dear customer, Congratulations on your purchase of a Candle Impressions® product. Our products will help to enhance the beauty of your home and provide many years of enjoyment. Candle Impressions® offers a wide selection of lighting products of the highest professional quality. battery installation 1. To open battery compartment, turn the candle upside down, push clip inward and pull up. C OV E R O F B ATTE RY C O M PA RTM E NT 2. Insert 2 “D’’ type batteries into the compartment in the correct polarity as shown (ill.1). 3. Close the battery compartment lid. D B ATTE R I E S Please note: To achieve maximum battery life (up to 1,000 hours of candlelight), use 2 ‘’D’’ type Alkaline batteries (sold separately). Please note: Anytime the GREEN button is pressed, the current timer settings will be terminated. OPTION B — 24-HOUR TIMER MODE WITH PROGRAMMABLE AUTO SHUT-OFF (1 TO 23 HOURS) 1. At your desired Start Time, press and release the GREEN button to turn the candle ON. 2. Press and hold down the GREEN and WHITE buttons simultaneously for 6 seconds until the candle blinks.(During this 6-second period, the candle will turn OFF). 3. Count the number of blinks near the top of candle; each blink represents a one-hour duration of candle “ON” time. For example, 3 blinks indicate that the candle will stay on for 3 hours before the candle will automatically turn OFF. 4. Release the GREEN and WHITE buttons simultaneously when the number of blinks equals the desired number of candle “ON” hours. IMPORTANT: If the bottom INDICATOR LIGHT (between the buttons) is flashing, you have successfully turned on the Programmable Timer to your desired time. TO CHANGE THE DAILY START TIME IN PROGRAMMABLE TIMER MODE Please follow the 4 steps immediately above. IMPORTANT: If you wish to revert to a constant ON position, simply refer to the ON/OFF MODE at the beginning of the instructions. ill.1 GREEN BUTTON TO CHANGE THE DAILY START TIME IN 5-HOUR AUTO SHUT-OFF MODE Please follow the previous two steps. INDICATOR LIGHT WHITE BUTTON Anytime the GREEN button is pushed, the current timer settings will be terminated. caution on/off mode 1. To turn the candle ON: Press and release GREEN button. 2. To turn the candle OFF: Press and release GREEN button. timer instructions This candle has two timer functions, providing you with the flexibility to turn the candle ON at the same time each day for either 5 hours or for your choice of 1 to 23 hours — Programmable (See instructions below). In either timer mode, if the settings have not been modified, the candle will automatically turn back on again each day, at the pre-set Start Time that you have chosen. OPTION A — 24-HOUR TIMER WITH 5-HOUR AUTO SHUT-OFF 1. At your desired Start Time, press and hold the GREEN button for 3 seconds until the top of candle blinks once. 2. Release the button. IMPORTANT: If the bottom INDICATOR LIGHT (between the buttons) is flashing, you have successfully turned on the 5-Hour Timer to your desired time. Please note: The color intensity and shade may vary from candle to candle. Also, due to various environmental factors the wax color may change or fade over time. candle maintenance To clean your candle, use a soft, dry cloth. CUSTOMER SERVICE E: customerservice @niinorthern.com T: 1.888.867.6095 Patented technology; US Pat. 6,616,308, 7,118,243 and Canadian Pat. 2,456,160; PRC ZL03272615.5 | ROC M240516 Other patents pending | Made in China INST-QVC_PGR_2BTN_D_TIMER_121108 ill.2 • This is a Flameless Candle. Do not light wick with matches or lighter. • This flameless candle is made of REAL WAX. DO NOT place near any heat source that could cause wax to soften or melt. • Place the flameless candle on a protective base to avoid wax or oil deposits. • Failure to insert batteries in the correct polarity, as indicated (ill.1), may shorten the battery life or may cause them to leak. • Do not mix old and new batteries. • Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. • Do not dispose of batteries in fire. • Remove batteries if exhausted or if product is to be left unused for a long period of time.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project