User Guide - Compare Cellular
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR HANDSET
The provided SIM cards are intended for use with your
handset.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,
i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden.
Defects or damage to your Motorola handset that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located in
this user’s guide for complete details.
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: r765/r765IS
Model Number: H06XCN6JS9AN 1W NON-FM,
H05XAN6JS9AN 0.6W FM/IS
Voltage: 7.4 V
Maximum current: 3 A
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Motorola, Inc.
Consumer Advocacy Office
600 North US Highway 45
Libertyville, IL 60048
www.hellomoto.com
Note: Do not ship your phone to the above address. If you need to
return your phone for repairs, replacement, or warranty service,
please contact the Motorola Customer Support Center at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider,
and/or the provider's network settings may limit the feature’s
functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other
product specifications, as well as the information contained in this
user's guide are based upon the latest available information and
are believed to be accurate at the time of printing. Motorola
reserves the right to change or modify any information or
specifications without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other
Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2009.
Manual Number: NNTN7655B
Use and Care
To care for your Motorola handset, please
keep it away from:
extreme heat or cold
For both handset models avoid
temperatures below -10°C/14°F
or above 60°C/140°F.
microwaves
Don’t try to dry your handset in
a microwave oven.
cleaning solutions
To clean your handset, use only
a dry soft cloth. Don’t use
alcohol or other cleaning
solutions.
iv
contents
Use and Care . . . . . . . . . iv
introducing your
handset . . . . . . . . . . . . . . 1
menu map. . . . . . . . . . . . 2
handset basics . . . . . . . . 5
about this guide . . . . . . 5
battery and charger. . . . 6
insert the SIM cards. . 10
antenna installation . . . 11
antenna removal. . . . . . 11
turn it on & off . . . . . . . 11
SIM card security . . . . . 11
display . . . . . . . . . . . . 14
main menu . . . . . . . . . 16
text entry . . . . . . . . . . 16
volume . . . . . . . . . . . . 18
shortcut keys . . . . . . . 19
navigation key. . . . . . . 19
handsfree speaker . . .
transmitters . . . . . . . .
use GPS with map
software . . . . . . . . . . .
feature for the vision
impaired . . . . . . . . . . .
features for the
hearing impaired. . . . .
calls . . . . . . . . . . . . . . . .
group calls,
talkgroups,
sets, and hubs . . . . . .
emergency group calls
alert notification . . . . .
make a phone call. . . .
answer a phone call . .
make a private call . . .
answer a private call . .
send call alerts . . . . . .
19
20
20
22
22
25
25
34
35
41
41
41
42
42
answer a call alert. . . .
store a phone number
or private ID . . . . . . . .
call a stored phone
number or private ID. .
your phone number
and Private ID . . . . . . .
turn off a call alert. . . .
recent calls . . . . . . . . .
redial. . . . . . . . . . . . . .
caller ID . . . . . . . . . . .
call forward. . . . . . . . .
voice names . . . . . . . .
emergency calls . . . . .
international calls . . . .
speed dial . . . . . . . . . .
voicemail. . . . . . . . . . .
selective dynamic
group (SDG) calls . . . .
contents
43
44
44
45
45
45
46
46
47
47
48
49
50
50
51
v
using your handset as
a modem . . . . . . . . . . .
MOSMS messages . . . .
text messages. . . . . . .
manage memory . . . . .
handset features . . . . . .
PTV features . . . . . . . .
one touch PTT . . . . . . .
PT manager . . . . . . . . .
MMS . . . . . . . . . . . . . .
Bluetooth® . . . . . . . . .
use dual SIM cards . . .
select frequency band .
MOTOtalkTM . . . . . . . . . .
channels and codes. . .
talkgroup knob use . . .
enter MOTOtalk. . . . . .
exit MOTOtalk . . . . . . .
set a channel . . . . . . . .
set a code . . . . . . . . . .
vi
contents
55
57
57
61
62
62
70
71
72
86
90
91
92
93
93
93
94
94
94
make and receive a
code call . . . . . . . . . . . 95
set to receive all . . . . . 95
private calls . . . . . . . . . 96
emergency calls . . . . . 98
setup options. . . . . . . . 98
customize your
handset . . . . . . . . . . . . 100
ring tones . . . . . . . . . 100
wallpaper . . . . . . . . . . 101
datebook . . . . . . . . . . 101
hide or show location
information . . . . . . . . 102
other handset features 104
advanced calling . . . . 104
contacts. . . . . . . . . . . 105
datebook . . . . . . . . . . 105
GPS . . . . . . . . . . . . . . 106
handsfree . . . . . . . . . 107
my info. . . . . . . . . . . . 108
pc applications. . . . . . 109
personalize . . . . . . . . 109
security . . . . . . . . . . .
TTY . . . . . . . . . . . . . .
Safety and General
Information . . . . . . . . .
Service & Repairs . . . .
Specific Absorption
Rate Data . . . . . . . . . . .
Limited Warranty
Motorola
Communications
Products
(International) . . . . . . .
Information From
the World Health
Organization . . . . . . . .
Patent and Trademark
Information . . . . . . . . .
Privacy and Data
Security . . . . . . . . . . . .
Smart Practices
While Driving . . . . . . . .
110
111
116
122
123
125
129
131
132
133
index . . . . . . . . . . . . . . 135
contents
vii
viii
contents
introducing your handset
Channel/Talkgroup Knob
Volume Knob
Emergency Button
High Audio Mic
Shortcut 1 Key
PTT Key
Accessories Connector
Left Soft Key
Perform function
in lower left
display.
Shortcut 2 Key
Speaker (not visible)
Low Audio Mic
Menu Key
From home screen,
open main menu.
Speaker Key
Talk Key
Make &
answer calls.
Right Soft Key
Perform function
in lower right
display.
Power/Home/End Key
OK Key
In menus & lists,
press to select
highlighted option.
Press the Navigation Key
up, down, left, or right to
highlight a menu feature
introducing your handset
1
menu map
main menu
1
Net
L
P
Java Apps
• [Buy More]
• Location Assist
• Java System
Settings
• (see next page)
VoiceRecord
• [New VoiceRec]
Contacts
• [New Contact]
• [New SDG List]
Messages
• [Create Mesg]
• Voice Mail
• Inbox
• Drafts
• Sent Items
• Net Alert
• SMS
Call Forward
D
l
Datebook
Memo
u
0
A
E
2
menu map
M
B
K
Call Timers
• Last Call
• Phone Reset
• Phone Lifetime
• Prvt/Grp Reset
• Prvt/Grp Life
• Circuit Reset
• Circuit Lifetime
• Kbytes Reset
Recent Calls
J
o
My Info
• My Name
• Line 1
• Line 2
• Private ID
• Group ID
• Carrier IP
• IP1 Address
• IP2 Address
• Circuit Data
Profiles
Shortcuts
• [New Shortcurt]
• 1)Shortcuts
• 2)Cntcs[New Contact]
• 3)Recent Calls
• 4)Contacts
• 5)Datebook
• 6)Messages
• 7)VoiceRecord
• 8)Net
• 9)Call Forward
p
Call Alert
c
t
P
GPS
• Position
• Privacy
• Interface
Ring Tones
• [Buy More]
• Vibrate All
• Ringer 1-12
• Vibrate
• Silent
MOTOtalk
• Go To MOTOTalk
• Setup
• Help
main menu (cont.)
O
L
N
My Pictures
Quick PTT
• PTT: Contacts
PT Manager
• Quick PTT
• Send Message
• Send Picture
• Send Event
• Send My Info
• Send Contact
• Configure
'
C
Location Assist
• Send Alert
• AlertReceptionListener
• Configuration
Bluetooth
• Hands Free
• Link to Devices
• Device History
• Setup
• Find Me
This is the standard Main Menu layout.
Your handset’s menu may be a little
different.
menu map
3
settings menu
Display/Info
• Wallpaper
• Text Size
• Theme
• Home Icons
• Backlight
• Clock
• Menu View
• Large Dialing
• Contrast
• Status Light
• Language
Phone Calls
• Set Line
• Any Key Ans
• Auto Redial
• Call Waiting
• Auto Ans
• Minute Beep
• Call Duration
• TTY
• Hearing Aid (supported on r765IS)
• Notifications
• DTMF Dialing
• Prepend
4
menu map
2-Way Radio
• Scan
• Tkgrp Silent
• Tkgrp Area
• One Touch PTT
• Alert Type
• PTT Quick Notes
• On/Off PTT
• Knob Position
• Store Rcvd Info
Personalize
• Menu Options
• Up Key
• Down Key
• Left Key
• Right Key
• Center Key
• Left Sftkey
• Right Sftkey
• Power Up
Volume
• Line 1
• Line 2
• Messages
• Keypad
• Java Earpiece
• Java Spkr
• Data
Security
• Phone Lock
• Keypad Lock
• SIM PIN
• GPS PIN
• Change Passwds
Advanced
• Alert Timeout
• Headset/Spkr
• Connectivity
• Reset Defaults
• Return to Home
• Dual SIM
• Band Selection
• Transmitters
• Phone Only
• Baud Rate
These may be different depending on the
service provider.
handset basics
Caution: Before using the handset for the
first time, read the Important Safety and Legal
information included in the gray-edged pages
at the back of this guide.
about this guide
This guide shows how to locate a menu
feature as follows:
Find it: M > u > Phone Calls
This means that, from the home screen:
1 Press the menu key M.
4 Press the navigation key S down to
scroll to Phone Calls, and press the center
key r to select it.
symbols
This means a feature is network or
subscription dependent and may
not be available in all areas, or might
not be offered by your service
provider. Contact customer service
for more information.
This means a feature requires an
optional accessory.
2 Press - under More.
3 Select u menu.
handset basics
5
battery and charger
• Battery usage by children should be
supervised.
Battery Use & Battery Safety
• Important: Motorola mobile devices
are designed to work best with
qualified batteries. If you see a
message on your display such as Invalid
Battery or Unable to Charge, take the
following steps:
• Motorola recommends you always
use Motorola-branded batteries and
chargers. The warranty does not cover
damage caused by non-Motorola
batteries and/or chargers.
• Use only certified power supply, or UL
(Underwriters Laboratories Inc.) listed
or recognized or specific chargers:
Rapid Unit Charger PMLN5197
Impress Multi-Unit Charger WPLN4187
Caution: Use of an unqualified battery
or charger may present a risk of fire,
explosion, leakage, or other hazard.
Improper battery use, or use of a
damaged battery, may result in a fire,
explosion, or other hazard.
6
handset basics
• Remove the battery and inspect it to
confirm that it bears a Motorola
“Original Equipment” hologram;
• If there is no hologram, the battery
is not a qualified battery;
• If there is a hologram, replace the
battery and retry;
• If the message remains, contact a
Motorola Authorized Service Center.
• New batteries or batteries stored for a
long time may take more time to
charge.
• Charging precautions: When charging
your battery, keep it near room
temperature. Never expose batteries to
temperatures below 0°C (32°F) or
above 45°C (113°F) when charging.
Always take your mobile device with
you when you leave your vehicle.
• When storing your battery, keep it in a
cool, dry place.
• It is normal over time for battery life to
decrease, and for the battery to exhibit
shorter runtime between charges or
require more frequent or longer
charging times.
• Avoid damage to battery and mobile
device. Do not disassemble, open,
crush, bend, deform, puncture, shred,
or submerge the battery or mobile
device. Avoid dropping the battery or
mobile device, especially on a hard
surface. If your battery or mobile
device has been subjected to such
damage, take it to a Motorola
Authorized Service Center before
using. Do not attempt to dry it with an
appliance or heat source, such as a hair
dryer or microwave oven.
• Use care when handling a charged
battery: Particularly when placing it
inside a pocket, purse, or other
container with metal objects. Contact
with metal objects (e.g., jewelry, keys,
beaded chains) could complete an
electrical circuit (short circuit), causing
the battery to become very hot, which
could cause damage or injury.
Promptly dispose of used batteries in
accordance with local regulations.
Contact your local recycling center for
proper battery disposal.
Warning: Never dispose of batteries in a fire
because they may explode.
handset basics
7
battery installation
1 Place the battery on the back of the
handset as shown.
2 Slide the battery towards the top of the
handset until it snaps into place.
8
handset basics
battery removal
battery charging
1 Release the battery latch by pulling it
upwards as shown.
New batteries are not fully charged.
2 Slide the battery towards the bottom of
the handset.
2 Plug the other end of the charger into the
appropriate electrical outlet.
1 Insert your handset into the charger.
For battery charging, see the user guide that
accompanies the Single-Unit Charger or the
Multi-Unit Charger.
The battery level indicator at the upper right of
the screen shows the battery level. At least
one segment of the indicator must be visible
to ensure full handset functionality while
charging.
Tip: Motorola batteries have circuitry that
protects the battery from damage from
overcharging.
handset basics
9
insert the SIM cards
This handset has two SIM card slots. At least
one SIM card must be inserted to connect to
a network for services. Only one SIM card can
be selected for use at any time (see page 90).
Warning: To avoid loss or damage, do not
remove your SIM card from your handset
unless absolutely necessary.
1 Turn off your handset and remove your
battery before you install or remove a SIM
card.
2 Open the SIM card holder.
3 Carefully slide the SIM card into your
handset (with its contacts facing the
printed circuit board), until it lies flat in the
SIM card holder.
4 Close the SIM card holder once you
inserted or removed the SIM card.
10
handset basics
antenna installation
turn it on & off
Note: Attach the handset antenna before
using your handset.
To turn on your handset, press and
hold { for a few seconds or until the
display turns on. If prompted, enter
your four-digit unlock code.
1 Turn the handset off.
2 Insert the bottom of the antenna into the
screw-in base on the top of the handset.
3 Turn clockwise until it will no longer turn.
antenna removal
1 Turn the handset off.
2 Grip the antenna firmly and turn it counterclockwise until it is loose.
3 Remove the antenna from the antenna
socket.
To turn off your handset, press and
hold { for two seconds.
Note: If keypad lock is engaged, you must
unlock the keypad prior to turning off the
handset.
SIM card security
Note: Except for making emergency phone
calls, your handset will not function without
the SIM card.
To prevent unauthorized use of your handset,
your SIM card is protected by a PIN that you
enter each time the handset is powered on.
handset basics
11
You can change the PIN or turn off the
requirement that it be entered.
enter the PIN
You may be required to enter a SIM PIN when
you first use your handset.
When you receive your handset, the SIM PIN
is 0000. Change your PIN to prevent
fraudulent use of the SIM card (see “Change
the PIN” below).
Important: If you enter your PIN
incorrectly 3 times, your SIM card is
blocked. To unblock your SIM card, you
must contact your service provider. See
“unblock the PIN” on page 13.
1 When the Enter SIM PIN Code screen
appears, enter your SIM PIN. An asterisk
appears for each character entered.
2 Press - under Ok.
12
handset basics
Change the PIN
1 From the main menu, select u > Security >
Change Password > SIM PIN.
2 At the Enter Old SIM PIN Code screen, enter the
current SIM PIN.
3 Press - under Ok.
4 At the Enter New SIM PIN Code screen, enter
the new 4 to 8-digit SIM PIN.
