830-001)
AUTO
OFF
UKAS
specification
Reference Thermapen 3
range
-69.99 to 199.99 °C
resolution
0.01 °C
accuracy
±0.07 °C (-30 to 149.99 °C) otherwise ±0.2 °C
battery & life
2 x 3 volt CR2032 lithium coin cell - 1000 hours
sensor type
PT100
display
12 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
a UKAS Certificate of Calibration is included
Reference Thermometers
±0.05 °C high system accuracy
l 5-point UKAS Certificate of Calibration included
l supplied complete with high accuracy probe
These Reference thermometers are high accuracy PT100 instruments
that are supplied with a five-point UKAS Certificate of Calibration.
Each certificate indicates deviations from standards at various check
points: -18, 0, 40, 70 and 100 °C. Special points may be certified
by arrangement with our UKAS calibration laboratory.
Each unit features a simple on/off push
button with open circuit and low battery
indication, when applicable. The Reference
Plus incorporates the additional features of a
max/min and hold function.
The Reference thermometers are supplied
with a permanently attached, high accuracy
probe incorporating a 1/10th DIN PT100
sensor. The probe measures Ø3.3 x 130 mm
and is supplied with a one metre PVC lead.
order code
222-055
222-063
814-132
20
description
Reference
Reference Plus
Comparator
tel: 01903 202151
£ each
200.00
235.00
32.00
0601
HOLD
MAX
MIN
AUTO
OFF
UKAS
specification
Reference & Reference Plus
range
-199.99 to 199.99 °C
resolution
0.01 °C
accuracy
±0.05 °C (-30 to 150 °C) ±0.1 °C (-50 to 200 °C)
battery
3 x 1.5 volt AAA - 2000 hours
sensor type
PT100 1/10th DIN
display
10 mm LCD
dimensions
25 x 56 x 128 mm
weight
210 grams
a UKAS Certificate of Calibration is included
email: [email protected]
in-house accredited laboratory
0601
l thermometer temperature range -100 to 200 °C
l rapid turnaround - normally within five days
l certified uncertainties from ±0.02 °C
l 1 to 5-point UKAS Certificates
Our in-house UKAS accredited calibration laboratory for
temperature has a wide measurement range of -100 to
200 °C with a calibration and measurement capability of
0.02 °C. The laboratory can also measure resistance up
to 16 MΩ (i.e. resistance decade boxes and PT100/RTD
temperature simulators) and DC voltage 0 to 200 mV
(i.e. thermocouple simulators and calibrators). Original
UKAS Certificates provide proof that instruments and
probes have been calibrated against nationally approved
standards.
thermometers & probes
Each UKAS Certificate indicates the deviations
from standards at various check points, the standard
being -18, 0, 40, 70 and 100 °C with a guaranteed
uncertainty, dependant on the probe type, see
calibration and measurement capability table below.
catering
thermometers
UKAS Temperature Calibration
test caps & simulators
Each UKAS Certificate indicates the deviations from
standards at specific check points (-18, 0, 3, 70 and
100 °C) to an uncertainty of ±0.1 °C (resistance) or
±0.15 °C (thermocouple).
data-loggers
Each UKAS Certificate indicates the deviations from
standards at three check points (-18, 0 and 40 °C)
to an uncertainty of ±0.04 °C.
standard certificate uncertainty
thermistor thermometer & probe
-50 to 150 °C
CMC 0.04 °C
CMC 0.13 °C
-100 to -50 °C
PT100 (resistance sensors) thermometer & probe
-50 to 200 °C
CMC 0.04 °C
CMC 0.13 °C
-100 to -50 °C
thermocouple thermometer & probe
-50 to 120 °C
CMC 0.15 °C
CMC 0.13 °C
-100 to -50 °C
CMC 0.2 °C
120 to 200 °C
order code
890-200
890-210
890-215
890-230
890-235
890-240
UKAS Certificate - temperature
instrument only standard 5-point
instrument & probe system 5-point
checker 3-point
test cap 1-point
simulator 5-point
data-logger 3-point
www.etiltd.com
£ each
56.00
56.00
44.00
16.00
56.00
56.00
temperature data-loggers
-50 to 100 °C
CMC 0.04 °C
thermistor & PT100 test caps
-18 to 100 °C
CMC 0.1 °C
thermocouple simulators
-200 to -50 °C
CMC 0.25 °C
-50 to 1372 °C CMC 0.15 °C
FREE UK delivery over £40
21
catering
thermometers
Mini RayTemp®
for routine day-to-day temperature checks
l compact, lightweight & easy to use
l laser dot alignment
The Mini RayTemp infrared thermometer has a
clear, easy to read, LCD display with low battery,
backlight indication and an auto-power off facility
that turns the instrument off after ten seconds,
maximising battery life. This infrared thermometer
is ideal for numerous temperature measurement
applications where contact with the item to be
measured is an issue.
The unit also incorporates laser assisted alignment
as standard, to assist in pin-pointing the area of
measurement. The unit incorporates a 12:1 optic
ratio (target distance/diameter ratio) and a fixed
emissivity of 0.95 making it suitable for a wide
range of catering and food processing applications.
order code
814-080
830-040
814-132
description
Mini RayTemp
protective nylon pouch
Comparator
£ each
22.00
5.00
32.00
°C/°F
AUTO
OFF
specification
range
resolution
accuracy - infrared
field of view
emissivity
battery & life
display
dimensions
weight
Mini RayTemp
-50 to 330 °C
0.1 °C/°F
±2 °C (0 to 330 °C) otherwise ±4 °C
whichever is greater
target ratio 12:1
0.95 fixed
9 volt PP3 - 80 hours continuous use
custom LCD
36 x 88 x 131 mm
143 grams
RayTemp® 2 IR Thermometer
high accuracy ±1 °C over a limited range
l FREE traceable certificate of calibration
NEW
l records the max/min temperatures
Designed and manufactured here in the UK, the
new RayTemp 2 infrared non-contact thermometer
is the latest addition to our range. Simply aim the
thermometer at the target and press the measure
button to display the surface temperature.
The unit features a large, easy to read LCD display
with low battery and an auto-power off facility
that turns the instrument off after 30 seconds,
maximising battery life.
