WS-A200E WS-A12E WS-A12TE SPEAKER SYSTEMS

WS-A200E WS-A12E WS-A12TE SPEAKER SYSTEMS
SPEAKER SYSTEMS
Full Range Ceiling Type Speakes
Compact High-Power Speaker
WS-A12E
WS-A12TE
WS-A200E
Input terminals
WS-A12E
Input terminals
(push-botton terminal)
WS-A12TE
(1/4 TRS phone jack
replaceable with XLR
connector and push
-type wire terminal)
(simple wire terminal)
system enhances the quality of low frequency. From
music to speeches, the system flexibly responds to the
reproduction of sounds.
The 12cm full range speaker, with a large magnetic
circuit and direct emission system for powerful sound.
Product line up are,
WS-A12E : 8Ω, high power 120W input.
WS-A12TE : High impedance designed for long distance
installation.
•
•
Directivity
Frequency Response
• 2-way Bass Reflex type speaker; 98 dB SPL, 8 Ω
• Power handling capacity: 250 W (continuous program
input) /125 W (RMS)
Flat frequency response of 70 Hz~18 kHz; however,
usable response is obtained below 70 Hz.
Twin-Bessel CD horn for stable, constant directivity
60˚(H) x 40˚(V) coverage; the horn can be rotated 90
degrees without changing mounting.
30cm (12") cone woofer
Thermal protector is provided with both high and low
frequency drivers to prevent damage caused by
accidental excessive input.
•
•
•
•
Directivity
Frequency Response
110
(1W • 1m)
dB
OUTPUT SPL
90
OUTPUT SPL
100
80
90
70
60
IMPEDANCE
50
+10dB 0 -10 -20 -30
500Hz
1kHz
70
2ND H.D.
40
60
30
50
20
10
500Hz
1kHz
2kHz
4kHz
IMPEDANCE
80
-30 -20 -10 0 +10dB
2kHz
4kHz
Horizontal
2ND H.D.
3RD H.D.
40
3RD H.D.
20 50 100 200 500 1k 2k 5k 10k 20k 50k
Hz
+10dB 0 -10 -20 -30
500Hz
1kHz
30
20
-30 -20 -10 0 +10dB
2kHz
4kHz
50 100 200
500
1k
2k
5k 10k 20k 40k
Hz
Vertical
Dimensions
Dimensions
272.5
8-M8
ø275
ø204.4
ø275
148
160
Unit: mm
SPECIFICATIONS
Model.No
Speaker Type
Input Impedance
Power Handling Capacity
Sensitivity
Frequency Response
Dispersion
Dimensions
Weight (approx.)(including ceiling panel)
Input Terminal
WS-A12E
WS-A12TE
Full-range-bass-reflex
8Ω
330 Ω, 1 kΩ, 2 kΩ
60 W (RMS EIA-RS426A)
30 W
120 W (continuous program)
87 dB (1 m/1 W)
90 Hz~20 kHz
120˚ (horizontal) x 120˚ (vertical)
Main unit ø254.7 x 148 (D) mm Speaker panel ø275 x 12 mm
2.5 kg
3.3 kg
push-botton wire terminal
simple wire terminal
Effective power measured by the test method prescribed by EIA (Electronic Industries Association)
RS-426-A (1980). (The test signal is white noise passed through a RC high pass filter with a time
constant of 4 msec. and a RC low pass filter with a time constant of 5 msec.)
390
395
140
552
557
RAMSA
100
dB
0 dB
-10 dB
-20 dB
-30 dB
128
PUBLIC ADDRESS
• Placing priority on sound clarity, use of the bass reflex
140
150
Unit: mm
SPECIFICATIONS
Speaker Type
Input Impedance
Power Handling Capacity
Sensitivity
Frequency Response
Crossover Frequency
Drivers
Low Frequency
High Frequency
Dispersion
Dimensions
Weight (approx.)
Finish
Enclosure
Front Panel
2-way, bass-reflex
8Ω
250 W (continuous program input) 125 W (RMS)
98 dB SPL (1 W, 1 m)
70 Hz~20 kHz
2,500 Hz
30 cm (12") cone type
Twin Bessel horn / compression driver
60˚ (H) x 40˚ (V)
395 (W) x 557 (H) x 272.5 (D) mm
16 kg
Molded resin, black
Punched grille, black
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement