HDMI to DVI with Audio Converter
ITEM NO.: HD01
These handy devices provide an easy and instant approach for converting digital video (HDMI) and both digital audio (SPDIF) and analog stereo audio to digital video (DVI). With these Converters, HDMI based devices such as DVD, PS3, or set top boxes can connect to your PC LCD monitor and PC speakers at lowest cost. DVI based devices such as PC with SPDIF or analog stereo audio can connect to your HDMI
TV at lowest cost.
HD01 HDMI to DVI Converter
Feature:
HDMI 1.3 compatible
Fully HDCP compliant
DVI video up to 165MHz
Coaxial SPDIF audio, stereo analog audio output
Front & Real Panel:
Dip Switch Setting:
1. MODE: 2-level dip switch for audio settings
2.
1 ON: 2 channel Analog Audio output
2 ON: 2 channel / 5.1 channels SPDIF output
OFF: No audio output
LED Status Indicator
[HDMI] − lights up means the HDMI device is connected
[Power] − lights up means the DC power is connected
Remark: SPDIF format is dependent upon the embedded digital audio part in the input HDMI stream. The SPDIF receiver must be able to recognize the input SPDIF format. Our device only separates the digital audio in HDMI stream, and bypasses this decoded audio to the output.
Analog audio only support 2 channels, there is no output when the source is AC3/DTS multi channel audio.
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
Installation View:
HD01
REMARK:
EDID: Extended display identification data is a data structure provided by a computer display to describe its capabilities to a graphics card. It is what enables a modern personal computer to know what kind of monitor is connected
Trouble Shooting:
1. Only HDMI enabled TV sets with underscan/overscan* support, the full active video can be accurately displayed. Some HDMI equipped TV sets may not support this feature. If underscan/overscan* is NOT supported, the top, bottom, left and right border of the active video may be screened, and the S/PDIF audio may not sound right.
2. S/PDIF audio input can support up to 6-channel audio input. If your TV not supports Dolby Digital or dts audio decoding, then you will add audio decoder or amplifier.
3. S/PDIF supports only 48 KHz audio sample rate. Other than this rate, the input digital audio should be adjusted to 48 KHz in order to get audio signal correctly sent.
Specification:
ITEM NO.
Video Amplifier Bandwidth
Output Video Signal
Output DDC Signal
Single Link Rang
Input/Output Connector
Temperature
Power Consumption
Power Supply
DIMENSIONS W x H x D mm
Weight
HD01
1.65 Gbps
1.2 Volts p-p
5 Volts p-p (TTL)
1080P/1920x1200
DVI-I 29 pin female (digital only)
HDMI Type A 19 PIN
RCA Connector: Coax SPDIF, 3.5mm Phone Jack: Analog stereo
Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to
95%
440mA (max)
DC5V 1AMP
88 x 95 x 30
190
Rev. B
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
2
