Visioneer Scanner 9000 User's Manual

Visioneer Scanner 9000 User's Manual
Visioneer®
9000 USB Scanner
Installation Guide
COPYRIGHT INFORMATION
Copyright © 2002 Visioneer, Inc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. TextBridge is a registered trademark of
ScanSoft, Inc. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International,
Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The software described is furnished under a
licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on
any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any
purpose other than the licensee's personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer.
Part Number: 05-0494-000
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software
Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer
is solely responsible for complying with all such laws and regulations.
Visioneer's Limited Product Warranty
If you find physical defects in the materials or the workmanship used in making the product described in this document, Visioneer will repair, or at its option,
replace, the product at no charge to you, provided you return it (postage prepaid, with proof of your purchase from the original reseller) during the 12-month
period after the date of your original purchase of the product.
THIS IS VISIONEER'S ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER
REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT,
EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD “AS IS” AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT'S
SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE.
IN NO EVENT WILL VISIONEER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict with the
express requirements of applicable law.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with
FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer
could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation
TABLE OF CONTENTS
i
TA B L E O F C O N T E N T S
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
The Visioneer 9000 USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INSTALLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
STEP 1: Installing the PaperPort Software . . . . . . . . . . . . . . . . . . . . . 5
STEP 2: Connecting the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Getting the PaperPort Software User’s Guide . . . . . . . . . . . . . . 10
STEP 3: Checking Out Your Scanner . . . . . . . . . . . . . . . . . . . . . . . 10
If the Scanner Is Not Properly Connected . . . . . . . . . . . . . . . . . 11
SCANNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Three Ways to Scan Paper Items . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Scanning Paper Items with the OneTouch Buttons . . . . . . . . . . . . . 14
About the OneTouch Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Scanning Paper Items from the Button Panel on the Screen . . . . . . 16
Configuring the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
About the Configuration Dialog Box . . . . . . . . . . . . . . . . . . . . . 18
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Selecting New Options for the Buttons . . . . . . . . . . . . . . . . . . . 21
Creating New Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting Scan Settings and Page Settings . . . . . . . . . . . . . . . . . 22
Setting Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Scanning from the PaperPort Software . . . . . . . . . . . . . . . . . . . . . . 29
Scanning an Item with the Twain Button . . . . . . . . . . . . . . . . . 30
Getting Help with the PaperPort Software . . . . . . . . . . . . . . . . 34
Adjusting the Settings on the Scan Manager Pro . . . . . . . . . . . . . . . 35
Saving a New Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Adjusting the Resolution and Sharpness . . . . . . . . . . . . . . . . . . 38
Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . 39
ii
TABLE OF CONTENTS
Adjusting Gamma, Saturation, and Color Hue . . . . . . . . . . . . . 41
Adjusting Output Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Saving a Custom Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
The Scan Info Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Zooming In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setting Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Getting Help with the Scan Manager Pro . . . . . . . . . . . . . . . . . 51
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Cleaning the Scanner Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
How to Uninstall Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Step 1: Uninstalling the Visioneer OneTouch Software . . . . . . . 54
Step 2: Uninstalling the PaperPort Software . . . . . . . . . . . . . . . 57
Contacting Visioneer America Technical Support . . . . . . . . . . . . . . 58
Contacting Visioneer—International Technical Support . . . . . . . . . 59
Visioneer PhotoPort 9000 USB Scanner Specifications . . . . . . . . . . 60
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
WELCOME
Congratulations on purchasing your Visioneer 9000 USB scanner. With
this scanner you can quickly scan paper items such as letters, forms,
photos, and magazine articles and place their electronic images on your
computer.
WHAT’S IN THE BOX
Please check the contents of the box to make sure that all parts are
included. If any items are missing or damaged, contact the dealer where
you purchased the scanner.
Visioneer 9000 USB Scanner
Software CD
Installation Guide
USB Cable
Power supply
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
1
2
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
THE VISIONEER 9000 USB SCANNER
Document cover
Glass
Reference marks
OneTouch buttons panel
Status light
OneTouch buttons
Custom scan
Scan and email
Scan and print
Scan and OCR
Scan to PaperPort
USB port
Power jack
THE VISIONEER 9000 USB SCANNER
3
Document cover. Close the document cover after placing items on the scanner glass.
Glass. Place items face down on the glass aligned at the arrow symbol in the upper left corner.
Reference marks. Marks on the border of the glass show where to align various paper sizes.
OneTouch button panel. Press a OneTouch button to scan, copy/print, email, OCR
(convert items to text), or use a custom setting for scanning.
Status light. Shows the scanner’s status. Green light: scanner is ready to scan. Orange light:
scanner is busy.
USB port. Plug one end of the USB cable into this port; plug the other end into a USB port
on the computer, keyboard, or a USB hub. Your Visioneer 9000 scanner can connect to either
a USB 1.1 or a USB 2.0 port.
Power jack. Plug the scanner power cord into this jack.
Note: The scanner does not have an on/off switch. The scanner is ready to scan as soon as
Windows loads on your computer.
4
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
WHAT YOU NEED
To use the 9000 OneTouch scanner and software, you need the
following:
■ IBM PC (or 100-percent compatible) Pentium or equivalent
■
Microsoft Windows 98, Windows 2000, Windows Me, or
Windows XP
■
One available Universal Serial Bus (USB) port; the scanner can connect
to either a USB1.1 or to a faster USB 2.0 port (see the note below)
■
Available internal memory (RAM):
■
Windows 98—32 megabytes (MB) or more
■
Windows 2000, Me, or XP—64 MB or more;
128 MB recommended for Windows XP
■
70 MB of free hard disk space
■
A VGA or SVGA monitor. Recommended settings for your monitor
are as many colors as possible—High Color (16-bit), True Color
(24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels.
To set your monitor’s colors and resolution, open the Windows
Control Panel, double-click Display, and then click the Settings tab.
■
A CD-ROM drive
Note: The new USB 2.0 ports operate at higher speeds than USB 1.1
ports. If your computer is not equipped with USB 2.0 ports, you can
add them with the Visioneer Hi-Speed USB 2.0 PCI Card. Please
visit the Visioneer web site at www.visioneer.com for ordering
information, or contact the dealer where you purchased your
Visioneer 9000 OneTouch USB scanner. However, you do not have
to add USB 2.0 ports to the computer. Your scanner automatically
works with both USB 1.1 and USB 2.0 ports.
STEP 1: INSTALLING THE PAPERPORT SOFTWARE
5
Installing
This section of the guide explains how to connect your Visioneer 9000
scanner to a USB 1.1 or USB 2.0 port.
The PaperPort CD includes all the necessary installation files, as well as
the PaperPort software files and other software files.
STEP 1: INSTALLING THE PAPERPORT SOFTWARE
Note: You must install the PaperPort software before connecting the
scanner to the computer. Otherwise the correct software to run your
scanner will not be installed and it may not scan properly.
To install the PaperPort software:
1. Start your computer and make sure that no other applications are
running.
2. Insert the PaperPort CD into your computer’s CD-ROM drive.
The CD automatically starts.
6
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
Note: If the PaperPort CD does not automatically start, make sure
the CD drive’s door is completely shut. If the CD still doesn’t start,
the Autorun option on your computer is turned off. Click the
Windows icon named My Computer. The window shows the drives
available on your computer. Double-click the icon for your
CD-ROM drive to see the list of files on the CD. Double-click the
file named START32.EXE. The CD starts.
3. From the list of options that appears on the screen, select ScanSoft
PaperPort.
4. Select Install ScanSoft PaperPort.
5. Follow the instructions on the screen to install the PaperPort
software on your computer.
During installation, a message instructs you to connect the scanner
to the computer. When you’re finished connecting the scanner as
described below, click Finish in the dialog box.
STEP 2: CONNECTING THE SCANNER
STEP 2: CONNECTING THE SCANNER
Your OneTouch 9000 scanner connects to any available USB 1.1 or
USB 2.0 port. Check your computer’s user’s guide for its USB port
locations.
Note: You do not have to shut off the power to your computer when
connecting the scanner to a USB port.
To connect the Visioneer 9000 scanner to a USB 1.1 or USB 2.0
port:
1. Turn the scanner over to see the locking tab on the bottom. Slide
the locking tab to the unlocked position.
Unlocked position
Note: The locking tab protects the scanner’s scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but always remember to unlock it before
scanning. The scanner will not scan when locked.
7
8
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
2. Plug one end of the USB cable into an available USB 1.1 or USB
2.0 port on the computer.
3. Plug the other end of the USB cable into the scanner’s USB port.
USB
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
Some computers also have keyboards with USB ports. You can plug
the cable into the keyboard instead of the USB port on the
computer.
4. Plug the power adapter cable into the power jack on the back of the
scanner.
5. Plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.
STEP 2: CONNECTING THE SCANNER
9
The status light on the front of the scanner comes on indicating the
scanner is receiving power.
Status light
Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.
Note: If your computer is running Windows XP, you may see
messages about using a fast USB 2.0 connection for your scanner. If
your computer is not equipped with USB 2.0 ports, you can just
disregard those messages.
When the software is finished loading, the Finish button on the
dialog box on the computer screen becomes active.
6. Click the Finish button.
The scanner’s status light is green when the scanner and computer
are communicating properly.
That completes the steps to connect your scanner to the computer.
7. Click Yes, I want to restart my computer now.
8. Click Finish.
Your computer restarts and your scanner is now ready to scan.
9. If you removed the CD from the CD drive and want to install other
software, reinsert the CD into the drive.
Remove the CD from the computer when you’re finished and store
it in a safe place.
10
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
GETTING THE PAPERPORT SOFTWARE USER’S GUIDE
The Installation CD also includes your ScanSoft PaperPort User’s Guide.
This guide provides more detailed information about the PaperPort
software’s features. Please see the CD to view or print the guide.
STEP 3: CHECKING OUT YOUR SCANNER
The OneTouch software adds the scanner icon to the Windows taskbar
(at the bottom right corner of the computer screen). If the scanner is
properly connected, the scanner icon looks like the one in this figure.
Scanner Icon
If the icon has a red X through it, the scanner is not properly connected.
See the section, “If the Scanner Is Not Properly Connected” on page 11
for the steps to fix the problem.
To check the status of the scanner:
1. Place the mouse pointer on the scanner icon in the Windows
taskbar.
2. Right-click the icon. The shortcut menu appears.
STEP 3: CHECKING OUT YOUR SCANNER
11
3. Choose About from the shortcut menu.
A dialog box confirms that the scanner is properly connected.
4. Click OK to close the dialog box. Your scanner is ready to scan.
IF THE SCANNER IS NOT PROPERLY CONNECTED
If the scanner icon on the Windows taskbar has a red “X” through it, the
scanner is not properly connected.
Check for one of these possible problems:
• Is a cable loose or not plugged in securely? Inspect all cable
connections. Make sure all the cables are plugged in securely.
• Is the scanner’s power light on? If the light does not come on, plug
the power adapter into another electrical outlet.
• Is the scanner’s locking tab in the locked position? Slide the
locking tab to the unlocked position. If you tried to scan with the
scanner locked, you must restart your computer after unlocking the
scanner.
• Did you restart the computer after installing the software? If you
didn’t restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
12
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
Please see the Readme file in the PaperPort directory on your computer’s
hard drive. The Readme file contains additional information that may
help you diagnose problems connecting the scanner. Also see
“Troubleshooting” on page 52 for more information.
Note: The scanning lamp under the scanner’s glass needs to warm up
before you can scan. A status message lets you know when the lamp is
ready. The lamp then remains ready so you don’t have to wait each
time you want to scan. To conserve electricity and prolong the life of
the scanner, you can set the length of time for the lamp to remain lit
before powering down. See “Setting Preferences” on page 26.
To connect the scanner:
1. After checking for all the above problems, right-click the scanner
icon with the red X over it.
The shortcut menu appears.
2. Choose Connect from the shortcut menu.
The software finds the scanner and makes the connection. The
scanner icon will no longer have a red X through it, and you’re
ready to begin scanning.
If you try all the troubleshooting procedures described above and in the
Readme file, and the scanner icon still has a red X through it, you may
have a malfunctioning scanner. Please see “Contacting Visioneer
America Technical Support” on page 58 or “Contacting Visioneer—
International Technical Support” on page 59. Also visit our web site at
www.visioneer.com for additional technical information. You can also
receive software updates from the Windows Start menu by choosing
Programs, then PaperPort, then Check for OneTouch Updates.
THREE WAYS TO SCAN PAPER ITEMS
13
Scanning
THREE WAYS TO SCAN PAPER ITEMS
You can scan paper items by pressing a OneTouch button, by clicking a
button on the screen, or from the PaperPort software.
• Scan with the Scanner Buttons
Press a button on the scanner’s front panel.
• Scan from the Screen
Click the scanner icon on the Windows taskbar. A panel representing
the scanner buttons appears. Click a button on the panel.
• Scan from the PaperPort Software (or Other Twain Software)
Start the PaperPort software, then click the Twain icon on the
PaperPort Command Bar. You can also scan from other Twain
software. See “Scanning from the PaperPort Software” on page 29.
14
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
SCANNING PAPER ITEMS WITH THE ONETOUCH BUTTONS
Pressing a scanner button scans the item, and then sends the image
either to the printer or to a software application on your computer.
To scan by pressing a OneTouch button on the scanner:
1. Place an item to scan on the glass, face down, and align the edge of
the item with the arrow marker at the upper left corner of the glass.
2. Close the document cover and press one of the OneTouch buttons.
The scanner starts scanning the item. Messages just above the
Windows taskbar show the status of the scanning.
During scanning, the scan progress window shows a small copy of
the image, as illustrated by this example:
When the scan is complete, the scanned image appears in the
destination software, in this case the PaperPort desktop.
SCANNING PAPER ITEMS WITH THE ONETOUCH BUTTONS
15
ABOUT THE ONETOUCH BUTTONS
The OneTouch buttons are preconfigured for typical scanning tasks. To
change the settings for the buttons, see “About the Configuration
Dialog Box” on page 18.
The following table lists the OneTouch buttons’ preconfigured settings:
Button
Function
Preconfigured Settings
Scan
Scans the item as color page and displays it
in PaperPort
Email
Scans the item as a color photo and
attaches it to a new email message in your
email application
OCR
Converts the item’s text to black and white
word processing text, and displays it in a
word processing application
Copy/Print Prints the scanned item in black and white
on your printer/copier at the printer/
copier’s default resolution
Custom
Scans the item as a color photo and
displays it in an image processing
application
Note: If a button is not preconfigured, the Configuration dialog box
appears when you press that button so you can configure it manually.
For example, if your computer does not have email software installed,
the email button cannot be preconfigured.
16
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
SCANNING PAPER ITEMS FROM THE BUTTON PANEL ON
THE SCREEN
Scanning from the button panel on the screen is just like pressing a
scanner button, except you click the button on the screen. The scanner
scans the item, and then sends the image either to the printer, or to a
software application on your computer. This method of scanning is
especially helpful if the scanner is not located close to your computer.
To scan from the screen:
1. Place an item to scan on the glass, face down, close the document
cover, and click the scanner icon on the Windows taskbar.
The scanner button panel appears on the screen.
2. Click the button you want to use to scan.
The scanner starts scanning the item. When the scan is complete,
the scanned image appears in the destination application.
3. To close the button panel, click the scanner icon in the panel’s
upper left corner.
The icons on the buttons indicate the destination application for the
scanned image. For example, in the illustration above, the icon on the
email button is for the email application, MS Outlook. When you click
the email button, the item is scanned, and then MS Outlook opens. In
this case, the scanned image automatically becomes an attachment to
send with an email message.
A question mark icon on a button means your computer does not have
an application that corresponds to that button’s functions. For example,
if your computer does not have an email application, the email button
will have a question mark icon on it.
CONFIGURING THE SCANNER
17
CONFIGURING THE SCANNER
When you first connect your scanner to a computer, the scanner’s
software configures each OneTouch button with appropriate settings.
But, if you want to change the settings, you can reconfigure the buttons
by selecting new options from the Configuration dialog box. You
display the Configuration dialog box from either the shortcut menu or
the Button Panel.
To display the Configuration dialog box from the shortcut menu:
1. Right-click the scanner icon.
Scanner icon
The shortcut menu appears.
2. Choose Configure on the shortcut menu.
The Configuration dialog box appears. Click the tab that
corresponds to the button you want to configure.
18
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
To display the Configuration dialog box from the Button Panel:
1. Right-click the button you want to configure.
The Configuration dialog box appears. The tab for the scan button
you clicked is selected for you.
ABOUT THE CONFIGURATION DIALOG BOX
The Configuration dialog box shows the current settings for each
scanner button.
The tabs across the top of the dialog box correspond to the buttons.
Clicking a tab shows the current settings for the corresponding button
on the scanner.
For example, the highlighted selections in the following figure show the
current settings for the Custom button because the Custom tab is
selected. The Custom button is set up to scan the item with the
configuration named Photograph for Editing, and then after the
scanning is finished, to open Microsoft Paint to display the scanned
image. The Format and Page(s) setting is to scan as a bitmap for a single
page item.
CONFIGURING THE SCANNER
19
Click this
tab to set
preferences.
Click the tab
that corresponds
to the scanner
button you want
to configure.
Select a setting
for scanning
the item.
Select a software
application to
send the scanned
image to that
application.
Select format
and page(s)
options for the
button.
See “Setting Preferences” on page 26 to set Preferences.
The options on the Configuration dialog box are:
Select Destination—the list of applications that can open to display the
scanned image. Select the application that you want to automatically
open to display or process the scanned image.
Select Configuration—the list of the button’s scan configurations. The
configuration settings include: color, black and white, or grayscale,
resolution in dots per inch (dpi), page size, brightness, and contrast. To
see the details about a configuration, click its icon in the list. Click the
icon again to close the detailed information.
Clicking an icon expands
the configuration to show
its settings
20
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
Select Format and Page(s)—displays a set of options for selecting a
format for the scanned image and whether to scan a single page or
multiple pages. The formats are bitmap and PaperPort. Use PaperPort
for scanning any item. Bitmaps are usually for photos or artwork. The
page icons represent single or multiple page scanning.
Scan single page
Scan multiple pages
Scan multiple pages and
stack them on the
PaperPort Desktop
Options—displays a dialog box for selecting options about the
destination application for the scanned image. Each destination
application has its own options dialog box.
Folder Copy—displays a dialog box for selecting the folder to use for
storing copies of the scanned images.
GETTING HELP
You can get help with the scanner’s features or any of the options on the
Configuration dialog box using either of the following methods:
■
When the Configuration dialog box is displayed, press the F1 key on
your keyboard
■
Click the Help button at the top right corner of the Configuration
dialog box
Help button
CONFIGURING THE SCANNER
21
SELECTING NEW OPTIONS FOR THE BUTTONS
You can select a new destination application, configuration, and image
format for a scanner button to optimize it for the type of scanning you
want to do. You use the Configuration dialog box to select new options.
To select new options for a scanner button:
1. Display the Configuration dialog box.
Click the tab of the button whose options you want to change.
2. Scroll the list of applications in the Select Destination list and click
the new application you want to use to view and work with the
scanned image.
Note: If you select a word processing program such as Microsoft
Word and a configuration for OCR, text in scanned images is
automatically converted to editable text by the optical character
recognition software that you receive with the scanner. The converted
text then appears in the selected destination application.
3. Click a selection in the Select Configuration list to choose a new
scan configuration for the selected scanner button.
The configurations are preset for the application you select in the
application list. If you select another application, the configurations
are for that application.
4. Select one of the Format and Page(s) options for the button.
5. Click OK.
Now when you press the scanner button, it scans the image using
the new configuration settings and displays the scanned image in
the new destination application.
Note: If you want to scan using the Visioneer Scan Manager Pro,
click the option, Configure before Scan. Now when you press the
selected scanner button, the Visioneer Scan Manager Pro appears first
and you can use it to scan.
22
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
CREATING NEW CONFIGURATIONS
You cannot change settings such as brightness or contrast of the preset
configurations. To scan with settings other than those offered by the
preset configurations, you must first create a new configuration and
then use it to scan.
To create a new configuration click the New button. You can also click
Copy to copy a preset configuration, change its settings, and then save it
under a new configuration name. To see Help for creating a new
configuration press the F1 key on your keyboard.
ADJUSTING SCAN SETTINGS AND PAGE SETTINGS
When scanning using a configuration that you created yourself, you can
adjust that configuration’s scan settings and page settings. For example,
if the scanned image is too dark, you can adjust the brightness of the
scan setting.
Note: You cannot change the scan settings or page settings for any of
the predefined scan configurations. You can only adjust settings for
scan configurations that you create yourself. See the section above,
“Creating New Configurations”.
To adjust the scan settings and page settings:
1. Display the Configuration dialog box.
Click the tab of the button whose options you want to change.
CONFIGURING THE SCANNER
23
2. In the Select Configuration list, click the configuration that you
want to adjust.
For example, the following figure shows a configuration named
Special Scan for Dark Print (which you would have created earlier).
3. Click the Edit button.
The dialog box appears for adjusting the scanning settings of the
selected configuration.
24
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
4. Adjust the scan settings that you want.
Mode—Select Black/White to scan in black and white. For
example, letters and memos are usually scanned in black and white.
Select Grayscale to scan items such as documents containing
drawings or black and white photographs. The scanning produces
an image in varying shades of gray. Select Color to scan color
photographs and other color items.
Resolution—Drag the slider to the right or left to adjust the dots
per inch (dpi) of the resolution. The maximum resolution is 1200
dpi; the minimum is 50 dpi. The higher the dpi setting, the sharper
and clearer the scanned image. However, higher dpi settings take
longer to scan and produce larger files for the scanned images.
Brightness and Contrast—Drag the sliders to the right or left to
adjust the brightness and contrast of the scanned image. The
Contrast setting does not apply to the Black/White mode.
5. Click the Page Settings tab to adjust the scan page settings.
Page Size—Choose a page size from the drop-down list. The
outlines on the picture represent the various page sizes. Clicking
one of those outlines also selects it as the page size for the scan. If
you select the Custom option from the drop-down list, boxes
appear in place of the picture. Enter the horizontal and vertical page
dimensions in the boxes.
CONFIGURING THE SCANNER
25
AutoCrop—Select this option to let the scanner automatically
determine the size of the item being scanned. For example, if you
put a photo in the middle of the glass, the scanner will
automatically determine the size of the photo. When AutoCrop is
selected, the scanner makes two passes—the first pass senses the
item’s size, and the second pass scans the image. This option
overrides the Page Size menu selection.
DeScreen—Select this option when scanning a picture from a
newspaper or magazine article, or other items that contain images
with patterns or dots. Scans of patterns or dots sometimes have a
distorted or wavy appearance. The scanner scans the item to
compensate for the patterns and dots, and produces a clearer image.
The scanning may slow down a bit when this option is selected. You
don’t need to select this option when scanning photographs. The
DeScreen setting does not apply to the Black/White mode.
Gamma—Drag the slider to improve how the colors in a scanned
image look on your monitor. Gamma correction allows you to
achieve precise color matching. Because the computer cannot
always transmit the exact color information to the hardware, you
may have to make some color adjustments using the Gamma
feature.
The default Gamma setting works fine in most cases and normally
does not need to be adjusted.
6. Click OK.
The Configuration dialog box reappears. Make sure the
configuration you just defined is selected.
7. Click OK on the Configuration dialog box.
The new configuration and its adjusted settings now apply to the
button whose tab is selected at the top of the Configuration dialog
box.
Note: If you select the Copy/Print button, the dialog box for editing
and adjusting the settings will have a Device tab for selecting options
for a printer or copier. See the Help for more information.
26
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
SETTING PREFERENCES
The preferences apply to each button and to the scanner.
To set preferences:
1. On the Configuration dialog box, select the tab for a button to set
its preferences.
2. Click the Preferences tab on the Configuration dialog box.
Preferences tab
The Preferences dialog box appears. The dialog box shows which
button you selected for new preferences.
The name of the button to receive new preferences
If the Button tab on the Preferences dialog box is not selected, click
it.
Show All Destinations—Clicking this option automatically selects
all the destination applications categories. When you click the
button’s tab on the Configuration dialog box, its list of destination
applications include all of the applications on your computer that
CONFIGURING THE SCANNER
27
fall into these categories. For example, the destination applications
for the email button are usually email applications. By selecting the
Show All Destinations option as the preference for the email
button, all the other types of applications are included in the list of
email destination applications.
Select Destinations—Select this option to individually choose the
types of applications to include in the button’s list of destination
applications. Click in the boxes for the types of applications to
include in the button’s list.
Show Scan Progress Window—Select this option to see the
window that shows a rendition of the image during the scanning.
See the sample on page 14.
3. Click the General tab to set preferences for the scanner.
Show Status Window—Select this option to see the small window
at the bottom right corner of the screen that shows the status of the
scanning and other information as shown in this sample:
28
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
Show Scanner Icon in Windows Taskbar—Select this option to
see the small icon representing the OneTouch scanner in the
Windows taskbar.
Scanner icon
Scanner Lamp turns off—These options control when the scanner
lamp powers goes off.
After idling for xx minutes—Select this option to
automatically turn off the lamp if the scanner hasn’t been used
for the specified time. This option saves energy and extends the
lamp’s life. Click in the box and enter the number of minutes
for the lamp to remain idle before turning off. If you scan when
the lamp is off, it warms up before scanning resumes.
On System Standby/Shutdown—Select this option to turn off
the lamp when you turn off your computer, or when the
computer’s energy saver option automatically puts the computer
into standby mode.
Folder for Temporary Images—Click the Folder button and then
select a folder for the scanner’s temporary images. During scanning,
a temporary file contains scan information about the image.
Because temporary image files can sometimes be large, select a
folder that has sufficient disk space available.
4. Click OK.
SCANNING FROM THE PAPERPORT SOFTWARE
29
SCANNING FROM THE PAPERPORT SOFTWARE
Instead of using a scanner button, you can scan directly from the
PaperPort software. To scan transparencies you must scan from the
PaperPort software or other Twain software.
Note: You can also scan directly with other software that meets the
Twain standards for scanning, which includes many graphics and
imaging applications available for your computer. The following steps
explain how to set up and scan from the PaperPort software but you
use the same basic processes with other Twain software.
To scan from PaperPort, you must first do a one-time-only set up of the
software.
To set up the PaperPort software with the scanner:
1. If the PaperPort software isn’t currently running, double-click the
PaperPort icon on the Windows desktop to start it. The PaperPort
Desktop appears.
2. From the PaperPort File menu, choose Select Source. The Select
Source dialog box appears, and lists the Visioneer application (as
well as all other Twain devices installed on your computer).
3. Choose Visioneer Scan Manager Pro, and then click Select.
Note: You don’t need to set up the scanner again unless you change
the source to some other Twain device, such as a digital camera.
30
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
SCANNING AN ITEM WITH THE TWAIN BUTTON
The following steps explain how to scan an item using the Twain button
in the PaperPort software. You can scan many types of paper items, from
small business cards to A4-sized pages.
Note: Your Visioneer OneTouch scanner is initially set to scan from
the PaperPort software for color items. To scan a black-and-white or
greyscale item, select one of the other configurations from the Scan
Manager Pro’s list of configurations. To scan at a higher resolution for
a color image, select Color—Better Quality. However, scanning at a
higher resolution creates a larger file size and takes longer to scan. To
minimize the file size and the time required to get a better quality
scan, select just the area of the item that you want to scan.
To scan an item:
1. Open the scanner cover, place the item face down onto the lower
left edge of the scanner glass, and close the cover.
2. If PaperPort isn’t running, double-click the PaperPort icon on the
Windows Desktop to start it. The PaperPort Desktop appears.
3. Click the Twain icon on the Command Bar, or choose Acquire
from the File menu.
Note: You can also scan from other applications that have the Twain
capability. See the user’s guides that you received with those
applications for their specific steps to scan.
The Visioneer Scan Manager Pro appears.
SCANNING FROM THE PAPERPORT SOFTWARE
31
Choose a scanning option. Scan
Reflective Using is for scanning
paper items. The other options
are for transparencies.
Click an icon to select a
configuration—Color, Grey
Scale, or Black&White. This
example shows the Color/
Custom configuration is
selected. Clicking the “+” sign in
front of Custom shows
Custom’s scan settings as a list.
Click a setting in the list if you
want to change it. The setting’s
options appear on the right side
of the Scan Manager Pro where
you can select new options if
necessary.
Check the Scan Info to
make sure your computer
has sufficient space for the
image. Warning icons on
this box appear if your
computer does not have
enough space for the
scanned image’s file.
Click Preview to see what
the image will look like.
The Preview image appears in
the window.
If the image is what you
want, click Scan. If not,
adjust the settings or select
a new configuration and
click Preview again.
Click AutoScan to
scan with your preset
scan choices.
You can now scan manually by previewing the image and adjusting the
scan settings to your liking, or you can click AutoScan.
The AutoScan feature uses your preset scan settings and the scanner’s
automatic image analysis capabilities to find the optimum combination
of settings for the item you’re scanning.
Note: The appearance of the Scan Manager Pro window depends on
your computer monitor’s screen resolution. Therefore, what you see
on your computer screen may be slightly different than the examples
shown in this Guide.
32
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
To scan manually:
1. On the Scan Manager Pro, select a configuration for the scan.
For example, select Color Configurations and then select Custom
to scan a color item with the preset Custom scan settings.
That configuration’s settings appear as a list. Click the “+” sign to
see the full list of scan settings. Click the “-” (minus) sign to
collapse the list.
To see the settings for another configuration, click it in the list. For
example, to see the Grey Scale settings, click the Grey Scale
configuration.
2. Click the Preview button to preview the scanned image before
scanning it.
The scanner scans the item and displays a preview using the options
you selected.
3. Review the image to make sure it’s what you want.
4. To adjust one of the settings for the scan, click it in the list of
settings.
A panel appears on the right side of the Scan Manager Pro for that
setting. Select new options for the setting on that panel. See
“Adjusting the Settings on the Scan Manager Pro” on page 35 for
more about changing the scan settings.
5. (optional) To preview the image again, click the Preview button.
6. Readjust the settings if necessary.
7. When you’re satisfied with the image settings, click the Scan
button.
When the scan is complete, the scanner displays the final image as a
thumbnail on the PaperPort Desktop. If the item is scanned as a
bitmap image, a small bitmap icon appears in the lower left corner
of the thumbnail.
SCANNING FROM THE PAPERPORT SOFTWARE
33
Thumbnail
image
Bitmap icon
To scan automatically:
1. Click AutoScan.
The scanner uses your preselected resolution setting for the
configuration you selected. See “Setting Preferences” on page 49 to
set the AutoScan settings.
In addition, your OneTouch 9000 scanner has built-in image
analysis capabilities that find the optimum combination of settings
for the item you’re scanning. When you click AutoScan, the scanner
analyzes the image and adjusts the settings to produce the optimal
scanned image.
The following dialog box appears while the scan is in progress.
Checkmarks indicate that phase of the process is finished.
34
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
The autoscanned image appears as a thumbnail on the PaperPort
Desktop.
2. Use the PaperPort software to work with the image.
Please see the PaperPort Getting Started Guide and PaperPort User’s
Guide on the CD for more information about using the PaperPort
software.
GETTING HELP WITH THE PAPERPORT SOFTWARE
The PaperPort software includes a complete set of help topics that
answer questions about each feature of the software.
■
To see help information, press the F1 key, or from the Help menu,
choose PaperPort Help Topics to display the Help Topics window.
Tip: Also see the technical support card included with your scanner.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
35
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
You can adjust the scan settings on the Visioneer Scan Manager Pro to
produce the best possible image.
To adjust a setting:
1. Click a setting in the list of settings, or click its corresponding
button on the right side of the Scan Manager Pro.
Resolution and Sharpen
Brightness and Contrast
Color (Gamma, Saturation,
and Hue)
Scan Size
Note: The list of scan settings for a configuration only apply to that
type of configuration. For example, the Black&White configuration
does not have a setting for adjusting the Color Hue.
The following figure shows an example of the Scan Manager Pro if
you click the Resolution setting in the list, or click the Resolution
and Sharpen button.
36
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
Click to close the settings panel
Note: The information in the scan settings list and the options that
you select on the various settings panels are interactive. That is, as you
change the settings on the panel, the numbers in the list on the left
also change.
SAVING A NEW PROFILE
If you adjust the scan settings you can save them as a profile for later use.
To save a new profile:
1. Select a configuration on the Scan Manager Pro, such as Color/
Custom.
2. Adjust the settings that you want for later use.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
37
3. Click Save As.
The Save Profile dialog box appears.
4. Type a name for the new profile.
5. Select the options you want:
■
Store the custom output image size in this Profile—you can
create a custom image size as part of the settings; if you adjusted
the output image size for the selected configuration, that output
image size is saved with this profile. See “Saving a Custom Size”
on page 47 for more about a custom image size.
■
Save the custom Response Curve and store it in this profile—
you can also create custom settings for the colors of a scanned
image. Those color settings are called the Response Curve. Select
this option to save the response curve settings with this profile.
See “Adjusting Gamma, Saturation, and Color Hue” on page 41
for more about the response curve settings.
6. Click OK.
Your new profile is now listed as one of the configurations. Select it
when you want to reuse its settings.
38
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
ADJUSTING THE RESOLUTION AND SHARPNESS
Resolution determines the amount of detail you can see in the scanned
image. The resolution setting for the scan is in dots-per-inch (dpi). The
higher the resolution, the finer the details, however, higher dpi settings
also produce larger files sizes. Usually the higher resolution settings are
used for precision work, such as photographs or fine artwork.
Sharpness determines the amount of blur in an image. Your scanner can
sharpen an original blurred image by adjusting the blurry edges in
sections of the image.
The following figure shows the resolution and sharpen options:
Reminder: The location of various buttons on the panels may be
slightly different on your Scan Manager Pro window because the
appearance of the window depends on you computer monitor’s screen
resolution.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
39
To adjust the resolution and sharpness:
1. To use one of the preset resolutions for typical scanned items, click
one of the options in the list.
For example, to set the resolution for scanning a business card,
select Business Card. That setting is preset to read small print on a
typical business card.
2. To set the resolution manually, drag the Resolution slider to the left
to decrease the resolution or to the right to increase it.
3. To adjust the sharpness, drag the Fidelity slider to the left to
decrease the sharpness or to the right to increase the sharpness.
You can also type a number directly into the sharpness setting box,
or click the up and down arrows next to the box to increase or
decrease the setting.
To return the settings to their original amounts, click Reset.
The resolution and sharpen panel also includes an advanced setting for
Moire patterns. Moire patterns are wavy, rippled lines that sometimes
appear on the scanned images of photographs or illustrations,
particularly newspaper and magazine illustrations. To scan the image
and limit or eliminate the amount of moire patterns, select the Reduce
Moire option.
ADJUSTING THE BRIGHTNESS AND CONTRAST
Sometimes an item is scanned with the brightness and contrast set to be
too light or too dark. For example, a note written with a light pencil
may need to be scanned darker to improve legibility.
The histogram shows the amount of the image (that is, the number of
pixels) at different brightness levels. From left to right, the histogram
indicates dark to light. To see this visually, drag the Brightness slider
back and forth and watch how the distribution of pixels changes to
indicate a darker or lighter image.
40
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
The following figure shows the brightness and contrast options:
To adjust the brightness and contrast:
1. Drag the Brightness slider to the left to make the item darker or to
the right to make the item lighter.
You can also type a number directly into the brightness setting box,
or click the up and down arrows next to the box to increase or
decrease the setting.
2. Drag the Contrast slider to the left to decrease the contrast or to
the right to increase the contrast.
The Histogram represents the settings as you drag the sliders.
For color scan configurations you can adjust the brightness and
contrast using a single color, or all together, by choosing from the
drop-down menu at the top of the Histogram.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
41
For example, if you select Red from the menu and drag the
Brightness and Contrast sliders, you can see how the red
component of the histogram changes. Note, however, that the
Green and Blue components also change relative to those new
brightness and contrast settings.
3. Click the Auto button to have the scanner analyze the image and
set the appropriate brightness and contrast.
You can also adjust the brightness and contrast by sampling portions of
the image in the preview window. The three Sampler buttons
correspond to the Black, Mid tones, and White portions of an image.