Each RayTemp 2 is housed in a robust ABS case
that contains 'Biomaster' additive which reduces
bacterial growth. For those who are health
and safety conscious, the RayTemp 2 does not
incorporate laser alignment.
order code
228-020
830-227
814-132
22
description
RayTemp 2
protective silicone boot
Comparator
tel: 01903 202151
£ each
30.00
6.00
32.00
°C/°F
MAX
MIN
AUTO
OFF
specification
range
resolution
accuracy
RayTemp 2
-49.9 to 349.9 °C
0.1 °C & 1 °C
±1 °C (0 to 100 °C) otherwise ±2 °C
or ±2 % of reading whichever is greater
field of view
target ratio 5:1
emissivity
0.95 fixed
battery & life
3 x 1.5 volt AAA - 350 hours continuous
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
email: [email protected]
ideal for the foodservice industry
l ±1 °C accuracy over the critical food range
l 8 dot circular laser for precise targeting
The RayTemp 3 is ideal for measuring food
surface temperatures, eliminating the need to
touch or contaminate the food you are measuring,
avoiding the risk of cross-contamination.
Additionally the unit is suitable for measuring the
surface temperature of griddles and hotplates.
Simply aim and pull the trigger to display
the temperature of the item being measured.
In addition the LCD will display the maximum
temperature.
The RayTemp 3 incorporates a laser assisted
alignment as standard, backlight indication and an
auto-power off facility that turns the instrument off
after 15 seconds, maximising battery life.
order code
814-040
830-040
834-740
description
RayTemp 3
protective nylon pouch
ABS carrying case
£ each
50.00
5.00
13.50
°C/°F
AUTO
OFF
MAX
MIN
specification
range
resolution
accuracy - infrared
field of view
emissivity
battery
display
dimensions
weight
RayTemp 3
-60 to 500 °C
0.1 °C (-9.9 to 199.9 °C) or 1 °C
±1 °C (0 to 65 °C) otherwise ±2 °C
or ±2 % of reading whichever is greater
target ratio 12:1
0.97 fixed
2 x 1.5 volt AAA - 140 hours
custom LCD
40 x 66 x 155 mm
180 grams
Combo IR Thermometer
catering
thermometers
RayTemp® 3 IR Thermometer
with foldaway penetration probe
l two instruments in one - contact & non-contact
l lightweight, portable & easy to use
The Combo is a 'two instruments in one' compact
unit - a digital infrared non-contact thermometer
and a traditional probe thermometer that features
a foldaway penetration probe.
Simply aim the infrared thermometer at the target and
press the measurement button to display the
surface temperature. The default emissivity is 0.95
but can be changed from 0.01 to 1, if required.
Alternatively, to take liquid or semi-solid
product temperatures, use the Combo's
stainless steel penetration probe (Ø3.3
x 120 mm). The unit also features a
lock function for continuous temperature
measurement.
order code
814-065
830-110
830-001
description
Combo
protective wallet
zip pouch
www.etiltd.com
£ each
48.00
5.00
6.00
°C/°F
specification
range - infrared
range - probe
resolution
accuracy - infrared
accuracy - probe
field of view
emissivity
battery & life
display
dimensions
weight
LOCK
MAX
MIN
AUTO
OFF
Combo
-32.9 to 219.9 °C
-54.9 to 329.9 °C
0.1 °C/°F
±2 % of reading or ±2 °C whichever is greater
±1 % of reading or ±1 °C whichever is greater
target ratio 5:1
0.95 default - adjustable 0.01 to 1
3 volt CR2032 lithium coin cell - 40 hours
custom LCD
25 x 40 x 156 mm
75 grams
FREE UK delivery over £40
23
catering
thermometers
ThermaData® Logger
temperature recording thermometers
l waterproof housing offering IP66/67 protection
l temperature range -40 to 85 °C or 125 °C
l resolution 0.1 °C, high accuracy ±0.5 °C
l meets EN 12830, S & T, C & D, 1
The ThermaData logger Mk2 series consists of a comprehensive
range of portable data-loggers utilising the latest in electronic
technology. The ThermaData loggers are housed in waterproof,
ergonomic cases that are designed to meet IP66/67 protection.
The ThermaData logger Mk2 range offers the choice of either blind
data-loggers or data-loggers with an LCD display. Other options
include internal and external temperature sensors/probes. The
external probes can be either fixed or detachable via a waterproof
three-pin connector. The remote temperature probes are supplied
with either a one, two or three metre (where stated) PVC/PFA
(fixed) or PUR/PVC (detachable) lead.
Each logger incorporates a red and green LED, the flashing green
LED indicates that the logger is active/logging and the flashing
red LED indicates that your customised preset alarms have been
exceeded. For details of the range of loggers, see overleaf.
ThermaData Studio software
The ThermaData logger is connected to a PC via a USB cradle. By selecting the relevant icon the data can be
downloaded and displayed either as a graph, table or summary. The information can be analysed by zooming
in, saving as Studio File or exporting as a text (.txt) or Excel (.xls) file to other software packages.
The ThermaData Studio software incorporates several useful functions, including the ability to display two traces
on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The ThermaData Studio software will work equally with all
ThermaData loggers. The software is both powerful and
sophisticated, yet user-friendly enabling temperature data
to be organised and analysed to provide management
information. The software allows the user to programme
the logging sample/interval rate (0.1 to 255 minutes),
the real-time clock, °C or °F, delayed start (maximum
23 hours, 59 minutes and 59 seconds) or select a magnetic
start option. It is also possible to include a 32-character user
ID for each logger.
By selecting continuous logging in the software options, it is
possible to start the ThermaData logger only once and never
have to reset its parameters again, even if downloaded regularly.
Unlike most low cost loggers, the ThermaData logger will
continue recording during and after downloading the data.
°C/°F
24
MAX
MIN
IP66/
IP67
tel: 01903 202151
The ThermaData Studio software is supplied with each
USB cradle. Please note: when initially ordering loggers
it is necessary to order at least one ThermaData logger
cradle.
email: [email protected]
ThermaData logger - model TD
blind with an internal sensor
LCD with an internal sensor
lNTC
thermistor sensor
l
-40 to 85 °C
lrecords up to 4000
readings
order code description
295-001
model TB
£ each
50.00
ThermaData logger - model TBF
lNTC
thermistor sensor
l
-30 to 85 °C
lrecords up to 4000
readings
order code description
296-001
model TD
ThermaData logger - model TDF
blind logger with an external fixed sensor
LCD with an external fixed sensor
lNTC
thermistor sensor
x 100 mm probe,
1 metre PVC/PFA lead
l
-40 to 125 °C
lrecords up to 4000
readings
lNTC
thermistor sensor
lØ3.3 x 100 mm probe,
1 metre PVC/PFA lead
l
-40 to 125 °C
lrecords up to 4000
readings
lØ3.3
order code description
295-101
model TBF
£ each
67.00
ThermaData logger - model TD1C*
LCD with an internal & external sensor with connector
lNTC
thermistor sensors
lØ3.3 x 100 mm probe,
1 metre PUR/PVC lead
l-30 to 85 °C (internal)
l-40 to 125 °C (external)
lrecords up to 2 x 2000
readings
order code description
296-051
model TD1C
£ each
60.00
£ each
107.00
order code description
296-101
model TDF
£ each
77.00
USB cradle, software & start magnet
catering
thermometers
ThermaData logger - model TB
This logger cradle is
supplied complete with
ThermaData Studio
software and a start
magnet.
Each USB cradle is
supplied with a 1 metre
PVC lead.
order code description
293-804
cradle, software & start magnet
£ each
45.00
optional accessories
specification
range internal
range external
resolution
accuracy
memory
sample rate
battery
battery life
display - blind
display - LCD
dimensions
weight
all models
-30/-40 to 85 °C - model dependant
-40 to 125 °C - model dependant
0.1 °C
±0.5 °C (@ ambient -10 to 85 °C)
4000 or 2 x 2000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
approximately 18 months
2 LED's
10 mm LCD/2 LED's
Ø76 x 23 mm
71 to 113 grams - model dependant
Loggers are supplied with a
white seal as standard, however
coloured seals are available in
packs of seven colours: black,
blue, brown, green, red, white
and yellow. This allows for colourcoding in various applications.
An optional protective silicone
boot is also available.
order code description
830-270
protective silicone boot - white
296-990
coloured seals - pack of seven
£ each
5.00
10.00
* for alternative NTC thermistor temperature probes please contact our sales office or visit our website
www.etiltd.com
FREE UK delivery over £40
25
catering
thermometers
ThermaData® Logger
blind recording thermometers
l visual display shows if limits are exceeded
l customised high/low alarm facility
The ThermaData logger is designed to record the
temperature of the surrounding environment. Housed in
a water resistant polyethylene case that incorporates
two LED status indicators.
The ThermaData Studio software allows the user to
programme the logging sample/interval rate (1 to
255 minutes), the real-time clock, °C/°F, delayed start
(maximum 23 hours, 59 minutes) or push-button start and
a 12-character user ID. The software also incorporates
a password protected calibration adjustment feature that
allows the user to check the calibration of loggers and
make minor adjustments 0.5 °C (±3 °C).
Also available in a variety of coloured cases to help
prevent cross-contamination. For more information
contact our sales office or visit our website.
order code description
293-001
ThermaData logger - blue
293-104
software & USB lead
£ each
27.00
34.00
Push Button
allows a simple visual
inspection to show if alarm
limits have been exceeded.
°C/°F
specification
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
MAX
MIN
ThermaData logger
-40 to 85 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt ½ AA lithium
minimum 3 years
Ø55 x 25 mm
45 grams
Stainless Steel ThermaData® Loggers
blind recording thermometers
l integral USB interface for setup & download
l5 probe lengths available
These stainless steel data-loggers are ideal for food and
other applications where a high temperature data-logger is
required. The ThermaData logger is housed in a waterproof,
food grade 316 stainless steel case to protect the logger
from corrosion, impact and moisture (IP66/67).
The ThermaData Studio software allows the user to
programme the logging sample/interval rate. The software
also incorporates a password protected calibration adjustment
feature that allows the user to check the calibration of loggers
and make minor adjustments. Each logger is supplied with
a two metre USB lead and ThermaData Studio software.
specification
order code description
£ each
293-900
s/steel logger - without probe
95.00
110.00
293-930
s/steel logger - Ø3.3 x 50 mm probe
293-931
s/steel logger - Ø4.5 x 100 mm probe* 120.00
293-932
s/steel logger - Ø4.5 x 150 mm probe* 125.00
293-933
s/steel logger - Ø4.5 x 200 mm probe* 130.00
supplied with a two metre USB lead & ThermaData Studio
software. *Each logger features a Ø3.3 mm reduced tip
26
tel: 01903 202151
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
°C/°F
MAX
MIN
IP66/
IP67
Stainless Steel ThermaData logger
-20 to 105 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt 2/3 AA lithium
minimum 3 years
Ø22.5 x 129 mm (excluding probe)
170 grams - model dependant
email: [email protected]
catering
thermometers
Super-Fast Mini Thermometer
with max/min & hold function
l fast response probe, 5 - 6 second readings
l easy to use, pocket-sized thermometer
The Super-Fast Mini is a pocket-sized, water resistant
(IP65) thermometer that measures temperature over
the range of -39.9 to 149.9 °C with a 0.1 °C/°F
resolution, turning on when the probe cover is removed
allowing for swift, easy measurement.
The thermometer incorporates a fast response Ø2.5 x
73 mm stainless steel penetration probe with reduced
tip and features a max/min and hold function.
Each unit is powered by a CR2032 lithium coin cell
battery and supplied with a probe cover with integral
pocket clip.
reduced tip for fast response
order code description
810-279
Super-Fast Mini thermometer
£ each
16.00
°C/°F
HOLD
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
MAX
MIN
AUTO
OFF
IP65
Super-Fast Mini
-39.9 to 149.9 °C
0.1 °C/°F
±0.5 °C (-10 to 100 °C)
3 volt CR2032 - 5000 hours
8 mm LCD
Ø25 x 150 mm
20 grams
ThermoPop® Thermometer
with 360° rotating display
l fast response probe, 5 - 6 second readings
l backlit display & auto-power off function
The ThermoPop is a pocket-sized, waterproof (IP66)
thermometer which incorporates a fast response Ø3 x
114 mm stainless steel penetration probe with reduced tip.
The thermometer incorporates a unique 360° rotating
display. Simply push a button to rotate the display
in 90° increments, enabling the user to read the
temperature in any position ie. left hand, right hand,
vertical or horizontal.
The unit indicates temperature over the range of
-50 to 300 °C with a 1 °C/°F resolution. Available in
red, white or blue, each ThermoPop is supplied with
a probe cover with integral pocket clip.
order code
810-301
810-304
810-305
description
ThermoPop thermometer - white
ThermoPop thermometer - red
ThermoPop thermometer - blue
www.etiltd.com
£ each
16.00
16.00
16.00
backlit LCD
°C/°F
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
AUTO
OFF
IP66
ThermoPop
-50 to 300 °C
1 °C/°F
±1 °C (-20 to 120 °C)
3 volt CR2032 - 5000 hours
9 mm LCD
20 x 45 x 178 mm
30 grams
FREE UK delivery over £40
27
catering
thermometers
Multi-Function Thermometer
with max/min & alarm functions
l incorporates foldaway stand, pocket clip & probe cover
l displays both temperature & alarm set temperatures
The Multi-Function thermometer is compact and easy to
use and displays both the temperature and the alarm
set temperatures. Ideal for restaurants, bars and cafes
as an economical solution for temperature measurement
applications.
The thermometer features a display hold facility and a
max/min memory function together with an adjustable
audible high/low temperature alarm. Each unit is supplied
with a stainless steel, food penetration probe (Ø3.5 x
125 mm) with one metre PVC connecting lead, pocket clip
and probe cover.
°C/°F
order code
810-961
810-964
810-965
HOLD
MAX
MIN
AUTO
OFF
description
Multi-Function thermometer - white
Multi-Function thermometer - red
Multi-Function thermometer - blue
£ each
12.00
12.00
12.00
specification
range
resolution
accuracy
battery & life
sensor type
display
dimensions
weight
Multi-Function
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C (-19.9 to 149.9 °C)
1.5 volt AAA - 5000 hours
thermistor
custom LCD
32 x 86 x 116 mm
98 grams
EcoTemp® Thermometer
with max/min & hold functions
l detachable, stainless steel food penetration probe
l large, easy to read LCD display
The EcoTemp digital thermometer features a large, easy to
read, LCD display with display hold and max/min memory
functions. The instrument measures temperature over the
range of -49.9 to 199.9 °C with a 0.1 °C/°F resolution.
Both open circuit and low battery indication are displayed,
when applicable. This thermometer is ideal for monitoring
cooking and food holding temperatures as part of HACCP
and health and safety procedures.
Each EcoTemp thermometer is supplied with a detachable,
stainless steel food penetration probe (Ø3.5 x 125 mm) with
a 700 mm silicone connecting lead.
°C/°F
order code
810-950
810-951
830-215
28
HOLD
MAX
MIN
HACCP
4
COMPATIBLE
description
EcoTemp thermometer & probe
replacement penetration probe
protective silicone boot - white
tel: 01903 202151
£ each
22.00
8.50
6.50
specification
range
resolution
accuracy
battery & life
sensor type
display
dimensions
weight
EcoTemp
-49.9 to 199.9 °C
0.1 °C/°F
±1 °C (-49.9 to 149.9 °C)
2 x 1.5 volt AAA - 10000 hours
thermistor
custom 22 mm LCD
20 x 58 x 165 mm
115 grams
email: [email protected]
water resistant with folding probe
l includes CalCheck 0.0 °C function
l accuracy of ±0.5 °C or better
The Gourmet thermometer is ideal for monitoring
cooking, cooling and food holding temperatures as part
of HACCP and health and safety procedures. The unit
incorporates two push buttons, on/off and hold.
Each unit incorporates a stainless steel, food penetration
probe (Ø3.5 x 110 mm) that conveniently folds back
into the side of the instrument when not in use, rotating
through 180°, allowing the user to transport the instrument
safely. Available in six colours, the Gourmet is ideal for
different food types or preparation areas.
order code
810-730
810-732
810-733
810-734
810-735
810-736
830-110
830-001
description
Gourmet thermometer - white
Gourmet thermometer - yellow
Gourmet thermometer - green
Gourmet thermometer - red
Gourmet thermometer - blue
Gourmet thermometer - brown
protective wallet
zip pouch
£ each
18.00
18.00
18.00
18.00
18.00
18.00
5.00
6.00
DishTemp®
dishwasher thermometer
°C/°F
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
HOLD
AUTO
OFF
CAL
CHECK
IP65
Gourmet
-39.9 to 149.9 °C
0.1 °C/°F
±0.5 °C (-39.9 to 124.9 °C)
3 volt CR2032 lithium coin cell
3000 hours
thermistor
16 mm LCD
20 x 52 x 155 mm
83 grams
catering
thermometers
Gourmet Thermometer
NEW
l displays maximum temperature reached
l simulates plate surface temperature
The new DishTemp thermometer simulates a plate as
it’s cleaned and sanitised in a commercial dishwasher,
accurately recording the maximum surface temperature
at the touch of a single button. The DishTemp eliminates
the need for costly and inaccurate test strips and stem
thermometers that don’t stay in place and don’t record
temperature at the plate surface.
Built to survive daily use in professional kitchens, the
DishTemp thermometer indicates temperature over the
range of 0 to 90 °C with a resolution of 0.1 °C/°F and
an accuracy of ±0.5 °C.
Incorporating a durable water-tight seal, the DishTemp
is waterproof to IP66 and is supplied complete with a
traceable certificate of calibration.
order code description
810-280
DishTemp thermometer
www.etiltd.com
£ each
25.00
°C/°F
IP66
specification
DishTemp
range
0 to 90 °C
resolution
0.1 °C/°F
accuracy
±0.5 °C
battery
3 volt CR2032 lithium coin cell
battery life
5000 hours
display
custom LCD
dimensions
14 x Ø127 mm
weight
120 grams
FREE traceable certificate of calibration included
FREE UK delivery over £40
29
catering
thermometers
Pocket-sized Thermometers
economical & easy to use
pen-shaped thermometer
T-shaped thermometer
This pen-shaped thermometer measures temperature
over the range of -49.9 to 149.9 °C, features a
Ø3.5 x 120 mm stainless steel penetration probe and
incorporates a °C/°F switch and display hold feature.
Supplied with a probe cover that includes a pocket clip.
This handy-sized thermometer measures temperature
over the range of -49.9 to 149.9 °C, features a
Ø3.5 x 120 mm stainless steel penetration probe and
incorporates a °C/°F switch and display hold feature.
Supplied with a probe cover that includes a pocket clip.
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
pen-shaped
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C
1.5 volt LR44 - 5000 hours
6 mm LCD
17 x 20 x 190 mm
15 grams
order code description
810-260
pen-shaped thermometer
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
£ each
13.00
water resistant max/min thermometer
This handy pocket-sized, water resistant,
max/min thermometer features a Ø2.5 x
125 mm fast response reduced tip,
stainless steel food penetration probe.
The unit measures temperature over
the range of -49.9 to 199.9 °C with a
resolution of 0.1 °C/°F.
30
tel: 01903 202151
£ each
13.00
waterproof thermometer
Each unit is supplied with a FREE protective silicone
boot and protective probe cover that incorporates a
pocket clip and wall-mounting keyhole slot.
specification
range
resolution
accuracy
battery
display
dimensions
weight
water resistant
-49.9 to 199.9 °C
0.1 °C/°F
±0.5 °C (-9.9 to 99.9 °C)
3 volt CR2032 - 5000 hours
8.5 mm LCD
Ø41 x 17 x 175 mm
22 grams
order code description
810-270
water resistant thermometer
order code description
810-265
T-shaped thermometer
This waterproof thermometer incorporates a Ø2.5 x
122 mm stainless steel penetration probe. The
thermometer can also be placed inside a dishwasher
to ensure the maximum cycle temperature is correct.
The thermometer features three easy
to push buttons, max/min, °C/°F
and on/off. Each unit is supplied
with a probe cover that incorporates
a pocket clip.
specification
range
resolution
accuracy
battery
display
dimensions
weight
T-shaped
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C
1.5 volt LR44 - 5000 hours
6 mm LCD
20 x 58 x 145 mm
15 grams
£ each
13.00
waterproof
-49.9 to 199.9 °C
0.1 °C/°F
±0.5 °C (-9.9 to 99.9 °C)
3 volt CR2032 - 5000 hours
8 mm LCD
20 x 26 x 200 mm
25 grams
order code description
810-275
waterproof thermometer
830-275
replacement silicone boot
£ each
15.00
4.00
email: [email protected]
with internal sensor & external temperature probe
l programmable high/low audible alarm
l records the max/min temperatures
This max/min and alarm fridge or freezer thermometer
indicates temperature over the range of -49.9 to
69.9 °C with a resolution of 0.1 °C/°F and an
accuracy of ±1 °C.
The thermometer features a large LCD display,
max/min memory function to record the highest and lowest
temperatures and a high/low programmable audible
alarm. The unit incorporates two temperature sensors,
a remote water resistant probe with one metre PVC lead
for the appliance temperature and an internal sensor
for the room temperature.
The remote probe can be mounted onto the internal wall
of the fridge using the suction pad or mounting bracket
supplied. The thermometer is housed in a durable ABS
case and incorporates a foot-stand for shelf mounting.
order code description
810-225
digital fridge/freezer thermometer
£ each
6.75
remote probe
°C/°F
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
MAX
MIN
digital fridge/freezer
-49.9 to 69.9 °C
0.1 °C/°F
±1 °C
3 volt CR2032 lithium coin cell
3000 hours
custom LCD
16 x 50 x 82 mm
50 grams
Fridge or Freezer Thermometer
catering
thermometers
Fridge or Freezer Thermometer
with optional UKAS Certificate of Calibration
l programmable high/low audible alarm
l records the max/min temperatures
This fridge or freezer thermometer features a large LCD
display, max/min memory function to record the highest
and lowest temperatures and an audible alarm.
The unit incorporates two temperature sensors, a
remote water resistant probe with one metre PVC lead
for the appliance temperature and an internal sensor
for the room temperature. The remote probe can be
mounted onto the internal wall of the fridge using the
suction pad or mounting bracket supplied. The
thermometer is housed in a durable ABS case and
incorporates a foot-stand for shelf mounting.
For assured accuracy, the 891-210 fridge or freezer
thermometer is calibrated to UKAS standards and
supplied with a two-point UKAS Certificate of Calibration.
order code description
£ each
810-210
digital fridge/freezer thermometer
9.75
891-210
810-210 with UKAS Certificate*
49.75
*UKAS calibration applies to remote probe only
www.etiltd.com
remote probe
°C/°F
MAX
MIN
specification
digital fridge/freezer
range
-49.9 to 69.9 °C
resolution
0.1 °C/°F
accuracy
±1 °C
battery
1.5 volt AAA
battery life
5000 hours
display
custom LCD
dimensions
15 x 52 x 73 mm
weight
55 grams
891-210 includes a UKAS Certificate of Calibration
FREE UK delivery over £40
31
catering
thermometers
Fridge or Freezer Thermometers
spirit-filled or bi-metal dial
Ø52 mm dial thermometer
Ø70 mm dial thermometer
This easy to read fridge/freezer thermometer has a
Ø52 mm dial. The thermometer indicates temperature
over the range of -30 to 30 °C in 1 °C divisions.
This fridge/freezer thermometer has a Ø70 mm dial.
The thermometer indicates temperature over the range
of -30 to 30 °C in 1 °C divisions. The unit incorporates
colour-coded zones for ease of reading.
The unit incorporates colour-coded zones for ease of
reading. The fridge/freezer thermometer is housed in
an ABS case that incorporates a plastic hook to hang
from a shelf.
order code description
800-100
Ø52 mm dial thermometer
800-101
Ø52 mm dial - box of 20
£ each
1.80
30.00
FoodSafe Fridge Thermometer
The fridge/freezer thermometer is housed in an ABS
case measuring 60 x 70 mm. The thermometer can
be free-standing or hung from a shelf.
order code description
800-000
Ø70 mm dial thermometer
800-001
Ø70 mm dial - box of 10
£ each
2.85
24.00
Ø50 mm dial thermometer
This easy to read FoodSafe
fridge thermometer is
ideal for domestic or
commercial use, as
it is reliable, robust
and hygienic.
The unit indicates
temperature over
the range of -25
to 40 °C with an
accuracy of ±1 °C over
the range of -5 to 20 °C,
2 °C thereafter.
This stainless steel, fridge/freezer thermometer has a
Ø50 mm dial. The thermometer indicates temperature
over the range of -30 to 30 °C in 1 °C divisions.
Each FoodSafe measures Ø25 x
150 mm and is supplied with a stainless
steel hook for hanging.
order code description
803-900
FoodSafe thermometer
32
tel: 01903 202151
The colour-coded area indicates when the thermometer
is at the correct temperature for a fridge or freezer.
The housing measures 60 x 70 mm and can be
free-standing or hung from a shelf.
£ each
6.00
order code description
800-923
Ø50 mm dial thermometer
£ each
3.75
email: [email protected]
spirit-filled with colour-coded zones
clear spirit-filled thermometer
spirit-filled thermometers
This spirit-filled fridge/freezer thermometer is encased
in a clear ABS housing (20 x 30 x 122 mm).
The thermometer's colour-coded zones indicate
temperature over the range of -40 to 20 °C and
-40 to 80 °F with a 1 °C resolution.
These spirit-filled fridge/freezer thermometers
feature clearly marked colour-coded zones
for ease of reading.
The unit is designed to be hung from a shelf in a
fridge, freezer or cold cabinet, alternatively it could be
wall-mounted (brackets supplied). Each unit is sold
singly or in boxes of ten.
order code description
803-925
clear spirit-filled thermometer
803-930
clear spirit-filled - box of 10
£ each
2.00
18.00
The horizontal thermometer indicates temperature over
the range of -30 to 40 °C in 1 °C divisions. The ABS
housing measures 53 x 130 mm.
The vertical thermometer indicates temperature over the
range of -30 to 40 °C in 1 °C divisions. The ABS case
measures 24 x 150 mm.
order code description
803-000
vertical spirit-filled thermometer
803-050
horizontal spirit-filled thermometer
£ each
2.00
2.25
catering
thermometers
Fridge or Freezer Thermometers
Digital Fridge Thermometer
with food safety zone indicator
l energy saving battery feature
safety zone icon
l water resistant to IP65
This water resistant fridge thermometer incorporates a
large and clear digital display that indicates temperature
over the range of -9.9 to 49.9 °C with a 0.1 °C resolution.
The thermometer features a unique food safety zone
icon 'd' in the display that indicates when the temperature
is outside the range of 0 to 8 °C.
The fridge thermometer's energy saving feature turns
the unit off when deprived of light, maximising battery
life. The unit is powered by a single CR2032 battery
with a life expectancy of five years.
The unit is housed in an ABS case that measures 18 x 42
x 71 mm and can be free-standing or hung from a shelf.
order code description
810-241
digital fridge thermometer
www.etiltd.com
£ each
8.85
°C
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
IP65
digital fridge
-9.9 to 49.9 °C
0.1 °C
±1 °C
3 volt CR2032 lithium coin cell
10000 hours
custom LCD
18 x 42 x 71 mm
36 grams
FREE UK delivery over £40
33
catering
thermometers
Digital Timers
the essential tool for every kitchen
countdown/up timer
water resistant countdown timer
This countdown timer offers
water resistance to IP65
along with a large digital
display and audible alarm
with variable volume
control, allowing the user
to set up to a maximum
volume of 95 decibels.
This countdown/up timer incorporates a louder than
average 80 decibel audible alarm. The timer is fully
programmable, allowing the user to set the time up to
99 minutes and 59 seconds or 19 hours and 59 minutes.
The unit is powered by one AAA battery and is designed
to sit on a worktop or be attached to an appliance via
the magnetic pad at the rear of the instrument.
order code description
806-105
countdown/up timer
£ each
8.00
The keypad allows the
user to set times up to
99 hours, 99 minutes and
99 seconds. The timer
incorporates magnetic
pads and a keyhole slot
for wall-mounting or attaching to an appliance.
The unit measures 22 x 89 x 130 mm and is
powered by two AAA batteries.
order code description
806-150
water resistant countdown timer
TimeStick® one-handed timer
Extra
The TimeStick is a handy-sized, portable timer with
a water resistant numeric keypad. Simply hang it
around your neck, slip it in your pocket or mount on
a magnetic surface. The countdown bar graph gives
you a quick indicator of remaining time. When the
countdown alarm sounds, the count up timer starts to
show how much time has elapsed since setting the alarm.
The unit also features a 12 or 24 hour format and a
keypad lock to prevent accidental key entry. The unit is
powered by a CR2032 battery.
order code
806-181
806-182
806-183
806-184
806-185
34
description
TimeStick timer - white
TimeStick timer - yellow
TimeStick timer - green
TimeStick timer - red
TimeStick timer - blue
tel: 01903 202151
£ each
12.00
12.00
12.00
12.00
12.00
£ each
13.50
BIG & LOUD timer
The Extra Big & Loud timer features a rugged
water resistant housing and variable volume control,
allowing the user to set up to a maximum volume
of 110 decibels - ideal in busy professional kitchens.
When a countdown alarm sounds, the count up timer
starts so you will see how much time elapses after your
alarm. The memory keeps your last countdown setting.
The timer incorporates two magnetic pads and a
flip-out stand. The unit measures 28 x 90 x 130 mm
and is powered by a 9 volt PP3 battery.
order code description
806-160
extra big & loud timer
£ each
16.00
email: [email protected]
professional cooking thermometer & timer
l temperature reading in 5 seconds with mini needle probe
l includes backlight & calibration function
The ChefAlarm is a professional cooking thermometer
and timer which displays the countdown/up time,
current temperature and simultaneously displays both
the high/low alarms and max/min temperatures.
The timer is fully programmable, allowing the user to
set the countdown/up time to/from 99 hours and 59
minutes. The unit incorporates a large, easy to read
LCD display with user selectable backlight and a loud
audible alarm with adjustable volume to 92dB - ideal
for busy professional kitchens.
The ChefAlarm also includes a calibration function
allowing the user to fine-tune the accuracy of
the thermometer (±2.2 °C). The unit is housed in a
water resistant casing and is designed to either sit on
a worktop or attach to an appliance using the
magnetic pads at the rear of the instrument.
Available in three colours, each unit is supplied
in a zip wallet complete with a penetration probe
(810-071) and probe holder clip. See below for full
probe specification.
order code
810-041
810-044
810-045
description
ChefAlarm - white
ChefAlarm - red
ChefAlarm - blue
£ each
30.00
30.00
30.00
°C/°F
specification
range
resolution
accuracy
battery & life
alarm volume
sensor type
display
dimensions
weight
MAX
MIN
CAL
AUTO
OFF
CHECK
ChefAlarm
-50 to 300 °C
0.1 °C/°F
±1 °C (-20 to 120 °C)
2 x 1.5 volt AAA - 5000 hours
<92dB
thermistor
custom LCD
19 x 70 x 152 mm
175 grams
catering
thermometers
ChefAlarm®
ChefAlarm® Temperature Probes
NTC thermistor probes with 2.5 mm jack plug
penetration probe
Ø3 x 150 mm
mini needle probe
Ø1.6 x 90 mm
order code
£ each
This 'L' shaped penetration probe features a
fast response, stainless steel reduced tip, which is
moisture-resistant and ideal for continuous
monitoring in ovens or similar. Supplied with a
1.2 metre stainless steel braided lead. Probe
temperature range -50 to 300 °C.
810-071
10.00
This miniature, stainless steel needle probe
is moisture-resistant and ideal for Sous Vide
cooking. Supplied with a 1.2 metre silicone
lead. Response time in five seconds. Probe
temperature range -50 to 300 °C.
810-072
12.00
Please note: the above probes are suitable for use with the ChefAlarm and DOT thermometers only
www.etiltd.com
FREE UK delivery over £40
35
catering
thermometers
Oven Thermometers
easy to read bi-metal
Ø50 mm dial oven thermometer
Ø55 mm dial oven thermometer
This stainless steel oven thermometer features a clear
Ø50 mm dial with colour-coded zones. The green
marker indicates the minimum temperature that
commercial heated display units should be kept at.
The oven thermometer indicates temperature over the
range of 50 to 300 °C in 10 °C divisions. The case
measures 40 x 60 x 70 mm.
This stainless steel oven thermometer features a
clear Ø55 mm dial with colour-coded zones. The
green marker indicates the minimum temperature
that commercial hot food display units should
be kept at. The oven thermometer indicates temperature
over the range of 0 to 300 °C in 10 °C divisions. The
case measures 43 x 66 x 80 mm.
The unit can be free-standing or hung from a shelf and
should be positioned in the middle of the oven for the
most accurate temperature reading.
The thermometer can be free-standing or hung from
a shelf and should be positioned in the middle of the
oven for the most accurate temperature reading.
order code description
800-931
Ø50 mm dial oven thermometer
£ each
3.75
order code description
800-809
Ø55 mm dial oven thermometer
£ each
4.75
Digital Timer
oven & cooking thermometer
This combined clock, countdown timer and thermometer
displays both the actual and the alarm temperature over the
range of 0 to 300 °C and simultaneously the countdown or
the actual time.
The timer will count down or up from/to 23 hours, 59 minutes
and 59 seconds and the real time clock will display the time
in either a 12 or 24 hour format.
The unit features an audible high alarm that can be set from
the simple to use seven-button keypad. The alarm temperature
is continuously displayed. The unit is designed to sit on a
worktop or can be attached to an appliance via the magnetic
pads at the rear of the instrument.
The thermometer is supplied with a high temperature
probe and a one metre stainless steel braided lead.
The probe has an insertion length of 150 mm (Ø4mm)
incorporating a reduced diameter tip for faster response.
order code description
810-060
oven thermometer & timer
810-061
replacement probe
36
tel: 01903 202151
£ each
16.00
6.00
°C/°F
specification
range
resolution
accuracy
battery & life
sensor type
display
dimensions
weight
HOLD
oven thermometer & timer
0 to 300 °C
1 °C/°F
±1 °C (0 to 130 °C)
2 x 1.5 volt AAA - 5000 hours
thermistor
triple custom LCD
18 x 73 x 125 mm
128 grams
email: [email protected]
catering
thermometers
DOT Thermometer
NEW
Digital Oven Thermometer
l temperature reading in just 5 seconds
l supplied with penetration probe
The DOT is an easy to use cooking thermometer
that displays both the current temperature and
alarm set temperature. Simply set the desired
temperature using the buttons, insert the probe into
your food, the DOT will beep, and the display
will flash when the temperature is reached.
The DOT incorporates a large LCD display and loud
70dB audible alarm making it ideal for use in busy,
professional kitchens.
Housed in a durable, water resistant case, the DOT is
designed to either sit on a worktop using the fold out
stand, or attach to an appliance using the magnetic
pads at the rear of the instrument.
Each unit is supplied with a 114 mm penetration probe
(810-078) with a 1.2 metre stainless steel braided
lead. See below for full probe specification and
alternative probes.
order code description
810-031
DOT - digital oven thermometer
£ each
24.00
braided lead allows the probe to
remain in the food during cooking
°C/°F
specification
range
resolution
accuracy
battery & life
alarm volume
sensor type
display
dimensions
weight
IP65
Digital Oven Thermometer
-50 to 300 °C
1 °C/°F
±1 °C (-20 to 120 °C)
2 x 1.5 volt AAA - 5000 hours
70dB
thermistor
custom LCD
20 x Ø80 mm
95 grams
DOT Temperature Probes
NTC thermistor probes with 2.5 mm jack plug
penetration probe
Ø3 x 150 mm
penetration probe
Ø3.5 x 114 or 305 mm
NEW
oven probe & clip
grate clip "
"
Ø3.5 x 50 mm
This 'L' shaped penetration probe features a
fast response, stainless steel reduced tip, which
is moisture-resistant and ideal for continuous
monitoring in ovens or similar. Supplied with a
1.2 metre stainless steel braided lead. Probe
temperature range -50 to 300 °C.
This stainless steel, reduced tip penetration probe
is moisture-resistant and ideal for continuous
monitoring in ovens or similar. Supplied with a
1.2 metre stainless steel braided lead. Probe
temperature range -50 to 300 °C.
This new oven probe is ideal for monitoring
ambient air temperatures. Using the clip, simply
attach the probe to an oven rack or shelf.
Supplied with a 1.2 metre stainless steel braided
lead. Response time less than ten seconds. Probe
temperature range -50 to 300 °C.
order code
£ each
810-071
10.00
810-078
10.50
(114 mm)
810-075
12.50
(305 mm)
810-076
10.50
830-530
1.75
(spare clip)
Please note: the above probes are suitable for use with the DOT and ChefAlarm thermometers only
www.etiltd.com
FREE UK delivery over £40
37
catering
thermometers
Kitchen Thermometers
for meat, frying, preserves, milk & jam
meat dial thermometers
Ø50 mm frying thermometer
These bi-metal dial thermometers incorporate markers for
beef, lamb, pork and poultry for quick and easy reading.
The 800-804 meat thermometer features a
Ø45 mm dial with a Ø4 x 105 mm stainless steel,
pointed probe and indicates temperature over the
range of 0 to 120 °C in 1 °C divisions.
The 800-884 meat thermometer features a large
Ø60 mm dial with a Ø5 x 102 mm stainless steel,
pointed probe and indicates temperature over the
range of 20 to 100 °C in 2 °C divisions.
order code description
800-804
Ø45 mm meat dial thermometer
800-884
Ø60 mm meat dial thermometer
£ each
4.00
5.50
milk frothing dial thermometers
This frying thermometer incorporates a Ø50 mm dial
and a pointed, stainless steel Ø4 x 150 mm probe.
The frying thermometer indicates temperature over the
range of 0 to 300 °C in 10 °C divisions.
Simply insert the thermometer stem into the oil for the
most accurate temperature reading. The dial is clearly
marked for meat, poultry, fish and chips.
order code description
800-805
frying thermometer - 150 mm
£ each
5.00
cook's stainless steel
thermometer
The stainless steel thermometer
indicates temperature over the range
of 40 to 200 °C and 100 to 400 °F
in 2 °C/°F divisions.
NEW
These barista milk frothing thermometers incorporate
a °C/°F dial with colour-coded zones that make them
fast and simple to use. Available in three different sizes,
each thermometer is supplied with a stainless steel
jug mounting probe clip, calibration spanner and
protective probe cover. Now available is a pack of
three colour-coded milk dial thermometers.
order code
800-810
800-820
800-800
800-830
38
description
Ø25 x 130 mm milk dial
Ø45 x 130 mm milk dial
Ø45 x 175 mm milk dial
Ø45 x 175 mm milk dial - 3 pack
tel: 01903 202151
£ each
5.00
5.25
5.25
12.00
The thermometer's scale is clearly
marked for hard crack, soft crack,
hard ball, soft ball, thread, jam,
caramel, sterilising and deep fry.
The thermometer's stainless steel
casing incorporates a retaining clip
and measures 50 x 240 mm plus
a 65 mm plastic handle.
Simply insert the thermometer
into the liquid or food being
measured and read the
temperature.
order code description
800-806
cook's thermometer
£ each
9.00
email: [email protected]
catering accessories
temperature log book
sachets of micro-sized Probe Wipes
In commercial kitchens each fridge, freezer or cold
cabinet should have its own temperature log/record
book. The log book has a wipe clean cover and contains
six months' supply of easy to use record sheets.
These convenient, single sachet, white, anti-bacterial
thermometer Probe Wipes are safe, easy to use and
are effective against a wide range of bacteria including
listeria and salmonella.
Each log book allows the user to enter three readings
per day consisting of the temperature, time and initials
of the person responsible for recording the data.
Each micro-sized wipe measures 60 x 30 mm and is
designed for one-time use. These single sachet wipes
are sold in a box of 100 sachets.
order code description
831-100
A5 temperature log book
831-105
A5 log books - pack of 10
£ each
2.00
16.00
mini tubs of 70 QAC free Probe Wipes
order code description
836-220
box of 100 single Probe Wipes
£ each
4.50
catering
thermometers
Log Book & Anti-bacterial Wipes
tubs of 180 QAC free Probe Wipes
wall bracket
This mini tub is designed to fit into the user's pocket
and incorporates an easy to dispense flip-top lid. The
mini tub contains 70 blue QAC free, anti-bacterial
Probe Wipes.
Each tub contains 180 blue QAC free, anti-bacterial
Probe Wipes that measure 130 x 130 mm.
Each Probe Wipe measures 70 x 130 mm and is
supplied in cartons of ten tubs.
An optional wall bracket is available, enabling a single
tub of wipes to be conveniently positioned.
order code description
836-020
carton x 10 mini tubs
www.etiltd.com
£ each
20.00
The tubs are supplied in cartons of six tubs of 180
Probe Wipes.
order code description
836-050
carton x 6 tubs of Probe Wipes
832-305
s/steel wall bracket for single tub
£ each
17.25
8.00
FREE UK delivery over £40
39
In 2014 ETI proudly received for the second time in three years
the 'Queen's Award for Enterprise for International Trade'
ETI was crowned 'Exporter of the Year' at the 2015 Made in the South East Awards
ETI also won the award for 'Innovation' at the 2015 Adur & Worthing Business Awards
id
e rs
v
i
R
e H ou
U n it
se, Eastin
gC
los
S, D o m inio n Wa
e
y
distributed by:
Electronic Temperature Instruments Ltd
Easting Close, Worthing, West Sussex BN14 8HQ
tel: 01903 202151 · email: [email protected]
www.etiltd.com
issue 1 - 767-010/2016

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project