® GAS RANGE Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301. or visit our website at... www.whirlpool.com Table of Contents ................................................. 2 To the installer: Please leave this instruction book with the unit. To the consumer: Please read and keep this book for future reference. W10017580 TABLE OF CONTENTS RANGE SAFETY .............................................................................2 The Anti-Tip Bracket ....................................................................3 PARTS AND FEATURES................................................................4 COOKTOP USE ..............................................................................5 Cooktop Controls.........................................................................5 Sealed Surface Burners ...............................................................6 Home Canning .............................................................................6 Cookware .....................................................................................6 ELECTRONIC OVEN CONTROLS.................................................7 Display..........................................................................................7 Start or Start/Enter .......................................................................7 Cancel or Off/Cancel....................................................................7 Clock ............................................................................................7 Tones............................................................................................8 Fahrenheit and Celsius.................................................................8 Timer.............................................................................................8 Control Lock.................................................................................8 Oven Temperature Control ..........................................................8 OVEN USE.......................................................................................8 Aluminum Foil...............................................................................9 Positioning Racks and Bakeware ................................................9 Split Oven Rack (on some models)..............................................9 Bakeware......................................................................................9 Meat Thermometer.....................................................................10 Oven Vent ...................................................................................10 Baking and Roasting ..................................................................10 Choice Bake® Function (on some models) ................................10 Broiling........................................................................................11 Warm Hold Feature (on some models) 11 ................................11 Timed Cooking (on some models) .............................................12 Sequence Programming (on some models) ..............................12 Warming Drawer (on some models)...........................................13 RANGE CARE ...............................................................................14 Self-Cleaning Cycle (on some models)......................................14 General Cleaning ........................................................................15 Oven Light (on some models) ....................................................17 Oven Door ..................................................................................17 Storage Drawer ..........................................................................17 Warming Drawer (on some models)...........................................18 TROUBLESHOOTING ..................................................................18 ASSISTANCE OR SERVICE .........................................................19 WARRANTY ..................................................................................20 ® RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. 2 WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch. • Do not use any phone in your building. • Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions. • If you cannot reach your gas supplier, call the fire department. – Installation and service must be performed by a qualified installer, service agency or the gas supplier. The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potential exposure to such substances. WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, carbon monoxide, toluene, and soot. The Anti-Tip Bracket The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-tip bracket fastened down properly. WARNING Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. See the installation instructions for details. Failure to follow these instructions can result in death or serious burns to children and adults. Anti-Tip Bracket Making sure the anti-tip bracket is installed: • Slide range forward. • Look for the anti-tip bracket securely attached to floor. • Slide range back so rear range foot is under anti-tip bracket. Range Foot 3 IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: ■ WARNING: TO REDUCE THE RISK OF TIPPING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET. ■ CAUTION: Do not store items of interest to children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured. ■ Proper Installation – The range, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA70. In Canada, the range must be electrically grounded in accordance with Canadian Electrical Code. Be sure the range is properly installed and grounded by a qualified technician. ■ ■ ■ ■ ■ ■ ■ This range is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug. Disconnect the electrical supply before servicing the appliance. Never Use the Range for Warming or Heating the Room. Injuries may result from the misuse of appliance doors or drawers such as stepping, leaning, or sitting on the doors or drawers. Maintenance – Keep range area clear and free from combustible materials, gasoline, and other flammable vapors and liquids. Storage in or on the Range – Flammable materials should not be stored in an oven or near surface units. Top burner flame size should be adjusted so it does not extend beyond the edge of the cooking utensil. For self-cleaning ranges – ■ Before Self-Cleaning the Oven – Remove broiler pan and other utensils. Wipe off all excessive spillage before initiating the cleaning cycle. SAVE THESE INSTRUCTIONS PARTS AND FEATURES This manual covers several different models. The range you have purchased may have some or all of the parts and features listed. The locations and appearances of the features shown here may not match those of your model. Control Panel A A. Left rear burner control B. Left front burner control (Power™ burner on some models) 4 C B C. Right front burner control D E D. Right rear burner control (ACCUSIMMER® burner on some models) E. Surface burner locator Range G A H B N I J K L C M D O E F A. Oven vent B. Surface cooking area C. Anti-tip bracket D. Oven door hinge E. Model and serial number plate (behind left side of storage drawer) F. Storage drawer (warming drawer on some models) G. Electronic oven control H. Center grate (on some models) I. Surface burner control J. Automatic oven light switch K. Oven rack L. Gasket M. Oven door window N. Self-clean latch O. Gas regulator Parts and Features not shown Oven light Broiler pan and grid Roasting rack Storage drawer liner (on some models) COOKTOP USE Cooktop Controls WARNING To Set: 1. Push in and turn knob counterclockwise to IGNITE. All 4 surface burners will click. Only the burner with the control knob turned to IGNITE will produce a flame. 2. Turn knob to anywhere between HIGH and LOW. Use the following chart as a guide when setting heat levels. Fire Hazard Do not let the burner flame extend beyond the edge of the pan. SETTING RECOMMENDED USE IGNITE ■ Light the burner. HIGH ■ Start food cooking. ■ Bring liquid to a boil. ■ Hold a rapid boil. ■ Quickly brown or sear food. ■ Fry or sauté foods. ■ Cook soups, sauces and gravies. ■ Stew or steam foods. ■ Keep food warm. ■ Simmer. Turn off all controls when not cooking. Failure to follow these instructions can result in death or fire. Electric igniters automatically light the surface burners when control knobs are turned to IGNITE. Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or while the grate is unoccupied. Between HIGH and LOW LOW 5 REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot. NOTE: On self-cleaning models, the cooktop will not operate when the range is in a self-cleaning mode. To Clean: IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers. Power™ Burner (on some models) The left front burner is designed to give ultra-high power when it is fully on. It can be used to rapidly bring liquid to a boil and to cook large quantities of food. ACCUSIMMER® Burner (on some models) Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports. To Clean: IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers. 1. Remove the burner cap from the burner base and clean according to “General Cleaning” section. 2. Clean the gas tube opening with a damp cloth. 3. Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist. The right rear burner has an adjustable heat setting for more precise simmering and low temperature cooking. Power failure In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to IGNITE. After burner lights, turn knob to setting. 4. Replace the burner cap, making sure the alignment pins are properly aligned with the burner cap. Sealed Surface Burners A IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges. B A A. Incorrect B. Correct D B E 5. Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist. Home Canning C A. Burner cap B. Burner base C. Alignment pins D. Igniter E. Gas tube opening Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section. Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Protect it from spillovers by always using a burner cap A B A. 1-1¹⁄₂" (25-38 mm) B. Burner ports 6 When canning for long periods, alternate the use of surface burners between batches. This allows time for the most recently used areas to cool. ■ Center the canner on the grate. ■ Do not place canner on 2 surface burners at the same time. ■ For more information, contact your local agricultural department. Companies that manufacture home canning products can also offer assistance. Cookware IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner. Ideal cookware should have a flat bottom, straight sides and a well-fitting lid, and the material should be of medium-to-heavy thickness. Rough finishes may scratch the cooktop or grates. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the cooktop or grates. Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum. Cookware with nonstick surfaces should not be used under the broiler. Use the following chart as a guide for cookware material characteristics. COOKWARE CHARACTERISTICS Aluminum ■ Heats quickly and evenly. ■ Suitable for all types of cooking. ■ Medium or heavy thickness is best for most cooking tasks. ■ Heats slowly and evenly. ■ Good for browning and frying. ■ Maintains heat for slow cooking. ■ Follow manufacturer’s instructions. ■ Heats slowly, but unevenly. ■ Ideal results on low to medium heat settings. Copper ■ Heats very quickly and evenly. Earthenware ■ Follow manufacturer’s instructions. ■ Use on low heat settings. Cast iron Ceramic or Ceramic glass Style 2 - Electronic Oven Controls (on some models) A K J I B H A. Oven display B. Clock C. Timer/cancel D. Start/enter (control lock) E. Auto clean F. Off/cancel C D E F G G. Temperature/time H. Cook time I. Start time J. Custom broil K. Bake Display Porcelain enamel-onsteel or cast iron ■ See stainless steel or cast iron. Stainless steel ■ Heats quickly, but unevenly. ■ A core or base of aluminum or copper on stainless steel provides even heating. When power is first supplied to the appliance, “PF” or a flashing time will appear on the display. Press CANCEL or OFF/CANCEL to clear “PF” or flashing time from the display. If “PF” or flashing time appears, a power failure has occurred. Press CANCEL or OFF/CANCEL and reset the clock if needed. When the oven is not in use, the display shows the time of day. When performing a timed cook function, the display will show either hours and minutes, or minutes and seconds. Start or Start/Enter ELECTRONIC OVEN CONTROLS Style 1 - Electronic Oven Controls (on some models) B A D E C The START or START/ENTER pad begins any oven function. If not pressed within 5 seconds after pressing a function pad, the “START?” indicator light will flash as a reminder. On some models, “START?” will appear on the display. If not pressed within 5 minutes after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be canceled. Cancel or Off/Cancel The CANCEL or OFF/CANCEL pad stops any function except the Clock, Timer and Control Lock. Clock F G H I J K L M On some models, this is a 12-hour clock that shows a.m. and p.m. To Set: A. Display B. Timer C. Clock D. Auto clean E. Oven light pad (on some models) F. Sequence programming (on some models) G. Oven settings H. Warming drawer (on some models) I. Temperature J. Timed cooking (on some models) K. Hour/minute (on some models) L. Start/control lock M. Cancel Before setting, make sure the oven and Timer are off. 1. Press CLOCK. 2. Depending on your model, press the HR or MIN or TEMP/ TIME “up” or “down” arrow pads to set the time of day, including a.m. or p.m. 3. Press CLOCK or START. 7 Tones Tones are audible signals, indicating the following: One tone ■ Valid pad press ■ Oven is preheated (long tone) ■ Function has been entered ■ Reminder, repeating each minute after the end-of-cycle tones Three tones ■ Invalid pad press Control Lock The Control Lock shuts down the control panel pads to avert unintended use of the oven. When the control is locked, only the ACCUSIMMER®, CLOCK SET, OVEN LIGHT (on some models) and TIMER pads will function. To Lock/Unlock Control: Before locking, make sure the oven and Timer are off. Press and hold START for 5 seconds. A single tone will sound, and “Loc” will appear on the display. Repeat to unlock. “Loc” will disappear from the display. Four tones ■ Oven Temperature Control End of cycle Reminder Tones: Reminder tones may be turned off. On some models, press and hold STOP TIME for 5 seconds. “rEP OFF” or “off” will appear in the display. Repeat to turn reminder tones back on, and “rEP on” or “on” will appear in the display. All Tones: All of the above tones are preset on. All except the end-of-cycle tones can be turned off. To Turn Off/On (on some models): Press and hold START TIME for 5 seconds. A tone will sound, and “Snd OFF” will appear on the display. Repeat to turn tones on, and “Snd on” will appear on the display. On some models, only the loudness of the tones can be adjusted. On other models, the tones cannot be adjusted or turned off. Tone Pitch: The pitch is preset at high, but can be changed to low. On some models, only the loudness of the tones can be adjusted. On other models, the tones cannot be adjusted or turned off. To Change (on some models): Press and hold BAKE for 5 seconds. A tone will sound, and “Snd LO” will appear on the display. Repeat to change, and “Snd Hi” will appear on display. Fahrenheit and Celsius The temperature is preset at Fahrenheit, but can be changed to Celsius on some models. To Change: Press and hold CUSTOM BROIL for 5 seconds. A tone will sound, and “°C” will appear on the display. Repeat to change back to Fahrenheit. To exit mode, press CANCEL or OFF/CANCEL. Timer The Timer can be set in hours or minutes up to 12 hours and 59 minutes, and counts down the set time. The Timer does not start or stop the oven. To Set: 1. Press TIMER SET or TIMER CANCEL*. The timer indicator light will light up on some models. If no action is taken after 5 minutes, the display will return to the time of day mode. 2. Depending on your model, press the HR or MIN or TIME/ TEMP “up” or “down” arrow pads to set the length of time to cook. 3. Press START or TIMER SET. When the set time ends, end-ofcycle tones will sound, then, if enabled, reminder tones will sound every minute on some models. 4. Press TIMER OFF or TIMER CANCEL* anytime to cancel the Timer and reminder tones. Remember, do not press the CANCEL pad because the oven will turn off. To display the time of day for 5 seconds when the timer is counting down, press CLOCK. 8 IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door may cause burner cycling to give incorrect readings. The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius. A minus sign means the oven will be cooler by the displayed amount. The absence of a sign means the oven will be warmer by the displayed amount. Use the following chart as a guide. ADJUSTMENT °F (ADJUSTMENT °C) COOKS FOOD 10°F (5°C) ...a little more 20°F (10°C) ...moderately more 30°F (15°C) ...much more -10°F (-5°C) ...a little less -20°F (-10°C) ...moderately less -30°F (-15°C) ...much less To Adjust Oven Temperature Calibration: 1. Press and hold BAKE for 5 seconds until the oven display shows the current calibration, for example “0°F CAL” or “00.” 2. Press the TEMP or TEMP/TIME “up” or “down” arrow pad(s) to increase or to decrease the temperature in 10°F (5°C) amounts. The adjustment can be set between 30°F (15°C) and -30°F (-15°C). 3. Press START or START/ENTER. OVEN USE Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled. IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and wellventilated room. Aluminum Foil Split Oven Rack IMPORTANT: Do not line the oven bottom with any type of foil, liners or cookware because permanent damage will occur to the oven bottom finish. ■ On those models with bottom vents, do not block or cover the oven bottom vents. (on some models) ■ Do not cover entire rack with foil because air must be able to move freely for best cooking results. ■ To catch spills, place foil on rack below dish. Make sure foil is at least ¹⁄₂" (1.3 cm) larger than the dish and that it is turned up at the edges. Split-Rack with Removable Insert The split-rack with removable insert is a space maximizer. When the two are attached, they make a full rack. The insert can also be removed to provide room for large items such as a turkey and casseroles. Do not place more than 25 lbs (11.3 kg) on the splitrack. The insert can also be used on the counter for a cooling rack. Positioning Racks and Bakeware B A IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom. A. Split-rack B. Removable insert 5 If you would like to purchase a split-oven rack, one may be ordered. See “Assistance or Service” section to order. Ask for Part Number 4396927. 4 3 2 1 6 To Use Racks: RACKS NOTES: ■ Position racks before turning on the oven. ■ Do not move racks with bakeware on them. ■ Make sure racks are level. 1. Place a full rack on position 1 or 2, and the split-rack on position 3 or 4. 2. Place large items on the right side of the full rack. 3. Place deeper, covered dishes on the left side of the full rack. 4. Place shallow dishes on the split-rack. 5. When finished cooking, slowly remove items. A To move a rack, pull it out to the stop position, raise the front edge, then lift out. Use the following illustration and chart as a guide. FOOD RACK POSITION Frozen pies, large roasts, turkeys, angel food cakes 1 or 2 Bundt cakes, most quick breads, yeast breads, casseroles, meats 2 Cookies, biscuits, muffins, cakes, nonfrozen pies 2 or 3 Extra-large items 6 B A. Rear rack section B. Front rack section Bakeware BAKEWARE To cook food evenly, hot air must be able to circulate. Allow 2" (5 cm) of space around bakeware and oven walls. Use the following chart as a guide. NUMBER OF PAN(S) POSITION ON RACK 1 Center of rack. 2 Side by side or slightly staggered. 3 or 4 Opposite corners on each rack. Make sure that no bakeware piece is directly over another. The bakeware material affects cooking results. Follow manufacturer’s recommendations and use the bakeware size recommended in the recipe. Use the following chart as a guide. BAKEWARE/ RESULTS RECOMMENDATIONS Light colored aluminum ■ Light golden crusts ■ ■ Use temperature and time recommended in recipe. Even browning 9 BAKEWARE/ RESULTS RECOMMENDATIONS Dark aluminum and other bakeware with dark, dull and/or nonstick finish ■ Brown, crisp crusts ■ May need to reduce baking temperatures 25°F (15°C). ■ Use suggested baking time. ■ For pies, breads and casseroles, use temperature recommended in recipe. ■ Place rack in center of oven. Insulated cookie sheets or baking pans ■ Little or no bottom browning ■ Place in the bottom third of oven. ■ May need to increase baking time. Stainless steel ■ Light, golden crusts ■ May need to increase baking time. Stoneware/Baking stone ■ Crisp crusts ■ Follow manufacturer’s instructions. Ovenproof glassware, ceramic glass or ceramic ■ Brown, crisp crusts ■ ■ Baking and Roasting ACCUBAKE® DUO SYSTEM® Temperature Management (on some models) The ACCUBAKE® DUO SYSTEM® temperature management technology uses two sensors to maintain even temperatures. The two temperature sensors independently control the bake and broil burners for optimal cooking results. The bake and broil cycle on and off in intervals. This feature is automatically activated when the oven is in use. Before baking and roasting, position racks according to the “Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven preheat conditioning time to end before putting food in unless recommended in the recipe. To Bake or Roast: Uneven browning May need to reduce baking temperatures 25°F (15°C). 1. Press BAKE. 2. Press TEMP or TEMP/TIME “up” or “down” arrow pad to set a temperature other than 350°F (175°C) in 5°F (3°C) amounts. The bake range can be set between 170°F and 500°F (75°C and 260°C). When the oven temperature is greater than 170°F (77°C), no preheat conditioning time will be shown in the display. The preheat conditioning time will not change if the temperature is reset before the countdown time ends. 3. Press START or START/ENTER. The temperature can be changed after this step. The start pad does not need to be pressed again. If baking and roasting while the minute timer is counting down, the set temperature can be seen for 5 seconds by pressing BAKE. 4. Press CANCEL or OFF/CANCEL when finished. Meat Thermometer Preheating ■ After reading the thermometer once, push it into the meat ½" (1.3 cm) more and read again. If the temperature drops, cook the meat or poultry longer. ■ Check all meat, poultry and fish in 2 or 3 different places. After the start pad is pressed, the oven will enter a timed preheat conditioning. “PrE” (on some models) and the countdown time will appear on the display. When the preheat conditioning time ends, a tone will sound and the selected temperature will appear on the display. Preheat temperatures are affected by varying factors such as room temperature and peak energy usage times. It is normal for the temperature showing on the display and the actual oven temperature to differ due to the cycling of the burners. Waiting an additional 10 minutes, after the preheat conditioning time ends, to put food in the oven is suggested when baking foods with leavening ingredients, such as yeast, baking powder, baking soda and eggs. Oven Vent Choice Bake® Function A The CHOICE BAKE® function minimizes the top heat during oven cooking. It is ideal for baking pies, casseroles and breads, and for roasting foods that require longer and slower cook times such as poultry and roasts. Similar to the baking and roasting function, the bake and broil burners cycle on and off at intervals during the CHOICE BAKE® cycle. However, the cycle duration for the broil burner is much shorter during the CHOICE BAKE® cycle. This reduces top browning of foods and gives you more customized control of your baking results. On models without a temperature probe, use a meat thermometer to determine doneness of meat, poultry and fish. The internal temperature, not appearance, should be used to determine doneness. A meat thermometer is not supplied with this appliance. ■ Insert the thermometer into the center of the thickest portion of the meat or inner thigh or breast of poultry. The tip of the thermometer should not touch fat, bone or gristle. A. Oven vent The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Blocking or covering the oven vent will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or burn near the oven vent. 10 (on some models) To Use: 1. Press CHOICE BAKE® function. Press the TEMP “up” or “down” arrow pad to set a temperature other than 350°F (175°C) in 10° amounts. The bake range can be set between 170°F and 500°F (75°C and 260°C). 2. Press START or START/ENTER. The temperature can be changed after this step. Start does not need to be pressed again. 3. Press CANCEL or OFF/CANCEL when finished cooking. Broiling Broiling uses direct radiant heat to cook food. Changing the temperature when Custom Broiling allows more precise control when cooking. The lower the temperature, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry may cook better at lower broiling temperatures. ■ For best results, use a broiler pan and grid (provided on some models). They are designed to drain juices and help avoid spatter and smoke. If your model does not have a broiler pan, one may be ordered. See “Assistance or Service” section to order. Ask for Part Number 4396923. ■ For proper draining, do not cover the grid with foil. The bottom of the pan may be lined with aluminum foil for easier cleaning. ■ Trim excess fat to reduce spattering. Slit the remaining fat on the edges to avoid curling. ■ Pull out oven rack to stop position before turning or removing food. Use tongs to turn food to avoid the loss of juices. Very thin cuts of fish, poultry or meat may not need to be turned. ■ After broiling, remove the pan from the oven when removing the food. Drippings will bake on the pan if left in the heated oven, making cleaning more difficult. Before broiling, position rack according to the Broiling Chart. It is not necessary to preheat the oven before putting food in unless recommended in the recipe. Position food on grid in the broiler pan, then place it in the center of the oven rack. Close the door. To Broil: FOOD RACK POSITION Approximate Time (minutes) SIDE 1 SIDE 2 Steak 1" (2.5 cm) thick medium rare medium well-done 4 4 4 14-15 15-16 18-19 7-8 8-9 9-10 Ground meat patties* ³⁄₄" (2 cm) thick well-done 4 13-14 6-7 Pork chops 1" (2.5 cm) thick 4 21-22 10-11 Ham slice, precooked ¹₂" (1.25 cm) thick 4 8-10 4-5 Frankfurters 4 6-7 3-4 Lamb chops 1" (2.5 cm) thick 4 15-17 8-9 Chicken bone-in pieces boneless breasts 3 4 18-20 12-16 18-20 11-16 4 8-10 4-5 4 15-18 7-9 Fish Fillets ¹₄-¹₂" (0.6-1.25 cm) thick Fish Steaks ³₄-1" (2-2.5 cm) thick *Place up to 9 patties, equally spaced, on broiler grid. Warm Hold Feature (on some models) WARNING 1. Press CUSTOM BROIL. 2. Press START or START/ENTER. 3. Press CANCEL or OFF/CANCEL when finished. Do not let food sit in oven more than one hour before or after cooking. To Custom Broil: Doing so can result in food poisoning or sickness. 1. Press CUSTOM BROIL. 2. Press TEMP “up” or “down” arrow pad to change the temperature in 5°F (5°C) amounts. The broil range can be set between 300°F (150°C) and HI (525°F [275°C]). 3. Press START or START/ENTER. 4. Press CANCEL or OFF/CANCEL when finished. BROILING CHART For best results, place food 3" (7 cm) or more from the broil burner. Times are guidelines only and may need to be adjusted for individual tastes. Recommended rack positions are numbered from the bottom (1) to the top (5). For diagram, see the “Positioning Racks and Bakeware” section. Food Poisoning Hazard IMPORTANT: Food must be at serving temperature before placing it in the warmed oven. Food may be held up to 1 hour; however, breads and casseroles may become too dry if left in the oven during Warm Hold. Warm Hold Feature allows hot cooked foods to stay at serving temperature. It can also be used at the end of a timed cook. To Use Automatic Warm Hold Feature: At the end of a timed cook, either with or without a delayed start, or at the end of a sequence program in which the last step is not the Warm Hold mode, the oven will automatically default to a 1-hour warm hold mode at 170°F (77°C). When the cook time ends or the last step of the sequence is complete, the display will show a warming countdown time. When warming ends, the oven will automatically shut off and “End” will appear on the display. Four tones will sound, and then four 1-second reminder tones will sound every minute thereafter. 11 To Disable Automatic Warm Hold: Press and hold WARM for 5 seconds. “Off” will appear in the 4digit display. Repeat to turn back on. When using the Automatic Warm Hold Feature, cook times may need to be adjusted accordingly so that foods do not become overcooked and dry. To Use Manual Warm Hold Feature: 1. Press WARM. 2. Set the temperature (optional). Press the TEMP “up” or “down” arrow pad to raise or lower the temperature in 5°F (3°C) amounts to set a temperature other than 150°F (66°C). The warm range is 100°F-200°F (38°C-93°C). 3. Press START or START/ENTER. 4. Press CANCEL or OFF/CANCEL when finished. Timed Cooking (on some models) WARNING Food Poisoning Hazard Do not let food sit in oven more than one hour before or after cooking. Doing so can result in food poisoning or sickness. 7. Press START. “DELAY” will appear on the display. When the start time is reached, the oven will automatically turn on. When the stop time is reached (if programmed), the oven will shut off automatically and “End” will appear on the display. End-of-cycle tones will sound, then, if on, reminder tones will sound every minute. 8. Open and close the oven door to clear the display and/or stop reminder tones. Style 2 - Series Electronic Oven Control (see “Electronic Oven Controls” section) To Set a Timed Cook: 1. Press BAKE. The bake indicator light will light up. 2. Set the temperature (optional). 3. Press the TEMP/TIME “up” or “down” arrow pad to enter a temperature other than the one displayed. 4. Press COOK TIME. The cook time oven indicator light will light up. 5. Press TEMP/TIME “up” or “down” arrow pad to enter the length of time to cook. 6. Press START/ENTER. The display will count down the time. When the time ends, the oven will shut off automatically and “End” will appear on the display. 7. Press CANCEL or OFF/CANCEL or open the oven door to clear the display. To Set a Delayed Timed Cook: 1. Press BAKE (optional). 2. Press the TEMP “up” or “down” arrow pads to enter a temperature other than the one displayed. 3. Press STOP TIME. 4. Press the HR and MIN “up” or “down” arrow pads to enter the desired time to end cooking. 5. Press START. The display will count down the time. When the time ends, the oven will shut off automatically and “End” will appear on the display. End-of-cycle tones will sound, then, if enabled, reminder tones will sound every minute. Before setting, make sure the clock is set to the correct time of day. See “Clock” section. 1. Press BAKE. 2. Set the temperature (optional). 3. Press the TEMP/TIME “up” or “down” arrow pad to enter a temperature other than the one displayed. 4. Press COOK TIME. The cook time oven indicator light will light up. 5. Press the TEMP/TIME “up” or “down” arrow pad to enter the length of time to cook. 6. Press START TIME. The start time/delay oven indicator light will light up. 7. Press the TEMP/TIME “up” or “down” arrow pad to enter the time of day to start. 8. Press START/ENTER. When the start time is reached, the oven will automatically turn on. The temperature and/or time settings can be changed anytime after pressing START/ENTER by repeating steps 1-7. When the set cook time ends, the oven will shut off automatically and “End” will appear on the display. 6. Open and close the oven door to clear the display and/or stop reminder tones. 9. Press CANCEL or OFF/CANCEL or open the oven door to clear the display. Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of time, and/or shut off automatically. Delay start should not be used for food such as breads and cakes because they may not bake properly. Style 1 - Series Electronic Controls (see “Electronic Oven Controls” section) To Set a Timed Cook: To Set a Delayed Timed Cook: Before setting, make sure the clock is set to the correct time of day. See “Clock” section. 1. Press desired cook function. 2. Press the TEMP “up” or “down” arrow pads to enter a temperature other than the one displayed. 3. Press START TIME or DELAY START TIME. 4. Press the HR and MIN “up” or “down” arrow pads to enter the time of day to start. 5. Press STOP TIME (optional). 6. If STOP TIME has been pressed, press the HR and MIN “up” or “down” arrow pads to enter the desired time to end cooking. 12 Sequence Programming (on some models) Sequence Programming allows you to program up to 4 cooking functions at one time. Other oven functions, such as the Timer and Warming Drawer, may be used when a sequenced Program is running. All steps of a sequenced program must be programmed with a stop time. If a stop time is not entered for a step in the sequence program, and the FIRST/NEXT STEP pad is pressed, 3 tones will sound prompting you to enter a stop time. Sequence Programming takes precedence over any nonsequenced cooking function. For example, if an untimed Bake function is in process and a sequence program is started, the untimed Bake function will be canceled, and the program sequence will start. Example - Sequence Programming To Program the First Step of the Sequence: 1. Press FIRST/NEXT STEP. “PROGRAM” and “STEP” will appear on the display. A flashing “1” will also appear on the display, indicating that Step 1 is being programmed. 2. Press BAKE, or any other desired cooking function. 3. Press TEMP “up” or “down” arrow pad (if desired) to select a temperature other than the one displayed. 4. Press START TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cooking function to begin. For example, 1:00. If START TIME is not pressed, then the sequence of cooking functions will begin immediately once programming is complete and START is pressed. The display will show either the time of day (if start time was not programmed) or the start time (if same was programmed), but with a flashing colon. “Stop” and “Time” will also appear on the display. 5. Press STOP TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cooking function to stop. For example, 1:15. To Program Next Steps (2 through 4) of the Sequence: 1. Press FIRST/NEXT STEP. “PROGRAM” and “STEP” will appear on the display. The number of the step being programmed will flash. “START” and “TIME” will also appear on the display. 2. Press Choice Bake®, or any other desired cooking function. 3. Press TEMP “up” or “down” arrow pad (if desired) to select a temperature other than the one displayed. 4. Press STOP TIME, then HR and MIN “up” or “down” arrow pads to select a stop time. For example, 1:35. 5. Continue repeating steps 1 through 4 until the desired number of sequences have been set. You can program up to 4 cooking functions within the sequence. 6. Press START to begin sequence. If you choose to press START, your program sequence will begin. Additional steps cannot be added to the sequence once START has been pressed. Press CANCEL at any time to clear program and to stop program. To Review/Modify Programmed Sequence: If program steps are partially or completely programmed, yet the sequence has not been started, the programmed cooking functions can be reviewed. 1. Press REV. STEPS. Step 1 will appear in the display. Subsequent presses of REV. STEPS will cause display of programmed steps in order. “STEP” and “RECALL” will appear on the display. The number of the displayed step will flash. A recalled step will remain lit on the display for 5 minutes if no further action is taken. 2. If fewer than 4 steps have been programmed, press REV. STEPS repeatedly until the last programmed step is displayed, then press FIRST/NEXT STEP if it is desired to program an additional step. While a step is recalled, a cook function pad can be used to change the function, or the TEMP “up” or “down” arrow pad can be used to change the set temperature. START TIME, when used with the HR or MIN “up” or “down” arrow pads, can be used to change, add or delete a delayed start. STOP TIME can be used to change the stop time. Changing the stop time of a step will automatically change the start times and stop times of all subsequent programmed cook functions. 3. After Review/Modification of the programmed sequence is complete, press START to begin sequence. To Modify Sequence Programming: 1. Press UNDO. The last step of the sequence will be canceled, and the step prior to the canceled sequence will show on the display for either review or modification. If the programmed sequence has not been started, see “To Program Next Steps of the Sequence” section to program a step to replace the canceled cook function. 2. Press START. The first step will show on the display, and the program sequence will begin. Changes can be made during a programmed cook function; however, changes cannot be made after a programmed cook function has been completed. If at any time during an active sequenced program FIRST/ NEXT STEP is pressed, 3 tones will sound. Warming Drawer (on some models) WARNING Food Poisoning Hazard Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. The Warming Drawer is ideal for keeping hot cooked foods at serving temperature. It may also be used for warming breads and pastries. Different types of food may be placed in the warming drawer at the same time. For best results, do not hold foods longer than 1 hour. For smaller quantities or heat-sensitive foods, such as eggs, do not hold longer than 30 minutes. Food must be at serving temperature before being placed in the warming drawer. Breads, pastries, and fruit pies may be heated from room temperature on the HI setting. Remove food from plastic bags and place in oven-safe container. Cover foods with a lid or aluminum foil. 13 Do not cover with plastic wrap. Empty serving dishes and ovenproof dishes can be heated while the warming drawer is preheating. Before using the warming drawer, wash the tray that lines the bottom of the drawer with soap and water. See “General Cleaning” section. The warming drawer comes with a liner that helps keep the drawer clean. Do not place food to be warmed directly on warming drawer liner. To Use: 1. Place cooked food(s) in warming drawer. 2. Press W. DRAWER ON. “dr Lo,” “DRAWER” and “START?” will appear on the display. 3. Press START. “DRAWER: and “ON” will appear on the display. 4. Press W. DRAWER OFF when finished. Warming Drawer Settings: The warming drawer is preset for a “Lo” temperature, but can be changed by pressing the TEMP “up” arrow pad. Use the following chart as a guide when selecting a different temperature other than “Lo.” SETTINGS TEMPERATURES “dr Lo” (Low) keeps soft rolls warm 100°F (38°C) “dr 2” (Medium Low) 140°F (60°C) “dr 3” (Medium) 160°F (71°C) “dr 4” (Medium High) 180°F (82°C) “dr HI” (High) keeps french fries crisp and warm 195°F (91°C) FOOD SETTING Ham, Boneless dr 3 Hard Rolls dr LO Lasagna dr 4 Pastries Prepackaged, baked Prepackaged, frozen dr 4 dr LO Pie Single Crust Double Crust dr LO dr LO Pizza dr 4 Potatoes, Baked dr 4 Quiche dr 3 Roast, Boneless dr 4 Roasted Chicken dr 4 Soft Rolls dr LO RANGE CARE Self-Cleaning Cycle (on some models) WARNING Warming Drawer Temperature Chart Different foods require different settings in order to maintain the ideal serving temperature. Use the following chart as a guide. FOOD SETTING Appetizers dr HI Do not touch the oven during the Self-Cleaning cycle. Biscuits dr LO Keep children away from oven during Self-Cleaning cycle. Chicken Boneless, Breaded Nuggets dr HI dr HI Coffee Cake dr LO Dinner Plate (1) Salisbury Steak, Mashed Potatoes, Corn dr HI Fish Pieces Breaded Battered dr HI dr HI French Fries dr HI Gravy dr 4 14 Burn Hazard Failure to follow these instructions can result in burns. IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room. Self-clean the oven before it becomes heavily soiled. Heavy soil results in longer cleaning and more smoke. Keep the kitchen well-ventilated during the Self-Cleaning cycle to help get rid of heat, odors, and smoke. Do not block the oven vent(s) during the Self-Cleaning cycle. Air must be able to move freely. Depending on your model, see “Oven Vent” or “Oven Vents” section. Do not clean, rub, damage or move the oven door gasket. The door gasket is essential for a good seal. Prepare Oven: ■ Remove the broiler pan, grid, cookware and bakeware and, on some models, the temperature probe from the oven. ■ Remove any foil from the oven because it may burn or melt, damaging the oven. ■ Remove oven racks to keep them shiny and easy to slide. See “General Cleaning” section for more information. ■ Hand clean inside door edge and the 1½" (3.8 cm) area around the inside oven cavity frame, being certain not to move or bend the gasket. This area does not get hot enough during self-cleaning to remove soil. Do not let water, cleaner, etc. enter slots on door frame. Use a damp cloth to clean this area. ■ Wipe out any loose soil to reduce smoke and avoid damage. At high temperatures, foods react with porcelain. Staining, etching, pitting or faint white spots can result. This will not affect cooking performance. Prepare Cooktop and Storage Drawer: ■ Remove plastic items from the cooktop because they may melt. ■ Remove all items from the storage drawer. How the Cycle Works To Delay Start Self-Clean (on some models): Before delay starting Self-Clean, make sure the clock is set to the correct time of day. See “Clock” section. Also, make sure the door is closed completely or it will not lock and the cycle will not begin. 1. Press AUTO CLEAN. 2. Press the HR “up” or “down” arrow pad to set a clean time other than 3 hours 30 minutes. The clean time can be set between 3 hours 15 minutes and 5 hours 15 minutes. 3. Press START TIME. 4. Press the HR and MIN “up” or “down” arrows pads to enter the time of day to start. 5. Press START. The time of day is displayed. The door will automatically lock and “LOCKED” and “DELAY” will appear on the display. The door will not unlock until the oven cools. When the start time is reached, the oven will automatically turn on. When the cycle is complete and the oven cools, “End” will appear on the lower oven display and “LOCKED” will disappear. 6. Press any pad or open the oven door to clear the oven display. To Stop Self-Clean anytime: IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and popping sounds. The Self-Cleaning cycle uses very high temperatures, burning soil to a powdery ash. The oven is preset for a 3 hour 30 minute clean cycle, but the time can be changed. Suggested clean times are 2 hours 30 minutes for light soil and between 3 hours 30 minutes and 4 hours 30 minutes for average to heavy soil. Once the oven has completely cooled, remove ash with a damp cloth. Do not wipe down any of the inside surfaces until the oven has completely cooled down. Applying a cool damp cloth to the inner door glass before it has completely cooled could result in the glass breaking. The oven light will not work during the Self-Cleaning cycle. Press CANCEL or OFF. If the oven temperature is too high, “cln,” “TIMED,” “ON,” “cool,” and “LOCKED” will appear on the display (on some models), and the door will remain locked. It will not unlock until the oven cools. To Self-Clean: Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire appliance is cool. These spills may affect the finish. Cleaning Method: ■ Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad: Before self-cleaning, make sure the door is closed completely or it will not lock and the cycle will not begin. 1. Press AUTO CLEAN. 2. Press the HR and MIN “up” or “down” arrow pads, or the TIME/TEMP “up” or “down” arrow pad (depending on your model) to set a clean time other than 3 hours 30 minutes. On models with Style 1 series electronic oven controls (see “Electronic Oven Controls” section), the oven can be set to a clean time between 3 hours 15 minutes and 5 hours 15 minutes. On models with Style 2 series electronic oven controls (see “Electronic Oven Controls” section), the oven can be set to a clean time between 2 hours 30 minutes and 4 hours 30 minutes. 3. Press START/ENTER. The oven door will automatically lock. “LOCKED” will appear on the display (on some models), and on other models, the ON, HEAT and DOOR LOCKED indicator lights will light up. The door will not unlock until the oven cools. When the cycle is complete and the oven cools, “End” will appear on the oven display and “LOCKED” shown on the display of some models will disappear. The indicator lights on other models will go off. 4. Press CANCEL or OFF/CANCEL, or open the oven door to clear the oven display. General Cleaning IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products. Soap, water and a soft cloth or sponge are suggested first unless otherwise noted. EXTERIOR PORCELAIN ENAMEL SURFACES (on some models) Gently clean around the model and serial number plate because scrubbing may remove numbers. ■ All-Purpose Appliance Cleaner Part Number 31662 (not included): See “Assistance or Service” section to order. STAINLESS STEEL (on some models) To avoid damage to stainless steel surfaces, do not use soapfilled scouring pads, abrasive cleaners, Cooktop Polishing Creme, steel-wool pads, gritty washcloths or some paper towels. Rub in direction of grain to avoid damaging. Cleaning Method: ■ Stainless Steel Cleaner & Polish Part Number 31464 (not included): See “Assistance or Service” section to order. ■ Liquid detergent or all-purpose cleaner: Rinse with clean water and dry with soft, lint-free cloth. ■ Vinegar for hard water spots. 15 METALLIC PAINT (on some models) Do not use abrasive cleaners, cleaners with bleach, rust removers, ammonia or sodium hydroxide (lye) because paint surface may stain. COOKTOP CONTROLS Do not use steel wool, abrasive cleansers or oven cleaner. Do not soak knobs. When replacing knobs, make sure knobs are in the Off position. On some models, do not remove seals under knobs. Cleaning Method: ■ Soap and water or dishwasher: OVEN CAVITY Do not use oven cleaners. Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain and staining, etching, pitting or faint white spots can result. Cleaning Method: ■ Self-Cleaning cycle: See “Self-Cleaning Cycle” first. OVEN RACKS AND ROASTING RACKS Cleaning Method: ■ Self-Cleaning cycle: See “Self-Cleaning Cycle” first. Remove racks or they will discolor and become harder to slide. If this happens, a light coating of vegetable oil applied to the rack guides will help them slide. Pull knobs straight away from control panel to remove. CONTROL PANEL ■ Do not use abrasive cleaners, steel-wool pads, gritty washcloths or some paper towels. Damage may occur. Cleaning Method: ■ Glass cleaner and soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on panel. All-Purpose Appliance Cleaner Part Number 31662 (not included): See “Assistance or Service” section to order. ■ BROILER PAN AND GRID (on some models) Do not clean in the Self-Cleaning cycle. Cleaning Method: ■ Mildly abrasive cleanser: Scrub with wet scouring pad. ■ ■ Clean as soon as cooktop, grates and caps are cool. Dishwasher (grates only, not caps): ■ Use the most aggressive cycle. Cooked-on soils should be soaked or scrubbed before going into a dishwasher. Gas Grate and Drip Pan Cleaner Part Number 31617: See “Assistance or Service” section to order. ■ Solution of ¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water: Soak for 20 minutes, then scrub with scouring or steel-wool pad. PORCELAIN-COATED GRATES AND CAPS Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the cooktop, grates and caps are cool. These spills may affect the finish. To avoid chipping, do not bang grates and caps against each other or hard surfaces such as cast iron cookware. Do not reassemble caps on burners while wet. Do not clean in the Self-Cleaning cycle. Cleaning Method: ■ Nonabrasive plastic scrubbing pad and mildly abrasive cleanser: Steel-wool pad Oven cleaner: Follow product label instructions. Porcelain enamel only, not chrome ■ Dishwasher STORAGE DRAWER (on some models) Make sure drawer is cool and empty before cleaning. For more information, see “Storage Drawer” section. Cleaning Method: ■ Mild detergent Drawer Liner (on some models) Remove all stored items from drawer and lift out drawer liner. ■ Clean with mild detergent. ■ All-Purpose Appliance Cleaner Part Number 31662 (not included): See “Assistance or Service” section to order. SURFACE BURNERS WARMING DRAWER and TRAY (on some models) See “Sealed Surface Burners” section. OVEN DOOR EXTERIOR Cleaning Method: ■ Glass cleaner and a soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on panel. ■ 16 All-Purpose Appliance Cleaner Part Number 31662 (not included): See “Assistance or Service” section to order. Make sure drawer is cool and remove tray. Cleaning Method: ■ Mild detergent (for both) ■ All-Purpose Appliance Cleaner Part Number 31662 (not included): See “Assistance or Service” section to order. To Replace: Oven Light 1. Insert both hanger arms into the door. (on some models) The oven light is a standard 40-watt appliance bulb. It will come on when the oven door is open. It will not work during the SelfCleaning cycle (on some models). On some models, when the oven door is closed, press OVEN LIGHT to turn it on or off. Before replacing, make sure the oven and cooktop are cool and the control knobs are off. To Replace: 1. Unplug range or disconnect power. 2. Turn the glass bulb cover in the back of the oven counterclockwise to remove. 2. Open the oven door. You should hear a “click” as the door is set into place. 3. Move the hinge levers back to the locked position. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures. Storage Drawer 3. Turn bulb counterclockwise to remove from socket. 4. Replace bulb and bulb cover by turning clockwise. 5. Plug in range or reconnect power. Oven Door The storage drawer can be removed. Before removing, make sure drawer is cool and empty. To Remove: 1. Pull the storage drawer straight back past the drawer stop notch and the end of the side rails. For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy. To Remove: 1. Open oven door all the way. 2. Flip up the hinge latch on each side. A B A. Drawer stop notch B. End of side rail 2. Lift up the back of the drawer and pull the drawer out. To Replace: 3. Close the oven door as far as it will shut. 4. Lift the oven door while holding both sides. Continue to push the oven door closed and pull it away from the oven door frame. 1. Lift up the back of the drawer and place it inside the range in its fully forward position. 2. Lift up the front of the drawer to a level position. 3. Slowly push the drawer into the range until the drawer side rails engage with the gap in the drawer glides. A A. Engage drawer glide. 4. Once the drawer is fully engaged on both sides, slide the drawer back into the closed position. NOTE: When you are removing and replacing the storage drawer, a slight push may be needed to move the drawer stop notch past the drawer glides. 17 3. Press the tab down on the right side, and lift tab up on the left side at the same time, then pull drawer out another inch. Warming Drawer (on some models) Remove all items from inside the warming drawer, and allow the unit to cool completely before attempting to remove the drawer. To Remove: 1. Open drawer to its fully open position. 2. Locate the black triangle-shaped tabs on both sides of the drawer. 4. Holding the drawer by its sides, slowly pull it all the way out. To Replace: 1. Align the drawer glides with the receiving guides. A A. Tab 2. Push drawer in all the way. 3. Gently open and close the drawer to ensure it is seated properly on the slides. TROUBLESHOOTING Try the solutions suggested here first in order to avoid the cost of an unnecessary service call. Nothing will operate ■ Is the power supply cord unplugged? Plug into a grounded 3 prong outlet. ■ Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. Surface burners will not operate Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines. ■ Excessive heat around cookware on cooktop ■ Cooktop cooking results not what expected ■ Is the proper cookware being used? See “Cookware” section. ■ Is the control knob set to the proper heat level? See “Cooktop Controls” section. ■ Is the appliance level? Level the appliance. See the Installation Instructions. Is the control knob set correctly? Push in knob before turning to a setting. ■ Are the burner ports clogged? See “Sealed Surface Burners” section. ■ Surface burner flames are uneven, yellow and/or noisy Are the burner ports clogged? See “Sealed Surface Burners” section. ■ ■ On models with caps, are the burner caps positioned properly? See “Sealed Surface Burners” section. ■ Is propane gas being used? The appliance may have been converted improperly. Contact a service technician or see “Assistance or Service” section. Oven will not operate ■ Is this the first time the oven has been used? Turn on any one of the surface burner knobs to release air from the gas lines. ■ Is the electronic oven control set correctly? See “Electronic Oven Controls” section. ■ On some models, is the Control Lock set? See “Control Lock” section. Oven burner flames are yellow or noisy ■ 18 Is the burner wet? Let it dry. Is propane gas being used? The appliance may have been converted improperly. Contact a service technician or see “Assistance or Service” section. Cooling fan runs during baking, broiling or cleaning Surface burner makes popping noises ■ Is the cookware the proper size? Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area. ■ It is normal for the fan to automatically run while the oven is in use to cool the electronic control. Oven temperature too high or too low ■ Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section. Oven cooking results not what expected ■ Is the appliance level? Level the appliance. See the Installation Instructions. ■ Is the proper temperature set? Double-check the recipe in a reliable cookbook. ■ Is the proper oven temperature calibration set? See “Oven Temperature Control” section. ■ Was the oven preheated? See “Baking and Roasting” section. ■ Is the proper bakeware being used? See “Bakeware” section. ■ Are the racks positioned properly? See “Positioning Racks and Bakeware” section. ■ Is there proper air circulation around bakeware? See “Positioning Racks and Bakeware” section. ■ Is the batter evenly distributed in the pan? Make sure batter is level in the pan. ■ Is the proper length of time being used? Adjust cooking time. ■ Has the oven door been opened while cooking? Oven peeking releases oven heat and can result in longer cooking times. ■ Are baked items too brown on the bottom? Move rack to higher position in the oven. ■ Are pie crust edges browning early? Use aluminum foil to cover the edge of the crust and/or reduce baking temperature. Display shows messages ■ ■ Is the display showing “PF” or a flashing time? There has been a power failure. Clear the display. See “Display(s)” section. On some models, reset the clock, if needed. See “Clock” section. Is the display showing a letter followed by a number? Depending on your model, press OFF/CANCEL, OFF or CANCEL/OFF to clear the display. See “Display(s)” section. If it reappears, call for service. See “Assistance or Service” section. Self-Cleaning cycle will not operate ■ Is the oven door open? Close the oven door all the way. ■ Has the function been entered? See “Self-Cleaning Cycle” section. ■ On some models, has a delay start Self-Clean cycle been set? See “Self-Cleaning Cycle” section. ■ Has a delay start been set? See “Timed Cooking” section. ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request. If you need replacement parts If you need to order replacement parts, we recommend that you use only FSP® replacement parts. FSP® replacement parts will fit right and work right because they are made with the same precision used to build every new WHIRLPOOL® appliance. To locate FSP® replacement parts in your area, call us or your nearest Whirlpool designated service center. Call the Whirlpool Customer eXperience Center toll free: 1-800-253-1301. To locate the Whirlpool designated service company in your area, you can also look in your telephone directory Yellow Pages. For further assistance If you need further assistance, you can write to Whirlpool Corporation with any questions or concerns at: Whirlpool Brand Home Appliances Customer eXperience Center 553 Benson Road Benton Harbor, MI 49022-2692 Please include a daytime phone number in your correspondence. Accessories U.S.A. ■ Features and specifications on our full line of appliances. To order accessories, call the Whirlpool Customer eXperience Center toll free at 1-800-442-9991 and follow the menu prompts. Or visit our website at www.whirlpool.com and click on “Buy Accessories Online.” ■ Installation information. Stainless Steel Cleaner & Polish ■ Use and maintenance procedures. ■ Accessory and repair parts sales. (stainless steel models) Order Part Number 31462 ■ Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.). ■ Referrals to local dealers, repair parts distributors and service companies. Whirlpool designated service technicians are trained to fulfill the product warranty and provide afterwarranty service, anywhere in the United States. Our consultants provide assistance with: All-Purpose Appliance Cleaner Order Part Number 31662 Gas Grate and Drip Pan Cleaner Order Part Number 31617 19 WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY ONE YEAR LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for FSP® replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company. ITEMS WHIRLPOOL WILL NOT PAY FOR 1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair house fuses or to correct house wiring or plumbing. 2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty coverage. 3. Repairs when your major appliance is used for other than normal, single-family household use. 4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by Whirlpool. 5. Any food loss due to refrigerator or freezer product failures. 6. Replacement parts or repair labor costs for units operated outside the United States or Canada. 7. Pickup and delivery. This major appliance is designed to be repaired in the home. 8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance. 9. Expenses for travel and transportation for product service in remote locations. 10. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions. DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if another warranty applies. If you need service, first see the “Troubleshooting” section of the Use & Care Guide. After checking “Troubleshooting,” additional help can be found by checking the “Assistance or Service” section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada, 8/05 call 1-800-807-6777. Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service. Write down the following information about your major appliance to better help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can find this information on the model and serial number label located on the product. Dealer name____________________________________________________ Address ________________________________________________________ Phone number __________________________________________________ Model number __________________________________________________ Serial number __________________________________________________ Purchase date __________________________________________________ W10017580 © 2006 Whirlpool Corporation. All rights reserved. ® Registered Trademark/TM Trademark of Whirlpool, U.S.A. 1/06 Printed in U.S.A.