Night Vision Camera

VBC-800PI30-WC

VBC-800NI30-WC

User Guide

4. Parts description

Sunshield

Camera

Mounting holes

Bracket

5. Installation

1.

2.

Fix the mounting bracket to the wall as below figure.

Connect the camera with DC12V adapter(-+) and video output connector, power up and a video picture will be seen at the monitor.

VIDEO

12VDC

(Optional)

NIGHT VISION CAMERA 4

1. Features

The camera adopt 1/3" SUPER HAD Ⅱ CCD

and advanced Digital Signal Processor (DSP)

technology, Enhances picture quality greatly to a horizontal resolution of 540TVL, provides clearer and more vivid image.

Integrates vari-focal lens allows for versatile utilization.

The camera provides automatic mode change over by sensing day or night conditions. It can change color mode in the day condition to optimal color and B/W mode in night condition for clear identification.

( Only the IR Cut filter removal Day/Night Camera)

Integrated efficient powerful IR LED array can capture high-resolution picture even in complete darkness. Night view distance up to 25~30m.

Light control design. Auto light detection for IR

LED switch control and constant current; It is reported on light stability.

Exquisite design for circuit and structure, incarnates high technology.

Aluminum structure, all-sealed water proof body.

Outdoor sunshield housing available.

NIGHT VISION CAMERA 1

2. Caution

Do not disassemble or modify the camera to avoid possible fire, electric shock or other hazard Please refer repairs or service to a qualified service technician.

Take care when installing the camera. Avoid scratching the front glass window.

Avoid Shock, Vibration. Do not install the camera on an unstable surface. It can be damaged by improper use or storage.

Never point the camera towards direct sunlight or other sources of bright light in order to avoid a dimmer image due to too much backlighting or causing smear.

Use the camera within the published

temperature, humidity, and electrical ranges.

Provide ample slack in the video and power cables once the camera is installed in its final position.

Request for service by a qualified technician if the camera malfunctions or generates excessive amounts of heat.

NIGHT VISION CAMERA 2

6. Adjustment

Adjust varifocal lens according to the application.When adjusting, the lens should be dismantled carefully by professional installer.

1.

2.

3.

Screw off the camera's back cover .(Figure 1)

Use a right-angled screwdriver to insert the

View Angle or Focus adjustment groove , and adjust the View Angle or Focus respectively to get a fine image effect. (Figure 2)

After adjustment finished, gyre the back cover, and cover the sunshield on the camera.

(Figure 3)

Focus adjustment

View Angle adjustment

Figure１ Figure２

Figure３

NIGHT VISION CAMERA

5

7. Specifications

Model

Image Sensor

Signal System

Effective Pixels

Resolution

Minimum Illumination

Shutter Speed

S/N Ratio

White Balance

AGC/BLC

Gamma Correction

Sync Model

Lens

VBC-800PI30-WC

1/3'' SUPER HAD II CCD

PAL

752(H)x582(V) 768(H)x494(V)

540TV Lines(Color), 600TV Lines(B/W)

0.1Lux/F1.2(IR LED OFF), 0Lux (IR LED On)

1/50-1/100,000SEC 1/60-1/100,000SEC

More Than 50dB

Automatic

Automatic

0.45

INT

Varifocal lens, f=4-9mm

VBC-800NI30-WC

NTSC

IR LED

IR Beam Distance

IR LED Drive

Video output

Pow er Input

Wave Length 850nm, x 36pcs IR LED

25~30m

On: 1~3Lux; Off: 5~6Lux

1.0Vp-p, 75Omh, Sync Negative Polarity

DC12V Regulated

Pow er Consumption 150mA(IR LED OFF)+280mA(IR LED ON)

Operating Temperature -10℃ ～ +50℃, RH90% MAX (non-condensing)

Body

Weight

Aluminum

1000g

All data and specifications subject to change without notice.

NIGHT VISION CAMERA 6

3. Accessories list

Unpack the camera carefully and make sure that all accessories are included for the installation.

2

3

No.

1

4

Items

Camera

Sunshield

Instruction

Screws

Quantity

1 PCS

1 PCS

1 PCS

1 Bag

If any parts are missing, please contact your distributor for assistance.

NIGHT VISION CAMERA 3

8. Type Number Overview

Model VBC-800PI30-WC

Signal system PAL/12VDC

VBC-800NI30-WC

NTSC/12VDC

9. Dimensions

284

NIGHT VISION CAMERA 7