5 Press - under Ok.
6 At the Re-enter New SIM PIN Code screen,
re-enter the new SIM PIN to confirm.
7 Press - under Ok.
turn the PIN requirement
On and Off
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you
turn on your phone.
Note: If a SIM PIN is required, your phone will
not function until the SIM PIN is entered,
except for making emergency phone calls.
When the PIN requirement is off, your
handset can be used without entering a PIN.
Important: When the SIM PIN
requirement is off, the personal data on
your SIM card is not protected. Anyone
can use your phone and access your
personal data.
1 From the main menu, select u > Security >
SIM PIN.
2 Select On or Off.
3 Enter the current SIM PIN.
4 Press - under Ok.
unblock the PIN
If you enter your PIN incorrectly 3 times, your
SIM card is blocked. To unblock your SIM
card, you must contact your service provider
to get a PIN Unblock Code (PUK).
Important: If you unsuccessfully enter
the PUK code 10 times, your SIM card is
permanently blocked and must be
replaced. If this happens, all data is lost.
You will get a message to contact your
service provider. Except for making
emergency phone calls, your handset
will not function with a blocked SIM
card.
To unblock the PIN:
1 Press * # M 1.
2 At your service provider representative’s
request, provide the information needed
to give you a PUK code.
3 Select Unblock PIN.
4 Enter the PUK code.
5 Enter a new 4 to 8-digit SIM PIN.
handset basics
13
6 Re-enter your SIM PIN.
Note: Your home screen may look different.
7 If you entered the codes properly, SIM
Unlocked appears on the display.
display
The home screen shows when you turn on
the handset. To dial a number from the home
screen, press number keys and } .
Motorola
10:05 am 10/23
Soft key labels show the current soft key
functions. For soft key locations, see page 1.
14
handset basics
status indicators
Status indicators are shown at the top of the
home screen:
Motorola
10:05 am 10/23
1 Signal Strength Indicator: Vertical bars
show the strength of the network
connection. You can’t make or receive
calls when 1,0, or No Service shows.
2 Active Phone Line: 1 indicates phone line
1 is ready to make calls; 2 indicates phone
line 2 is ready to make calls.
3 Speaker On/Off: Sounds associated with
Private calls and group calls can be set to
come through the earpiece rather than
through the speaker.
4 Ringer Vibe/Off: Your handset is set to
not ring.
5 Message Indicator: Shows when
you receive a text message.
6 Packet Data: Your handset is ready to
transfer packet data or is transferring
packet data when it shows a blinking
arrow.
7 Battery Charge Indicator: A fuller battery
indicates a greater charge. Recharge the
battery when your handset shows Low
Battery.
handset basics
15
main menu
All your handset’s features can be accessed
through the main menu. You can set the main
menu to appear as List View or Icon View.
Find it: M > u > Display/Info > Menu View
text entry
Some features let you enter text.
Your handset provides convenient ways to
enter words, letters, punctuation, and
numbers whenever you are prompted to
enter text (for example, when adding a
Contacts entry or when using Text
Messaging).
change the character input mode
1 When you see a screen where you can
enter text, press M to change the
character input mode.
16
handset basics
2 Select one of the following options:
entry method
Alpha
Press a key several times for
different characters.
Word
Enter words using a predictive
text entering system that lets
you enter a word with fewer key
presses.
Symbols
Enter symbols.
Numeric
Enter numbers by pressing the
numbers on the keypad.
Languages Select the language in which you
want to write the message.
Tip: To change letter capitalization when
entering text, press and hold # and select
the letter.
word method
The Word English text input method lets you
enter text into your handset by pressing keys
just once per letter.
The Word English text input method
combines the groups of letters found on each
handset key with a fast-access dictionary of
words, and recognizes what you want to text
as you type. It first offers the most commonlyused word for the key sequence you enter
and lets you access other choices with one or
more presses of the 0 key.
enter a word using “word” method
character input
1 Select the Word character input method.
2 Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Bill, press 2 4 5 5).
If you make a mistake, press - under
Delete or * to erase a single character.
Press and hold - under Delete or * to
delete an entire entry.
3 To accept a word and insert a space,
press #.
To accept a word completion (such as
Billion when you entered Bill), press S
right.
If you get a word you don’t want, you can
press the 0 key to see more word
choices and pick the one you want.
alpha method
To enter characters by tapping the keypad:
1 Select the Alpha method.
2 Press the corresponding keys repeatedly
until the desired letter appears. Wait a
couple of seconds for the cursor to move,
or move it by pressing S right. (For
example, to enter the word Bill, press 2
handset basics
17
twice, 4 three times, 5 three times,
and 5 three times again.
If you make a mistake, press - under
Delete to erase a single character. Press and
hold - under Delete to erase an entire
entry.
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
space after two seconds or when you enter a
character on a different key.
Characters scroll in the following order:
characters
1
.?!,@&:;“-()‘¿ ¡%£$¥
2
ABC2ÁÃÂÀÇ
3
DEF3ÉÊÈ
4
GHI4ÍÌ
5
JKL5
18
handset basics
characters
6
MNñO6ÓÕÔÒ
7
PQRS7ß
8
TUV8ÚÜÛÙ
9
WXYZ9
0
+-0*/\[]=><#§
#
Space
*
Back
volume
To increase the volume, turn the Volume knob
clockwise.To decrease the volume, turn the
Volume knob counter-clockwise.
Turn the Volume knob to set the volume of
the high audio (in conjunction with the output
audio through the side connector) and the
earpiece.
Set Line 1, Line 2, Messages, Keypad, and Data
volume levels via M > u > Volume.
shortcut keys
Shortcuts let you access most menu options
by pressing a number on your keypad (1
through 9) or saying the voice name of the
shortcut.
Find it: M > K
Shortcut 1 and Shortcut 2 keys are preassigned to positions 1 and 2 of the Shortcuts
menu.
For help on creating shortcuts to a screen:
1 Select M > K.
2 Select [New Entry].
3 Press - under More to scroll the help.
4 Press - under Back to exit help.
Create the shortcut and then press Shortcut 1
key or Shortcut 2 key to enter that screen any
time.
navigation key
Press the navigation key S up, down, left, or
right to scroll to items in the display. When
you scroll to highlight the desired item,
press r.
handsfree speaker
You can use your handset’s handsfree speaker
to make calls without holding the handset to
your ear.
During a call, press - under Speaker to turn the
handsfree speaker on.
The handsfree speaker stays on until you
press - under Speaker.
handset basics
19
You can also activate the handsfree speaker
by pressing the Speaker key " .
use GPS with map
software
transmitters
Your handset is enabled with a highly-capable
GPS receiver that sends location information
to a USB port on a PC, laptop, or PDA.
Note: Consult airline staff about the use of
the Transmitters Off feature during flight. Turn
off your handset whenever instructed to do so
by airline staff.
Transmitters Off turns off your handset’s
calling features and wireless activities in
situations where wireless handset use is
prohibited, but you can use the handset’s
other non-calling features when Transmitters
is turned Off.
Find it: M > u > Advanced > Transmitters > Off
Note: No serial port connectivity is provided
by your handset. Applications on the host
device which are expecting to receive the
GPS location information via a serial port must
instead use a Virtual Serial Comm Port.
The data sent to the host device is formatted
as prescribed in the National Marine
Electronics Association 0183 V3.0
(NMEA-0183) standard. As such it supports
the following formats: GGA, GLL, GSA, GSV,
RMC, and VTG.
This handset is not a full NMEA-0183
compliant device supporting electrical RS-232
connectivity as dictated by the NMEA-0183
20
handset basics
standard. Consequently it's unsuitable for
conventional marine NMEA-0183 equipment
use. Its intended use is for normal
“terrestrial” mobile users who want to enable
their USB hosting computing devices such as
a PC, laptop or PDA with the handset's highlycapable GPS functionality.
get connected
1 Remove the protective cover from
the handset's side connector and insert a
cable into the handset's side connector.
2 Insert the other end of the cable into a
vacant USB receptacle of your host
device. A virtual USB Comm Port will be
created on your host device upon
successful enumeration of the handset as
a USB Communications Device Class
device.
3 Ensure no application in your host device
is using the created COMM port. You may
need to ensure that the created virtual
COMM port settings are set as follows:
• Bits per second: 4800
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
4 Start the GPS application on your host
device. Set the GPS application to start
accepting NMEA-0183 formatted data
from the created Virtual COMM port.
5 Set your handset to start sending
NMEA-0183 formatted location
information.
Find it: M > GPS > Interface > NMEA OUT > On
Your handset is now actively sending location
NMEA-0183 formatted GPS data to your USB
host device.
handset basics
21
To stop your handset from sending location
data:
Find it: M > GPS > Interface > NMEA OUT > Off
Note: Each time you power your handset Off,
NMEA OUT is automatically set to Off and
you need to manually restart it using the
menu selections above.
feature for the vision
impaired
high contrast theme
Your handset comes with a standard contrast
theme that provides black and white text with
reverse text highlighting and very large icons
for easy visualization of selection.
Find it: M > u > Display/Info > Theme >
High Contrast
22
handset basics
features for the hearing
impaired
using your phone with a
hearing aid
For best results use the following optimization
procedures and handset setting. They
generally apply as well for users with cochlear
implants.
optimize your handset position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
microphone coupling is obtained. You also
may need to adjust your hearing aid (HA)
volume setting.
Approximate telecoil location is within
6-13 mm of this location.
r765IS
If your HA has a telecoil, activate its switch,
then also rotate the handset as illustrated to
align the telecoils.
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
Off - Shut off
M - Microphone
T - Telecoil
Approximate telecoil location is just
above the battery.
choose your hearing aid setting
Find it: M > Settings > Phone Calls > Hearing Aid.
Note: This feature is available on the r765IS
only.
1 Set this option to Microphone. Microphone
coupling is now optimized.
or
handset basics
23
2 Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound.
or
3 Set this option to Off (factory default). This
is the setting for non HA users.
24
handset basics
calls
group calls,
talkgroups, sets, and
hubs
A Group call is similar to a Private call, but is
made to all members of a Talkgroup at once.
A Talkgroup is a predetermined group of
members of the same fleet (service provider
dependent).
There are 16 knob positions for Talkgroup/
MOTOtalk. You can program 16 different sets
of Talkgroup/MOTOtalk.
(For additional information on MOTOtalk, see
page 92.)
A Talkgroup in a Talkgroup knob set can also
be part of a Hub. You can differentiate them
by their icons:
T
Talkgroup
Talkgroup number
H
Hub
Hub number
You must join a Talkgroup to make or receive
calls on that Talkgroup. You join a Talkgroup by
affiliating with it. On power up the handset
will automatically affiliate to a Talkgroup if the
knob is set to an active Talkgroup. If the knob
is changed to an active Talkgroup, the handset
will automatically affiliate to the new Talkgroup.
A Hub may consist of 1 to 4 Talkgroups
(service provider dependent). One of the four
calls
25
Talkgroups is preset as primary and up to
three other talkgroups as secondary.
assign a knob position to a
Talkgroup or MOTOtalk
If you turn on the Scan feature and your
handset is idle, it will monitor the activity of
the Talkgroups assigned to the Hub. If any of
the Talkgroups within that Hub of up to four
Talkgroups is active, the handset attempts to
join the call.
Note: First create a set as explained on page
29.
You can initiate a call on the primary Talkgroup
within the Hub. You may be able to respond to
any of the secondary Talkgroups within the
Hub (service provider dependent).
2 Choose an option from the following list
and press r:
That is, the handset checks for all four
Talkgroups in every Group call request that it
receives from the system.
If the Group ID in the group call request
matches any of the four Talkgroups the
handset is monitoring, it responds with a
Group call response and attempts to join the
call.
26
calls
Find it: M > u > 2-Way Radio > Knob Position
1 Scroll to the knob position for assignment
and press r.
option
Set as Talkgroup: Assign the knob position to
the Talkgroup name and ID.
Note: If you do not enter a Talkgroup name,
the Talkgroup number will be stored as a
name.
option
Set as MOTOtalk: Assign the knob position to
the MOTOtalk name, code, and channel. A
channel is a number between 1 and 10. A
code is a number between 1 and 15.
enter and exit MOTOtalk
1 In the network screen turn the Talkgroup
knob until it reaches the required
MOTOtalk channel.
Note: Private Only and Receive All codes
are not supported.
2 Wait for timeout. Switching to MOTOtalk Please
Wait displays. After a few seconds, the
MOTOtalk idle screen appears.
Note: If you do not enter a MOTOtalk name,
“MOTOtalk” is displayed.
Note: The MOTOtalk idle screen layout and
functionality differ from those of MOTOtalk
accessed via the main menu.
3 Press - under Done.
change Talkgroup within a set
1 In the network screen turn the Talkgroup
knob until you reach the desired talkgroup.
2 Wait for timeout. The idle network screen
appears.
Note: The set to which the Talkgroup belongs
is called the active set.
3 To exit MOTOtalk, turn the Talkgroup knob
until it reaches the required Talkgroup.
or
In the idle screen press { , and - under
Yes.
4 Wait for timeout. Switching to Network Please
Wait displays. After a few seconds, the
network idle screen appears.
calls
27
view Talkgroup knob
assignments
Find it: M > u > 2-Way Radio > Knob Position
Note: Only the current Active Set Talkgroups
appear.
1 Scroll to the required position.
2 Press r. The display shows the selected
position assignments.
edit Talkgroup knob
assignments
Find it: M > u > 2-Way Radio > Knob Position
Note: Only the current Active Set Talkgroups
appear.
1 Scroll to the required position and press
r. The display shows the selected
position assignments.
2 Press M.
28
calls
3 Select Edit.
4 Choose an option from the following list
and press r:
option
Edit Talkgroup: Edit the Talkgroup name and ID
previously assigned to the knob position.
Set as MOTOtalk: Enter name, code, and
channel assigned to the knob position.
or
option
Set as Talkgroup: Enter the Talkgroup name and
ID assigned to the knob position.
Edit MOTOtalk: Edit the previously assigned
MOTOtalk name, code, and channel.
5 Press - under Done.
delete an entry
Find it: M > u > 2-Way Radio > Knob Position
reorder a knob position
Find it: M > u > 2-Way Radio > Knob Position
1 Scroll to the knob position to delete and
press M.
1 Press - under Reorder.
2 Select Delete Entry.
2 Scroll to the position and press - under
Grab.
3 Press - under Yes.
3 Press the navigation key S up/down to
move the position to the required location.
delete a set
Find it: M > u > 2-Way Radio > Knob Position
4 Press - under Insert to select the new
location.
1 Press M.
5 Press - under Done to exit the reorder
menu.
2 Select Choose Active Set.
3 Press M.
add a set
4 Select Delete Entry.
Find it: M > u > 2-Way Radio > Knob Position
5 Press - under Yes.
1 Scroll to Add Set at the bottom of the list
and press r.
or
Press M and select Add Set.
calls
29
2 Enter the Set name and press r.
3 To assign a knob position to a Talkgroup or
MOTOtalk in the new Set, press - under
Details and continue as explained on page
26.
delete set
Find it: M > u > 2-Way Radio > Knob Position
1 Press M and scroll to Choose Active Set.
2 Scroll to the set you wish to delete.
3 Select Delete Entry.
Note: Chg Set is available only if 2 sets or more
are defined in the handset.