To use the Sampler buttons:
1. Click one of the buttons.
The pointer automatically moves onto the image and becomes a
sampler pointer.
2. Place the pointer on the portion of the image for that sample and
click.
For example, if you selected the Black sampler button, place the
pointer on the blackest part of the image.
3. Repeat with each of the other Sampler buttons.
4. Click Adjust.
The image changes to show your new settings.
If the image is not what you want, click Reset to return the image
to its original brightness and contrast.
ADJUSTING GAMMA, SATURATION, AND COLOR HUE
If you’re using the Color Configuration to scan, you can adjust a group
of color settings. Gamma controls the brightness of the midtones of the
color, saturation is the strength or purity of a color, and hue is the color
your eyes see as reflected from the image. These color settings are
represented by a response curve.
42
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
The horizontal axis of the response curve represents the original settings
of the image, and the vertical axis represents new settings. Thus, the
curve is a straight line from the lower left to upper right for an original,
unchanged image. To see how the response curve indicates changes, drag
the Gamma slider to left and right.
The following figure shows the color options:
To adjust the color settings:
1. From the Channel drop-down menu, choose the individual color
(Red, Green, or Blue) that you want to use as the basis for adjusting
the image, or choose All to adjust them together.
2. From the Edit Style drop-down menu, choose the type of color
editing that you want to use:
■
Gamma—the response curve changes as you change the gamma
setting; you can also change the saturation and hue settings.
■
Freestyle—you can drag points and sections of the response
curve to create interesting and unusual color effects. Put the
pointer on the curve and drag left, right, up or down. The image
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
43
changes its colors in response to the new curve. The x and y
numbers at the bottom of the response curve indicate the exact
position of the pointer on the curve. The Gamma slider remains
fixed when you use the Freestyle option.
3. Drag the Gamma, Saturation, and Color Hue sliders to the left to
decrease the settings or to the right to increase the settings.
You can also type a number directly into the setting boxes, or click
the up and down arrows next to the boxes.
4. Click Reset to return the settings to their original numbers.
The upper Reset button is for the gamma setting, the lower one is
for saturation and hue.
5. To save the settings of a response curve, click Save.
Saving is available for settings created with the Freestyle editing
option so you can load and reuse the exact settings on other images.
This is especially helpful for complex Freestyle response curves.
A dialog box appears that lists the names of previously saved
settings. Type a name for your new settings and click OK.
6. To reuse a saved response curve setting, click Load.
A dialog box lists the names of your previously saved settings. Select
the one you want and click OK.
ADJUSTING OUTPUT SIZE
The item you’re scanning may not fill the scanner glass. In that case you
can preview the item and use the Auto Trim option to automatically
eliminate the unwanted sections of the image.
You can also adjust the output size to scan only specific sections of an
image. For example, if you’re scanning a photograph and want to focus
on one section, adjusting the output size removes the rest of the
photograph from the final scanned image.
44
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
The following figure shows the output size options:
To Auto Trim an item:
1. Click Auto Trim.
2. Click Trim.
The scanner senses the edges of the item on the glass and draws a
dotted line around the image in the window.
Check to make sure the dotted line encloses the image that you
want.
A new Scan Info box on the lower left portion of the Scan Manager
Pro shows the information for the autotrimmed area.
3. If the dotted line is not exactly where you want it, put the pointer
on the line and drag the mouse.
For example, if you want the scan to include a border around the
image, you can drag the dotted line to be slightly larger than the
autotrimmed area.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
45
To use the pointer to drag the line, make sure the pointer button is
selected at the top of the window.
4. When the trimmed area is what you want, click Scan.
To manually set the output size for an item:
1. To scan the entire item on the glass, click Same as Original. No
sections are trimmed.
2. To set the output size yourself, click Same as Original to remove
the checkmark.
The settings for the output size become active.
3. Put the pointer on the image and drag the mouse to enclose the
section you want in the scanned image.
As you drag the mouse, a dotted box appears on the image and the
size settings change to reflect the new output size area. You can also
type in the size settings boxes.
■
Width and Height—the measurements of the final image after
it’s scanned; for example, if you plan to print the image on a
typical piece of paper, the width and height are 8.5 and 11.0
inches
■
Units—units of measurement for the new area; click the dropdown arrow and choose new units if you want
■
Resolution—the dots-per-inch (dpi) setting for the new area
■
Scale—the amount of enlargement or reduction of the image to
fill the width and height measurements; for example, if you select
a small area and have set the width and height to a paper size, the
scale automatically increases to enlarge the small image so it’s the
same size as the paper
A new Scan Info box on the lower left portion of the Scan Manager
Pro shows the information for the new area.
You can select multiple areas. A new Scan Info box appears for each
one.
The following figure shows an example of a manually selected area.
46
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
Note: When you manually select an area, the settings on the other
panels are for that selected area, not the whole image. For example,
the histogram on the resolution panel and the response curve on the
brightness and contrast panel refer to only your newly selected area.
A new Scan Info box for the
area selected on the image.
The area you selected to scan.
4. If the dotted line is not exactly where you want it, put the pointer
on the line and drag the mouse.
To use the pointer to drag the line, make sure the pointer button is
selected at the top of the window.
5. To rotate the selected area 90 degrees, click Rotate 90 Degrees.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
47
6. To maintain the selected area’s length-to-width relationship (known
as the aspect ratio), click Maintain Aspect.
Note that as you rotate the area or maintain its aspect ratio, the
width and height measurements change to reflect the new
orientation of the image.
7. When the settings are what you want, click Scan.
8. If you want to remove the selected area and start over, click Remove
on the Scan Info box.
SAVING A CUSTOM SIZE
If you have several items of the same size, such as a group of small
photographs, you can create a custom size and reuse it whenever
scanning those items.
To save a custom size setting:
1. Click Add under the list of sizes.
The Add Size dialog box appears.
2. Type a name and dimensions for the size.
3. Click OK.
The new custom size is now listed in the box at the top of the panel.
Select it in the list to automatically reuse the custom size.
48
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
THE SCAN INFO BOX
The following figure shows the information on the Scan Info box:
Physical size of the
image to scan.
Location of the top
left corner of the
image in the
Preview window.
Current location of
the pointer as you
drag it on the
Preview window.
Size of the file of
the scanned image
Amount of space
on your computer’s
hard drive.
ZOOMING IN AND OUT
You enlarge or reduce the preview image by zooming in or out.
To enlarge and reduce the preview image:
1. Click the Zoom button.
2. Put the pointer on the image.
3. Click the left mouse button to zoom in (enlarge).
4. Click the right mouse button to zoom out (reduce).
5. To return the image to its full size, click the Pointer button directly
above the Zoom button, put the pointer on the image and click the
right mouse button. Select Show Full Image from the pop-up
menu that appears.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
49
SETTING PREFERENCES
You can set preferences for the Scan Manager Pro and scanner that are
independent of the preferences for the PaperPort software.
To set the Scan Manager Pro preferences:
1. Click the Preferences button.
The User Preferences dialog box appears.
2. Select the preferences you want:
■
Enable selection of color bitdepths...—your OneTouch 9000
scanner supports a tremendous range of colors (defined as 48-bit
depth enhanced color), but other devices (called the TWAIN
clients), such as older cameras that you can use with the Scan
Manager Pro support only a 24-bit depth range of colors. Select
this option to automatically allow the Scan Manager Pro’s color
settings to support more than a 24-bit depth if the other devices
also support the greater range of colors. Then, when you open
the Scan Manager Pro from other applications, options for bit
depth include the higher settings.
50
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
■
Do not wait for the Lamp...—when you first start scanning, the
lamp in the scanner warms up slowly. This helps extend the life
of the lamp. However, if you want the lamp to come on
immediately without warming up. select this option.
■
Show standard metric paper sizes—select this option if you use
metric paper to print images. When you select the scan size
output options, the width and height dimensions are then for
metric paper sizes.
■
Show standard US paper sizes—select this option to set the
paper sizes for standard US paper.
■
Units—select the measurement units for the ruler around the
preview window. The x and y coordinates of the pointer position
are relative to the units.
■
AutoScan Resolution—you can scan an item by clicking the
AutoScan button on the Scan Manager Pro. The scanner uses
these resolution settings for the respective configurations: Color,
Grey Scale and Black and White.
■
Folder for Temporary Images—when you scan an item, its
scanned image is initially stored in a folder before being sent to
the PaperPort Desktop or some other application. Instead of
using the default folder specified by the Scan Manager Pro, you
can select another folder on your computer. Usually the only
reason to select this option is if the default folder is on a hard
disk with limited storage space. Click the folder icon and the
Browse for Folder dialog box appears. Select the folder you want
to use and click OK. That folder name is then listed on the
Preferences dialog box.
3. Click OK to save your preferences.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO
51
GETTING HELP WITH THE SCAN MANAGER PRO
The Scan Manager Pro has its own help system, separate from the
PaperPort software help system.
To see the Scan Manager Pro help information:
1. Click the Help button.
The Help dialog box appears.
2. Scroll to see the help information.
3. Click the drop-down menu to see additional topics. Choose Home
from the menu to return to the first page of help.
4. To exit the help system, choose Exit from the drop-down menu, or
click Exit at the bottom of the page.
52
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
TROUBLESHOOTING
In addition to the troubleshooting information contained in this
section, please see the Readme file in the PaperPort directory on your
computer’s hard drive. The Readme file contains additional information
that may help you diagnose problems with the scanner.
If you try all the troubleshooting procedures described in this section
and in the Readme file, and the scanner still has problems, you may
have a malfunctioning scanner. Please see the technical support card
that you received with your scanner for technical assistance telephone
numbers. Also visit our web site at www.visioneer.com for additional
technical information.
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible problems:
• Is a cable loose or not plugged in securely? Inspect all cable
connections. Make sure all the cables are plugged in securely.
• Is the scanner’s status light on? If the light is not on, plug the power
supply into another electrical outlet.
• Is the scanner’s locking tab in the locked position? Slide the
locking tab to the unlocked position. If you tried to scan with the
scanner locked, you must restart your computer after unlocking the
scanner.
• Did you restart the computer after installing the software? If you
didn’t restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
• Did you select another Twain source for acquiring images? If you
use multiple Twain devices with your computer, you may have
selected another source for images. Start the PaperPort software and
choose Select Source from the File menu. Choose Visioneer Scan
Manager Pro and click Select.
CLEANING THE SCANNER GLASS
53
Problem: During installation I got the error message: PaperPort
Installation is not complete. What do I do?
The installation procedure was not successful. You need to reinstall the
PaperPort software.
Problem: I got the error message: PaperPort cannot allocate enough
memory to perform internal critical operations. What do I do?
Close any other active applications so that additional memory is
available. If you click Continue, PaperPort moves the file to the
PaperPort data directory and renames the file with the prefix “bad.” This
allows you to recover the file later.
To recover the file, you can import it into PaperPort by using the Import
command in the File menu.
Problem: How do I uninstall PaperPort?
See the section, “How to Uninstall Your Scanner” on page 54.
Uninstalling does not delete your scanned items, and they remain in the
PaperPort Data folder.
CLEANING THE SCANNER GLASS
Scanning items that have excessive amounts of dirt or dust may dirty the
glass. To ensure the best quality scanned item, wipe the scanner glass
with a soft clean cloth to rid the glass of dust or other debris.
54
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
HOW TO UNINSTALL YOUR SCANNER
To uninstall the Visioneer OneTouch 9000 scanner, you remove the
OneTouch Version 3.0 software first, and then remove the PaperPort
software, or other software you installed for the scanner.
STEP 1: UNINSTALLING THE VISIONEER ONETOUCH SOFTWARE
FOR WINDOWS 98, 98 SE, AND ME:
1. Click Start on the Windows Taskbar.
2. Choose Settings then Control Panel from the menu.
3. Double-click the Add/Remove Programs icon.
The Add/Remove Programs Properties window appears. Make sure
the Install/Uninstall tab is selected.
4. Scroll the menu of software and select OneTouch Version 3.0.
5. Click the Add/Remove button.
The Select Uninstall Method window appears.
6. Make sure the Automatic option is selected.
HOW TO UNINSTALL YOUR SCANNER
55
Important: The Automatic option is selected by default. Visioneer
recommends using the Automatic option. The other options are for
advanced users only.
7. Click Next.
The Perform Uninstall window appears.
8. Click Finish.
The Visioneer OneTouch software is uninstalled from your
computer. The status light on the scanner turns amber indicating
that the scanner and computer are no longer communicating.
9. If the Remove Shared Components window appears, Visioneer
recommends selecting No to All.
10. Unplug the power to the scanner and remove its USB cable from
your computer.
11. Close the Add/Remove Program Properties window and the
Control Panel window.
12. Restart your computer.
FOR WINDOWS 2000 AND XP:
1. Click Start on the Windows Taskbar.
2. For Windows 2000 choose Settings then Control Panel from the
menu.
For Windows XP, choose Control Panel from the menu.
3. Double-click the Add/Remove Programs icon.
The window that appears is named Add/Remove Programs
(Windows 2000) or Add and Remove Programs (Windows XP).
4. In the left column of the window, make sure the Change or
Remove Programs option is selected.
5. Select the icon for OneTouch Version 3.0.
56
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
6. Click the Change/Remove button.
If two buttons appear instead of a single Change/Remove button,
click Remove.
The Select Uninstall Method Window appears.
7. Make sure the Automatic option is selected.
Important: The Automatic option is selected by default. Visioneer
recommends using that option. The other options are for advanced
users only.
8. Click Next. The Perform Uninstall window appears.
9. Click Finish.
The Visioneer OneTouch software is uninstalled from your
computer. The status light on the scanner turns amber indicating
that the scanner and computer are no longer communicating.
10. Unplug the power to the scanner and remove its USB cable from
your computer.
11. Close the Add or Remove Programs window and the Control Panel
window.
12. Restart your computer.
HOW TO UNINSTALL YOUR SCANNER
57
STEP 2: UNINSTALLING THE PAPERPORT SOFTWARE
1. Click Start on the Windows Taskbar.
2. Choose Settings then Control Panel from the menu.
3. Double-click the Add/Remove Programs icon.
Windows 98, 98SE, or ME: The Add/Remove Programs Properties
window appears. Make sure the Install/Uninstall tab is selected.
Windows 2000 or XP: The Add or Remove Programs window
appears. Make sure the Change or Remove option is selected in the
left column.
4. Scroll the menu of software and select PaperPort 7.02.
5. For Windows 98, 98SE, or ME: Click the Add/Remove button.
For Windows 2000 or XP: Click the Change/Remove button.
The PaperPort Uninstall window appears.
6. Carefully read the Warning information. Click Next.
7. If the Remove Shared Files window appears, select No to All.
Important: Visioneer recommends choosing No to All. Removing
shared files could cause other applications not to run correctly
The PaperPort software is removed. A message then appears
offering to keep or remove your scanned image files currently stored
on the computer.
8. Click the No to keep your image files, click Yes to remove the image
files from your computer permanently.
Important: Files created by PaperPort are in a proprietary format
(with a .max extension) and cannot be opened by other applications.
If you decide to keep your scanned image files and want to be able to
view them, you can use the PaperPort Viewer instead of the PaperPort
application. Download the viewer from Visioneer’s Web site at
www.visioneer.com
You may see a note about missing software. Click OK.
58
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
9. For Windows XP: Click Finish.
10. Close the Remove Programs From Your Computer window. Close
the Control Panel.
11. Restart your computer.
CONTACTING VISIONEER AMERICA TECHNICAL SUPPORT
Visioneer provides technical support to all registered users in English
and French. Please see the chart below for contact telephone numbers.
For Latin America, call our U.S. Technical Support (1-541-884-5548).
Visioneer offre un l’assistance technique à tous les utilisateurs enregistrés
en anglais et français.
Pour l’assistance technique en français, veuillez appeler le numéro
suivant (1-416-640-7256).
Visioneer brinda apoyo técnico, a todos los usuarios registrados, en
inglés y francés. Consulte el cuadro, más abajo, para obtener el número
de teléfono correspondiente a su país.
Usuarios en Latinoamérica, sírvanse llamar al teléfono de apoyo técnico
en los EE.UU (1-541-884-5548).
Support by Telephone in the US
(8:00 am - 5:00 pm Pacific Time, Monday-Friday)
Long distance charges may apply
(541) 884-5548
Support by Telephone in Canada
(8:00 am - 5:00 pm Pacific Time, Monday-Friday)
Long distance charges may apply
(416) 640-7256
Free Support on the Web
www.visioneer.com
Free 24-hour Automated Expert System
(888) 887-0092
(Toll Free)
Support by Fax
(541) 884-8474
Express Telephone Support
(8:00 am - 5:00 pm Pacific Time, Monday-Friday)
(900) 776-5724
(Nominal per-minute fee)
CONTACTING VISIONEER—INTERNATIONAL TECHNICAL SUPPORT
59
CONTACTING VISIONEER—INTERNATIONAL TECHNICAL
SUPPORT
Visioneer provides technical support to all registered users in English,
French, and German. Please see the chart below for contact telephone
numbers.
Visioneer offre une assistance technique à tous les utilisateurs enregistrés
en anglais, français, et allemand. Reportez-vous aux numéros de
téléphone listés dans le tableau ci-dessous.
Visioneer bietet allen registrierten Benutzern technische Unterstützung
auf Deutsch, Englisch, und Französisch. Die Kontakttelefonnummern
können Sie der folgenden Tabelle entnehmen.
Country
Telephone
Monday - Friday
UK
0870 161 3003
Germany
0180 5 103 003
Rest of Europe
00 31 30 6026273
Visit www.visioneer.com for Fax information.
Important: Information about contacting Visioneer is subject to
change. Please visit our Web site at www.visioneer.com for the latest
details.
60
VISIONEER 9000 USB SCANNER INSTALLATION GUIDE
VISIONEER PHOTOPORT 9000 USB SCANNER
SPECIFICATIONS
Bit Depth
Scanning resolution
Maximum Item sizes
Scanner dimensions
Height
Width
Length
Weight
USB Standard
Operating temperature
Relative humidity
Power supply
Input voltage/frequency
Output voltage/watt
Safety and agency certifications
Hardware warranty
48-Bit color (internal), 16-Bit gray
(internal), 1-Bit line art/text
Optical resolution: 1200 x 4800 dpi
8.5 x 11.69 inches (21.6 x 29.7 cm)
2.6 inches (6.6 cm)
11.9 inches (30.0 cm)
17.0 inches (43.0 cm)
5.0 pounds (2.32 kg)
USB 1.1 and USB 2.0
50°–104° F (5°–35° C without
condensation)
20%–80% (@35° C without
condensation)
100 Vac, 50/60 Hz (Japan)
120 Vac, 60 Hz (North America)
230 Vac, 50 Hz (Europe)
12 V DC, 15 watt maximum
UL, ULc, GS, FCC Class B,
VCCI Class 2, CE
One-year limited warranty
INDEX
INDEX
A
adjust appearance panel 40
adjust output size panel 44
adjust response curve panel 42
adjust settings on Scan Manager Pro 35–47
aspect ration 46
Auto Trim 43, 44
AutoCrop 25
AutoScan 31, 33
resolution 50
B
bitdepth 49
bitmap 20
icon 32
black&white 24
blurred image 38, 39
brightness 24, 39
sampler 41
C
CD
other software 9
CD-ROM drive 4
channel menu 42
color 24, 37
bitdepth 49
histogram 40
options 42
color channel 42
color hue 41
computer restart 52
Configuration dialog box 18
configuration settings 19
contrast 24, 39
sampler 41
copier device tab 25
copy/print button 15
custom button 15
custom size image 47
D
DeScreen 25
destination application 19
OCR 21
options 20
device tab 25
distorted image 25
dots-per-inch 24, 38
E
email button 15
energy saver 28
F
fidelity 39
folder copy 20
folder for images 28
freestyle 42
G
gamma 41, 42
gamma, color 25
general preferences 27
greyscale 24
H
hardware requirements 1
help 20, 22, 34, 51
help button 51
help information 52
histogram 39, 40
I
image
aspect ratio 46
custom size 47
rotate 46
select area 44
temporary folder 28
zoom in and out 48
image blur 38, 39
image folder 50
image output size 43
manual selection 45
61
image preview 32
image scale 45
image size 37
item size 25
R
L
S
locking tab 7
M
moire patterns 39
monitor 4
N
new configuration 22
new profile 36
O
OCR 21
word processor 21
OCR button 15
OneTouch buttons
configuration settings 19
configure 17
configure before scan 21
preferences 26
select new options 21
optical character recognition. See OCR
P
page icons 20
page size 24
paper size 50
PaperPort
help topics 34
install 5
page format 20
scan from 29
PaperPort Desktop 33
patterns on picture 25
preferences 49
preferences tab 26
preview image 32
printer device tab 25
resolution 24, 38, 45, 50
response curve 37, 41
rotate image 46
sampler buttons 41
saturation 41
save profile dialog box 37
scale 45
scan brightness 24
scan button 15
scan contrast 24
scan from PaperPort 29–34
scan info box 48
Scan Manager Pro
adjust settings 35
new profile 36
sample 30
scan from 32
Scan Manager Pro preferences 49
scan mode 24
scan page size 24
scan resolution 24
scan text 21
scanner
connecting 7
lamp warm-up 12, 50
locking tab 7
scanner icon 17
scanner lamp 50
idle time 28
scanner paper size 50
scanner preferences 26
select format and page(s) 20
select source 29
sharpness 38
shortcut menu 17
system requirements 4
T
technical support 52
text conversion(OCR) 21
INDEX
thumbnail image 32
Twain applications 29
Twain button 30
V
Visioneer Web site 52
W
wavy appearance 25
Web site for help 52
word processor
OCR 21
Z
zoom image 48
63
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement