Xerox DP 1015 User's Manual

DP 1015
projector
user's guide
Xerox DP1015
projector
user’s guide
Copyright © 2004 Visioneer, Inc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the
copyright laws.
Xerox ®, the digital X ® are registered trademarks of Xerox Corporation in the United States and/or other countries and
are used under license. All other Xerox product names and product numbers mentioned in this publication are trademarks
of Xerox Corporation. Apple, the Apple logo, and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S.
and other countries.
The Visioneer brand name and logo are registered trademarks of Visioneer, Inc.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. All
Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The
software described is furnished under a licensing agreement. The software may be used or copied only in accordance with
the terms of such an agreement. It is against the law to copy the software on any medium except as specifically allowed in
the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to
another language, for any purpose other than the licensee's personal use and as specifically allowed in the licensing
agreement, without the express written permission of Visioneer.
Part Number: 05-0603-000
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in
Technical Data and Computer Software Clause 52.227-FAR14. Material scanned by this product may be protected by
governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with all
such laws and regulations.
Table of Contents
Welcome
Precautions
Do’s and Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
The Xerox DP1015 Projector
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
The Xerox DP1015 Features and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Video Adapter Connection Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Removing and Replacing the Video Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the Projector
Connecting the Projector for a Data-Only Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting the Projector for a Video and Audio Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect to an S-Video DVD Player or VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect to a Composite Video DVD Player or VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connect to a Digital Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Powering On/Off the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adjusting the Projected Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the Projector Zoom/Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting Projection Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
User Controls
Panel Control and Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Panel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
On-Screen Display (OSD) Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Displaying Menus and Selecting Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjust the Projector Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adjust the Computer Display Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjust the Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Choose a Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Projector Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Maintenance
Changing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cleaning the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Xerox DP1015 User’s Guide
iii
Cleaning the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Xerox DP1015 Projector Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting the Screen Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Notices
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Federal Communications Commission (FCC) for USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Product Recycling and Disposal for USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Xerox DP1015 User’s Guide
iv
Welcome
Your new Xerox DP1015 projector is an XGA/SVGA single chip
0.7” DLP™ (Digital Light Processing) projector with these
outstanding features:
Xerox DP1015 User’s Guide
•
True XGA, 1024 x 768 addressable pixels
SVGA, 800 x 600 addressable pixels
•
3.5 lbs (1.58 kgs) compact design
•
Single chip DLP™ technology
•
Compatible with NTSC, NTSC4.43, PAL, PAL-M, and
PAL-N
•
Compatible with most interfaces comprising YCbCr, YPbPr,
S-Video, and Composite Video/Audio
•
Compatible with Windows 98 (or above) and Apple
Macintosh
•
Full-function remote control that can be used as a mouse
and a laser pointer
•
User-friendly multilingual on-screen display menu
•
User-friendly control panel
•
DVI connector that can be connected to digital or standard
image signals
•
150 Watt user-replaceable lamp (VIP R150/P16)
1
Precautions
Precautions
Follow all warnings, precautions and maintenance as
recommended in this user’s guide to avoid injury, fire, electric
shock, and to maximize the life of your projector.
Warning—Do not look into the projector’s lens when the lamp is
on. The bright light may hurt your eyes.
Warning—Do not look into the laser beam or shine it into others’
eyes when using the remote control as a laser pointer. Laser light
can seriously damage eyes.
Warning—Make sure that the projector is grounded properly by
connecting the power cord to a grounded electric AC outlet. Always
use the power cord that comes with your projector. Do not use an
ungrounded adapter with the grounded plug.
Warning—Do not open or disassemble the product as this may
cause electric shock.
Warning—To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture. Do not place drinks on top
of the projector. Spilled drinks can cause an electric shock hazard
and can also damage the projector.
Warning—Do not cover the lens while the lamp lights.
Warning—When switching the projector off, please ensure the
projector completes its cooling cycle before disconnecting power.
Warning—Turn on the projector first and then the signal sources.
Warning—Be sure to change the lamp when it shows warning
messages. If the lamp burns out while in the projector, it may crack
and scatter glass shards into the projector. To replace the lamp,
follow the procedures in “Changing the Lamp” on page 27.
Warning—Reset the “Reset Lamp Hours” function from the On
Screen Display “Management” menu after replacing the lamp
module (refer to “Projector Management” on page 26).
2
Xerox DP1015 User’s Guide
Precautions
Do’s and Don’ts
Do:
•
Turn off the projector before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the
display housing.
•
Disconnect the power plug from AC outlet if the projector is not
being used for a long period of time.
Don’t:
•
Block the ventilation slots and openings on the projector.
•
Use abrasive cleaners, waxes or solvents to clean the
projector.
•
Use under the following conditions:
— In extremely hot, cold or humid environment.
— In areas susceptible to excessive dust and dirt.
— Near any appliance generating a strong magnetic field.
— In direct sunlight.
Xerox DP1015 User’s Guide
3
The Xerox DP1015 Projector
The Xerox DP1015 Projector
What’s in the Box
Before proceeding, check the contents of the box. If items are
missing or damaged, contact the dealer where you purchased the
projector.
Projector with lens cap
M1DA/VGA and USB cable
S-Video Cable
VGA Cable
USB Cable
Carrying Case with Shoulder Strap
Power Cord
Audio In/Out Cable
Batteries
Remote Control
4
User’s Guide CD, Quick Installation
Card, and Technical Support Card
Composite Video Cable
Xerox DP1015 User’s Guide
The Xerox DP1015 Projector
The Xerox DP1015 Features and Controls
Audio Speaker
Control Panel
Focus Ring
Zoom Wheel
Kensington™ Lock Slot
Foot Adjustor Release Button
Infrared Remote Sensor
Video Adapter (Removed)
Power Connector
(on this side)
Projection Lens
Lens Cap
M1DA Connector
Audio Speaker—Provides audio if the Video Adapter is attached.
Control Panel—Control buttons and Power Indicator light. See
“Panel Control” on page 16 for a description of the Control Panel.
Focus Ring—Rotate to manually adjust the focus of the image.
Zoom Wheel—Rotate to zoom the image in or out.
Kensington™ Lock Slot—Slot for inserting a Kensington cable
and lock to protect your projector from theft.
Foot Adjustor Release Button—Press to release the foot
adjustor to lower or raise the projector.
Projection Lens—Projects the image onto the screen.
Lens Cap—Protective cap to keep the lens from dirt or damage.
Always attach the cap when the projector is not in use.
Infrared Remote Sensor—Infrared receiver that receives signals
from the remote control. Do not cover or block this sensor.
Video Adapter—Removable module. Connect for video
presentations. Remove for computer-only presentations.
M1DA Connector—Connector for computer-only (non-video and
non-audio) input, or for connecting the Video Adapter.
Power Connector—Plug the power cord into this connector.
Xerox DP1015 User’s Guide
5
The Xerox DP1015 Projector
Video Adapter Connection Ports
VGA Port—Plug the VGA cable into this VGA port, and plug the
other end into the video port on your computer. Use this port to
project video from your computer with the projector.
USB Port—Plug the USB cable into this port, and plug the other
end into USB port on your computer so you can use the remote
control as the computer mouse.
S-Video Port—Plug your S-Video source in here, such as a
professional-quality DVD player or VCR with an S-Video port.
Video Port (Yellow)—Plug your composite video source in here,
such as a DVD player or VCR. Connect the yellow (video) plug to
your video source and to this video port.
Audio/R Port (Red)—Plug in the red connector of the composite
video cable here. Plug the other red end into the audio out port of
your composite source, such as a DVD player or VCR.
Audio/L Port (White)—Plug in the white connector of the
composite video cable here. Plug the other white end into the audio
out port of your composite source, such as a DVD player or VCR.
Audio In Port—Plug in the audio cable to this port, and plug the
other end into the audio out port of an audio source, such as the
audio out port of your computer.
Audio Out Port—Plug external speakers into this port.
6
Xerox DP1015 User’s Guide
The Xerox DP1015 Projector
Removing and Replacing the Video Adapter
Remove the video adapter if you want to project non-video data—
such as spreadsheets or text documents—from your computer.
1. Make sure the projector’s power is turned off.
2. Unscrew the two thumbscrews.
Thumbscrews
3. Carefully pull the video adapter straight out and away from the
projector body.
The video adapter plugs into the M1DA port on the back of the
projector body. Be careful not to bend the pins of the M1DA
connector on the back of the video adapter as you pull it free.
The M1DA port is now exposed so you can connect your
computer.
M1DA Port
4. See “Connecting the Projector for a Data-Only Display” on
page 8 for the connections to the M1DA port.
5. To replace the video adapter, align the pins of the M1DA
connector on its inside with the M1DA port and then push the
video adapter onto the projector body. Tighten the
thumbscrews.
NOTE: If the video adapter is not connected properly, or is loose,
the projector will not project an image.
Xerox DP1015 User’s Guide
7
Connecting the Projector
Connecting the Projector
Connecting the Projector for a Data-Only Display
In this configuration, the projector displays data (such as
spreadsheets or text files) from your computer. Video and audio
are not available.
USB and VGA connectors
Power Cord
M1DA/VGA and USB cable
Video Adapter (Removed)
M1DA Connector
1. Make sure the projector and computer are turned off.
2. Remove the video adapter from the back of the projector.
3. Using the M1DA/VGA and USB cable, connect the M1DA
connector to the projector’s M1DA port. Connect the VGA
connector to the VGA port on the computer.
4. Connect the USB connector to the USB port on your computer.
You can then use the remote control as a remote mouse.
5. Plug the power cord into the projector and then into an
electrical outlet.
6. Turn on the projector first, and then the computer.
NOTE: Your DP1015 projector works best when the computer
screen resolution is set to 1024 x 768 or less. To reset the
computer screen resolution, see “Setting the Screen Resolution”
on page 35.
8
Xerox DP1015 User’s Guide
Connecting the Projector
Connecting the Projector for a Video and Audio Display
Your projector can display video and play audio from a variety of
sources, as shown in the following figure.
S-Video Source, (DVD player or VCR)
Composite Video
Cable (used for
Audio In/Out)
Digital Tuner
Computer Audio In
S-Video Cable
VGA Cable
Audio In/Out
Cable
Power Cord
VGA Cable
Audio In/Out Cable
External Speakers
for Audio Out
Computer Video In
with Remote Control
as the Mouse
Composite Video
Cable (used for
Audio and Video)
USB Cable
Composite Video Source
(DVD player or VCR)
1. Make sure the projector and computer are turned off.
2. Attach the video adapter to the back of the projector.
3. Connect the cables for the video and audio sources. See the
next section for a description of the connections.
4. Plug the power cord into the projector and then into an
electrical outlet.
5. Turn on the projector first, and then the computer and other
components.
6. Press the Source key to view the current video image.
If you have multiple video sources connected, press the
Source key or the
keys to select among the sources.
NOTE: Your DP1015 projector works best at computer screen
resolutions of 1024 x 768 or less. To reset the computer screen
resolution, see “Setting the Screen Resolution” on page 35.
Xerox DP1015 User’s Guide
9
Connecting the Projector
Connecting Components
You can connect your projector to several types of video and audio
devices. Refer to the figure on the previous page as a guide for the
different connections described below.
Connect to a Computer
Typical Setup: You have a video file on your computer and want to
project it through your projector.
1. Plug the VGA cable into the VGA port on the computer, and
then into the VGA port on the projector.
2. If you want to use the remote control as a mouse, plug the USB
cable into the USB port on the computer, and then into the USB
port on the projector.
3. If your video file includes audio, plug the Audio In/Out cable
into the Audio Out port on your computer, and then into the
Audio In port on the projector.
The audio will play through the built-in audio speaker on the
projector’s Video Adapter.
4. If you want to play the audio through external speakers, plug
another Audio In/Out cable into the Audio Out port on the
projector, and then into the Audio In port on the speakers.
NOTE: Some Notebook computers deactivate their screens
when a second display device is attached, or will not display an
image through the projector until the screen settings are adjusted
for the second display device. Please see the user’s manual that
you received with your Notebook for the steps to reactivate its
screen and display the projected image.
Connect to an S-Video DVD Player or VCR
Typical Setup: You have a DVD or Videotape that you want to
project through your projector.
1. Plug the S-Video cable into the S-Video port on the DVD Player
or VCR, and then into the S-Video port on the projector.
2. If the DVD or Videotape includes audio, plug the red and white
connectors on the Composite Video Cable into the
corresponding red and white ports on the projector. Then plug
the red and white connectors on the other end of the cable into
the corresponding ports on the DVD Player or VCR.
10
Xerox DP1015 User’s Guide
Connecting the Projector
3. Do NOT plug the yellow connector into the projector or the
DVD Player or VCR.
The audio will play through the built-in audio speaker on the
projector’s Video Adapter.
4. If you want to play the audio through external speakers, plug
the Audio In/Out cable into the Audio Out port on the projector,
and then into the Audio In port on the speakers.
Connect to a Composite Video DVD Player or VCR
Typical Setup: You have a DVD or Videotape that you want to
project through your projector.
1. Plug the red, white, and yellow connectors on the Composite
Video Cable into the corresponding red, white, and yellow ports
on the DVD Player or VCR.
2. Plug the red, white, and yellow connectors on the Composite
Video Cable into the corresponding red, white and yellow ports
on the projector.
The audio will play through the built-in audio speaker on the
projector’s Video Adapter.
3. If you want to play the audio through external speakers, plug
the Audio In/Out cable into the Audio Out port on the projector,
and then into the Audio In port on the speakers.
Connect to a Digital Tuner
Typical Setup: You want to play programs from your digital tuner
through your projector.
1. Plug the VGA Cable into the VGA port on the digital tuner.
2. Plug the VGA Cable into the VGA port on the projector.
The audio will play through the built-in audio speaker on the
projector’s Video Adapter.
3. If you want to play the audio through external speakers, plug
the Audio In/Out cable into the Audio Out port on the projector,
and then into the Audio In port on the speakers.
Xerox DP1015 User’s Guide
11
Connecting the Projector
Powering On/Off the Projector
To turn on the projector power
1. Remove the lens cap.
2. Make sure that the power cord and the cables from the video
and audio sources are securely connected to the projector. The
LED indicator flashes slowly.
3. Turn on the lamp by pressing and holding down the
Power button on the remote control or control panel.
The LED indicator turns a steady green.
A warm-up message appears on the screen.
4. Turn on all the other connected components.
The projector then automatically detects the type of
components attached to it.
After about 30 seconds, the image for your projection appears.
5. Press the Source key to view the image from the current video
source.
If you have multiple video sources connected, press the
Source key or the
keys to select among the sources.
6. (Optional, but recommended) Press the Auto/Enter button on
the control panel to optimize the projector to the attached
components.
If the screen displays “No Signal”, please make sure the signal
cables are securely connected.
NOTE: Turn the projector on first, then the computer and other
components.
Power
Lens cap
12
Xerox DP1015 User’s Guide
Connecting the Projector
To turn off the projector power
1. Press the
Power button on the projector or remote control to
turn off the projector lamp.
An on-screen message appears asking if you’re sure you want
to turn off the lamp.
2. Press the
Power button again to confirm.
If you don’t press the button within ten seconds, the message
disappears and the lamp remains lit. This convenient design is
in case you accidently press the
Power button in the middle
of a show and do not want to turn off the projector.
If you do press the
Power button a second time, the
LED indicator flashes rapidly. Then the projector automatically
shuts itself down.
3. Do not turn on the projector again for at least two minutes.
When the LED indicator is again flashing slowly it is safe to turn
the lamp back on.
4. After two minutes, disconnect the power cord.
NOTE: Do not disconnect the power cord until the projector’s
cooling fan stops (about two minutes). This protects the lamp
from overheating and possible damage
LED Indicator
LED Indicator
Xerox DP1015 User’s Guide
•
Slow flash—Normal operation; the power cord is plugged in.
•
Steady light, not flashing—Normal operation; the lamp power
is on and the projector is operating normally.
•
Rapid flashing during lamp shutdown—Normal operation;
the fan runs for about 30 seconds to cool down the lamp.
•
Rapid flashing while the lamp is powered—Warning: either
the lamp has overheated and the fan runs automatically, or the
fan has malfunctioned. You cannot turn off the power to the
lamp until it has cooled down.
13
Connecting the Projector
Adjusting the Projected Image
NOTE: The projector is equipped with a “foot adjustor” for
adjusting the projector height.
To raise the projector
1. Lift the projector up and press the foot adjustor release button.
The foot adjustor pops out.
2. Press the foot adjustor release button and hold it in while
raising the projector to the display angle you want, then release
the button to lock the foot in position.
Foot Adjuster
Release Button
Foot Adjuster
To lower the projector
1. Hold the projector with one hand, then press and hold down the
foot adjustor release button.
2. Lower the projector, then release the foot adjustor release
button to lock the foot in position.
NOTE: When placing the projector in its carrying case, please
first retract the foot adjustor to avoid breakage.
14
Xerox DP1015 User’s Guide
Connecting the Projector
Adjusting the Projector Zoom/Focus
You adjust the focus and zoom in/out with the focus ring and zoom
wheel. To focus the image, rotate the focus ring until the image is
clear. The projector can focus to distances from 4.58 feet to 32.81
feet (1.4m to 10.0m).
Zoom Wheel
Focus Ring
Adjusting Projection Image Size
Use the following figure and table to select the best projection
distance and screen size. Maximum and minimum screen sizes are
diagonal measurements. The table is for reference only.
Minimum Screen Size
Maximum Screen Size
1.45m (57”)’
2.0m (78”)
4.0m (157”) 6.0m (236”)
10.0m (393”)
Projection Distance
1.45m (57”)*
2.0m (78”)
4.0m (157”)
6m (236”)
10m (393”)
Minimum Screen
Size (XGA)
42”
49”
99”
148”
247”
Maximum Screen
Size (XGA)
48”
57”
113”
170”
283”
Minimum Screen
Size (SVGA)
27”
38”
77”
115”
191”
Maximum Screen
Size (SVGA)
31”
44”
88”
132”
219”
*1.40 (55”) for SVGA
Xerox DP1015 User’s Guide
15
User Controls
User Controls
Panel Control and Remote Control
Panel Control
Control
Description
Indicator (LED)
Flashes during power startup; remains steady
when projector is ready; flashes rapidly if lamp
overheats or fan fails.
Power
Turns projector power on and off. See
“Powering On/Off the Projector” on page 12 for
the specific power on/off sequences.
Auto/Enter
OSD menus displayed: Confirms your
selection of items on the menus.
OSD menus not displayed: Synchronizes the
projector with the connected components to
produce the optimum projected image.
Menu
Opens the On-Screen Display (OSD) menus.
To close the OSD, press the Menu button
again.
Directional Selection OSD menus displayed: Selects items or
Keys
adjusts settings of items.
OSD menus not displayed, and you have
(
)
multiple video sources connected: Press the
keys to select among the sources and
pick the one to display its image.
16
Xerox DP1015 User’s Guide
User Controls
Remote Control
Laser Pointer Button
Button
Description
Laser Pointer
Press to activate a laser beam for use as a
pointer. Warning—Do not look into the laser
beam or shine it into others’ eyes when using
the remote control as a laser pointer. Laser
light can seriously damage eyes.
Freeze/Esc/L
OSD menus displayed: Exits the OSD menus.
OSD menus not displayed: Holds the current
image still on the screen. Press again to
resume the action. Only for use with
presentations, not video.
Remote used as a mouse: Left mouse button.
Enter/R
OSD menus displayed: Selects OSD option.
Remote used as a mouse: Right mouse button.
Directional Selection OSD menus displayed: Selects items or
Keys (
) adjusts settings of items.
OSD menus not displayed, and you have
multiple video sources connected: Press the
keys to select among the sources and
pick the one to display its image.
Remote used as a mouse: Moves the mouse
cursor.
Zoom active: Moves the zoomed image.
Xerox DP1015 User’s Guide
17
User Controls
Pg.Up
Zooms in (enlarges) the image.
Remote used as a mouse: Go to previous
page.
Press in to activate image correction for
images that are wider at the top or bottom due
to tilting the projector. Press the
keys to
adjust the image.
Not recommended for spreadsheets or text
displays to avoid text distortion.
Pg.Dn
Zooms out (reduces) the image.
Remote used as a mouse: Go to next page.
Power
Turns projector power on and off.
Mode
Activates the remote control as a mouse. The
green LED indicator on the Mode button turns
on indicating mouse active mode. Press again
to turn off mouse mode. A USB cable must be
connected to the projector for the mouse mode
to work.
Menu
Press to display the OSD menus. Press again
to exit the OSD menus.
Source
Press to view the current video image.
If you have multiple video sources connected,
press again to select among the sources.
Blank
Hides image being displayed and displays a
blank blue screen. Press again to resume
display of the image. Typically used for a
pause in a presentation.
Auto
Automatically adjusts the projected image to
the optimum settings for the attached
components.
NOTE: The infrared emitter is at the top of the remote control
near the laser pointer. It has a range of 9m (29.5 feet). Do not
block the infrared emitter. If the projector does not pick up the
signals from the remote control, make sure the emitter and
sensor on the projector are not blocked and that the emitter is
within range.
18
Xerox DP1015 User’s Guide
User Controls
Using the Remote Control as a Mouse
If a USB cable is connected to your computer and the projector, the
remote control can be used in place of the computer’s mouse. This
is especially helpful when giving a presentation in front of an
audience so you can move the mouse cursor on the screen without
having to be near the computer.
1. Press the Mode button on the remote control to switch it into
mouse mode.
The LED indicator on the Mode button turns green indicating
mouse mode is active.
2. The remote control can now be used as the mouse.
To de-activate the mouse mode, press the Mode button again.
Button
Freeze/Esc/L
Left mouse button.
Enter/R
Right mouse button.
Pg.Up
Go to previous page.
Pg.Dn
Go to next page.
Mode
Turns on/off the remote control as a mouse.
Directional Selection
Keys (
)
Xerox DP1015 User’s Guide
Mouse Function
Moves the mouse cursor.
19
User Controls
On-Screen Display (OSD) Menus
The On-Screen Display (OSD) menus provide the options to make
image adjustments and change a variety of settings.
Displaying Menus and Selecting Items
1. To open the OSD Menu, press the Menu button on the remote
control or on the projector’s control panel.
To close the OSD Menu, press the Freeze/ESC/L button. The
menus close if you don’t select from them within 10 seconds.
This example shows the Management menu selected from the
OSD Main menu.
OSD Main menu
Selected menu (Management
menu in this example)
2. To select one of the menus on the OSD Main menu, press the
keys.
3. Press the
key or Enter/R button to get to the selected menu.
4. Press the
keys to highlight a control on the selected
menu, then press the Enter/R button. In the example above,
the OSD Location control is highlighted.
5. Press the
keys to adjust the highlighted control.
6. To accept your new setting, press the Menu button to return to
the OSD Main menu.
7. When you’re finished changing settings, press the Menu button
or the Freeze/ESC/L button. The OSD menu closes and your
new settings are in effect.
NOTE: As you’re adjusting a control, you can return it to its
previous setting by pressing the Auto button.
NOTE: The menus in this section show typical settings, but the
actual settings you will see depend on the type of video signal.
20
Xerox DP1015 User’s Guide
User Controls
Adjust the Projector Image
The Image menus are slightly different for Video Mode (the Video
Adapter is attached to the projector) and VGA Mode (the Video
Adapter is removed).
Image Menu (Video Mode)
Brightness—Lightens or darkens the image. The higher the
number, the brighter the image.
You may need to readjust the Brightness after the projector warms
up.
Contrast—Controls the degree of difference between the lightest
and darkest parts of the image. Adjusting the contrast changes the
amount of black and white in the image. The higher the number the
greater the contrast.
Hue—Adjusts the balance between the red and green colors in the
image. Increasing the Hue increases the amount of red in the
image. Decreasing the Hue increases the amount of green in the
image.
Saturation—Adjusts the image from black and white to fully
saturated color. The higher the number, the greater the color
saturation.
Sharpness—Adjusts the sharpness of the image. The higher the
number the sharper the image.
Xerox DP1015 User’s Guide
21
User Controls
Image Menu (VGA Mode)
[
Brightness—Lightens or darkens the image. The higher the
number, the brighter the image.
You may need to readjust the Brightness after the projector warms
up.
Contrast—Controls the degree of difference between the lightest
and darkest parts of the image. Adjusting the contrast changes the
amount of black and white in the image. The higher the number the
greater the contrast.
Keystone—Adjusts image distortion caused by tilting the projector.
Do not change this setting when displaying text or spreadsheets.
Changing the Keystone setting may distort the displayed text.
Zoom—Enlarges or reduces the image size. The higher the
number the more the image is enlarged.
Sometimes when you zoom an image, you will then want to move it
left or right to center it on the screen. To zoom the image and also
move it:
1. With the Zoom control selected on the menu, press the
Enter/R key.
Now the Pg.Up or Pg.Dn keys on the remote control will
enlarge or reduce the image, and the
keys will move
the image left or right
2. Press the Pg.Up or Pg.Dn keys on the remote control to
enlarge or reduce the image.
3. Press the
keys to move the image left or right.
4. Press the Enter/R key again to return to the menu.
22
Xerox DP1015 User’s Guide
User Controls
Adjust the Computer Display Image
The Display menus are slightly different for Video Mode (the Video
Adapter is attached to the projector) and VGA Mode (the Video
Adapter is removed).
Display Menu (Video Mode)
Keystone—Adjusts image distortion caused by tilting the projector.
Do not change this setting when displaying text or spreadsheets.
Changing the Keystone setting may distort the displayed text.
Proportion—Switches the length-to-width aspect ratio between
4:3 and 16:9. The correct proportion to select is based on the type
of video source you are using. If the image seems to be distorted or
stretched, change the proportion.
User Color—Select Yes to adjust individual colors manually. The
menu on the left appears. Select No to adjust the color
temperature. The menu on the right, with the Color Temp control,
appears.
User Red, User Green, User Blue—Adjust the amount of colors in
the Display image.
Color Temp—Adjusts the color temperature range. Higher
temperatures make the screen look colder, lower temperatures
make the screen look warmer. The available color temperature
range is between 6100K and 9300K.
Xerox DP1015 User’s Guide
23
User Controls
Display Menu (VGA Mode)
Frequency—Changes the display data frequency to match the
frequency of your computer’s graphics card. If vertical flickering
lines appear on the image, adjust the frequency until they
disappear.
Phase—Synchronizes the signal timing of the display with the
timing of your computer’s graphics card. If the image flickers or is
unstable, adjust the tracking until the image is stable.
V Position—Moves the image up and down on the screen.
H Position—Moves the image left and right on the screen.
Proportion—Switches the length-to-width aspect ratio between
4:3 and 16:9. The correct proportion to select is based on the type
of video source you are using. If the image seems to be distorted or
stretched, change the proportion.
User Color—Select Yes to adjust individual colors manually. The
menu on the left appears. Select No to adjust the color
temperature. The menu on the right, with the Color Temp control,
appears.
User Red, User Green, User Blue—Adjust the amount of colors in
the Display image.
Color Temp—Adjusts the color temperature range. Higher
temperatures make the screen look colder, lower temperatures
make the screen look warmer. The available color temperature
range is between 6100K and 9300K.
24
Xerox DP1015 User’s Guide
User Controls
Adjust the Audio
Volume—Adjusts the overall volume.
Treble—Adjusts the treble volume.
Bass—Adjusts the amount of medium and lower audio
frequencies.
Mute—Mutes the audio.
Choose a Language
1. Use the
keys to select the language you want.
2. Press the Menu button.
The menus will be displayed in the selected language.
Xerox DP1015 User’s Guide
25
User Controls
Projector Management
OSD Location—Sets the screen location of the OSD menu.
Projection:
•
Front-Desktop—Projects onto a screen in front of the
projector. The factory default setting.
•
Rear-Desktop—Projects a reversed image so you can project
from behind a translucent screen.
•
Front-Ceiling—Projects an image turned upside down for
ceiling-mounted projection.
•
Rear-Ceiling—Projects a reversed, upside-down image for
ceiling-mounted projection from behind a translucent screen.
Lamp Remind—Displays the lamp’s elapsed operating time (in
hours), and lets you set a warning message that is displayed when
the lamp is within 30 hours of its maximum life.
Lamp Reset—Resets the timer that monitors the lamp’s elapsed
operating time. Reset this option only after installing a new lamp.
Auto Adjust—Automatically adjusts the display image to its
optimum settings for the type of display source.
Reset All—Resets the projector to its original factory settings.
Source Type—Switches among the available video sources.
Select the type of video source connected to your projector. Select
Auto Scan to have the projector automatically scan the connected
video sources and select the type that is connected.
NOTE: The RGB and Digital RGB Source Type options are for
use when connecting a computer to the projector. RGB is for
older computers, Digital RGB is for newer computers with a DVI
or Digital RGB capability. When using Digital RGB as the Source
Type, be sure to remove the video adapter from the projector.
26
Xerox DP1015 User’s Guide
Maintenance
Maintenance
Changing the Lamp
The projector’s lamp life is approximately 1500 hours of use. The
projector automatically monitors the lamp life. After 1500 hours of
use, the projector displays a message that the lamp life is over and
the lamp needs to be replaced.
When you see the message, please change the lamp as soon as
possible.
Warning—The lamp module is the only user-replaceable part in
the projector. To prevent electric shock, do not open the projector
case.
Warning—To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The high-pressure lamp
module may explode if handled incorrectly, and may shatter and
cause injury if dropped.
Warning—The lamp compartment is hot! Allow the projector to
cool down at least thirty minutes.
To change the lamp module
1. Turn off the projector’s power.
2. Disconnect the power cord.
3. Let the projector lamp cool completely, at least thirty minutes.
4. Use a screwdriver to remove the cover screw.
5. Then, press down on the cover lock to free the cover.
Cover Lock
Xerox DP1015 User’s Guide
27
Maintenance
6. Remove the cover.
7. Remove the three lamp module retaining screws.
8. Lift up the handle and pull out the lamp module.
Lamp Module
9. Put the new lamp module into the lamp bay and gently press it
down. The lamp can only be inserted in one direction. If the
lamp does not seem to fit, do not press down hard. Make sure
the connections on the lamp module are aligned with the
connectors in the lamp bay.
10. Replace the retaining screws, cover, and cover screw.
Make sure the cover is securely in place. If the cover is loose,
the projector will not start.
28
Xerox DP1015 User’s Guide
Maintenance
Cleaning the Projector
Keeping the vents and lens clean will help maximize the projector’s
performance.
Cleaning the Lens
1. Turn off the projector and let it cool down.
2. Pour a small amount of glass cleaner into the center of a soft
cloth. Never squirt cleaner directly onto the lens.
3. Wipe the lens in a circular motion.
Always keep the lens cap on the lens when the projector is not in
use.
Cleaning the Projector
1. Turn off the projector and let it cool down.
2. Unplug the power cord.
3. Using a damp cloth, clean the projector’s case, and then
carefully remove any dust blocking the projector’s cooling
vents.
Never use an abrasive cleanser or cleaning solvent on the case
or the vents.
Do not try to clean dust from the inside the projector’s case.
Xerox DP1015 User’s Guide
29
Maintenance
Troubleshooting
If you try the troubleshooting procedures described in this section
and the problem persists, you may have a malfunctioning projector.
Refer to the technical support card that you received with your
projector or contact the retailer where you purchased your
projector. Also visit our web site at www.xeroxprojectors.com for
additional technical information.
Problem: No image appears on the screen.
Check for one of these possible problems:
•
Is the video adapter loose? Make sure the video adapter is
properly secured at the back of the projector with the two
thumbscrews.
•
Are the cables loose or not plugged in securely? Inspect
the cable connections. Make sure the cables are plugged in
securely.
•
Are any of the pins on the cables bent or broken? Inspect
the pins on the cable plugs to make sure none of the pins are
bent or broken.
•
Is the projection lamp securely installed? Check that the
projection lamp is securely installed, especially if you just
changed it. See the section “Changing the Lamp” on page 27
for details about the lamp installation.
•
Is the power on? Check that the projector’s power switch is
turned on and that the power cord is plugged in securely to a
working power outlet. If you are using a power strip, make sure
it is turned on and plugged in.
•
Is the lens cap still on? Make sure you have removed the
lens cap from the lens at the front of the projector.
•
Are the Brightness and Contrast set incorrectly? Adjust the
Brightness and Contrast until a picture appears. See “Adjust
the Projector Image” on page 21.
If none of the above solves the problem, press the Source button
on the remote control to select the correct video source.
Problem: The image is incorrectly displayed, or scrolls,
or is only partially displayed.
Press the Auto button on the remote control, or the
Auto/Enter button on the projector control panel.
If the image is still not projected correctly, the resolution setting of
your computer screen is too high (greater than 1024 x 768) and
you must reset it.
30
Xerox DP1015 User’s Guide
Maintenance
For Windows 3.x:
1. In the Windows Program Manager, click the Windows Setup
icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to 1024 x 768.
For Windows 95, 98, 2000, XP:
1. From the Windows Start menu, select Settings/Control Panel
and then double-click the Display icon.
2. Select the Setting tab.
The Desktop Area shows the resolution setting.
3. Verify that the resolution setting is 1024 x 768 or less.
If the projector is still not projecting the whole image, you will also
need to select another monitor display for your computer. Use the
following steps.
To select another monitor display:
1. On the Display dialog box that you opened in the steps above,
click the Advanced Properties button.
2. Select the Monitor tab and click the Change button.
3. Click Show all devices.
4. Under the Manufacturers box, select Standard monitor types.
5. Under the Models box, choose the resolution mode.
6. Verify that the resolution setting of the monitor display is less
than or equal to 1024 x 768.
If you are using a Notebook PC:
1. Follow the steps above to set the resolution to 1024 x 768 or
less.
2. Switch the Notebook PC display to the external display only
or CRT only mode.
If you experience difficulty changing resolutions or your monitor
freezes, restart all the equipment and the projector.
Problem: The screen of your Notebook or PowerBook
computer is not displaying your presentation
If you are using a Notebook PC:
Some Notebook PCs deactivate their own screens when a second
display device is attached. Please see the user’s manual that you
received with your Notebook PC for the steps to reactivate its
screen.
Xerox DP1015 User’s Guide
31
Maintenance
If you are using an Apple PowerBook:
1. From the Apple menu, choose Control Panels/PowerBook
Display.
2. Turn on Video Mirroring.
3. Click the Close box.
Problem: The image is flickering or otherwise unstable
Try one of these possible solutions:
•
Press the Auto button on the remote control, or the
Auto/Enter button on the projector Control Panel.
•
Change the Phase setting on the OSD Display menu. See
“Display Menu (VGA Mode)” on page 24.
•
Change the number of colors that your computer displays on its
monitor. See the documentation that you received with your
computer for the steps to change the number of colors its
monitor can display.
Problem: Image has vertical flickering stripes.
Try one of these possible solutions:
•
Press the Auto button on the remote control, or the
Enter button on the projector control panel.
•
Change the Frequency setting on the OSD Display menu. See
“Display Menu (VGA Mode)” on page 24.
•
Reset the display mode of your computer’s graphic card to
make it compatible with the projector. See “Setting the Screen
Resolution” on page 35 for details.
Problem: Image is out of focus.
Try one of these possible solutions:
32
•
Adjust the focus ring on the projector. Turn the focus ring until
the image comes into focus.
•
Make sure the distance between the projector and the screen is
between 1.45m and 10.0m. See “Adjusting Projection Image
Size” on page 15 for details.
Xerox DP1015 User’s Guide
Maintenance
Problem: When the projector is connected to a DVD
player, playing a film with a 16:9 aspect ratio makes the
image looks stretched out.
Try one of these possible solutions:
•
Reset your DVD player to display at a 4:3 aspect ratio. See the
DVD player user’s guide for the steps to adjust its aspect ratio.
•
Using the OSD Menus, go to the Display Menu page and select
a new Proportion. Change the Proportion to 4:3.
Problem: The colors of the projected image look different
than the colors of the image on the computer screen.
Use the OSD Image and Display menus to adjust the colors.
Problem: Image is reversed.
Use the OSD Management Menu to change the projection
direction to display the image properly.
Problem: No sound.
Make sure the audio cables and other cables are connected
properly.
Problem: Remote control does not work.
Check for one of these possible problems:
•
Are you too far from the projector? The remote control has a
range of 29.5 ft (9m). Move closer to the projector and try the
remote control again
•
Is anything blocking the infrared sensors on the projector?
Make sure the infrared sensors are not covered or blocked
from receiving signals from the remote control.
•
Are the batteries in the remote control dead? Replace the
batteries in the remote control.
Problem: Lamp burns out or make a popping sound.
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. See “Changing
the Lamp” on page 27 to replace the lamp. If the lamp burns out
while in the projector, it may crack and scatter glass shards into the
projector which can block a blower fan and stop it from turning.
Xerox DP1015 User’s Guide
33
Maintenance
Xerox DP1015 Projector Specifications
Resolution
Lamp
Brightness
Number of Pixels
Displayable Colors
Projection Distance
Throw Ratio
Zoom Ratio
Uniformity
Aspect Ratio
Contrast Ratio
Video Compatibility
VGA Compatibility
Horizontal Frequency
Vertical Scan Rate
Power Supply
Power Consumption
Input/Output Connectors
Weight
Dimensions (W x H x D)
Operating Temperature
Safety and agency certifications
34
XGA:
1024x 768
SVGA: 800 x 600
150W user-replaceable VIP lamp
1500 lumens
1024 pixels (horizontal) by 768 lines (vertical)
16.7 million colors
4.76 ~ 32.81 feet (1.45m ~ 10m)
1.34:1~ 1.6:1 (Distance: Diagonal)
1.2:1 (Manual Zoom/Focus)
85%
4:3 or 16:9, screen selectable
900:1
NTSC/PAL
RGB/DVD
31.5 ~ 80kHz
56Hz ~ 85Hz
AC input 100~240V; 0.91 A ~ 2.2A, 50-60Hz
220W
Composite Video RCA cable, Mini DIN 4-pin S-Video cable,
RGB (M1DA-D-Sub 15 pin), DVI (M1DA), RS232 (M1DA),
YPbPr (M1DA, VGA), Mini Jack (3.5 mm), Audio RCA Jack,
USB, Audio Output 1 Watt speaker
3.5 pounds (1.6 kg)
9.01 x 2.72 x 7.60 inches (229 x 69 x 193 mm)
41° ~ 95° F (5° ~ 35° C)
FCC Class B, UL 1950
Xerox DP1015 User’s Guide
Maintenance
Setting the Screen Resolution
For best viewing on your computer screen, its resolution should be
set to 1024 x 768 or less. To reset the screen resolution, follow the
steps below, referring to the chart on page 36 for the correct
settings for your type of computer and monitor.
If you have a Windows PC:
1. From the Windows Start menu, select Settings/Control Panel
and double-click the Display icon.
2. Click the Settings tab.
3. Drag the resolution slider.
4. Click the Advanced button and select the Monitor tab.
5. Select the Refresh rate from the drop-down menu.
Refer to the chart on page 36 for Windows computers for the
correct refresh rate for the resolution you selected.
6. Click OK, then click OK on the Display Properties dialog box.
If you have an Apple Macintosh:
1. From the Apple menu, select Control Panels/Monitors &
Sound.
2. Click the Monitor icon.
3. Select the resolution and refresh rate from the resolution menu.
Refer to the chart page 37 for Apple Macintosh computers for
the compatible resolutions for you type of Apple computer.
4. Click the Close box.
Xerox DP1015 User’s Guide
35
Maintenance
Compatibility Modes—Windows Computers
Mode
Resolution
(Analog)
V. Frequency
(Hz)
H. Frequency
(Hz)
VESA VGA
640 x 350
70
31.5
VESA VGA
640 x 350
85
37.9
VESA VGA
640 x 400
85
37.9
VESA VGA
640 x 480
60
31.5
VESA VGA
640 x 480
72
37.9
VESA VGA
640 x 480
75
37.5
VESA VGA
640 x 480
85
43.3
VESA VGA
720 x 400
70
31.5
VESA VGA
720 x 400
85
37.9
SVGA
800 X 600
56
35.2
SVGA
800 X 600
60
37.9
SVGA
800 X 600
72
48.1
SVGA
800 X 600
75
46.9
SVGA
800 X 600
85
53.7
VESA XGA
1024 x 768
43.4
35.5
VESA XGA
1024 x 768
60
48.4
VESA XGA
1024 x 768
70
56.5
VESA XGA
1024 x 768
75
60.0
VESA XGA
1024 x 768
85
68.7
VESA SXGA*
1152 x 864
70
63.8
VESA SXGA*
1152 x 864
75
67.5
VESA SXGA*
1152 x 864
85
77.1
VESA SXGA*
1280 x 960
60
60
VESA SXGA*
1280 x 960
75
75
VESA SXGA*
1280 x 1024
43
46.4
VESA SXGA*
1280 x 1024
60
63.98
VESA SXGA*
1280 x 1024
75
79.98
* Compression computer image.
36
Xerox DP1015 User’s Guide
Maintenance
Compatibility Modes—Macintosh Computers
Mode
Resolution
(Analog)
V. Frequency
(Hz)
H. Frequency
(Hz)
MAC 16”*
832 x 624
74.55
49.725
MAC 19”*
1024 x 768
75
60.24
MAC*
1152 x 670
75.06
68.68
MAC G4
640 x 480
60
31.35
MAC G4
640 x 480
120
68.03
MAC G4
1024 x 768
120
97.09
IMAC DV
640 x 480
117
60
IMAC DV
800 x 600
95
60
IMAC DV
1024 x 768
75
60
IMAC DV
1152 x 670
75
68.49
IMAC DV
1280 x 960
75
75
* Compression computer image.
Xerox DP1015 User’s Guide
37
Maintenance
38
Xerox DP1015 User’s Guide
Appendix A Notices
Federal Communications Commission (FCC) for USA
This equipment has been tested and found to comply with the
limits for the class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed, and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a
class B computing device, pursuant to FCC Rules. In order to
maintain compliance with FCC regulations, shielded cables must
be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to
radio and TV reception. The user is cautioned that changes and
modifications made to the equipment without the approval of
manufacturer could void the user's authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Product Recycling and Disposal for USA
Xerox operates a worldwide equipment takeback and reuse/
recycle program. Contact your Xerox sales representative (1-800ASK-XEROX) to determine whether this Xerox product is part of
the program.
Xerox DP1015 User’s Guide
39
If your product is not part of the Xerox program and you are
managing its disposal, please note that the product may contain
lead and other materials whose disposal may be regulated due to
environmental considerations. For recycling and disposal
information, contact your local authorities.
40
Xerox DP1015 User’s Guide
05-0603-000

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project