Advertisement
Advertisement
cover 2145.3 (16x24) 24-10-2002 08:48 Pagina 1
cover 2145.3 (16x24) 24-10-2002 08:48 Pagina 2
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 1
Help?
If this instruction manual does not give an answer or if ‘Before calling service’ do not solve your TV problem, you can call your Local
Philips Customer or Service Centre.
See the supplied World-wide guarantee booklet.
Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the
Philips helpline.
Model:
Product No:
Contents
Installation
Preparation 2
Keypad on top of the TV 2
Your remote control 3-5
Use of the menus and the menu system 6
Menu Info / Remote Control Info 7
Select the menu language 7
Store TV channels
Automatic installation 8
Manual installation 9
Give name 9
Reshuffle the channel list 9
Select favourite TV channels 9
Install TV setup
Speakers 10-11
General 11-12
Source 12
Demo 12
Operation
TV menu
Picture menu 13
Sound menu 14-15
Features menu 15-16
Dual screen/PIP 16
Multipip 17
Teletext 17-18
Connect Peripheral Equipment
Connecting and selecting equipment 20-24
Remote control functions for peripherals 24
Recording 24
Before calling service 25
Tips 26
Glossary 26
Specifications 27
1
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 2
Preparation
&
Place the TV on a solid surface.
For ventilation, leave at least 5 cm free all around the TV.
min.
1m
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place any objects on top of the TV. Avoid heat, direct sunlight and exposure to rain or water.
Keep mobile telephones at a safe distance to avoid disturbances in picture and sound.
é
Insert the aerial plug firmly into the aerial socket x at the back of the TV. For best picture quality use the suppressor-aerial cable supplied.
“
Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with your household waste. Please check on how to dispose of exhausted batteries according to local regulations.
Note: this remote control functions with TVs and other equipment which use the RC6 signalling standard.
‘
Insert the mains plug of the TV in the wall socket having a mains voltage of 220V-240V.
To prevent damaging the mains (AC) cord which could cause a fire or electric shock, do not place the TV on the cord.
(
Switch the TV on : Press the power switch
A on the front of your TV.
A green indicator on the front of the TV lights up when the screen is on.
If the indicator is red, press the
- CH +
keys on the remote control.
The green lamp blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu
Language
automatically appears on the screen. The explanation appears in different languages one at a time. Choose your own language and press the OK key on the remote control.
AA - 1,5V
Keypad on top of the TV
V
M
CH
Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV.
• Press the V - or + key to adjust the volume.
• Press the CH - and + key to browse through the TV channels or sources stored and to select them.
• Press the
M
key to summon the main menu.
Use the V - and + keys to select the menu items in the horizontal axis.
Use the
CH
- and + keys to select submenu items in the vertical axis.
Note:
- Sometimes not all the menu items are visible on the screen.
Press the
CH
+ key to reveal all items.
- Exit lets you dismiss the menu. Select
Exit
and press the
M
key.
Installation
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 3
Installation
Use of the remote control
Use the on-screen info for more information about the different keys. See p. 7.
v
Select peripherals
Press this key repeatedly to select
AV1
,
AV2
,
AV3,
AV4
or
SIDE
, according to where you connected the peripherals (p. 20).
VCR DVD AMP AUX
Press one of these keys to use the remote control directly in the video recorder, DVD, amplifier or other auxiliary mode (
CD
,
SAT
). A green indicator lights up.
To return to TV mode, press the key again or wait for the indicator to dim (20 sec.)
B Standby
The set is switched off and the red indicator lights up.
To switch the TV on again, press again.
®Ò‡π†
Video recorder see p. 20 b Dual screen see p. 16.
S Freeze
To activate/de-activate the frozen picture, p. 12 and to hold a teletext page. See p. 18.
fi Multipip see p. 17.
V volume.
¬
Press + or - to adjust the
Interrupt the sound or restore it.
®
PIXEL
PLUS
x
Ò ‡ π † b
OK
V v
VCR DVD AMP AUX
b S
¬
B fi
MENU
Ï
CH
x
Switching Pixel Plus demo on/off
&
Press the Pixel Plus key.
The TV screen is divided into 2 parts:
- in the left part Pixel Plus and
Digital Natural Motion switched off;
- in the right part Pixel Plus and
Digital Natural Motion switched on.
é
Press the Pixel plus key again to switch the Pixel Plus demo off.
b
Teletext on/off p. 17
CH
Channel selection
To browse through the TV channels and sources stored.
Only those channels which are in the favourite list can be selected with the
- CH +
keys.
1
4
7
i
8
0
2
5
SMART
ACTIVE
CONTROL SMART
M h a
SOUND PICTURE
3
6
9
0
Ï
Main menu on/off p. 13
OK Press this key to activate your choice, when in the menus.
0/9
Digit keys
To select a TV channel.
For a two digit channel number, enter the second digit within 2 seconds.
To switch immediately to a selected one digit TV channel, keep the digit key pressed a bit longer.
i
Screen information
Press to display information about the selected TV channel and programme.
Menu / Remote Control Info
When the menu is on screen, press i to display info on the selected menu item.While the menu info is displayed, press any key to display remote control info. See p. 7.
Use of the remote control
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 4
0 Smart surf
With this feature you can easily switch between up to 9 different TV channels/sources.
In the menu system, you can set Smart surf to 2- or 9-channel.
Press this key to select the previously viewed TV channel or source in case of a 2 channel surf, or to select the surf ring in case of a 9 channel surf.
In case of a 9 channel surf, a list appears at the right side of the screen. On top, the most recent channel is displayed.The puck is on the channel number currently viewed.
Press the 0 key to turn to the next channel in the list or press cursor up/down to immediately select the desired TV channel of the list.
To add a new channel or source: tune to the channel or source you wish to add.
Press the 0 key. Press the cursor right to add.
If there are already nine channels/sources in the list, the one at the bottom of the list will be removed.
To remove a channel or source: select the channel number you want to remove.
Press the 0 key. Press the cursor right to remove.
Press the OK key or wait for the time out to dismiss the Smart surf display.
U
Time display: The time is displayed on the screen.
h
Teletext function p. 18.
Q
Surround mode
Press this key repeatedly to select another available surround mode: Stereo, Dolby 3
Stereo, 3D Surround, Hall or
Dolby Pro Logic.
Z
ZOOM
on/off
Press the
ZOOM
Z key to activate/ deactivate the zoom function.Press the OK key repeatedly to select one of the zoom magnifications (x1, x4, x9, x16). Use the cursor up/down, left/right to shift the selected zoom window over the screen with the cursor.
The zoom window is reset after: selecting another TV channel, another picture format or when another picture format is selected automatically.
Use of the remote control
v
B
VCR DVD AMP AUX
b S fi
®
PIXEL
PLUS
x
Ò ‡ π † b
OK
MENU
Ï
V ¬
CH
1
4
7
i
2
5
8
0
3
6
9
0
U h
Q Z q c q Picture format
Press this key repeatedly to select another picture format:
Auto format, 4:3 or Vertical squeeze.
Auto format makes the picture fill the screen as much as possible.
Vertical squeeze squeezes the picture to a wide screen picture format.
Auto format
Vertical squeeze
c
Swapping screens
See p. 16.
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 5
Smart Keys
To select predefined picture and sound settings.
M
Smart Sound
Each time it is pressed, a different sound setting is selected, corresponding with specific factory settings of treble and bass.
a
Smart Picture
Each time it is pressed, a different picture setting is selected, corresponding with specific factory settings of
Contrast, Colour, Sharpness,
Dynamic Contrast and Colour enhancement.
V ¬
P
1
4
7
i
2
5
8
0
SMART
ACTIVE
CONTROL SMART
M h a
3
6
9
0
Personal refers to the personal preference settings of picture and sound selected in the picture and sound menu.
Remark: the moment you are in a predefined smart sound or picture setting and you modify a setting in the picture or sound menu, all values of the menu will overwrite the previously made Personal settings. The predefined factory settings remain unchanged.
h
Active control
Active control is a pro-active and automatic system.The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.Thanks to the Ambient Light Sensor which measures the light conditions of the room, the contrast, dynamic contrast, brightness and colour picture settings are adjusted automatically. The light sensor is active when the Active control function is switched to Medium or Maximum.
Press the h key repeatedly to select the Active Control values Off,
Minimum, Medium (recommended) or Maximum.
Off
Sharpness and Dynamic Contrast are controlled automatically
Minimum Sharpness, Dynamic Contrast and Noise Reduction are
Medium Sharpness, Dynamic Contrast, Noise reduction and Colour are controlled automatically.
Maximum Sharpness, Dynamic Contrast, Noise reduction, Colour and
Contrast are controlled automatically.
Press the cursor right to select
INFO+
.
The Active Control demo menu appears.
The picture settings are being adapted continuously and automatically.
The menu items cannot be selected.
The sliders will be moving, showing how the TV is tweaking the current picture. None of the sliders is user controllable.
Press the OK key to switch off the Demo.
Use of the remote control
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 6
Use of the menus and the menu system
x
OK
V w
B
VCR DVD AMP AUX
b S fi
¬
1
4
2
5
b
MENU
Ï
CH
3
6
return or switch main menu on/off cursor to select adjustments
OK
key to activate
&
Press the
MENU
Ï key on the remote control to summon the main menu.
Note: Should your remote control be lost or broken you can still use the keys on top of the TV. See p. 2.
é
Use the cursor in the up/down direction to select the TV,
Settings, Install or Demo menu.
Note: Sometimes not all the menu items are visible on the screen.
Press the cursor down to reveal all items.
“
Use the cursor left/right to select the menu item.
‘
Use the cursor up/down again to select the control you want to select or to adjust. For instance, see Picture menu.
(
Press the
MENU
Ï key to turn off the main menu.
The menu system
Pipes, balls and a puck
puck pipes
Direct selection and control
Menu items are controlled as soon as they are selected by the puck. Only a few items require information with the OK key.
balls
List controls
Picture Sound Features
TV
The hierarchy of menus and controls is represented by an animated visual mechanism of pipes, balls and a puck. Unlike a map, however, the animated mechanism constantly shows the current whereabouts, continually expands the view of the immediate neighbourhood.
The puck surrounds the ball indicating the user’s current position in the menu hierarchy.The puck is always present when the menu system is displayed.
The puck is divided into 4 parts.They correspond to the directional controls (up/down, left/right) on the remote control.The arrows on the cursor indicate which directions to choose. In this way users can navigate through the menu hierarchy to the control they wish to adjust.
When menu items are more numerous than can fit comfortably on the TV display, only a portion are shown.
Those omitted are indicated by a cluster of balls which indicates that there are ‘more’ below.
Digital options
100 Hz Dig. Scan
Pixel Plus
Double lines
A list control is used to select one or more items from a list of options. Press the right key to move the puck into the list. At least one item is the current value and is highlighted.
Moving the puck up or down with the up/down key causes the list to move up or down.
Installation
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 7 i w
B
VCR DVD AMP AUX
b S fi
PIXEL
PLUS
x
OK
V
MENU
Ï
¬
CH
1
4
7
i
8
0
2
5
SMART
M q
SMART
a
3
6
9
0
Ï
Menu Info
&
Press the
MENU
Ï key and select a menu item or submenu item.
é
Press the i key on the remote control to get information about the selected menu item.
“
Press the i key again to exit.
Remote Control Info
&
Press the
MENU
Ï key.
é
Press the i key.
“
Press any key on the remote control (except the cursor keys, the OK, the
MENU
Ï, the digit, the i and the B keys) and you get information about the pressed key.
The normal function of the key is not executed.
The moment one of the remote control keys which do not invoke remote control info, is pressed, remote info is cancelled.
‘
Press the i key to display the menu that was on screen before a remote control key for info was pressed.
Select the menu language
PIXEL
PLUS
x
OK
V w
B
VCR DVD AMP AUX
b S fi
¬ b
MENU
Ï
CH
Install
1
4
7
i
8
0
2
5
SMART
M q
SMART
a
3
6
9
0
Language
English
....
.....
&
Press the
MENU
Ï key on the remote control.
When you switch on your TV for the first time and no channels are stored so far, the menu Language automatically appears on the screen. This menu also has an additional item
Exit
with which the menu can be dismissed. The explanation appears in different languages one at a time. Choose your preferred language and press the OK key on the remote control. Proceed with the Install menu.
é
Use the cursor down to select
Install
.
“
Use the cursor right to select
Language
.
Follow the instructions on screen.
‘
Use the cursor up/down to select your preferred language and press the OK key to confirm your selection.
(
Proceed with the
Install
menu.
Installation
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 8
Store TV channels
Automatic install
Install
Install Start
Automatic installation
&
Select
Automatic installation
in the
Install menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter your PIN to unlock all channels. (See TV, Features menu, Child lock, p. 15.)
é
Press the cursor down.
The autoprogramming option label
Start
appears.
“
Press the cursor right.
‘
The message
Searching
appears and the progress of autoprogramming is displayed.
You can now search for and store the TV channels in two different ways: using Automatic Installation or
Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.
When the Automatic installation is complete, the puck navigates to Install again.
The channel list is automatically filled with all the channel numbers of the TV channels transmitted.
Note: Channel numbers and names will always be written in Latin characters, even when a language has been selected which uses other characters.
Manual installation
Manual install
Install
System
Channel
Search
Fine tune
Antenna level
Store
Searching for and storing TV channels is done channel by channel.You must go
through every step of the Manual
Installation menu.
Press the i key on the remote
control to get information about the selected menu item.
&
Select
Manual installation
in the Install menu.
é
Press the cursor down.
Follow the instructions on screen.
Note: Search or direct selection of a TV channel. If you know the frequency, enter the
3 digits of the frequency directly with the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed.
Repeat to search for another TV channel.
Installation
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 9
Give name
VCR1
BBC1
BBC2
CNN
TVE
π
.....
p π
®
Space
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
®
Shift
®
Delete
1 2 3
4 5 6
7 8 9
0
(
®
Special)
It is possible to change the name stored in the memory or to assign a name to a TV channel for which a name has not yet been entered. A name with up to 5 letters or numbers can be given to the channel numbers 0 to 99. For example SUPER, BBC1,... Before channel number 0 you can also enter a name for the peripherals that are connected to an external input.
&
Select
Give Name
in the Install menu and press the cursor down.
é
Select the channel number.
Note: keep the cursor up/down pressed to scroll through the channel list and to avoid that the TV tunes to each channel passed by.
“
Press the cursor right.
A keyboard appears on the screen. Only
European characters are displayed.
Note:
- Dependent on the language selected in the language menu, the key
Special
is available or not.
- When having selected Arabic, you can toggle the
Special key to display Arabic or English characters. The
Shift
key is changed to
More
.
Press the More key to toggle between part 1, 2 or 3 of the Arabic character sets.
Press the cursor right to enter the keyboard.
Press the cursor up/down, left/right to select the first character and press OK. Repeat for every character you want to enter.
Select
Space
to enter a space;
Delete
to erase the highlighted character in the name entered;
Shift
to display upper- or undercast characters on the keyboard;
Special
to display special characters on the keyboard.
Press OK to confirm.
‘
Press the cursor left repeatedly when you have finished the name giving of the selected channel or peripheral.
(
Select another channel number and repeat steps
“ to
‘
.
Reshuffle the channel list
According to your preference you can change the order of the stored TV channels.
&
Select
Reshuffle
in the
Install
menu and press the OK key.
é
Follow the instructions on screen.
Select Favourite TV channels
&
Select
Favourite channels
in the
Install
menu.
é
Select your channel number with the cursor up/down.
“
Select
Yes
or
No
with the cursor right.
‘
Repeat
é and
“ for every TV channel or external you want to make a favourite or a non-favourite TV channel or external.
Installation
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 10
Install TV Setup
Setup
Speakers General Source
Test tone
Front left volume
Front right volume
(Centre volume)
(Surround volume)
Centre mode
Surround speakers
Auto surround
Speakers
Availability of Speaker menu items
Test tone
Front left volume
Front right volume
Centre volume
Surround volume
Centre mode
Surround speakers
• • • • •
• • • • •
• • • • •
• • •
• •
• • • • •
• •
Ster eo
3 Ster eo
3D Sur round
Hall
Pr o Logic
The Setup menu contains items that control the settings of the TV’s functions, features, services and peripherals you may have connected.
The
Speakers
menu reflects the speaker-related controls.
The
General
menu allows you to change settings that will typically be accessed only occasionally.
The
Source
menu allows you to select a source and/or to name each input source.
In order to receive the full reproduction capability of true Dolby Surround Sound you should include the proper use and arrangement of the speakers:
• via the TV and its internal Front right,
Centre and Left speakers and two amplified rear surround speakers connected to the back of the TV;
• or via the Variable Line Out connectors and an external Dolby amplifier. See External speakers/Amplifier, p. 23.
Select the various Speakers menu controls to setup the configuration of the TV’s speakers system for Dolby audio playback.
Each volume control can be adjusted to match test tone levels. Depending on the output and
Surround mode (see Main menu,TV, Surround,
Sound mode, p. 14) selected, some menu items may be greyed out and are not selectable.
Test tone and Volume controls
The menu item
Test tone
enables you to have a reference of the speakers loudness and to adjust the level of each until they are balanced in loudness.The speakers activated light up in the screen graphic.
&
Select
Test tone
with the cursor down.
é
Press the cursor right to select
On
or
Off
.
“
When turned
On
, the Test Tone control generates a sound test signal that circulates through the individual active speakers in a clockwise direction, and is meant to be used with the adjustable volume controls.
Once turned on, the Test Tone will continue to circulate through the Left, Centre, Right and both Rear surround speakers (if present).
‘
Press the cursor up/down to select the desired speaker for individual volume level adjustment.
(
Press the cursor left/right to adjust the volume level.
§
Continue and select the other speakers for adjustment as desired.
è
Press the cursor up to return to the Test
Tone menu item when speaker adjustments are complete and turn the control Off.
Installation
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 11
Centre Mode
See Connect Peripheral Equipment, External
Speakers, Amplifier, p. 23.
If no external amplifier with front speakers is connected, do not change the predefined factory settings which is
Centre mode No
. If an external amplifier with front speakers is connected, select
Centre mode Yes
.
In this setting, the centre channel in surround mode is directed to all three internal TV speakers (left, centre and right).
Surround Speakers
See Connect Peripheral Equipment, External
Speakers, p. 23. If no Surround Speakers are connected do not change the predefined factory settings which is
Off
. If Surround
Speakers are connected select
On
.
Dolby Pro Logic and Hall are not available if Off is selected.
General
Setup
Menu background
Smart surf
Dual screen format
Multipip format
Freeze format
Factory settings
Tilt adjust
OSD
Channel title
Teletext level 2.5
Set/Change code
(Colour)
(PLL)
General
This menu allows you to change various settings that are presumably adjusted less frequently than most other settings.
Press the i key on the remote
control to get information about the selected menu item.
Auto Surround
Sometimes the broadcaster transmits special signals for Surround Sound encoded channels.
The TV automatically switches to the best surround sound mode when
Auto Surround
is switched
On
.
However it is possible to overwrite this setting.
Dual screen format
The Dual screen and PIP functions allow you to view two TV channels or sources at one time, hearing audio from the main screen through the speakers and audio from the other screen through the headphones.This menu allows you to select the preferred format which can then be displayed toggling the b key on and off. See Dual screen/PIP, p. 16.
&
Select
Dual screen format
with the cursor down.
é
Press the cursor right.
“
Select Dual screen, Large PIP, Medium PIP or Small
PIP with the cursor up/down.
When Dual screen is selected, and Dual screen mode is activated with the remote control b key, the TV splits the screen into two equally sized screens.
When a PIP mode is selected, and Dual screen mode is activated with the remote control b key, the TV shows a full screen of video with a small, medium or large window of video on top of it.
Note: Continuing to hold the
b key down will also cycle
the TV through the various formats (Dual screen, Large
PIP, Medium PIP, Small PIP) launching a new format after each second the key is hold. Changing the format this way does not store the selected format.
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 12
Multipip format
In this menu you can select which format you prefer to see in Multipip: PIP 3 or PIP 6, referring to the number of PIP screens being displayed pressing the fi key on the remote control.
Note: Continuing to hold the fi key down will
also cycle the TV through the various formats.
Changing the format this way does not store the selected format.
&
Select
Multipip format
with the cursor down.
é
Press the cursor right and select PIP 3 or
PIP 6 with the cursor up/down. See Multipip, p. 17 how to operate.
Freeze format
Freeze format allows you to select among three options:
Freeze
,
Replay
,
Photo finish,
to be activated when you press the
S key on the remote control. See p. 3.
In this menu you can select which option you prefer.
Note: Continuing to hold the
S key down will
also cycle the TV through the various formats. Changing the format this way does not store the selected format.
&
Select
Freeze format
with the cursor down.
é
Press the cursor right and select Freeze,
Replay, Photo finish with the cursor up/down.
Source
Setup
Source
AV1
AV2
AV3
AV4
Side
This menu allows you to select the peripheral you connected to one of the external inputs.
Demo menu
TV
Setup
Demo
Install
Auto demo
Dual screen
Freeze-Replay-Photo finish
PIP
Zoom
Teletext
Install
Main menu
Picture
Speakers
Active control
Dealer demo - Digital options
- Light sensor
- Comb filter
&
Select
Source
with the cursor right.
é
Press the cursor down to select one of the external inputs.
“
Press the cursor right to enter the list of names of peripherals attached to the selected input.
‘
Select the peripheral device with the cursor up/down.
Once you have selected the source, e.g.VCR, this AV-input will automatically be selected when your remote control is in VCR mode and when you press the v key on the remote control. See p. 24.
The Demo menu allows to demonstrate the TV features separately or in a continuous loop.
&
Select
Demo
in the Main menu with the cursor down.
é
Select
Auto demo
or one of the features with the cursor right and press the OK key on the remote control.
If
Auto demo
has been selected the demo will automatically present all the features sequentially in a loop.
Press one of the cursor keys to stop the Auto demo.
If one of the features has been selected, this particular feature demo will run one time only, until activated again, and the Demo menu will reappear.
Select Dealer Demo
Select
Digital options
,
Light sensor
and
Comb filter
On or Off to really see the difference in picture quality.
In Dealer Demo mode it is possible to change channels with
- CH +
and to adjust the volume.
Note: the Dealer Demo is not part of the automatic sequence and can only be activated separately.
12
Use of the menus
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 13
TV menu
PIXEL
PLUS
x
OK
V
1
4
w
B
VCR DVD AMP AUX
b S fi
¬
2
5
3
6
b
MENU
Ï
CH
return or switch main menu on/off cursor to select adjustments
OK
key to activate
Picture Sound Features
TV
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Smart picture
Picture format x
Digital options with PAL signals
Although Pixel Plus is the most ideal setting, it may be preferable, dependent on your own preference, to select Double lines, or 100 Hz
Digital Scan.
•
100 Hz Dig. Scan
= 100 Hz + Dig. Scan (Field and line flicker reduction) without motion compensation.
•
Pixel Plus
= creates near High Definition performance inside the TV on the basis of a regular input signal.
The number of lines are increased and the number of pixels on a line are doubled in combination with Digital Natural Motion. As such Pixel Plus enhances both regular broadcast signals and DVD or Digital TV input towards unparalleled sharpness and depth, near High Definition and natural detail.
•
Double Lines
= provides for a doubling of vertical and horizontal resolution which adds astonishing sharpness and a total absence of visible picture lines.
Motion compensation reduces jitter and offers smooth, yet sharp motion reproduction.
Press the
MENU
Ï key on the remote control to summon the main menu.
Use the on-screen Menu-Info, see p. 7, for more information about the menu items.
Picture menu
Press the cursor right to select
Picture
.
Select the menu items in the Picture menu with the cursor up/down.
Adjust the settings with the cursor left/right or enter the list of submenu items with the cursor right.
Select a submenu item with the cursor up/down.
Note: To remove the menu background before adjusting the picture settings, see Select TV setup,
General, p. 11.
Digital options with NTSC signals
x
•
Progressive Scan
= line doubling eliminates line flicker.
•
Pixel Plus
Note:
- Pixel Plus is not active when Multipip, Teletext
(Except when Subtitling is activated) or Teletext
Dual screen is selected.
- When having selected Pixel Plus, the size of the menus on screen is reduced. This is a normal behaviour.
- Interference, caused by fluorescent lights just above the TV, may occur when having selected Pixel Plus.
The modified adjustments for Contrast,
Brightness, Colour, Sharpness,Tint, Digital options and Dynamic Contrast are automatically stored.
Select
Factory settings
in the Setup menu,
General, to restore the predefined factory settings, see p. 11.
Use of the menus
13
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 14
Sound menu
TV
Volume
Equalizer
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(3D effect)
AVL
Delta volume
Smart sound
Sound
Surround Modes
Dependent on the sound signal broadcasted, select one of the Surround modes.
Stereo
This mode reproduces only the left and right front sound signals.
You only hear a stereo sound if the broadcast which you are receiving is transmitted in stereo or nicam stereo.
Dolby 3 Stereo
(optimal with Dolby Surround broadcasting)
The sound signal is now distributed over the front left, the front right and the centre TV loudspeakers.
The rear loudspeakers do not produce any signal.
3D Surround
(optimal with Dolby Surround broadcasting)
3D Surround enables you to experience the effect of
Dolby Surround Pro Logic* without the need of having rear speakers connected or activated.The graphical representation of the rear loudspeakers is replaced by the symbol
®r.
Select the level of 3D effect with the cursor left/right.
14
Use of the menus
Press the cursor right to select
Sound
.
Select the menu items in the Sound menu with the cursor up/down and adjust the settings with the cursor left/right.
Remember, control settings are at normal mid-range levels when the bar scale is centred.
Note:
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo transmission.
- Nicam/Analogue is only selectable in case of Nicam transmission.
- Surround modes can not be modified when a headphone has been connected.
Hall
The special sound signal is distributed over the rear loudspeakers which creates a hall effect from the rear.
The centre loudspeaker does not reproduce any signal.
This mode is recommended when you wish to add surround sound to a broadcast which is not encoded Dolby Surround or to a mono signal.
Pro Logic
(with Dolby Surround broadcasting)
In addition to the left and right internal speakers, the centre and the rear surround loudspeakers reproduce the Dolby
Surround Pro Logic sounds.
This sound is always present in the movie or programme marked with G Dolby
Surround.This mode is especially recommended for such programmes or movies.Dolby Pro Logic signals are also present on some DVD tracks.
Note: Normal stereo broadcast is not always encoded to produce a rear surround sound.
Pro Logic and Hall can only be reproduced if
Surround speakers is set to Yes in the Setup, Speaker menu, p. 11, and rear speakers are connected.
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 15
With two extra front loudspeakers connected
To enhance the sound reproduction of your TV you may connect two extra front loudspeakers via an external amplifier. See Connect Peripheral Equipment,
Extra loudspeakers/Amplifier, p. 23.
In the Surround modes
+ ext. amp
is added to indicate that you should switch on your amplifier as in these modes the internal TV speakers produce only centre sound.The subwoofer speaker is muted.
Note: If extra front speakers are connected and selected, all internal TV speakers produce centre sound in the surround modes Pro Logic*, Dolby 3 Stereo and 3D
Surround.
*
‘Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Features menu
TV
Channel list
Subtitle
Sleeptimer
Child lock
On timer
Features
Lock
Custom lock
Unlock
Channel lock
Press the cursor right to select
Features
.
Select the menu items in the Features menu with the cursor up/down and adjust the settings with the cursor left/right.
Use the on-screen Menu-Info i for more information about the menu items.
Channel list
Press the OK key to switch over to the selected
TV channel or external.
Select subtitles
Switch on teletext and select the proper subtitle page from the index.
Switch off teletext.Now the subtitle page is stored for the selected TV channel.
Once subtitles have been stored and
Subtitle
On
has been selected they will automatically be displayed on the selected TV channels if subtitles are in the transmission.
A symbol will indicate that the mode is on.
Select
On during mute
when you want to have the subtitles automatically displayed when the sound has been muted with the ¬ key on the remote control.
Child lock
&
Select
Child lock
with the cursor down.
é
Press the cursor right to enter the Child lock menu.You’re summoned to enter your code.
Enter the access code.
Note:You have to re-enter your code each time you enter the child lock menu.
Important:You have forgotten your code !
• Select Cancel with the cursor down.
• Select Set/Change code in the Setup menu. See General menu, Set/Change code, p. 11.
• Press OK.
• Press the cursor right and enter the overriding code 8-8-8-8.
• Press the cursor again and enter a new personal 4-digit code.The previous code is erased and the new code is stored.
Note: The overriding code only works in the
Set/Change code menu.
“
Select one of the menu items of the child lock menu.
• Select
Lock
if you want to lock all channels and externals.
• Select
Custom lock
and press the cursor right. Select
Channel lock
if you want to lock the programmes from a certain TV channel or external.
• Select
Unlock
to unlock all locked channels and externals at once.
Use of the menus
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 16
On timer
On timer
Off
On
VCR1
BBC1
BBC2
CNN
TVE
π.....
Sunday
Monday
.......
Daily 15:45
&
Select
On timer
with the cursor down.
é
Select
On
with the cursor right.
“
Press the cursor right again to enter the channel list.
‘
Select the TV channel or external you want your TV to switch to on a selected time and day.
Dual screen/PIP
b v
B
VCR DVD AMP AIX
b S fi
®
PIXEL
PLUS
x
Ò ‡ π † b
OK
MENU
Ï
Press the b key to turn on or off Dual screen or PIP, according to the format selection made in the Dual screen format list in the General menu, p. 11.
Audio from the main screen (the left screen in Dual screen and the full size screen in PIP) plays to the speakers; Audio from the right screen or from the PIP plays to the headphones.
Note: Continuing to hold the
b key down will
cycle the TV through the various formats (Dual screen, Large PIP, Medium PIP, Small PIP), launching a new format after each second the key is held down.
To highlight a screen
Pressing the cursor left/right will toggle the highlight between the left and the right screen or between the main and the PIP screen.The highlighted screen is made visible with a yellow border.
(
Press the cursor right again to select a day of the week or to select
Daily
.
Select
Daily
to set the On timer for daily operation on the selected TV channel or source.
§
Press the cursor right once again to enter the time.
è
Enter the time with the digit keys or with the cursor up/down/left/right.
!
Press the
OK
key to activate.
ç Press the
MENU
Ï key to turn off the menu.
Note: To check your timer settings, press the i
key
Changing TV channels or external sources in left, right or PIP screen
Press the
- CH +
key, the digit keys or the 0 key in order to change the TV channels or the external sources in the highlighted screen.
Making the PIP screen movable
&
Select a PIP format.
é
Highlight the PIP picture with the cursor left/right and press the
OK
key to make the PIP screen movable.
The PIP screen can now be moved.This is made visible with a blue border around the PIP screen.
“
Press the cursor up/down, left/right to move the PIP screen in the direction of the cursor press.
‘
Press the OK key again.The PIP screen position is fixed.
Swapping screens
Press the c key to swap the left and the right screen or the PIP screen. See notes below.
On-Screen information
The On-Screen information, which appears when changing channels, always refers to the highlighted screen.
Deactivating Dual screen mode
Press the b key again to return to a full main screen picture.The TV tunes to the picture which was highlighted in Dual screen mode.
Note: When Dual screen mode is selected, two picture formats are supported: Full screen or 4:3 letterbox picture format (vertical squeeze).
Dual screen
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 17
Multipip
PIP 3
PIP 6 v
B
VCR DVD AMP AUX
b S fi
®
PIXEL
PLUS
æ
Ò ‡ π † b
S j
In the Setup menu, General, p. 12 you selected which Multipip format you prefer to see.
fi
&
Press the fi key on the remote control to toggle the selected
Multipip format On or Off.
The main screen displays the channel or source tuned before Multipip was activated and the highlight is on the main screen.
é
Press the cursor left/right, up/down to highlight a PIP screen.When the highlight is on one of the PIP screens, it begins playing video and the other PIPs freeze.The main screen always continues playing audio and video.
“
Pressing the
- CH +
or the 0 key or the digit keys changes the channel or source for the currently highlighted screen.
Note: channels cannot be added or deleted from the Smart surf list when
Multipip is activated.
‘
Press the c key to swap the highlighted screen and the main screen.
Press the cursor up/down to display a following series of PIP screen.
Note: Only TV channels which are in the favourite list and pictures from the connected and activated externals are displayed in the PIP screen.
Teletext
b
S i
V ¬
(only English teletext supported)
v
B
VCR DVD AMP AUX
b S fi
® Ò
PIXEL
PLUS
x
‡ π † b
OK
MENU
Ï
CH
1
4
7
i
2
5
8
0
3
6
9
0
Q
U
INSTANT
Z q h c colour keys to select b
Ï
0 h
Most TV channels broadcast information via teletext.
This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time.
After each channel change, the memory is refreshed. It may take some time for all pages to load.
Depending on the TV channel, teletext is transmitted in different systems.The colours used in the bottom line of the teletext page correspond with the colour keys of your remote control.
Switch Teletext on and off
Press b to switch the teletext on or off.
The main index page appears on the screen.
It shows an information line at the top, an option line at the bottom and a puck in the top left corner of the screen.
puck
Mon 05 Feb 16.35.22
Menu
100 01
B B C C E E F A X
Search
LIONS RECORD ANOTHER WIN 430
Index
BBC Info
Children
Cookery
Education
Lottery
Finance
Music
Red
100
110
120
150
200
230
240
280
Green
News
Headlines
Weather
Sports
Radio
Travel
Subtitling
TV Listings
Yellow
300
305
400
415
500
550
888
600
Blue
Multipip & Teletext
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 18
Select a Teletext page
With the digit keys
Enter the desired page number with the digit keys.
The page counter seeks the page or the page appears immediately when the page number has been stored in the memory.
A message appears when you have entered a non existent or incorrect page number. Page numbers beginning with 0 or 9 do not exist.
Choose another number.
With the option line
Select with the colour keys, corresponding to the coloured options at the bottom of the screen, the desired subject.
Quickly run through the txt pages
Press the cursor up/down or the
- CH +
key to run through the previous or the following pages.
Select the previously selected page
Press the 0 key.
Note: Only possible when teletext pages are active, not when the Teletext menu is displayed.
Select the index teletext page
Press the grey colour key † to display the main index (usually p.100).
Select subpages
When a selected teletext page consists of different subpages, one of the subpages appears on the screen.
Press the cursor right to highlight the subpagenumber. Press the cursor up/down to select the next or previous subpage or enter the subpagenumber with the digit keys.
Special teletext functions
Hold
Press
S to stop the automatically rotating of the subpages or to stop the page counter from seeking when you have entered a wrong page number or when the page is not available. Enter another page number.
Enlarge
Press h repeatedly to display the upper part, the lower part and then to return to the normal page size.When the upper part is displayed, you can scroll the text, line by line using the cursor up/down.
Hypertext
With hypertext you can select and search for pages containing any word or number on the current teletext page.
&
Make sure you are not in the teletext menu and that the puck is in the upper left corner of the screen.
é
Press the cursor key down to highlight the first word or a number on the page.
“
Use the cursor up/down, left/right to select the word or number you want to search for.
‘
Press the OK key to confirm.
A message appears at the bottom of the screen to indicate that the searching is going on or that the word or page is not found.
Select Continuous Subtitles
TV channels with teletext often transmit programmes with subtitling. For each TV channel you can store a subtitle page.
Switch on teletext and select the proper subtitle page from the index.
Switch off teletext. Now the subtitle page is stored for the selected TV channel.
Select
Subtitle On
or
Off
in the Features menu, see p. 15.The subtitle symbol j appears when
Subtitle On is selected.
18
Teletext
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 19
Teletext menu
(only available in full screen teletext mode)
&
Press the Ï
MENU
key to activate the menu.
é
Press the cursor up/down to select the menu items.
Favourite
This list contains up to eight favourite teletext pages. Only the pages of the current channel can be selected.
&
Press the cursor right to add the current page or to select one of the favourite pages to the list.
é
Press the OK key or the cursor right again to add.
“
Press the cursor left to return to the
Teletext menu.
Search
On the keyboard on screen you can type in a word you want to search for in the teletext pages.Whether upper- or lowercase is used has no influence. Searching for pagenumbers is not possible.
puck
Mon 05 Feb 16:35:19
Menu 100 01
Favourite
WORD
Accept NAME
T E L E T E X T
FOOTBALL
Space
A B C D E F G 1 2 3
11.03
........................
H I J K L M N 4 5 6
O P Q R S T U 7 8 9
14.35
........................ 226
Red
Shift
Green
Special
Yellow Blue
&
Press the cursor left/right, up/down to select the characters, words or functions.
é
Press the OK key to confirm each character selected.
“
Select
Cancel
to cancel the word or character selected;
Space
to enter a space;
Delete
Shift
to delete the last character selected; to switch between undercast or capital characters;
Special
to display special characters on the keyboard.
‘
Press the cursor left repeatedly to return to the Teletext menu again.
Searching a word
&
Type in the word on screen or select a word from the history list on the right and press
OK.
é
Select
Accept
and press OK again.The
message
Searching
appears.When the word is found, it is highlighted in the teletext page.
“
To continue the search, press the OK key twice.When a word is not found, a message appears.
‘
To search for a new word, select
Keyboard
and press OK. Select the new word.
Reveal
Reveals/conceals hidden information on a page, such as solutions to riddles and puzzles. Press the OK key to activate. Press OK again to return to the Teletext menu.
Cycle subpages
Makes the subpages cycle automatically. Press the
OK key to activate and to de-activate again.
Window text
A limited amount of text is displayed at the bottom of the screen.
Press the
OK
key to activate.
Use the cursor up/down to scroll and press the cursor left to go back to the teletext menu.
Timed page
To display a specific page at a certain time.
&
Press the cursor right to select
Yes
or
No
.
é
Enter the time and pagenumber with the cursor keys or the digit keys.
Note: Teletext does not have to remain switched on. It is not possible to display a timed page when the TV is switched to standby.
Press the
MENU
Ï key to leave the Teletext menu.
Teletext
19
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 20
Connect Peripheral equipment
There is a wide range of audio and video equipment that can be connected to your TV.The following connection diagrams show you how to connect them to the back or the right side of the TV.
AV1
IN can handle CVBS and YPbPr; AV2
IN
CVBS and Y/C; AV3 and AV4
IN digital signals of a e.g. digital HD receiver or Progressive scan DVD; SIDE: CVBS and Y/C.
Recorder
75
3
CABLE
VIDEO
L / Mono
AUDIO
R
Monitor out
Y
Pb
AV 1 in
Pr
AV 2 in
S-VIDEO
OUT IN
OUT
REC
&
Connect the RF Antenna 1 to the
RF IN
socket of your recorder.
é
Connect another RF cable 2 from the output
OUT
of your recorder to the TV’s input 75 ø x jack.
“
Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for stereo equipment) AV cables 3 to the
VIDEO, AUDIO L
and
R
input jacks of
AV2 IN
.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
S-VIDEO
input instead of connecting the recorder to the
VIDEO
jack of
AV2 IN
.
S-Video does not provide audio, so audio cables must still be connected to provide sound.
75
Recorder and other A/V peripherals
2
4
TV x
IN
REC
S-VIDEO
L / Mono
AUDIO
R
Monitor out
Y
Pb
Pr
AV 1 in
AV 2 in
S-VIDEO
1
5
CABLE
OUT IN
OUT
&
Connect your recorder as described above.
The
MONITOR OUT
connectors can be used to record programmes from your TV 4.
See Record with your recorder, p. 24.
é
Connect the Video, Audio left and Audio right
(only for stereo equipment) cables to the
VIDEO
,
AUDIO L
and
R
input jacks of
AV1 IN
5 or the side connections (see p. 21).
Note: In case of mono equipment, only the left loudspeaker reproduces sound. Use a mono to stereo adaptor (not supplied) for sound reproduction via all internal loudspeakers.
20
Connect Peripheral equipment
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 21
Satellite Receiver
SAT
IN
2
OUT
VIDEO
L / Mono
AUDIO
R
Monitor out
AV 1 in
AV 2 in
Y
Pb
Pr
S-VIDEO
&
Connect the satellite antenna cable 1 to the satellite receiver’s
SATELLITE IN
jack.
é
Connect the Video, Audio left and right (only for stereo equipment), AV cables 2 to the
VIDEO
,
L
and
R AUDIO
input
AV1 IN
jacks.
If your satellite receiver has an S-VHS video jack:
For improved picture quality, connect an S-VHS video cable with the
S-VIDEO
input instead of connecting the satellite receiver to the
VIDEO
jack of
AV2 IN
.
≈
SAT
Satellite Receiver with a recorder
&
Connect your satellite receiver as described above.
75
OUT
IN
5
REC
VIDEO
Monitor out
L / Mono
AUDIO
R
OUT
IN
AV 1 in
Y
Pb
Pr
4
AV 2 in
S-VIDEO
OUT
≈
SAT
IN
SAT
3
CABLE
é
Connect the RF Antenna or Cable TV cable 1 to the
RF IN
socket of your recorder.
“
Connect another RF cable 2 from the output of your recorder to the TV’s 75 ø x jack.
‘
Connect the satellite antenna cable 3 to the satellite receiver’s
SATELLITE IN
jack.
(
Connect the AV cables 4 to the satellite receiver’s
AV OUT
jacks and to the VCR’s
AV IN
jacks.
§
Connect the recorder’s
AV OUT
jacks 5 to the TV’s
AV2 IN
jacks.
DVD player or other accessory digital source equipment
Monitor out
VIDEO
L
AUDIO
R
AV 1 in
Y
Pb
Pr
AV 2 in
S-VIDEO
Equipment with AV connectors only
&
Connect the video cables to the equipment’s
AV OUT
jacks and to the
TV’s
AV1
or
AV2 IN
jacks.
