Weslo 45 WLTL39907.0 User's Manual

Weslo 45 WLTL39907.0 User's Manual
Model No. WLTL39907.0
Serial No.
USER’S MANUAL
Write the serial number in the space
above for future reference.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer satisfaction. If you have
questions, or if parts are missing,
PLEASE DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.wesloservice.com
CAUTION
Visit our website at
Read all precautions and instructions in this manualwww.proform.com
before using
this equipment. Save this manual
for future reference.new products, prizes,
fitness tips, and much more!
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
The decals shown here have been placed on the
treadmill. If a decal is missing or illegible, call
the telephone number on the front cover of this
manual and request a free replacement decal.
Apply the decal in the location shown. Note:
The decals may not be shown at actual size.
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons
with pre-existing health problems.
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.
3. Use the treadmill only as described.
12. Use only a single-outlet surge suppressor
that meets all of the specifications described
on page 10. To purchase a surge suppressor,
see your local WESLO dealer or call the telephone number on the front cover of this manual and order part number 146148, or see
your local electronics store.
4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
13. Failure to use a properly functioning surge
suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change
speed, accelerate, or stop unexpectedly,
which may result in a fall and serious injury.
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
14. Keep the power cord and the surge suppressor away from heated surfaces.
2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
15. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROUBLESHOOTING on page 20 if the treadmill is
not working properly.)
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
7. Keep children under the age of 12 and pets
away from the treadmill at all times.
16. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 12).
8. The treadmill should be used only by persons
weighing 275 lbs. (125 kg) or less.
9. Never allow more than one person on the
treadmill at a time.
17. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
10. Wear appropriate exercise clothes while
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes; never use the treadmill with bare feet,
wearing only stockings, or in sandals.
18. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
19. The pulse sensor is not a medical device.
Various factors, including the user’s movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only as
an exercise aid in determining heart rate
trends in general.
11. When connecting the power cord (see page 10),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
3
20. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and switch the reset/off circuit breaker to the off position when the
treadmill is not in use. (See the drawing on
page 5 for the location of the circuit breaker.)
24. Never insert any object into any opening on
the treadmill.
25.
DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
21. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 18.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
22. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
26. This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
23. Inspect and properly tighten all parts of the
treadmill regularly.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
ual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Thank you for selecting the new WESLO® CADENCE
45 treadmill. The CADENCE 45 treadmill offers a selection of features designed to make your workouts at
home more effective and enjoyable. And when you’re
not exercising, the CADENCE 45 treadmill can be
folded up, requiring less than half the floor space of
other treadmills.
To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.wesloservice.com/registration.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after reading this manual, please see the front cover of this man-
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Fan
Accessory Tray
Console
Handrail
Key/Clip
Storage Latch
Upright
Reset/Off
Circuit Breaker
Power Cord
Walking Belt
Foot Rail
Cushioned Walking Platform
Rear Roller
Adjustment Bolts
5
ASSEMBLY
3/8” Star
Washer (83)–4
Pulse Bar Star
Washer (65)–4
To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires
two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing
materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or
the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on
(119)–1
1/2” Screw
walking
belt, simply
wipe off the lubricant with a soft cloth and a mild, non-abrasive
cleaner.
top of the 3/4”
Tek Screw
(58)–8
Assembly requires the included hex keys and your own Phillips screwdriver
mallet
, and adjustable wrench Handrail Bolt. (37)–4
, rubber
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses
shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic
parts, do not use power tools for assembly.
1" Tek Screw (39)–4
Extension Leg
Nut (46)–2
3/4" Screw (2)–12
Handrail
Bolt (37)–2
Silver Ground
Screw (96)–1
Wheel Bolt (64)–2
Wheel Nut (32)–2
2 1/4" Bolt (93)–2
5/16" Star
Washer (101)–4
1/4" Star
Washer (95)–2
2 3/4" Bolt (100)–2
1. Make sure that the power cord is unplugged.
1
With the help of a second person, carefully tip
the treadmill onto its left side as shown. Partially
fold the Frame (86) so the treadmill is more stable. Do not fully fold the Frame until the
treadmill is completely assembled.
69
93
101
Insert an Extension Leg (63) into the base of the
right Upright (69). Hold an Extension Leg Nut
(46) in the bottom of the Extension Leg, and
thread a 2 1/4" Bolt (93) with a 5/16" Star
Washer (101) into the top of the Extension Leg.
Next, thread a 2 3/4" Bolt (100) with a 5/16" Star
Washer (101) into the bottom of the Extension
Leg. Firmly tighten the Bolts.
101
63
86
6
46
100
Silver Ground
Screw (G)–1
2. Attach two Round Base Pads (57) to the base of
the right Upright (69) with two 1" Tek Screws
(39).
2
64
Attach a Wheel (66) to the base of the right
Upright (69) with a Wheel Bolt (64) and a Wheel
Nut (32) as shown. Do not overtighten the
Wheel Bolt; the Wheel should turn freely.
66
69
32
39
57
57
3. With the help of a second person, carefully tip
the treadmill onto its right side. Do not fully fold
the Frame (86) until the treadmill is completely assembled.
39
3
69
Insert the other Extension Leg (63) into the base
of the left Upright (69). Hold an Extension Leg
Nut (46) in the bottom of the Extension Leg, and
thread a 2 1/4" Bolt (93) with a 5/16" Star
Washer (101) into the top of the Extension Leg.
Next, thread a 2 3/4" Bolt (100) with a 5/16" Star
Washer (101) into the bottom of the Extension
Leg. Firmly tighten the Bolts.
93
101
101
46
100
63
86
4. Attach two Round Base Pads (57) to the base of
the left Upright (69) with two 1" Tek Screws (39).
4
Attach a Wheel (66) to the base of the left
Upright (69) with a Wheel Bolt (64) and a Wheel
Nut (32) as shown. Do not overtighten the
Wheel Bolt; the Wheel should turn freely.
66
64
69
32
39
57
With the help of a second person, lower the
Uprights (69) so that the Round Base Pads (57)
are on the floor.
57
39
7
5. Insert the tab on one of the Handrail Brackets
(5) into the slot in the right Upright (69). Attach
the Handrail Bracket with a 3/4" Screw (2).
Attach the other Handrail Bracket to the left
Upright (not shown) in the same way.
5
69
Slot
Tab
5
2
6. Set the Console (43) face-down on a soft surface to avoid scratching the Console. Next, hold
a Handrail (71) near the console wire. Insert the
console wire into the hole in the side of the
Handrail. Grasp the tie and pull the console wire
out of the hole in the top. Then, attach the
ground wire to the Handrail with a Silver Ground
Screw (96).
6
Tie
2
71
2
2
Set the Handrail (71) on the Console (43).
Attach the Handrail with three 3/4" Screws (2).
Make sure that the console wire is not
pinched. Start all three Screws before tightening any of them; do not overtighten the
Screws. Insert the excess ground wire back into
the opening in the Console.
Console Wire
Ground Wire
96
43
Attach the other Handrail (not shown) to the
Console (43) as described above. Note: There
are no wires on the other side.
7. Remove the tie holding the Wire Harness (42) to
the right Upright (69). With the help of a second
person, hold the Console (43) near the right
Upright.
7
Remove the tie from the console wire. Connect
the Wire Harness (42) to the console wire. See
the inset drawing. The connectors should
slide together easily and snap into place. If
the connectors do not slide together easily and
snap into place, turn one connector and try
again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON. Then, insert the connectors and
the excess wire into the right Upright (69).
43
Console
Wire
42
Console
Wire
42
69
8
8. With the help of a second person, press a
Handrail Cap (21) onto the lower end of each
Handrail (71) as shown. Next, set the Handrails
on the Uprights (69) while sliding the Handrail
Caps over the Handrail Brackets (5). Make sure
that the Wire Harness (42) and the console
wire are not pinched.
8
69
71
71
42
21
69
5
21
5
9. Finger tighten two Handrail Bolts (37) with two
1/4" Star Washers (95) into the Uprights (69)
and the Handrails (71) as shown. Do not
tighten the Handrail Bolts yet.
9
71
37
Attach the lower ends of the Handrails (71) with
3/4" Screws (2). Then, tighten the two
Handrail Bolts (37).
95
37
71
95
69
69
2
2
10. Attach the Latch Housing (29) and the Latch
Spacer (98) to the left Upright (69) with two 3/4"
Screws (2). Make sure that the large hole in
the Latch Housing is on the side shown. Do
not overtighten the Screws.
10
Large Hole
98
29
69
Knob
Remove the knob from the pin. Make sure that
the collar and the spring are on the pin as
shown. Insert the pin into the Latch Housing
(29), and tighten the knob onto the pin.
Collar
2
Spring
Pin
11. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking
belt (see page 21). To protect the floor or carpet, place a mat under the treadmill.
9
OPERATION AND ADJUSTMENT
THE PRE-LUBRICATED WALKING BELT
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCI-equipped outlets.
Your treadmill features a walking belt coated with highperformance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking
belt or the walking platform. Such substances will
deteriorate the walking belt and cause excessive
wear.
HOW TO PLUG IN THE POWER CORD
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
DANGER: Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
1
Grounded Outlet Box
Surge Suppressor
Grounding Pin
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right). To purchase a surge suppressor, see
your local WESLO dealer or call the telephone
number on the front cover of this manual and order
part number 146148, or see your local electronics
store.
Grounding Pin
Grounded Outlet
Grounding Plug
2
Grounded Outlet Box
Adapter
Use only a single-outlet surge suppressor that is
UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a
UL suppressed voltage rating of 400 volts or less
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indicate
whether it is functioning properly. Failure to use a
properly functioning surge suppressor could result
in damage to the control system of the treadmill. If
the control system is damaged, the walking belt
may change speed, accelerate or stop unexpectedly, which may result in a fall and serious injury.
Surge Suppressor
Lug
Metal Screw
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is
grounded before using an adapter.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
10
CONSOLE DIAGRAM
Key
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective and
enjoyable. When you select the manual mode of the
console, you can change the speed and incline of the
treadmill with the touch of a button. As you exercise,
the console will display continuous exercise feedback.
You can even measure your heart rate using the builtin pulse sensor.
The console also features two calorie goal programs
that control the speed and incline of the treadmill to
help you burn unwanted pounds.
In addition, the console offers two distance goal programs—the 5K program counts down from a 5 kilometer run, and the 10K program counts down from 10
kilometers. The console also features two speed programs. Each program automatically controls the speed
and incline of the treadmill as it guides you through an
effective workout.
Clip
To use the manual mode of the console, follow the
steps beginning on page 12. To use a calorie goal
program, see page 14. To use a distance goal program, see page 15. To use a speed program, see
page 16.
IMPORTANT: If there is a sheet of clear plastic on
the face of the console, remove the plastic. To prevent damage to the walking platform, wear clean
athletic shoes while using the treadmill. The first
time the treadmill is used, observe the alignment of
the walking belt, and center the walking belt if necessary (see page 21).
Note: The console can display speed and distance in
either miles or kilometers. To find out which unit of
measurement is selected or to change the unit of measurement, see THE INFORMATION MODE on page
17. For simplicity, all instructions in this section refer to
miles.
11
HOW TO TURN ON THE POWER
3. Select the manual mode.
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before turning on the power. If you do not
do this, the console displays or other electrical
components may become damaged.
Plug in the power cord (see
page 10). Next, locate the
reset/off circuit breaker on
the treadmill frame near
the power cord. Make sure
that the circuit breaker is in
the “reset” position.
When the key is inserted, the manual
mode will be selected. If
a program has been selected, press the
Program Select button
repeatedly until only zeros appear in the display.
Reset
Postion
4. Start the walking belt.
To start the walking belt, press the Start button, the
Speed increase button, or one of the ten numbered
speed buttons.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as
you plug in the power cord and switch the circuit
breaker to the reset position, the demo mode is
turned on. To turn off the demo mode, see THE INFORMATION MODE on page 17 to turn off the
demo mode.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at 1 mph.
As you exercise, change the speed of the walking
belt as desired by pressing the Speed increase
and decrease buttons. Each time you press a button, the speed setting will change by 0.1 mph; if
you hold down a button, the speed setting will
change in increments of 0.5 mph.
Next, stand on the foot rails of the treadmill. Locate the
clip attached to the key (see the drawing on page 11),
and slide the clip securely onto the waistband of your
clothes. Then, insert the key into the console. After a
moment, the displays will light. IMPORTANT: In an
emergency situation, the key can be pulled from
the console, causing the walking belt to slow to a
stop. Test the clip by carefully taking a few steps
backward; if the key is not pulled from the console,
adjust the position of the clip.
If you press one of the ten numbered speed buttons, the walking belt will gradually increase in
speed until it reaches the selected speed setting.
To stop the walking belt, press the Stop button.
The time will begin to flash in the display. To restart
the walking belt, press the Start button, the Speed
increase button, or one of the ten numbered speed
buttons.
5. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase and decrease buttons. Each time
you press a button, the incline setting will change
by 0.5%; if a button is held down, the incline setting
will change quickly.
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER above.
6. Follow your progress with the displays.
2. Enter your weight if desired.
When the manual mode
(or a distance goal program) is selected, a
track representing 1/4
mile will appear in the
matrix. As you walk or
run on the treadmill, the indicators around the track
will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession.
For the most accurate
calorie count, enter your
weight into the console
by pressing the Weight
increase and decrease
buttons repeatedly.
Note: Once you have entered your weight, your
weight will be saved in memory.
12
The lower left display
can show the elapsed
time and the distance
that you have walked
or run during your
workout. Also, each
time you change the incline, the display will show
the incline setting for a few seconds. Note: When a
program is selected, the display will show the time
remaining in the program instead of the elapsed
time. When a distance goal program is selected,
the display will show the number of kilometers remaining in the program instead of the distance that
you have walked or run.
The lower right display can show the speed of the
walking belt and the approximate number of calories that you have burned during your workout.
This display will also show your heart rate when
you use the handgrip pulse sensor (see step 7).
The upper display can
show the distance that
you have walked or run,
the approximate number of calories you have
burned, the speed of the
walking belt, or the workout time. Press the Display
button repeatedly until the upper display shows the
information that you are most interested in viewing.
To measure your
heart rate, stand
on the foot rails
and place your
hands on the
metal contacts—
Metal Contacts
avoid moving
your hands.
When your pulse
is detected, the heart symbol in the display will
begin to flash each time your heart beats, one or
two dashes will appear, and then your heart rate
will be shown. For the most accurate heart rate
reading, continue to hold the contacts for
about 15 seconds.
8. Turn on the fan if desired.
The fan features low and high speed settings.
Press the Fan button repeatedly to select a fan
speed or to turn off the fan. Note: If the fan is on
when the walking belt is stopped, the fan will turn
off automatically after a few minutes.
9. When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting
when you fold the treadmill to the storage position, or you may damage the treadmill. Next, remove the key from the console and put it in a secure
place.
Note: While information is shown in the upper display, the same information will not be shown in the
lower left or lower right display.
When you are finished using the treadmill, switch
the reset/off circuit breaker to the “off” position and
unplug the power cord. IMPORTANT: If you do
not do this, the treadmill’s electrical components may wear prematurely.
To reset the displays, press the Stop button, remove the key, and then reinsert the key.
7. Measure your heart rate if desired.
Before using the handgrip pulse sensor, remove
the sheets of clear plastic from the metal contacts.
In addition, make sure that your hands are clean.
13
HOW TO USE A CALORIE GOAL PROGRAM
The program will continue in this way until the last
segment of the profile flashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
12.
If the speed setting for the current segment is too
high or too low, you can manually override the setting by pressing the Speed buttons. When the current segment of the program ends, the treadmill
will automatically adjust to the speed setting for
the next segment.
2. Enter your weight if desired.
See step 2 on page 12. Note: It is important to
enter your weight before using a calorie goal program. The console will adjust the speed settings of
the calorie goal programs based on your weight.
To stop the program at any time, press the Stop
button. To restart the program, press the Start button or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed setting for that segment.
3. Select a calorie goal program.
To select a calorie goal
program, press the
Program Select button
repeatedly until “P 1”
or “P 2” appears in the
display. When a calorie goal program is selected, the maximum speed
setting of the program will flash in the displays for a
few seconds; then the display will show how long
the program will last. A profile of the speed settings
of the program will scroll across the matrix.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
program. The actual number of calories that
you burn will depend on your weight. In addition, if you manually change the speed or incline of treadmill during the program, the number of calories you burn will be affected.
5. Change the incline of the treadmill as desired.
4. Press the Start button or the Speed increase
button to start the program.
See step 5 on page 12.
A moment after you press the button, the treadmill
will automatically adjust to the first speed settings
for the program. Hold the handrails and begin walking.
6. Follow your progress with the displays.
See step 6 on pages 12 and 13.
7. Measure your heart rate if desired.
Each program is divided into 30 one-minute segments. One speed setting is programmed for each
segment. Note: The same speed setting may be
programmed for consecutive segments.
See step 7 on page 13.
8. Turn on the fan if desired.
During the program,
Current Segment
the profile will show
your progress. The
flashing segment of the
profile represents the
current segment of the
program. The height of
the flashing segment indicates the speed setting for
the current segment. At the end of each segment, a
series of tones will sound and the next segment of
the profile will begin to flash. If a different speed
setting is programmed for the next segment, the
speed setting will flash in the display to alert you.
See step 8 on page 13.
9. When you are finished exercising, remove the
key from the console.
See step 9 on page 13.
14
HOW TO USE A DISTANCE GOAL PROGRAM
of meters still to be run. When only 20 meters remain, the display will flash and a series of tones
will sound.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
12.
To stop the program at any time, press the Stop
button. The time will begin to flash in the display.
To restart the program, press the Start button. The
walking belt will begin to move at 1 mph. Adjust the
speed of the walking belt as desired by pressing the
Speed increase or decrease button or one of the
ten numbered Speed buttons.
2. Select a distance goal program.
To select a distance
goal program, press
the Program Select
button repeatedly until
“P 3” or “P 4” appears
in the display. When a
distance goal program is selected, the maximum
speed setting of the program will flash in the display for a few seconds. A distance goal of 5 kilometers or 10 kilometers will then appear in the display.
When you have completed a 5-kilometer run or a
10-kilometer run, your total time will flash in the
display and the word “cool” (for cool down) will appear in the display. If the speed of the walking belt
is greater than 5 mph, the walking belt will then
slow to 5 mph for one minute. After one minute, the
walking belt will slow to 4 mph for 2 minutes. The
walking belt will then slow to 3 mph for 2 minutes.
The walking belt will then slow to a stop.
3. Press the Start button to start the program.
4. Change the incline of the treadmill as desired.
A moment after you press the button, the walking
belt will begin to move at 3 mph. Hold the handrails
and begin walking.
See step 5 on page 12.
5. Follow your progress with the displays.
Near the end of the second minute of the program,
the speed setting will flash in the display and a series of tones will sound. The speed of the walking
belt will then increase to 4 mph.
See step 6 on pages 12 and 13.
6. Measure your heart rate if desired.
See step 7 on page 13.
Near the end of the third minute of the program,
the speed setting will flash in the display and a series of tones will sound. The speed of the walking
belt will then increase to 5 mph.
7. Turn on the fan if desired.
See step 8 on page 13.
Near the end of the fourth minute of the program,
the speed setting will flash in the display and a series of tones will sound. The speed of the walking
belt will then increase to 6.5 mph.
8. When you are finished exercising, remove the
key from the console.
See step 9 on page 13.
Note: To change the speed of the walking belt or
the incline of the treadmill at any time during the
program, press the Speed or Incline buttons.
The distance (DIST.) display will show the number
15
HOW TO USE A SPEED PROGRAM
is programmed for the next segment, the speed setting will flash in the display to alert you.
1. Insert the key into the console.
The program will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
See HOW TO TURN ON THE POWER on page
12.
2. Select one of the speed programs.
If the speed setting for the current segment is too
high or too low, you can manually override the setting by pressing the Speed buttons. When the current segment of the program ends, the treadmill
will automatically adjust to the speed setting for
the next segment.
To select a speed program, press the
Program Select button
repeatedly until “P 5” or
“P 6” appears in the
upper display. The maximum speed setting of the selected program will
also flash in the display for a few seconds.
To stop the program at any time, press the Stop
button. To restart the program, press the Start button or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed setting for that segment.
3. Press the Start button or the Speed increase
button to start the program.
When you press either button, the treadmill will automatically adjust to the speed setting that is programmed for the first segment of the program. Hold
the handrails and begin walking.
4. Change the incline of the treadmill as desired.
See step 5 on page 12.
Each program consists of 30 one-minute segments.
One speed setting is programmed for each segment. Note: The same speed setting may be programmed for consecutive segments. The profiles
on the console show how the speed of the walking
belt will change during the programs.
During the program, the
Current Segment
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the program. The height of the
flashing segment indicates the speed setting for the
current segment. At the end of each segment, a series of tones will sound and the next segment of the
profile will begin to flash. If a different speed setting
5. Follow your progress with the displays.
See step 6 on pages 12 and 13.
6. Measure your heart rate if desired.
See step 7 on page 13.
7. Turn on the fan if desired.
See step 8 on page 13.
8. When you are finished exercising, remove the
key from the console.
See step 9 on page 13.
16
THE INFORMATION MODE
The lower left display will
show the total number of
miles or kilometers that the
walking belt has moved.
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
Note: The console features a display demo mode, designed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode
is turned on, a “d” will appear in the display while the information mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
An “E” for English miles or
an “M” for metric kilometers
will appear in the lower right
display. Press the Speed increase button to change the
unit of measurement, if desired.
To exit the information mode, remove the key from the
console.
The upper display will show the total number of hours
that the treadmill has been used.
17
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. If you do not do this, you may permanently
damage the treadmill. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs. (20 kg) to
raise, lower, or move the treadmill.
1. Hold the metal frame firmly in the location shown by the
arrow at the right. CAUTION: To decrease the possibility
of injury, do not lift the frame by the plastic foot rails.
Make sure to bend your legs and keep your back straight.
As you raise the frame, make sure to lift with your legs
rather than with your back. Raise the frame about halfway
to the vertical position.
Frame
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the frame until the hole in the frame
is aligned with the latch pin. Slowly release the latch knob;
make sure that the latch pin is fully inserted into the hole
in the frame.
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
Engaged
Latch
Knob
Frame
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage
position as described above. Make sure that the latch pin is
fully inserted into the hole in the frame.
1. Hold the upper ends of the handrails, and place one foot
against one of the wheels.
2. Tilt the treadmill backward until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not move the treadmill over an uneven surface.
Wheels
3. Place one foot against one of the wheels, and carefully lower
the treadmill until it is resting in the storage position.
18
Base
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the treadmill with your right hand as shown. Pull the
latch knob to the left and hold it. Pivot the frame downward
until it is past the latch pin. Then, slowly release the latch
knob.
Engaged
Latch
Knob
Frame
2. Hold the metal frame firmly with both hands, and lower it
to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic
foot rails. Do not drop the frame to the floor. Make sure to
bend your legs and keep your back straight.
Frame
19
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If you need further assistance, please call the telephone number on the
front cover of this manual.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 10). Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. Important: The treadmill is not compatible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is inserted into the console.
c. Check the reset/off circuit breaker located on the
treadmill frame near the power cord. If the switch
protrudes as shown, the circuit breaker has tripped.
