SCR120 - Emerson Radio

SCR120 - Emerson Radio
Clock Radio
with Dual Alarm
Auto Time Setting System
(U.S. Patent No. 6,567,344)
OWNER’S MANUAL
SCR120
Visit our web site at www.emersonscott.com
SCR120_080206.p65
23
2/8/2006, 15:56
CAUT I ON
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
C AU T I O N
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(ser vi ci ng) instr ucti ons in
the liter ature accompanying the appl iance.
The Caution Marking maybe located at the bottom enclosure of the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
8.) Only use attachments / accessories specified by the manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids
such as vases shall be placed on the apparatus.
12.) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13.) Do not overload wall outlet. Use only power source as indicated.
14.) Use replacement parts as specified by the manufacturer.
15.) The product may be mounted to a wall only if recommended by the manufacturer.
16.) Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks.
1
SCR120_080206.p65
1
2/8/2006, 15:56
Congratulations!
And thank you for purchasing the E-Z Set Clock Radio from H. H. SCOTT.
E-Z Set is the world’s first and only LED clock radio that will automatically set itself
to the correct ‘Year’, ‘Month’, ‘Date’, ‘Day’, and ‘Time’as soon as you plug it in. The
only thing you have to do is tell the E-Z Set what time zone you are in, and the built
in computer does everything else for you immediately. And not only the first time,
but every time the power is interrupted as well.
We all know how annoying it is to wake up in the morning and see the dreaded
flashing “12:00” display on our clocks or clock radios. But with your E-Z Set Clock
Radio the dreaded flashing “12:00” display is a thing of the past.
The E-Z Set resets itself as soon as the power is restored and gets you up on time,
every time.
And if that isn’t enough, the E-Z Set computer also knows when Daylight Saving
Time begins and ends and it will adjust itself for those changes automatically through
the year 2099! Leap Years too! And best of all, the long life lithium battery backup
battery is already installed in your radio. You don’t have to remember to put a new
9-volt battery in your radio every 6 months. Under normal circumstances the lithium
battery can last for up to 5 years, and when it does need to be changed, a low
battery indicator will come on to let you know. The CR2430 lithium battery is available
almost anywhere that batteries are sold and it costs about the same as a normal
9-volt battery.
The E-Z Set also gives you dual alarms that can be set to go off on weekdays only,
weekends only, or all 7 days. You can set one alarm to wake you up to buzzer
Monday through Friday when you have to get up early, and use the second alarm
to wake you up to soft music on Saturday and Sunday when you can sleep in.
Someday all clocks and clock radios may be this smart. But today the technology
is only available from H. H. SCOTT. We’re sure you’ll be happy and amazed by
your E-Z Set Clock Radio, and that it will give you many years of enjoyment and
dependable service.
Once again, all of us at H. H. SCOTT thank you for your purchase.
2
SCR120_080206.p65
2
2/8/2006, 15:56
IMPORTANT NOTES
• Avoid installing this unit in places
• Operate controls and switches as
exposed to direct sunlight or close
described in the manual.
to heat radiating appliances such as
• Before turning on the power, make
electric heaters, on top of other
certain that the power cord is
stereo equipment that radiates too
properly installed.
m u c h h e a t , p l ac e s l ac k i n g
• When moving the set, be sure to
ventilation or dusty areas, places
first disconnect the AC power cord.
subject to constant vibration and/or
humid or moist areas.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
3
SCR120_080206.p65
3
2/8/2006, 15:56
PREPARATION FOR USE
UNPACKING AND SET UP
• Remove the radio from the carton and remove all packing material from the
radio. We suggest that you save the packing material, if possible, in the unlikely
event that your radio ever needs to be returned for service. The original carton
and packing material is the only safe way to pack your radio to protect it from
damage in transit.
• Remove any descriptive labels or stickers on the front or top of the cabinet.
Do not remove any labels or stickers from the back or bottom of the cabinet.
• Note the serial number on the bottom of your radio and write this number in the
space provided on Page 20 of this manual.
• Place your radio on a level surface such as a table, desk or shelf, convenient
to an AC outlet, out of direct sunlight, and away from sources of excess heat,
dirt, dust, moisture, humidity, or vibration.
• Unwind the AC power cord and extend it to its full length. The FM antenna is
built in to this cord. It must be fully extended to provide the best FM reception.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
4
SCR120_080206.p65
4
2/8/2006, 15:56
POWER SOURCE
This radio is designed to operate on normal 120V 60Hz AC power only. Do not
attempt to operate the radio on any other power source. You could cause damage
to the radio that is not covered by your warranty.
This radio should be connected to an AC outlet that is always ‘live’. Do not connect
it to an outlet that is controlled by a wall switch. When the power to the radio is
interrupted, the built in lithium battery takes over to maintain the time and alarm
settings. To maximize the life of the lithium battery keep the radio connected to a
‘live’AC outlet at all times.
You will note that this system is equipped with a polarized AC power plug having
one blade wider than the other. This is a safety feature. If this plug does not fit into
your existing AC outlet, do not try to defeat this safety feature by filing the wide
blade to make it fit into your outlet. If this plug will not fit into your outlet, you
probably have an out-dated non-polarized AC outlet. You should have your outlet
changed by a qualified licensed electrician.
AC Outlet
AC Plug
5
SCR120_080206.p65
5
2/8/2006, 15:56
LOCATION OF CONTROLS AND INDICATORS
6
SCR120_080206.p65
6
2/8/2006, 15:56
Top Panel
1.) ALARM MODE Button.
(Weekdays/Weekends/Everyday alarm)
2.) TIME Setting Button.
3.) DATE Setting Button.
4.) ALARM 1 Setting Button.
5.) ALARM 2 Setting Button.
6.) TIME ZONE Button.
7.) UP Button.
8.) DOWN Button.
9.) SLEEP Timer Button.
10.)
RADIO ON/OFF Button.
11.) SNOOZE (SLEEP OFF) Button.
Left Side Panel
12.) ALARM 1 Selector Switch.
(RAD/BUZ/OFF)
13.) ALARM 2 Selector Switch.
(RAD/BUZ/OFF)
14.) Display DIMMER Switch (HI/LOW)
Right Side Panel
15.) VOL (Volume) Control.
16.) Band (AM/FM) Selector Switch .
17.) TUN (Tuning) Control.
Front Panel
18.) AM Indicator.
19.) AL (Alarm) 1 ‘On’Indicator.
20.) Time Display.
21.) AL (Alarm) 2 ‘On’Indicator.
22.) MONTH/DATE Display.
23.) BATT. LOW Indicator.
24.) Day Indicators.
25.) Tuning Dial.
Back Panel
26.) Back Up Battery Compartment.
27.) AC Power Cord.
7
SCR120_080206.p65
7
2/8/2006, 15:56
OPERATING INSTRUCTIONS
SETTING THE TIME, THE FIRST TIME
IMPORTANT: The first time you connect your new E-Z Set clock radio to the AC
outlet the internal computer will automatically set the time correctly for the
Eastern Time Zone, which is the initial default setting.
The display will scan for a few
seconds and then set the correct
Month, Date, Day and Time in the
Eastern zone.
If you live in the Eastern Time zone, there’s nothing else to do. Your clock is set
correctly and running.
If you do not live in the Eastern Time zone you must change the default zone
display to your own zone. You only do this one time and the E-Z Set will remember
the new default zone setting and will always return to that setting after a power
interruption.
There are 7 time zones programmed into your E-Z Set clock radio as follows:
Zone 01
—
Atlantic Time
Zone 02
—
Eastern Time (Default Setting)
Zone 03
—
Central Time
Zone 04
—
Mountain Time
Zone 05
—
Pacific Time
Zone 06
—
Yukon Time
Zone 07
—
Hawaiian Time
To change the default time zone display, depress the TIME ZONE button.
The word “ZONE” appears in the
main display, and the number “2” will
appear on the s m all display,
indicating that the default zone is
Zone 2, Eastern Time.
Hold the TIME ZONE button and then press either the UP or DOWN buttons until
your own time zone appears on the display, then release the buttons. The clock
display will change to the correct time in the time zone you selected. The clock will
always return to the correct time in the zone you selected after every power
interruption. If you move to a different time zone, simply change the default zone
display to the new zone and the E-Z Set will remember that setting for you.
8
SCR120_080206.p65
8
2/8/2006, 15:56
DATE DISPLAY
The correct month and date appear in the small display. The month and date
are expressed numerically in the MM/DD format.
For example, May 21st will be displayed as (5. 21). This display adjusts
automatically for months of different lengths.
For example, at midnight on February 28th (2. 28), the display will automatically
change to March 1st (3. 1), unless it is a Leap Year, in which case the display
will change to February 29th (2. 29).
YEAR DISPLAY
To see the correct year, depress the TIME and DATE buttons together. The
small display changes from ‘month/date’ to ‘year’.
When you release the TIME and DATE buttons the small display returns to
month and date.
DAYLIGHT SAVING AND LEAP YEAR ADJUSTMENTS
All Daylight Saving and Leap Year adjustments are made automatically by the
E-Z Set internal computer as follows:
• Start of Daylight Saving Time:
At “2:00 AM” on the first Sunday in April, the clock will automatically advance
to “3:00 AM”.
• End of Daylight Saving Time:
At “3:00 AM” on the last Sunday in October, the clock will automatically
reset to “2:00 AM”.
• Leap Year:
At “12:00 Midnight” on February 28th, the calendar display will change
to “2. 29”.
9
SCR120_080206.p65
9
2/8/2006, 15:56
IMPORTANT DAYLIGHT SAVING TIME INFORMATION
As a result of the new Energy Bill that was passed by Congress in August of 2005,
Daylight Saving Time is scheduled to be extended starting in 2007. This E-Z Set
Clock Radio has been programmed to adjust itself automatically for Daylight Saving
Time through 2006. We have also provided instructions to allow you to change
the Daylight Saving starting and ending dates for 2007 and beyond. You only need
to make this adjustment once and then this clock radio will automatically adjust
itself for the new Daylight Saving Time through the year 2099.
The instructions for adjusting the Daylight Saving starting and ending dates will be
found on a separate addendum sheet included with this Instruction Manual.
10
SCR120_080206.p65
10
2/8/2006, 15:56
MANUAL TIME ADJUSTMENTS
Some people like to set their clocks 5 to 10 minutes fast to make sure that they will
always be on time. Even though the E-Z Set sets the time by itself, you still have
the option of adjusting the time manually if you wish.
To manually adjust the time display depress and hold the TIME button, and press
either the UP or DOWN buttons to adjust the time display ahead or back as desired.
Each press of the UP or DOWN buttons will change the display by one minute.
If you hold the UP or DOWN buttons the display will continue to change. The display
will change slowly at first, one minute at a time. But if you continue holding the UP
or DOWN buttons the display will change rapidly.
Note: If you manually adjust the time, your new setting is entered into the
E-Z Set memory. If the power is interrupted, the display will return to your new
setting, not the original setting, when the power is restored.
ADJUSTING THE WAKE UP TIMES
Your E-Z Set clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different times, or
you may use one alarm for weekdays and the other for weekend wake up times.
The procedure for adjusting the wake up time is the same for both Alarm 1 and
Alarm 2.
1.) Depress and hold either the ALARM 1 or ALARM 2 setting button. The main
display will change from the correct time to the Alarm 1 or Alarm 2 wake up
time.
2.) While holding the ALARM 1 or ALARM 2 setting button, depress either the UP
or DOWN button to move the display ahead or back to your desired wake up
time.
3.) When the desired wake up time appears on the display, release the UP or
DOWN buttons.
Note: Be sure that you have set the wake up time correctly by observing
the AM indicator. If the AM indicator is ‘On’the wake up time is “AM”. If the
AM indicator is ‘Off’, the wake up time is “PM”.
4.) When the desired wake up time (AM or PM) appears on the display, release
the ALARM 1 or ALARM 2 setting buttons.
11
SCR120_080206.p65
11
2/8/2006, 15:56
SELECTING THE ALARM MODE
Your E-Z Set clock radio allows you to select from among three different alarm
operation modes for either alarm. The alarm modes are:
• Weekdays only - the alarm will only turn on Monday through Friday;
• Weekends only - the alarm will only turn on Saturday and Sunday;
• Everyday - the alarm will turn on all 7 days.
To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button.
The display will show the Alarm 1 wake up time and the day of the week indicators
will show you which alarm mode is selected.
• If all 7 indicators are ‘On’, the Everyday mode is selected.
• If only the Monday through Friday indicators are ‘On’, the
Weekdays only mode is selected.
• If only the Saturday and Sunday indicators are ‘On’, the
Weekends only mode is selected.
To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button
and press the ALARM MODE button until the day indicators show the desired
mode setting, Weekdays only, Weekends only, or Everyday operation. Release
the ALARM MODE and ALARM 1 setting buttons and the display will return to the
correct time.
Follow the same procedure to select the desired Alarm Mode for Alarm 2 if
necessary.
CHECKING THE WAKE UP TIMES AND ALARM MODE
Whenever you want to check the wake up time or the alarm mode settings, simply
press either the ALARM 1 or ALARM 2 setting buttons. The display will change
from correct time to wake up time and the day indicators will show you which alarm
mode is currently selected.
Release the ALARM 1 or ALARM 2 setting buttons to return to correct time.
12
SCR120_080206.p65
12
2/8/2006, 15:56
LISTENING TO THE RADIO
1.) Set the Band selector to the desired band, AM or FM.
2.) Set the VOL (Volume) control to a low setting.
3.) Press the RADIO ON/OFF button to turn the radio ‘On’.
4.) Select your desired station with the TUN (Tuning) control.
5.) Adjust the VOL control to the desired setting.
6.) When you are finished listening, press the RADIO ON/OFF button to turn the
radio ‘Off’.
ANTENNA INFORMATION
AM -The AM bar antenna is inside the cabinet. If AM reception is weak, change the
position of cabinet until the internal antenna picks up the strongest signal.
FM - The FM antenna is built in to the AC power cord. If FM reception is weak try
varying the position and direction of the power cord until you find the strongest
signal.
13
SCR120_080206.p65
13
2/8/2006, 15:56
WAKE TO RADIO
1.) Turn the radio ‘On’and select the band, station, and volume level that you wish
to hear when the alarm comes on, then turn the radio ‘Off’again.
2.) Reconfirm the wake up time and alarm mode settings for the alarm you are
using, Alarm 1, Alarm 2, or both alarms.
3.) Set the ALARM selector switch for one or both alarms to the RAD (Radio)
position. The appropriate AL 1 and/or AL 2 indicators will light up to confirm
that the alarms are set.
4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and
then shut off automatically.
5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2
button, or press the RADIO ON/OFF button. The radio will stop but the alarm
remains set and will turn the radio on again at the same time on the following
day (depending on the Alarm Mode setting).
6.) If you do not want the alarm to turn the radio on the following day, set the
appropriate ALARM selector to the “OFF” position.
14
SCR120_080206.p65
14
2/8/2006, 15:56
WAKE TO BUZZER
Note: Alarm 1 and Alarm 2 have different buzzer sounds.
• Alarm 1 is a “Single beep” sound.
• Alarm 2 is a “Double beep” sound.
You will be able to tell which alarm is going off by the sound that it makes.
1.) Reconfirm the wake up time and alarm mode settings for the alarm you are
using, Alarm 1, Alarm 2, or both alarms.
2.) Set the Alarm selector switch for one or both alarms to the BUZ (Buzzer)
position. The appropriate AL 1 and/or AL 2 indicators will light up to confirm
that the alarms are set.
3.) At the selected wake up time the buzzer will sound. It will continue for one hour
and then shut off automatically.
4.) To stop the buzzer sooner, press either the appropriate ALARM 1 or ALARM 2
button. The buzzer will stop but the alarm remains set and will turn the buzzer
on again at the same time on the following day (depending on the Alarm Mode
setting). To stop the buzzer and turn on the radio immediately, press the
RADIO ON/OFF button instead of the ALARM 1 or ALARM 2 button.
5.) If you do not want the alarm to turn the buzzer on the following day, set the
appropriate ALARM selector to the “OFF” position.
RADIO AND BUZZER OPERATION
You may also set one alarm for “Wake To Radio” and the other for “Wake To Buzzer”.
Just set the ALARM 1 and ALARM 2 selector switches to the desired positions.
SNOOZE ALARM
After the radio or buzzer alarm sounds in the morning you may press the SNOOZE
Bar for a few more minutes sleep. The appropriate AL 1 or AL 2 indicator will
‘flash’.
The alarm will stop for approximately 9 minutes and then turn on again. You may
repeat the Snooze operation up to seven times if desired, but after the seventh
time the alarm will not turn on again.
15
SCR120_080206.p65
15
2/8/2006, 15:56
SLEEP TO MUSIC TIMER
You can program the sleep timer to play the radio for up to 90 minutes and then
shut off automatically.
1.) Press the SLEEP button.
The small display will show “10”
and the radio will begin to play.
After 10 minutes the radio will
shut off automatically.
Each time you press the SLEEP button the sleep timer will start at 10 minutes.
This is the sleep timer default setting.
2.) To increase or decrease the amount of time that the radio will play before
shutting off, hold the SLEEP button and press either the UP or DOWN button
to change the display to the desired sleep time, up to a maximum of 90 minutes
or a minimum of 2 minutes.
Note: When you change the sleep timer from the 10 minute default setting
to a different setting, the new setting becomes the default setting. Whenever
you activate the sleep timer it will begin with your new default setting and
count down to zero from that point.
3.) To cancel the sleep timer before it counts down to “00” and shut the radio ‘Off’
immediately, press the SNOOZE Bar.
IMPORTANT: Remember that the station and volume settings you choose for
the SLEEP TO MUSIC operation are the same settings you will hear if you set
the alarm for WAKE TO RADIO the following morning.
DIMMER CONTROL
The DIMMER control was set to the HI (High) position at our factory. If you find the
clock display is too bright in a darkened room, set the Dimmer control to the ‘LOW’
position.
16
SCR120_080206.p65
16
2/8/2006, 15:56
CHANGING THE LITHIUM BATTERY
Like all batteries, eventually the built in lithium battery will need to be replaced. A
number of factors, such as, the length of time between the date the radio was
manufactured and the date you plugged it in for the first time determine the amount
of time before replacement. During this initial storage period, the lithium battery is
supplying power to the E-Z Set computer memory. Once you plug the radio in,
your household outlet supplies the power, and the battery is not being used. A
fresh lithium battery can supply power to the E-Z Set computer for at least 3 years
even if it is never connected to an AC power supply. If your radio was connected to
your AC supply within a few months after it was manufactured, and you experience
only the normal, nuisance type, short duration power interruptions, your battery
may last for up to 5 years or even longer.
When the battery power drops below a certain level, the BATT. LOW indicator will
‘flash’. When you see this indicator, you should change the battery as soon as it is
convenient for you to do so. To change the battery proceed as follows:
1.) Purchase a replacement 3V lithium battery wherever batteries are sold. The
battery type is CR2430 or equivalent.
2.) Remove the battery from its package so it is ready to install.
IMPORTANT: Leave the radio power cord connected to your AC outlet.
This will provide power to the E-Z Set computer memory while the original
lithium battery is removed.
3.) Use a small screwdriver to remove the two small screws securing the battery
holder on the back cabinet.
BE CAREFUL NOT TO LOSE THESE SMALL SCREWS!
4.) Remove the battery holder from the cabinet. Then remove the original battery
from the holder and insert the new battery into the holder the same way.
5.) Slide the holder with the
new battery back into the
opening in the cabinet.
6.) Replace the two screws
that secure the battery
holder in the cabinet, and
confirm that the BATT.
LOW indicator is ‘Off’.
7.) Save these instructions.
You’ll have to do this again
five to eight years from
now!
17
SCR120_080206.p65
17
2/8/2006, 15:56
RESETTING THE CLOCK AFTER A TOTAL MEMORY LOSS
If you do not change the built in lithium battery within a reasonable period of time
after you see the BATT. LOW ‘flashing’warning indicator, the lithium battery may
become exhausted and will no longer be able to supply back up power to the E-Z
Set internal computer. If the unit is disconnected from the AC outlet after the battery
is exhausted, or if a power interruption occurs, the E-Z Set memory will be lost and
the clock will need to be reset when the power is restored. Be sure to install a fresh
lithium battery before you reset the clock, otherwise the clock will need to be reset
each time the power is interrupted.
If the lithium battery is exhausted and you experience an interruption in the AC
power supply, the clock will reset itself to its initial default setting when the power is
restored.
The initial default setting is “AM 12:00, Saturday, January 1st (1. 1), 2005”.
If you notice that the Time on your E-Z Set clock radio is completely incorrect, the
Month/Date and Day indicators are also wrong, you probably experienced a total
memory loss.
To reset the clock after a total memory loss, proceed as follows:
1.) Follow the instructions on page 17 and install a new CR2430 lithium battery in
the battery compartment.
2.) Connect the radio to your AC outlet and let the clock set itself.
3.) Depress the TIME and DATE buttons together. The small display will change
from ‘month/date’to ‘year’.
While holding the TIME and DATE buttons, press the UP or DOWN button to
set the small display to the correct year, then release the buttons.
4.) Depress the DATE button and the UP or DOWN button to set the small display
to the correct month and date. The Day indicator will change automatically as
you adjust the month/date settings. When the correct month and date appear
on the display, release the buttons.
Depress the TIME button and the UP or DOWN button to set the main display
to the correct time. Be sure to confirm that you have set the time correctly to
“AM” or “PM” by observing the AM indicator.
18
SCR120_080206.p65
18
2/8/2006, 15:56
5.) After you set the time, reconfirm that the Day and Month/Date displays are still
correct. Make final adjustments if necessary.
The E-Z Set clock memory is now reset and the new lithium battery will maintain it
for the next 5 to 8 years, depending on the number and duration of the power
outages you experience.
IMPORTANT NOTE:
After resetting the clock, don’t forget to reset your wake up times, and alarm
mode settings, and sleep timer settings as well.
19
SCR120_080206.p65
19
2/8/2006, 15:56
CARE AND MAINTENANCE
LITHIUM BATTERY PRECAUTIONS
• Dispose of the old battery properly. Do not leave it lying around where a young
child or pet could play with, or swallow it. If the battery is swallowed, contact a
physician immediately.
• Battery may explode if mistreated. Do not attempt to recharge it or disassemble
it. Do not dispose of the old battery in a fire.
CARE OF CABINETS
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes
smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or
any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning
pads as these will damage the finish of your radio.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
PLEASE CALL:
1-888-837-8370
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
H.H. SCOTT, INC.
Consumer Affairs Dept.,
5101 Statesman Drive,
Irving, TX 75063.
The Serial Number can be found on the bottom cabinet. We suggest that you
record the Serial Number of your unit in the space below for future reference.
Model Number: SCR120
Serial Number:
20
SCR120_080206.p65
20
2/8/2006, 15:56
H.H. SCOTT, INC.
CLOCK RADIO LIMITED WARRANTY
What does this warranty cover? Any manufacturing defects in original material, including original parts and
workmanship, under normal use and conditions.
For how long? For a period of one (1) year from the date of original purchase in the U.S.
What will we do? If you need service under this warranty, and you provide us with the dated proof of purchase,
we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace
the product in our discretion.
How do you make your warranty claim? If it becomes necessary to repair your unit, you can obtain the name
and mailing location of a Depot Repair Facility by dialing 1-888-837-8370. You should pack your unit in a wellpadded heavy corrugated box, enclose your check or money order payable to the Depot Repair Facility in the
amount of $5.00 to cover the return shipping and handling costs, and enclose a copy of your proof of purchase
(warranty service will not be provided without a dated proof of purchase). Finally, you should ship the unit
prepaid via UPS or parcel post (insured).
What does your warranty not cover? Your warranty does not cover the following:
• Damage from negligence, misuse, abuse, accident, or failure to follow operating instructions.
• Use of product in a commercial application or rentals.
• Changes or repairs by anyone other than an authorized Depot Repair Facility.
• Damage because your unit is improperly connected to the equipment of other manufacturers.
• Units on which the serial number has been defaced, modified or removed.
• Damage to equipment not properly connected to the product.
• Cost incurred in shipping your unit to and from an authorized Depot Repair Facility.
• Ordinary adjustments which you can perform as outlined in the owner’s manual.
• Signal reception problems caused by external antenna or cable systems.
• Products purchased, used, serviced or damaged outside of the United States.
What other limitations apply to your warranty?
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. THIS WARRANTY IS VALID
ONLY IN THE UNITED STATES OF AMERICA. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE
EXPRESSED WARRANTY AS PROVIDED ABOVE BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALL APPLY
TO THE PRODUCT THEREAFTER. WE MAKE NO WARRANTY AS TO THE FITNESS OF THE PRODUCT
FOR ANY PARTICULAR PURPOSE OR USE.
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY EXCEED THE
PURCHASE PRICE PAID BY THE PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES
WILL WE BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS
PRODUCT.
How does state law apply to your warranty?
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, BUT YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED
WARRANTIES OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE,
SO THESE RESTRICTIONS MAY NOT APPLY TO YOU.
HH112N
21
SCR120_080206.p65
21
2/8/2006, 15:56
H.H. SCOTT, INC.
H.H. SCOTT, INC.
Part No. 100-5093
607-06
SCR120_080206.p65
Printed in China
22
2/8/2006, 15:56
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement