VEOS P500
CONTENTS
Feature (SK-P500 AI SERIES)
Warning & Caution
Warning
Caution
Configuration
Accessories
Wall mount (How to install 1)
Wail mount (How to install 2)
Ceiling mount (How to install 1)
Ceiling mount (How to install 2)
Function (SK-P500 AI SERIES)
Dimension (Wall mount)
Dimension (Ceiling mount)
Specification (SK-P500 AI SERIES)
Troubleshooting
Warranty card
FEATURE (SK-P500 AI)
1. Long v is ib le r a n g e a t night.
(50m Max. indoors, 40m Max. outdoors)
2. You can select the level of LED ON/OFF and f i lt e r change according to Lux as
follow.
Level 1
Level 2
LED ON
8Lux
5Lux
LED OFF
18Lux
15Lux
Level 3
3Lux
13Lux
In case of selecting "Level2"
- LED turn on: under 5 lux automatically
- Filter changed into B/W mode at 5 lux, 2 seconds a f t e r becoming 5 lux.
- Filter changed into colo r mode at 15 lux 5 seconds a f t e r becoming 15lux,
3. This camera adopts split glass technology to prevent IR light reflection.
4. This camera has v a r i- fo ca l I R lens to prevent defocusing under IR lighting.
5. IR cut filter is removed at night to receive 100% light.
6. This product can match for any circumstances very well.
7. This product is suitable for 24 hours surve illance with optical multi-coating
f i l t e r according to IR LED and CCD.
8. This product is weather proof to resist rain, snow and other weather factors.
(IP65)
9. This product is made of corrosion-free surface to resist rust and corrosion for a
long time.
10. Sun visor of this product can help the camera get the picture c le a r ly .
11. D&N mode, M ir r o r , P h a s e s h i f t , BLC, ALC/ELC, FLK, Color bar chart, AGC
functions are contro l lab le from outside by OSD menu.
12. Power & video c a b le s are concealable ( Ca b le t hrou gh b r a c k e t ) .
13. This camera adopts 3-axis bracket to install on the ceiling and wall.
14. You can connect 24V AC or 1 2 V DC regardless polarity. Line-Lock function is
available when you use 24V AC power supply.
15. This camera supports the advanced high resolution (550 TV Line- Color) by HQ1
DSP of SONY.
16. You can adjust the level of IR LED according to the circumstances,
17. A heater enables the camera to keep the proper operation at low temperature.
-Heater ON/OFF temperature.
ON
o
OFF
1st Heater
23 C
28oC
2nd Heater
5oC
10oC
*ON/OFF point of heater is subject to environment.
18. A fan enables the camera to keep the proper operation at high temperature.
(option) -Fan ON/OFF temperature.
ON
Fan
o
45 C
OFF
40oC
*ON/OFF point of fan is subject to environment.
WARNING & CAUTION
- Follow the instructions -
Please follow below instructions for safe use.
Information
Read this user guide c a r e f u l l y before any in s t a lla tio n for safe o pe r a t io n of
product.
Indicating the possibility of serious injury or death.
Indicating the possibility of injury or material loss.
* This camera should be used only for the security surveillance.
WARNING
- Please study the instruction manual be fore
your applications and keep it for your fut ure
reference.
- Do not flash LED light directly on the eyes
when LED’s are on.
- Do not install the camera on a unstable
surface. It will cause falling or other hazards.
- Do not use improper power, it could cause fire
or electric shock.
- Do not disassemble or re-model the camera, it
could cause fire, electric shock or other
hazards.
- Stop using the camera when you find a
malfunction like smoke or unusual heat, it
could cause fire or electric shock.
CAUTION
- Do not adhere dangerous articles to the camera
- Do not leave the unit along an unstable stand
or table.
- DC power cable or Video cable should be always loose. Do not
keep the cables tight or twisted.
- Use the camera unit within given temperature and e l e c t r i c i t y
limit.
- Use 24V A C o r 1 2 V DC, 1.5A regulated
power supply.
(Supply 24V AC to dual voltage version only)
- Make sure that installation should be done by qualif ie d
service person only.
- Do not disassemble the unit by yourself. When there is problem
with the unit please contact a f te r- sa le service center or the shop
where you bought.
-Stop operating and separate connector from the unit if below
cases happen.
1) When power connector or video connector is broken.
2) When body is broken and dropped.
3) When it is not operating though it is set correctly by the
manual.
If you meet any strange cases please call the shop where
you purchased.
If the product is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.
CONFIGURATION
ACCESSORIES
WALL MOUNT (How to install 1)
1.
2.
3.
4.
Make a hole of 030mm in diameter for passing cable.
Using the mount hole plate, drill four holes on the wall.
Insert the anchors.
Fix the screws.
WALL MOUNT (How to install 2)
1. Adjust horizontal angle.
1) Loosen a bolt to adjust horizontal angle of the camera.
2) Use the WRENCH to tighten a bolt after adjusting the camera.
CEILING MOUNT (How to install 1)
1. Make a hole of 030mm in diameter for passing cable.
2. Using the mount hole plate, drill four holes on the ceiling.
3. Insert 1he anchors.
4. Fix the screws.
CEILING MOUNT (How to install 2)
1. Adjust horizontal angle.
1) Loosen a bolt to adjust horizontal angle of the camera.
2) Use the WRENCH to tighten a bolt after adjusting the camera.
* Twist a bolt counterclockwise once or twice.
* Adjust horizontal angle.
* Use the WRENCH to tighten a bolt after adjusting the
camera.
CEILING MOUNT (How to install 2)
2. Adjust vertical angle
1) Loosen a bolt to adjust vertical angle of the camera,
2) Use the WRENCH to tighten a bolt after adjusting the camera.
*Twist a bolt counterclockwise once or twice.
*Adjust vertical angle.
* Use the WRENCH to tighten a bolt after adjusting the camera.
FUNCTION (SK-P500 AI)
FUNCTION(SK-P500 AI)
• Camera function setting
1. 12V DC Input
Factory Setting
* Display for factory set will last for 5 sec
* How to set OSD menu
- ENTER: Move to next menu
- LEFT: Move to left
- RIGHT: Move to right
2. 24V AC Input
* OSD color
- NTSC: yellowish green
- PAL: sky blue
OSD Menu
1. Day & Night: Day & Night mode
Description
Fixed at Day mode (LED OFF)
Fixed at Night mode (LED ON)
Level (Filter change & LED ON/OFF) selecting mode.
Level 1: 8/18 Lux (D-N / N-D)
Level 2: 5/15 Lux (D-N / N-D)
Level 3: 3/13 Lux (D-N / N-D)
2. Mirror
Normal Image (Default)
Reverse Image
3. Phase
Not controllable at 12V DC Input (Internal Sync.)
Phase controllable at 24 V AC Input (Line-Lock)
Internal Sync mode at 24 V AC Input
4. BLC
Normal Image (Default)
BLC ON (Level selectable)
5. ALC/ELC
ALC MODE (Default)
ELC MODE
6. FLK
FLICKERLESS OFF (Default)
FLICKERLESS ON
-> NTSC: 1/100 sec, PAL: 1/120 sec
7. Chart: Color bar Chart mode
Normal Image (Default)
Color bar chart mode selection:
-> Horizontal: Horizontal Color bar chart
-> Vertical: Vertical Color bar chart
8. AGC
9. Turbo AGC
RESET
• Camera function setting
AGC control mode (Default: middle)
-> Low: 19 (dB) max
-> Middle: 22 (dB) man
-> High: 25 (dB) max
Normal Image
Turbo AGC MODE (Default 2)
At low luminance condition (B/W mode only)
brighten the scene max 2 times
RESET Menu
Push "LEFT & RIGHT" buttons for 3 sec to set the factory
default
DIMENSION (Wall mount)
DIMENSION (Ceiling mount)
SPECIFICATION (SK-P500 AI SERIES)
MODEL NO
SK-P500 AI
Type
Day & Night Color Camera (With IR Illuminator)
Image Sensor
Effective Pixel
Cell size
Horizontal Resolution
SK-P500 XAI
1/3" COLOR SONY SUPER HAD CCD
768 (H) x 494(V) PIXEL (NTSC)
752(H) x 582(V) PIXEL (PAL)
6.35(H) x 7.4(V) (NTSC)
6.5(H) x 6.25(V) (PAL)
Color : 550 TV-LINE,
TV Type
Internal / External (Line-Lock)
Scanning System
Scan. Freq.(VERT.)
Video Output
2:1 Interlace
INT : 15.734 KHz(NTSC), 15.625 KHz(PAL)
L/L: 15.750KHz(NTSC), 15.625 KHZ(PAL)
INT : 59.94Hz (NTSC), 50Hz(PAL)
L/L: 60Hz(NTSC), 50Hz(PAL)
1,0Vp-p(Sync, Negative) Termination 75 Ohms
Gamma Characteristic
Min. Illumination
B/W : 600 TV-LINE
NTSC, PAL
Sync. Type
Scan. Freq. (HOR.)
1/3" COLOR SONY EX-view HAD CCD
0,45 Typ.
0 Lux(40M ~ 50M Range) : LED ON
0.05 Lux(F/1.2) : LED OFF
S/N Ratio
0.01 Lux(F/1.2): LED OFF
45dB over (AGC OFF)
Mirror
On / Off
Flicker less(FLK)
On / Off
IRIS
Auto Iris
Day & Night function
Automatic (Selectable)
Reverse polarity protection
None polarity
External Control
Shutter Speed
(Electronic)
Test illuminant area
Power Supply
Yes
1/60 - 1/100,000 second(NTSC) [at ELC Mode]
1/50 -1/100,000 second(PAL) [at ELC Mode]
Average teal illumination by front view
12V DC/ 21V AC DUAL VOLTAGE
Consumption Current
Operation Temp
Preservation Temp
LED
LENS
Dimension
Weight
Max. 950mA
o
o
-20 C ~ 50 C (with Fan: -20oC ~ 60oC)
-30oC ~ 60oC
30 PCS
Vari focal Auto Iris Lens
79(W)X 77(H) X 172(D) mm
Approx. 1.5kg
* The specification is subject to change without any prior notice to improve the quality.
WARRANTY CARD
* This product will be under warranty for one year after the date of purchase
* The history of after-sale service
Memo
Memo
VEOS LTD
ROSITZA STR. 13, SOFIA, BULGARIA
TEL + 359 2 987 26 65
FAX +0359 2 987 26 84
E-MAIL: [email protected]
URL: www.veos.bg
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement