veris 28

VERIS 28
TWO-WAY FULL-RANGE LOUDSPEAKER SYSTEM
25.5”
(649mm)
11.3”
(287mm)
11.7”
(297mm)
SYSTEM
Description
The VERIS 28 is a two-way, full-range
loudspeaker system suitable for use in
a wide variety of fixed installations.
This versatile unit is ideal for distributed
systems such as those found in cafes,
restaurants, shopping centers and
airports. With its powerful dual cone
drivers, the VERIS 28 provides additional low frequency and mid-range
output over that of its sister product, the
VERIS 8.
When paired with a subwoofer such as
the VERIS 210S, a VERIS 28 system
will produce high-fidelity, broad spectrum sound that belies its modest size.
In addition to distributed systems, the
VERIS 28 is an excellent choice for
ancillary delay applications. When
used to augment a FOH system in
venues such as auditoria, theatres, and
houses of worship, delay speakers can
significantly even-out the difference in
sound pressure level from the front of
the room to the rear of the room. Units
may be positioned for underbalcony fill,
overbalcony fill, or simply placed
towards the rear of the seating areas.
By deploying VERIS 28 loudspeakers
in such a manner, the system designer
will have far greater control over
relative levels and relative tonal
response when commissioning and
equalizing the installation.
The VERIS 28 may be mounted to a
wall or ceiling surface with a yoke
bracket (included), suspended from its
M6 threaded rigging points, or installed
using an OmniMountTM Series 30
mounting device.
Format: Two-way full-range, vented bass,
trapezoidal, dual cone drivers
Applications
•
•
•
•
•
•
•
Restaurants
Pubs
Cafes
Houses of
Worship
Shopping Malls
Airports
Delay Fill
Operating Range: 70 Hz - 18 kHz
Frequency Response: 90 Hz - 10 kHz (± 4 dB)
Dispersion (-6 dB): 90º H x 70º V (in vertical position)
Crossover Frequency: 2 kHz
Maximum SPL @1m: 118 dB continuous / 125 dB peak
Sensitivity in SPL: 93 dB (125 Hz - 10 kHz, 1/3 octave)
(1W/1m, free space) 93 dB (250 Hz - 4 kHz, speech range)
Max Power Handling: 300W RMS (34.6V)
750W Program / 1485W Peak
Impedance: Nominal 4Ω / Min. 4.5Ω at 210 Hz
Connectors: Terminal Strip and NL4 Compatible
Features
Internal DYNA-TECHTM
Dynamic Driver
Protection Circuitry
Black or White
Finish Available
Ferrofluid Treated
HF Driver for Improved
Heat Dissipation
Non-Resonant, NonMetallic HF Diaphragm
for Reduced Distortion
Carbon Ring Cone
Technology Provides
30% More Piston Area
with Increased Excursion
Capability
TRANSDUCERS
Low Frequency: Dual 8" (203mm) 150W RMS
375W Program, 8Ω
High Frequency: 3/4" (19mm) 50W RMS
125W Program, 8Ω
MECHANICAL
Enclosure: Trapezoidal (22.5º included angle)
11-ply cross-laminated birch
Finish: Black or white catalyzed polyester
paint (specify at time of ordering)
Rigging Provisions: (9) M6 threaded rigging fittings1
(4) M6 threaded fittings for
OmniMountTM 30 bolt pattern;
yoke bracket included
Grille: Powder coated steel, black or white
Dimensions: 25.5" (649mm) x 11.3" (287mm) x
H x W x D 11.7" (297mm)
Terminal Strip and NL4
Compatible Connectors
Due to ongoing development, specifications are subject to change without notice.
Net Weight: 31 lbs / 14.1 kg
1
100 lbs / 45.4 kg per point in straight line, 10:1 safety factor.
VERIS 28
TWO-WAY FULL-RANGE LOUDSPEAKER SYSTEM
Amplitude versus Frequency (in free space)
Impedance versus Frequency
Directivity Index
Axial Q
Recommended Power: 630 - 900 WRMS at 4Ω
Recommended High-Pass Filter: 70 Hz*
*24 dB / octave or higher
Installation Accessories
VERIS Handle
& Stand Socket
Attaches to Omni-MountTM
fasteners.
Tilting Bracket
Allows precise
angling of a
VERIS loudspeaker.
Seat Track Kit
Quick and easy way to
fly VERIS enclosures.
Yoke Bracket
Provides 0º, 10º,
& 20º inclination to
wall surface.
Tilting Brackets
Multiple brackets
may be used to
position one
loudspeaker
below another.
Eyebolt Kits
Suspend VERIS
enclosures safely
and easily.
Ceiling Mount Kit
Derives a hang
point from a ceiling
surface.
VERIS/V1.0/19FEB07