é
Connect the audio cables to the equipment’s
AUDIO L
and
R
jacks and to the
L AUDIO
and
R AUDIO AV1
or
AV2
jacks on the TV. (According to where you connected the video cables, to
AV1
or
AV2
.)
Equipment with an
S-VIDEO connector
&
Connect an S-video cable the
AV2
S-VIDEO
input.
Note: When using the
S-VIDEO
connector do not connect any device to the video input.
é
Connect the audio cables to the equipment’s
AUDIO L
and
R
jacks and to the
L AUDIO
and
R AUDIO AV2
jacks on the TV.
With Component Video Output Connectors
&
Connect the cables of your
YPbPr
equipment to the
YPbPr
input
AV1 IN
sockets on the TV.
Note: When using the YPbPr sockets do not connect any device to the video input of AV1.
Note: The YPbPr sockets on the TV are compatible with
480i (interlaced, 1 Fh) output signals only, not 480p
(progressive scan, 2 Fh).
é
Connect the Audio left and right (only for stereo devices) cables to the
AUDIO L
and
R
input of
AV1
.
Warning: Never connect a signal to the Y-input and video-input at the same time.This may cause picture distortion !
Equipment with Progressive scan output (480p or
1080i 2 Fh)
Connect the equipment to the
AV3
or
AV4 IN
jacks on the TV. See
AV3
or
AV4
Digital HD input, next page.
Note: The labels for the component video sockets may differ depending on the DVD player. Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player’s instructions for use for definitions and connection details.
Connect Peripheral equipment
21
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 22
AV3/AV4 Digital High Definition input
Y
Pb
AUDIO
L
RGB Y
Pb
Pr R Pr
AV 4
IN
L
AUDIO
R
AV 3
IN
VIDEO 2Fh
480p/1080i
When you have a digital equipment with a 480p or
1080i output (e.g. a digital Set Top Box or
Progressive DVD player), connect it to the
AV3
or
AV4 IN VIDEO
2 Fh 480p/1080i input.
Connect the equipment with 2 Fh RGB output to the
RGB
connector and to the
L
and
R AUDIO
jacks of
AV3
.
Connect the equipment with 2Fh YPbPr output to the
Y, Pb
and
Pr
jacks and to the
L
and
R AUDIO
jacks of
AV4
.
See also the manual of your High Definition equipment.
Note: This television is designed to accept high definition signal standards 1080i and 480p as specified by the
Electronic Industries Association standard EIA770.3 as well as 2Fh-signal standards 576p and 1152i.
Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, check if the connections are done in the right way.
The AV3 input can not be used to connect a computer or any other VGA device.
Side connections
S•VIDEO
VIDEO
AUDIO
1 2 3
&
Connect your camera or camcorder to sockets at the right side of your TV.
é
Connect the equipment to
VIDEO
2 and
AUDIO L
3 for mono equipment. For stereo equipment also connect
AUDIO R
3.
S-Video quality with an S-VHS, Hi-8 or Digital camcorder is obtained by connecting the
S-Video cables with the
S-VIDEO
input 1
(instead of
VIDEO
2) and
AUDIO
inputs
3.
Note: If you prefer, you can also connect the camcorder to one of the TV’s rear
AV IN
jacks.
Headphone
&
Insert the plug into the headphone socket L at the right side of the TV.
é
Press ¬ on the remote control to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5
mm jack.
In the
SOUND
menu select
Headphone volume
to adjust the headphone volume.
When the headphone is connected, the surround mode is always stereo.
Note:
When Dual screen/PIP is activated (see p. 16):
- if the main screen displays a TV channel picture, you hear the sound from the Dual screen/PIP picture through your headphone;
- if the main screen displays a picture from a peripheral equipment, you hear the sound from the main screen through your headphone.
Note: When using the
S-VIDEO
connector do not connect any device to the video input.
22
Connect Peripheral equipment
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 23
Connect external speakers/amplifier
Stereo amplifier and two extra
FRONT speakers
Surround speakers
AUDIO
S
AUDIO
To enhance the sound reproduction of your TV you can connect two extra speakers via an external amplifier.
&
Connect the audio cables to the audio input of your amplifier and to the
AUDIO OUT L
and
R
jacks at the back of your TV.
The output level is controlled by the volume control of your TV.
Note: Turn off the TV and your audio amplifier before connecting them.
Set the audio amplifier’s volume to minimum.
é
Select
Centre mode On
in the Setup menu,
Speakers, see p. 11.
See Sound menu, Surround mode, p. 14 for the available Sound modes.
“
Adjust the volume of the audio amplifier.
You may make use of the Test tone function in the Setup menu, see p. 10, to have a reference of the loudness of the separate speakers.
Note: Once you have adjusted the volume of the amplifier, do not change it while watching TV as the whole configuration operates with the volume adjustment of your TV.
To enjoy Dolby Pro Logic Surround sound, you can connect two rear speakers with built in amplifiers
(or an audio amplifier with rear speakers).
&
Connect the audio cables to the rear speakers and to the Dolby surround output S in the audio out grouping at the rear of your TV as shown above.
Note: Turn off the TV and the rear speakers before connecting them.
Rear Surround speakers should always be located behind or to either side about 1 m above the listener’s head.
é
Adjust the volume of the rear speakers.
Use the Test tone function in the Setup menu,
Speakers, see p. 10, to have a reference of the loudness of the surround speakers in relation to the other speakers.
Note: Once you have adjusted the volume of the rear speakers, do not change it while watching TV, as the whole configuration operates with the volume adjustment of your TV.
Dolby Pro Logic Surround amplifier
&
Connect the Dolby Pro Logic Surround amplifier to the
AUDIO OUT L
and
R
at the back of your TV.
é
Select
Centre mode Off
in the Setup menu,
Speakers, see p. 11.The audio output is now independent of volume, bass, treble and
Surround mode settings.
“
Turn off the volume of the TV with the mute key ¬.
All volume settings, tone control and speaker connections have to be done via the external
Dolby Pro Logic amplifier.
Connect Peripheral equipment
23
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 24
To select connected equipment
v v
PIXEL
PLUS
æ
B
VCR DVD AMP AUX
b S fi b
Equipment connected to the rear or on the right side of the TV
&
Press the v key to select
AV1
,
AV2
,
AV3
,
AV4
or
SIDE
, according to where you connected your equipment at the rear or on the right side of your TV.
é
Press the cursor up/down.
“
Press OK.
If you want to change to TV channels?
Enter the channel number of the TV channel which you want to watch with the digit keys.
VCR Control keys
VCR
®
Ò
‡
π
† v
B
VCR DVD AMP AUX
b S fi
®
PIXEL
PLUS
Ò ‡ π † b
OK
V ¬
MENU
Ï
CH
7
i
1
4
8
0
2
5
9
0
3
6
Most of the audio and video equipment from our range of products can be operated with the remote control of your TV.
Press the
VCR
,
DVD
,
AMP
or
AUX
key according to the equipment you want to operate with this remote control. See Use of the remote control, p. 3.
VCR keys
After you pressed the
VCR
key, press one of the VCR keys of the remote control:
® for record,
Ò for rewind,
‡ for stop,
π for play,
†
- CH +
for fast forward, for sequential channel selection from the video recorder tuner,
0 to 9 to select a channel number from your video recorder tuner,
These keys function with devices that uses the RC5 signalling standard.
Record with your recorder
To record S-VHS quality, connect an
S-VHS peripheral directly to the recorder.
Record a TV programme
You can record a TV programme using your recorder’s tuner without affecting your TV.
&
Select the channel number on your recorder.
é
Set your recorder to record.
See the handbook of your recorder.
Switching channel numbers on your TV does not disturb recording !
Record from
MONITOR OUT
You can record a programme on your recorder from the TV tuner via
MONITOR OUT
.
&
Switch on the equipment.
é
Select the correct channel on your TV and the correct input on your recorder.
“
Set your recorder to record.
You record the tuner channel of the TV, even when you switch to an AV input using the v key on the remote control.
Do not switch channels or switch off your TV when you are recording through
MONITOR
OUT
.
24
Record
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 25
Before Calling Service
Please make these simple checks before calling service.These tips may save you time and money since charges for television installation and adjustments of customer controls are not covered under your warranty.
Symptoms
“Ghost” or double images
Items to Check and Actions to follow
• This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture.
No power
No picture
• Check that the television's AC power cord is plugged into the mains socket.
• Unplug the television, wait for 60 seconds.Then re-insert plug into the mains socket and switch on the television again.
• Check antenna connections at the rear of the television to see if it is properly connected to the television input terminal. Is it properly secured to the appropriate antenna plug on the TV?
• Possible broadcast station trouble. Try another channel.Try running the
Automatic installation.
• Adjust the contrast and brightness settings.Try another smart picture setting.
• Check the v key on the remote control to make sure the correct signal source is selected.
Good picture but no sound
• Increase the VOLUME.
• Check that the television is not muted, press the ¬ key on the remote control.
• When no signal is detected, the television automatically switches off the sound.
This is proper operation and does not indicate a malfunction.
• Check if your speaker configuration corresponds with the selections made in the Speakers Setting, p. 10.
• No sound from the rear speakers or the centre speakers? Select an appropriate Surround mode, according to the broadcasted sound signal or adjust the volume (see Surround modes, p. 14)
• If you have attempted to hookup peripheral equipments, check the audio jack connections.
• Check if the headphone is not plugged in.
• Check if the channel is broadcasting good quality surround.
Good sound but poor colour or no picture
• Adjust the contrast and brightness setting.Try another smart picture setting.
Poor picture
• Sometimes, poor picture quality occurs when having activated an S-VHS camera or camcorder connected to the right side of your TV and another device is connected to
AV1
or
AV2
at the same time. In this case, switch off one of the other equipments.
Snowish picture and noise
• Check the antenna connection.
Horizontal dotted line
• This may be caused by electrical interference (e.g. hairdryer, nearby neon lights, etc.)
• Switch off the equipment.
One white line across the screen
• Switch off the television immediately and consult a qualified service personnel.
Television not responding to remote control
• Check whether the batteries are working. Replace if necessary.
• Clean the remote control sensor lens on the television.
• Operating range between television and the remote control should not be more than 240”.
• You can still use the M key and the -/+ keys at the top of your TV.
• Press the v key to be sure your remote control is in the TV mode.
If your problem is not solved
:
Turn your TV off and then on again.
Never attempt to repair a defective TV yourself
.
Check with your dealer or call a TV technician.
Before calling service
25
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 26
Tips
Care of the screen
Clean the TV with a slightly damp soft cloth. Do not use abrasive solvent as it can damage the TV screen.
End of life directives
We are paying a lot of attention to using environmentally-friendly production methods.
Your new TV contains materials which can be recycled and reused.
At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials that must be disposed.
Please ensure that you dispose of your old TV according to local regulations.
How to dispose of batteries?
The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.
Glossary
Active Control
Measures and corrects incoming signals in order to provide the best picture quality settings.
AVL
Automatically controls the volume level to avoid too large level differences, especially during commercial breaks.
Display
An on screen message or graphics that help the user operate and adjust TV feature controls. See
On Screen Displays (OSD).
DNR
Digital Noise Reduction.
By encoding signals digitally in 100 Hz sets, it is possible to clean up picture noise.This is especially beneficial in poor signal areas and when viewing poor quality video tapes.
Dolby Surround Pro Logic
Literally wraps you in 4-channel sound. it brings your favourite movies to life with all the realism and impact of cinema sound as though you are part of the action.
Hue
TV-function to modify the general colour balance between cool and warm and to adjust it according to your personal preference.
Menu
An on-screen listing of feature controls shown on the TV screen that are made available for user adjustments.
Picture and Sound Controls
Keys on the remote control to select predefined picture and sound settings.
The Eco picture mode is intended to lower power consumption of the TV and to improve picture quality of low quality digital sources.
Picture Freeze
TV mode which allows you to “freeze” a certain image in order to study a specific detail at ease, e.g. to make notes of certain programme information like phone numbers.
Programming
The procedure of adding or deleting channel numbers into the TV’s memory circuits. In this way the TV ‘remembers’ only the locally available or desired channel numbers and skips over any unwanted channel numbers.
26
Tips & Glossary
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 27
Specifications
Picture tube size
Picture visible area
TV system
Playback system
Antenna input
Operating voltage,
Frequency
Power consumption
Audio Output
29PT9420
29” (740 mm)
27” (680 mm)
3,58 NTSC / 4,43 PAL
3,58 NTSC / 4,43 PAL
75 ohms - co-axial
Refer to the specifications at the back of the TV
Refer to the specifications at the back of the TV
4 x 15 W (left, right, centre, subwoofer)
708 mm
570 mm
500 mm
49 kg
34PT9420
34” (860 mm)
32” (810 mm)
3,58 NTSC / 4,43 PAL
3,58 NTSC / 4,43 PAL
75 ohms - co-axial
Refer to the specifications at the back of the TV
Refer to the specifications at the back of the TV
4 x 15 W (left, right, centre, subwoofer)
841 mm
664 mm
552 mm
70 kg
Dimension:
Width
Height
Depth
Nett weight
(aprrox. only)
International guarantee conditions
This product is guaranteed by Philips for a period of one year after the date of purchase against defects due to faulty workmanship or materials.The guarantee covers both parts and labor.
Service under guarantee is only provided upon presentation of reasonable evidence (e.g.
completed guarantee card or purchase receipts) that the date of the claim is within the guarantee period.
The guarantee is not valid if the defect is due to accidental damage (including in transport), misuse of neglect and in case of alterations or repair carried out by unauthorized persons.
The guarantee may not apply if the product requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized or if any damage results from these modifications.
Service (during and after guarantee) is available in all countries where this product is officially distributed by Philips. In countries where Philips do not distribute the product, the local Philips
Service organization will also provide Service although there may be a delay if the appropriate spare parts and technical manual are not readily available.
These statements do not affect your statutory rights as a consumer.
In the event of difficulty please contact the Philips Information Centre in any country (see enclosed addresses).
Specifications
27
315 2145.3 (16X24) 31-10-2002 08:43 Pagina 28

Public link updated
The public link to your chat has been updated.
Advertisement