3 Scroll to the required set.
4 Press r.
change set via main menu
Find it: M > u > 2-Way Radio > Knob Position
1 Press M.
2 Press r to Choose Active Set.
3 Scroll to the required set and press r.
4 Press - under Yes.
join a hub
quick set change
1 Turn the Talkgroup knob to reach the
required channel number and Talkgroup
alias.
1 In the network idle screen turn the
Talkgroup knob.
2 Press - under Chg Set.
30
calls
or
Press # and enter the Hub number using
the keypad.
or
1 Scroll to the Hub name in Contacts or
recent calls list.
2 Press - under Join.
Note: If you join a Hub by entering a number
or via the Contacts list, you will join a
Talkgroup that does not match the knob
position. On the idle screen a question mark
“?” will indicate that the selected Talkgroup is
not the one indicated by the current knob
position. The Talkgroup will also be displayed
with the selected Talkgroup number and not
with an alias.
create an alias for a talkgroup
or hub
via Contacts
1 Begin creating a new Contacts entry. See
“store a phone number or private ID” on
page 44.
2 Assign the Hub Contacts type to the
entry.
3 Assign the Talkgroup number as the
number of the Hub.
via the knob position menu
Find it: M > u > 2-Way Radio > Knob Position
1 Press M.
2 Scroll to Edit and press r.
3 Press r to select Edit Talkgroup.
4 Press r to select Name.
5 Change the name and press r.
6 Press - under Done.
view hub details
While you belong to a Hub, you can see which
Talkgroups are in it.
1 From the recent calls list, scroll to the
Hub.
calls
31
2 Press M.
3 Select Details.
Note: A Group call ends automatically if there
is no activity on the call for a few seconds.
Find it: M > Select Details
receive group calls
make group calls
When you receive a Group call, the following
appears on the screen:
1 Turn the Talkgroup knob to reach the
required channel number and Talkgroup
alias.
or
• The name or number of the Talkgroup
in the Hub
Press #. Enter the Hub number using the
keypad.
• The private number of the person
speaking
To answer a Group call:
or
Scroll to the Hub name in Contacts or
recent calls list.
2 Press and hold the PTT button. Begin
talking after your handset emits a chirping
sound.
3 Release the PTT button to listen.
32
• The name of the Hub
calls
• Proceed as if answering a Private call.
Only one person at a time may speak
on a Group call.
You can set your handset to receive Group
calls from all the Talkgroups in a Hub or only
from the primary Talkgroup. See scan below.
set talkgroup scan
or
To set your handset to receive Group calls
from all the Talkgroups in a Hub:
Scroll to Off if you want to hear Group
calls.
Find it: M > u > 2-Way Radio > Scan
1 Press r.
2 Scroll to On.
To set your handset to receive Group calls
only from the primary Talkgroup in a Hub,
scroll to Off.
Note: If Scan is off, all Hubs become Talkgroups and the secondary Talkgroups are no
longer scanned.
turn off group calls
Find it: M > u > 2-Way Radio > Tkgrp Silent
Setting Tkgrp Silent to On also prevents you from
hearing Emergency Group calls. Hub or
Talkgroup alias/ID will not be displayed on the
idle display.
If you join a Hub by entering a number or via
the Contacts list, you will join a Talkgroup that
does not match the knob position. On the idle
screen a question mark “?” will indicate that
the selected Talkgroup is not the one
indicated by the current knob position. The
Talkgroup will also be displayed with the
selected Talkgroup number and not with an
alias.
1 Press r.
2 Scroll to On if you don’t want to hear Group
calls.
calls
33
emergency group
calls
An emergency group call is a Hub call that
takes priority over all other phone activities in
the phone making the call and sounds a
special emergency tone in the phones
receiving the call.
When you make an emergency group call, a
Group call is made using a designated
emergency Hub or the Hub you currently
belong to.
A designated emergency Hub must be
created for you by your service provider and is
stored on your SIM card.
If no designated emergency Hub has been
created for you, emergency group calls you
make are made using the Hub you currently
belong to. If no designated emergency Hub
has been created for you and you have not
34
calls
joined a hub, you cannot make emergency
group calls.
make an emergency group call
Caution: Making an emergency group call
ends all other activity on your handset,
including 911 emergency calls.
1 Press and hold the Emergency button for
3 seconds to start the emergency group
call.
2 You are now in the emergency call for a
few seconds. Talk until the timer stops the
call.
3 Press and hold the PTT button on the side
of your handset to continue talking. Begin
talking after your handset emits a chirping
sound.
4 Release the PTT button to listen.
5 To exit the emergency group call, press
- under Exit.
6 Exit Emergency Group Call? displays. Either press
- under Yes, or press the Emergency
button twice, or wait for timeout of the
emergency group call.
An emergency group call automatically
ends if there is no activity for 30 seconds.
Emergency group calls you make or
receive do not appear in the recent calls
list.
receive an emergency group
call
When receiving an emergency group call,
your phone sounds a special emergency tone,
unless your phone is set to make no sounds.
To answer an emergency group call:
• Proceed as if answering a Private call.
alert notification
In addition to the emergency group call, the
handset uses alert notification to warn of an
emergency situation. You must configure this
feature in your handset as explained below.
You can send the alert notification via the
Emergency button or the main menu Location
Assist feature. You can also receive an alert
notification from another user who is in an
emergency situation.
Depending on the configuration, such an alert
comprises the handset’s phone number, PTT
number, location information, day and time of
the day when the sender originated this alert.
configure an alert notification
configure the contact
The steps below describe how to add and
update Contacts in the list of Contacts. Your
calls
35
handset will use this configuration for sending
an alert notification.
Find it: M > L > ! > Configuration
1 Select Location Assist Contacts.
2 Select the IP and/or phone numbers for
each Contact per list of options below.
option
IP: If you configure an IP address for the
Contact, the recipient receives the alert
notification via a data message, containing
your phone number, PTT number, location
information, day and time of the day when
you originated this alert.
Note: Configure the AlertReceptionListener to run
in order to receive a data message.
36
calls
option
Phone: If you configure a phone number for
the Contact, the recipient’s handset
receives the alert notification via an SMS
containing your phone number, day and
time of the day when you originated this
alert
3 Press - under Save.
Note: If you do not set all the Contacts, a
warning screen will appear at power up.
configure reception of alert notification
This feature allows you to set up your handset
to receive an alert notification as a data
message.
Find it: M > L > ! > AlertReceptionListener
The Alert Reception Listener will start up.
The Alert Reception Listener will display a
warning screen if it starts up and was already
running.
Note: Receiving an alert notification via IP
may fail, if the recipient is in a Private/Phone
call that lasts longer than 1 minute.
option
Ring & Vibrate: Your handset will ring and
vibrate when it receives an alert
notification.
2 Press - under Save.
configure audio for reception of alert
notification
The following steps allow to set your
handset’s audio configuration upon reception
of a notification.
send an alert notification via the
Emergency button
Find it: M > L > ! > Configuration > Notification
2 Make an emergency group call (see page
34).
1 Choose an option from the following list:
option
Ring: Your handset will ring when it receives
an alert notification.
Vibrate: Your handset will vibrate when it
receives an alert notification.
1 Set up your handset for alert notification
(see page 35).
3 SendAlert starting... displays, indicating that an
alert notification is automatically sent
from the handset after the emergency
group call ends.
calls
37
send an alert notification via
main menu Location Assist
receive alert notification via SMS
1 Press }.
Find it: M > Java Apps > ! > SendAlert
2 You are placed in a Phone call with the
SMS sender.
or
Find it: M > ' > SendAlert
Note: If the recipient’s handset is off, your
handset will display a message stating that
your message was not acknowledged.
or
1 Press - under Read.
2 Press - under Reply.
3 Enter your message.
receive an alert notification
4 Press - under Send.
When it receives an alert notification, your
handset sounds a special tone, unless it is set
to make no sounds.
receive an alert notification via data
message
You can call back the sender via Phone call or
PTT.
You can receive the alert notification via SMS
and/or data message depending on the
Contact’s configuration (see page 35).
1 From the data message, press }
or
press - under Call.
38
calls
2 You’re placed in a Phone call with the
sender.
or
1 To answer via PTT, press M > PTT Call.
2 Press PTT key
or
Press - under Call.
3 You’re placed in a PTT call with the
sender.
In case of multiple alert notifications via data
message:
1 From the data message, press - under
Call.
2 Select the required Phone number and
press }
or
press - under Call.
or
1 Press M > PTT Call.
2 Scroll to the required PTT number and
press PTT key
or
Press - under Call.
isolated site operation
Isolated Site Operation lets you continue to
make and receive Group calls on the Hub or
Talkgroup you last used, within a limited
coverage area, even if the site loses network
connectivity.
When you lose network connectivity during a
Phone call, Private call, Group call, or data
transfer, the call or data transfer ends; the
emergency Hub becomes a normal Talkgroup.
But you can make and receive new Group
calls on the Hub you last used.
calls
39
If the One Touch PTT settings on your handset
would prevent you from making Group calls
on the Hub you last used, these setting are
overridden while your handset is in Isolated
Operation.
Caution: You cannot make emergency group
calls in Isolated Site Operation, even if the
Hub you last used is the designated
Emergency Hub. You must have network
connectivity to make emergency group calls.
If the designated emergency Hub is the Hub
you last used when you lost network
connectivity, your handset uses this Hub as
your Talkgroup for the Isolated Site Operation.
If the handset you send the call alert to has
this capability, the text message appears on
that handset when the call alert is received. If
the handset you send the call alert to does not
have this capability, the call alert appears
without the text message.
send a call alert status message
1 Proceed as you would when sending any
call alert.
2 When the Ready to Alert screen appears,
choose the text message you want to
send:
Scroll S left or right to display the
message you want to send.
call alert status messages
or
You can send call alerts that include text
messages up to 10 characters long. These
messages are stored on your SIM card when
your receive your handset. There are 10 you
can choose from.
Press the number on you keypad
associated with the message you want to
send. Press 1 and then 0 to choose
message 10.
40
calls
3
Press the PTT button until Alert Successful
appears on the display.
Note: The recipient must have the same
messages in the same order on her/his SIM
card in order to see the message you sent.
receive a call alert status message
When you receive a call alert that includes a
text message, the text message appears as
the part of the call alert information when you
receive the call alert and in the recent calls
list.
make a phone call
Enter a phone number and press } to make
a call or use a voice command. See “place a
call using voice name” on page 48.
Tip: For best performance avoid touching the
antenna with your fingers during the call.
answer a phone call
When your handset rings and/or vibrates, you
have the following options:
1 If you want to answer the call on speaker
phone, press the Speaker key " . To turn
speaker phone off, press " again.
2 If you want to answer the call using the
handset, press } . To hang up press { .
3 If you are using a Bluetooth headset, you
can press the answer key on your
Bluetooth headset. To hang up press the
same key on your Bluetooth headset.
make a private call
With Private calls service, you use your
handset as a long-range, digital 2-way radio
using one-to-one Private calls or one-to-many
Group calls.
To hang up press { .
calls
41
Your Private ID is the number at which you
receive one-to-one Private calls. To find your
Private ID, see page 45.
Talkgroup numbers are numbers through
which you receive one-to-many Group calls.
to make a Private call
1 Enter the Private ID you want to call.
2 Press and hold the PTT button. Begin
talking after your handset emits a chirping
sound.
3 Release the PTT button to listen.
Note: A Private call ends automatically if there
is no activity on the call for a few seconds.
answer a private call
1 When your handset emits a chirping
sound or vibrates to indicate you are
42
calls
receiving a Private call, wait for the caller
to finish speaking.
2 Press and hold the PTT button and begin
talking after your handset emits a chirping
sound.
3 Release the PTT button to listen.
To end the call press { .
send call alerts
Sending a call alert discretely lets the
recipient know that you want to talk to him or
her on a Private call.
When you send a call alert, the recipient’s
handset displays your name and emits a
series of beeps or vibrations.
The recipient has the following options:
Option
Answer: Begin a Private call with the sender.
Queue: Store the call alert to the call alert
queue.
Clear: Dismiss and delete the call alert.
to send a call alert
1 Enter the Private ID you want to call as
you would when making a Private call.
2 Press - under Alert.
When the message Ready To Alert appears on
the display, press the PTT button until the
message Alert Successful appears.
answer a call alert
When you receive a call alert, you must
answer, queue, or clear it. You cannot receive
Phone calls or Private calls until you do.
to answer a call alert
1 Press the PTT button to start a Private call
with the sender.
or
2 Queue the call alert by pressing - under
Queue.
or
3 Clear the call alert by pressing - under
Clear.
calls
43
store a phone number
or private ID
You can store a phone number or Private ID in
Contacts.
Find it: M > L > [New Contact]
1 Enter a name for the new entry. Each
entry’s name can contain 20 characters.
2 Select a specific Ringer.
3 Select a type for the entry (Mobile, Private,
Work1, Work2, Home, Email, Fax, Pager, Talkgroup,
Hub, SDG, IP or Other). To store a Private ID
choose Private.
4 Enter the number for the entry and press
- under Done.
Tip: Before saving the entry, you can save
more information. You can store an Email
address, IP addresses, and more. You can
choose a special ringer, create Contact entries
44
calls
that are groups of Private IDs called Group IDs
and/or SDG lists.
After you have saved the number, the new
Contacts entry is displayed.
call a stored phone
number or private ID
Shortcut: From the home screen press under Contcs.
or
Find it: M > L
1 Scroll to the Contacts entry.
Tip: By pressing the first letter of the
name of the Contacts you want, you will be
taken to all the Contact names starting
with the letter you pressed.
2 If the Contacts entry contains more than
one number, scroll S left or right until
the type of the number you want to call is
displayed (Mobile, Private, Work1, Work2, Home,
etc.).
3 If you chose a phone number, press } to
call the entry.
Tip: To see your phone number or Private ID
while you’re on a call, press M > My Info.
turn off a call alert
or
Use the Volume knob to turn off a call alert
before answering the call.
If you chose a Private ID, Talkgroup ID, or
SDG List, press and hold the PTT button
to call the number.
recent calls
Tip: If the Contacts entry you scrolled to
contains a Private ID, you can make an instant
Private call to that Private ID by pressing and
holding the PTT button, even if the Private ID
is not the type of number displayed.
The recent calls list contains information
associated with calls you have made and
received and call alerts you have received.
When you send or receive Private calls, the
recent call list contains the following PTV
items with those calls:
your phone number and
Private ID
• Contact information received
Find it: M > J
• short text messages received
• My Info received
• pictures sent or received
calls
45
• Datebook events received
The recent calls list displays up to 20 of the
most recent calls and call alerts.
3 If Save is not one or you options, press
M > Update Contacts. And select the Contact
you want to update.
1 Press M > Recent Calls.
4 Press - under Done to save your changes.
2 Scroll through the list.
store an item to contacts from
recent calls
Phone calls, Private calls, My Info, or Contacts
entries received from other handsets can be
stored to the Contacts list from the Recent
Calls list.
Find it: M > Recent Calls
1 Scroll to or select the item you want to
store.
2 Press M > Save to store the information
as a new entry in the Contacts list.
or
46
calls
redial
To redial your last outgoing call, press and
hold } or push the PTT button if it was a
Private call.
caller ID
Caller ID allows people to identify a caller
before answering the phone by displaying the
number of the incoming call. If you do not
want your number displayed when you make
a call, just follow these easy steps.
To block your phone number from being
displayed for a specific outgoing call:
1 Press * 6 7 .
2 Enter the number you want to call.
3 Press } .
To permanently block your number, call your
customer service provider.
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
Find it: M > Call Forward
1 To forward all calls select All Calls and select
To to enter the phone number you want all
your calls forwarded to.
or
2 You can specify a forwarding number for
each type of missed call by selecting
Detailed and choosing the following options:
If Busy: When your handset is on a call or
transferring data.
If No Answer: When you do not answer on
the first 4 rings.
If Unreachable: When your handset is out of
coverage or powered off.
voice names
You can place calls by speaking commands to
your handset if you have previously assigned
a voice name to your Contacts.
calls
47
assign voice names to contacts
1 Press - under Contcs and select [New
Contact].
2 Assign a name, phone number and select
[Options].
3 Select Voice Name and follow the prompt to
record the voice name.
4 Press - under Back and - under Done.
place a call using voice name
1 Press the Speaker key " until you are
prompted to say the voice name.
The handset will automatically place the call.
Note: If there is no voice name in Contacts
and you press and hold the Speaker key " ,
you will hear a “No voice tags trained”
message.
48
calls
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances, even when your
handset is locked or the SIM card is not
inserted.
Note: Emergency numbers vary by country.
Your handset’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
Your handset supports emergency calling.
Emergency phone calls can be made even
when your SIM card is blocked or not in your
handset.
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
When you make an emergency call, your
handset’s GPS Enabled feature can help
emergency service personnel find you, if you
are in a location where your handset's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your best knowledge
of your location to the emergency response
center when you make an emergency call.
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
You can additionally enable a predefined prefix
to the dialing number by using Prepend dialing.
Find it: M > u > Phone Calls > Prepend
1 Select Prepend and set it to On.
2 Select Number and add the prefix number of
your choice.
Note: Emergency calls cannot be placed
while the keypad is locked.
When the Prepend feature is set to On, the
predefined prefix is inserted to the front of
the number that you are dialing.
Note: If you have not registered on the
network, emergency calls cannot be placed
while your SIM card is in your handset.
Except that the number is led by "*", "00",
"011" or the number contains "+".
international calls
Note: You can also use Prepend temporarily
when the feature is set to Off. For example,
enter the phone number from the home
screen and press M > Add Prepend. The
If your handset service includes international
dialing, press and hold 0 to insert your local
calls
49
temporary prepend will be inserted to the
number you are dialing.
speed dial
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
1 From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
2 Press #.
3 Press } .
voicemail
Note: To receive voice mail messages, you
must first set up a voice mail account with
your service provider.
receiving a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
To call your service provider’s voice mail
system and listen to the message:
• To check voicemail messages:
Press the soft key under Call.
• To dismiss the message notification:
turbo dial
The first nine entries in your Contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
50
calls
Press - under Back.
If the caller leaves a message, this icon y
appears on the display, reminding you that
you have a new message.
selective dynamic
group (SDG) calls
You can use Send via PTT to send SDG
lists to other handsets that have this
capability.
A SDG call is similar to a Private call, but is
made to all members of a SDG list at once
(service provider dependent). A SDG list is a
group of Private IDs that you create using
your handset. A SDG list must contain at least
2 members and can contain up to 20
members.
create SDG lists in contacts
You can create a SDG list for one call only or
store it to Contacts so you can call it any time.
Note: In order to store SDG lists to your
handset, you must use a SDG-capable SIM
card. For more information about SDGcapable SIM cards, contact your service
provider. SDG lists created with your handset
are not readable by an older iDEN SIM-based
handset.
Shortcut: From the home screen press under Contcs.
1 Select [New SDG List].
Tip: You can also create a SDG list by
selecting [New Contact] and assigning the
SDG Contact type. See “store a phone
number or private ID” on page 44.
2 If you want to assign a name to the SDG
list, enter the name.
Note: If you do not assign a name, the
SDG list is named “SDG” followed by the
number of members in the SDG list. For
example, “SDG (8)” for a SDG list with 8
members.
calls
51
3 Add Private IDs. See “Adding Private
Numbers” below.
A checkmark appears next to each selected
item.
4 If you want to create a voice name for the
SDG list, select [Options] > Voice Name. As
directed by the screen prompts, say and
repeat the voice name you want to assign
to the SDG list. Speak clearly into the
microphone.
Tip: To deselect a selected item, highlight it
and press r.
5 Press - under Save.
add private numbers
add members from contacts,
the recent calls list, or memo
1 While creating a SDG list, select [Add
Member] or select [Add Number] and press r.
Tip: To move between Contacts, the
recent calls list, and Memo, scroll S left
or right.
You can add Private IDs to a SDG list by
selecting them from Contacts, the recent
calls list, or memo. You can add all members
in an existing SDG list by selecting the list.
You can also enter Private IDs from the
keypad.
2 Scroll to the members you want from
Contacts, the recent calls list, or Memo,
and press r. A checkmark appears next
to each selected member.
You can select more than one member from
Contacts and the recent calls list.
Tip: To deselect a selected member, highlight
it and press r.
3 Press - under Done.
52
calls
add members manually from
the keypad
1 While creating a SDG list, select [Add
Number].
remove all members from a SDG list
1 From Contacts, scroll to the SDG list you
want to delete the member from.
2 Press - under Edit.
2 Enter the Private number using the
keypad.
3 Press M > Remove All.
remove members or SDG lists
delete a SDG list from Contacts
1 Scroll to the SDG list you want to delete.
remove a member from a SDG list
1 From Contacts, scroll to the SDG list you
want to delete the member from.
2 Press - under Edit.
3 Scroll to the member you want to remove.
4 Press M > Remove Member.
5 Press - under Save.
4 Press - under Yes to confirm.
2 Press M > Delete SDG List.
make SDG Calls
1 From Contacts or the recent calls list,
scroll to or select the SDG list you want.
or
Press and hold " until a prompt appears
telling you to say the voice name. Say the
voice name assigned to the SDG list you
want.
calls
53
or
From the home screen, press the number
on your keypad for the shortcut you
assigned to the SDG list you want.
or
Enter or select a Private ID and add more
Private IDs. “start a SDG call with a
private ID” below.
2 Push the PTT button.
start a SDG call with
a private ID
You can start a SDG call with any Private ID
you want to call.
Note: Choose the first Private ID that you
want in the SDG call:
1 From the home screen, enter the Private
ID.
or
54
calls
From the Contacts list, scroll to an entry
containing the Private ID.
or
From recent calls list, scroll to an entry
containing the Private ID.
2 Press M > Call SDG.
3 Add more Private IDs. See “add private
numbers” on page 52.
If you want to save the SDG list you have
created press M > Store SDG.
or
If you do not want to save the SDG list,
press - under Done.
4 Push the PTT button to make the call.
SDG call Information
While you are in a SDG call, the following
appears on the screen:
• The name of the SDG list
• The name or the Private ID of the
person speaking
• The number of participants in the SDG
call
SDG Call Details
During a SDG call, you can view details about
the other SDG list members, such as their
name or Private ID, and their status on the
call. To view SDG call details, press - under
Details.
In the SDG Call Details view, these icons
appear next to member names or Private IDs:
T The member of the SDG list who is
speaking.
A A member of the SDG list who is active
on the SDG call, but not speaking.
O A member of the SDG list who has
exited the call.
U A member of the SDG list who could not
be reached on the SDG call.
u A member of the SDG list whose status
is unknown.
using your handset
as a modem
You can use your handset as a modem (Packet
Data only) with a laptop, handheld device, or
desktop computer. Circuit Data is not
supported. In order to use your handset as a
modem, you must create either a wired or
wireless connection between your handset
and the other device.
To connect your handset wirelessly, you must
have a Bluetooth adapter for the other device.
calls
55
connect via Bluetooth
Use your handset as a modem via Bluetooth.
The laptop, handheld device, or desktop
computer you want to connect to must have a
Bluetooth adapter installed.
Check that the adapter is properly installed,
and then follow the specific instructions
outlined in the device’s user guide to connect
the device to your handset.
When used as a modem, your handset is
enabled for Data Modem transfer mode, which is
used for small file transfers such as email.
56
calls
MOSMS messages
text messages
If your service provider offers Text Messaging,
your handset sends text messages using
MOSMS and receives text messages from
other handsets that are using MOSMS.
set it up
Before you begin using text messaging, you
may need to set up your signature and
expiration information. You must set up your
service center number.
Shortcut: From the home screen press under Msgs > M > Text Msg Setup.
or
The following options become available:
option
Signature: Enter your signature (up to 11
characters long).
Delivery Report: Set it to On if you wish to
receive a report once the message has
been delivered.
Srvc Cntr No: Enter the phone number of your
service center. If you do not know this
number, contact your service provider.
Expire After: This is the amount of time
messages you send are saved at the
service center if they cannot be delivered.
After this period, they are discarded.
Find it: M > E > M > Text Msg Setup
MOSMS messages
57
option
Cleanup: Set this option to On if you want your
handset to delete sent messages.
If you select Cleanup, select Clean Up After to set
the number of days after which sent
messages are deleted or the number of
messages to be kept.
Quick Notes: Are short, pre-written text
messages that you can create, edit, and
send in your text messages. You can store
up to 20 quick notes. A quick note may be
up to 30 characters long.
Select Quick Notes to create a [New Note] or
press - under Edit to change the prewritten quick notes.
Mem Mtr-Inbox: Select this option to view the
amount of memory available in your text
inbox.
58
MOSMS messages
option
Mem Mtr-Other: Select this option to view the
amount of memory available in your outbox
and draft folders.
Press - under Done to save the information
you entered.
receive a text message
1 To view the message press - under Read.
2 To dismiss the message notification press
- under Back.
Note: If your handset is powered off when
you receive a text message, your handset
notifies you the next time you power it on. If
you are out of your coverage area, your
handset alerts you when you return to your
coverage area.
Tip: While reading a text and numeric
message that contains a phone number, you
can press } to call that number.
create and send text messages
1 From the home screen press - under
Msgs > [Create Message] > [Create Txt Msg].
read from the Message center
or
1 From the home screen press - under
Msgs > Inbox > Text Msg Inbox.
You can also create a text message from
the Inbox, Outbox, or Drafts.
2 Select the message you want to read or
press the number of the message you
want to read. If the message fills more
than one screen, scroll to read it.
Tip: Scrolling through one message lets
you view the next message.
3 To reply to the message, press - under
Reply or to see all other choices, including
forwarding and deleting the message,
calling the sender, or storing the sender’s
number in Contacts, press M.
2 To address the message use the keypad
to enter the phone number of the person
you want to send the message to and
press r or press - under Contcs, or
press M > Recent Calls. Select the number
you want.
3 Select Msg: and enter the text of the
message or to use a quick note press under Browse and scroll to the quick note
you want.
4 Press M > Set Send Method and select Text,
Fax, x400, Paging, Email, ERMES, or Voice.
MOSMS messages
59
5 If you want to send the message, press
- under Send or to delete the message
without sending it, press - under Cancel.
Note: If you want to request confirmation
of delivery press M > Delivery Report > On.
use drafts
When you save a message as a draft, it is
saved in the drafts folder.
Shortcut: From the home screen press under Msgs > Drafts > Text Drafts.
1 Select the draft you want to edit. You also
have the choice to create new text
messages from this menu.
2 To edit the fields you want to change,
follow step 2 through step 5 in “create
and send text messages” above.
60
MOSMS messages
resend text messages
Shortcut: From the home screen press under Msgs > Outbox > Text Outbox.
1 Scroll to the message you want to resend
or press the number of the message you
want to resend.
2 Press M > Resend.
delete sent text messages
Shortcut: From the home screen press under Msgs > Outbox > Text Outbox.
1 Scroll to the message you want to delete.
2 Press - under Delete.
3 Press - under Yes to confirm.
delete all unlocked sent messages
For an explanation on locked and unlocked
messages, see page 79.
Shortcut: From the home screen press under Msgs > Outbox > Text Outbox.
To view the amount of memory available in
your text inbox:
1 Press M > Delete All.
Shortcut: From the home screen press under Msgs > M > Text Msg Setup > Mem Mtr-Inbox.
2 Press - under Yes to confirm.
manage memory
To view the amount of memory available in
your outbox and drafts folder:
Your text inbox, outbox, and drafts folder have
a set amount of memory available for storing
messages.
Shortcut: From the home screen press under Msgs.
The text inbox holds 20 messages. If the text
inbox is full, you cannot receive messages
until you delete some.
2 Press > M > Text Msg Setup > Mem Mtr-Other.
1 Scroll to Inbox, Drafts or Outbox.
The outbox and drafts folder hold 30
messages each. If the outbox and drafts
folder memory is full, you cannot send
messages or save drafts until you delete
some.
MOSMS messages
61
handset features
PTV features
With Push To View features, your handset can
send and receive the following items through
Private calls with other handsets that have
this capability:
• Short text messages1
• Pictures1
• Datebook events
• My Info
• Contact information
You can choose to send messages, pictures,
events, My Info, or Contacts information to the
1. Additional charges may apply.
62
handset features
Private ID you are engaged in a Private call
with, Private IDs on the Recent Calls list, and
Private IDs stored in Contacts.
To exchange messages, pictures, and events,
you must exchange My Info with the
recipient’s handset:
Find it: M > Use PTT Feature > Send My Info
Ask the recipient to return the Private call.
Your handset will then have the recipient’s My
Info.
When you make or receive a Private call, your
handset automatically determines whether
the handset you are engaged in a Private call
with is able to receive each of these items.
Your handset saves this information for as
long as the Private ID is on your Recent Calls list
or is saved in your Contacts. Your handset
updates the saved information each time you
make or receive a call to or from that Private
ID.
You can turn your handset’s ability to send and
receive messages, pictures, or events
information On and Off.
Note: You cannot send PTT feature items
during Talkgroup calls or SDG calls.
send messages
The Push to Send Messages feature
lets you send short text messages through
Private calls.
When you send a message, it appears on the
display of the handset you are engaged in the
Private call with.
begin a message and choose a
recipient
You can begin a message during a Private call,
from the Contacts list, the Recent Calls list, or from
the PT Manager.
begin a message during a Private call
While in a Private call, press M >
Use PTT Feature > Send Message.
Note: The first time you send a message,
Messaging Fees May Apply Continue? appears and you
are prompted to respond. Press - under Yes
to acknowledge the message.
begin a message from the Contacts or
the Recent Calls list
1 From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
2 Press M > Use PTT Feature > Send Message.
handset features
63
begin a message from the PT Manager
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
changes the Quick Note for this message only
and will not change the Quick Note on the list.
First set up the recipient’s info in your handset
as described in steps 1-3 in “begin a message
and choose a recipient” on page 63.
send a completed message
Find it: M > PT Manager > Send Message
After you have completed your message,
press the PTT button to send it.
Then select A Contact or A Recent Call to see a list
of entries from the Contacts or the Recent Calls list
that can receive messages.
receive messages
create messages
To view the message press - under Read.
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
send. Your message may be up to 400
characters long.
To dismiss the message press - under
Dismiss.
You can choose from a list of ready-made
words or short phrases called Quick Notes.
2 Press - under Reply.
64
handset features
When you receive a message, a message
notification appears on the display.
reply to a message
1 View the message.
3 Create the message and press the PTT
button to send it.
send pictures
You can send pictures stored in the My
Pictures through Private calls. The picture you
send appears on the Private call recipient’s
display.
If the recipient accepts the picture, their
handset saves the picture. The picture then
appears in that handset’s recent call list.
The first time you send a stored picture after
turning the handset on, Picture Fees May Apply
Continue? appears and you are prompted to
respond.
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
Note: When you download a picture to your
handset, make sure that it is unlocked.
send a picture during a call
1 While in a Private call, press - under
Picture or press M > Use PTT Feature > Send
Picture.
A list of pictures that can be included in a
Private call appears.
2 Select the picture you want to send.
3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
5 When prompted, press the PTT button to
resume the Private call.
Note: After you send or receive a picture via
PTT with a user, that picture will be displayed
every time you are in a private call with that
user. That picture is saved in the media center
and a link is created between that contact and
the picture.
handset features
65
start a call by sending a picture
A list of contacts that have Private IDs and
are able to receive pictures appears.
from My Pictures
Find it: M > My Pictures
2 Select the name of the person you want
to send the picture to.
1 Select the picture you want to send.
3 Select the picture you want to send.
2 Press M > Send via PTT.
4 Press the PTT button to send the picture.
3 Select A Contact or A Recent Call.
5 Once picture has been sent, when
prompted press the PTT button to resume
the call.
A list of contacts that have Private IDs and
are able to receive pictures appears.
4 Select the name of the person you want
to send the picture to.
receive a picture
5 Press the PTT button to send the picture.
When someone sends you a picture, your
handset emits a tone or vibrates and a
message appears asking if you want to accept
the picture.
6 When prompted, press the PTT button to
resume the Private call.
from the PT Manager:
Find it: M > PT Manager > Send Picture
1 Select A Contact or A Recent Call.
66
handset features
Pictures you receive are saved to your
handset’s memory. They are accessible
through My Pictures.
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
Tip: If you want to stop the transmission
before it is finished, press { .
Note: The first time you accept a stored
picture after turning the handset on, Picture Fees
May Apply Continue? appears and you are
prompted to respond. Press - under Yes to
accept the picture.
clear a picture from the display
If you want to clear a picture from your
handset’s display while still on a call, press
M > Clear Screen.
The picture will not appear on the display
again the next time you receive a call from
person who sent it. This does not delete the
picture from My Pictures.
send a datebook event
You can send an event already stored in
your handset’s datebook or create a new
datebook event to send. You can send
datebook events during Private calls, from the
Contacts list, Recent Calls list or from the PT
Manager.
to send a datebook event during a
private call
1 While in a Private call press M >
Use PTT Feature > Send Event.
Note: If these options do not appear on
the menu, the Private ID you are engaged
in a Private call with is not able to receive
Datebook events.
2 If you want to create a new datebook
event, press - under New and create the
event in your datebook. If you want to
chose an existing event do so.
handset features
67
3 If the event is a recurring event, select This
Event Only to send only the event selected.
Select Repeat Events to send all occurrences
of the event.
4 Push the PTT button to send the event.
send my info
1 While in a Private Call press M > Send via
PTT, and push the PTT button to send.
or
2 From the home screen press M >
My Info > M > Send via PTT.
3 Enter the recipient’s number.
or
Press - under Browse. Select Recent Calls,
Contacts, or Memo. Select the number you
want to enter.
4 Push the PTT button to send.
68
handset features
set my info sending option
You can control what portion of the
information in My Info is sent.
Find it: M > My Info > M > Send via PTT Setup >
Info To Send
1 Select the information. The information
your handset sends always includes My
Name and Private. You may also send Line 1,
Line 2, Carrier IP, and Circuit Data depending on
your sending options.
2 Press - under Done.
automatic sending
To control whether you send your information
automatically in every call:
Find it: M > PT Manager > Configure > PTT My Info >
Auto Send
1 Select On or Off
2 When you make a call in which your
information is sent automatically, the
name you entered in the My Name field of
My Info appears on the display of the
recipient’s handset, even if your name and
Private ID are not stored in the recipient’s
Contacts.
send contact number
1 While in a Private Call press M >
Use PTT Feature.
2 Select Send Contact and select the contact
information you want to send.
3 Push the PTT button to send.
or
4 Select the contact number you want to
send and push the PTT button.
turn PTT features on and off
You can turn your handset’s ability to send and
receive messages, pictures, and Datebook
events on and off.
You cannot turn your handset’s ability to send
and receive My Info and contact information
on and off.
Find it: M > PT Manager > Configure > On/Off PTT
1 Check or uncheck Messages, Pictures and
Events.
1 From the home screen press M >
PT Manager > Send Contact.
2 Enter the Private ID number of the person
you want to send the Contact information
to or press - under Browse.
3 Select from Recent Calls, Contacts, or Memo.
handset features
69
one touch PTT
Find it: M > u > 2-Way Radio> One Touch PTT
One Touch PTT sets your handset to do any of
the following each time you press the PTT
button from the home screen:
option
Off: Calls the Talkgroup, Hub, or MOTOtalk
channel assigned to the current position,
unless Talkgroup Silent is on, or the position
is unassigned, or the Talkgroup assignment
is bypassed with another affiliated
Talkgroup.
Quick PTT: Accesses the Quick PTT feature.
See “quick PTT” on page 71.
Last Call: Calls the most recent Private ID or
Group on the recent calls list (default
setting).
70
handset features
option
Assigned No.: Call a Private ID you assign.
Enter the number using your keypad, or
press - under Search. Select Contacts, Recent
Calls, or Memo.
If you are entering a Talkgroup number,
press # before the number.
PT Manager: Go to PT Manager. See “PT
manager” on page 71.
Send Message: Go to the first screen to send a
message. See “send messages” on
page 63.
Send Picture: Go to the first screen to send
pictures. See “send pictures” on page 65.
Send Event: Go to the first screen to send a
Datebook Event.
Send My Info: Go to the first screen to send My
Info. See “send my info” on page 68.
option
Send Contact: Go to the first screen to send a
contact. See “send contact number” on
page 69.
quick PTT
Quick PTT lets you quickly make a call,
create an SDG list or make a SDG call when
accessing any Private IDs on your handset.
To view a list of Contacts and SDG lists with
Private IDs in Contacts:
Find it: M > Quick PTT
To move between Contacts, Recent Calls, or Memo,
use the S left or right, or press * or #.
To make a Private call or SDG call:
To save your selections as a SDG list press
M > Save SDG. For more information about
SDG lists, see “selective dynamic group
(SDG) calls” on page 51.
If you want to assign a name to the SDG list,
enter the name.
Note: If you do not assign a name, the SDG
list is named SDG followed by the number of
members in the SDG list. For example, SDG
(8) for a SDG list with 8 members.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
1 Select the entries you want.
You can also access the Quick PTT feature and
set the One Touch PTT feature.
2 Press - under Done.
Find it: M > PT Manager
3 Push the PTT button.
handset features
71
1 Select Quick PTT to quickly find a contact
that has a Private ID.
or
2 Select Send Message, Send Picture, Send Event, Send
My Info, or Send Contact. After choosing what
PTT item you are sending, select a
contact and press the PTT button to send.
or
3 Select Configure to configure your PTT Quick
Notes, PTT My Info, One Touch PTT, or On/Off PTT.
menu items and the steps you take to access
features may differ.
create a message
Shortcut: From the home screen press under Msgs > [Create Message] > [Create MMS Msg].
or
Find it: M > Messages > [Create Message] >
[Create MMS Msg]
Note: You can also create a message from
Contacts, Recent Calls, or the home screen.
MMS
To address the message:
Multimedia Messaging Service (MMS) lets
you send and receive messages that may
include text, pictures and audio recordings.
1 Select To to bring up a list of address slots.
Depending on your service provider, your
handset may support MOSMS as well as
MMS. You should see no significant
differences between the two; some names of
72
handset features
2 Highlight a slot and press r.
3 Enter the phone number or email address
using the keypad.
or
Press Browse to select from Contacts or Recent
Calls.
more message options
4 Press r when done.
To view more message fields in a message
you are creating, select ...More...
5 Add additional phone numbers or email
addresses as necessary.
The following options become available:
Tip: To remove a phone number or email
address from the list of message recipients,
scroll to the phone number or email address
and press - under Remove.
6 When you are finished addressing the
message, press - under Back.
To enter or edit the body of the message:
1 Select Mesg.
2 Enter text using the keypad or press under QNotes to select a quick note of your
choice (see “quick notes” on page 74) and
press r.
option
Subject: Create or edit the Subject line.
Attach: Attach a picture, audio file, video or
voice record.
Cc: Send a copy of this message to
someone else.
Auto Replies: Allows you to create a list of
possible short answers for the recipient to
choose when replying to your message.
Priority: Set priority Normal or High.
Report: Set receipt confirmation On Delivery.
Valid Until: Set a date after which attempts to
deliver the message end, or press - under
No Date.
handset features
73
reply to a message
You can reply to a message while you are
viewing it, or while a previously viewed
message is highlighted in the message
center. You cannot reply to unread messages.
To reply to a message:
1 View the message you want to reply to.
2 To reply to the sender only, press Reply.
3 A list of short phrases appears. Select any
of these phrases to add it to your
messages or select [Create Reply].
these words or phrases, you can edit them as
you would any other text.
1 While you are creating a message, scroll
to or select Message or Subject.
2 Press - under QNotes.
3 Select the quick note you want to insert
into the message.
attach a picture and audio
recording or a ring tone
5 Press - under Send.
You can attach one or more pictures audio
recordings or ring tones from your handset
into the body of the message. You can include
text in the body of your message in addition
to these items.
quick notes
insert items
When you are filling in the Message and Subject
fields, you can add ready-made words or short
phrases called quick notes. After you add
While you are filling in the Attach field, press
[New] > My Pictures, VoiceRecord or Ring Tones.
4 Edit any message fields you want to
change.
74
handset features
A list of available pictures, audio recordings
and ring tones appears.
Select the picture, voice record or ring tone
you want to attach.
Tip: To view or listen to the item before
attaching it, highlight it and press View or Play.
Note: You can only attach audio files and
pictures if they are not forward locked and if
their DRM settings do not prevent you from
sending.
Forward locked items are usually copyright
protected, and you cannot share them with
anyone, such as in Private calls or by
uploading them from your handset.
2 Select Add VoiceRec > [New VoiceRec].
3 Say the message you want to record into
the microphone.
4 When you are finished recording,
press r.
5 When you are finished, press - under
Back and - under Done.
6 The voice record is attached to the
message and saved to the media center
and the list of voice records.
remove an attachment
To remove an attachment in a message you
are creating:
create a new voice record
1 Select Attach.
You can create a new voice record to send
with a message (if your handset supports
MMS):
2 Scroll to the attachment you want to
remove.
3 Press M > Unattach.
1 Within the created message, press M.
handset features
75
drafts
edit a draft
While composing a message you can save it
in the MMS drafts folder by pressing M >
Save.
Shortcut: From the home screen press under Msgs > Drafts > MMS Drafts.
You can continue to create the message. The
version you saved in the MMS drafts folder
will not change.
2 Press r.
send a draft
When you send a draft, it is removed from the
MMS drafts folder.
Shortcut: From the home screen press under Msgs > Drafts > MMS Drafts.
1 Select the draft you want to send.
2 Press - under Send.
Note: If Send does not show as an option,
you might need to complete required
fields in the message in order to send it.
1 Select the draft you want to edit.
delete a draft
1 To delete a message in the MMS drafts
folder without sending it, scroll to the
message you want to delete and press under Delete.
2 Press - under Yes to confirm.
MMS outbox
MMS messages you have sent or tried to
send are stored in the MMS Outbox.
76
handset features
forward items from the outbox
check delivery status
Shortcut: From the home screen press under Msgs > Outbox > MMS Outbox.
If a message was successfully sent and you
set the message to give a report confirming
delivery, you can check the delivery status:
1 Scroll to the message you want to
forward.
2 Press M> Forward.
Shortcut: From the home screen press under Msgs > Outbox > MMS Outbox.
3 Make editions if you wish, select the
recipient and press - under Send.
1 Scroll to the message you want to view.
resend
delete a message
If a message was not sent from your handset,
you can resend it.
1 Scroll to the message you want to delete.
Shortcut: From the home screen press under Msgs > Outbox > MMS Outbox.
1 Scroll to the message you want to resend.
2 Press - under Resend.
2 Press M > Delivery Status.
2 Press M > Delete Multiple.
3 Select the message or messages you
want to delete and press - under Delete.
4 Press - under Yes to confirm.
Note: If your message was sent successfully,
Resend will not appear as an option.
handset features
77
receive a message
When you receive an MMS message, a
message notification appears on the display.
1 To view the message press r.
If your handset is set to download new
messages automatically, the message
downloads from the message server now.
2 If your handset is set to prompt you
before downloading new messages,
press M.
3 If the message fills more than one screen,
scroll down to read it.
embedded objects and
attachments
Messages may contain pictures or audio
recordings as part of the body of the message
or as attachments.
78
handset features
If a message contains pictures or audio
recordings in the body of the message,
highlight each picture or audio recording to
view or play it.
If a message contains a picture or audio
recording as an attachment, open the
attachment to view the picture or play the
audio recording.
open attachments
1 View the message.
2 Highlight the attachment you want to
open. Attachments appear at the end of a
message.
3 Press r.
Note: Attachments that are of an unknown
type cannot be opened, but they can be
deleted.
view received messages from
the message center
messages cannot be deleted until you unlock
them.
Shortcut: From the home screen press under Msgs > Inbox > MMS Inbox.
1 View the message you want to lock or
unlock.
Select the message. If the message has not
yet been downloaded from the message
server, it is downloaded now.
delete unread messages
1 Scroll to the message you want to delete.
2 Press - under Delete and - under Yes to
confirm.
lock and unlock messages
Note: This feature exists in a handset that
supports MOSMS.
Lock messages so they will not be erased or
replaced by new messages. Locked
2 Press M > Lock Message or Unlock Message.
call a number in a message
If a message you receive contains a phone
number, Private ID, or Talkgroup ID in the From
field, the To field, the Cc field, the Subject field, or
the body of the message, you can call or send
a call alert to that number.
send a call alert
1 View the message.
2 Highlight the Private ID you want to alert.
3 Press M > Alert.
4 Push the PTT button.
handset features
79
make a group call from the
message
2 Highlight the number or email address
you want to save.
1 View the message.
3 Press M > Save Number or Save Email.
2 Press M.
3 Highlight the Talkgroup ID you want to
call.
4 Select Talkgroup.
5 Push the PTT button.
store message information to
contacts
If a message you receive contains a phone
number, Private ID, Talkgroup ID, or an email
address in the From field, the To field, the Cc
field, the Subject field, or the body of the
message, you can store this information to
Contacts.
1 View the message.
80
handset features
4 To store the number or email address as a
new entry, select [New Contact].
To store the number or email address to
an existing entry, select the entry.
5 With the Contacts type field highlighted,
press S left or right to display the
Contacts type you want to assign the
number or email address.
6 Press - under Save.
go to a website
If a message contains one or more website
URLs, you can go to that website.
1 View the message.
2 Highlight the website URL you want to go
to.
3 Press M > Go To Website.
Note: The entire URL must appear in the
message to allow you to open the
website.
save an embedded picture or
audio recording
To save a picture or audio recording that is
part of the body of a message you receive:
1 View the message.
delete an embedded picture or
audio recording
To delete a picture or audio recording that is
part of the body of a message you receive:
1 View the message.
2 Highlight the picture or audio recording
you want to delete and press M.
3 Select Delete Picture or Delete Audio.
save attachments
2 Highlight the picture or audio recording
you want to save.
1 View the message.
3 Press M.
2 Highlight the attachment you want to
save.
4 Select Save Picture or Save Audio.
3 Press M > Save Attachment.
The item will save in the default storage
location.
Note: Some types of pictures and audio
recordings can be viewed or played, but
not saved.
handset features
81
Selected items save to the default storage
location.
Note: Some types of pictures and audio
recordings can be viewed or played, but
not saved.
customize MMS
Shortcut: From the home screen press under Msgs > M > MMS Setup.
or
Find it: M > g > M > MMS Setup
delete attachments
1 View the message.
2 Highlight the attachment you want to
delete.
3 Press M > Delete Attachment.
4 Press - under Yes to confirm.
message transmission
After you start to send a message you have
created or start to download a message you
have been sent, you can still stop the
message transmission from being completed:
1 Press - under Cancel.
82
handset features
This option is available from many contextsensitive menus when you are using MMS.
The following options become available:
option
Friendly Name: Enter text here to create a
friendly name. Your friendly name is the
name displayed in the From field on other
iDEN handsets when they receive
messages from you.
Signature: Enter text here to create a
signature. Your signature is text that is
automatically inserted at the end of all
messages you create. You can edit the text
before sending the message.
option
Quick Notes: Lets you create new Quick Notes
and edit or delete Quick Notes you have
created.
Replies: Lets you create new reply phrases
and edit or delete reply phrases you have
created.
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted.
Downloads: Controls whether your handset
automatically downloads new messages
when they arrive, or only after you respond
to a prompt or read the message from the
Inbox. Set this option to Automatic if you want
your handset to download new messages
automatically; set the option to Manual if you
want your handset to prompt you before
downloading new messages.
option
Memory Size: Shows the total amount of Used,
Free:, and total Capacity of the handset’s
memory.
new quick notes and reply
phrases
Note: These Quick Notes are not the same as
the quick notes used with MOSMS
messages. Each messaging service has its
own quick notes feature.
create quick notes
1 From the MMS Setup menu, select Quick
Notes or Replies.
2 Select [New QuickNote] or [New Reply].
3 Enter text from the keypad and press r.
handset features
83
edit quick notes
You can edit only Quick Notes and reply
phrases you have created.
1 From the MMS Setup menu, select Quick
Notes or Replies.
delete all quick notes or all reply
phrases you have created
1 From the MMS Setup menu, select Quick
Notes or Replies.
2 Press M > Delete All.
2 Select the quick note or reply phrase you
want to edit.
3 Press - under Yes to confirm.
3 Edit the text and press r.
clean up options
delete only quick notes and reply
phrases you have created
1 From the MMS Setup menu, select Quick Notes
or Replies.
2 Scroll to the quick note or reply phrase
you want to delete.
The clean up option controls how long
messages remain in the Inbox and Outbox
before they are deleted. You set the clean-up
option for the Inbox and Outbox separately.
The clean up option deletes only read,
unlocked messages.
3 Press - under Delete.
Shortcut: From the home screen press under Msgs > M > MMS Setup > Cleanup.
4 Press - under Yes to confirm.
or
Find it: M > g > M > MMS Setup > Cleanup
84
handset features
1 Select Inbox or Sent Items.
2 Choose a clean up option from the
following list:
option
Off: Messages are never automatically
deleted.
5 Messages: If you have more than 5
messages, messages are deleted in the
order they were received, starting with the
oldest, until 5 are left.
10 Messages: If you have more than 10
messages, messages are deleted in the
order they were received, starting with the
oldest, until 10 are left.
With these options, messages are deleted
in the order they were received, starting
with the oldest, until the selected number
are left.
option
1 Day: Messages are deleted if they are older
than 1 day.
3 Days: Messages are deleted if they are
older than 3 days.
With these options, messages are deleted
when you exit the message center after
setting the option.
Custom: Lets you create a clean-up option of
up to 99 messages or 99 days.
3 Press - under Yes to automatically delete
messages now or press - under No to
delete messages later.
delete all messages
To delete all read, unlocked messages from
the Inbox, all messages in the Drafts folder, or
all successfully sent messages in the Outbox:
handset features
85
Shortcut: From the home screen press under Msgs.
turn Bluetooth On or Off
Find it: M > g
You can turn your handset’s Bluetooth feature
on or off. While Bluetooth power is on, your
handset can communicate with other devices.
1 Select Inbox, Drafts, or Outbox.
Find it: M > Bluetooth > Setup > Power
2 Select MMS Inbox, MMS Drafts, or MMS Outbox.
1 Select On to power Bluetooth On.
3 Press M > Delete All.
2 Select Name if you wish to assign a name
to your handset.
or
4 Press - under Yes to confirm.
Bluetooth®
Your handset supports the use of wireless
Bluetooth headsets.
Find it: M > Bluetooth
The Bluetooth connection menu contains an
option to search for audio devices.
86
handset features
3 Select Find Me Time to determine the
amount of time in which your handset can
be found by other Bluetooth devices.
Tip: You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
make a Bluetooth connection
connect your handset with a Bluetooth
headset
Find it: M > Bluetooth > Hands Free > [Find Devices]
1 Follow the instructions on your Bluetooth
headset to set it up to be found.
2 Once your Bluetooth headset is set to be
found press r on your handset. Your
handset will scan the Bluetooth headset
until it finds it. Press r when you see
the name of the Bluetooth headset on
your screen.
3 Your handset requires that you create a
bond in order to connect with a Bluetooth
headset. Press - under Yes when you are
prompted to bond with the headset.
4 Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
If a device ships without a Bluetooth PIN,
then you can enter any PIN for that
device. To establish a connection to that
device, enter the same PIN for both your
handset and the device. For example, if
you enter 1234 as the device’s PIN, then
enter 1234 as your handset’s PIN.
5 Press - under Ok.
Note: This handset offers Bluetooth auto pair
feature with auto pair compatible Motorola
devices. When bonded via Bluetooth with a
certain device, the pin will not be required.
connect your handset with another
Bluetooth device
Find it: M > Bluetooth > Link To Devices
1 Select the device you want from the list of
found devices on your screen.
handset features
87
2 Create a bond if you are prompted to do
so.
Tip: If you have previously connected to a
device, the device will be stored on your
handset so you can connect with it easily.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
Note: If the Handsfree Devices list contains only
one device, then your handset will
automatically try to connect to that device.
1 While in a call, press M > Use Bluetooth.
2 Press - under Yes to power On
Bluetooth.
3 Select the audio device you want to
connect to from the list of Handsfree Devices.
88
handset features
send information via Bluetooth
You can use your handset to send contacts
entries, or datebook events to another
Bluetooth device.
The receiving device must be within 32 feet
(10 meters) of your handset in order to
connect with yours.
Note: Files sent or received may be up
to 200 kB, depending on your service
provider.
send Contacts
Shortcut: From the home screen press under Contcs.
1 Select the contact you want to send.
2 Press M > Send Via... > Bluetooth.
3 Press - under Yes to power On
Bluetooth.
4 Select the device you want to transfer the
contact information to.
To send only the selected instance of the
event, select This Event Only.
or
or
Search for the device by selecting [Find
Devices].
To send all instances of the event, select
Repeat Events.
5 If prompted, bond with the device.
Your handset connects with the devices
and transfers the contact.
send a Datebook event
Find it: M > Datebook
1 Select the datebook event you want to
send.
2 Press M > Send Via... > Bluetooth.
If the event you select repeats, then you
will be prompted to choose whether to
send the selected instance of the event or
all instances of the event.
3 Press - under Yes to power On
Bluetooth.
4 Select the device you want to transfer the
contact information to.
or
Search for the device by selecting [Find
Devices].
5 If prompted, bond with the device.
Your handset connects with the device
and sends the datebook event.
handset features
89
use dual SIM cards
When changing the active SIM card, the
following features also change:
Active SIM
• Ringtones assigned to phone numbers
1 Press r.
• Contacts list
2 Scroll to the SIM you want to activate.
• Voice data (tags and notes)
3 Press r to confirm the change.
• Recent calls list
• Datebook entries
change SIM card at power up
Find it: M > u > Advanced > Dual SIM
• Call Forwarding entries
1 Scroll to On Power Up.
• Memo pad entries
2 Choose an option from the following list:
• Net Alerts
• Profiles Call Filtering
• User Network ID information
• My information
90
change the active SIM card
Find it: M > u > Advanced > Dual SIM >
handset features
option
Set to SIM1: On power up, SIM card 1 will be
active.
Set to SIM2: On power up, SIM card 2 will be
active.
No Change: On power up the currently
selected SIM card will be active.
select frequency band
This feature allows you to operate your
handset on two frequencies: 800 MHz and
900 MHz. After you select 800 MHz as the
primary band, the 900 MHz band will become
the secondary band.
Find it: M > u > Advanced > Band Selection
1 Press r.
2 Choose an option from the following list:
option
On Power Up: Select to power on in the
800 MHz band, 900 MHz band, or in the
active band.
Active Band: Set the active band to 800 MHz or
900 MHz at power off.
handset features
91
MOTOtalkTM
MOTOtalk allows direct two-way handset-tohandset communications between two or
more handsets equipped for MOTOtalk. You
can make and receive MOTOtalk calls even
when network service is not available. You
can talk to anyone on your code and channel
within your range.
Note: Range will vary based on terrain, manmade structures and atmospheric conditions.
MOTOtalk allows you to:
• Use code or Private mode operation
• Use up to 10 channels
• Communicate with standalone
MOTOtalk radios
Note: MOTOtalk is not compatible with older
Family Radio Services products.
92
MOTOtalkTM
The following features and main menu items
will not be available while in MOTOtalk:
• On-network Phone calls
• On-network Private calls
• Data transmission
• Incoming message notification
• Musical ring tones
• Call forwarding
• Messages
• Call Timers
• Call alerts
• Voice records
• On network Talkgroups or Hub calls
channels and codes
Your handset has 10 channels and 15 codes.
Channels are divided into sets of frequencies
that allow you to make and receive MOTOtalk
calls. Other parties may also be talking on the
same channel.
Codes help minimize interference from
unwanted messages and other disturbances
when you are on the same channel as others.
Note: When making a code call, all parties
that are on your code and channel can hear
your conversation.
talkgroup knob use
See “group calls, talkgroups, sets, and hubs”
on page 25.
enter MOTOtalk
To have a conversation, all parties must be on
the same channel and code. For Private
MOTOtalk calls, the person you are calling
must be in MOTOtalk and set to the same
channel to receive your call.
1 From the main menu, scroll to MOTOtalk
and press r.
Handsets used in MOTOtalk mode should be
a minimum of 6 feet apart to maximize
performance and improve transmission range.
After a few seconds, the MOTOtalk idle
screen appears. MT Ready appears on the first
line of the display. The code you are set to
appears on the second line of the display. The
2 Select Go to MOTOtalk.
Switching to MOTOtalk Please Wait displays.
MOTOtalkTM
93
channel you are set to appears on the third
line of the display.
Note: When switching from the network to
MOTOtalk, the last channel and code that
were set appear on the MOTOtalk idle screen.
While in MOTOtalk, this icon m appears on
the display, indicating that there is no network
signal and MOTOtalk is active.
exit MOTOtalk
1 From the MOTOtalk idle screen, press
M.
set a channel
1 From the MOTOtalk idle screen, press under Edit.
2 Scroll to Channel.
3 Press - under Edit.
4 Select a channel.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.
set a code
2 Scroll to MT Options and press r.
1 From the MOTOtalk idle screen, press under Edit.
3 Select Exit MOTOtalk.
2 Scroll to Code.
Switching to Network Please Wait displays. After a few
seconds, the network idle screen appears.
3 Press - under Edit.
4 Select a code.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.
94
MOTOtalkTM
make and receive a
code call
1 Press and hold the PTT button. MT Transmit
appears on the first line of display. Begin
speaking after your handset emits the
MOTOtalk tone.
2 Release the PTT button to listen.
The tone emitted from your handset when
using MOTOtalk is 4 beeps and sounds
different from the standard tone heard with
on-network Private and group calls.
If you receive an error message:
• There may be no parties on your
channel or code.
• You are out of range.
When you receive a code call using
MOTOtalk, MT Receive appears on the first line
of the display.
Note: An incoming MOTOtalk call can
be terminated at any time by
pressing { .
set to receive all
You can set your handset to receive
MOTOtalk transmissions from any handset
that is set to the same channel, regardless of
the code (1-15), by setting the code to Receive
All. When you receive transmissions with the
code set to Receive All, the display changes
from Receive All to the code on which the
transmission was received.
Tip: You can reply to an incoming call within 6
seconds after hearing the short ending beep
by pressing the PTT button.
Note: You cannot initiate a code call when the
code is set to Receive All. If you press the PTT
button with the code set to Receive All, you will
receive an error message.
MOTOtalkTM
95
To set the code to Receive All:
1 From the MOTOtalk idle screen, press under Edit.
2 Scroll to Code.
3 Press - under Edit.
4 Select Receive All.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.
private calls
You can have a private conversation with
another person using MOTOtalk. When on a
Private MOTOtalk call, no other parties can
hear your conversation. In order to make a
Private MOTOtalk Call, you must use the valid
10-digit Personal Telephone Number (PTN) of
the person you are calling. The person you are
calling must be in MOTOtalk and set to the
same channel to receive your call.
96
MOTOtalkTM
If you receive an error message:
• You may not be using a valid PTN.
• The person that you are trying to reach
may not be in MOTOtalk.
• The person that you are trying to reach
is set to a different channel or is out of
range.
Private Only
To limit MOTOtalk to private conversation
only, set your code to Private Only. In this
mode, code calls will be ignored and only
Private calls can be made or received.
Note: You will be required to enter a valid PTN
before pressing the PTT button.
set the code to Private Only
1 From the MOTOtalk idle screen, press under Edit.
2 Scroll to Code.
receive a private MOTOtalk call
3 Press - under Edit.
The number or name of the person who
initiated the call will appear in the first line of
the display.
4 Select Pvt Only.
make a Private MOTOtalk call
1 Enter the 10-digit PTN of the person you
want to call on your channel.
or
Scroll to a number or name in Contacts.
or
Scroll to a number in the recent calls list.
2 Press and hold the PTT button. Begin
speaking after your handset emits the
MOTOtalk tone.
Note: You can reply within 6 seconds simply
by pressing the PTT button.
end a private MOTOtalk call
A Private MOTOtalk call will end if there is no
communication for 6 seconds.
Note: A Private MOTOtalk call may be
interrupted during the 6 second idle time by
another code call or Private call.
The display will return to the MOTOtalk idle
screen.
3 Release the PTT button to listen.
The number or name of the person you are
calling will appear in the first line of the
display.
MOTOtalkTM
97
emergency calls
Emergency phone calls can still be made even
when you are not connected to network
service.
Dial 911 to be connected to an emergency
response center. If you are on an active
MOTOtalk call, you must end it before calling
911.
setup options
MOTOtalk setup options are available in the
MT Options screen in both network and
MOTOtalk modes.
To access Setup Options in network:
1 From the main menu, select MOTOtalk.
2 Select Setup.
To access Setup Options in MOTOtalk:
1 From the main menu, select MT Options.
98
MOTOtalkTM
2 Select Setup.
You can set your handset to:
• Launch directly into MOTOtalk when
you select MOTOtalk from the main
menu.
• Notify you periodically with a tone that
you are in MOTOtalk.
use direct launch
To set your handset to launch MOTOtalk
when you select MOTOtalk from the main
menu:
1 From the Setup screen, scroll to Direct
Launch and press - under Change.
2 Select On.
Note: If Direct Launch is set to On, you will not
see MT Options when you select MOTOtalk from
the main menu. In order to have access to
your setup options, Direct Launch must be set to
Off. Or you can access setup options while in
MOTOtalk by pressing M and selecting MT
Options.
For example, if you select 1 hour, you will be
notified every hour that you are in MOTOtalk.
To turn off Direct Launch:
1 From the Setup screen, scroll to State Tone
and press - under Change.
1 From the Setup screen, scroll to Direct
Launch and press - under Change.
To turn off State Tone:
2 Select Off.
2 Select Off.
Your handset now displays MT Options when you
select MOTOtalk from the main menu.
use state tone
To set your handset to notify you with a tone
that you are in MOTOtalk:
1 From the Setup screen, scroll to State Tone
and press - under Change.
2 Select the time frame during which you
want to be notified that you are in
MOTOtalk.
MOTOtalkTM
99
customize your handset
ring tones
To set the ring tone your handset makes
when you receive Phone calls, call alerts,
message notifications, pictures sent using
Send via PTT or Datebook reminders:
Note: Only ring tones stored in your handset’s
memory are available in the ring tones list.
Not all audio files can be assigned as ring
tones.
Find it: M > Ring Tones
1 Make sure Vibrate All is set to Off.
2 Scroll through the list of ring tones and
select the one you want to assign. Vibrate
sets your handset to vibrate instead of
100
customize your handset
making a sound; Silent sets your handset to
neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
3 Select the features you want to assign the
ring tone to.
4 When you are finished, press - under
Done.
Note: This icon M appears on the display if
you set your handset to Silent. This icon Q
appears on the display if you set the handset
to Vibrate All.
set your handset to vibrate
You can set your handset to vibrate instead of
making a sound when you receive all Phone
calls, Private calls, Group calls, SDG calls, call
alerts, messages notifications, pictures sent
using Send via PTT, and Datebook reminders.
wallpaper
Find it: M > Ring Tones > Vibrate All
Set a previously saved photo or picture as a
wallpaper (background) image in your
handset’s display or throughout all menu
screens.
Set this option to On or Locked.
To set your handset to vibrate instead of
making a sound for some features but not
others:
Find it: M > Ring Tones
1 Make sure Vibrate All is set to Off.
2 Select Vibrate from the list of ring tones.
3 Select the features you want to set to
make no sound.
4 When you are finished, press - under
Done.
Find it: M > u > Display/Info > Wallpaper
1 Select Wallpaper.
2 Scroll through the list of pictures and
press r to select the picture of your
choice.
Note: You can set the wallpapers to change
automatically after a certain period of time by
turning on the Auto Cycle feature located in the
Wallpaper menu.
datebook
Find it: M > Datebook > M > Setup
customize your handset
101
You can view or change these options:
options
Start View: Sets Datebook to start in day view,
week view, or month view when you
access Datebook.
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in
week view, if you have a 12-hour day view.
Delete After: Sets the amount of time
Datebook waits to delete an event after it
occurs.
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
Alert Timeout: Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
Clock: Controls whether the time and date
appear on the home screen; sets time and
date format; sets year.
102
customize your handset
hide or show
location information
Your handset is equipped with a Location
feature for use in connection with locationbased services that may be available in the
future.
The Location feature allows the network to
detect your position. Turning Location Off will
hide your location from everyone except 911.
Note: Turning Location On will allow the
network to detect your position using GPS
technology, making some applications and
services easier to use. Turning Location off
will disable the GPS location function for all
purposes except 911, but will not hide your
general location based on the cell site serving
your call. No application or service may use
your location without your request or
permission. GPS-enhanced 911 is not
available in all areas.
set your privacy options
Find it: M > GPS > Privacy
Select from the following options:
option
Restricted: No Java or similar software
applications may view the location of your
handset. However, location information may
still be available to the handset’s owner,
fleet manager, or account administrator.
Unrestricted: All applications may view the
location of your handset, without notifying
you.
Ask Access: When an application attempts to
view the location of your handset, you will
be prompted to give permission. However,
location information may still be available to
the handset’s owner, fleet manager, or
account administrator.
customize your handset
103
other handset features
advanced calling
feature
call waiting
feature
3-way call
To accept the second call
and put the active call on
hold press - under Yes.
Make or receive a handset
call and press M > 3 Way.
Enter the second handset
number, press M and under Join.
To accept the second call
and end the active call press
}.
For quick ways to enter the
number, press M to see
the dialing menu.
Your handset rings with the
second call for you to
answer.
104
other handset features—advanced calling
You cannot make any other
calls after you have joined a
3-way call, even if one party
disconnects.
feature
any key
answer
datebook
To answer Phone calls by
pressing any key on the
keypad press M > u >
Phone Calls > Any Key Ans > On.
contacts
feature
edit/delete
contact
entry
Press - under Contcs. Select
a contact and press M >
Edit. Change the desired
content and press - under
Done.
set ringer ID Press - under Contcs. Select
a contact and press M >
Edit > Ringer.
feature
create
datebook
events
see
datebook
event
event
reminder
To create a new Datebook
event press M > Datebook >
[New Event].
To see a calendar event
press M > Datebook. Press
S left or right to see the
day and S up or down to
see the events.
When an event reminder
occurs press - under View.
Press - under Back to close
the reminder.
Select desired ringer and
press - under Back >
- under Done.
other handset features—contacts
105
feature
receive
datebook
events via
PTT
• Remain stationary
To view the information
while still in the Private call
press r.
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent calls
list.
To store events to the
Datebook press - under
Save while viewing the event
you want to store.
GPS
Note: To improve GPS performance:
• Stay in the open
• Move away from other electrical or
electronic devices
106
other handset features—GPS
• Avoid touching the antenna with your
hands.
feature
view
approximate
location
set GPS
privacy
options
To see your approximate
location press M > GPS >
Position. Scroll to view the
entire screen.
To recalculate position press
Rfrsh. This may take several
minutes.
To set the level of privacy for
your GPS system press
M > GPS > Privacy.
If your GPS PIN security
feature is enabled, enter
your GPS PIN and select the
privacy option you want.
feature
change GPS Note: When you receive
PIN
your handset, your GPS PIN
is 0000.
To change your GPS PIN
press M > u > Security >
Change Passwds > GPS PIN. Enter
the current GPS PIN and
enter the new 4- to 8-digit
GPS PIN. Re-enter the new
4- to 8-digit GPS PIN to
confirm.
handsfree
Note: The use of wireless handsets while
driving may cause distraction. Discontinue a
call if you can't concentrate on driving.
Additionally, the use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey the
laws and regulations on the use of these
products.
feature
speaker
To activate the
speaker while driving
press and hold the
Speaker key " .
other handset features—handsfree
107
feature
auto
answer
To automatically answer
calls when connected to a
car kit or headset press
M > u > Phone Calls >
Auto Ans.
Select the amount of rings
before answering.
my info
feature
view my
info
108
To view information about
your handset and send this
information to other
handsets, select M >
My Info. See Options below.
other handset features—my info
feature
enter or
change the
text that
appears in
Name
Select M > My Info. Press
- under Edit. Select Name.
options
My Name: You can enter your name here.
Line 1 and Line 2: Your phone numbers for
phone lines 1 and 2.
Private ID: Your Private ID is the number that
others use to contact you using Private
calls. It is filled in when you receive your
first Private call.
Group ID: The number of the Talkgroup you
have joined.
IMEI (International Mobile Equipment
Identity), SIM ID, and Serial Number (SN).
Please be prepared to supply the
representative with this information when
requesting these types of transactions.
options
Carrier IP: The IP address assigned to the
carrier. This number appears when you
register for packet data services.
IP1 Address and IP2 Address: The IP addresses
you use to access the Internet with your
handset.
Circuit Data: The number you use if you want
to use your handset to transfer circuit data.
See “using your handset as a modem” on
page 55. You receive this number from the
carrier.
pc applications
feature
For a list of complete PC
other PC
applications applications visit:
www.motorola.com/support
Note: If you request equipment-related
transactions on your account, the carrier
Customer Service may require you to provide
specific information about your handset. By
pressing m anytime while in My Info, a
submenu will appear that includes your
handset's service status, unit information,
and handset identification numbers including
personalize
feature
language
To set the language of your
menu press M > u >
Display/Info > Language.
other handset features—pc applications
109
feature
backlight
time length
menu style
clock
display
security
To select how long the
display screen and keypad
are backlit press M > u >
Display/Info > Backlight.
To display the main menu as
tabs, graphic icons or a textbased list press M > u >
Display/Info > Menu View.
To display the clock on the
home screen press M >
u > Display/Info > Clock >
Display > On.
feature
phone lock
keypad lock
enable SIM
PIN
110
other handset features—security
To lock the handset press
M > u > Security >
Phone Lock > Lock Now or
Auto Lock.
To lock the keypad press
M > u > Security >
Keypad Lock > Lock Now or
Auto Lock or After Prvt (see
following page). Select the
required setting for After Prvt:
0ff, 10, 20, or 30 seconds.
Shortcut: To lock the
keypad press M > *.
To enable SIM PIN, press
M > u > Security > SIM PIN >
On.
feature
change SIM
PIN
TTY
To change the SIM PIN,
press M > u > Security >
Change Passwds > SIM PIN.
With keypad lock, you can receive calls and
the handset prompts you to answer. With
phone lock, the handset is shut down and
calls/alerts go to voicemail.
When your handset receives a Private or
Talkgroup call, the keypad lock will unlock for
the amount of time you selected. If you do
not answer the call in that amount of time, the
keypad will automatically lock again. If you
answer the call, and once the handset returns
to the handset idle state, the keypad lock will
be automatically reengaged.
To use your phone to make phone
calls using a teletypewriter (TTY)
device:
1 Connect the TTY accessory (AAHLN9717)
to the UC connector.
2 Connect one end of a 3.5mm cable into
the TTY accessory on your phone.
Connect the other end of the cable to your
TTY device.
3 Make sure that your phone’s TTY feature
is on and select the TTY mode you want
to use.
4 Use your phone to enter phone numbers
and make calls.
other handset features—TTY
111
When you make a TTY call, these icons
appear on the handset’s display:
N
Phone call is active.
O
Phone call is on hold.
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not
supported by your handset. These features
must be turned off or disabled to use your
TTY device with your handset.
feature
turn On TTY From the home screen
feature
press M > u >
Phone Calls > TTY > Use TTY > On.
112
other handset features—TTY
feature
choose TTY
mode
change the
TTY baud
rate
From the home screen
press M > u >
Phone Calls > TTY > Type.
Select from TTY, VCO or HCO.
See Options below.
From the home screen
press M > u >
Phone Calls > TTY > Baud.
Select 45.45 or 50.00. See
Options below.
While in the TTY call, press
M > In Call Setup > TTY > Type.
change TTY
mode
during a call Select from TTY, VCO or HCO.
options
TTY: You type and read text on your TTY
device.
VCO: (Voice-Carry-Over) — You speak into
your phone and read text replies on your
TTY device.
HCO: (Hearing-Carry-Over) — You type text
on your TTY device and listen to voice
replies on your handset speaker.
45.45: The baud rate required for TTY calls
within the U.S.
50.00: The baud rate required to make TTY
calls outside the U.S.
Important: When you are using HCO,
the sound coming from your handset
speaker may be uncomfortably loud.
Use caution when putting the phone to
your ear. (For information on setting the
volume of your handset speaker, see
“volume” on page 18.)
other handset features—TTY
113
114
other handset features—TTY
Important Safety and
Legal Information
115
Safety and General Information
This section contains important information on the safe and
efficient operation of your phone. Read this information
before using your integrated multi-service portable radio.*
Safety Information
Exposure to Radio Frequency (RF)
Energy
Your phone contains a transmitter and receiver. When it is ON, it
receives and transmits RF energy. When you communicate with
your phone, the system handling your call controls the power level
at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
Portable Radio Product Operation and
EME Exposure
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
116
Safety Information
• United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
• American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition .*
• Institute of Electrical and Electronics Engineers (IEEE).
IEEE 1528 -2003.
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
• International Electrotechnical Commission standard IEC
62209-1
• Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
* The information provided in this document supersedes
the general safety information in user’s guides
published prior to May 1, 2006.
• Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
• ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) "Regulation of the limitation of exposure to
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2, 2002."
Operational Precautions
To assure optimal radio product performance and to be sure that
human exposure to RF does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions:
Phone Operation
When placing or receiving a phone call, hold your radio product as
you would a wireline telephone. Speak directly into the
microphone.
Two-way radio operation
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips.
If you wear a radio product on your body when
transmitting, always place the radio product in a Motorola
approved clip, holder, holster, case or body harness. If you do not
use a body-worn accessory supplied or approved by Motorola and
are not using the radio product in the intended use positions along
side the head in the phone mode or in front of the face in the
two-way radio mode, or if you hang your device from a lanyard
around your neck, keep the device at least 2.5 centimeters (1 inch)
from your body when transmitting.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or
visit our website at www.motorola.com/support.
Safety Information
117
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your handset may cause interference with other
devices.
Follow Instructions to Avoid Interference
Problems
Turn OFF your radio product where posted notices instruct you to
do so.
In an aircraft, turn off your radio product whenever instructed to do
so by airline staff. If your radio product offers an airplane mode or
similar feature, consult airline staff about using it in flight.
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this radio
product.
Persons with implantable medical devices should observe the
following precautions:
• ALWAYS keep the phone more than 20 centimeters (8
inches) from the implantable medical device when the
phone is turned ON.
• DO NOT carry the phone in a breast pocket;
118
Safety Information
• Use the ear opposite the implantable medical device to
minimize the potential for interference.
• Turn OFF the phone immediately if you have any reason to
suspect that the interference is taking place.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with your implantable medical device, consult
your health care provider.
Hearing Aids
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
Other Medical Devices and Health Care Facilities
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Bluetooth
This device supports Bluetooth 2.0 including EDR and A2DP Stereo
profiles. In order for Bluetooth devices to communicate with one
another, they must utilize the same Bluetooth profile. To determine
the profiles supported by other Motorola devices, visit
www.hellomoto.com/bluetooth. For other devices, contact their
respective manufacturer.
Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth-enabled devices, and/or the
functionality of such features may be limited in certain devices, or
by certain wireless carriers. Contact your wireless carrier about
feature availability and functionality.
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Driving Precautions
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
Check the laws and regulations on the use of radio products in the
area where you drive. Always obey them.
When using your radio product while driving, please:
• Give full attention to driving and to the road. Using a
phone may be distracting. Discontinue a call if you can’t
concentrate on driving.
• Use hands free operation, if available.
• Pull off the road and park before making or answering a
call if driving conditions so require.
• Do not place a handset in the airbag deployment area.
Responsible driving practices can be found in the “Smart Practices
While Driving” section at the end of this guide and/or at the
Motorola Web site: www.motorola.com/callsmart.
Note: The use of wireless phones while driving may cause
distraction. Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may
Operational Warnings
Obey all posted signs when using phones in public areas.
Potentially Explosive Atmospheres
Batteries and Chargers
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
Safety Information
119
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Symbol
Definition
032374o
032376o
032375o
Important safety information
follows.
Do not dispose of your battery
or phone in a fire.
Your battery or phone may
require recycling in
accordance with local laws.
Contact your local regulatory
authorities for more
information.
Do not throw your battery or
phone in the trash.
Li Ion BATT
032378o
Your phone contains an
internal lithium ion battery.
Do not let your battery,
charger, or phone get wet.
Listening at full volume to
music or voice through a
headset may damage your
hearing.
120
Safety Information
Choking Hazards
Your portable radio or its accessories may include detachable
parts, which may present a choking hazard to small children. Keep
your device and its accessories away from small children.
Glass Parts
Some parts of your phone may be made of glass. This glass could
break if the product is dropped on a hard surface or receives a
substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your phone until the glass is replaced by a
qualified service center.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your phone.
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Caution About High Volume Usage
Listening at full volume to music or voice through a
headset may damage your hearing.
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
To see additional information regarding licenses,
acknowledgments and required copyright notices for open source
packages used in this Motorola mobile device, follow these
instructions:
From the phone Main Menu, select Java Apps >
OpenSourceNotices.
Open Source Software Information
You may choose to obtain a copy of any source code being made
publicly available by Motorola directly from the Motorola website
opensource.motorola.com.
Additionally, for instructions on how to obtain a copy of any source
code being made publicly available by Motorola related to
software used in this Motorola mobile device, please send your
request in writing to:
MOTOROLA, Inc.
OSS Management
600 North US Hwy 45
Libertyville, IL 60048
USA.
Motorola has created the www.opensource.motorola.com to serve
as a portal for interaction with the software community-at-large.
Safety Information
121
Service & Repairs
If you have questions or need assistance, we’re here to help.
Go to www.motorola.com/support, where you can select from a
number of customer care options. You can also contact the
Export Law Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
Service & Repairs
122
Service & Repairs
Motorola Customer Support Center at 1 (800) 453-0920 (United
States).
Specific Absorption Rate Data
ALL MODELS WITH FCC-ID AZ489FT5856 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are
conducted using standard operating positions reviewed by the FCC
with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
SAR Data
general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that is does not exceed the limit
established by the requirement adopted by the government for
safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for
each model. The highest SAR value for this model phone when
tested for use at the head: 1.54 W/kg and when tested on the
body: is 1.38 W/kg. (Measurements for phones worn on the body
differ among models, depending upon available accessories and
FCC requirements.)2
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement for safe exposure. Please note that improvements to
this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
(CTIA) web-site at http://www.ctia.org or the Canadian Wireless
Telecommunications Association (CWTA) Web site:
http://www.cwta.ca
SAR Data
123
1. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to account
for any variations in measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for
this product.
124
SAR Data
Limited Warranty Motorola Communications Products
(International)
Warranty
What Does this Warranty Cover?
MOTOROLA warrants the MOTOROLA manufactured iDEN
Communication Products listed below (“Product”) against defects
in material and workmanship under normal use and service for a
period of time from the date of purchase as scheduled below:
Products Covered
Length of Coverage
iDEN Subscriber
Digital Mobile and
Portable Units
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Product Accessories
(manufactured by or
under license from
MOTOROLA).
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Batteries.
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Rechargeable Batteries will be replaced during the applicable
warranty period if:
• the battery capacity falls below 80% of rated capacity, or
• the battery develops leakage.
MOTOROLA, at its option, will at no charge either repair the
Product (with new or reconditioned parts), replace it (with a new or
reconditioned Product), or refund the purchase price of the Product
during the warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or boards are
warranted for the balance of the original applicable warranty
period. All replaced parts of Product shall become the property of
MOTOROLA.
This express limited warranty is extended by MOTOROLA to the
original end user purchaser only and is not assignable or
transferable to any other party. This is the complete warranty for
the Product manufactured by MOTOROLA. MOTOROLA assumes
no obligations or liability for additions or modifications to this
warranty unless made in writing and signed by an officer of
MOTOROLA. Unless made in a separate agreement between
Warranty
125
MOTOROLA and the original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary
equipment not furnished by MOTOROLA which is attached to or
used in connection with the Product, or for operation of the Product
with any ancillary equipment, and all such equipment if expressly
excluded from this warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims liability for range,
coverage, or operation of the system as a whole, or any portion of
the system not produced by MOTOROLA, under this warranty.
General Provisions:
This warranty sets forth the full extent of MOTOROLA’S
responsibilities regarding the Product, Repair, replacement or
refund of the purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO
THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO
EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS
OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF
USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST
PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
126
Warranty
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH
MAY BE DISCLAIMED BY LAW.
How to Get Warranty Service:
You must provide proof of purchase (bearing the date of purchase
and Product item serial number) in order to receive warranty
service and, also, deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of
its authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or
communication service provider), it can facilitate your obtaining
warranty service.
What This Warranty Does Not Cover:
• Defects or damage resulting from use of the Product in
other than its normal and customary manner.
• Defects or damage from misuse, accident, water, or
neglect.
• Defects or damage from improper testing, operation,
maintenance, installation, alteration, modification, or
adjustment.
• Breakage or damage to antennas unless caused directly by
defects in material workmanship.
• A Product subjected to unauthorized Product
modifications, disassembles or repairs (including, without
limitation, the audition to the Product of non-MOTOROLA
supplied equipment).
• Product which has had the serial number removed or made
illegible.
• Rechargeable batteries if:
Any of the seals on the battery enclosure of cells are
broken or show evidence of tampering.
The damage or defect is caused by charging or using the
battery in equipment or service other than the Product for
which it is specified.
• Freight costs to the repair depot.
• A Product which, due to illegal or unauthorized alteration
of the software/firmware in the Product, does not function
in accordance with MOTOROLA’S published specifications
or the local type acceptance labeling in effect for the
Product at the time the Product was initially distributed
from MOTOROLA.
• Scratches or other cosmetic damage to Product surfaces
that does not effect the operation of the Product.
• Normal and customary wear and tear.
• Exclusion for defects or damage arising from use of the
products in connection with non-MOTOROLA equipment.
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a patent, and Motorola will
pay those costs and damages finally awarded against the end user
purchaser in any such suit which are attributable to any such
claim, but such defense and payments are conditioned on the
following:
• That MOTOROLA will be notified promptly in writing by
such purchaser of any notice of such claim;
• That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
• Should the Product or parts become, or in MOTOROLA’S
opinion be likely to become, the subject of a claim of
infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure
for such purchaser the right to continue using the Product
or parts or to replace or modify the same so that it
becomes non infringing or to grant such purchaser a credit
for the Product or parts as depreciated and accept its
return. The depreciation will be an equal amount per year
over the lifetime of the Product or parts as established by
MOTOROLA.
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Warranty
127
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential
damages arising from any claim of patent infringement or alleged
infringement.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
128
Warranty
Information From the World Health Organization
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
WHO Information
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf
Product Registration
Online Product Registration:
http://direct.motorola.com/hellomoto/
Motosupport/source/registration.asp
Product registration is an important step toward enjoying your new
Motorola product. Registering helps us facilitate warranty service,
and permits us to contact you should your product require an
update or other service. Registration is for U.S. residents only and
is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
Registration
WHO Information
129
Wireless: The New Recyclable
Your wireless phone can be recycled. Recycling your phone
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
Recycling
California Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
“Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
There is no special handling required by consumer.
Perchlorate Label
130
Recycling
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
http://recycling.motorola.young-america.com/ index.html
Patent and Trademark Information
MOTOROLA, the Stylized M Logo and all other trademarks
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2008 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
The Bluetooth trademarks are owned by their proprietor and used
by Motorola, Inc. under license.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
Patent and Trademark
Software Copyright Notice
The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in
semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola and third party
software providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or reproduce
the copyrighted software. Accordingly, any copyrighted software
contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to
the extent allowed by law. Furthermore, the purchase of the
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
Patent and Trademark
131
Privacy and Data Security
Motorola understands that privacy and data security are important
to everyone. Because some features of your phone may affect your
privacy or data security, please follow these recommendations to
enhance protection of your information:
• Monitor access: Keep your phone with you and do not
leave it where others may have unmonitored access. Lock
your device’s keypad where this feature is available.
• Keep software up to date: If Motorola or a
software/application vendor releases a patch or software
fix for your phone which updates the device’s security,
install it as soon as possible.
• Erase before recycling: Delete personal information or
data from your phone prior to disposing of it or turning it in
for recycling. For step-by-step instructions on how to
delete all personal information from your device, please
contact your local service provider.
Privacy and Data Security
132
Privacy and Data Security
• Understanding AGPS: In order to comply with
emergency caller location requirements of the FCC, certain
Motorola phones incorporate Assisted Global Positioning
System (AGPS) technology. AGPS technology also can be
used in non-emergency applications to track and monitor a
user’s location, for example, to provide driving directions.
Users who prefer not to permit such tracking and
monitoring should avoid using such applications.
If you have further questions regarding how use of your phone may
impact your privacy or data security, please contact Motorola at
[email protected], or contact your service provider.
Smart Practices While Driving
Drive Safe, Call Smart SM
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas. Go to www.motorola.com/callsmart
for more information.
Your phone lets you communicate by voice and data, almost
anywhere, anytime, wherever wireless service is available and
safe conditions allow. When driving a car, driving is your first
responsibility. If you choose to use your phone while driving,
remember the following tips:
• Get to know your Motorola phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking your
attention off the road.
• When available, use a hands-free
device. If possible, add an additional
layer of convenience to your phone with
one of the many Motorola Original
hands-free accessories available today.
• Position your phone within easy reach. Be able to
access your phone without removing your eyes from the
Driving Safety
•
•
•
•
•
road. If you receive an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
Use your phone to call for help. Dial 911 or other local
emergency number in the case of fire, traffic accident, or
medical emergencies.*
Driving Safety
133
• Use your phone to help others in emergencies. If you
see an auto accident, crime in progress, or other serious
emergency where lives are in danger, call 911 or other
local emergency number, as you would want others to do
for you. *
• Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number.*
* Wherever wireless phone service is available.
134
Driving Safety
index
A
accessories 5, 107
active phone line 15
advanced calling 104
3-way calls 104
call waiting 104
alert
set 100
turn off 45
answer a call 41
B
backlight 110
battery charging 9
battery indicator 15
battery installation 8
C
SDG, see SDG calls
center key 19
center select key 5
clock 110
contacts 105
edit/delete 105
set ringer ID 105
call
answer 41
any key answer 105
end 41
make 41
call alerts
status messages 40
call forward 47
caller ID 46
calls
group, see Group calls
D
datebook 105
create events 105
receive events via PTT
106
setup 101
view reminders 105
dial a phone number 41
dialed calls 45
display 14
Bluetooth
connect 87
send information 88
setting your phone 86
turning on or off 86
index
135
drafts 60
see also text messages,
drafts
E
emergency group calls 34
making 34
receiving 35, 38
emergency number 48
end a call 41
end key 41
export regulations 122
F
GPS 106
approximate location 106
privacy options 106
GPS enabled
emergency calls 49
GPS, see GPS enabled
group calls 25
see also Emergency
Group calls
making 32
off 33
receiving 32
hubs
joining 30
setting up 31
viewing 31
I
international calls 49
isolated site operation 39
L
language 109
low battery message 15
M
features for the vision
impaired 22
frequently asked questions
service and repairs 122
136
G
index
H
handsfree 107
auto answer 108
speaker 107
handsfree speaker 19
hearing aid 22
home screen 14
main menu 16
make a call 41
menu style 110
message indicator 15
MMS 72
modem
using your handset as a
55
my info 108
edit name 108
view my info 108
view options 108, 113
N
navigation key 5, 19
O
one touch PTT 70
optional accessory 5, 107
optional feature 5
optional features 5
P
packet data 15
pc applications 109
personalize 109
phone number 45
power key 11
private calls
answer 43
call alerts 42
make 41
receive a call alert 43
PT Manager 71
PTV features 57, 62
PUK code 13
Q
quick notes
create, edit 60
R
radio frequency 116
received calls 45
recent calls 45
recycling 130
redial 46
ring style indicator 15
ring tones
off 100
setting 100
vibrate 100, 101
ring tones, setting 100
S
safety
radio frequency 116
RF energy interference
118
safety information 116
safety tips 133
SDG calls
call details 55
lists, adding numbers 52
lists, creating 51
lists, deleting 53
lists, remove members 53
lists, save entries 71
make call 53
index
137
starting 54
security 110
Selective Dynamic Group
Calls, see SDG calls
send key 41
signal strength indicator 15
SIM card 10
change SIM PIN 111
enable SIM PIN 110
SIM PIN 11
changing 12
default 12
entering 12
requirement 12
unblocking 13
soft keys 14
speaker 15
Specific Absorption Rate
Data 123
speed dial 50
status messages
in call alerts 40
138
index
store your number 45
T
talkgroup scan 33
talkgroups 25
text 57
text entry 16
alpha method 17
word method 17
text messages 55, 57
creating 59
deleting 60, 61
drafts 60
memory 61
receiving 58
resend messages 60
sending 59
sent messages 60
setting up 57
V
voice mail
receiving 50
setting up 50
voice names 47
voicemail 50
voicemail message indicator
50
W
wallpaper 101
WHO information 129
Y
your phone number 45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement