ViewSonic VS12078 Quick Start Guide

繁
體
中
文
®
ViewSonic
ViewSonic
32/37/42 吋 Full-HD 液晶顯示器
Digital Photo Frame
32/37/42-Inch Full-HD LCD Display
DPX702
- Quick Start Guide
- 使用手冊
- User Guide
ENGLISH
®
Model No. : VT3245-NT / VT3745-NT / VT4245-NT
Model No. : VS12078
Contents
Important Safety Instructions...........................................................................................................................................................................1
Declaration of RoHS Compliance.....................................................................................................................................................................2
Copyright Information.........................................................................................................................................................................................3
Product Registration.............................................................................................................................................................................................3
Antenna Installation Instructions....................................................................................................................................................................4
Cleaning the LCD Display...................................................................................................................................................................................4
Overview of the LCD Display............................................................................................... 5
Product components...........................................................................................................................................................................................5
Front view . .............................................................................................................................................................................................................6
Rear view (32/42-inch).........................................................................................................................................................................................8
Remote Control......................................................................................................................................................................................................9
Remote Control....................................................................................................................................................................................................10
Getting started.......................................................................................................................11
Inserting the remote control batteries........................................................................................................................................................11
Connecting power..............................................................................................................................................................................................11
Cable Connections..............................................................................................................................................................................................12
Basic Operation....................................................................................................................................................................................................15
Basic Operation....................................................................................................................................................................................................16
Using the OSD Menu............................................................................................................17
Picture Adjustment.............................................................................................................................................................................................18
Sound Adjustment..............................................................................................................................................................................................20
TV Tuner Adjustment.........................................................................................................................................................................................22
DTV OSD Functions...............................................................................................................23
PC Setup . ...........................................................................................................................................................................................................25
Setup Adjustment...............................................................................................................................................................................................26
Using a USB Source...............................................................................................................27
Program Guide........................................................................................................................28
Other Information.................................................................................................................29
Troubleshooting..................................................................................................................................................................................................29
Customer Support...............................................................................................................................................................................................30
Limited Warranty.................................................................................................................................................................................................31
ENGLISH
Rear view (32/42-inch).........................................................................................................................................................................................7
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this unit near water.
6.
Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for further instructions.
7.
Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9.
To firmly secure the VT3745-NT LCD Display to your desktop or stand, fasten the anti-tip
auxiliary screw in the support hole for safety concerns.
ᚥཌྷौ᡼ԁҺ˺M4 x 14mm!)1ԍ*
10. Follow the incrtuctions in the image on the right to intall the stand on the VT3245-NT model.
11. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade and the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
12. Protect the power cord from being walked on or pinched particularly at plugs. Convenience
receptacles and the point where they exit from the unit. Be sure that the power outlet is located near
the unit so that it is easily accessible.
13. Only use attachments/accessories specified by the manufacturer.
ViewSonic
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
Important Safety Instructions
14. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the unit. When a cart is used, use caution when moving the cart/unit
combination to avoid injury from tipping over.
15. Unplug this unit when unused for long periods of time.
16. Refer all servicing to qualified service personnel. Servicing is required when the unit has been
damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto
or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate
normally or has been dropped.
17. Operating temperature: 0~40°C.
ENGLISH
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal
waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration
values issued by the European Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Concentration
Actual Concentration
Lead (Pb)
0.1%
< 0.1%
Mercury (Hg)
0.1%
< 0.1%
Cadmium (Cd)
0.01%
< 0.01%
Hexavalent Chromium (Cr6+)
0.1%
< 0.1%
Polybrominated biphenyls (PBB)
0.1%
< 0.1%
Polybrominated diphenyl ethers (PBDE)
0.1%
< 0.1%
Substance
Certain components of products as stated above are exempted under the Annex of the RoHS Directives
as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic
parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
The “HD ready” Logo is a trademark of EICTA.
ViewSonic
VT3245-NT/VT3745-NT/VT4245-NT
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the
performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change
product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
To meet your future needs, and to receive any additional product information as it becomes available, please
register your product on the Internet at: www.viewsonic.com.tw
Product Name:
For Your Records
VT3245-NT, VT3745-NT, VT4245-NT
Model Name:
ViewSonic LCD Full-HD LCD Display
Document Number:
VS12920-1P, VS12921-1P, VS12922-1P
VT3245-NT_UG_TCH Rev. 1A 12-30-09
Serial Number:
VT3745-NT_UG_TCH Rev. 1A 12-30-09
Serial Number:
VT4245-NT_UG_TCH Rev. 1A 12-30-09
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about
proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with environmental
laws of your location.
ViewSonic
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
Product Registration
Antenna Installation Instructions
ENGLISH
1.
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
2.
Lightning
For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges. Do not
disconnect the antenna or the power cord during a heavy storm lighting may strike while you are
holding the cable cord, causing serious injury; turn off your LCD Display and wait for the weather
to improve.
3.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits, When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Antenna
Ground clamp
Antenna discharge unit
Electric service equipment
Ground clamps
Grounding conductors
Power service grounding electrode system
Cleaning the LCD Display
• Make sure the LCD Display is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1.
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2.
If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a
clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1.
Use a soft, dry cloth.
2.
If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD Display
screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD
Display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based
cleaners.
ViewSonic
VT3245-NT/VT3745-NT/VT4245-NT
Congratulation in purchasing the LCD Color Display. This product has been designed to provide you
with a rich audio and video experience. This monitor enables you to watch broadcast or cable television
,channels, connect VCR, VCD or DVD player to watch your favorites movies, or connect a computer to
use the display as a monitor. The LCD Display is equipped with convenient control buttons located on the
front panel and a handy remote control to let you adjust the setting and customize the preferences through
an easy-to -use on screen menu system.
Enjoy the versatility of your LCD Display with its wide variety of features:
Color active matrix TFT LCD Display with remote control
Safe, sturdy construction
Maximum display resolution: 1920 x 1080
Audio / Video support
• HDMI analog audio input
• Component (YCbCr / YPbPr) video/audio input
• S-Video/Audio input
• AV-Video/Audio input
• VGA input
• PC audio input
• Earphone output
On-Screen Display (OSD) menu system
Product components
The following section describes the various components of the LCD Display. Please take a few moments
to familiarize yourself with the product and control panel before using it .
When you unpack this LCD Display, please make sure the box contains the following items:
• LCD Color Display
• Power Cord
• Remote Control (with 2 AAA batteries)
• User Manual
• Quick Start Guide
* If any of these items were missing or damaging, please contact service party for assistance.
Used or discharged batteries must be properly
disposed of or recycled in compliance with all
applicable laws.
For detailed information, contact your local
solid waste disposal authority
Batteries recycle
ViewSonic
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
Overview of the LCD Display
Front view
ENGLISH
Power Indicator LED
1 訊號源 SOURCE
Switch among the input source.
2 選單 MENU
Press the button to enter On Screen Display (OSD).
㿞㰳⑤
3 音量 VOL +/-
䙌ஂ
Increase or decrease the volume.
䷇䞣
4 選擇 CH p/q
䷇䞣
Increase or decrease channel number.
5 電源 POWER
1
2
3
䙌᪛
crease or decrease ch
䙌᪛
4
䳏⑤
Power indicator LED indicates if the LCD power is turned
on (blue) or in stand-by state (red).
ViewSonic
5
VT3245-NT/VT3745-NT/VT4245-NT
Rear view (32/42-inch)
13
14
ENGLISH
15
1
NO
2
3
4
5
6 7 8 9
10
ITEM
11
12
FUNCTION
1
AC-IN
Connect to the AC outlet.
2
S-VIDEO IN
Connect to the S-Video output jack of your video/audio device.
3
AV IN
Connect to the A/V output jack of your A/V device.
4
AV AUDIO IN
Connect to the A/V output jack of your A/V device.
5
HDMI IN
Connect to the HDMI output of your PC or portable computer or A/V
device.
6
PC AUDIO IN
Connect to the audio output of your computer.
7
AUDIO OUT
Connect to the audio input jack of your audio device.
8
PC -IN
Connect to the VGA output of your PC or portable computer.
9
RS232 IN
Connect RS-232 serial port cable for remote control (for service only).
10
COMPONENT IN
11
COMPONENT AUDIO IN
12
AUDIO OUT
Connect to the audio input jack of your Audio device.
ANTENNA/TV MODULE
CONNECTORS
Connect to the ATV signal and DTV signal.
USB
Connect a USB source.
13
14
15
ViewSonic
Connect to the component output jack of your component device.
VT3245-NT/VT3745-NT/VT4245-NT
Rear view (32/42-inch)
13
14
ENGLISH
9
10
11
12
1
NO
2
3
4 5 6
7
ITEM
8
FUNCTION
1
USB
Connect a USB source.
2
PC -IN
Connect to the VGA output of your PC or portable computer.
3
HDMI IN
Connect to the HDMI output of your PC or portable computer or A/V
device.
4
PC AUDIO IN
Connect to the audio output of your computer.
5
AV AUDIO IN
Connect to the A/V output jack of your A/V device.
6
COMPONENT IN
7
COMPONENT AUDIO IN
8
AUDIO OUT
Connect to the audio input jack of your audio device.
9
AV IN
Connect to the A/V output jack of your A/V device.
10
S-VIDEO IN
Connect to the S-Video output jack of your video/audio device.
11
RS232 IN
Connect RS-232 serial port cable for remote control (for service only).
12
AUDIO OUT
Connect to the audio input jack of your Audio device.
ANTENNA/TV MODULE
CONNECTORS
Connect to the ATV signal and DTV signal.
13
14
ViewSonic
Connect to the component output jack of your component device.
VT3245-NT/VT3745-NT/VT4245-NT
Remote Control
1 電源 POWER
Turn power ON or OFF.
電源
1
電視
色差
電腦
音樂



數位相框
2
2 SOURCE HOTKEYS
Press the hotkeys to select the input source.
3 頻道往返 RETURN
Switch to the previous viewed channel.
4 音量 +/- VOL+/Increase + or decreases - the volume.
Disable the audio output.
頻道往返
3
6 離開 EXIT
Exit OSD menus.
音量
頻道
顯示
靜音
訊號源
離開
4
7 OSD MENU UP/FAST FORWARD
Move up in OSD menus/fast forward media.
8 OSD MENU RIGHT/SKIP FORWARD
5
6
Move right in OSD menus/skip to next media.
9 確認 ENTER/PLAY
7
確認
節目指南
10 選單 MENU
9
Press to enter current source OSD Menu.
10
11 音效 SOUND MODE
選單
11
雙語
凍結
影像
音效
12
ViewSonic
Enter the selected OSD item/Play media.
8
Select the desired Sound Mode.
12 影像 PICTURE MODE
Switch among four picture modes to change the picture
quality : USER, STANDARD, VIVID, SOFT.
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
5 靜音 MUTE
Remote Control
13 凍結 FREEZE
Freeze the present image on the screen. To continue,
press the button again.
電源
電視
色差
電腦
音樂



數位相框
14 雙語 MTS
Switch between monaural, stereo, and audio modes.
This function enable you to receive a second language or
unrelated audio.
15 GUIDE (ONLY IN DTV OSD MENU)
Enter the program guide of DTV OSD.
21
16 睡眠 SLEEP TIMER
ENGLISH
頻道往返
Press repeatedly to set the sleep timer from 15 to 60
minutes.
17 OSD MENU LEFT/SKIP BACKWARD
20
Move left in OSD menus/skip to previous media
18 訊號源 SOURCE
19
18
音量
頻道
顯示
Select the video source signal.
靜音
訊號源
離開
19 顯示 DISPLAY
Press to display the information of input signal.
20 頻道 CHANNEL +/17
確認
Press the + or - keys to increase or decrease the channel
number.
16
21 數字鍵 NUMBER KEYS
15
節目指南
選單
Press the number keys to enter channel numbers.
14
雙語
凍結
影像
音效
13
ViewSonic
10
VT3245-NT/VT3745-NT/VT4245-NT
Getting started
Please refer to the following sections for detailed instructions about connecting the audio/ video (AV)
device of your LCD Display and view your favorite programmes or movies .These sections describe the
basic procedures required to set up your Display for easy and convenient viewing.
Inserting the remote control batteries
Insert the two AAA batteries provided into the remote control as described below:
Pull the latch on the battery compartment cover on the rear of the remote control and remove the
cover.
2.
Insert the two supplied AAA batteries .Check the + and - ends of the batteries before inserting them
in the compartment.
3.
Replace the cover and make sure it snaps securely back into place.
(A)
(A)
(B)
1
ENGLISH
1.
(B)
2
3
• Do not mix old and new batteries or batteries of different types together.
• Do not short -circuit ,disassemble ,heat or fire batteries.
• Remove the batteries to avoid damage from possible battery leakage if you anticipate that the remote
control will not be used for an extended period of time.
• Please handle the remote control with care. Avoid dropping it ,getting it wet ,or placing it in direct
sunlight, near a heater or in an area of high humidity.
Connecting power
1.
Connect the supplied power cord to the AC IN jack on the rear of Display.
2.
Connect the other end of the power cord to a power outlet.(AC 110V 60Hz).
ViewSonic
11
VT3245-NT/VT3745-NT/VT4245-NT
Cable Connections
PC Connector
HDMI
VGA
ENGLISH
DVI
Supported Resolutions
Compatibility table of PC
Mode
Standard
Resolution
Inputs
Composite
SVHS
YPbPr
RGB
HDMI
DOS
720x400(70Hz)
No
No
No
Yes
Yes
VESA
640x480(60Hz)
No
No
No
Yes
Yes
VESA
800x600(60Hz)
No
No
No
Yes
Yes
VESA
1024x768(60Hz)
No
No
No
Yes
Yes
VESA
1360x768(60Hz)
No
No
No
Yes
Yes
VESA
1280x720(60Hz)
No
No
No
No
Yes
VESA
1280x1024(60Hz)
No
No
No
Yes
Yes
VESA
1920x1080(60Hz)
No
No
No
Yes
Yes
ViewSonic
12
VT3245-NT/VT3745-NT/VT4245-NT
Other Connections
(37-inch)
1
2
3
4
5
3
2
1
S-video cable
Connect to devices with S-video output such as DVD
players, Digital cameras, and satellite receivers.
2
A/V connector
Connect to devices with A/V output such as VCRs,
VCD players, and DVD players.
3
HDMI
Connect to devices with HDMI output such as Blu-ray
players, DVD players, Cable boxes, VCR / VCD players, PCs, and portable PCs.
Component cable
Connect to devices such as DVD players, Digital TV
receivers, and Digital satellite receivers.
4
5
ViewSonic
4
5
1
Audio cable
Connect to devices with audio output such as DVD recorders, VCRs, and Home theater audio equipment.
13
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
(32/42-inch)
Compatibility table of Video
Mode
Inputs
ENGLISH
Standard
Resolution
Composite
SVHS
YPbPr
RGB
HDMI
NTSC
480i(60Hz)
Yes
Yes
Yes
No
Yes
EDTV
480p(60Hz)
No
No
Yes
No
Yes
SDTV
576i(60Hz)
No
No
Yes
No
Yes
SDTV
576p(60Hz)
No
No
Yes
No
Yes
HDTV
720p(50Hz)
No
No
Yes
No
Yes
HDTV
720p(60Hz)
No
No
Yes
No
Yes
HDTV
1080i(50Hz)
No
No
Yes
No
Yes
HDTV
1080i(60Hz)
No
No
Yes
No
Yes
HDTV
1080p(50Hz)
No
No
Yes
No
Yes
HDTV
1080p(24Hz)
No
No
No
No
Yes
HDTV
1080p(60Hz)
No
No
Yes
No
Yes
Notes:
Refer to these notes before connecting any audio / video equipment to this Display:
• Refer to the manuals of your Display, stereo, or other equipment.
• Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only
after you have completed connecting everything. Never make or change connections when equipment
still connected to a power outlet.
• Connect DVD player directly to the Display. For example, do not connect DVD player to VCR and
then connect the VCR to your Display. This type of connection could distort both the picture and the
sound. Your VCR might have a copy protection system which could distorted the DVD image.
• Set the stereo system to the correct channel or source if your video equipment is also connected to a
stereo system.
• You only need one audio connection and one video connection between your Display and other audio/
video equipment (such as DVD player, VCR, Camcorder). This means it is possible you will not use
all the jacks on the Display.
• If you plan to watch Display via your DVD player or VCR, connect a coaxial cable to the DVD
player’s or VCR’s TUNER IN jack then connect to the antenna jack on your LCD Display. This allows
you to watch channels on the Display normally when the DVD player or VCR is off.
• The function of your existing audio/video equipment, governing the connection mode between your
Display and existing audio/video equipment. Progressive Scan Component Video and Component
Video have the highest picture quality but it can only be used if the connected video equipment
supports Progressive Scan Component Video or component video. S-Video provides a high signal
quality. Composite Video (a yellow Video jack ) provides a good video output. Please follow the
correct step to connect existing audio/video equipment.
ViewSonic
14
VT3245-NT/VT3745-NT/VT4245-NT
Basic Operation
1
5
Press the POWER key to turn on or off the power of the LCD Display. The indicate light is blue
as power ON and orange as power OFF.
4
䙌ஂ
3
䷇䞣
2
䷇䞣
3
䙌᪛
1
䳏⑤
Select Channel
Press 選擇 ▲▼ or ­頻道+/- key to increase or
decrease the channel number.
2
䙌᪛
Turn the LCD Display ON
Adjust Volume
Press 音量+/- key to increase (+) or decrease (-)
the volume.
電源
1
電視
色差
電腦
音樂



數位相框
4
Menu
Press 選單 key to enter current source OSD
Menu.
5
Switch the input source
Press 訊號源 key to list input source.
Press pq key to choose the input source, select
and switch the wanted input source.
Press 確認 to adjust.
頻道往返
Use the Source Hotkeys to select the input
source directly.
音量
頻道
2
3
顯示
5
靜音
訊號源
離開
確認
節目指南
雙語
ViewSonic
選單
凍結
影像
4
音效
15
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
㿞㰳⑤
Basic Operation
6
電源
電視
色差
電腦
音樂



數位相框
Display
Press 顯示 key to display channel number (in
TV mode) and information of ouput signal.
7
MTS
Press 雙語 key to switch monaural and stereo
modes. This function enable you to receive a
second language or unrelated audio.
8
PICTURE MODE
Press 影像 key to change the picture quality :
USER, STANDARD, VIVID, SOFT.
ENGLISH
9
頻道往返
Sound Mode
Press 音效 key repeatedly to select sound
mode.
音量
頻道
6
顯示
靜音
訊號源
離開
確認
節目指南
雙語
7
ViewSonic
選單
凍結
影像
8
音效
9
16
VT3245-NT/VT3745-NT/VT4245-NT
Using the OSD Menu
The On-Screen Display (OSD) menu system provides a quick and simple method to adjust LCD Display
base setting. OSD menu can be viewed using both the remote control and the control buttons on the
control panel.
HDMI-1
PICTURE
STANDARD
NOISE REDUCTION
WEAK
COLOR TEMP
STANDARD
AUTO Gamma
ON
DCR
OFF
ENGLISH
PICTURE MODE
: Move
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
1 Press 選單 key on the control panel or the remote control to view OSD menu.
2 Press pq key to select the function.
3 Press 確認 key to enter the sub menu.
4 Press pq key to select the item and press tu to adjust.
5 Press 選單 key on the control panel or 離開 key on the remote control to exit OSD menu.
After change settings on the OSD menu, the new settings are confirmed automatically
when OSD picture vanish, even did not press the menu to exit the OSD system.
ViewSonic
17
VT3245-NT/VT3745-NT/VT4245-NT
Picture Adjustment
The Picture adjustment enables you to
adjust Brightness, Contrast, Sharpness,
Color, Hue, Color Temp, and Dynamic
Contrast.
1
Press 選單 key on the control panel or the remote control to view OSD menu.
HDMI-1
ᐙቝ
ᐙቝᑓ‫ڤ‬
: ฝ೯
2
۞ྥ
ᠧಛ‫ࠫލ‬
இ
‫ۥ‬ᄵ
۞ྥ
೯ኪGamma
ၲ
೯ኪኙֺ
ᣂ
ᒔᎁ :ᙇᖗ
ᙇ໢ :‫ڃ‬Ղԫ଄
ENGLISH
PICTURE
HDMI-1
PICTURE MODE
: Move
3
ᠦၲ:ಯ‫נ‬
Press pq key to select [PICUTURE] mode.
Press tu or +/- key to select (PICTURE MODE)
item.
STANDARD
NOISE REDUCTION
WEAK
COLOR TEMP
STANDARD
AUTO Gamma
ON
DCR
OFF
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press tu or +/- key to select User, Standard,
Vivid, or Soft.
PICTURE
HDMI-1
PICTURE MODE
: Move
VIVID
NOISE REDUCTION
WEAK
COLOR TEMP
STANDARD
AUTO Gamma
ON
DCR
OFF
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
In preset Picture Modes, it is allowed to adjust each subpicture-item setting. Press pq
key to select item and press tu key or +/- key to adjust setting.
ViewSonic
18
VT3245-NT/VT3745-NT/VT4245-NT
4
Press 選單 key on the control panel or 離
開 key on the remote control to exit OSD
menu.
(Brightness)
Adjust the levels of light on your screen. It
should be used in conjunction with the contrast option.
(Contrast)
Adjust the difference between the dark and
light level on your screen.
(Color)
Change the dominant color intensity on your
screen. Adjust this setting until the colors on
the screen look natural.
(Hue)
Change the color balance. Adjust this setting
so that colors on the screen are neither too
green or too magenta.
(Not applicable in PC mode)
(NOISE REDUCTION)
Press tu or +/- key to adjust the level of the
noise removal (OFF, WEAK, MEDIUM, or
STRONG. .
(Color Temperature)
Adjust the image color intensity:
USER, Standard, Cool, Warm
(AUTO GAMMA)
Press tu or +/- key to to turn on/off the auto
gamma adjustment on the picture.
(Not applicable in PC mode)
(DCR)
Turn on of off auto contrast adjustment.
(Not applicable in PC mode)
ViewSonic
19
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
(Sharpness)
Adjust the sharpness level on your screen.
Sound Adjustment
The Sound adjustment enables you to
adjust volume, treble, bass, balance,
speaker output and surround setting.
1
Press 選單 key on the control panel or the remote control to view OSD menu.
HDMI-1
PICTURE
PICTURE MODE
: Move
2
STANDARD
NOISE REDUCTION
WEAK
COLOR TEMP
STANDARD
AUTO Gamma
ON
DCR
OFF
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press pq key to select [Sound] mode.
Press tu or +/- key to enter sub-menu.
HDMI-1
SOUND
ENGLISH
STANDARD
SOUND MODE
BALANCE
: Move
3
0
SPEAKER
ON
HDMI AUDIO OUTPUT
ON
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press tu key to select (Sound Mode).
HDMI-1
SOUND
STANDARD
SOUND MODE
BALANCE
: Move
0
SPEAKER
ON
HDMI AUDIO OUTPUT
ON
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
In default sound mode, it is allowed to adjust each sub audio-item setting. Press pq key
to select an item and press tu key or +/- key to adjust the settings.
ViewSonic
20
VT3245-NT/VT3745-NT/VT4245-NT
4
Press tu or +/- key to select Standard,
Music, Movie, Speech, User.
5
Press 選單 key on the control panel or 離
開 key on the remote control to exit OSD
menu.
(Treble/Base)
Adjust the high frequency content in audio
output.
(AUTO VOLUME)
Turn Auto Volume Control on or off.
(SPEAKER)
Turn auto speaker adjustment on or off.
(HDMI AUDIO INPUT)
Select the audio input source:
HDMI, VGA
ViewSonic
21
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
(Balance)
Balance the volume of right and left speakers.
TV Tuner Adjustment
• The Tuner Adjustment enables
user to adjust the settings of tuner
function.
• Tuner Adjustment can only be
operated in TV mode.
1
Press 選單 key on the control panel or the remote control to view OSD menu.
HDMI-1
PICTURE
PICTURE MODE
: Move
2
STANDARD
NOISE REDUCTION
WEAK
COLOR TEMP
STANDARD
AUTO Gamma
ON
DCR
OFF
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press pq key to select [Channel] mode.
Press tu or +/- key to enter sub-menu.
TV
CHANNEL
ENGLISH
CATV/AIR
CATV
AUTO SEARCH
ˑˑ
CHANNEL EDIT
ˑˑ
SIGNAL STRENGTH
: Move
3
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press pq key to select (CATV/AIR).
TV
CHANNEL
CATV/AIR
CATV
AUTO SEARCH
ˑˑ
CHANNEL EDIT
ˑˑ
SIGNAL STRENGTH
: Move
4
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press pq key to select (AUTO SEARCH) and press
u to start scanning channels.
SEARCHING
CHANNELS : 0
24%
ᙇ໢ : Stop
5
ViewSonic
Press 選單 key on the control panel or 離開 key on
the remote control to exit OSD menu.
22
VT3245-NT/VT3745-NT/VT4245-NT
DTV OSD Functions
The DTV OSD (On-Screen Display ) menu present user a consistent look and feel throughout. User can
adjust the DTV channel system setting in this menu.
First time enter DTV OSD, the DTV channel system will be automatically search all
channels.
Press 選單 key on the control panel or the remote control to view OSD menu.
Press pq key to select [DTV] mode then press tu or +/- key to enter sub-menu (make sure the input
source is in DTV mode).
DTV OSD MENU includes these main options:
DTV
ENGLISH
• Auto Search
• CHANNEL EDIT
• SIGNAL STRENGTH
CHANNEL
AUTO SEARCH
ˑˑ
CHANNEL EDIT
ˑˑ
SIGNAL STRENGTH
: Move
ViewSonic
ᒔᎁ : Select
ᙇ໢ : Return
23
ᠦၲ: Exit
VT3245-NT/VT3745-NT/VT4245-NT
DTV Channel Management
1
Press pq key to select (Channel edit).
Press u key to enter the Channel edit submenu.
DTV
CHANNEL
103
104
105
106
107
108
109
110
111
112
: Move
ENGLISH
DTV Functions
ADD
ADD
ADD
ADD
ADD
DELETE
DELETE
DELETE
DELETE
DELETE
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ˍʳAdd/Delete
ᒔᎁ : Select
ˍʳ�Favorite
2
Press 選單 key on the control panel or 離開 key on
the remote control to exit OSD menu.
1
Press pq key to select (Auto Search) item and
press u to start scanning channels.
DTV
CHANNEL
AUTO SEARCH
ˑˑ
CHANNEL EDIT
ˑˑ
SIGNAL STRENGTH
: Move
2
3
ViewSonic
ᒔᎁ : Select
ˍʳAdd/Delete
ˍʳ�Favorite
Discovered TV channels are displayed in the corresponding panels.
Press pq key to select (signal strength).
Press tu key to adjust the level of the signal
strength.
Press tu to select a channel to scan. The signal
strength and quality are displayed at the bottom of the
screen.
Press [PLAY] to add the selected channel to the channel list.
Press 選單 key on the control panel or 離開 key on
the remote control to exit OSD menu.
24
VT3245-NT/VT3745-NT/VT4245-NT
The PC Setup adjustment enable you to
adjust PC mode settings: Auto Adjust, H Position, V Position,
Phase, and Clock (make sure the
input source is in PC mode).
1
Press 選單 key on the control panel or the remote control to view OSD menu.
VGA
PC SETUP
AUTO ADJUST
: Move
2
0
V POSITION
0
PHASE
0
CLOCK
0
ᒔᎁ : Select
ᙇ໢ : Return
PC SETUP
AUTO ADJUST
: Move
OFF
H POSITION
0
V POSITION
0
PHASE
0
CLOCK
0
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press pq key to select (Auto Adjust).
Press u key to auto adjust screen to the best position.
PC SETUP
VGA
AUTO ADJUST
: Move
4
ᠦၲ: Exit
Press pq key to select [PC Setup] mode.
Press tu or +/- key to enter sub-menu.
VGA
3
OFF
H POSITION
OFF
H POSITION
0
V POSITION
0
PHASE
0
CLOCK
0
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press pq key to select PC Setup parameters.
Press tu key to adjust the screen to the best position:
• H Position—adjust the horizontal position of the
screen.
• V Position—adjust the vertical position of the
screen.
• Phase—adjust phase for the display.
• Clock—adjust the clock frequency of display.
ViewSonic
25
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
PC Setup
Setup Adjustment
• The Setup adjustment enables
you to adjust Language, OSD
Time, Sleepp Timer, Clock
mode, clock set, screen
mode, Aspect, blue back,
and Backlight.
• You can reset all the OSD settings
in this option.
1
Press 選單 key on the control panel or the remote control to view OSD menu.
SETUP
HDMI-1
LANGUAGE
: Move
2
ENGLISH
OSD TIME
15 SEC
SLEEP TIMER
OFF
ASPECT
FULL
BLUE BACK
RESET
OFF
ˑˑ
VERSION
VS32_V0.12
ᒔᎁ : Select
ᙇ໢ : Return
HDMI-1
SETUP
ENGLISH
LANGUAGE
: Move
3
ENGLISH
OSD TIME
15 SEC
SLEEP TIMER
OFF
ASPECT
FULL
BLUE BACK
RESET
OFF
ˑˑ
VERSION
VS32_V0.12
ᒔᎁ : Select
ᙇ໢ : Return
Press tu key to select English or 或繁體中文.
SETUP
LANGUAGE
: Move
ViewSonic
ᠦၲ: Exit
Press pq key to select (Language).
HDMI-1
4
ᠦၲ: Exit
Press pq key to select [Setup] mode.
Press tu or +/- key to enter sub-menu.
ENGLISH
OSD TIME
15 SEC
SLEEP TIMER
OFF
ASPECT
FULL
BLUE BACK
RESET
OFF
ˑˑ
VERSION
VS32_V0.12
ᒔᎁ : Select
ᙇ໢ : Return
ᠦၲ: Exit
Press pq key to select (Reset).
Press u key to Restore to the factory original setting.
26
VT3245-NT/VT3745-NT/VT4245-NT
Using a USB Source
Insert a USB key containing valid file formats into the slot on the display and press 訊號源 key on the
control panel or 音樂 key on the remote control to select (USB) source.
Music
SELECT ALL
˃˃ˍ˃˃ˍ˃˃Γ˃˃ˍ˃˃ˍ˃˃
ARTIST
NAME
ALBUM
PLAY
STOP
NEXT
USB device is not connected
RETURN
ENGLISH
SETUP
Supported File Formats
PHOTO
AUDIO
Device
File System
JPEG
File types: *.JPG
Compatible File Format: JPEG Baseline (4:2:2/4:2:0)
Maximum Resolution: 7680*4320 (1920x4*1080x4) pixels
BMP
Not supported
GIF
Not supported
MPEG 1
File Type: *.mp3
Layer 3
PC Support Timing (kHz): 32, 44.1,48
Supported Bit rate (Kbits/sec): 32, 40, 48, 56, 64, 80, 96, 112,
128, 160,192, 224, 256, 320
MPEG 2
File Type: *.mp3
Layer 3
PC Support Timing (kHz): 22.05, 24
Support Bit rate (Kbits/sec): 16, 24, 32, 40, 48, 56, 64, 80, 96,
112,128,160
Others
Not supported
USB host 2.0 is compatible with USB 1.1
Not supported: USB Hub, USB 2.0 OTG (On The Go)
and USB mass storage drivers
Support FAT32 USB Flash memory sticks
Maximum supported memory size: 32GB
Maximum supported number of songs on a memory card: 3000
Press 音樂 key or 數位相框 key on the control to select the desired media type:
• Press 音樂 key to play music
• Press 數位相框 key to view photos
ViewSonic
27
VT3245-NT/VT3745-NT/VT4245-NT
Program Guide
ENGLISH
Press 節目指南 key on the remote control and wait for few seconds, the LCD Display will show the
program guide subpage.
There are six parts in the Program Guide:
1. Date and time: Shows the current date and time by day/month/year (DD/MM/YYYY).
2. Time range: EPG shows the program list within a 2-hour range. Current program will be shown in the
first block.
3. Channel menu: Shows all channel names.
4. Program List: Descends the manifestation program name in time zone according to the program
length.
5. Program time and name: Displays the program time and full name.
6. Program account: Presents more detail information if any.
The following keys are relevant to the operation:
pqtu keys: browses the channels
確認/PLAY key: selects and change the channels
選擇pq key: page up or down
ViewSonic
28
VT3245-NT/VT3745-NT/VT4245-NT
Other Information
Troubleshooting
No power
• Make sure the Display and the power cord are connected correctly.
• Check if you pressed POWER on the remote control unit. If the indicator in the front panel is red, press
POWER in the remote control or the front control panel.
No picture
• Connect to local CATV system equipment, and make sure the signal is unlocked.
• Make sure the Display and the Audio/Video signal input devices are connected correctly.
• In PC (VGA) mode, the screen turns off automatically 2 minutes after no signal input detected.
In the other modes, the screen turns off automatically 15 minutes after no signal input detected.
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting.
No sound
• Make sure the Mute function is not operated.
• When signal passed by the HDMI distribution amplifier, that may result in this situation.
Remote control unit does not operate
•
•
•
•
•
Check if the batteries are inserted with the polarity(+,-)correctly aligned.
Check if the batteries are discharged. Please replace with new batteries.
Make sure that you do not use the remote control under strong or fluorescent lighting.
Check if there is a fluorescent light illuminated near the remote control sensor.
The path of the remote control beam may be blocked; please make sure the path is clear and that
remote control is aimed at the remote control sensor in the Display.
Power is cut off suddenly
• Check if the off timer or sleep timer are set.
• The unit’s internal temperature has increased. Remove any objects blocking the vents and clean them
to remove dust.
Picture is cut off /with side bar screen
• Check if the image position is correct.
• Check if the screen mode adjustments such as picture size are made correctly.
LCD Display does not operate
External influences such as lightning or static electricity may cause improper operation. In this case,
operate the unit after first turning on the power, or plugging the AC cord and plugging it in again after 1
to 2 minutes.
ViewSonic
29
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
Strange color, light color, or color misalignment
Customer Support
For technical support or product service, see the table below or contact your reseller.
You will need the product serial number.
Country/
Region
Website
Taiwan
www.viewsonic.com.tw
T=Telephone
E-mail
F= Fax
T=886 2 2246 3456
F=886 2 2249 1751
[email protected]
Toll Free=0800 061 198
Hong Kong www.hk.viewsonic.com/support/ T= 852 3102 2900
[email protected]
ENGLISH
ViewSonic
30
VT3245-NT/VT3745-NT/VT4245-NT
Limited Warranty
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option,
repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts
or components.
How long the warranty is effective:
ViewSonic LCD Displays are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date of the
first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow
instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
4. Removal, installation, and set-up service charges.
5. When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer Support
page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d)
a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty
of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product,
loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other
commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do
not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your
local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and
conditions of the Maintenance Guarantee Card.
For users in Europe and Russia, full details of warranty providedcan be found in www.viewsoniceurope.com under Support/Warranty Information.
4.3: ViewSonic LCD Display Warranty
LTV_LW01 Rev. 1C 06-25-07
ViewSonic
31
VT3245-NT/VT3745-NT/VT4245-NT
ENGLISH
VIEWSONIC® LCD Display