CATALOGUE HOUSING POWER & CONNECTIVITY MICRO DATA CENTRE STANDARD PRODUCT CATALOGUE MONITORING COOLING Standard PRODUCT CATALOGUE WHAT WILL YOU FIND IN THIS STANDARD PRODUCT CATALOGUE? The core values of modularity, flexibility and energy efficiency are reflected throughout our extensive standard product portfolio. This means you always benefit from the latest technology and you will see it integrated into our standard solutions almost instantly. 1. Housing 2. Cooling 3. Power & Connectivity Minkels offers a wide range of preassembled server and network racks, with flexibility, sustainability and service as the keywords. The server and network racks are widely applicable and modular in structure. Cooling your data centre correctly can reduce your energy costs considerably. Aisle containment is the solution to the challenge that data centres have faced from the very start: how to optimise the cooling and energy efficiency through optimum separation of the warm and cold airflows. Power is an operationally critical component of any server room and any data centre. Even the slightest interruption to the power supply can have a huge impact. Legrand’s Power & Connectivity solutions make it possible to manage the risks of power outages. Minkels and Legrand made this part of their policy for supplying energyefficient solutions for data centres. WANT TO KNOW MORE? The emphasis of this catalogue is on our standard products. If you cannot find the products you are looking for and would like to know more about mass customisation or the customised products we can supply, we will be happy to help you. You can find the contact details on the back side of this brochure. 4. Monitoring 5. Micro data centre Minkels monitoring systems are capable of monitoring the direct surroundings of your racks. The modular and efficient construction of the system makes it easy to check up on a single rack or an entire room. Minkels micro data centre solutions are all about making ordering easy. Simplicity combined with reliability, efficiency and cost-effectiveness. Complete, assembled solutions can be ordered using just a single item number! And all the solutions can of course be extended with a number of options and accessories. Preassembled SERVER AND NETWORK 1. Housing racks Use the flow diagram below to find the right rack! How wide can the rack be? 600 mm 800 mm What colour do you want? Airflow management package: yes or no? RAL 7047 VME206010S RAL 9011 VME206010SB Yes No Minkels offers a wide range of server and network racks, with flexibility, sustainability and service as the keywords. The server and network racks are widely applicable and modular in structure. The Minkels range includes server and network racks that are 600 and 800 mm wide. The 600 mm-wide rack is a compact server rack that can take large loads but has a small footprint. The 800 mm-wide rack is exceptionally well suited for patching, network and server equipment with sufficient space for power and network cabling. You can find further specifications in the table on page 14. Server and network racks, 600 mm wide 41U 25U How deep can the rack be? How deep can the rack be? 1200 mm deep RAL 7047 VMD208010C RAL 7047 VMD208012C RAL 9011 VMD208010CB RAL 9011 VMD208012CB 46U How deep can the rack be? 1000 mm deep 1200 mm deep What colour do you want? 1000 mm deep What colour do you want? Choose the height What colour do you want? 800 mm deep Choose the height 1000 mm deep RAL 7047 VME138080S RAL 7047 VME138010S RAL 9011 VME138080SB RAL 9011 VME138010SB 41U How deep can the rack be? 800 mm deep 1000 mm deep What colour do you want? RAL 7047 VMD228010C RAL 7047 VMD228012C RAL 7047 VME208080S VME208080C RAL 7047 VME208010S VME208010C RAL 7047 VME208012S RAL 9011 VMD228010CB RAL 9011 VMD228012CB RAL 9011 VME208080SB RAL 9011 VME208010SB VME208010CB RAL 9011 VME208012SB You can find further specifications in the table on page 13. Server and network racks, 800 mm wide with airflow management 46U How deep can the rack be? 800 mm deep 1000 mm deep What colour do you want? A distinction is made between standalone (S) and connecting racks (C). Stand-alone racks are delivered with (detachable) side panels. Connecting racks do not have side panels but have baying kits supplied instead. 12 1200 mm deep RAL 7047 VME228080S VME228080C RAL 7047 VME228010S VME228010C RAL 9011 VME228080SB RAL 9011 VME228010SB VME228010CB 1. Housing 1.1 Server and network racks with airflow management pack Server and network racks, 800 mm wide with airflow management pack Minkels can provide server and network racks that are 800 mm wide with an airflow management package. These packages keep the loss of air to a minimum, which improves energy efficiency. VMD208010C RAL 9011 RAL 7047 VMD208010CB Connecting rack RAL 7047 VMD208010C VMD208012C VMD228010C VMD228012C Connecting rack RAL 9011 VMD208010CB VMD208012CB VMD228010CB VMD228012CB 41 41 46 46 Height in mm 2000 2000 2200 2200 Width in mm 800 800 800 800 Depth in mm 1000 1200 1000 1200 Front door 80% perforated 80% perforated 80% perforated 80% perforated Rear door 80% perforated 80% perforated 80% perforated 80% perforated 1500 kg 1500 kg 1500 kg 1500 kg Fix Easy 2-point swivel handle with EK-333 cylinder lock Fix Easy 2-point swivel handle with EK-333 cylinder lock Fix Easy 2-point swivel handle with EK-333 cylinder lock Fix Easy 2-point swivel handle with EK-333 cylinder lock 3 cover plates and 1 cable entry brush set 3 cover plates and 1 cable entry brush set 3 cover plates and 1 cable entry brush set 3 cover plates and 1 cable entry brush set 4 pcs 4 pcs 4 pcs 4 pcs M5 20 cage nuts / M5 20 screws with finishing washer M5 20 cage nuts / M5 20 screws with finishing washer M5 20 cage nuts / M5 20 screws with finishing washer Height in U Max. load (static) Security Roof layout 19-inch profiles M5 20 cage nuts / Delivered separately M5 20 screws with finishing washer 1. Housing 1.2 Server and network racks without airflow management pack Server and network racks, 600 mm wide without airflow management pack Two racks 600 mm-wide are available in the standard product range. Stand-alone rack RAL 7047 VME206010S Stand-alone rack RAL 9011 VME206010SB Height in U VME206010SB VME206010S 2000 Width in mm 600 RAL 9011 RAL 7047 1000 Front door 80% perforated Rear door 80% perforated Max. load (static) RAL 7047 41 Height in mm Depth in mm RAL 9011 1500 kg Fix Easy 2-point swivel handle Security with EK-333 cylinder lock 2 cover plates and Roof layout 1 cable entry brush set 19-inch profiles Delivered separately 4 pcs M5 20 cage nuts / M5 20 screws with finishing washer Server and network racks, 800 mm wide without airflow management pack Server and network racks 800 mm wide without an airflow management pack are are available in a number of standard variations. VME208080S VME208010SB Stand-alone rack RAL 7047 VME138080S VME138010S VME208080S Stand-alone rack RAL 9011 VME138080SB VME138010SB VME208080SB Connecting rack RAL 7047 VME208080C Connecting rack RAL 9011 Height in U Height in mm 25 25 41 1300 1300 2000 Width in mm 800 800 800 Depth in mm 800 1000 800 Front door Clear glass 80% perforated Clear glass Rear door Metal 80% perforated Metal Max. load (static) Security Roof layout 19-inch profiles Delivered separately 1500 kg 1500 kg 1500 kg Fix Easy 2-point swivel handle with EK-333 cylinder lock 2 cover plates and 1 cable entry brush set Fix Easy 2-point swivel handle with EK-333 cylinder lock 3 cover plates and 1 cable entry brush set Fix Easy 2-point swivel handle with EK-333 cylinder lock 2 cover plates and 1 cable entry brush set 4 pcs 4 pcs 4 pcs M5 20 cage nuts / M5 20 screws with finishing washer M5 20 cage nuts / M5 20 screws with finishing washer M5 20 cage nuts / M5 20 screws with finishing washer The 19-inch profiles are fitted as standard at 125 mm from the front and 740 mm apart. For 800 mm deep racks, the rear 19” profiles are at 87.5 mm (the separation between them is in that case 587.5 mm rather than 740 mm). 1. Housing 1.3 Switching & routing racks 2 Switching & routing racks 1 Top view Minkels Switching & Routing racks are ideal for housing powerful switching and routing equipment (e.g. the Cisco 6500 7000 series). The racks combine the best possible cooling performance with capacity for a large amount of network cabling. RAL 9011 MRS208010 RAL 7047 1 2 RAL 7047 (800 mm wide) MRS208010 MRS208012 MRS228010 MRS228012 MRS248010 MRS248012 RAL 9011 (800 mm wide) MRS208010B MRS208012B MRS228010B MRS228012B MRS248010B MRS248012B RAL 7047 (1000 mm wide) MRS201012 RAL 9011 (1000 mm wide) U MRS221012 MRS201012B MRS241012 MRS221012B MRS241012B 41 41 46 46 50 50 Height 2000 2000 2200 2200 2400 2400 Depth 1000 1200 1000 1200 1000 1200 Single or double door 80% perforated Max. load (static) 1500 kg Security Fix Easy 2-point swivel handle with EK-333 cylinder lock Roof layout 1 cable entry brush set Floor layout Sealed with a floor plate and cable entry brushes 19-inch profiles 4 pcs Watch the Switching & Routing rack clip on the Minkels YouTube channel: Youtube.com/c/minkelshq Switching & routing cover plates The empty space between the switching and routing devices must to be covered with Fix Easy front plates, which you can find on page 45. To block off the gaps in the depthwise direction, cover plates are needed that run from front to back. These cover plates are available in heights 2U and 3U. Height 2U Height 3U Slide-in, in mm MRS0102 MRS0112 MRS0122 MRS0103 MRS0113 MRS0123 450 - 550 mm 550 - 650 mm 650 - 850 mm 1. Housing 1.4 Integration rack Integration rack • flexible, heavy-duty 19-inch interior • extremely suited for use as a (high-density) server rack • easily connected to Minkels VariCondition row-based cooling • optimised airflows • Static load: 1500 kg • Dynamic load: 1000 kg MIR208010-01CB Open loop RAL 9011 MIR208010-01CB MIR208010-02CB MIR208012-01CB 41 41 41 41 41 Height in mm 2000 2000 2000 2000 2000 Width in mm 800 800 800 800 800 Depth in mm 1000 1000 1200 1200 1200 Closed loop Height in U MIR208012-02CB MIR208012-03CB Front door 80% perforated 80% perforated 80% perforated Glass door 80% perforated Rear door 80% perforated 80% perforated 80% perforated Glass door 80% perforated 19" - dist. front (mm) 62,5 150 62,5 250 150 Fix Easy 2-point swivel Fix Easy 2-point swivel Fix Easy 2-point swivel Fix Easy 2-point swivel Fix Easy 2-point swivel Security handle with EK-333 handle with EK-333 handle with EK-333 handle with EK-333 handle with EK-333 cylinder lock cylinder lock cylinder lock cylinder lock cylinder lock Roof layout 1 cable entry brush set 1 cable entry brush set 1 cable entry brush set 1 cable entry brush set 1 cable entry brush set 19-inch profiles Open loop 4 pcs 4 pcs 4 pcs MIR228010-01CB MIR228010-02CB MIR228012-01CB 46 46 46 46 46 2200 2200 2200 2200 2200 Closed loop Height in U Height in mm 4 pcs 4 pcs MIR228012-02CB MIR228012-03CB Width in mm 800 800 800 800 800 Depth in mm 1000 1000 1200 1200 1200 Front door 80% perforated 80% perforated 80% perforated Glass door 80% perforated Rear door 80% perforated 80% perforated 80% perforated Glass door 80% perforated 19" - dist. front (mm) 62,5 150 62,5 250 150 Fix Easy 2-point swivel Fix Easy 2-point swivel Fix Easy 2-point swivel Fix Easy 2-point swivel Fix Easy 2-point swivel Security handle with EK-333 handle with EK-333 handle with EK-333 handle with EK-333 handle with EK-333 cylinder lock cylinder lock cylinder lock cylinder lock cylinder lock Roof layout 1 cable entry brush set 1 cable entry brush set 1 cable entry brush set 1 cable entry brush set 1 cable entry brush set 19-inch profiles 4 pcs 4 pcs 4 pcs 4 pcs 4 pcs 1. Housing 1.5 Mechanical accessories Minkels offers a wide variety of accessories wich will make your rack complete, such as for instance various types of shelves, plinths, adjustable feet and more. A list of the accessories which are available in Minkels' standard product range is provided below. If the accessory you are looking for is not among them, don’t hesitate to contact us and we will be happy to help you. You can find the contact details on the back side of this brochure. Shelves • Variable shelves • Variable shelves 100 kg • Cantilever shelves • Minkels Fix Easy shelves • Telescopic shelves Side • Side panels • Partition panel • Plinth, 25 mm, side Other accessories • Earth rails • Assembly brackets • Corner guide rails • Fluorescent lighting sets • Door switch • Baying kit • Number strips • Cage nuts • Decorative screws • Cable entry panel Bottom • Plinth, 25 mm, front/back • Adjustable feet • Castors • Anchoring set • Insert modules Front and back • Expansion set Top • Insert modules THE VIRTUALLY INFINITE POSSIBILITIES OF 1. Housing MASS CUSTOMISATION A standard data centre that appears specially developed for you? That’s mass customisation! Infinite combinations Mass customisation gives you the best of both mass production and tailor-made solutions. We are not talking about complete customisation in this case, but rather about an enormous range of components which can be combined in an almost infinite number of ways. Minkels is one of the few data centre suppliers which are able to offer genuine mass customization. After all, there are quite a lot of nuts and bolts to that type of strategy... If you would like to know more about mass customisation, have a look at our brochure: www.minkels.com/downloads Or contact us – we’ll be pleased to help! You can find the contact details on the back side of this brochure MINKELS STANDARD PRODUCT CATALOGUE 31 Solutions for CABLE MANAGEMENT 1. Housing Structured cabling is important for the reliability and optimum performance of your data centre or server room. Flexibility and accessibility for trouble-shooting or during expansions are essential as well. RELIABILITY Good cable management ensures that the equipment's air intake points are kept as clear as possible. This allows sufficient air to pass through the equipment in order to cool them adequately. Proper cooling avoids equipment failures and results in longer lifespans. OPTIMUM PERFORMANCE Good cable management ensures that cables do not become damaged, do not break and have the right radius of curvature. The wrong radius of curvature reduces the performance of the cable. The radius of curvature must never be less than than what has been recommended by the supplier. Narrow cable tray Wide cable tray FLEXIBILITY AND ACCESSIBILITY When cabling is applied properly, it has a neat and structured appearance. This means that cables can be moved or added easily. Cable bridge 32 1. Housing 1.6 Cable management QUESTIONS ABOUT CABLE MANAGEMENT? If you would like structured cabling in your data centre or server room, if you have questions about the subject or if you cannot find what you are looking for, please contact us and we will be happy to help you. You can find the contact details on the back side of this brochure. MCM0008 MCM0009 SECURITY 1. Housing of racks and aisle containment This emphasis of this catalogue in terms of security is on our standard locking systems. In addition to the standard locking options, Minkels offers a wide range of electronic locking systems. ELECTRONIC LOCKING SYSTEMS These security solutions involve not only cylinder locks on the racks, but also electronic security with pass code systems such as RFID technology for authorising and registering activities, so that a user can see afterwards who was at a certain rack and at what time they were there. Minkels offers a data centre security product line with three different solutions, varying in intelligence and fine-tuned to a broad spectrum of customer specific products. HID-DIRECT AND HID-485 HID-Direct is very well suited for racks which are distributed over a larger area with connectivity via a single network. HID-485 is a smart and cost-effective solution for centralised data rooms, for environments 48 IT infrastructures are vulnerable. Securing access to data and equipment therefore does not end at the walls of a data centre or server room. Security at the rack level is becoming increasingly important for organisations. with a maximum of 32 handles that share a single gateway on the network. BASIC The Basic solution can be integrated into an existing building management or access control system. Basic will open a rack when given a signal by an authorised user via the host system. In addition, the Basic handle can also be coupled as a ‘slave’ to an HID handle. Depending on the access status of the HID handle, the Basic will automatically be opened or closed as well. Advantages of this master/slave combination are simplicity of the management and cabling, and cost savings. More information about the Minkels electronic locking systems can be found in our mass customisation brochure: www.minkels.com/downloads. Or contact us for more information! You can find the contact details on the back side of this brochure. AIRFLOW 1. Housing optimisation Airflow management is the next step in energy efficiency for data centres and server rooms. AP WHITE P ER 04 flow Rack air tion optimisa THE CORRECT AIRFLOW OPTIMISATION ACCESSORIES WILL CREATE AN ENERGY-EFFICIENT SOLUTION Studies by Minkels have shown that using the right airflow optimisation accessories can result in massive reductions in energy consumption. Based on this research, Minkels has developed accessories that provide the concrete answers to specific airflow optimisation requirements. More information on this subject can be found in Minkels’ white paper 04, 'Rack Airflow Optimisation', which is available through the Minkels website: www.minkels.com/whitepapers By Patrick Timmer 1. Housing 1.7 Airflow optimisation Door seals - left or right The rubber door seals can be used on both the left-hand and right-hand sides. The door seal will reduce penetration by dust, counteract incorrect airflows and mute noise. Sealing set This sealing set is intended for sealing the gaps between the side plates of connected racks. Use of this set ensures that no cold air can leak through to the back of the rack. The sealing set is available in 46U and 50U. If you want to use this set for smaller racks, it can be cut to the appropriate size. The sealing set for side plates is made of fire-retardant foam (UL94). Fix Easy front plate The front plate is used for creating an airtight seal of the 19-inch surface. When this front plate was designed, the emphasis was on the ease of installation. The front plate can therefore be fitted in next to no time. A special plastic connector is used for fitting the front plate between the 19-inch profiles. You do not need any tools for the installation! Plastic front plate The plastic front plate is used for creating an airtight seal of the 19-inch surface. The front plates were specifically designed to make them as easy as possible to install and to provide an airtight 19-inch seal. The front plate can be fitted inbetween the 19-inch profiles easily. No fasteners are needed for this. Airtight accessories create energy savings because they prevent air leaks. Switching & routing air inlet duct Minkels has developed an air inlet duct for the 1U and 2U converters. The equipment is installed at the back of the rack and takes its supply of cold air from the front of the rack (corridor). This means that the cables can remain at the back of the rack and the product can still receives enough cold air to keep it cool. Inserts in the side seal plates The plates are fitted in the side sealing plates' 2U x 19 inch cut-aways and can be used for airtight cable entry (you can see some examples in the photos on page 44). The accessories which use foam are are even more airtight. Airtight accessories create energy savings because they prevent air leaks. The airtight front panel can also be used for covering the cut-aways. Cable entry plates between the 19-inch profiles These cable entry plates are suitable for creating a cable entry point. The cable entry plates are fitted between the 19-inch profiles (you can see some examples in the photos on page 44). The types which use foam are particularly airtight. Airtight accessories yield energy savings because air leaks are prevented. 1. Housing 1.8 Security Locking systems Locking systems for the front and back doors (without locking rods). Swivel handle, Fix Easy, conversion set Swivel handle, Fix Easy, with number lock, conversion set locking points Height unit MLK0011 MLK0010 2 points 2 points 25, 37, 41, 46 and 50 25, 37, 41, 46 and 50 Delivery consists of: single items incl. fitting materials Inserts for swivel handles There are two possibilities for filling in the swivel handles: a blank or a cylinder lock. Blank MLK9001 EK-333 cylinder lock MLK9003 Delivery consists of: 1 lock and 2 keys where applicable, incl. fitting materials Cylinder lock for front and side panels The cylinder lock replaces the locking clip and it can be fitted to the rear and side panels. This adds extra security to prevent unauthorised access to the rack. The number of locks depends on the height of the panel. Above 37U, 4 locks are used. If the panel is less than 37U, 2 locks are used. simple cylinder lock Delivery consists of: 1 cylinder and 2 keys MSP0199 WALL 1. Housing enclosures MWE wall enclosure Duopac stand-alone or wall enclosure Tripac wall enclosure The wall enclosure systems are constructed with an emphasis on flexibility and accessibility. MWE Minkels MWEs have eliminated awkward-to-use wall housings once and for all. These attractive and flexible housing elements have been specially developed to allow building-related IT networks to be installed and managed as quickly and efficiently as possible. Unlike traditional wall housings, the MWE is not delivered in assembled form. A single fitter can install the MWE in very little time. DUOPAC The compact Duopac can be fixed to a wall, or it can be placed stand-alone. Its limited dimensions allow for the Duopac to fit easily on or under a desk. The removable side panels make the Duopac extremely accessible. accessible, which is one of the reasons why this smart system is extremely well suited to e.g. housing smaller networks or decentralised network nodes. TRIPAC The Tripac wall enclosure is a carefully thought out, robust housing that offers optimum accessibility. The front door, the middle section and the wall attachment are in fact all hinged. Tripac is a space-saving system which can be used multifunctionally, for instance for housing network components such as cabling, patch panels, hubs and switches. The default sealing standard for Tripac wall enclosures is IP-54. 1. Housing 1.9 Wall enclosures MWE wall enclosure The basic frame consists of a wall element with an integrated strain relief profile, four bars running front to back, two cable entry plates (top and bottom) and a set (2 pcs) of 19-inch profiles. The depth of the 19-inch profiles can be adjusted in steps of 50 mm. The cable holes always fit because the installation engineer can change their size on the spot thanks to the handy bend-away fingers. The 19-inch profiles have a pattern of holes on the side to allow accessories to be fitted. The casing consists of two identical upper and lower panels with ventilation slots at the rear, two identical side panels and a Securit glass door with an EK-333 cylinder lock with a handle. Width: Colour: Finishing: Max. load: 100 kg 600 mm RAL 7047 Powder coating Single items Height in U and mm Depth 425 mm Depth 525 mm Depth 625 mm Built-in depth: 0 - 370 mm Built-in depth: 0 - 470 mm Built-in depth: 0 - 570 mm 6U - 342 mm MWE06425G MWE06525G - 9U - 476 mm - MWE09525G MWE09625G 12U - 609 mm - MWE12525G MWE12625G 15U - 742 mm - MWE15525G MWE15625G - MWE21625G 21U - 1009 mm Pallet Height in U and mm Depth 525 mm Depth 625 mm Built-in depth: 0 - 470 mm Built-in depth: 0 - 570 mm 6U - 342 mm - - 9U - 476 mm MWP09525P (16 pcs) MWP09625P (16pcs) 12U - 609 mm MWP12525G (16 pcs) MWP12625G (16 pcs) 15U - 742 mm MWP15525G (16 pcs) - 21U - 1009 mm - MWP21625 (8 pcs) Delivery consists of: 1 rear plate, 4 depthwise bars, 2 cable entry plates, 2 19-inch profiles, 2 roof and floor plates, 2 side panels, 1 glass door, 1 assembly set, incl. assembly guide COOLING aisle 2. Cooling containment 2013 EUROPEAN RACKS & CABINETS ENTREPRENEURIAL COMPANY OF THE YEAR AWARD Aisle containment systems are the solution to the challenge that data centres have faced from the very start: how to optimise cooling and energy efficiency through optimum separation of the warm and cold airflows. Servers are installed in insulated corridors. Cold air is blown into these corridors (aisles) to cool the servers. The warm air produced by the servers is extracted at the back. In the form of the Next Generation Corridor and the Free Standing Corridor, Minkels offers two modular and flexible aisle containment solutions. These future-proof solutions enable Minkels offer the flexibility and modularity needed to keep a step ahead of the dynamic changes present in a modern-day data centre. Watch the Free Standing Corridor and Drop Away Panels clip on the Minkels YouTube channel: Youtube.com/c/minkelshq In this standard product catalogue, Minkels presents a number of components which can be used to expand your aisle containment. We would also like to refer you to our mass customisation brochure: www.minkels. com/downloads for more information about the aisle containment solutions, which can be assembled in whatever way you desire using the building blocks listed. 2. Cooling 2.1 Passive cooling: Aisle containment - Roof systems Drop away panels RAL 9011 RAL 7047 Drop-away panels provide seamless integration of aisle containment solutions with sprinkler or water mist systems. In the event of a fire in the data centre, the plastic Drop-away panels automatically soften and drop down so that they do not cause an obstruction when the sprinklers are activated. Drop-away panels RAL 7047 RAL 9011 Length 4000 mm MCS221224 MCS221224B 6000 mm MCS221226 MCS221226B 8000 mm MCS221228 MCS221228B 9600 mm MCS221229 MCS221229B Delivery consists of: Roof system, drop away panels and sealing High Transparency Roof Your aisle containment solution can be fitted with a High Transparency Roof. These roof panels provide high translucency / light transmission – up to 83%. The roof panels are mounted on rails, separate from the server racks. The length is the overall length of the aisle containment, i.e. including the start and end panels. High Transparency Roof Length 4000 mm RAL 7047 RAL 9011 MCS221214 MCS221214B 6000 mm MCS221216 MCS221216B 8000 mm MCS221218 MCS221218B 9600 mm MCS221219 MCS221219B Delivery consists of: Roof system, glass panels and sealing RAL 9011 RAL 7047 2. Cooling 2.2 Passive cooling: Aisle containment - Panel systems Panels for the Free Standing You can use steel panels to create an airtight seal for the Free Standing Corridor in spaces where there are no racks. The side panels are connected by three quarter-turn locks. The panels are available in two different widths and colours and you can fill the remaining widths by turning the panel around. The side panels are earthed upon being attached to the Free Standing structure. The panels can be attached to the floor if desired. Panel filler for widths from 325 to 600 mm RAL 9011 Panels RAL 7047 RAL 9011 325 x 2200 mm (w x h) MCS3337 MCS3337B 325 x 2400 mm (w x h) MCS3338 MCS3338B 600 x 2200 mm (w x h) MCS3367 MCS3367B 600 x 2400 mm (w x h) MCS3368 MCS3368B RAL 7047 Delivery consists of: Pre-assembled panel including installation materials for floor assembly You can fill the remaining widths by turning the side panel around. Flexible steel panel for the Free Standing Corridor Use the flexible, steel panels to fill and create an airtight seal in widths ranging from 100 to 400 mm. The flexible panels are earthed upon being attached to the Free Standing structure. Panel filler for widths from 100 to 400 mm RAL 9011 Flexible steel panel RAL 7047 RAL 9011 100-175 x 2200 mm (w x h) MCS3625 MCS3625B 150-275 x 2200 mm (w x h) MCS3626 MCS3626B 250-350 x 2200 mm (w x h) MCS3627 MCS3627B 300-400 x 2200 mm (w x h) MCS3628 MCS3628B 100-175 x 2400 mm (w x h) MCS3645 MCS3645B 150-275 x 2400 mm (w x h) MCS3646 MCS3646B 250-350 x 2400 mm (w x h) MCS3647 MCS3647B 300-400 x 2400 mm (w x h) MCS3648 MCS3648B Delivery consists of: Flexible panels, top, bottom and side profiles including installation materials RAL 7047 2. Cooling 2.2 Passive cooling: Aisle containment - Panel systems Steel Side filler for the Free Standing Corridor The steel side fillers are for filling and sealing small openings between 50 and 110 mm in size. The side fillers are easy to mount using the integrated handle. After installation, simply turn the handle until it is out of the way. Steel Side filler Panel filler for widths from 50 to 110 mm RAL 7047 RAL 9011 RAL 7047 RAL 9011 50-70 x 2200 mm (w x h) MCS3622 MCS3622B 70-90 x 2200 mm (w x h) MCS3623 MCS3623B 90-110 x 2200 mm (w x h) MCS3624 MCS3624B Delivery consists of: Panel with handle, foam sealant and bottom profile Foam for vertical support You can use the foam to seal openings between the racks and the posts or other openings under 50 mm in size. RAL 9011 Foam for vertical support 50 x 2200 mm (w x h) MCS3621 Panel filler for widths from < 50 mm RAL 7047 50 x 2400 mm (w x h) MCS3641 Delivery consists of: Foam sealant Top filler HPL package for the Free Standing Corridor If racks of different heights are being used, you can seal the space between the Free-Standing Corridor structure and the racks with a top filler. The top fillers are made of HPL material and are automatically earthed once they are attached to the Free-Standing Corridor structure. Top filler HPL package RAL 7047 RAL 9011 RAL 9011 Size XL 1100 x 1300 mm (w x h) MCS5161 MCS5161B Size L 1100 x 920 mm (w x h) MCS5162 MCS5162B Size M 900 x 620 mm (w x h) MCS5163 MCS5163B Size S 900 x 320 mm (w x h) MCS5164 MCS5164B Delivery consists of: HPL panel, top, bottom and side profiles, cutting template including installation materials RAL 7047 2. Cooling 2.2 Passive cooling: Aisle containment - Panel systems RAL 9011 RAL 7047 Panel systems for the Next Generation Corridor Use the flexible, steel panel systems to fill openings and create an airtight seal. These panel systems have been specifically designed for the Next Generation Corridor and are automatically earthed once they are attached to the structure. It is very easy to join the panels together. Panel systems RAL 7047 RAL 9011 300 x 2000 x 25 mm (w x h x d) MCS5111 MCS5111B 600 x 2000 x 25 mm (w x h x d) MCS5112 MCS5112B 800 x 2000 x 25 mm (w x h x d) MCS5113 MCS5113B 1200 x 2000 x 25 mm (w x h x d) MCS5114 MCS5114B 300 x 2075 x 25 mm (w x h x d) MCS5121 MCS5121B 600 x 2075 x 25 mm (w x h x d) MCS5122 MCS5122B 800 x 2075 x 25 mm (w x h x d) MCS5123 MCS5123B 1200 x 2075 x 25 mm (w x h x d) MCS5124 MCS5124B 300 x 2200 x 25 mm (w x h x d) MCS5131 MCS5131B 600 x 2200 x 25 mm (w x h x d) MCS5132 MCS5132B 800 x 2200 x 25 mm (w x h x d) MCS5133 MCS5133B 1200 x 2200 x 25 mm (w x h x d) MCS5134 MCS5134B 300 x 2275 x 25 mm (w x h x d) MCS5141 MCS5141B 600 x 2275 x 25 mm (w x h x d) MCS5142 MCS5142B 800 x 2275 x 25 mm (w x h x d) MCS5143 MCS5143B 1200 x 2275 x 25 mm (w x h x d) MCS5144 MCS5144B 300 x 2400 x 25 mm (w x h x d) MCS5151 MCS5151B 600 x 2400 x 25 mm (w x h x d) MCS5152 MCS5152B 800 x 2400 x 25 mm (w x h x d) MCS5153 MCS5153B 1200 x 2400 x 25 mm (w x h x d) MCS5154 MCS5154B Delivery consists of: Flexible side panels, top, bottom and side profiles including installation materials 2. Cooling 2.3 Passive cooling: Aisle containment - Door systems If our standard product range doesn’t fit your requirements, we would like to refer you to our Mass Customisation brochure: www.minkels.com/ downloads where you can find more possibilities and options. You can of course also contact us for more information. You can find the contact details on the back side of this brochure. Self-closing sliding door RAL 9011 RAL 7047 Minkels can offer mechanically self-closing sliding doors which provide an airtight enclosure for your aisle containment system. The self-closing sliding door system is available in two different colours, RAL 7047 and RAL 9011. The doors can be opened manually. After opening, the doors close by themselves. When the doors close, a soft closing mechanism ensures that the doors do not bang against each other unexpectedly. The door panels contain safety glass panels to guarantee the safety of your staff and to allow ambient light into the containment area, as well as making it possible to see into the corridors from outside. RAL 7047 MCS221220 RAL 9011 MCS221220B Automatic sliding door 1200 x 2200 (w x h) Delivery consists of: Sliding door beam, set of doors and assembly materials Extension beam RAL 9011 RAL 7047 If the corridor has racks that are higher than the self-closing sliding door, you can correct the height difference with the extension beam. Example: If there is a rack (2200 mm high) with an elevated plinth at the end of the row, the rack will be 2275 mm high. However, the self-closing sliding door is 2200 mm high. You can correct the difference (2275-2200 = 75 mm) using the extension beam. RAL 7047 MCS6035 RAL 9011 MCS6035B Extension beam for corridor door 75 mm (w) Delivery consists of: Extension beam with cap 2. Cooling 2.4 Passive cooling: Aisle containment - Accessories Minkels can offer energyefficient LED Tubes that improve visibility within data centres, thereby creating a safer and healthier working environment. The highest safety certification level, IEC 62471:2006, guarantees that the eyes of users will be protected. These LED Tubes have been optimised for both the Next Generation and the Free Standing corridors. LED lighting Minkels LED Tubes are extremely easy to install. The suspension points are easy to position, allowing LED lighting to be fitted in a corridor in very little time. Once assembled, the Minkels LED Tube is highly flexible. The rotation capability in the tubes allows the lighting to be targeted specifically at particular pieces of equipment. The high lighting intensity and the energy efficiency of Minkels LED Tubes are particularly effective in the aisles of Free Standing or Next Generation corridors. Particularly when black racks are used, these LED Tubes provide improved visibility. Minkels LED Tubes can be easily extended using extension cords that are hidden away behind small covers so that they appear as a single whole. Each LED Tube can be fitted with a motion sensor so that the lights turn off if no motion is detected for a period of time. This functionality again underlines the energy efficiency of this lighting solution for a data centre. Description LED light 120 cm wide MCS4011 LED light 120 cm wide with PIR sensor MCS4012 Start and end panel kit for Next Generation Corridor and Free-Standing Corridor for LED 1200 mm - RAL 7047 MCS4013 Start and end panel kit for Next Generation Corridor and Free-Standing Corridor for LED 1200 mm - RAL 9011 MCS4013B Start and end panel kit for Next Generation Corridor and Free-Standing Corridor for LED 1800 mm - RAL 7047 MCS4014 Start and end panel kit for Next Generation Corridor and Free-Standing Corridor for LED 1800 mm - RAL 9011 MCS4014B Power cable, 4 metres, C14 connector MCS4021 Plastic cover + power cable (10 cm), male-female connector MCS4022 2. Cooling 2.5 Active cooling: VariCondition dummy coolers and fillers VariCondition dummy coolers You can use dummy coolers if you want to reserve space for a future 300 mm row-based cooler. The reserved space at the top, front and back side will already have an airtight seal thanks to the dummy cooler. The dummy cooler you select depends on the cooling method you choose: closed loop, open loop or hybrid loop. Both the dummy and the actual row-based cooler are 2000 mm high. If a different height is required, you can fill the space with the VariCondition dummy materials listed below. VariCondition Dummy cooler Dummy cooler RAL 7047 RAL 9011 Open loop - 300 mm wide MCS7021 MCS7021B Hybrid loop - 300 mm wide MCS7022 MCS7022B Closed loop - 300 mm wide MCS7023 MCS7023B Delivery consists of: Dummy frame, front and back panel including installation materials VariCondition filler for top of unit Closed loop In a closed loop solution, all airflow from the cooler is routed directly into the adjacent 19 inch racks. The VariCondition fillers are used in combination with the dummy coolers or row-based coolers and are equipped with a cutout for cables. The fillers fill the remaining space and create an airtight seal. VariCondition filler for top of unit RAL 7047 RAL 9011 300 x 1000 x 2075mm (w x d x h) MCS7041 MCS7041B Open loop In an open loop solution, the cold air just outside the racks is routed into the space. 300 x 1000 x 2200mm (w x d x h) MCS7042 MCS7042B 300 x 1000 x 2275mm (w x d x h) MCS7043 MCS7043B 300 x 1100 x 2075mm (w x d x h) MCS7051 MCS7051B 300 x 1100 x 2200mm (w x d x h) MCS7052 MCS7052B Hybrid cold loop This solution is a combination of a closed loop and an open loop solution. The hot air is extracted from the cabinet, just like with a closed loop solution, thus directly from the back side of the rack. This hot air is then cooled in the cooler and transported to the front side of the racks in the same manner as with an open loop solution. It is also possible to completely reverse the airflows (hybrid hot loop solution). 300 x 1100 x 2275mm (w x d x h) MCS7053 MCS7053B 300 x 1200 x 2075mm (w x d x h) MCS7061 MCS7061B 300 x 1200 x 2200mm (w x d x h) MCS7062 MCS7062B 300 x 1200 x 2275mm (w x d x h) MCS7063 MCS7063B Delivery consists of: Filler including installation materials VariCondition H2O-324 bottom filler If you wish to connect your row-based cooler to a Varicon-M rack with an elevated plinth, you can use the below fillers to fill the bottom of the unit. VariCondition H2O-324 bottom filler RAL 7047 RAL 9011 1100/1200 x 75 mm (d x h) MCS7267 MCS7267B Delivery consists of: Filler, plinth and earthing cables POWER & CONNECTIVITY 3. Power & Connectivity Power is an operationally critical component of any server room and any data centre. Even the slightest interruption to the power supply can have a huge impact. Minkels Power & Connectivity solutions make it possible to manage the risks of power outages. Minkels has made this part of the policy for supplying energy-efficient solutions for data centres. Together with Legrand and the Minkels sister company Raritan, we can provide basic and intelligent PDUs that not only meet your requirements today but will fulfil your needs tomorrow. 2 3 1 4 1 RAPID ASSEMBLY 2 CABLE GUIDE 3 AMMETER NO TOOLS NEEDED FOR ASSEMBLY OPTIMISATION OF SPACE CHANGING THE POSITION Can be fitted onto the 19-inch profiles quickly and without tools. No screws or nuts are needed. Cables are kept firmly in place by a cable guide. The ammeter can be rotated 90 degrees to make sure it is easy to read, irrespective of the orientation in which it is assembled (horizontal or vertical). 3. Power & Connectivity 3.1 Basic PDU 1U basic PDU The ease with which the innovative 19-inch Basic PDUs can be installed is a major benefit. If you fit the PDU horizontally, you do not need any tools or fasteners for assembly. The PDUs can however also be mounted vertically in the rack; for vertical assembly you do need to fasten it in place. The PDUs with C13 and C19 outlets have a locking system so that they cannot be removed accidentally. SCHUKO/UTE plugs Outlets Assembly Power Supply Technical details 646806 646840 646841 646820 646821 LPS0004 LPS1004 SCHUKO (6) UTE (6) SCHUKO (6) UTE (9) SCHUKO (9) SCHUKO (14) UTE (14) 19-inch 19-inch 19-inch 19-inch 19-inch Vertical Vertical 1 Phase 16A 1 Phase 16A 1 Phase 16A - Ammeter Ammeter 1 Phase 16A Current indicator light 1 Phase 16A Current indicator light 1 Phase 16A Current indicator light 1 Phase 16A Current indicator light Branding BS1363 plug Outlets Assembly Power Supply Technical details 646813 BS1363 (8) 19-inch Description Outlets C13 (12) Assembly 19-inch 1 Phase 16A - Technical details Branding Output blocking 646815 Power Supply 1 Phase 13A - IEC 60309 plug 646853 646861 LPS8001 SCHUKO (24) MCB (2), C13 (20) C13 (30) and MCB (2) and C19 (4) and C19 (12) Vertical Vertical Vertical 1 Phase 32A, 1 Phase 32A, 3 Phase 16A MCB 16A (2) MCB 16A (2) - LPS9002 MCB 16A (3), C13 (14) and C19 (12) Vertical 3 Phase 32A, MCB 16A (3x2) - Branding 646890 Schuko/UTE set of 6 pcs with key 646892 BS1363 set of 6 pcs with key 646894 C13 set of 6 pcs with key 646895 C19 set of 6 pcs with key LPS0091 Toolless assembly bracket for 1 vertical PDU Set of 2 pcs LPS0092 Toolless assembly bracket for 2 vertical PDUs Set of 2 pcs LPS0093 Assembly bracket for 1 vertical PDU Set of 2 pcs LPS0094 Assembly bracket for 2 vertical PDUs Set of 2 pcs Raritan PDU Raritan PDU Legrand PDU Legrand PDU Branding Assembly bracket Suitable for 4 ASSEMBLY BRACKETS HORIZONTAL OR VERTICAL Designed for horizontal assembly without tools. The 1U PDUs can also be fitted vertically, simply by rotating the assembly brackets. When fitted vertically, a bolt and screw are needed, however, to fit the PDU firmly upright. 3. Power & Connectivity 3.2 Intelligent PDU The Raritan PXE series is an intelligent rack PDU that allows the user to read off the power consumption at the PDU and fuse level, both locally and remotely. You can choose from a wide spectrum of models. The optional plug-and-play air humidity and temperature sensors also monitor the server cabinet environment closely and the user is warned when freely definable threshold values are exceeded, which avoids downtime. The rack PDUs can also be delivered as a fully integrated, preassembled solution in combination with other Minkels data centre and server room solutions. Power strip, IEC, single phase, up to 16A Intelligent 230V 16A rack PDU for measuring current (amps), voltage, power (kVA, kW), power factor (Pf), and consumption (kWh) at the PDU level. CEE (IEC 60309) plug PXE-1190R PXE-1488 Outlets IEC C13 (8) IEC C13 (20) and IEC C19 (4) 19 inch, 1U horizontal 230-240VAC - Ethernet, RS485 serial, USB-B, Environmental Rack Sensor Port 0U vertical 230-240VAC - Ethernet, RS485 serial, USB-B, Environmental Rack Sensor Port Assembly Technical details Power strip, single phase, 230-240VAC, up to 32A Intelligent 230V 32A rack PDU for measuring current (amps), voltage, power (kVA, kW), power factor (Pf), and consumption (kWh) at the PDU level. CEE (IEC 60309) plug Outlets Assembly Technical details PXE-1392 16A MCBs (2) and IEC C13 (16) 0U vertical PXE-1493 16A MCBs (2), IEC C13 (20) and IEC C19 (4) 0U vertical 7.4 – 7.7 kVA, Ethernet, RS-485 serial, USB-B, Environmental Rack Sensor Port PXE-1847 16A MCBs (2), IEC C13 (36) and IEC C19 (6) 0U vertical MONITORING 4. Monitoring Environmental Monitoring System Minkels monitoring systems are capable of monitoring the direct surroundings of your racks. The modular and efficient construction of the system makes it easy to check up on a single rack or an entire room. The systems can of course be integrated seamlessly and managed using your existing network management software. A variety of products are available. The various versions feature different numbers of ports. We make a distinction here between intelligent ports and the so-called ‘dry contact’ ports. The intelligent ports are used e.g. for measuring temperature, humidity and air flows. The dry contact ports, on the other hand, are simple on/off switches where e.g. alerts can be read out from CRAC or UPS systems, or which can be used for door contacts. Alerts In the event of an emergency, the relevant people can be alerted in a variety of ways: by e-mail, text messaging, a web interface and SNMP. The monitoring system therefore allows you to always rest assured of the conditions in your computer and the control rooms. 68 4. Monitoring 4.1 Environmental monitoring system Controllers MRM0011L - back Various controllers are available, depending on the number of measuring points and the types of sensors desired. In addition, the Pro version offers an even higher degree of management, providing you with more control of your environment. MRM0011L - front MRM0020LS - back Controller Controller Controller Controller Controller MRM0001 MRM0003 MRM0010 MRM0020 MRM0030 2 4 8 8 8 available via sensor port adapter (MRM0132) available via sensor port adapter (MRM0132) available via sensor port adapter (MRM0132) 20 60 Camera ports 0 0 0 0 0 Extension ports 0 0 0 0 0 Sensor ports Dry contact ports Delivery consists of: incl. assembly materials. Delivery: in consultation Pro controller Pro controller Pro controller Pro controller MRM0010LS MRM0011L MRM0020LS MRM0030LS 8 8 8 8 available via sensor port adapter (MRM0132) available via sensor port adapter (MRM0132) and/or 8-port dry contact sensor (MRM0124) 20 60 Camera ports 0 4 0 0 Extension ports 2 2 2 2 Sensor ports Dry contact ports Delivery consists of: incl. assembly materials. Delivery: in consultation Sensor ports Controller extension Controller extension MRM0040 MRM0041 GPRS modem for text-message alerts (only with the Pro controller) MRM0042 0 8 Dry contact ports 16 available via sensor port adapter (MRM0132) Camera ports 0 0 Camera ports 0 Extension ports 0 0 Extension ports 0 Delivery consists of: incl. assembly materials. Delivery: in consultation Sensor ports Dry contact ports 0 available via sensor port adapter (MRM0132) 4. Monitoring 4.1 Environmental monitoring system Environmental sensors The environmental sensors measure the surroundings of the IT equipment and they are connected to the controllers. Using these sensors allows you to monitor e.g. the temperature and humidity. MRM0101 MRM0102 MRM0118 MRM0122 MRM0117 MRM0109 Description Temperature sensor with fixed cable (1 m) MRM0101 Temperature sensor with fixed cable (2.5 m) MRM0102 Temperature sensor MRM0118 Temperature sensor (daisy chain to max. 8 sensors) – only with a Pro controller MRM0122 Air humidity and temperature sensor MRM0117 Airflow sensor MRM0109 Delivery consists of: incl. assembly materials. Delivery: in consultation Security and safety sensors The influence of cloud computing, tighter standards and new guidelines for data centres mean that there is a growing demand for data centre security and safety solutions. Minkels offers a wide variety of security and safety sensors such as motion detectors, smoke detectors and water leak detectors. MRM0124 MRM0110 MRM0111 MRM0119 MRM0130 MRM0131 MRM0105 MRM0125 MRM0127 MRM0126 MRM0132 Description Dry contact sensor with 8 ports (only with Pro controller) MRM0124 Motion detector MRM0110 Smoke detector MRM0111 Siren and flashing light MRM0119 Universal camera (USB) MRM0130 Dome camera with pan/tilt control (USB) MRM0131 Water leak detector with fixed cable (4.5 m) MRM0105 Water leak detector with fixed cable (30 m) MRM0125 Water leak detection loop (3 m) MRM0127 Water leak detection loop extension (3 m) MRM0126 Dry contact sensor (adapter) MRM0132 Delivery consists of: incl. assembly materials. Delivery: in consultation 4. Monitoring 4.1 Environmental monitoring system SENSORS The plug-and-play sensors are recognised automatically by the system. All the sensors are powered by the unit. No separate power supply is therefore required for the sensors. All sensors are connected using an RJ 45 connector. If a registered sensor is removed, a notification will be issued. Other sensors The environmental sensors measure the surroundings of the IT equipment and they are connected to the VariControl-S controllers. MRM0112 MRM0114 MRM0116 Description AC voltage detector MRM0112 Sensor-controlled relay MRM0114 4-20 mA signal converter MRM0116 Magnetic door switch MRM0128 Delivery consists of: incl. assembly materials. Delivery: in consultation If you have any questions about our monitoring solutions, or if you cannot find the products you are looking for in this catalogue, don't hesitate to contact us! We’ll be happy to advise. You can find the contact details on the back side of this brochure. MICRO DATA CENTRE 5. Micro data centre solutions solutions Minkels micro data centre solutions are all about making ordering easy. Simplicity combined with reliability, efficiency and costeffectiveness. Complete, assembled solutions can be ordered using just a single item number! And all solutions can of course be expanded upon with a number of options and accessories. In all cases, ease of configuration and ordering is the key! MATRIXCUBE One of the Minkels micro data centre solutions is the MatrixCube. Minkels and Legrand have brought power distribution, cooling, housing and mechanical infrastructure together in a single solution. This turns the MatrixCube into a complete and compact server room. The MatrixCube does not depend on the room it is in and can be implemented at almost any location within a business. No radical modifications to the building are needed. Simple and rapid ordering of off-the-shelf, costeffective professional IT infrastructure! Off-the-shelf, cost-effective professional IT infrastructure 5. Micro data centre solutions The MatrixCube Power distribution rack DX cooler Server rack Power distribution rack DX cooler Server rack Rear of MatrixCube A reliable IT environment has become increasingly important. It has grown to become an operationally critical item that helps justify a company’s raison d’être. But by no means all companies are ready to outsource and prefer to keep the IT infrastructure within the walls of their own organisation. That is why Minkels and Legrand have developed the MatrixCube – a preconfigured, turnkey IT infrastructure solution specifically targeting the SME sector, aiming to eliminate all the IT manager’s worries. Interested in how it works? Watch our MatrixCube clip: youtube.com/minkels_hq Server rack Server rack Front of MatrixCube ADVANTAGES • A reliable and cost-effective solution for server rooms • Not building-dependent, making it simple to implement. • Energy-efficient accommodation for your IT infrastructure. • Proven technology. • A turnkey solution, including installation and commissioning. • Customer specific modifications possible. MINKELS STANDARD PRODUCT CATALOGUE 73 5. Micro data centre solutions 5.1 MatrixCube 16A (2.5 kW/server rack) MXC1600** 32A (5 kW/server rack) MXC3200** Power distribution rack 1 Server rack 2 VariCondition-DX cooler 1 Width in mm 2700 Depth in mm 1200 Height in mm 2350 Overall weight in kg ± 770 Colour Certification RAL 9011 CE ** in the item number is replaced by the country code (e.g. NL, CH, BE, FR) MatrixCube basic configuration The basic configurations are classed by IT power per rack, either 2.5 or 5kW per server rack. A basic configuration always consists of: • One power distribution rack containing the power distribution, UPS systems and monitoring. • Two server racks into which the customer’s equipment can be installed. These racks have two intelligent power strips (A and B) for powering the IT equipment. • One VariCondition-DX cooler to handle cooling requirements. • Given how dependent server rooms are, it was decided to add a monitoring system to the standard configuration. This system provides continuous monitoring of temperature, safety, availability and energy consumption and is connected by default to a central system in the cloud. This means that you can always view the status of your IT equipment present in the MatrixCube online. Optionally, a proactive 24/7 notification service can be added to this monitoring system so that the service department will be contacted immediately in the event of an emergency. Power distribution rack Server rack DX Server rack Watch the MatrixCube clip on the Minkels YouTube channel: Youtube.com/c/minkelshq Power distribution UPS systems 5. Micro data centre solutions 5.1 MatrixCube Cable duct Cable duct Power distribution board - 16A/32A Basic airflow optimisation package Plus airflow optimisation package 4x 19-inch profiles UPS-3 (optional) DX UPS-2 UPS-1 Server rack Power distribution rack Expansion modules for the MatrixCube Extra options: • E xtra power distribution rack which provides a redundant power supply and UPS systems. • E xtra server rack so which provides more room for customer equipment. When an extra server rack is ordered, an additional UPS is delivered which can be added to the power distribution rack. • E xtra VariCondition-DX cooler to provide redundancy in the cooling. • E xtra autonomous operation time for the UPS systems. VariCondition-DX cooler Cable tray set for the MatrixCube Cable trays are available to allow you to optimise the way cables are led to the MatrixCube. Expansion modules Cable tray set for the MatrixCube Server rack 16A (+ UPS) MXC1610** Server rack 32A (+ UPS) MXC3210** Power distribution rack 16A (without monitoring) MXC1620** Power distribution rack 32A (without monitoring) MXC3220** VariCondition-DX 11kW MXC1001** VariCondition-DX 22kW MXC1002** VariCondition-DX 11 kW end-of-row MXC1003 VariCondition-DX 22 kW end-of-row MXC1004 Extended UPS set MXC2001 Extended UPS Autonomy - Battery Tray (per UPS) MXC2002 ** in the item number is replaced by the country code (e.g. NL, CH, BE, FR) Suitable for the server rack (expansion module) + top covers (expansion module) MXC3002 Suitable for the power rack (expansion module) + top covers (expansion module) MXC3003 5. Micro data centre solutions 5.2 MiniCube MiniCube basic configuration Due to the effects of the cloud, many companies have a need to reduce the size of their server rooms and to save costs. Do you have fewer and fewer applications physically running on the servers on site at your company? Do you only want to keep your business critical information in house? If so, this is the time to implement an efficient, turn-key data centre. The MiniCube is also the ideal solution if you want to be able to access your data more quickly – low latency – or professionalise your server room. The MiniCube comes with everything a complete data centre has in the most compact form possible: cabinets, power supply, monitoring and cooling. The MiniCube comes completely pre-configured and is fully plug-and-play. Therefore, the MiniCube makes your IT manager’s life much easier! Benefits • Reliable and cost-efficient solution for server rooms • Building-independent, thus easy to implement • Fast delivery times • Use of proven technologies • Turn-key solution MiniCube 2 kW - Basic MIC2000 MiniCube 3,5 kW - Advanced MIC3500A MiniCube 3,5 kW - Advanced, automatic door opener MIC3510A Server rack 1 Top of rack cooler 1 Width in mm 800 Depth in mm 1200 Height in mm 2300 Minimum dimensions conditions to place the MiniCube solution Total weight in kg Colour Certification 2800 x 2800 x 2800 mm (w x d x h) ± 280 RAL 9011 CE / IEC60950 5. Micro data centre solutions 5.2 MiniCube Expansion modules for the MiniCube The basic configuration of the MiniCube can be enhanced with a variety of enhancement modules: • SNMP card for UPS • Additional 19 inch passive PDUs (region-dependent) for other equipment • Additional passive or intelligent PDUs that can be used to create a 'B-feed'. MIC1010 Description IEC 60309 plug Outlets SNMP & Modbus communication card for UPS MIC1020 MIC1030 RED PMS 032 C13 (20) and C19 (4) MCB 16A (2), C13 (20) and C19 (4) Vertical Vertical Assembly Branding Stekker C20 Outlets Assembly Branding MIC1040 MIC1050 MIC1060 MIC1070 SCHUKO (9) UTE (9) BS1363 (7) T23 (10) 19-inch 19-inch 19-inch 19-inch You can download our documentation via: www.minkels.com/downloads DOCUMENTATION MINKELS Legrand Datacenter integrated solutions If you would like to know the possibilities for the data centre market offerred by the Legrand Group as a whole, consult the brochure ‘Legrand Integrated Data Centre Solutions’ DATA CENTRE INTEGRATED SOLUTIONS BUILDING INFRASTRUCTURE THE ANSWER TO SPECIFIC DATA CENTRE REQUIREMENTS A TOTAL SOLUTION FOR BUILDINGRELATED (IT) INFRASTRUCTURE Building Infra This brochure allows you to discover the total solutions which Minkels and Legrand can offer for your buildingrelated IT infrastructure. Standard Product Catalogue You are now reading the standard product catalogue. It provides details on our entire product range: total solutions for data centres and building-related systems. The standard products can be delivered from stock. Data Centre Integrated Solutions This brochure allows you to discover what Minkels and Legrand can mean for data centres specifically. Minkels focuses on the ‘white space’ – the heart of the data centre – and Legrand on the ‘technical space’ with its building-related infrastructure Mass Customisation brochure A mass customised product is made up of preconfigured building blocks. These building blocks ultimately provide a modular and integrated solution which matches your requirements. Minkels Magazine Minkels issues the Minkels Magazine twice a year. The magazine is full of interesting and relevant customer cases, product introductions and the latest market trends.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021