ViewSonic | VSXXXXX | User's Manual | ViewSonic VSXXXXX User's Manual

ViewSonic VSXXXXX User's Manual
Service Manual
ViewSonic VG2427wm
Model No. VSXXXXX
23.6” Color TFT LCD Display
(VG2427wm_SM Rev. 1a Mar. 2009)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright © 2008 by ViewSonic Corporation. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of ViewSonic
Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranty of merchantability or fitness for any
particular purpose. Further, ViewSonic reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation of ViewSonic to notify any
person of such revision or changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Product disposal at end of product life
The lamp in this product contains mercury. Please dispose of in accordance with local, state or
federal laws.
Revision History
Revision
SM Editing Date
Description of Changes
TPV Model
Editor
TDRMNDDKWBVSPC
1a
03/27/2009
TDRMNDDYWBVSPC
Initial Release
TDRMNDDCWBVSPC
TDRMNDDBWBVSPC
2
Eric
TABLE OF CONTENTS
1. Precautions and Safety Notices ......................................................................................... 4
2. Specification ....................................................................................................................... 7
3. Front Panel Function Control Description ....................................................................... 8
4. Circuit Description ............................................................................................................. 13
5. Adjusting Procedure .......................................................................................................... 24
6. Trouble Shooting Flow Chart ............................................................................................ 32
7. Block Diagrams ................................................................................................................ 33
8. Schematic Diagrams ........................................................................................................ 35
9. PCB Layout Diagrams ...................................................................................................... 44
10. Exploded Diagram and Spare Parts List ........................................................................ 50
11. Recommended Spare Parts List .................................................................................... 53
12. Different Parts List ........................................................................................................... 66
3
1. Precautions and Safety Notices
1. Precautions and Safety Notices
1.1 Safety Precautions
This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper
use or installation may cause damage to the monitor as well as the user. Carefully go over the following WARNINGS
before installing and keep this guide handy.
WARNINGS
.This monitor should be operated only at the correct power sources indicated on the label on the rear end of the
monitor. If you’re unsure of the power supply in your residence, consult you local dealer or power company.
.Use only the special power adapter that comes with this monitor for power input.
.Do not try to repair the monitor your self as it contains no user-serviceable parts. This monitor should only be
repaired by a qualified technician.
.Do not remove the monitor cabinet. There is high-voltage parts inside that may cause electric shock to human
bodies, even when the power cord is unplugged.
.Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
.Put your monitor only in a clean, dry environment. If it gets wet, unplug the power cable immediately and consult
your service technician.
.Always unplug the monitor before cleaning it .Clean the cabinet with a clean, dry cloth. Apply non-ammonia based
cleaner onto the cloth, not directly onto the glass screen.
.Keep the monitor away from magnetic objects, motors, TV sets, and transformer.
.Do not place heavy objects on the monitor or power cord.
1.2 Product Safety Notice
Many electrical and mechanical parts in this chassis have special safety visual inspections and the protection
afforded by them cannot necessarily be obtained by using replacement components rated for higher voltages,
wattage, etc. Before replacing any of these components read the parts list in this manual carefully. The use of
substitute replacement parts which do not have the same safety characteristics as specified in the parts list may
create shock, fire, or other hazards.
1.3 Service Notes
1. When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
2. When replacing a high wattage resistor (more than 1W of metal oxide film resistor) in circuit board, keep the
resistor about 5mm away from circuit board.
3. Keep wires away from high voltage, high temperature components and sharp edges.
4. Keep wires in their original position so as to reduce interference.
5. Usage of this product please refer to also user’s manual.
4
1.4 Handing and Placing Methods
Correct Methods:
Only touch the metal frame of the LCD panel or the
front cover of the monitor. Do not touch the surface of
the polarizer.
Take out the monitor
Incorrect Methods:
Surface of the LCD panel is pressed by fingers and that
may cause “Mura.”
Taking out the monitor by grasping the LCD panel. That
may cause “Mura.”
5
Place the monitor on a clean and soft foam pad.
Placing the monitor on foreign objects. That could
scratch the surface of the panel or cause “Mura.”
Place the monitor on the lap, the panel surface must
The panel is placed facedown on the lap. That may
be upwards.
cause “Mura.”
6
2. Specification
7
3. Front Panel Function Control Description
Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The
OSD controls are explained at the top of the next page and are defined in “Main Menu Controls”.
8
Do the following to adjust the display setting:
1. To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable
through the OSD timeout setting in the setup menu.
2. To select a control to adjust, press
or
to scroll up or down in the Main Menu.
3. After the desired control is selected, press button [2]. A control screen like the one shown below appears.
The line at the bottom of the screen
shows the current functions of buttons 1
and 2: Exit or select the Brightness
control.
4. To adjust the control, press the up
or down
buttons.
5. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust the computer's graphics card so that it outputs a 1920 x 1080 @ 60Hz video signal to the LCD display.
(Look for instructions on “changing the refresh rate” in the graphics card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely
visible. (The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD
display.)
9
Main Menu Controls
Adjust the menu items shown below by using the up
Control
and down
buttons.
Explanation
Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate
waviness and distortion. Press the [2] button to obtain a sharper image.
NOTE: Auto Image Adjust works with most common video cards. If this function does not work on
your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set
value.
Contrast adjusts the difference between the image background (black level) and the foreground
(white level).
Brightness adjusts background black level of the screen image.
Audio Adjust
Volume increases the volume, decreases the volume, and mutes the audio.
Mute temporarily silences audio output.
Color Adjust provides several color adjustment modes, including preset color temperatures and
a User Color mode which allows independent adjustment of red (R), green (G), and blue (B). The
factory setting for this product is 6500K (6500 Kelvin).
sRGB-This is quickly becoming the industry standard for color management, with support being
included in many of the latest applications. Enabling this setting allows the LCD display to more
accurately display colors the way they were originally intended. Enabling the sRGB setting will
cause the Contrast and Brightness adjustments to be disabled.
9300K-Adds blue to the screen image for cooler white (used in most office settings with
fluorescent lighting).
7500K-Adds blue to the screen image for cooler white (used in most office settings with
fluorescent lighting).
6500K-Adds red to the screen image for warmer white and richer red.
5000K-Adds red to the screen image for warmer white and richer red.
User Color Individual adjustments for red (R), green (G), and blue (B).
1. To select color (R, G or B) press button [2].
2. To adjust selected color, press
and
.
Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing
Mode, colors return to the 6500K factory preset.
10
Information displays the timing mode (video signal input) coming from the graphics card in the
computer, the LCD model number, the serial number, and the ViewSonic® website URL. See your
graphics card’s user guide for instructions on changing the resolution and refresh rate (vertical
frequency).
NOTE: VESA 1920 x 1080 @ 60Hz (recommended) means that the resolution is 1920 x 1080 and
the refresh rate is 60 Hertz.
Manual Image Adjust displays the Manual Image Adjust menu.
H./V. Position (Horizontal/Vertical Position) moves the screen image left or right and up or
down.
H. Size (Horizontal Size) adjusts the width of the screen image.
Fine Tune sharpens the focus by aligning text and/or graphics with pixel boundaries.
NOTE: Try Auto Image Adjust first.
Sharpness adjusts the clarity and focus of the screen image.
Dynamic Contrast allows the user to turn the contrast ratio enhancement on or off.
Aspect ratio Selects the image size for 4:3 and full screen.
ECO Mode provides the lower power consumption by reducing the brightness.
Standard: The default brightness setting.
Optimize: Decreases the brightness by 25 %.
Conserve: Decreases the brightness by 50 %.
Setup Menu displays the menu shown below:
11
Language Select allows the user to choose the language used in the menus and control screens.
Resolution Notice advises the optimal resolution to use.
OSD Position allows the user to move the OSD menus and control screens.
OSD Timeout sets the length of time the OSD screen is displayed. For example, with a “15
second” setting, if a control is not pushed within 15 seconds, the display screen disappears.
OSD Background allows the user to turn the OSD background On or Off.
Memory Recall returns the adjustments back to factory settings if the display is operating in a
factory Preset Timing Mode listed in the Specifications of this manual.
Exception: This control does not affect changes made with the User Color control, Language
Select or Power Lock setting.
12
4. Circuit Description
4.1 Main Board
U401 NT68667UFG/C
The NT68667 is a highly integrated flat panel display controller that interfaces analog, digital, and video inputs. It
combines a triple ADC, a DVI compliant TMDS receiver, a digital YUV receiver, a high quality zoom and shrink
engine , a multi-color on screen display (OSD) controller , an advanced color engine , and many other functions in a
single chip. It provides the user with a simple, flexible and cost-effective solution for various flat panel display
products.
The NT68667 operates at frequencies up to 188MHz/190Mhz, suitable for LCD monitor up to
1680x1050/1920x1080 resolution. The NT68667 also has a built-in noise reduction function to provide more stable
video quality, spread spectrum to provide low EMI solution, sRGB for video color space convert and post pattern for
manufacture test.
The display provided single/double pixel clock LVDS interface.
In addition, NT68667 includes an integrated 8-Bit Microcontroller (MCU). It contains an 8-bit 8031 micro-controller,
1,280-bytes internal data memory, four 7-bit resolution A/D Converter, 10-channel 8-bit resolution PWM DAC,
two16-bit timer/counters, and a UART. Except those, it has two-channel hardware DDC solution, and VESA 2Bi/2B+
master/slave I2C bus interface.
Block Diagram
13
Pin Assignment
14
15
16
17
U701 AP1117D33L and U704 AP1117E18LA: DC power convert, convert to 3.3v and 1.8v.
AP1117 is a low dropout positive adjustable or fixed-mode regulator with 1A output current capability. The product is
specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus
termination and low current 3.3V logic supply. AP1117 is also well suited for other applications such as VGA cards.
AP1117 is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated
outputs of 1.25 to 5.0 with 6.4V to 18V input supply.
18
Pin Descriptions
Name
Adj (GND)
Vout
I/O
Pin #
I
1
O
2
Function
A resistor divider from this pin to the Vout pin and ground sets the output voltage.
(Ground only for Fixed-Mode)
The output of the regulator. A minimum of 10uF capacitor (0.15Ω ≤ESR ≤20Ω)
must be connected from this pin to ground to insure stability.
The input pin of regulator. Typically a large storage capacitor (0.15Ω ≤ESR
≤20Ω) is connected from this pin to ground to insure that the input voltage does
Vin
I
3
not sag below the minimum dropout voltage during the load transient response.
This pin must always be 1.3V higher than Vout in order for the device to regulate
properly.
19
4.2 Power Board
IC901 LD7576
The LD7576X series bring high performance, combines with highly integrated functions, protections and
EMI-improve solution. It’s an ideal solution for those cost-sensitive system, reducing component count and overall
system cost.
The LD7576X series features near-lossless high voltage startup circuit, green-mode power-saving operation,
leading-edge blanking of the current sensing and internal slope compensation. They also consist with more
protections of OLP (Over Load Protection), OVP (Over Voltage Protection) and OTP (Over Temperature Protection)
to prevent the circuit damage under abnormal conditions.
The LD7576X series are available in DIP-8 and SOP-8 package.
Typical Application
20
Block Diagram
Pin
Name
Function
This pin is to program the frequency of the low frequency timer. By connecting a capacitor to
1
CT
ground to set the OLP delay time. And this pin can be used for latch mode protection. By pulling
this pin lower than 0.8 V, the controller will be entered latch mode until the AC power-on recycling.
Voltage feedback pin (same as the COMP pin in UC384X), By connecting a photo-coupler to
2
COMP
close the control loop and achieve the regulation. A high quality ceramic capacitor (X7R) is
required for general applications (102pF at least).
3
CS
Current sense pin, connect to sense the MOSFET current
4
GND
Ground
5
OUT
Gate drive output to drive the external MOSFET
6
VCC
Supply voltage pin
7
NC
Unconnected Pin
Connect this pin to positive terminal of bulk capacitor to provide the startup current for the
8
HV
controller. When Vcc voltage trips the UVLO(on), this HV loop will be off to save the power loss on
the startup circuit.
21
IC801 TA9687GN
TA 9687 is a high performance, cost-effective CCFL (Cold Cathode Fluorescent Lamp) controller designed for
driving large-size Liquid Crystal Display (LCD) applications requiring 2 to 6 CCFLs.
The controller converts unregulated DC voltages into a nearly sinusoidal lamp voltage and current waveforms.
The TA 9687 supports full-bridge power conversion topologies while maintaining high-efficiency operation. The
controller provides a soft-start operation, current and voltage regulation, overvoltage and over-current protection,
high drive capability.
The control logic provides a regulated ignition voltage and appropriate protection features for over-voltage or
over-current conditions.
The TA 9687 offers a high level of integration, while maintaining flexibility and high-efficiency operation that reduces
external component heating, resulting in higher reliability and longer CCFL life. The proprietary design technique
provides a simple, low-cost system solution.
Pin Diagram
Functional Block Diagram
22
Pin Description
Pin No.
I/O1
Names
Description
1
I
VSEN
2
I/O
SSTCMP
3
I/O
CT
Timing Resistor and Capacitor for Operation and Striking Frequency
4
I/O
RT1
Timing Resistor for Striking Frequency
5
---
GNDA
Signal Ground
6
O
PDR2
High Side Driver Output 2
7
---
GNDP
Power Ground
8
O
NDR2
Low Side Driver Output 2
9
O
NDR1
Low Side Driver Output 1
10
O
PDR1
High Side Driver Output 1
11
---
VDDA
Input Power Pin
12
I/O
TIMER
Timing Capacitor for Delay Timer
13
I
PWM
External PWM Dimming Input
14
I
ISEN
Current Sense Feedback
15
I
OVPT
Over-Voltage Protection Threshold Voltage
16
I
ENA
Voltage Sense Feedback
Capacitor for Soft-Start and Loop Compensation
IC Enable/Disable
23
5. Adjustment Procedure
5.1 White balance, Luminance adjustment
Approximately 2 Hours should be allowed for warm up before proceeding White-Balance adjustment.
Before started adjust white balance, please setting the Chroma-C7120 MEM. Channel 0 to93000K colors, MEM.
Channel 1 to 75000K colors, MEM. Channel 2 to 65000K MEM. Channel 3 to 50000K MEM. Channel 4 to sRGB
(our 9300 parameter is x=283±12, y=297±12, Y >180 cd/m2 ;7500 parameter is x=299±12, y=315±12, Y >210
cd/m2 ,6500 parameter is x =313±12, y=329±12, Y > 250cd/m2, and 5000 parameter is x = 347 ±12, y = 349 ±12, Y
>240cd/m2, sRGB parameter is x=313±12, y=329±12, Y =90±15 cd/m2)
How to setting MEM.channel you can reference to Minolta-CA210 user guide or simple use “ SC” key and “ NEXT”
key to modify x, y, Y value and use “ID” key to modify the TEXT description Following is the procedure to do
white-balance adjust
Enter into Burn/in mode:
AC ON the monitor with no signal ,and press “power” button to DC OFF the monitor, then press”1” and “power”
button at the same time to enter Burn/in mode;
Enter into the factory mode:
AC ON the monitor with signal connected, and press “power” button to DC OFF the monitor, then press”1” and
“power” button at the same time to enter factory mode;
Gain adjustment:
Move cursor to “Factory” and press “2” key.
Move cursor to “ Auto Level” and press “2” key to adjust Gain and Offset automatically;
(notice:this monitor do auto level must in T144(1280X1024@60Hz) P48(32 Grays))
a. Adjust sRGB (93000K) color-temperature
1. Switch the Chroma-C7120 to RGB-mode (with press “MODE” button)
2. Switch the MEM.channel to Channel 0 (with up or down arrow on Chroma-C7120)
3.The LCD-indicator on Minolta-CA210 will show x = 283 ±12, y = 297±12, Y >180 cd/m2
b. Adjust Color1 (75000K) color-temperature
4. Switch the Chroma-C7120 to RGB-mode (with press “MODE” button)
5. Switch the MEM.channel to Channel 1 (with up or down arrow on Chroma-C7120)
6. The LCD-indicator on Minolta-CA210 will show x = 299 ±12, y = 315 ±12,Y >210cd/m2
c. Adjust Color2 (65000K) color-temperature
7. Switch the Chroma-C7120 to RGB-mode (with press “MODE” button)
8. Switch the MEM.channel to Channel 2 (with up or down arrow on Chroma-C7120)
9. The LCD-indicator on Minolta-CA210 will show x = 313 ±12, y = 329 ±12,Y >250 cd/m2
d. Adjust sRGB (50000K) color-temperature
1. Switch the Chroma-C71200 to RGB-mode (with press “MODE” button)
2. Switch the MEM.channel to Channel 3 (with up or down arrow on Chroma-C7120)
3.The LCD-indicator on Minolta-CA210 will show x = 347 ±12, y = 360 ±12, Y >240 cd/m2
24
e. Adjust sRGB (sRGB) color-temperature
1. Switch the Chroma-C7120 to RGB-mode (with press “MODE” button)
2. Switch the MEM.channel to Channel 4 (with up or down arrow on Chroma-C7120)
3.The LCD-indicator on Minolta-CA210 will show x = 313 ±12, y = 329 ±12, Y = 80 ±15 cd/m2
10. press “1” key to save adjust value and exit .
Turn the POWER-button off to on to quit from factory mode, and reset the monitor.
Max Brightness measurement: >250 cd/m2
Test conditions:
a. Switch to the full white pattern, in user mode main menu:
1. Set <Color Settings> Red, Green, and Blue to the max.
2. Set <Brightness> Brightness, Contrast to the max.
5.2 Firmware Upgrade Procedure
5.2.1 Equipment needed:
-
VG2427wm
-
PC (Personal computer)
-
LPT cable
-
Firmware upgrade program
ISP Board
25
LPT Cable
VGA Cable
Hardware Connect status
5.2.2 Update the NOVATEK’S firmware
You should jump the pin to “For Flash” at ISP Board
Connect to the
PC LPT
Connect to the VSC
VA2427wm
26
Double click “Writer.exe”
This tool can auto detect the right SCALAR programe speed,the process as follow:
27
When auto detect is finished,click “Load Hex”,then chosse the firmware that you want to update
Click “Auto”,then the update will begin.Wait for a moment until the bar is 100%,the program windows will show
“Programing Success”.This means the update is successful.
28
5.3 DDC Key in Procedure
Note:
1. Every time after replacing the main board, you have to do the DDC key in.
2. If you find the DDC does not conform to the LCD TV, you have to do the DDC key in.
5.3.1 Equipment Needed
-
VG2427wm
-
PC (Personal computer)
-
LPT cable
-
12V DC
-
Firmware upgrade program
-
DDC Card
5.3.2 Install software
You must install the
at the first.
Note: After installation, you must restart the PC to take the setup to effect.
5.3.3 Connect the DDC board as follow:
Connect to the
PC LPT
Connect this port to the
VSC VG2427wm’s VGA
12V Input
29
For analog
a. Double-click
b. Click
,appear as follow Figs:
.
c. Key in the Serial Number printed on the barcode label, then click “OK”
30
R3V080100001
12 codes,
for example.
d. Unit appears the following Fig, writer completed.
31
6. Troubleshooting Flow Chart
32
7. Block Diagram
7.1 Main Board
LCD Interface
(CN302)
EEPROM
Scalar IC NT68667
PM25LV020-100SCE
(Include MCU, ADC, OSD)
(U402)
(U401)
Crystal
12MHz
(X401)
DVI_SCL
DVI_SDA
DVI_SCL
DVI_SDA
Key Control
interface
(CN404)
EEPROM
EEPROM
M24C02
M24C02
(U108)
(U102)
H sync
V sync
D-DATA
RGB
D-CLK
D-Sub
DVI
Connector
Connector
(CN101)
(CN102)
33
7.2 Power Board
AC input
Bridge
Rectifier
and Filter
EMI filter
Transformer
Rectifier
diodes
Start Circuit: R904, R905,R906
CN902
Feedback
Circuit
PWM Control
IC LD7576
5V
16V
ON/OFF
Output
Circuit
Lamp
Transformer
MOSFET
ON/OFF
Control
Feedback
Circuit
PWM Control
DIM
Over Voltage
34
8. Schematic Diagrams
8.1 Main Board
FB102
R102: 100 Ohm->0 Ohm
R102
0R05 1/10W 5%
H_Sy nc
V_Sy nc
VGA_B+
R103 100R 1/16W 5%
DSUB_H 5
R104
DSUB_V 5
100R 1/16W 5%
5VCC
R106
2K2 1/16W 5%
R107
2K2 1/16W 5%
C103
22pF
5V_ESD
DSUB_SDA
NC
R101
100R 1/16W 5%
14
13
DSUB_SDA 12
5 DDC1_SDA
11
17
R113
100R 1/16W 5%
ADD R145
LG
20081029
100R 1/16W 5%
C102
0.047uF
DSUB_B+ 5
R109
100R 1/16W 5%
C106
0.047uF
DSUB_B- 5
R110
470R 1/16W 5%
C107
1000pF
DSUB_SOG 5
R111
100R 1/16W 5%
C108
0.047uF
DSUB_G+ 5
R114
100R 1/16W 5%
C110
0.047uF
DSUB_G- 5
R115
100R 1/16W 5%
C111
0.047uF
DSUB_R+ 5
C114
0.047uF
DSUB_R- 5
C105
5pF/50V
75R 1/16W 5%
I/O4 I/O1
VDDGND
I/O3 I/O2
H_Sy nc
1
2
3
FB103
V_Sy nc
VGA_G+
1
BEAD
2
C112 AZC199-04S
NC
VGA_PLUG
DSUB_5V
R112
C109
5pF/50V
75R 1/16W 5%
VGA_BVGA_B+
VGA_GVGA_G+
VGA_RVGA_R+
VGA_GZD104
RLZ5.6B
U103
VGA_R+
VGA_G+
DB15
R105
R108
DSUB_5V
DSUB_SCL 15
5 DDC1_SCL
2
U104
6
5
4
DSUB_SCL
CN101
10
5
9
4
8
3
7
2
6
1
BEAD
VGA_B-
C104
22pF
R144
R143
16
NC
1
ADD R146
LG
20081029
3
2
1
I/O2 I/O3
GNDVDD
I/O1 I/O4
VGA_B+
4
5
6
5V_ESD
FB101
VGA_R+
C101
NC
AZC199-04S
1
BEAD
2
R116
C113
5pF/50V
75R 1/16W 5%
5 VGA_DET
R139
1K 1/16W 5%
VGA_R-
R141
1K 1/16W 5%
R117
100R 1/16W 5%
DVI_DET 5
1/3shield
2/4shield
0/5shield
clk shield
GND
GND
DAT0+
DAT0DAT1+
DAT1DAT2+
DAT2DAT3+
DAT3DAT4+
DAT4DAT5+
DAT5clk+
clk-
DVI_SCL
DVI_SDA
R120 1K 1/16W 5%
R118 100R 1/16W 5%
R119 100R 1/16W 5%
DVI_5V
DDC2_SCL
DDC2_SDA
DDC2_SCL 5
DDC2_SDA 5
DSUB_5V 5VCC
R133
NC
C115
11
3
19
22
0.1UF 16V
R140
NC
R126
R127
R128
R129
R130
R131
18
17
10
9
2
1
13
12
5
4
21
20
23
24
10R
10R
10R
10R
10R
10R
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
5%RX0P
5%RX0N
5%RX1P
5%RX1N
5%RX2P
5%RX2N
RX0P
RX0N
RX1P
RX1N
RX2P
RX2N
HDCP_CTRL 5
Q101
NC
5
5
5
5
5
5
10R 1/16W 5%RXCP
10R 1/16W 5%RXCN
D103
BAV70
R135
NC
R148
4K7 1/16W 5%
R149
4K7 1/16W 5%
R150
R147
U108
8
7
6
5
100R 1/16W 5%
100R 1/16W 5%
5 DDC_WP
RXCP 5
RXCN 5
ADD
20081225
C121
0.22uF16V
R151
4K7 1/16W 5%
DSUB_SCL
DSUB_SDA
R132
R134
1
DVI_HPD
VCC A0
WP
A1
SCL A2
SDA VSS
1
2
3
4
M24C02-WMN6TP
ESD_5V
26
25
U107
C120
NC
4
5
6
I/O3 I/O2
VDDGND
I/O4 I/O1
AZC199-04S
候綼 U1 07
3
2
1
1
2
3
U105
AZC199-04S
I/O1 I/O4
GNDVDD
I/O2 I/O3
ESD_5V
6
5
4
1
2
3
U106
AZC199-04S
I/O1 I/O4
GNDVDD
I/O2 I/O3
ESD_5V
6
5
4
C118
C119
NC
NC
ADD D101
LG
20081029
DVI_5V 5VCC
ESD_5V
1
2
FB105
ADD D102
LG
20081029
D102
BAV70
R137
4K7 1/16W 5%
DVI_SCL
DVI_SDA
5 DDC_WP
R136
4K7 1/16W 5%
R138
4K7 1/16W 5%
R121
100R 1/16W 5%
R122
100R 1/16W 5%
8
7
6
5
5VCC
5V_ESD
GND POWER DGND
1
R142
0 OHM +-5% 1/16W
2
120 OHM
1K CHANGE TO 0R
LG
20081029
3
JACK
DVI_5V
8
15
6
7
14
16
2
VSY NC
SY NC GND
DDC SCL
DDC SDA
+5V
HPD
3
CN102
C117
0.22uF16V
U102
1
VCC A0 2
WP
A1 3
SCL A2 4
SDA VSS
M24C02-WMN6TP
Add 24C02 f or DVI-EDID
OEM MODEL . VSC VG2427
Size
絬 隔 瓜絪 腹
G3226-1-X-X-6-090317
TPV MODEL
Rev
Key Component
2. INPUT
PCB NAME
T P V ( Top
Date
35
Victory
Electronics
Tuesday , March 17, 2009
Co . ,
Ltd. )
Sheet
<Doc>
2
of
6
称爹
Custom
1
<称爹>
CN302
RXO0+
RXO1+
RXO2+
RXOC+
RXO3+
RXE0+
RXE1+
RXE2+
RXEC+
RXE3+
FB301
1
2
+ C305
120 OHM
+5V
5 T5M
5 T5P
5
6
7
8
R305
R306
Q301
D
D
D
D
PANEL_VCC
R307
2N3904S-RTK/PS
R303
22K 1/16W 5%
4K7 1/16W 5%
+5V
LVB0M
LVB0P
LVB1M
LVB1P
LVB2M
LVB2P
RXO0RXO0+
RXO1RXO1+
RXO2RXO2+
LVBCKM
LVBCKP
LVB3M
LVB3P
LVA0M
LVA0P
RXOCRXOC+
RXO3RXO3+
RXE0RXE0+
LVA1M
LVA1P
RXE1RXE1+
LVA2M
LVA2P
LVACKM
LVACKP
LVA3M
LVA3P
RXE2RXE2+
RXECRXEC+
RXE3RXE3+
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
4
3
2
1
Q302
NC/AO4411
C302
R304
5 T6M
5 T6P
5 TCLK2M
5 TCLK2P
5 T7M
5 T7P
U301
G
S
S
S
AO3401
56K 1/16W 5%
5 PPWR_ON#
T0M
T0P
T1M
T1P
T2M
T2P
5 TCLK1M
5 TCLK1P
5 T3M
5 T3P
5 T4M
5 T4P
100UF25V
10K 1/16W 5%
0.22uF16V
NC
PANEL_VCC
C304
0.1UF 16V
3D
1
G
C303
1uF/16V
R308
10K 1/16W 5%
2
S
R301
R302
C301
220 OHM 1/4W
220 OHM 1/4W
0.1UF 16V
NC/CONN
AO3401L
CN403
VCC3.3
R443
NC/CONN
KEY 1 5
KEY 2 5
R438
1K 1/16W 1%
POWER_KEY # 5
KEY 1
LED_GRN/BLUE 5
KEY2
POWER_KEY #
LED_GRN/BLUE
LED_ORANGE
ZD401
UDZSNP5.6B
2
C435
ZD402
UDZSNP5.6B
ZD403
UDZSNP5.6B
1
C434
2
C433
1
CONN
LED_LF_BLUE 5
C432
2
C431
1
R439
1K 1/16W 1%
LED_ORANGE 5
0.1UF 16V
1
2
3
4
5
6
R445
0.1UF 16V
CN404
R444
3.9K OHM 1/16W
NC
NC
3.9K OHM 1/16W
R437
R436
3.9K OHM 1/16W
1
2
3
4
5
6
7
8
0.1UF 16V
CONN
5
5
5
5
5
5
PANEL_VCC
LVB0P
LVB1P
LVB2P
LVBCKP
LVB3P
LVA0P
LVA1P
LVA2P
LVACKP
LVA3P
0.1UF 16V
RXO0RXO1RXO2RXOCRXO3RXE0RXE1RXE2RXECRXE3-
CN301
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0.1UF 16V
LVB0M
LVB1M
LVB2M
LVBCKM
LVB3M
LVA0M
LVA1M
LVA2M
LVACKM
LVA3M
29
27
25
23
21
19
17
15
13
11
9
7
5
3
1
CN402
7
6
5
4
3
2
1
NC/CONN
VCC3.3
CN405
NC/CONN
1
2
3
4
5
6
7
FB402
NC
TOUCH_POWER
LED_LF_BLUE
C436
OEM MODEL . VSC VG2427
Size
絬隔瓜絪腹
G3226-1-X-X-6-090317
TPV MODEL
Rev
Key Component
3. OUTPUT
PCB NAME
T P V ( Top
NC
Date
36
Victory
Electronics
Tuesday , March 17, 2009
Co . ,
Ltd. )
Sheet
<Doc>
3
of
6
称爹
Custom
1
<称爹>
5VCC
CN701
5VCC
R701
NC/10K 1/16W 5%
BKLT-VBRI
BKLT-EN
R710
R703
R707
C703
C701
C712
NC/0.1UF 16V
NC/1uF/16V NC
U704
AP1117E18LA
3
C710
NC/1N 50V
VI
VO
1
lock type
PANEL_ID# 5
Volume# 5
Mute 5
GND
CONN
NC
0R05 1/16W
0R05 1/16W
U702
NC/AIC1117A-18PE
TO252
3
Vin
Vout
VCC1.8
2
ADJ
VCC3.3
SOT223
2
4
+5V
+5V
+5V
4
9
8
7
6
5
4
3
2
1
C711
1K 1/16W 5%
NC/0.1UF 16V
BKLT-VBRI
+
NC/0.1UF 16V 100UF25V
1
R705
C704
C705
adj_BACKLIGHT 5
R706
100R 1/16W 5%
5VCC
VCC3.3
VCC3.3
U701
5VCC
BKLT-EN
R708
10K 1/16W 5%
3
VIN
VOUT
2
VSS
1K 1/16W 5%
R711
NC
C706
NC/100UF25V
R704
C709
NC/AP1117E33LA
+
1
R702
C702
0.1UF 16V
5VCC
C708
0.1UF 16V
0.1UF 16V
C707
+
100UF25V
U703
20081210:
us e Pin 123 control BL_ON [on_BACKLIGHT_1]:
R446: 0 Ohm ; R708: 10K; R704: 22K;R702:1K; Q701:2N3904;C702:0.1uF
R447, R711: NC
3
2
1
on_BACKLIGHT_5v _1 5
VIN
VOUT
ADJ(GND)
on_BACKLIGHT_1 5
Q701
22K 1/16W 5%
2N3904S-RTK/PS
ADD R711
LG
20081029
AP1117D33L-13
us e Pin 39 control BL_ON [on_BACKLIGHT_5V_1]:
R447: 0 Ohm ; R711: 10K
R446,R708,R704,R702,Q701,C702: NC
T P V ( Top
Electronics
Co . ,
Ltd. )
OEM MODEL . VSC VG2427
Size
Rev
絬隔瓜絪腹
G3226-1-X-X-6-090317
TPV MODEL
Key Component
4. POWER
PCB NAME
Date
37
Victory
Tuesday , March 17, 2009
Sheet
<Doc>
4
of
6
称爹
B
1
<称爹>
DVDD
FB403
300OHM
VCC1.8
WP
C448
1uF 16V
C0603
C406
C407
C442
0.1UF 16V
0.1UF 16V
0.1UF 16V
C439
1uF 16V
2
2
2
2
2
2
2
2
C447
0.1UF 16V
4
5
7
8
10
11
13
14
RX2P
RX2N
RX1P
RX1N
RX0P
RX0N
RXCP
RXCN
41
42
2 DSUB_H
2 DSUB_V
19
20
2 DSUB_B+
2 DSUB_B-
21
22
23
2 DSUB_SOG
2 DSUB_G+
2 DSUB_G-
24
25
2 DSUB_R+
2 DSUB_R-
REXT
RX2+
RX2RX1+
RX1RX0+
RX0RXC+
RXC-
5V_DET
3 KEY 1
3 KEY 2
C446 0.1UF 16V
R415
R416
SPI_CE
SPI_SO
SPI_SI
SPI_CK
WP
MSDA
MSCL
TX
R431
R429
R412
R454
4 MUTE
DVDD
30
33
125
126
104
105
106
107
108
48
29
2 VGA_DET
2 DVI_DET
49
NC
50
NC
NC/100R 1/16W 5%31
32
100R 1/16W 5%
1
C422
0.1UF 16V
X401
2
R405
10K 1/16W 5%
C420
22pF
1
TP
TP1
0R05 1/16W
0R05 1/16W
12MHz
C421
22pF
127
BUZZER
PM25LV020-100SCE
U403
8
7
6
5
EE_WP
MSCL
MSDA
VCC NC
WC NC
SCL NC
SDA VSS
1
2
3
4
17
HSY NCI1
VSY NCI1
BIN1+
BIN1SOG1I
GIN1+
GIN1RIN1+
RIN1-
PB7/DDC_SDA1*
PB6/DDC_SCL1*
PB5/DVI_SDA0*
PB4/DVI_SCL0*
RSRA3M/T4M/RSRB0M
RSRA3P/T4P/RSRB0P
RSRA2M/T5M/GSGB0M
RSRA2P/T5P/RSGB0P
RSRA1M/T6M/RSGB0M
RSRA1P/T6P/RSBB0P
RSGA3M/TCLK2M
RSGA3P/TCLK2P
RSGA2M/T7M
RSGA2P/T7P
DGND/CGND
RSGA1P/VCKI
NT68667UFG/C
RSCLKAM/V7
RSCLKAP/V6
RSBA3M/V5
RSBA3P/V4
RSBA2M/V3
RSBA2P/V2
RSBA1M/V1
RSBA1P/V0
PB3/ADC3/INTE1
PB2/ADC2/INTE0
PB1/ADC1
PB0/ADC0
DGND/CGND
NC
GPO2/AD0
GPO3/AD1
INT_VSO/GPO4
INT_HSO/GPO5
NC
PWMA*/GPO7
PWMB*/GPO8
SPI_CE
SPI_SO
SPI_SI
SPI_CLK
PD4
PD5
PD6
PC7
PC6
PC5
PC4/PWM1
PC3/PWM0
PC2
PC1*
PC0*
P35
P34
P31/TXD
P30/RXD
RSTB
PA7/PWM9*
PA6/PWM8*
PA5/PWM7*
PA4/PWM6*
PA3/PWM5
PA1/PWM3
PA2/PWM4
PA0/PWM2
OSCI
R462
1M 1/16W 5%
128
OSCO
1
2
3
R476 NC
R475
NC/2K2 1/16W 5%
51
53
90
2
DGND/CGND
DGND/CGND
DGND/CGND
DGND/CGND
DGND/CGND
DGND/CGND
DGND/CGND
DGND/CGND
DGND/CGND
DGND/CGND
RSGB1M/T0M
RSGB1P/T0P
RSCLKBM/T1M
RSCLKBP/T1P
RSBB3M/T2M
RSBB3P/T2P
RSBB2M/TCLK1M
RSBB2P/TCLK1P
RSBB1M/T3M
RSBB1P/T3P
GND
DGND
GND
DGND/CGND
DGND/CGND
DGND/CGND
PGND
AGND
AGND
ADC_GNDA
34
35
46
47
DDC1_SDA
DDC1_SCL
DDC2_SDA
DDC2_SCL
KEY 1
KEY 2
SPI_CK
SPI_SI
C411
NC/0.22uF16V
R441
NC/4K7 1/16W 5%
100
99
98
97
96
95
94
93
92
91
88
87
86
85
84
83
82
81
80
79
40
39
38
37
36
67
66
65
Q403
NC/2N3906S-RTK/PS
LED_LF_BLUE 3
R478
NC/100R 1/10W 5%
T0M 3
T0P 3
T1M 3
T1P 3
T2M 3
T2P 3
TCLK1M 3
TCLK1P 3
T3M 3
T3P 3
0R05 1/16W
R466
R465
3K3 1/16W 5%
LED_C
T4M 3
T4P 3
T5M 3
T5P 3
T6M 3
T6P 3
TCLK2M 3
TCLK2P 3
T7M 3
T7P 3
+5V
VCC3.3
R467
NC/0R05 1/16W
Q401
2N3906S-RTK/PS
LED_ORANGE
LED_ORANGE 3
R468
100R 1/10W 5%
1K 1/16W 1%
R470
R469
2K2 1/16W 5%
61
60
59
58
57
56
55
54
103
102
124
123
122
28
121
120
NC/0R05 1/16W
LED_LF_BLUE
77
76
75
74
73
72
71
70
69
68
63
62
89
110
111
112
113
114
116
117
118
VCC3.3
R477
LED_A
+5V
+5V
VCC3.3
R471
LED_B
NC/0R05 1/16W
Q402
2N3906S-RTK/PS
LED_GRN/BLUE
LED_GRN/BLUE 3
R472
100R 1/10W 5%
R418
R417
R404
R425
R402
VSO
HSO
120R 1/16W 5%
100R 1/16W 5%
adj_BACKLIGHT 4
Volume#
4
100R 1/16W 5%
VSO
HSO
1K 1/16W 5%
POWER_KEY #
POWER_KEY # 3
on_BACKLIGHT
R446
0R05 1/16W
PANEL_ID# 4
EE_WP
NC
on_BACKLIGHT_1 4
DDC_WP 2
HDCP_CTRL 2
R421
R406
R419
R420
NC/10K 1/16W 5% BUZZER
NC/10K 1/16W 5%
22K 1/16W 5%
10K 1/16W 5%
on_BACKLIGHT_5v
on_BACKLIGHT_5v _1 4
R447 NC/0R05 1/16W
LED_A
LED_C
LED_B
ADD R446,447
LG
20081030
PPWR_ON# 3
44
3
109
64
78
101
18
12
9
27
R407
20K OHM 1/16W
2
2
2
2
CE# VDD
SO HOLD#
WP# SCK
GND
SI
R440
NC/4K7 1/16W 5%
8
7
6
5
NC/CONN
6
15
U401
PVCC
ADC_VAA
+5V
R403
10K 1/16W 5%
1
2
3
4
CN406
+5V
DVDD
DVDD
DVDD
DVDD
0402
ADC_VAA
R401
470 OHM +-1% 1/16W
16
DVDD
PVCC
AVCC
43
0.1UF 16V
PLL_GND
C423
0.1UF 16V
45
C430
0.1UF 16V
PLL_VDD
C412
AVCC
CVDD
C413
0.1UF 16V
0.1UF 16V
100R 1/16W 5%
R413
10K 1/16W 5%
AVCC
AVCC
C438
1uF/16V
C410
R409
U402
SPI_CE
SPI_SO
NC/M24C16
26
C404
1uF 16V
C0603
DVDD
FB407
300 OHM
R414
NC
PVCC
ADC_VAA
FB404
300 OHM
C403
1uF 16V
C0603
C401
0.22uF16V
CVDD
52
115
119
AVCC
C440
4.7UF 10V
C0805
VCC3.3
FB406
300OHM
CVDD
CVDD
CVDD
FB401
300 OHM
DVDD
OEM MODEL . VSC VG2427
Size
絬隔瓜絪腹
G3226-1-X-X-6-090317
TPV MODEL
Rev
Key Component
5. SCALER
PCB NAME
T P V ( Top
Date
38
Victory
Electronics
Tuesday , March 17, 2009
Co . ,
Ltd. )
Sheet
<Doc>
5
of
6
称爹
Custom
1
<称爹>
8.2 Power Board
L904
100 OHM 1/4W
R918
+
100 OHM 1/4W
R920
!
FB902 80OHM
R904
8.2K OHM 1/4W
C938
1500PF2KV
NC
R905
8.2K OHM 1/4W
C904
!
0.1uF C907
IC901
1
2
3
4
!
!
C940
0.047uF
CT
HV
COMPNC
CS VCC
GND OUT
D903
8
7
6
5
6
1
9
10
3
12
11
D900
FR107
Q901
STP10NK70ZFP
IN4148
R910
!
NC
!
C903
R938
10K 1/8W 5%
R912
220 OHM 1/4W
R901
1M 1/4W 5%
1M 1/4W 5%
NR901
NTCR
C921
1000pF 250V
bom change
2008-08-20
!
!
2
+5V
FUSE
R924
100R 1/8W 5%
C915
470uF/16V
C939
1000uF/25V
+
R940
NC
R925
1K 1/8W 5%
R927
FB901
BEAD
10K 1/10W 1%
R949 100 OHM 1/4W
C935
0.001uF
R951 100 OHM 1/4W
R926
1K 1/10W 1%
3
IC904
KIA431A-AT/P
1
D908
SP1060
R930
9K1 1/10W 1%
CHANGE
JUMP WIRE
CN903
1
2
3
4
+16V
!
L905
REV:B ADD
CN903(USB 称ノ)
1
+5V
DIM
ON/OFF
PID
C931
0.1uF
GND1
GND
HS3
HEAT SINK(D906)
1
2
HS2
HEAT SINK(D908)
1
2
HS1
HEAT SINK(Q901)
1
2
F902
CN902
CONN
1
2
F903
2.2uH
CN901
SOCKET
1
2
R939
1K 1/8W 5%
L906
NC
GND2
GND
0.001uF
F901
FUSE
C901
1000pF
3
C902
1000pF
!
C932
Coil
C900
3300pF 250V
C928
0.01uF
R943
470R 1/8W 5%
100OHM 2W
L903
+
R950 100 OHM 1/4W
0.39 OHM 2W +-5%
C909
220pF
Q903
KTD1028
R946
C929
R962 100 OHM 1/4W 0.001uF
C924
0.1uF
R914
680uF25V
D907
31DQ06FC3
0.22UF275V
R902
ZD902
TZX18B
C918
R961 100 OHM 1/4W
IC903
PC123X2Y FZOF
C937
100pF/2KV
+
R935 100 OHM 1/4W
R909
3.3 OHM 1/4W
10R 1/4W 5%
LD7576
8
7
2
4
1
C908
22uF 50V
+
L901
27mH
5
100K OMH 2W +-5%
D901
FR103
3
2
0.22UF275V
R903
C906
1500PF2KV
4
!
4
1
+
2
+
C905
67G315Z12115K
120uF450V
2
T901
POWER X'FMR
C917
680uF25V
1
4
1
D906
FMX-12SL
3
1
2
3
3
2
BD901
!GBU408
+16V
Coil
C912
0.001uF
2
1
100 OHM 1/4W
R919
Coil
1
2
3
4
5
6
7
8
9
10
11
12
13
+
C930
0.1uF
+
C916
1000uF/25V
+5V1
FUSE
C934
NC
CONN
VOL
MUTE
T P V ( Top
+5V1
Electronics
Co . ,
Ltd. )
OEM MODEL
絬隔瓜絪腹
TPV MODEL
Key Component
03.POWER
PCB NAME
Date
39
Victory
G2824-C-5-X-3-081111
Saturday , Nov ember 15, 2008
Sheet
Size
VSC
Rev
715G2824-C-5
3
of
4
称爹
Custom
C
ODM MODEL
R817 4R7 1/8W
+16V
Q805
2
2
ZD803
RLZ5.6B
+5V
R816
4R7 1/8W
R804
5K1 1/8W 5%
1
1
R803
5K1 1/8W 5%
4
3
2
1
R802
22R 1/8W 5%
R805
NC
C801
0.047uF
5
6
7
8
2
1
Q806
R818
4R7 1/8W
4
3
2
1
C811
0.1uF
G1
S1
G2
S2
D1
D1
D2
D2
CN801
PT801
6 POWER X'FMR
7
5
C815
0.1uF
R819
4R7 1/8W
C802
0.047uF
D1
D1
D2
D2
AO4620
DIM
PID
G1
S1
G2
S2
C819
56pF3KV
8
LV1
5
6
7
8
LV2
1
CONN
2
C818
R806
100K 1/10W 1%
1.5UF/10V
R815 R808
NC
390R 1/10W 1%
C812 C806
NC
2.2uF/16V
C805
0.022uF
D801
R828
100K 1/10W 1%
2
L
IN4148
C813
NC
Fop=9.53/R811*C809
Q802
C809
220pF
2N7002 SOT-23
C810
0.0033uF
C817
2PF6KV
6.2M OHM 1W
R810
IC801 ta9687GN-A-0-TR
R813
R809
100K 1/10W 5%
1M 1/10W 5%
1L
1000uF 25V
R811
82K1/10W
C814
220pF
R830
D806 BAV70
1
6K8 1/8W 5%
L802
3
4
LV4
3
CN803
C821
56pF3KV
2
1
LV3
R836
56K 1/10W 5%
CN804
CONN
C822
56pF3KV
R837
2
1
3
C808
33NF50V
D807 BAV70
1
R838 1M 1/10W 5%
LV1
3
R839 1M 1/10W 5%
LV2
2
D808 BAV70
1
D803
BAV99
R840 1M 1/10W 5%
LV3
3
R841 1M 1/10W 5%
2
LV4
R844
10K 1/10W 5%
R843
10K 1/10W 5%
R842
10K 1/10W 5%
T P V ( Top
Victory
Electronics
R845
10K 1/10W 5%
Co . ,
Ltd. )
OEM MODEL
絬隔瓜絪腹
G2824-C-5-X-3-081111
TPV MODEL
Key Component
02.INVERTER
PCB NAME
Date
40
CONN
6K8 1/10W 5%
2
3
R812
100K 1/10W 1%
NDR1
NDR2
PDR1
GNDP
VDDA
PDR2
TIMER
GNDA
PWM
RT1
ISEN
CT
OVPT SSTCMP
ENA
VSEN
8
7
6
5
4
3
2
1
4
1
9
10
11
12
13
14
15
16
L801
2
1
AO4620
C804
R807
10K 1/10W 5%
CN802
CONN
C820
56pF3KV
+
R801
10K 1/10W 5%
2
1
2
ZD802
RLZ5.6B
ON/OFF
Saturday , Nov ember 15, 2008
Sheet
Size
VSC
Rev
715G2824-C-5
2
of
4
称爹
Custom
F
ODM MODEL
+5V1
C609
1uF/25V
Lin
R604
10K 1/10W 5%
C606 0.47uF/16V
100uF/25V
FB602
2
9
10
11
12
13
14
15
16
CN602
LOUT+
LOUT-
4
3
2
1
ROUTROUT+
CONN
C608
1uF/25V
R601
10K 1/10W 5%
Q607
MMBT3906
MUTE
Q608
MMBT3904
BEAD
C612
0.1uF/16V
R610
10K 1/10W 5%
C613
+
IN4148
LOUTVDD
LOUT+
GND
GND
ROUT+
VDD
ROUT-
R611
56K 1/10W 5%
R612
10R 1/10W 5%
D601
SE/BTL
VOLUME
LINGND
GND
RINBY PASS
SHUTDOWN
APA2069JITUL
+5V1
6.2KOHM +-5% 1/10W
R607
100pF
C611
R606
6.2KOHM +-5% 1/10W
R608
0R05 1/8W
10K 1/10W 5%
100pF
R605
PHONEJACK
1
IC601
8
7
6
5
4
3
2
1
C601 0.47uF/16V
Rin
C610
4
5
3
2
1
C604
100uF/25V
10K 1/10W 5%
R609
CN601
0.47uF/16V
R603
10K 1/10W 5%
C603
VOL
+
0.47uF/16V
R602
10K 1/10W 5%
C602
+5V1
HS4
HEAT SINK(IC601)
C614
0.1uF/16V
R613
1K 1/10W 5%
1
2
IC with Heat-sink(90G6295-3)
T P V ( Top
Victory
Electronics
Co . ,
Ltd. )
絬隔瓜絪腹
G2824-C-5-X-3-081111
TPV MODEL
Key Component
04.AUDIO
PCB NAME
Date
Saturday , Nov ember 15, 2008
41
VSC
OEM MODEL
Sheet
Size
Rev
715G2824-C-5
4
of
4
称爹
Custom
C
ODM MODEL
8.3 Key Board
KEY 1
R001
3K 1/10W 1%
UP
KEY 2
R002
3K 1/10W 1%
DOWN
POWER
Y ELLOW
BLUE
R003
2K OHM 1% 1/10W
R004
2K OHM 1% 1/10W
1
3
5
7
9
SW01
3
4
LED001
SW
4
6
8
10
1
C002
0.1uF 16V2
2
C001
0.1uF 16V
LED
KEY1 POWER
KEY2 DOWN
UP
CN001
GND
GND
D102
UDZSNP5.6B
CABLE
KEY 1
KEY 2
POWER
BLUE
Y ELLOW
D101
UDZSNP5.6B
1
2
3
4
5
6
GND
T P V ( Top
Victory
Electronics
Co . ,
Ltd. )
OEM MODEL VA2413W
Size
A
Rev
C
称爹
<称爹>
絬隔瓜絪腹
G3265-E-X-X-1-080927
TPV MODEL
Key Component
1. Key board
PCB NAME
Date
Saturday , September 27, 2008
42
Sheet
715G3265-E
2
of
2
8.3 USB Board
VBUS0
VBUS0
2
U702
26
Common
RESET
RBIAS
GND_U
R721
12K 1/10W 1%
LOCAL_PWR/NON_REM0/SUSP_IND
VDD33
11
C708
27pF 50V
VDD33CR
TEST
33
VDDA33
VDDA33
VDDA33
VDDA33/VDD33PLL
XTAL1/CLKIN
23
GND_U
C706
10nF16V
5
10
29
36
2
24.000MHz
VDD18
32
C707
0.1uF/16V
1
2
3
4
GND_U
t
37
VSS(FLAG)
VDDA18PLL
/OCS2
+
2
R732
GND_U
2
ZD706
L705 NC
2
1
DP4
3
4
R733
t
2
C716
100uF/16V
R752
2
4
3
2
1
9
ZD710
GND_U
GND_U
2
C727
NC/100uF/16V
C728
NC/0.1uF/16V
R735
NC/15K 1/16W 5%
GND_U
GND_U
GND_U
VBUS0
R755
1
2
NC
+
C729
NC/100uF 25V
GND_U
12V to 5V
R751
NC/100K 1/16W 5%
C719
4.7uF/10V
CONN
11
10
0R05 1/4W 5%
USB_POWER
CN704
C718
0.1uF/16V
1
+
/OCS4
GND_U
NC/CONNNECTOR
12
C745
10uF/6.3V
C715
4.7uF/10V
GND_U
ZD709
CN703
F704
NC/PTCRFB704NC/120 OHM
R734
NC/10K 1/16W 5%
C717
0.1uF/16V
GND_U
NC/0R05 1/16W
USB5V
GND_U
ZD708
NC/0R05 1/16W
DM4
FB702120 OHM
1
R726
15K 1/16W 5%
GND_U
34
GND_U
F702
PTCR
9
GND_U
C714
0.1uF/16V
XTAL2/CLKIN_EN
ZD705
0R05 1/16W
USB5V
NC
10
GND_U
14
27pF 50V
4
R725
10K 1/16W 5%
C709
C710
C711
C724
C712
0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V
1
X701
GND_U
A0
A1
A2
GND
GND_U
15
R724
1M 1/16W 5%
C713
VCC
WP
SCL
SDA
+3.3V_USB
28
R716
100K 1/16W 5%
R718
R719
R720
GND_U
100K 1/16W
100K
5%1/16W
100K
5%1/16W 5%
C704
NC
35
C705
0.1uF/16V
R769
NC
8
7
6
5
3
1
R727
SDA/SMBDATA/NON_REM1
SCL/SMBCLK/CFG_SEL0
HS_IND/CFG_SEL1
22
24
25
1
R723
11
0R05 1/16W
L703 NC
2
2
+3.3V_USB
C733
NC/0.1uF
R750
NC/3.6K OHM 1% 1/10W
GND_U
U704
1
2
3
4
C736
NC/0.1uF/16V
USB5V
8
7
6
5
FB
VSS
EN
VSS
OCSET OUTPUT
VCC OUTPUT
D701
L706
NC/150uH +-15%
NC/AP1510SA
R766
NC/1K 1/16W 5%
R753
NC/11.5K OHM 1/16W 1%
+ C742
100uF 25V
GND_U
NC/2.2K 1%
R754
NC/SSM54PT
C744
NC/0.1uF/16V
GND_U
Near by
U706
FB705
1
NC
USB5V
+3.3V_USB
FB706
U705
VIN
VOUT
C747
+
0.1uF/16V
AP1117E33LA
1
C746
100uF25V
TRACE 5 M ILES,VERY THIN
R767
NC
5
VBUS0
1
2
2
120 OHM
VSS
3
GND_U
Hub side
C748
+
Q701
NC
R768
NC
IN
OUT
ON/OFF
FB
2
4
IF U704NC , CONNECT U706
R767: 100K,R768: 68K,Q701: 3904, R753: 12K , R754: 3.9K
GND
USB5V
USB 2504
3
GND_U
DP2
EEPROM/Config
R717
100K 1/16W 5%
DM2
20
R714
+3.3V_USB
R722
+3.3V_USB
CONNNECTOR
12
GND_U
EGA10603V05A1-B
1
PRTPWR4
DP4
NC
USBDN4_DP
DM4
NC
OCS4
8
9
R713
21
NC
USBDN4_DM
/OCS4
CN702
8
7
6
5
Dow nstream 4
ZD707
NC/0R05 1/16W
8
7
6
5
18
R731
1
0R05 1/16W
4
ZD704
NC/EGA10603V05A1-B
R715
ZD703
3
2
4
1
DP3
2
PRTPWR3
DP3
3
DM3
1
USBDN3_DP
DM3
1
NC/EGA10603V05A1-B
OCS3
6
7
L702 NC
2
NC/0R05 1/16W
L704 NC
2
1
USBDN3_DM
R730
0R05 1/16W
NC/EGA10603V05A1-B
DP1
Dow nstream 3
19
1
1
5
6
R712
16
DM1
/OCS3
GND_U
GND_U
2
DP2
1
DM2
2
PRTPWR2
3
4
GND_U
4
3
2
1
USBDN2_DP
2
OCS2
C726
N/0.1uF/16V
R729
NC/15K 1/16W 5%
GND_U
GND_U
1
17
R709
15K 1/16W 5%
GND_U
C725
NC/100uF/16V
/OCS3
C703
0.1uF/16V
EGA10603V05A1-B
USBDN2_DM
/OCS2
C702
100uF/16V
+
/OCS1
2
1
Dow nstream 2
R708
10K 1/16W 5%
1uF/16V
1
R728
NC/10K 1/16W 5%+
NC/EGA10603V05A1-B
12
C720
2
2
DP1
1
1
PRTPWR1
DM1
t NC/PTCRFB703NC/120 OHM
FB701120 OHM
EGA10603V05A1-B
GND_U
1
2
F703
F701
t PTCR
EGA10603V05A1-B
1
2
USBDN1_DP
ZD702
EGA10603V05A1-B
1
2
OCS1
EGA10603V05A1-B
1
USBDN1_DM
13
ZD701
5 6 7 8
100K 1/16W 5%
GND_U
4
0R05 1/16W
1 2 3 4
Dow nstream 1
1
2
3
1
DP0
R703
R704
/OCS1
DM0
4
USBUP_DP
30
31
USB5V
USB5V
CN701
CONNNECTOR
5 6 7 8
USBUP_DM
1
2
3
4
2
C701
1uF/16V
Upstream
VBUS_DET
0R05 1/16W
L701 NC
2
3
R701
27
100K 1/16W 5%
R702
USB2514-AEZG
1 2 3 4
U701
C749
47uF/25V
R766 0 OHM .NC R751,C736,R750
NC
GND_U
0.1uF/16V
GND_U
GND_U
GND_U
T P V ( Top
絬隔瓜絪腹
Key Component
Date
43
OEM MODEL VSC VG2427
Size
C
G2829-1-X-X-2-090221
Victory
Electronics
TPV MODEL USB8QQ2
Rev
B
02.USB HUB USB2514
PCB NAME
称爹
备注
Monday , February 23, 2009
Co . ,
Ltd. )
Sheet
G2829-1
2
of
2
9. PCB Layout Diagrams
9.1 Main Board
44
45
9.2 Power Board
46
47
9.3 Key Board
9.3 USB Board
48
49
10. Exploded Diagram and Exploded Parts List
10.1 EPL
50
Item
Description
Part Number
Q'ty
1
BEZEL
A34G0935 KRB1B0130
1
2
LENS
A33G0529 1 1L0100
1
3
KEY PCB
KEPC8AA9
1
4
KEY PAD
A33G0528 AS 1L0100
1
5
PANEL
750GLM236H1111N0VS
1
6
POWER BOARD
PWPC9D41MQWU
1
7
MAIN BOARD-CBPCRNDVSQ1
756GQ8CB VV071
1
8
SPEAKERS
078G 311 20 G
1
9
MAIN FRAME
A15G0489301
1
10
SHIELD-AC
A85G0133101
1
11
REAR COVER
A34G0936 KR 3B0100
1
12
HINGE COVER
A33G0669 KR 1L0100
1
13
HINGE ASS’Y
Q37G0139013
1
14
LOGO
023G3178709 3A
1
15
KEY PAD CABLE
--
1
16
LVDS CABLE
095G8018 3DH64
1
17
M/B TO P/B CABLE
--
1
51
10.2 PPL
Item
Description
Part Number
Q'ty
1
Signal cable
089G 728CAA DB
1
2
Audio cable
089G 17356X553
1
3
DVI cable
089G1748HAA AC
1
4
Power cable
089G402A18N IS
1
5
EPS(top)
Q44GD020101
1
6
LCD Monitor
---
1
7
Manual
Q70G2401709 3A
1
8
EPS(bottom)
Q44GD020201
1
9
Carton
Q44GD020709 1A
1
52
11. Recommended Spare Parts List
TDRMNDDKWBVSPC
Location
Part Number
Description
019G6014 1
TIE FOR STRAP
023G3178709 3A
LOGO
041G 68508 A
CONTROL CARD
050G 600 1 W
WHITE STRAP
050G 600 2
HANDLE1
050G 600 3
HANDLE2
052G
1185 24
VSC TAPE
052G
1186
SMALL TAPE
052G
1211 A
CONDUCTIVE TAPE 55MM *45MM *0.08MM
052G
2191 A
PAPER TAPE
Remark
070GHDCP500HDC
HDCP CODE
E07801
078G 311 20 G
SPEAKER 4 OHM 3 W L: 250MM 57.5X23MM
E07801
078G 311 20 V
SPK 4 OHM 3 W 57.5X23 250 250MM VECO
2nd source
E07801
078G 311 20 Y
SPK 4 OHM 3 W 57.5X23 250 250MM SUNLINK
2nd source
089G 175 8 G
FQE41177F USB CABLE 1800MM A+B
E08902
089G 728CAA DB
D-SUB CABLE
E08902
089G 728HAA DB
D-SUB CABLE
2nd source
E08903
089G1748CAA AC
SIGNAL CABLE DVI COMLINK
2nd source
E08903
089G1748HAA AC
DVI CABLE
089G402A18N IS
POWER CORD/32-D022438
E09501
095G8018 3DH64
LVDS CABLE 30P-30P 180MM
E09501
095G8018 3XH64
LVDS CABLE 30P-30P 180MM
0G1G1030 6120
SCREW
0M1G 130 5120
SCREW
0M1G1730 6120
SCREW,42-D020523
0M1G1730 6120
SCREW,42-D020523
0M1G2940 10225 CR3
SCREW
E750
750GLM236H1111N0VS
PANEL M236H1-L01 C1 TW CMO
E750
750GLM236H1112N0VS
PANEL M236H1-L01 NB CMO
756GQ8CB VV071
MAIN BOARD-CBPCRNDVSQ1
SMTCR-U402 100GVNMD001N11
MCU ASS'Y-056G1133 90 1
A15G0489301
MAINFRAME
A33G0528 AS 1L0100
KEY PAD
A33G0529 1 1L0100
LENS
A33G0669 KR 1L0100
HINGE COVER
A34G0935 KRB1B0130
BEZEL L236W-8VSC2-P4
53
2nd source
2nd source
A34G0936 KR 3B0100
REAR COVER 23.6"
A85G0133101
SHIELD-AC
AM1G1740 12225 CR3
SCREW
040G 45762412B
CBPC LABEL
CN701
033G3802 9B Y
W
WAFER
CN404
033G8019 6C
CONN.6P 1.0 DIP
CN302
033G8027 30
WAFER 30P 2.0MM DIP DUAL ROW
CN101
088G 35315F XH
D-SUB 15PIN VERTICAL CONN WITH SCREW
CN102
088G 35424F XH
DVI 24PIN CONN F ATTACHED SCREW
X401
093G 2251B J
NXS12.000AC30F-BT-2
C707
067G 2151014PB
EC 100UF M 25V 6.3*11MM
C704
067G 2151014PB
EC 100UF M 25V 6.3*11MM
C305
067G 2151014PB
EC 100UF M 25V 6.3*11MM
U401
056G 562583
IC NT68667UFG/C QFP-128L
U703
056G 563 52
IC AP1117D33L-13 TO252-3L DIODES
U704
056G 56327A
IC AP1117E18LA SOT223-3L ANACHIP
U107
056G 662502
IC ESD AZC199-04S SOT23-6L
U106
056G 662502
IC ESD AZC199-04S SOT23-6L
U105
056G 662502
IC ESD AZC199-04S SOT23-6L
U104
056G 662502
IC ESD AZC199-04S SOT23-6L
U103
056G 662502
IC ESD AZC199-04S SOT23-6L
U102
056G1133 34
M24C02-WMN6TP
U402
056G1133 90 1
IC PM25LV020-100SCE 2MB SOIC-8 PMC
Q301
057G 763 1
A03401 SOT23 BY AOS(A1)
R415
061G0402000
RST CHIP MAX 0R05 1/16W
R416
061G0402000
RST CHIP MAX 0R05 1/16W
R466
061G0402000
RST CHIP MAX 0R05 1/16W
R446
061G0402000
RST CHIP MAX 0R05 1/16W
R142
061G0402000 Y
RST CHIP MAX 0R05 1/16W YAGEO
R134
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R132
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R131
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R130
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R129
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R128
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R127
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R126
061G0402100
RST CHIPR 10 OHM +-5% 1/16W
R438
061G0402100 1F
RST CHIPR 1KOHM +-1% 1/16W
R439
061G0402100 1F
RST CHIPR 1KOHM +-1% 1/16W
R101
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
54
R105
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R109
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R111
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R113
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R119
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R404
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R409
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R417
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R706
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R454
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R122
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R121
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R104
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R103
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R118
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R117
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R115
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R114
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R705
061G0402102
RST CHIPR 1 KOHM +-5% 1/16W
R702
061G0402102
RST CHIPR 1 KOHM +-5% 1/16W
R141
061G0402102
RST CHIPR 1 KOHM +-5% 1/16W
R139
061G0402102
RST CHIPR 1 KOHM +-5% 1/16W
R120
061G0402102
RST CHIPR 1 KOHM +-5% 1/16W
R305
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R308
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R403
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R405
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R413
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R708
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R462
061G0402105
RST CHIPR 1MOHM +-5% 1/16W
R418
061G0402121
RST CHIP 120R 1/16W 5%
R407
061G0402203
RST CHIP 20K 1/16W 5%
R106
061G0402222
RST CHIPR 2.2 KOHM +-5% 1/16W
R107
061G0402222
RST CHIPR 2.2 KOHM +-5% 1/16W
R419
061G0402223
RST CHIPR 22 KOHM +-5% 1/16W
R704
061G0402223
RST CHIPR 22 KOHM +-5% 1/16W
R304
061G0402223
RST CHIPR 22 KOHM +-5% 1/16W
R465
061G0402332
RST CHIPR 3.3KOHM +-5% 1/16W
R444
061G0402392
RST CHIP 3.9K 1/16W 5%
R445
061G0402392
RST CHIP 3.9K 1/16W 5%
55
R401
061G0402470 0F
RST CHIPR 0402 470 OHM +-1% 1/16W
R110
061G0402471
RST CHIPR 470 OHM +-5% 1/16W
R303
061G0402472
RST CHIPR 4.7 KOHM +-5% 1/16W
R138
061G0402472
RST CHIPR 4.7 KOHM +-5% 1/16W
R137
061G0402472
RST CHIPR 4.7 KOHM +-5% 1/16W
R136
061G0402472
RST CHIPR 4.7 KOHM +-5% 1/16W
R306
061G0402563
RST CHIP 56K 1/16W 5%
R116
061G0402750
RST CHIPR 75 OHM +-5% 1/16W
R112
061G0402750
RST CHIPR 75 OHM +-5% 1/16W
R108
061G0402750
RST CHIPR 75 OHM +-5% 1/16W
R102
061G0603000
RST CHIP MAX 0R05 1/10W
R468
061G0603101
RST CHIPR 100 OHM +-5% 1/10W
R301
061G1206221
RST CHIPR 220 OHM +-5% 1/4W
R302
061G1206221
RST CHIPR 220 OHM +-5% 1/4W
C107
065G0402102 32
1000PF +-10% 50V X7R
C115
065G040210412T
CHIP 0.1UF 16V X7R
C301
065G040210412T
CHIP 0.1UF 16V X7R
C304
065G040210412T
CHIP 0.1UF 16V X7R
C406
065G040210412T
CHIP 0.1UF 16V X7R
C407
065G040210412T
CHIP 0.1UF 16V X7R
C410
065G040210412T
CHIP 0.1UF 16V X7R
C709
065G040210412T
CHIP 0.1UF 16V X7R
C708
065G040210412T
CHIP 0.1UF 16V X7R
C702
065G040210412T
CHIP 0.1UF 16V X7R
C447
065G040210412T
CHIP 0.1UF 16V X7R
C446
065G040210412T
CHIP 0.1UF 16V X7R
C442
065G040210412T
CHIP 0.1UF 16V X7R
C435
065G040210412T
CHIP 0.1UF 16V X7R
C434
065G040210412T
CHIP 0.1UF 16V X7R
C431
065G040210412T
CHIP 0.1UF 16V X7R
C430
065G040210412T
CHIP 0.1UF 16V X7R
C423
065G040210412T
CHIP 0.1UF 16V X7R
C422
065G040210412T
CHIP 0.1UF 16V X7R
C413
065G040210412T
CHIP 0.1UF 16V X7R
C412
065G040210412T
CHIP 0.1UF 16V X7R
C103
065G0402220 31
CHIP 22PF 50V NPO
C104
065G0402220 31
CHIP 22PF 50V NPO
C420
065G0402220 31
CHIP 22PF 50V NPO
C421
065G0402220 31
CHIP 22PF 50V NPO
C117
065G0402224 17
CAP CER 0.22UF -20%-80%
56
C302
065G0402224 17
CAP CER 0.22UF -20%-80%
C401
065G0402224 17
CAP CER 0.22UF -20%-80%
C102
065G0402473 12
CHIP 0.047UF 16V X7R
C106
065G0402473 12
CHIP 0.047UF 16V X7R
C108
065G0402473 12
CHIP 0.047UF 16V X7R
C110
065G0402473 12
CHIP 0.047UF 16V X7R
C111
065G0402473 12
CHIP 0.047UF 16V X7R
C114
065G0402473 12
CHIP 0.047UF 16V X7R
C105
065G0402509 31
CHIP 5PF 50V NPO
C109
065G0402509 31
CHIP 5PF 50V NPO
C113
065G0402509 31
CHIP 5PF 50V NPO
C303
065G0603105 12
CHIP 1UF 16VX7R 0603
C403
065G060310517T
MLCC 0603 CAP 1UF Z 16V Y5V
C404
065G060310517T
MLCC 0603 CAP 1UF Z 16V Y5V
C439
065G060310517T
MLCC 0603 CAP 1UF Z 16V Y5V
C448
065G060310517T
MLCC 0603 CAP 1UF Z 16V Y5V
C438
065G0805105 12
1UF +-10% 6V X7R
C440
065G0805475A7Z
CAP CHIP 4.7UF 10V Y5V -20%~+80%
FB407
071G 56G301 EA
BEAD 300Ω
FB404
071G 56G301 EA
BEAD 300Ω
FB401
071G 56G301 EA
BEAD 300Ω
FB301
071G 56K121
CHIP BEAD
FB406
071G 56V301 B
CHIP BEAD FCM2012VF-301T07 BULLWILL
FB403
071G 56V301 B
CHIP BEAD FCM2012VF-301T07 BULLWILL
FB105
071G 59B121
TB160808B
FB103
071G 59K190 B
19 OHM BEAD
FB102
071G 59K190 B
19 OHM BEAD
FB101
071G 59K190 B
19 OHM BEAD
ZD104
093G 39GA01 T
RLZ5.6B
715G3226 1
MAIN BOARD PCB
R470
061G0402000
RST CHIP MAX 0R05 1/16W
C432
065G040210412T
CHIP 0.1UF 16V X7R
C433
065G040210412T
CHIP 0.1UF 16V X7R
R443
061G0402392
RST CHIP 3.9K 1/16W 5%
R420
061G0402223
RST CHIPR 22 KOHM +-5% 1/16W
R425
061G0402102
RST CHIPR 1 KOHM +-5% 1/16W
R469
061G0402432
RST CHIP 4K3 1/16W 5%
R472
061G0603471
RST CHIPR 470 OHM +-5% 1/10W
R703
061G0402000
RST CHIP MAX 0R05 1/16W
R707
061G0402000
RST CHIP MAX 0R05 1/16W
57
ZD401
093G 39S 34 T
UDZSNP5.6B ROHM
ZD402
093G 39S 34 T
UDZSNP5.6B ROHM
ZD403
093G 39S 34 T
UDZSNP5.6B ROHM
D102
093G 64 42 PP
BAV70 SOT-23
D103
093G 64 42 PP
BAV70 SOT-23
R148
061G0402472
RST CHIPR 4.7 KOHM +-5% 1/16W
R149
061G0402472
RST CHIPR 4.7 KOHM +-5% 1/16W
R151
061G0402472
RST CHIPR 4.7 KOHM +-5% 1/16W
R150
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
R147
061G0402101
RST CHIPR 100 OHM +-5% 1/16W
C121
065G0402224 17
CAP CER 0.22UF -20%-80%
U108
056G1133 34
M24C02-WMN6TP
Q401
057G 417517
TRA LMBT3906LT1G -200MA/-40V SOT-23 LRC
Q402
057G 417517
TRA LMBT3906LT1G -200MA/-40V SOT-23 LRC
Q302
057G 417518
TRA LMBT3904LT1G 200MA/40V SOT-23 LRC
Q701
057G 417518
TRA LMBT3904LT1G 200MA/40V SOT-23 LRC
KEPC8AA9
KEY BOARD
SW01
077G 500 5F XL
DOME SWITCH 5PCS
CN001
089G 76J 6 3
FFC CABLE 6P 220MM P1.0
709G3265 QM001
CONSUMPTIVE ASS'Y
R004
061G0603200 1F
RST CHIPR 2 KOHM +-1% 1/10W
R003
061G0603200 1F
RST CHIPR 2 KOHM +-1% 1/10W
R001
061G0603300 1F
RST CHIPR 3 KOHM +-1% 1/10W
R002
061G0603300 1F
RST CHIPR 3 KOHM +-1% 1/10W
LED001
081G 14 12 KT
CHIP LED
715G3265 1
KEY BOARD PCB
D101
093G 39P599 T
MM3Z5V6B
D102
093G 39P599 T
MM3Z5V6B
C001
065G0402104 12
CAP CHIP 0402 0.1UF 16V X7R
C002
065G0402104 12
CAP CHIP 0402 0.1UF 16V X7R
709G3265 QS001
CONSUMPTIVE ASS'Y
Q05G6054 1
SHEET
Q09G6012 1
PIN
PWPC9D41MQWU
POWER BOARD
040G 45762412B
CBPC LABEL
GND1
009G6005 1
GROUND TERMINAL
CN602
033G3802 4
WAFER EH-4
CN804
033G8021 2E F
WAFER
CN803
033G8021 2E F
WAFER
CN802
033G8021 2E F
WAFER
58
CN801
033G8021 2E F
WAFER
IC903
056G 139 3A
IC PC123Y22FZ0F
IC601
056G 616 34
IC APA2069JITUL 2.6W*2 PDIP-16
NR901
061G 58809MEN
RST NTCR 8OHM £«£20£¥ 4A XIANZHENG
C904
063G107K224 UM
X2 CAP 0.22UF K 275VAC
C819
065G 3J5606ET
CAP CER 56PF J 3KV
C820
065G 3J5606ET
CAP CER 56PF J 3KV
C821
065G 3J5606ET
CAP CER 56PF J 3KV
C822
065G 3J5606ET
CAP CER 56PF J 3KV
C817
065G 6J2096ET
2PF 5% SL 6KV
C901
065G305M1022BP
Y2 1000PF M 250VAC Y5P
C902
065G305M1022BP
Y2 1000PF M 250VAC Y5P
C921
065G306M1022BP
1000PF Y1.CAP
C900
065G306M3322BP
3300PF 20%
C905
067G 40Z12115K
EC 120UF V 450V 20*40MM
C804
067G215A1024KV
EC 1000UF 25V 12.5*20MM
C916
067G215A1024KV
EC 1000UF 25V 12.5*20MM
C917
067G215D6814KV
CAP 105℃ 680UF M 25V
C918
067G215D6814KV
CAP 105℃ 680UF M 25V
C908
067G215R2207KV
LOW ESR EC 22UF 50V M 6.3*11MM
C939
067G215S1024KV
EC 105℃ CAP 1000UF M 25V
C915
067G215S4713KV
EC 105℃ CAP 470UF M 16V
C613
067G215V101 4N
KY25VB100M-CC3(6.3*11) 100UF M 25V
C604
067G215V101 4N
KY25VB100M-CC3(6.3*11) 100UF M 25V
L802
073G 174 35DNA
FILTER 200MH±25%
L801
073G 174 35DNA
FILTER 200MH±25%
L905
073G 253 91 L
CHOKE BY LI TA
L904
073G 253 91 L
CHOKE BY LI TA
L903
073G 253 91 L
CHOKE BY LI TA
L901
073L 174 26T1G
LINE FILTER 27MH
T901
080GL22T 3 N1
X'FMR 490UH YUVA-1093
PT801
080GL24T 23 DN
X'FMR 68UH TK.2005Y.101 VOC
CN901
087G 501 32 S
AC SOCKET
CN601
088G 30214K DC
PHONE JACK 5PIN
BD901
093G 50460900
BRIDGE 4A/800V GBU408 LITEON
D907
093G3006 1 1
31DQ06FC3 NIHON INTER
CN902
095G 82013D514
HARNESS 9P(SAN)-2P(PH)+9P(PLUG) 220/200
705GQ851002
OIL FOR DISAPPEAR ASS'Y
705GQ857026
Q901 ASS'Y
057G 667 21
STP10NK70ZFP
Q901
59
HS1
D908
HS2
D906
HS3
0M1G 930 8120
SCREW
Q90G6263 6
HEAT SINK
705GQ893039
D908 ASS'Y
093G 60278
DIODE SP1060 ITO-220 SECOS
0M1G 930 8120
SCREW
Q90G6263 6
HEAT SINK
705GQ893040
D906 ASS'Y
093G 52 66
DIODE FMX-12SL 10A/200V TO-220
0M1G 930 8120
SCREW
Q90G6264 5
HEAT SINK
709G2824 QM001
CONSUMPTIVE ASS'Y
055G
ALCOHOL
2
055G 23524
WELDING FLUX WITHOUT PB
Q55G 100625
TIN STICK_LOW ARGENTUM
IC901
056G 379128
IC LD7576 GS SOP-8
IC801
056G 608 12
IC TA9687GN-A-0-TR SOP-16
Q607
057G 417512
MMBT3906
Q608
057G 417903 T
TRA SIG SM MMBT3904
Q802
057G 759 2
RK7002FD5T116 SOT-23 BY ROHM
Q806
057G 763 91
ET AO4620 7.2A/30V -5.3A/-30V SOIC-8
Q805
057G 763 91
ET AO4620 7.2A/30V -5.3A/-30V SOIC-8
R612
061G0603100
RST CHIPR 10 OHM +-5% 1/10W
R926
061G0603100 1F
RST CHIPR 1 KOHM +-1% 1/10W
R812
061G0603100 3F
RST CHIPR 100 KOHM +-1% 1/10W
R810
061G0603100 3F
RST CHIPR 100 KOHM +-1% 1/10W
R806
061G0603100 3F
RST CHIPR 100 KOHM +-1% 1/10W
R613
061G0603102
RST CHIPR 1K OHM +-5% 1/10W
R605
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R604
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R807
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R801
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R610
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R609
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R603
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R602
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R601
061G0603103
RST CHIPR 10 KOHM +-5% 1/10W
R813
061G0603104
RST CHIPR 100 KOHM +-5% 1/10W
R809
061G0603105
RST CHIPR 1M OHM +-5% 1/10W
R838
061G0603105
RST CHIPR 1M OHM +-5% 1/10W
R839
061G0603105
RST CHIPR 1M OHM +-5% 1/10W
60
(PHSE) R
R840
061G0603105
RST CHIPR 1M OHM +-5% 1/10W
R841
061G0603105
RST CHIPR 1M OHM +-5% 1/10W
R930
061G0603243 1F
RST CHIPR 2.43K OHM +-1% 1/10W
R927
061G0603360 1F
RST CHIPR 3.6K OHM +-1% 1/10W
R808
061G0603390 0F
RST CHIPR 390 OHM +-1% 1/10W
R845
061G0603512
RST CHIPR 5.1 KOHM +-5% 1/10W
R844
061G0603512
RST CHIPR 5.1 KOHM +-5% 1/10W
R843
061G0603512
RST CHIPR 5.1 KOHM +-5% 1/10W
R842
061G0603512
RST CHIPR 5.1 KOHM +-5% 1/10W
R611
061G0603563
RST CHIPR 56 KOHM +-5% 1/10W
R836
061G0603563
RST CHIPR 56 KOHM +-5% 1/10W
R606
061G0603622 Y
RST CHIPR 6.2KOHM +-5% 1/10W YAGEO
R607
061G0603622 Y
RST CHIPR 6.2KOHM +-5% 1/10W YAGEO
R837
061G0603682
RST CHIPR 6.8 KOHM +-5% 1/10W
R811
061G0603820 2F
RST CHIPR 82 KOHM +-1% 1/10W
JR801
061G0805000
RST CHIP MAX 0R05 1/8W
JR803
061G0805000
RST CHIP MAX 0R05 1/8W
JR804
061G0805000
RST CHIP MAX 0R05 1/8W
R924
061G0805101
1ST CHIPR 100
OHM +-5% 1/8W
R925
061G0805102
RST CHIPR 1K
OHM +-5% 1/8W
R939
061G0805102
RST CHIPR 1K
OHM +-5% 1/8W
R938
061G0805103
RST CHIPR 10K OHM +-5% 1/8W
R816
061G0805150
15 0805
R817
061G0805150
15 0805
R818
061G0805150
15 0805
R819
061G0805150
15 0805
R802
061G0805220
RST CHIPR 22 OHM +-5% 1/8W
R943
061G0805471
RST CHIPR 470 OHM +-5% 1/8W
R803
061G0805512
RST CHIPR 5.1 KOHM +-5% 1/8W
R804
061G0805512
RST CHIPR 5.1 KOHM +-5% 1/8W
R830
061G0805682
RST CHIPR 6.8 KOHM +-5% 1/8W
JR802
061G1206000
RST CHIP MAX 0R05 1/4W
JR901
061G1206000
RST CHIP MAX 0R05 1/4W
JR902
061G1206000
RST CHIP MAX 0R05 1/4W
R910
061G1206100
RST CHIPR 10
R962
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R961
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R951
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R950
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R949
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
61
OHM +-5% 1/4W
R935
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R920
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R919
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R918
061G1206101
RST CHIPR 100 OHM +-5% 1/4W
R912
061G1206221
RST CHIPR 220 OHM +-5% 1/4W
R909
061G1206339
RST CHIPR 3.3 OHM +-5% 1/4W
R904
061G1206822
RST CHIPR 8.2 KOHM +-5% 1/4W
R905
061G1206822
RST CHIPR 8.2 KOHM +-5% 1/4W
R901
061G1206824 F
RST CHIPR 820KOHM +-5% 1/4W FENGHUA
R902
061G1206824 F
RST CHIPR 820KOHM +-5% 1/4W FENGHUA
C610
065G0603101 31
CER1 0603 NP0 50V 100P PM5 R
C611
065G0603101 31
CER1 0603 NP0 50V 100P PM5 R
C932
065G0603102 32
1000PF +-10% 50V X7R
C612
065G0603104 12
CER2 0603 X7R 16V 100N P
C614
065G0603104 12
CER2 0603 X7R 16V 100N P
C809
065G0603221 31
CER1 0603 NP0 50V 220P P
C814
065G0603221 31
CER1 0603 NP0 50V 220P P
C805
065G0603223 32
CHIP 0.022UF 50V X7R 0603
C810
065G0603332 32
CHIP 0.0033UF 50V X7R 0603
C606
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C603
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C602
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C601
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C928
065G0805103 32
CAP CHIP 0805 10NF K 50V X7R
C931
065G0805104 32
CAP CHIP 0805 0.1UF K 50V X7R
C930
065G0805104 32
CAP CHIP 0805 0.1UF K 50V X7R
C924
065G0805104 32
CAP CHIP 0805 0.1UF K 50V X7R
C907
065G0805104 32
CAP CHIP 0805 0.1UF K 50V X7R
C815
065G0805104 32
CAP CHIP 0805 0.1UF K 50V X7R
C811
065G0805104 32
CAP CHIP 0805 0.1UF K 50V X7R
C608
065G080510522K
T
CAP CHIP 0805 1UF K 25V X7R
C609
065G080510522K
T
CAP CHIP 0805 1UF K 25V X7R
C818
065G0805155 A2
1.5 UF 10V
C909
065G0805221 31
CAP CHIP 0805 220PF J 50V NPO
C806
065G0805225 12
CAP CHIP 0805 2.2UF K 16V X7R
C808
065G0805333 32
CHIP 0.033UF 50V
C940
065G0805473 22
SMD 47NF +-10%25V XTR
C801
065G0805473 32
CHIP 0.047UF 50V X7R
C802
065G0805473 32
CHIP 0.047UF 50V X7R
C935
065G1206102 72
CAP CHIP 1206 1000PF K 500V X7R
62
C929
065G1206102 72
CAP CHIP 1206 1000PF K 500V X7R
C912
065G1206102 72
CAP CHIP 1206 1000PF K 500V X7R
FB902
071G 57G800 B
CHIP BEAD HCB3216KF-800T30 BULLWILL
D806
093G 64 42 P
BAV70 SOT23 BY PAN JIT
D807
093G 64 42 P
BAV70 SOT23 BY PAN JIT
D808
093G 64 42 P
BAV70 SOT23 BY PAN JIT
ZD802
093G 39S 24 T
RLZ 5.6B LLDS
ZD803
093G 39S 24 T
RLZ 5.6B LLDS
CN901
006G 31500
EYELET
Q903
057G 761 16
TRA KTD1028 KEC
R946
061G152M10152T
RST MOFR 100OHM +-5% 2WS FUTABA
R903
061G152M10452T
RST MOFR 100KOHM +-5% 2WS
R914
061G152M39852T
RST MOFR 0.39 OHM +-5% 2WS
R828
061T211S62552T SY
MGFR 6.2MOHM +-5% 1WS FUTABA
C906
065G 2K152 2T6921
CAP CER 1500PF K 2KV Y5P
FB602
071G 55 9 T
FERRITE BEAD
J806
071G 55 9 T
FERRITE BEAD
071G 55 29
FERRITE BEAD
F901
084G 56 4 B
FUSE 4A 250V
F902
084G 56 4 B
FUSE 4A 250V
F903
084G 56 4 B
FUSE 4A 250V
ZD902
093G 3952152T
TZX18B
D900
093G 6026T52T
RECTIFIER DIODE FR107
D901
093G 6038T52T
FR103
D903
093G 64 1152T
1N4148
D801
093G 64 1152T
1N4148
D601
093G 64 1152T
1N4148
715G2824 4 5
POWER BOARD PCB
056G 158 12
KIA431A-AT/P TO-92
709G2824 QA001
CONSUMPTIVE ASS'Y
095G 90 23
JUMPER WIRE
093G 6433S
DIODE BAV99 SEMTECH
709G2824 QS001
CONSUMPTIVE ASS'Y
052G
PAPER TAPE
FB901
IC904
D803
2191 A
Q05G6054 1
SHEET
Q09G6012 1
PIN
R940
061G0603430 2F
RST CHIPR 43 KOHM +-1% 1/10W
HS4
Q90G6295 3
HEAT SINK
C903
063G107K474 TS
CAP X2 0.47UF K 275VAC
Q07G
1 5V94
X
WOODEN PALLET
63
Q37G0139013
VSC 23.6 HINGE ASS'Y
Q40G 58170931A
HT POT LABEL
Q40G0001624 4A
PALLET LABEL
Q40G000270927A
EPA LABEL
Q44G6002123 93
PAPER BOARD
Q44G6002CP1A27
PAPER CAP
Q44G9003220
CORNER PAPER
Q44GD020101
EPS
Q44GD020201
EPS
Q44GD020709 1A
23 LCD CARTON
Q45G 77 5
PE PACKING
Q45G 88609120
EPE BAG
Q50G
TIE
4 10
Q52G6020139
PROTECT FILM
USB8QQ2
USB BOARD
033G3802 2B Y
CONNECTOR
040G 45762412B
CBPC LABEL
C746
067G 3151014KV
EC 105℃ CAP 100UF M 25V
C749
067G215V470 4N
KY25VB47-M-CC3.0 5*11MM
C716
067G305V101 3
105℃ 100UF M 16V
C702
067G305V101 3
105℃ 100UF M 16V
CN702
088G 350 1 TN
USB CONN
CN701
088G 351 2B TN
USB CONN
X701
093G 2245B HE
XTL XAT024000FI1H-3OX AT-49 24.000MHZ
U705
056G 585 4A
IC AP1117E33L-13
U701
056G 659 9
IC USB2514-AEZG QFN-36
F702
061G 56A075 LT
SMD PTC 0.75A 1206L075.WR 1206
F701
061G 56A075 LT
SMD PTC 0.75A 1206L075.WR 1206
R723
061G0402000
RST CHIP MAX 0R05 1/16W
R722
061G0402000
RST CHIP MAX 0R05 1/16W
R715
061G0402000
RST CHIP MAX 0R05 1/16W
R712
061G0402000
RST CHIP MAX 0R05 1/16W
R703
061G0402000
RST CHIP MAX 0R05 1/16W
R702
061G0402000
RST CHIP MAX 0R05 1/16W
R708
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R725
061G0402103
RST CHIPR 10 KOHM +-5% 1/16W
R701
061G0402104
RST CHIPR 100 KOHM +-5% 1/16W
R704
061G0402104
RST CHIPR 100 KOHM +-5% 1/16W
R716
061G0402104
RST CHIPR 100 KOHM +-5% 1/16W
R717
061G0402104
RST CHIPR 100 KOHM +-5% 1/16W
CN704
64
R718
061G0402104
RST CHIPR 100 KOHM +-5% 1/16W
R719
061G0402104
RST CHIPR 100 KOHM +-5% 1/16W
R720
061G0402104
RST CHIPR 100 KOHM +-5% 1/16W
R724
061G0402105
RST CHIPR 1MOHM +-5% 1/16W
R709
061G0402153
RST CHIP 15K 1/16W 5%
R726
061G0402153
RST CHIP 15K 1/16W 5%
R721
061G0603120 2F
RST CHIPR 12 KOHM +-1% 1/10W
R750
061G0603360 1F
RST CHIPR 3.6K OHM +-1% 1/10W
C706
065G0402103 12
CAP CHIP 0402 10N 16V X7R
C705
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C707
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C709
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C710
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C711
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C712
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C714
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C717
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C718
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C724
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C747
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C748
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C703
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C713
065G0402270 31
0402 27PF J 50V NPO
C708
065G0402270 31
0402 27PF J 50V NPO
C720
065G0603105 12
CHIP 1UF 16VX7R 0603
C701
065G0603105 12
CHIP 1UF 16VX7R 0603
C719
065G0805475 A5
0805 4.7UF +-10% 10V X5R
C715
065G0805475 A5
0805 4.7UF +-10% 10V X5R
C745
065G1206106 05
CHIP 10UF/6.3V X5R
FB706
071G 56K121
CHIP BEAD
FB702
071G 56K121
CHIP BEAD
FB701
071G 56K121
CHIP BEAD
ZD706
093G 64 49 SU
DIODE ESD EGA 10603V05A1-B INPAQ
ZD705
093G 64 49 SU
DIODE ESD EGA 10603V05A1-B INPAQ
ZD702
093G 64 49 SU
DIODE ESD EGA 10603V05A1-B INPAQ
ZD701
093G 64 49 SU
DIODE ESD EGA 10603V05A1-B INPAQ
ZD703
093G 64 49 SU
DIODE ESD EGA 10603V05A1-B INPAQ
ZD704
093G 64 49 SU
DIODE ESD EGA 10603V05A1-B INPAQ
715G2829 1
USB BOARD PCB
061G1206000
RST CHIP MAX 0R05 1/4W
R752
65
E08904
089G 17356X553
AUDIO CABLE
Q41G2401709 3A
VA2413WM SERVICE INSERT
Q41G2401709 7A
VG2427WM QSG FOR LI
Q45G2007M0102A
PE BAG FOR MANUAL
Q70G2401709 3A
VG2427WM CD MANUAL
040G 581 26704
SHIPPING LABEL
040G 58162435A
P/N LABEL FOR MANUAL PE BAG
Q40G 24N709 2A
RATING LABEL
Q40G 581709 1B
CARTON LABEL
Q40G0001709 2A
SN LANEL
12. Different Parts List
Diversity of TDRMNDDYWBVSPC compared with TDRMNDDKWBVSPC
Location
Part Number
052G
1185
Description
MIDDLE TAPE
089G414A18N YH
POWER CORD(32E1818021)
Q07G
WOODEN PALLET
1 5V94
Q40G 58170930A
LABEL
Q40G000270945A
CARTON STICK+CEL
Q45G2007C0121A
CARTON PE BAG
Q40G000270926A
MANUFACTURE ADDRESS STICKER
Q41G2401709 4A
WARRANTY CARD
Q41G2401709 8A
VG2427WM QSG FOR LC
Q41G5000709 4A
ROHS CARD
Q45G2007M0101A
PE BAG
040G 58170912A
S/N LABEL
040G 58160811A
GREEN DOT LABEL
P40GD000813 9A
FAMILY SHEET
LABEL FOR VG2427WM
Diversity of TDRMNDDCWBVSPC compared with TDRMNDDKWBVSPC
Location
Part Number
Description
089G420A18N IS
POWER CORD 32-D001922
Q45G2007M0101A
PE BAG
Diversity of TDRMNDDBWBVSPC compared with TDRMNDDKWBVSPC
Location
Part Number
Description
089G404A18N YH
POWER CORD(32E1818018/32-D022217)
Q45G2007M0101A
PE BAG
66
* Reader’s Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous
improvement of our products. We would appreciate your completion of the Assessment Matrix
below, for return to ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit
Excellent
Good
Fair
Bad
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjustment Procedure
6. Troubleshooting Flow Chart
7. Block Diagrams
8. Schematic Diagrams
9.PCB Layout Diagrams
10. Exploded Diagram and Exploded Parts List
11. Recommended Spare Parts List
B. Are you satisfied with this Service Manual?
Item
Excellent
Good
Fair
Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing
C. Do you have any other opinions or suggestions regarding this service manual?
Reader’s basic dada:
Name:
Title:
Company:
Add:
Tel:
Fax:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes
(marc.maupin@viewsonic.com)
67
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising