CABLE MANAGEMENT and ENCLOSURES
CABLE MANAGEMENT
and ENCLOSURES
G2
G2
14 Lord’s
HillWiring
Road ••14Stonington,
CT 06378
• Tel: (860)
535-8326
• Fax:
(860) 535-8328
Hubbell
Premise
Lord’s Hill Road
• Stonington,
CT 06378
• Tel: (860)
535-8326
• Fax: (860) 535-8328
IFRAME NETWORK HARDWARE MANAGEMENT SYSTEM•HORIZONTAL CABLE MANAGEMENT•WALL MOUNT SWIN
QUAD CAB WALL MOUNT CABINET•MOBILE BASES•SOUND DAMPENING KIT•CONSOLIDATION POINT ENCLOS
HASP KIT•FILLER PANELS•NEXTFRAME LADDER RACK•POWER KIT•PREMISE NETWORKING CABINETS•TELESCOPIC
ROOF MOUNT FANS•CABINET LIGHT•THERMOSTAT•EQUIPMENT MOUNTING BRACKETS•FIBER OPTIC BRACKET
EQUIPMENT CABINET•GASKET KITS•WALL MOUNT HINGE BRACKETS•VERTICAL ORGANIZERS•CENTER RACK•TR
CONTENTSMOUNTING KIT•WALL ANGLE SUPPORT•PLASTIC RI
SUPPORT•HORIZONTAL HINGE•CROSS SPLICE KIT•CEILING
PANEL•VERTICAL CABLE MANAGEMENT•REAR WIRE FRAME•TRANSITION SPOOLS•VERTICAL RINGS•FRONT/REAR
CABLE MANAGEMENT PRODUCTS
PAGE
EQUIPMENT RACKS ......................................................................... G4
VERTICAL CABLE MANAGEMENT..................................................... G6
VERTICAL CABLE MANAGEMENT ACCESSORIES ............................. G10
WALL MOUNT SWING FRAME ....................................................... G11
HORIZONTAL CABLE MANAGEMENT .............................................. G12
HORIZONTAL CABLE MANAGEMENT ACCESSORIES ....................... G14
CABLE MANAGEMENT ACCESSORIES.............................................. G16
LADDER RACK.................................................................................. G18
WALL MOUNT HINGED BRACKETS ................................................ G20
GROUNDING SOLUTIONS
AND
CABLE GRIPS ............................... G21
ENCLOSURES
PAGE
DATA CENTER SOLUTIONS ............................................................. H2
IFRAME®
COLUMN SYSTEM ........................................................ H4
IFRAME®
ACCESSORIES ............................................................... H6
IFRAME®
SERVER CABINET .......................................................... H8
IFRAME®
VERTICAL PATCH PANEL .............................................. H9
IFRAME®
PREMISE NETWORKING CABINET ................................ H10
IFRAME®
CUSTOMER CONFIGURED CABINET ............................ H12
ENCLOSURE/RACK ACCESSORIES ................................................... H14
ZONE CABINET SOLUTIONS ........................................................... H18
QUADCAB® WALL MOUNT CABINETS ..................................... H20
RE-BOX® REMOTE EQUIPMENT CABINETS ................................. H22
ACCESSORIES
FOR
QUADCAB® AND RE-BOX® .................... H27
CONSOLIDATION POINT ENCLOSURE ............................................ H31
ZONE BOXES
FOR
SECURITY BOXES
VERTICAL
AND
ACCESS FLOOR
FOR
AND IN-CEILING ................... H32
WIRELESS ACCESS POINTS ......................... H33
HORIZONTAL POWER STRIPS ................................. H34
INTELLIGENT POWER STRIPS
WITH
MONITORING .......................... H36
METAL PLUGTRAK® ..................................................................... H38
ATO POWER STRIPS PROGRAM ..................................................... H39
www.hubbell-premise.com
www.hubbell-premise.com
Call 1-800-626-0005
Call 1-800-626-0005
G3
G3
CABLE MANAGEMENT
Equipment Racks
Hinged covers
Optional.
Sturdy, Durable
Steel construction.
Superior Cable Management
Multiple tie-off points to organize cable.
Snap in spools to route cable where needed.
Easy-to-Use
Screws with dog-nose tip lead in and #3
Phillips combo head provided.
Mates with most other models of racks and
channels.
Specifications
X Material:
Rack: 6063-T2 aluminum.
Uprights: 1/4” web thickness.
X Finish: Durable black powder coat or mill
Equipment Racks
finish.
X Weight capacity: 500 lbs. (static) when
properly secured to floor.
X UL Listed - 7N69 Communications Circuit
Accessory.
X EIA-310-D universal spacing tapped
#12-24 front and rear.
G4
Q Attractive Front Covers Enhance Appearance.
Q Channels Clip to Rack Greatly Speeding Assembly.
Q Spools can be Located as Needed Along Length
of Channel.
Q Channels Ship Knocked Down to Reduce Freight.
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
CABLE MANAGEMENT
19” Equipment Rack with 10" and 15" Wide XXL Channels
Seven-foot cable management rack with XXL vertical cable management organizers in a single,
easy to order catalog number. Use in C6A applications or other applications with 400 cables or
better. Rack ships unassembled.
Delivery:
1
Rack, 7'H (HPW84RR19)
2
XXL Vertical Organizers (see page G6)
Rack Height
Rack Units
Channel Width
Finish
Catalog No.
7’ (2134)
45
10" (254)
Black
7’ (2134)
45
15" (381)
Black
XSR1010
XSR1510
19” Equipment Rack with 6” wide ‘Z’ Channels
Seven-foot cable management rack with 6” wide vertical cable management organizers in a single
catalog number for ease in ordering. Use in typical applications. Products are available in both
black and clear aluminum finishes. Rack ships unassembled.
Delivery:
1 Rack, 7'H (HPW84RR19)
2 Vertical Organizers (ref. VS76/VS76A - see page G9)
Rack Height
Rack Units
Finish
Cover Style
Catalog No.
7’ (2134)
45
Black
Hinged
7’ (2134)
45
Black
Clip on
7’ (2134)
45
Aluminum
Clip on
CS1976H
CS1976
CS1976A
CS1976A
19” Equipment Rack with 3.25” wide ‘C’ Channels
Seven-foot cable management rack with 3.25” wide vertical cable management organizers in a
single catalog number for ease in ordering. Use when space is limited. Products are available in
both black and aluminum finishes. Rack ships unassembled.
Delivery:
1 Rack, 7'H (HPW84RR19)
2 Vertical organizers (VS73/VS73A - see page G9)
4 Covers (ref. VCC3/VCC3A - see page G9)
Rack Height
Rack Units
Finish
Cover Style
Catalog No.
7’ (2134)
45
Black
Hinged
7’ (2134)
45
Black
Clip on
7’ (2134)
45
Aluminum
Clip on
CS1973H
CS1973
CS1973A
CS1973A
Equipment Rack
Shipped unassembled.
Delivery: 2 Floor angles
2
Top angles
www.hubbell-premise.com
HPW84RR19
Call 1-800-626-0005
Equipment Racks
2 Vertical uprights
20 #12-24 x ⁵₈" equipment mounting screws
1 Assembly hardware kit
Rack Height
Rack Units
Mounting Width
Finish*
Catalog No.
HPW48RR19
48” (1219)
24
19” (483)
Black
48” (1219)
24
23” (584)
Black
HPW48RR23
68.5” (1676)
36
19” (483)
Black
HPW66RR19
84” (2134)
45
19” (483)
Black
HPW84RR19
84” (2134)
45
23” (584)
Black
HPW84RR23
89.7” (2286)
48
19” (483)
Black
HPW90RR19
89.7” (2286)
48
23” (584)
Black
HPW90RR23
96” (2438)
51
19” (483)
Black
HPW96RR19
96” (2438)
51
23” (584)
Black
HPW96RR23
* For mill finish rack, add “ML” to catalog number.
HPW84RR19ML
G5
CABLE MANAGEMENT
XXL Vertical Cable Management
Open Design
• Allows side-to-side airflow.
• "Eco-Friendly" design minimizes weight and
steel content.
• Maximum cable capacity with unobstructed
access to cable.
Power Strip Mounting
• All the way to the back where it is needed.
Snap in Spools
• Place where you need them along the
upright for refined cable management.
Cover
• Hinges both left and right.
• Panel easily replaced for personalized
data center appearance.
Rear Organizer
• Large area to lace horizontal cable.
• Horizontal Cable on left and right sides
Specifications
X Cable capacity: See table opposite page.
Vertical Organizers
X Finish: Durable black powder coat.
X Construction:
Steel wire frame chassis;
Cold Rolled Steel mounting rails;
Extruded Aluminum door frame with
laminate insert.
Q Extra Large Capacity, Open Design Supports
Large C6A Bundles.
Q Customize Front Door Panel - Unmatched Options
to Personalize Data Center Appearance.
Q Pre-Assembled - Ready to Use Out of the Box.
Q Open Design Maximizes Airflow, Cable Capacity
and Accessibility.
Q "Eco-Friendly" Design Minimizes Weight and
Steel Content.
G6
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
CABLE MANAGEMENT
XXL Series Vertical Organizers
Delivery:
1 Dual hinging door
1 Front organizer
1 Rear organizer
12 Snap in spools
1 Installation hardware kit
Color: Black powder coat with metallic insert.
Mounts to 7" Rack.
Channel Width:
6"W
10" W
Depth
Catalog No.
Catalog No.
10"
13"
XS0610
XS0615
15"W
Catalog No.
XS1010
XS1515
XS1510
XS1515
Cable Capacity Chart
0.25" Diameter
Catalog No.
0.29" Diameter
0.34" Diameter
Front
Rear
Front
Rear
Front
Rear
XS0610
753
538
560
400
407
291
XS0615
1069
538
794
400
578
291
XS1010
1303
1398
968
1039
704
756
XS1015
1881
1398
1398
1039
1017
756
XS1510
1987
2474
1477
1838
1074
1337
XS1515
2945
2474
2189
1838
1592
1337
Contact Customer Service for custom colors.
Rear
Front
25.51
50.28
20.25
The XXL design has a unique door construction with a replaceable center
panel. Now the look of the equipment in your data center can be easily
customized to reflect the unique style of your enterprise.
www.hubbell-premise.com
2 - XS1510 Organizers mounted to each side of an HPW84RR19
Equipment Rack.
Call 1-800-626-0005
G7
Vertical Organizers
Top View
CABLE MANAGEMENT
Vertical Cable
Management
Rugged Construction
14 ga. Z-Frame withstands abuse.
Cable Management Spools
• Ensure proper bend radius.
• Place where needed along channel
for refined cable management.
Cable Management
Organize cable by groups and bundles.
Front Covers Conceal Cable
Easily snap in place.
Optional Hinged Covers
Swings both left and right hand.
“Z” Channel
Vertical Organizer.
“C” Channel Vertical
Organizer.
Specifications
Q Cable Management Spools can be Located Along
X Channel Material:
Vertical Organizers
• "Z" Frame: 14 ga. Cold Rolled Steel.
• "C" Channel: 16 ga. Cold Rolled Steel.
X Cover material: 16 ga. Cold Rolled Steel.
X Finish: Durable black or Aluminum color
powder coat finish.
X Packaged to meet Telcordia GR-63-CORE
transportation requirements.
X U.S. Patent No. 6,347,714.
the Length of the Channel for Proper Cable Routing.
Q Assembles Quickly - Channels Clip to Equipment
Rack.
Q Pass-Thru Holes Permit Cable Routing From the Front
to the Rear of the Rack When Required.
Q Channel Assembly Shipped Knocked-Down to
Conserve Freight Expense.
G8
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
Delivery: 2 Z channels, 38.5”H x 12.5”D
2 38.5” Covers
4 Hinges
Color
Rack Height
Catalog No. 6"W
Black
7’ (2134)
CABLE MANAGEMENT
Vertical Organizers with Hinged Covers
4 Gates
24 Spools
4 ½”-13x1” Bolt w/nut and lock washer
Catalog No. 4½"W
Catalog No. 3¼"W
VS76H
VS74H
VS73H
Vertical Organizers
Z’ Channel, 6” with Cover
For 7’ or 8’ rack. Suitable for approximately
Delivery: VS76(A)
2 Z channels, 38.5"H x 6"W x 10.5"D
2 Covers, 38.5”W x 6”W
4 Gates
24 Spools
4 Bolts, nuts, washers ½" - 13 x 1"
Rack Height
7’ (2134) or 7.5’ (2286)
8’ (2438)
800 4-pair 0.25" Dia. UTP cables when fully utilized.*
Delivery: VS86(A)
1 Z channels, lower, 45.38”H x 6”W x 10.5"D
1 Z channel, upper, 38.5”H x 6”W
1 Cover, lower, 45.38”H x 6”W
1 Cover, upper, 38.5”H x 6”W
4 Gates
24 Spools
4 Bolts, nuts, washers ½" - 13 x 1"
Catalog No. Black
Catalog No. Aluminum
VS76
VS86
VS76A
VS86A
VS76H
‘Z’ Channel, 6” (for short racks)
Delivery:
1 Z channel, 38.5”H x 6”W x 10.5"D
16 Spools
2 Bolts, nut, washer ½" - 13 x 1"
Rack Height
Catalog No. Black
4’ (1219) and 5.5’ (1676)
VS46
Catalog No. Aluminum
VS46A
‘Z’ Channel, 4½” wide, 0.25" Dia.
Suitable for approximately 540 4-pair UTP cables when fully utilized.*
Delivery:
2 Z channels
38.50” x 4.5" x 10.5”
24 Spools
4 Bolts, nuts, washers ½" - 13 x 1"
Rack Height
Catalog No. Black
7’ (2134)
VS74
‘C’ Channel, 3¼” wide
Suitable for approximately 300 4-pair UTP cables.
Delivery: VS73(A)
2 C channels, 38.5"H x 3.25”W x 10.5”D**
24 Spools
4 Bolt, nut, washer ½” - 13 x 1”
Rack Height
Catalog No. Black
7’ (2134)
VS73
* Capacity of front and rear of channel combined.
** When optional rear gates are used.
Catalog No. Aluminum
VS73A
VS46
VS73
Cable Management Spools
Assembles as needed along each column to further route and conceal cable.
Q
Q
Q
Snap locks into column.
Use every 1U to achieve duct style
manager.
Locate as needed to route cable to put
wherever needed.
Specifications
X Material: Polycarbonate (ABS).
X Finish: Black.
X Maintains T568-A compliant bend radius
as cable transitions from horizontal to
vertical.
Description
Catalog No.
Package of 50 black spools - 3"
ICKSS
ICKSS9
Package of 50 black spools - 9"
www.hubbell-premise.com
Vertical Organizers
Features/Benefits
Call 1-800-626-0005
G9
CABLE MANAGEMENT
Vertical Cable Management Accessories
Covers
Features/Benefits
Q
Q
Delivery: 1 Cover
38.5”H
Cover
Black
Width
Catalog No.
6”
VSC6
4”
VSC4
3”
VSC3
VSC6
Specifications
X Material: 20 ga. Cold Rolled Steel.
Conceal cable to provide clean
appearance.
Snap in place - no fasteners to wear
or break.
X Finish: Durable black or aluminum
color powder coat finish.
38.5”H
Aluminum
Catalog No.
45.38”H
Black
Catalog No.
45.38”H
Aluminum
Catalog No.
VSC6A
VSC6L
VSC4L
VSC3L
VSC6AL
VSC4AL
VSC3AL
-
VSC3A
Fiber Spools
Features/Benefits
Q
Q
Q
Specifications
X Material: ABS, Black.
Used to take up fiber jumper slack in
vertical channels.
6” wide "Z" frame only.
Fastens to channel pass-thru holes.
Delivery: 5 sets of fiber spools
Catalog. No.
VCF610
Hinge Kit
Use to easily convert VS76 to VS76H.
Features/Benefits
Specifications
Q
X Material: 14 ga. Cold Rolled Steel
Allows cover to be hinged left and right
during moves, adds and changes.
Delivery: 2 hinges and fasteners.
Catalog. No.
VCKH
NOTE: Gates not provided, order separately.
Joining Kit
Use to easily convert VS76 to VS76H.
Features/Benefits
Specifications
Q
X Finish: durable black powder coat.
Q
Join top and bottom channel sections
when mounting to other than Hubbell
racks.
Join racks and cabinets side-to-side.
Delivery: 1 joining plate, 4 #12-24 x ⁵₈" screws, nuts, washers, 4 ½”-13 bolts, nuts, washers
Vertical Accessories
Catalog. No.
VCJK
Vertical Rings
Features/Benefits
Specifications
Q
X Width: 6” (152); depth: 10” (254).
X Material: 11 ga. Cold Rolled Steel.
X Finish: Durable, black powder coat.
Attaches to front or rear 19" mounting
holes on equipment racks.
Delivery: 2 vertical rings and 1 mounting kit
Brackets
One side
MCCVMR2
G10
MCCVMR22
Catalog No.
MCCVMR2
Between racks
MCCVMR22
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
Q Supports heavy or deep equipment in
locations with limited floor space.
Q Quick release latches - rack frame
hinges both left and right.
Q Cable tie slots along both sides and
inside top and bottom.
Q Ships knocked-down to conserve
freight expense.
CABLE MANAGEMENT
Wall Mount
Swing Frame
Specifications
X Material: 16 ga. Braces; 12 ga.
equipment frame.
X Finish: durable black powder coat.
X 70 lbs. load capacity.
X 16” on center mounting for easy
attachment to standard wall studs.
X 3” deep rack uprights.
X EIA-310-D universal spacing tapped
#12-24 front and back.
Wall Mount Swing Frame
Hubbell's wall mount swing frames are used to conserve floor space when a full-height floor
standing rack is not required. Wall mount frames are designed to hold heavy equipment in
controlled rooms where open access to equipment is acceptable.
Delivery: 1 rack frame
1 kit mounting hardware (50 - 12/24 screws)
Height
Rack Units
Width
Depth
Finish
Catalog No.
24” (610)
12
20.7” (526)
18” (457)
Black
HPWWMR24
36” (914)
19
20.7” (526)
18” (457)
Black
HPWWMR36
48” (1219)
26
20.7" (526)
18" (457)
Black
HPWWMR48
Wall Mount Swing Frame
www.hubbell-premise.com
Call 1-800-626-0005
G11
CABLE MANAGEMENT
Horizontal Cable
Management
Generous Space Between Rings
alleviates congestion.
Category 6A
Jumbo 3"x6" deep organizer
perfect for high-density
Cat 6A installations.
Rugged
Steel rod rings.
Pass-Thru Holes
with rolled edges.
Cable Friendly
Round rings.
Horizontal Cable Management
Locks in Place
When completely open to prevent cover
from being removed or lost.
Specifications
X Panel material: 16 ga. Cold Rolled Steel.
Q
All Steel Construction - Rugged, Non-Flammable,
no Fasteners to Wear or Break, no Fingers to
Fuss with.
Q
Components Snap Together Quickly Without
the Use of Tools.
Q
Modular Components Easily Configured in
Field to Adapt to Demanding Applications.
X Cover material: 16 ga. Cold Rolled Steel.
X Ring: 0.225” diameter Steel rod.
X Durable, black powder coat.
X GR-63-CORE transportation requirements.
X U.S. Patent No. 6,215,069.
Q "Green" Design Minimizes Weight and Steel Content.
G12
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
7-rings.
6 pass-through holes.
Hinged front cover.
Conceals patch cords and enhances the network appearance.
Q
Q
Q
Q
Panel
Front
Rear
Rack Width Rack Units
Height
Ring Depth
Ring Depth
19”
1U
1.75”
1.75”
19”
1U
1.75”
3.50”
19”
1U
1.75”
3.50”
6.00”
19”
1U
1.75”
6.00”
19”
2U
3.50”
1.75”
19”
2U
3.50”
3.50”
19”
2U
3.50”
3.50”
6.00”
19”
2U
3.50”
3.50”
6.00”
19”
2U
3.50”
6.00”
19”
2U
3.50”
3.50”
4.6”
19”
2U
3.50”
3.50”
4.6”
19”
3U
5.25”
3.50”
19”
3U
5.25”
6.00”
1 Heavy-duty version - no pass-through holes.
2 Includes rear wire frame.
3 Includes rear wire frame and rear cover - no pass-through holes.
4 Includes rear wire frame, cover and pass-thru holes.
Catalog No.
HC119CE1N
HC119CE3H1
HC119GC363
HC119CE6H1
HC219CE1N
HC219CE3N
HC219GC363
HC219GC36P3
HC219CE6N
HC219CR3N2
HC219CC3N4
HC319CE3N
HC319CE6N
HC219CC3N
- front and rear
cover shown
HC219CE3N
- front cover only
CABLE MANAGEMENT
Duct Panels
Features/Benefits
Enhanced Panels
Features/Benefits
Q
Q
Q
7-rings.
6 pass-through holes.
These panels can be upgraded through the use of accessories.
Rack
Width
19”
19”
19”
19”
19”
19”
Rack
Units
1U
1U
2U
2U
3U
3U
Panel
Height
1.75”
1.75”
3.50”
3.50”
5.25”
5.25”
Front
Ring Depth
3.50”
6.00”
3.50”
6.00”
3.50”
6.00”
Rear
Rings
No
No
No
No
No
No
Catalog No.
HC219ME3N
HC119ME3N
HC119ME6N
HC219ME3N
HC219ME6N
HC319ME3N
HC319ME6N
Basic Panels
Q
Q
Q
HC219MS1N
4-rings.
Solid panel.
Use when accessories or pass-thru holes are not required.
Rack
Width
19”
19”
19”
19”
23”
Rack
Units
1U
1U
2U
2U
2U
Panel
Height
1.75”
1.75”
3.50”
3.50”
3.50”
Front
Ring Depth
1.75”
3.50”
1.75”
3.50”
1.75”
Rear
Rings
No
No
No
No
No
Catalog No.
HC119MS1N
HC119MS3N
HC219MS1N
HC219MS3N
HC223MS1N
Cable Manager with Wire Saddles
Delivery: 1 - Panel assembly with cover(s), 4 - #12-24 x ⁵₈" dog-nosed screws, 4 - #12 nylon
flat washers
Rack Units
Height
Ring Depth
Catalog No.
2U
3.50”
3"
HC219ME3S
1U
1.75”
3"
HC119ME3S1
1 HC119ME3S includes only wire saddles and rings for vertical cable management.
www.hubbell-premise.com
Call 1-800-626-0005
HC219ME3S
G13
Horizontal Cable Management
Features/Benefits
CABLE MANAGEMENT
Horizontal Cable Management Accessories
Front/Rear Cover
Features/Benefits
Specifications
Q
X Material: 16 ga. Cold Rolled Steel.
Q
HC219C
Q
Q
Conceals patch cords.
Locks in place when completely open to
prevent cover from being removed or
lost.
Snaps open and closed, no fasteners
to lose or break.
Easily removed and replaced during
moves, adds and changes.
X Durable, black powder coat.
The hinged cover can be used on the front and/or rear of the Enhanced-style NEXTFRAME®
horizontal cable management system.
Delivery: 1 cover
Height
1U/1.75”
Catalog No.
HC119C
2U/3.50”
3U/5.25”
HC219C
HC319C
Vertical Management Rings
Features/Benefits
Specifications
Q
X Material: Steel.
Mounts to front of 2U and 3U panels
or can be mounted directly to rack
mounting rails - front or rear.
X Finish: black powder coat.
The vertical management rings attach to 19” tapped holes on the rack rails or uprights of cabinets
to provide vertical cable management.
HC23VR2
Delivery: 2 rings, 1 kit mounting hardware
Depth
3.50” (89)
6” (152)
Catalog No.
HC23VR2
HC26VR2
Horizontal Cable Management Accessories
Rear Wire Frame
Features/Benefits
Specifications
Q
X Material: 0.225” dia. Steel rod, 3½”
Q
HC33WF
Q
Rugged, non-flammable, won’t wear or
break like plastic.
Easy access, allowing patch cords to
connect at rear of hubs.
Round rod design prevents cable
from chafing.
high rings.
X Finish: durable, black powder coat.
Mounts to 2U and 3U panels only. Our unique design allows the frame to clip on to the rear of
Enhanced or Duct Style panels without the use of tools.
Delivery: 1 rear wire frame.
Depth
4.6” (117)
Catalog No.
HC33WF
6” (152)
HC36WF
Plastic Cable Management Rings
Features/Benefits
Specifications
Q
X Material: Polycarbonate, black.
Adhesive or non-adhesive versions.
X Height: 3.95”; Width: 2.95”
Use for patch cord cable management.
MCCPSR4
G14
Delivery: 4 rings.
Description
Catalog No.
Non-adhesive
Adhesive
MCCPSR4
MCCPSRA4
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
Plastic Finger Duct Organizer
Features/Benefits
Specifications
Q
Lightweight.
X Material: extruded PVC (organizers and
Q
Conceals cable stored in duct.
Q
Individual patch cord management.
cover).
X Metal panel: 16 ga. Cold Rolled Steel.
X Color: Black.
HC219CE3P
Plastic duct-style horizontal cable organizers are the traditional solution for storing and routing
jumpers and patch cords on a 19” equipment rack. The slots in the finger duct accommodate
precise routing of patch cords.
Delivery: 1 - Panel assembly with cover(s), 4 - #12-24 x ⁵₈" dog-nosed screws, 4 - #12 nylon flat
washers
Rack Units
Height
Front Duct Depth
Rear Duct Depth
Catalog No.
2U
3.50”
3"
5"
HC219CC3P
2U
3.50”
3"
None
HC219CE3P
1U
1.75”
3"
5"
HC119CC3P
1U
1.75”
3"
None
HC119CE3P
CABLE MANAGEMENT
Horizontal Cable Management Accessories
Transition Spool
Features/Benefits
Specifications
Q
Rugged, won't wear or break.
X Material: ABS, black.
Q
Use on all Hubbell racks, wall mount
or full size enclosures.
X Maintains T568 compliant bend radius
Q
Manages cable into vertical
organizer.
as cable transitions from horizontal to
vertical.
The Transition Spool is used to organize cable into the vertical organizer. For use with relay racks
with #12-24 uprights.
HCSPL310
Delivery: 10 spools, 10 HPW screws #12-24
Depth
1.75”
3.50”
Catalog No.
HCSPL110
6.00”
HCSPL310
HCSPL610
Specifications
Q
Brackets occupy 2 rack units.
X Material: Steel.
Q
For use with patch panels and cable
management panels.
X Finish: durable, black powder coat.
Horizontal Cable Management Accessories
Extender Brackets, 23”
Features/Benefits
The Extender Bracket is used to modify a 19" panel to mount onto a 23" rack.
Delivery: 2 brackets, 1 kit of mounting hardware.
BREXTB235
Catalog. No.
www.hubbell-premise.com
Call 1-800-626-0005
G15
CABLE MANAGEMENT
Cable Management Accessories
VELCRO® Brand ONE-WRAP® Cable Ties
VELCRO® Brand ONE-WRAP® Cable Ties
Features/Benefits
Q
Specifications
For use in the Hubbell NEXTFRAME®
Cable Management system.
X Straps per puck: 10.
X Maximum bundle diameter: 2.5”.
The VELCRO® Brand ONE-WRAP® cable tie is a unique ½” wide back-to-back fastening system that
wraps around cable then back on itself.
Straps per
Max. Bundle
Length
Color
Puck
Diameter
Catalog No. (10-pk)
HPWCVFXX8
8” (203)
See below
10
2.5”
XX = Color: insert 2-letter code: BK=Black, OR=Orange, YL =Yellow, BL=Blue, RD=Red
Bulk VELCRO® Pucks
Width
1"
0.625"
0.5"
0.5"
0.5"
0.5"
* HVFP575
Length
10'
Cut to Length
75'
Cut to Length
75'
Cut to Length
75'
Rip to Length
600'
Cut to Length
75'
Cut to Length
is UL Plenum Rated.
Package
10-Pack
Each
Each
Each
Each
Each
Catalog No.
HPWCVFBK120
HVFBK5875
HVFBK575
HVFBK575S
HVFBK5600
HVFP575*
HVFBK5600
Basic VELCRO® Brand Fasteners
Features/Benefits
Q
Q
Q
Simplifies moves, adds, and changes.
Bundle cables for effective administration.
Wide surface protects cable properties.
The Basic VELCRO® Brand Fasteners consists of 1-inch wide hook strap and a loop strap fused
together. Use to gather cable bundles up to 7.5” diameter.
Cable Management Accessories
Length
22”
9"
5"
XX = Color
Insert 2-letter
Color
black
see below
see below
Max. Bundle Diameter
Catalog No. (10-pk)
7.5”
2.5”
1.4”
MCCMV22BK10
MCCMV9XX10
MCCMV5XX10
code: BK=Black, BL=Blue, YL=Yellow, RD=Red, PK=Pink, OR=Orange.
Screw-Mount, Reusable Cable Ties
Features/Benefits
Specifications
Q
Organize cable along the 19” mounting
rails in cabinets and racks.
X Maximum bundle diameter: 2.5”.
Q
Simplifies moves, adds, and changes.
The screw mount fasteners consist of ¾” wide hook strap and loop strap fused together with a
buckle at one end. The buckle end of the strap also has a through-hole reinforced with a Steel
grommet.
Delivery: One 10-pack of straps.
Length
Color
Max. Bundle Diameter
9"
black
2.5”
9"
orange
2.5”
Catalog No.
MCCMV9BS10
MCCMV9OS10
VELCRO® and ONE-WRAP® are registered trademarks of Velcro Industries B.V.
G16
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
CABLE MANAGEMENT
Cable Management Accessories
VELCRO® Brand Vertical Cable Manager
Features/Benefits
VELCRO® Brand "J" Hook
Features/Benefits
Q
Adhesive backed - mounts
directly to rack or cabinet.
Q
UL-94 Fire-Retardant
fasteners.
Q
4 huge adjustable loops
safely and securely contains
up to 350 Cat 6 cables.
Q
Width of VELCRO® Brand
J Hook is 1".
Q
Bundle diameter varies (as
the loop formed slides larger
or smaller) from 0 to 7.875".
Q
Sold in packs of 50.
Specifications
X 43" adhesive VELCRO®
Brand strip with 23"
adjustable VELCRO® Brand
loops.
Catalog. No.
HVJH
Inexpensively manage cables on
relay racks and cabinets.
Catalog. No.
HVVCM
VELCRO® Brand Work Station Manager
Specifications
VELCRO® Brand Pads and Loops
Features/Benefits
X 21" adhesive VELCRO® Brand
Q
strip with 4" adjustable
VELCRO® Brand loops.
Easily manage cable congestion
at the work station.
Catalog. No.
VELCRO® Brand Cable
Manager on self-adhesive
pad.
Q
Use for small cable builds.
Q
Sold in packs of 25.
Catalog. No.
HVVWM
HVPL
VELCRO® Brand Saddle Cable Ties
Features/Benefits
Rack Label Kit
Features/Benefits
Q
Q
Attach cables to wood
surfaces, or relay racks and
enclosures.
HVSCTR
Attaches to Hubbell’s
Equipment Rack to define
rack unit space.
Specifications
Cable Management Accessories
X Meets TIA/EIA-606-A labeling
administration standards.
HVSCTW
VELCRO®
Width
Length
Max. Loop Diameter
Screw type
Catalog. No.
½"
8"
2.16"/55mm
Rack
½"
8"
2.16"/55mm
Wood
HVSCTR
HVSCTW
Delivery: 3 self-adhesive strips,
black label with white lettering
(numbers 01 through 60).
Dimensions: 35”H x 0.25”W.
Catalog. No.
RRLABEL
RRLABEL
VELCRO® and ONE-WRAP® are registered trademarks of Velcro Industries B.V.
www.hubbell-premise.com
Call 1-800-626-0005
G17
CABLE MANAGEMENT
Ladder Rack
Q
Modular system - easily configured
for new and existing cable routing.
Q
Mounts to floors, walls, ceilings,
equipment racks, and cabinets.
Q
Tip: Secure Ladder to Cabinet tops
using J-bolt kit and drilling holes as
required.
Specifications
X Material: 16 ga. tubular Steel.
X Durable powder coat.
X Stringer dimensions: 0.375”W x 1.5”H.
X Rung spacing: 9.0”.
X Weight capacity: 45 lbs./foot.
Ladder Rack
Straight Section
Catalog No. Black
Catalog No. Gray
Width
6’ (1829) Length
6’ (1829) Length
6” (152)
HLS0606B
HLS0606G
12” (305)
HLS0612B
HLS0612G
18” (457)
HLS0618B
HLS0618G
24” (610)
HLS0624B
HLS0624G
Please order straight sections in multiples of 10 pieces.
Width = outside to outside dimensions.
Catalog No. Black
10’ (3048) Length
Catalog No. Gray
10’ (3048) Length
HLS1006B
HLS1012B
HLS1018B
HLS1024B
HLS1006G
HLS1012G
HLS1018G
HLS1024G
Ladder Rack
90° Turns
Width
G18
Color: Black
Width
6” (152)
12” (305)
18” (457)
24” (610)
Inside Radius 90°
Catalog No.
Flat Turns 90°
Catalog No.
Outside Radius 90°
Catalog No.
HLI0690B
HLI1290B
HLI1890B
HLI2490B
HLF0690B
HLF1290B
HLF1890B
HLF2490B
HLO0690B
HLO1290B
HLO1890B
HLO2490B
Color: Gray
Width
6” (152)
12” (305)
18” (457)
24” (610)
Inside Radius 90°
Catalog No.
Flat Turns 90°
Catalog No.
Outside Radius 90°
Catalog No.
HLI0690G
HLI1290G
HLI1890G
HLI2490G
HLF0690G
HLF1290G
HLF1890G
HLF2490G
HLO0690G
HLO1290G
HLO1890G
HLO2490G
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
Protective End Caps
Use to dress ends of stringers and
cable posts. Black, Qty. 2.
Catalog No.
HLECPK2
Cable Radius Drop
Swivel Splice Kit
Assembled to stringers or rungs to provide
gradual transition for cable.
Finish: Black powder coat
Ladder width Actual width Catalog No.
6” (152)
4.5"
HLCD06*
12” (305)
10.75"
HLCD12
18” (457)
16.75"
HLCD18
Stringer
7.5"
HLCDS
* Can also be mounted on stringer.
Use to splice 2 sections of ladder
at any angle.
Catalog No.
HLP06B
HLP06G
HLP08B
HLP08G
HLP10B
HLP10G
8.3”
8.3”
10.4”
10.4”
12.4”
12.4”
Foot Kit
Use to secure vertical ladder to
floor.
Finish: Black powder coat
Catalog No.
HLRF
J-Bolt Kit
Triangle Wall Support
Mounting Kit to Relay Rack
Use to secure ladder rack to top
of 19” or 23” equipment rack.
Not used for 24"W Ladder Rack.
Color
Depth Catalog No.
Black
5.4”
HLMPK19
www.hubbell-premise.com
HLCF
Vertical Wall Bracket
Use to secure ladder rack
vertically to wall.
Finish: Black powder coat
Catalog No.
HLVWBK
Wall Angle Support
Use to terminate ladder rack to
wall.
Color: Black
Width
Catalog No.*
6-12” (152-305) HLX0612
18” (457)
HLX1518
24” (610)
HLX24
* Add “G” to Catalog No. for
Gray.
Ladder Rack
Use to secure ladder to brackets.
5/16"Øx18"x3” long.
Catalog No.
HLJB
HLSSK
Use to run ladder rack along
wall. Recommended spacing: 5’.
Width
Catalog No.
6” (152)
HLTSB06*
12” (305)
HLTSB12*
18” (457)
HLTSB18*
24” (610)
HLTSB24*
* Add to Catalog No.: ‘B’ for
Black, or ‘G’ for gray
Ceiling Mounting Kit
Use to hang ladder from ceiling.
Recommended spacing between
hangers is 5’.
Description
Catalog No.
Ceiling Mounting HLCMK
Kit with two 6’x 0.625Ø
threaded rods
Brackets only
HLCF
Catalog No.
Black
Use to connect one section of
ladder perpendicular to another.
Catalog No.
HLTK
Use along ladder stringers to maximize
cable routing and management.
Black 6”
Gray 6”
Black 8”
Gray 8”
Black 10”
Gray 10”
Color
T-Junction Splice Kit
Cable Retaining Fence Posts
Nom. Actual
Color Height Height
CABLE MANAGEMENT
Butt Splice Kit
Use to splice two sections of
ladder end to end.
Finish: Black powder coat
Catalog No.
HLBSK
Wall/Rack Mounting Kit
Use to join the top of an
equipment rack to the wall.
Delivery includes: 1 HLMPK19, 1
HLX0612, 1-40" long x 12" wide
ladder section.
Color
Catalog No.
Black
HLWRK
Call 1-800-626-0005
G19
CABLE MANAGEMENT
Wall Mount Hinged Brackets
Q
Jumbo openings in sides and rear.
Q Bottom hinging uses less space to
open.
Q Side hinging allows complete access
to the rear of components.
Q Enhanced cable management -
multiple tie-off points for both nylon
and VELCRO® Brand ties.
Specifications
X 16 ga. Steel construction.
X Finish: durable black powder coat.
HPWWB6U18
X Wall mount holes on 16” centers.
X EIA-310-D universal spacing tapped
#12-24.
X Width: 19”.
X Load capacity:
4 and 6 Rack Units: 50 lbs.
1 and 2 Rack Units: 25 lbs.
Wall Mount Bracket, Bottom-Hinged
HPWWB1U4
Delivery: 1 bottom-hinged wall bracket, completely assembled.
Rack Units
Height
Depth
Catalog No.
HPWWB1U4
1
1.75" (45)
4" (102)
HPWWB2U4
2
3.50" (89)
4" (102)
2
3.50" (89)
8" (203)
4
7.00" (178)
4" (102)
4
7.00" (178)
8" (203)
6
10.50" (267)
4" (102)
6
10.50" (267)
8" (203)
6
10.50" (267)
18" (457)
HPWWB2U4
HPWWB2U8
HPWWB4U4
HPWWB4U8
HPWWB6U4
HPWWB6U8
HPWWB6U18
HPWWB4U8
Wall Mount Bracket, Side-Hinged
Wall Mount Brackets
Delivery: 1 side-hinged wall bracket, completely assembled.
Rack Units
Height
Depth
Catalog No.
BRMCCMB19X35X4
2
3.50" (89)
4" (102)
BRMCCMB19X35X4
4
7.00" (178)
4" (102)
2
3.50" (89)
8" (203)
4
7.00" (178)
8" (203)
BRMCCMB19X7X4
BRMCCMB19X35X8
BRMCCMB19X7X8
BRMCCMB19X7X8
VELCRO® is a registered trademark of Velcro Industries B.V.
G20
Hubbell Premise Wiring • 14 Lord’s Hill Road • Stonington, CT 06378 • Tel: (860) 535-8326 • Fax: (860) 535-8328
Telecom Grounding Bar
Telecom Bonding Conductor
Delivery: 7” x .625” universal
ground clamp (18ga copper),
¼”-20 copper hex nut and brass
flat washer, (1) ¼”-20 copper
ground stud, (1) brass bell cap,
Solderless ground lug with #12
thru-hole, (1) #12-24 x .625”
#3 Philips combo machine screw
with dog point, (2) #12 ground
washers, 15 ft. piece of solid #6
ground wire
RKG
Catalog No.
Delivery: 12” x 4” x .25” solid
copper bus bar (¼”-20 tapped
20 places), Red GFRP isolating
standoffs, (2) .063” thick Stainless
Steel standoff brackets, (4) 3/8”16 x.625” hex head bolts and
lock washers
Catalog No.
RKTGB
19" Rack Mount Ground Bar
Delivery: 19” x 1” solid copper bar, (2) #12-24 mounting
screws and isolating hardware,
(2) #10-32 mounting screws and
isolating hardware
Catalog No. MCCGBAR
500A Braided Strap
Material: Tin-plated braided
copper.
Delivery: (10) 15” long straps,
(10) kits mounting hardware
Catalog No. HPWCGPK10
Wall Mount Cabinet Ground Kit
Delivery: Ground bar with ¼”-20
male studs, (2) ¼”-20 carriage
bolts and isolating hardware, (2)
ground straps
Catalog No.
CABLE MANAGEMENT
Grounding and
Bonding Solutions
Bonding Connector
Delivery: 100 SHIELDBOND®
connectors, 1 Field installation
tool kit
Catalog No. BC285SB100
REKGB
Economy Ground Strap Kit
Delivery: 1 Ground strap with
connectors attached
Catalog No.
REKEGS
Deluxe Cord Grips
Aluminum Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables.
Straight Male Thread
Grip Diameter Range
Inches
(cm)
.375"-.500"
(.95-1.27)
(1.27-1.59)
.625"-.750"
(1.59-1.90)
.750"-.875"
(1.90-2.22)
.375"-.500"
(.95-1.27)
.500"-.625"
(1.27-1.59)
.625"-.750"
(1.59-1.90)
.750"-.875"
(1.90-2.22)
.375"-.500"
(.95-1.27)
.500"-.625"
(1.27-1.59)
.625"-.750"
(1.59-1.90)
.750"-.875"
(1.90-2.22)
.875"-1.000"
(2.22-2.54)
Form
Size
F2
½
F3
¾
F2
¾
F3
1
F4
Catalog No.
07401008
07401010
074011247*
074011248*
07401015
07401017
07401018
074011249*
074011195
07401019
07401021
07401023
07401025
074011250*
Read This Data
It is important that you read all breaking
strength, safety and technical data
relating to the product at:
www.hubbell-wiring.com
1.000"-1.125"
(2.54-2.86)
* Cable jacket may have to be stripped to pass through connector body.
Kellems® Deluxe Cord Grips are suitable for use in hazardous locations per Class I Div. 2, Class II
Div. 1 and 2, Class III Div. 1 and 2 of the National Electric Code Sections 501-4(b), 502-4(a), 5024(b), 503-3(a) and 503-3(b).
www.hubbell-premise.com
Call 1-800-626-0005
G21
Grounding Solutions and Cable Grips
.500"-.625"
Thread Size
N.P.T. (Inches)
½
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising