Specifications Note: 1. All specifications are subject to change

Specifications Note: 1. All specifications are subject to change
The GV‐Hub V2 adds four RS‐232/RS‐485 serial ports through your computer’s USB port. The USB solution for serial port extension is perfect for any RS‐485 to RS‐232 conversion requirements, such as POS and PTZ applications. Specifications OS Supported 32‐bit Windows XP / Windows Vista / Windows 7 / Windows Server 2008 64‐bit Windows 7 / Windows Server 2008 RS‐232 Serial Interface USB Communication Environmental Conditions RS‐485 Signal: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS Connector: DB9 Male x 4 (A, B, C, D) Signal: D+, D‐ Connector: Terminal Block x 4(0 ~ 7, ∞ ~ 17.14 Ω) Serial Line Protection 16 KV ESD for All Signals Compliance USB 2.0 Backward Compatible Speed Full Speed 12 Mbps Parity None, Even, Odd Data Bit 7, 8 Stop Bit 1, 2 Flow Control RTS / CTS, XON / XOFF Speed 600 bps to 115,200 bps Operation temperature 0~55°C / 32~131°F Humidity 5%~95% (non‐condensing) Dimensions(W x H x D) 103 x 30 x 125 (mm) / 4.06 x 1.18 x 4.92 (in) Installation Guide GV‐Hub V2 Note: 1. All specifications are subject to change without notice. 2. When GV‐Hub V2 works with GV‐Wiegand Capture, GV‐Hub V2 does not support 64‐bit Windows versions currently. May 30, 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement