Wind Crest PPN Installation instructions

Island or Peninsula Mounted Hoods – Install Quick Specs

PPN Series Hoods - 30” Depth

Installation Type & Discharge Direction

Ceiling/Island – vertical discharge

Discharge Size off Hood Top

14” x 4 ¼” rectangular

Discharge Transition – purchased separately

See “Ventilation” section for options

2"

12

"

Wiring Access

4-1

/4"

1" all w

14"

16" idth s

• 304 Series, 18 gauge stainless steel

• Halogen lighting (dual 50 watt lamps 36” and 42” widths/four 50 watt lamps 54” width

– with Hi/Lo setting

• Dishwasher safe, heavy aluminum mesh filters

• Adjustable canopy extension for 8’ to 10’ ceilings comes standard with hood

• NOTE: Hood can be installed with or without canopy extension(s).

• All Stainless Steel Finish Hoods can be installed Indoors or Outdoors (see

Installation Instructions)

• Widths: 36”, 42” and 54”

Finishes

• Stainless Steel (S), White (W)

Optional Accessories

• Chrome or Brass Rolled Pot Rails

(Model(s): ACCBRC or ACCBRB) – indoor

use only

Hood Carton Weight:

PPN36 = 130 lbs.

PPN42 = 135 lbs.

PPN54 = 142 lbs.

2"

36, 4

2, 5

4"

PPN Hood

12

" all w 16" idth s

30"

32" max

15" min

15"

UL

LISTED 7Z66 C

UL

15"

47" max

36, 4

2, 5

4"

30

"

PPN Hood with

Extension

Copyright 2006 Wind Crest by CNP Industries 1

Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to making any cutouts.

Island or Peninsula Mounted Hoods – Install Quick Specs

PPN Series Hoods - 30” Depth (cont.)

Maximum Power Supply Required*

15 Amps @ 120 V AC, 60 Hz

20 Amps @ 120 V AC, 60 Hz (when used with

VEN150E remote ventilator)

*Electrical rating is maximum required for any combination of ventilator and lighting.

Outdoor Electrical Requirements

Damp outdoor installations require a fault interrupter circuit connection.

Hood Lighting Rating

• 36” and 42” widths: 100 watts w/halogen lights.

• 54” width: 200 watts w/halogen lights

Ventilator Options

1-7/8"

Center Support

54 Models

Chrome/Brass

Rolled Pot Rail

640 CFM, Internal Blower: VEN060I

1000 CFM, Remote Blower: VEN100E

1500 CFM, Remote Blower: VEN150E

Ventilator Motor Ratings

VEN060I: 2.8 Amps @ 120 V AC, 60 Hz

VEN100E: 8 Amps @ 120 V AC, 60 Hz

VEN150E: 12 Amps @ 120 V AC, 60 Hz

Ventilator Dimensions & Accessory

Transitions (see Ventilator section)

CUSTOMER SPECIFICATION:

Hood Width Specified & finish:

(e.g.PPN36S)

Accessories Selected: (e.g. Chrome or brass rails)

Final Hood Model Selected:

Add Any Accessories:

3/4"

Specify Ventilator Selected & Transitions:

_____________________________________

_____________________________________

_____________________________________

Copyright 2006 Wind Crest by CNP Industries 2

Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to making any cutouts.