- Computers & electronics
- Audio & home theatre
- Remote controls
- Universal Remote Control
- UR4-DCT 4 in 1 Cable Remote Control
- Operating instructions
Universal Remote Control UR4-DCT Operating instructions
Add to my manuals2 Pages
Universal Remote Control UR4-DCT is a versatile device that allows you to control up to four devices, including your TV, VCR, DVD, and audio receiver, with just one remote. It features three-digit code programming, allowing you to easily set it up to work with your specific devices. The remote also has a system on/off button that can send out power commands for all four devices with a single press, as well as the ability to program channel and volume controls for each device.
advertisement
Operating Instructions
For 4 in 1
Cable Remote Control
UR4-DCT
Universal Remote Control, Inc.
www.universalremote.com
OEE-0050A Rev 09 (08/04/04)
1
Introduction
The remote control is designed to operate the Motorola DCT series and
CFT series set top boxes. You can also control the majority of TV, VCR/DVD and
AUDIO equipment on the market as shown below.
CABLE : Cable Converts
TV : Televisions
VCR : VCRs and DVD
AUX : Audio Receivers, DMX & DCR,
TIVO, etc.
2
Replacing Batteries
Before you program or operate the remote control, you must install two new AAA alkaline batteries.
STEP1 Remove the battery compartment cover on the back of your remote control.
STEP2 Check battery polarity carefully, and install the batteries as shown in the illustration below.
STEP3 Replace the battery compartment cover.
3
Button Functions
4
Operations
Default State :
Device Default: Motorola DCT series and CFT2200.
Channel Default: CABLE channel and number keys through the CABLE, with the option of controlling channel and number keys through the TV or VCR. Refer to section F for programming the channel and number keys through your TV or VCR.
Volume Default : CABLE volume and mute through the CABLE , with the option of controlling volume and mute through the TV or AUDIO.
Refer to section G for programming the volume and mute through your TV or AUDIO.
System On/Off button :
This button is designed to send out power commands for two, three or all four devices with one button press. Please refer to section E for details.
5
Programming the Remote Control
A. Three-Digit Code Programming
Method.
The remote control can be programmed by pressing in a three digit code number that corresponds to particular manufacturers and brands of Audio/Video equipment.
The three-digit code numbers are listed in the code table of the instruction manual.
STEP1 Turn on the equipment you wish to program. (TV, VCR, DVD or AUX).
STEP2 Press the [DEVICE] button (TV, VCR or AUX) to be programmed and the
[OK] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed.
*Tip : The device LED will stay lit for 20 seconds. The next step must be entered while the LED is on.
STEP3 Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables.
*Tip : The equipment will turn off when the correct three-digit code number has been entered. You can verify you have selected the correct code by pressing the [POWER] button, the equipment should turn on or turn off.
*Note : If there is more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.
STEP4 Store the three-digit code number by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.
*Note : Try all the functions on the remote control. If any of the functions do not work as they should, repeat from
Step 2 using the next three-digit code number from the same brand list.
B. Auto Search Method.
If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps:
STEP1 Turn on the equipment you wish to operate.
STEP2 Press the [DEVICE] button (TV, VCR or AUX) to be programmed and the
[OK] button simultaneously for 3 seconds. The device LED will turn on.
*Tip : The device LED will light on for 20 seconds. The next step must be entered while LED is on.
STEP3 Point the remote control toward the equipment and alternately press the
[CH+] (or [CH-]) button and the
[POWER] button. If the right code number is sent, the equipment will turn off.
*Tip : You can verify that you selected the correct code by pressing the
[POWER] button again. The equipment should either turn on or off.
STEP4 Press the same [DEVICE] button to store the code. The Device LED will blink twice to confirm that the code has been stored.
The device LED will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1 second interval of the LED being turned off.
Example : One blink, three blinks and eight blinks with an interval of 1 second of LED being turned off, indicates the code number 138.
*Note : Ten blinks is equal to the number 0.
D. Programming a second TV to AUX Mode.
STEP1 Press the [AUX] button to be programmed and the [OK] button simultaneously for 3 seconds.
*Tip : The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
STEP2 Press the [TV] button to pick up the
TV code table.
STEP3 Point the remote control toward the equipment and enter the three-digit code number assigned to your TV brand from the code tables.
STEP4 Store the three-digit code number by pressing the [AUX] button once again. The device LED will blink twice to confirm that the code has been stored.
C. To Find the Three Digit Code
Number That was Stored in the
Device.
STEP1 Press the [DEVICE] button (TV, VCR or
AUX) you wish to verify and the [OK] button simultaneously for 3 seconds.
*Tip : The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
STEP2 Press the [INFO] button.
E. Programming The System On/Off Button.
This is designed to program the System On/Off button so that it can send out up to four power on/off commands with one button press.
STEP1 Press the [CBL] button.
STEP2 Press the [SYSTEM] button and the
[OK] button simultaneously for 3 seconds. The [CBL] button will turn on for 20 seconds.
STEP3 Press the [DEVICE] button and the
[POWER] button you wish to store in the System On/Off button and repeat this until you stored all the power commands into the System
On/Off button.
STEP4 Press the [CH+] button to save the power commands you stored.
The [CBL] button will blink twice to confirm the saving.
F. Programming Channel Control.
By following the steps below, the user can program the channel controls (Channel Up,
Channel Down and Last) from one device to operate in another device mode. The default channel control settings on the remote control is as follows:
CBL : CBL
VCR : VCR
T V : CBL
AUX : AUX
If you wish to store the TV channel control in TV mode, use the following steps.
STEP1 Press the [TV] button and the [OK] button simultaneously for 3 seconds.
*Tip : The device LED will light on for 20 seconds. The next step must be entered while the LED is on.
STEP2 Press the [VOL -] button.
STEP3 Press the [TV] button.
The device LED will blink twice to confirm the programming.
To return to original state:
If you wish to restore the CABLE channel control in TV mode, repeat the above steps by pressing [CBL] in STEP3 .
G. Programming Volume Control .
By following the steps below, the user can program the volume controls (Volume Up,
Volume Down and Mute) from one device to operate in another device mode.
The default volume control settings on the remote control is as follows :
CBL : TV
VCR : TV
TV : TV
AUX : AUX lf you wish to store the TV volume control in CBL mode, use the following steps.
STEP1 Press the [CBL] button and the
[OK] button simultaneously for 3 seconds.
*Tip : The device LED will light on for 20 seconds. The next step must be entered while the LED is on.
STEP2 Press the [VOL +] button.
STEP3 Press the [TV] button.
The device LED will blink twice to confirm the programming.
To return to original state:
If you wish to restore the CABLE volume control in CBL mode, repeat the above steps by pressing [CBL] in STEP3 .
H. Programming For Advanced Function.
In the CABLE mode, the A, B and C buttons can be programmed to act as a macro or favorite channel button to send out up to 10 commands with one button press.
STEP1 Press the [CBL] button to select the
CABLE mode
STEP2 Press the [A (or B,C)] button and
[OK] button simultaneously for 3 seconds. The CBL device LED will turn on for 20 seconds.
STEP3 Press up to 10 buttons you wish to store. The CBL device LED will blink once for each command entered.
STEP4 Press the [CH+] button to store the functions that are selected. The
CBL device LED will blink twice to confirm the storage of functions.
I. LOW BATTERY WARNING.
When the battery is low and needs to be replaced with fresh batteries, the remote control LED will blink 2 times in sequence whenever a [POWER] button is pressed to turn on equipment.
J. Memory Lock System.
This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control.
K. Write your device Set-up codes.
TV Set-up Code Number :
VCR Set-up Code Number :
AUX Set-up Code Number :
6
Set-up Code Tables
CABLE TV
Remote
UR4-DCT
Converter
Motorola DCT Series, CFT2200
Code No
001
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
ADMIRAL
ADVENT
AIKO
AKAI
072 081 160 161 096
247
103
006 146 248
ALARON
AMARK
028
112 143
AMERICA ACTION 043
AMPRO
ANAM
AOC
073
043 054 055 056 080 112
058 006 004 112
APEX DIGITAL 015 226
AUDIOVOX 076 103 043
BAYSONIC 043
BELL&HOWELL 072
BRADFORD 043
BROKSONIC 096
CANDLE 006 002 003 004
CAPEHART 058
CARVER 164
CELEBRITY 001
CETRONIC 043
CINERAL
CITIZEN
103 120
006 002 003 004 101 103 143
CLASSIC 043
CONCERTO 004
CONTEC 043 051
CORONADO 143
CRAIG
CROSLEY
043 054 028
164
CROWN 043 143
CURTIS MATHES 006 004 101 143 011 072 081 120 164
CXC 043
DAEWOO 076 103 055 004 127 143 016 043 044 125 120
DAYTRON 004 143
DENON 011
DUMONT 004 073
DWIN 161
DYNASTY 043
DYNATECH 062
ELECTROBAND 001
ELECTROHOME 024 076 143
EMERSON 005 028 043 048 076 096 155 004 051 143 151 153
FISHER
154
007 057
FUJITSU 164 028 198 246
FUNAI 028 043 052 249
FUTURETECH 043
GATEWAY 242
GE 006 073 144 160 161 004 008 009 034 056 074 091
155 081 120
GIBRALTER 004 073
GOLDSTAR 004 106 119 110 112 113 127 143
GRUNPY 028 043
HALL MARK 004
HARLEY DAVIDSON 028
HARMAN KARDON 164
HARVARD 043
HITACHI 163 004 007 009 011 072 010 012 023 075 143 158
INFINITY 164
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
INKEL
INTEQ
JBL
JCB
129
073
164
001
JCPENNEY 004 006 008 024 030 065 101 143 156 160
JENSEN 013
038 001 034 083 206 JVC
KENWOOD 006 001
KLOSS
KTV
002 059
006 043 143 154
LG 004 106 119 110 112 113 127 143
LODGENET 072
LOEWE 207 164
LOGIK 072
LUXMAN 004
LXI 007 015 052 081 160 164
MAGNAVOX 006 003 004 022 059 060 061 063 064 127 164 094
160 028
MAJESTIC 072
MARANTZ 164 006
MATSUI 164
MATSUSHITA 080
MEGATRON 004
MEMOREX 004 007 072 028 096
METZ 088
024 006 004 042 MGA
MIDLAND 073
MINERVA 088
MINUTZ 008
MITSUBISHI 109 024 042 004 040 146 028 081 225
MOTOROLA 081
MTC 006 004 062 101
MULTITECH 043
NAD
NEC
NIKEI
NIKKO
NTC 103
ONKING 043
ONWA 043
OPTIMUS 080
015 025
006 134 040 056 007 019 024 237
043
103
OPTONICA 019 081
ORION 096 201 202 203 204 205 028
PANASONIC 034 056 080 164 208 222
PHILCO 006 003 004 024 056 059 060 063 064 127 143 164
PHILIPS 164 005 038 093 127 006 003 004 059 210
PIONEER 023 025 135 176 004 018 006 209 234
PORTLAND 004 143 103
PRISM 034
PROSCAN 144 160 161
PROTON 004 058 143 171 173 112
QUASAR 034 056
RADIO SHACK 004 019 127 143 043
RCA 160 161 144 156 065 006 004 023 024 056 074 152
081
REALISTIC 007 019
RUNCO 072 073
SAMPO 006 004 058 242
SAMSUNG 004 101 127 133 143 160 089 105 211 228 229
SANSEI 120
SANSUI 096
SANYO 007 053 057 082 020
SCOTCH
SCOTT
SEARS
SEMIVOX
SEMP
SHARP
004
004 005 028 043 048 143
004 007 015 028 030 057 082 094 143 160 052 164
043
015
081 014 019 028 004 022 143 175
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
SIGNATURE 072
SONY 001 126 139
SOUNDESIGN 003 004 028 043
SPECTRICON 112
SQUAREVIEW 052
SSS
STARLITE
004 043
043
SUPRE MACY 002
SUPREME 001
SYLVANIA 006 003 059 060 063 064 127 160 164 044 249
SYMPHONIC 052 249
TANDY
TATUNG
081
056 062
TECHNICS 034 080
TECHNOL ACE 028
TECHWOOD 004
TEKNIKA 002 003 004 024 028 043 072 101 143 103 164
TELERENT
TERA
TMK
TNCI
072
172
004
073
TOSHIBA 015 030 007 040 062 101
TOTEVISION 143
UNIVERSAL 008 009
VIDEO CONCEPTS 146
VIDIKRON 174 188 164
VIDTECH
WARDS
004
004 064 164 008 009 019 028 060 061 063 072 074
143
WESTING HOUSE 076
YAMAHA 004 006
YORK 004
YUPITERU 043
ZENITH
ZONDA
072 073 095 103 011 096
112
VCR & TV/VCR
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
ADMIRAL 025 053
AIKO
AIWA
117
034 161 101
AKAI 043 046 124 146
AMERICA ACTION 117
AMERICAN HIGH 031
AMPRO 072
ANAM
ASHA
031 103
040
AUDIO DYNAMICS 012 023 043
AUDIOVOX 101
BEAUMARK 040
BROKSONIC 035 037 129 025
CALIX
CANON
CCE
CINERAL
101
028 031
CAPEHART 108
CITIZEN
COLT
024 117
117
101 117
024
CRAIG 003 040 135 024 101
CUIRTIS MATHES 031 041
CYBERNEX 040
DAEWOO 005 108 111 117 017 065 007 010
DAYTRON 108
DBX 012 023 043
DYNATECH 034 053
ELECTROHOME 059 101
VCR & TV/VCR
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
ELECTROPHONIC 101
EMERSON 006 029 035 037 129 153 017 025 027 031 034 036
046 101 131 138 117
003 010 008 009 FISHER
FUJI
FUNAI
031
034
GARRARD 034
GE
GOLDSTAR
031 072 144 147 063 107 109 040 053
101 004 012
GO VIDEO 132 155 040 136
HARLEY DAVIDSON 034
HARMAN KARDON 012 045
HARWOOD 024
HITACHI
HQ
004 026 034 043 063 137 150
034
HUGHES 004
INSTANTREPLAY 031
JCL 031
JCPENNEY 004 012 031 040 101
JENSEN
JVC
043
048 043 055 060 130 150 152 012 031
KEC 101 117
KENWOOD 034 150 014 048
KLH
KODAK
LG
LLOYD
024
031 101
101 004 012
034
LOGIK
LXI
024
003 009 017 034 101 004
MAGIN 040
MAGNASONIC 117
MAGNAVOX 067 031 034 068 041 156 170
MARANTZ 067 069 012 031
MARTA 101
MATSUI 027 030
MATSUSHITA 031
MEI 031
MEMOREX 040 101 003 014 031 034 053 072 134 139 025
MGA 045 046 059
MGN TECHNOLOGY 040
MINOLTA
MITSUBISHI
004
059 061 051 004 046 045 053
MOTOROLA 031 053
MTC 034 040
MULTITECH 024 034
NEC
NIKKO
012 023 043 048
101
NOBLEX 040
NORDMENDE 043
OLYMPUS 031
OPTIMUS 053 101
OPTONICA 053 054
ORION 025
PANASONIC 031 070 133 140 163
PENTAX 004 031 063
031 034 067 025 PHILCO
PHILIPS 031 034 054 067 101 150
PILOT 101
PIONEER 021 004 048
PORTLAND 108
PROFITRONIC 040
PROTEC 024
PULSAR 072
QUARTZ 014
QUASAR 031 070 133 140 163 014
RADIO SHACK 123 034
RADIX
RANDEX
101
101
VCR & TV/VCR
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
RCA
REALISTIC
RICO
RUNCO
107 109 144 041 031 004 034 040 140 147 158 053
003 008 014 031 034 040 053 054 101 010
058
072
SALORA 014
SAMSUNG 040 017 107 109 113 115 124
SANKY 053
SANSUI 043 135 048 025 034
SANYO
SCOTT
SEARS
SHARP
SHINTOM 024
SHOGUN 040
SINGER
SONY
003 014 040 134
017 037 129 131
003 004 008 014 017 081 101 010 031 034
053 031 054 159
024
001 057 058 003 052 053 031 154 171 009 034
SOUNDESIGN 034
STS 004
SYLVANIA 031 034 059 067
SYMPHONIC 034
TANDY 034 010
TATUNG 043
TEAC 034 043
TECHNICS 031 070
TEKNIKA 031 034 101
THOMAS 034
TMK 006 040
TOSHIBA 017 131 004 008 059 082 150
TOTEVISION 040 101
UNITECH 040
VECTOR RESEARCH 012
VIDEO CONCEPTS 012 034 046
VIDEOSONIC 040
WARDS 003 004 017 024 031 034 040 053 054 131
WESTINGHOUSE 024 025
XR-1000
YAMAHA
ZENITH
024 031 034
012 034 043
072 034 001 058 080 101 153 048 025
*Note : For TV/VCR combination unit,
Please use following steps to operate the Volume control.
STEP1 Press the [CBL] button and the
[OK] button simultaneously for 3 seconds. The [CBL] button will light on for 20 seconds.
STEP2 Press the [VOL+] button.
STEP3 Press the [VCR] button. The LED will blink twice to confirm the programming.
DVD(VCR)
MAKER(BRAND) NAME
AIWA
ALPINE
202
221
APEX DIGITAL 251 246
ARCAM 215
CYBERHOME 220
DAEWOO 220
DENON
FUNAI
GE
226 241
208
230 231
CODE NUMBER (3 DIGIT) LIST
DVD(VCR)
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
GOLDSTAR 235 239
GO VIDEO 201
HARMAN KARDON 243
HITACHI
HITEKER
JVC
223
246
238
KENWODD 216
KLH
LG
210
235 239
MAGNAVOX 254 237
MARANTZ 253 242
MCINTOSH 217
MEMOREX 207
MITSUBISHI 227
MYRYAD 224
NAD 247 239
NAKAMICHI 225
ONKYO 240
OPTIMUS 229
PANASONIC 228 206 226
PHILIPS 253 237 214 242
PIONEER 255 222 229
PROCEED 245
PROSCAN 230 231
RCA 230 231
SAMSUNG 236 248 201
SANSUI 205
SANYO 204
SHARP
SONY
252
232 218 203
SYLVANIA 208
SYMPHONIC 208
TATUNG
TECHNICS
224
228
THETA DIGITAL 229
TOSHIBA 233 244 219 205
VENTURER 209
YAMAHA
ZENITH
249 226
239 226 235 239
AUDIO(AUX)
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
ADC 200
ADCOM 072 082 092 161
AIWA
AKAI
025 071 104 114 170 171 091 100
139 093
AMC 125 126 127 128
ANGSTROM 142
ARCAM 141
AUDIO ACCESS 147
AUDIO ALCHEMY 135
AUDIO FILE 203
AUDIO MATRIX 077
AUDIO TECHNICA 134
B & K
BOSE
096 097
070 170 113
BRYSTON 015
CARVER
CASIO
CHIRO
003 008 028 099 151 203 014 016 040 090
204
140
CINEMA SOUND 084 134
CITATION 148
CLARION 026
CURTIS MATHES 204
DENON 084 151 155 188 056 119
ENLIGHTENED AUDIO 049 050
AUDIO(AUX)
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
FISHER 151
FOSGATE AUDIONICS 062 148
GOLDSTAR 072 006
HARMAN KARDON 153 148 162 060 066 115
HITACHI
INKEL
020
005
JCPENNEY 102 204
JENSEN
JVC
058
013 163 176
KENWOOD 005 026 057 166 095
KOSS
KRELL
102
150
KYOCERA 200
LEXICON 120 167 171 172
LG 072 006
LUXMAN 035 137 139 165 004 029
LXI 204
MAGNAVOX 152 164 191 043
MARANTZ 028 048 063 191 090
MCINTOSH 173
MCS 204
MERIDIAN 009 051
MITSUBISHI 180
MONDIAL 022 023 042 073 075
NAD 048
NAKAMICHI 111 182 183 079 087
NEC
ONKYO
080
084 046 012 030 041 081 103 044
OPTIMUS 017 036 138 026
PANASONIC 007 088 129 130 132 195
PARASOUND 129 130 132
PHILIPS
PIONEER
063 188 189 191
084 039 045 054 069 078 168 128 158
PROCEED 144
QUASAR 007 088 129 130 132 195
RCA
REALISTIC
ROTEL
010 067 117 156
019 034 037 047
074 083 085
SAMSUNG 123
SANSUI
SANYO
SCOTT
SEARS
063 110 032 116
151
019
204
SHARP 026 057 094 175
SHERWOOD 024 038
SONY 001 011 055 187 053 112 018
SOUNDESIGN 036
SSI
TEAC
068
019 059 111 109
TECHNICS 076 088 122 193 080 098
THETA DIGITAL 065
TOSHIBA
YAMAHA
ZENITH
033 112
021 026 031 067 192 002 101 118
143 106
TIVO(AUX)
MAKER(BRAND) NAME
PHILIPS
SONY
252
253
CODE NUMBER (3 DIGIT) LIST
DMX & DCR (AUX)
MAKER(BRAND) NAME
DMX-DJ 254
MAESTRO II 255
CODE NUMBER (3 DIGIT) LIST
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project