Model M-36-3 Large Capacity Cant Head Miter Saw MADE IN THE USA MACHINE SPECIFICATIONS STANDARD EQUIPMENT Capacity 2” Bi-Metal Blade AC Vector Drive Hydraulic Vise Operation Hydraulic Blade Tension Semi-Automatic Operation Built-in Coolant System Hydraulic Powered Blade Brush TEFC Motors Fused Disconnect with Lock Out Automatic Out-Of-Stock Shutdown Console Controlled Blade Speed Hydraulic Guide Arm Positioning Feed Pressure Monitor/Regulator Low Voltage Protection/Overload Protection Electronic Door Safety Interlocks Work Lights All Safety Guards Operator Manual and Parts List 22” High X 48” Wide @ 90° 22” High X 36” Wide @ -45° 22” High X 31½ ” Wide @ +45° Weight Capacity 15,000 lbs Blade Speed 115-540 SFPM Blade Size 2” X .063” X 28’6” Blade Guide Carbide with Idle Roller Backup Blade Tension Hydraulic Bandwheel Size 26” Frame Cant 6° Vise Hydraulic, Full Stroke Blade Drive 15 HP, 3ph AC Vector Drive Sawing Force 0-500 lbs Coolant Capacity 15 Gallons Hydraulic Capacity 20 Gallons Hydraulic Drive 5 HP Motor Work Height 34” Hydraulic Positioned Guide Arm Hydraulic Powered Blade Brush Hydraulic Holddown, Saw Vise Dual Direction Hydraulic Swivel Base with Miter Vise Digital Angle Display In Feed Roller Free Standing Control Console Blade Break/Stall Switch Shipping Weight 12,000 lbs Electrics Wired to NFPA 79 Machine Tool Standards. *Specifications Subject to Change Without Notice W.F. Wells, Inc. 16645 Heimbach Road · Three Rivers, MI 49093 Phone: (269) 279-5123 · Fax: (269) 279-6337 Web page: www.wfwells.com · E-mail: [email protected]
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021