To reset the circuit breaker, wait for five minutes
and then press the switch back in.
c
Tripped
Reset
PROBLEM: The power turns off during use
SOLUTION: a. Check the reset/off circuit breaker located on the treadmill frame near the power cord (see the
drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch
back in.
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for
five minutes, and then plug it back in.
c. Remove the key from the console. Reinsert the key into the console.
d. If the treadmill still will not run, please see the front cover of this manual.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and UNPLUG THE
POWER CORD. Remove the Hood Screws (26) from
the Hood (1), and carefully pivot the Hood off.
a
26
1
Locate the Reed Switch (10) and the Magnet (18) on
the left side of the Pulley (17). Turn the Pulley until
the Magnet is aligned with the Reed Switch. Make
sure that the gap between the Magnet and the
Reed Switch is about 1/8 in. (3 mm). If necessary,
loosen the 3/4" Tek Screw (58), move the Reed
Switch slightly, and retighten the Screw. Reattach the
Hood (not shown), and run the treadmill for a few minutes to check for a correct speed reading.
20
1/8 in.
58
17
10
18
Top
View
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10.
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE
POWER CORD. Using the hex key, turn both rear
roller bolts counterclockwise, 1/4 of a turn. When the
walking belt is properly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to 8
cm) off the walking platform. Be careful to keep the
walking belt centered. Then, plug in the power cord,
insert the key, and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
b
2–3 in.
Rear Roller Bolts
c. If the walking belt still slows when walked on, please see the front cover of this manual.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, first remove the key
and UNPLUG THE POWER CORD. If the walking
belt has shifted to the left, use the hex key to turn
the left rear roller bolt clockwise 1/2 of a turn; if the
walking belt has shifted to the right, turn the left
bolt counterclockwise 1/2 of a turn. Be careful not to
overtighten the walking belt. Then, plug in the power
cord, insert the key, and run the treadmill for a few
minutes. Repeat until the walking belt is centered.
b. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using
the hex key, turn both rear roller bolts clockwise, 1/4
of a turn. When the walking belt is correctly tightened,
you should be able to lift each edge of the walking
belt 2 to 3 in. (5 to 8 cm) off the walking platform. Be
careful to keep the walking belt centered. Then, plug
in the power cord, insert the key, and carefully walk
on the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
a
b
PROBLEM: The console displays remain lit when you remove the key from the console
SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a
store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 17 to turn off the demo mode.
21
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning any
exercise program, consult your physician.
This is especially important for persons over
the age of 35 or persons with pre-existing
health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is intended only as an exercise aid in determining
heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of
oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
22
PART LIST—Model No. WLTL39907.0
Key
No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
25
1
2
2
1
4
1
2
1
1
2
7
14
15
2
2
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
2
1
1
1
2
2
3
3
1
2
3
1
2
1
1
1
7
10
2
35
36
1
2
37
38
2
6
Description
Hood
3/4" Screw
Motor Belt
Motor Tension Bolt
Handrail Bracket
Motor Star Washer
Belly Pan Screw
Drive Motor
Foot Rail Decal
Reed Switch
Latch Warning Decal
Frame Spacer
Frame Pivot
Nut/Motor Nut
Frame Pivot Bolt
Walking Platform
Screw, Rear
Upper Handrail Cap
Front Roller/Pulley
Magnet
Motor Pivot Bolt
Motor Bracket Bolt
Lower Handrail Cap
Hood Clip
Roller Adjustment Bolt
Motor Mount Bracket
Rear Roller Bracket
Hood Screw
Latch Assembly
Motor Tension Nut
Latch Housing
Latch Catch
Left Rear Foot
Wheel Nut
Foot Rail Screw
Walking Platform
Screw, Front
Walking Platform
Rear Roller
Bracket Screw
Handrail Bolt
1/4" Washer
Key
No. Qty.
39
40
41
42
43
44
45
46
47
48
49
50
51
52
4
1
1
1
1
2
1
2
1
1
1
1
1
1
53
54
55
6
2
2
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
1
4
5
1
1
2
2
2
2
2
2
2
8
1
1
2
1
1
1
2
1
1
Description
1" Tek Screw
Ground Wire
Sensor Nut
Wire Harness
Console
Rear Roller Plate
Rear Roller
Extension Leg Nut
Console Base
Fan Cover w/Fan
Wire Clamp
Key/Clip
Incline Motor
Incline Motor Bolt,
Lower
Rear Foot Screw
Incline Pivot Bolt
Rear Roller
Lock Washer
Motor Controller Wire
Round Base Pad
3/4" Tek Screw
Controller
Lift Frame
Extension Leg Pad
Caution Decal
Extension Leg
Wheel Bolt
Extension Leg Endcap
Wheel
Nut
8" Cable Tie
Upright
Cable Clamp
Handrail
Walking Belt
Optic Disk
Left Foot Rail
Frame Pivot Nut
Motor Flat Washer
Incline Motor
Nut, Upper
23
R0707A
Key
No. Qty.
78
79
80
1
1
1
Description
Right Foot Rail
Power Cord
Reset/Off
Circuit Breaker
81
1
Belly Pan
82
2
Belt Guide
83
4
Belt Guide Screw
84
4
Isolator Screw
85
2
Isolator Cushion
86
1
Frame
87
2
Releasable Tie
88
1
Front Roller
Star Washer
89
1
Optic Sensor Wire
90
1
Power Cord Grommet
91
1
Sensor Clip
92
4
Ground Wire Screw
93
2
2 1/4" Bolt
94
1
Hex Key
95
2
1/4" Star Washer
96
1
Silver Ground Screw
97
2
Cage Nut
98
1
Latch Spacer
99
1
5/32” Hex Key
100
2
2 3/4" Bolt
101
4
5/16" Star Washer
102
1
Right Rear Foot
103
2
U-nut
104
1
Stop Bracket
105
1
Console Lens
106
1
Sensor Star Washer
107
1
Optic Sensor
108
1
Sensor Screw
*
1
4" Black Wire, M/F
*
1
8" Green Wire, F/R
*
2
4" Blue Wire, 2F
*
1
4" Blue Wire, M/F
*
1
6" Red Wire, M/F
*
1
User’s Manual
*These parts are not illustrated.
Specifications are subject to
change without notice.
24
25
23
55
33
38
44
36
74
53
33
15
94
11
31
2
99
23
30
33
55
38
38
84
53
102
25
38
84
72
36
44 45
85
9
15
53
83
82
33
40
92
86
67
34
35
14
33
33
78
33
84
38
17
18
85
38
84 33
83
82
67
34
9
33
14
33
EXPLODED DRAWING A—Model No. WLTL39907.0
R0707A
EXPLODED DRAWING B—Model No. WLTL39907.0
R0707A
26
26
22
26
22
22
1
28
6
3
20
24
76
10
4
20
4
58
28
8
91
12
70
60
19
23
75
88
13
75
79
12
7
92
90
7
2
80
7
49
2
87
68
81
7
25
59
EXPLODED DRAWING C—Model No. WLTL39907.0
R0707A
16
16
2
2
2
97
2
37
71
71
97
95
29
21
98
42
27
2
37
2
21
95
66
2
5
93
56
32
64
13
2
54
5
2
103
101
57
39
42
62
13
63
100
65
93
101
61
54
57
101
39
13
46
69
77
89
58
32
57
62
51
52
73
41
106
107
108
66
57
65
13
104
63
101
100 39
46
61
58
26
39
103
64
EXPLODED DRAWING D—Model No. WLTL39907.0
2
48
2
2
2
2
2
47
43
105
2
2
2
2
2
2
96
50
27
R0707A
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The drive motor is warranted for five (5) years after
the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase.
This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to
replacing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped to a
service center, freight charges to and from the service center will be the customer’s responsibility. For inhome service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 255851 R0707A
Printed in USA © 2007 ICON IP, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement