Woodstock SB1039 User's Manual

Model SB1039

South Bend 14" x 40" 16 Speed Lathe 220V

Product Dimensions

Weight........................................................................................................................................................... 2420 lbs.

Width (side-to-side) x Depth (front-to-back) x Height................................................... 80-3/4 x 32-1/8 x 54-3/8 in.

Footprint (Length x Width)........................................................................................................... 80-3/4 x 19-1/2 in.

Shipping Dimensions

Type.................................................................................................................................................. Wood Slat Crate

Content.......................................................................................................................................................... Machine

Weight........................................................................................................................................................... 2684 lbs.

Length x Width x Height................................................................................................................... 90 x 40 x 69 in.

Electrical

Power Requirement................................................................................................................. 220V, 3-Phase, 60 Hz

Full-Load Current Rating................................................................................................................................. 14.3A

Minimum Circuit Size.......................................................................................................................................... 20A

Switch................................................................................................................. Magnetic with Thermal Protection

Switch Voltage.................................................................................................................................................... 220V

Plug Included.......................................................................................................................................................... No

Recommended Plug/Outlet Type.......................................................................................................... NEMA 15-20

Motors

Main

Type........................................................................................................................................ TEFC Induction

Horsepower..................................................................................... 5HP at 3450 RPM, 2.5 HP at 1725 RPM

Voltage...................................................................................................................................................... 220V

Phase.................................................................................................................................................... 3-Phase

Amps.................................................................................................................................................... 14A/10A

Speed....................................................................................................................................... 3450/1720 RPM

Cycle......................................................................................................................................................... 60 Hz

Number of Speeds............................................................................................................................... Variable

Power Transfer ......................................................................................................................... V-Belt & Gear

Bearings.................................................................................................... Shielded and Permanently Sealed

Coolant

Type........................................................................................................................................ TEFC Induction

Horsepower............................................................................................................................................ 1/8 HP

Voltage...................................................................................................................................................... 220V

Phase.................................................................................................................................................... 3-Phase

Amps.......................................................................................................................................................... 0.4A

Cycle......................................................................................................................................................... 60 Hz

Number of Speeds........................................................................................................................................... 1

Power Transfer ............................................................................................................................ Direct Drive

Bearings.................................................................................................... Shielded and Permanently Sealed

Model SB1039 Page 1 of 3

Main Specifications

Operation Info

Swing Over Bed.................................................................................................................................. 14.17 in.

Distance Between Centers...................................................................................................................... 40 in.

Swing Over Cross Slide........................................................................................................................ 8.66 in.

Swing Over Saddle............................................................................................................................. 13.75 in.

Swing Over Gap.................................................................................................................................. 20.94 in.

Maximum Tool Bit Size........................................................................................................................ 0.75 in.

Compound Travel...................................................................................................................................... 4 in.

Carriage Travel..................................................................................................................................... 36.5 in.

Cross Slide Travel...................................................................................................................................... 7 in.

Headstock Info

Spindle Bore........................................................................................................................................ 1.653 in.

Spindle Taper.......................................................................................................................................... MT#5

Number of Spindle Speeds............................................................................................................................ 16

Spindle Speeds....................................................................................................................... 50 — 2570 RPM

Spindle Type.............................................................................................................................. D1-5 Camlock

Spindle Bearings............................................................................................................. NTN Tapered Roller

Spindle Length.................................................................................................................................... 20.87 in.

Spindle Length with 3-Jaw Chuck.................................................................................................... 28.74 in.

Spindle Length with 4-Jaw Chuck.................................................................................................... 30.71 in.

Spindle Nose to Gap............................................................................................................................. 6.46 in.

Tailstock Info

Tailstock Quill Travel.......................................................................................................................... 4-3/8 in.

Tailstock Taper........................................................................................................................................ MT#3

Tailstock Barrel Diameter.................................................................................................................. 1.968 in.

Threading Info

Number of Longitudinal Feeds..................................................................................................................... 17

Range of Longitudinal Feeds............................................................................................... 0.002 — 0.067 in.

Number of Cross Feeds................................................................................................................................. 17

Range of Cross Feeds........................................................................................................... 0.001 — 0.034 in.

Number of Inch Threads............................................................................................................................... 45

Range of Inch Threads................................................................................................................... 2 — 72 TPI

Number of Metric Threads........................................................................................................................... 39

Range of Metric Threads............................................................................................................ 0.2 — 14 mm

Number of Modular Pitches.......................................................................................................................... 18

Range of Modular Pitches.......................................................................................................... 0.3 — 3.5 MP

Number of Diametral Pitches....................................................................................................................... 21

Range of Diametral Pitches............................................................................................................ 8 — 44 DP

Dimensions

Bed Width.................................................................................................................................................. 9 in.

Leadscrew Diameter............................................................................................................................ 1-1/8 in.

Leadscrew TPI................................................................................................................................................. 4

Leadscrew Length.................................................................................................................................... 59 in.

Steady Rest Capacity............................................................................................................ 5/16 — 4-5/16 in.

Follow Rest Capacity................................................................................................................ 5/8 — 3-1/8 in.

Faceplate Size.......................................................................................................................................... 12 in.

Feed Rod Diameter................................................................................................................................. 3/4 in.

Floor to Center Height...................................................................................................................... 42-5/8 in.

Height With Leveling Jacks.............................................................................................................. 54-3/8 in.

Model SB1039 Page 2 of 3

Construction

Base.................................................................................................................................................... Cast Iron

Headstock.......................................................................................................................................... Cast Iron

Headstock Gears.......................................................................................................... Flame Hardened Steel

Bed.............................................................................................. Induction Hardened and Ground Cast Iron

Stand.................................................................................................................................................. Cast Iron

Paint................................................................................................................................................... Urethane

Other

Country Of Origin .............................................................. Taiwan (Some Components Made in USA and Japan)

Warranty ......................................................................................................................................................... 1 Year

Serial Number Location ........................................................................................ ID Label on Front of Headstock

Assembly Time .................................................................................................................... Approximately 2 Hours

Sound Rating .................................................................................................................................................... 76 dB

Features

Allen Bradley Electrical Components

Meehanite Casting, Signature South Bend Three V-Way Bed

Safety Chuck Guard with Micro-Switch Shut-Off

Halogen Work Light (24V/70W)

4-Way Tool Post

Complete Coolant System

Micrometer Carriage Stop

Threading Dial Indicator

NTN Japanese Spindle Bearing

Full Length Splash Guard

Front Removable Sliding Chip Tray

Headstock Gears Run in an Oil Bath

Completely Enclosed Universal Gearbox for Cutting Inch, Metric, Modular and Diametral Pitches

Jog Button and Emergency Stop

Included Accessories

10 in. 4-Jaw Independent Chuck D1-5

8 in. 3-Jaw Scroll Chuck (Mounted to 8 in. D1-5 Back Plate)

12 in. Faceplate D1-5

Follow Rest

Steady Rest with Roller Bearing Tips

#5 to #3 Morse Taper Spindle Sleeve

Two Morse Taper #3 Dead Centers (1 Carbon Steel and 1 Carbide-Tipped)

Six Leveling Pads

Service Tools

Tool Box

USA Written Manual

Model SB1039 Page 3 of 3