Yamaha | CL Editor | Installation guide | Yamaha CL Editor Installation Guide

CL Editor
Installation Guide
ATTENTION
SOFTWARE LICENCING AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS
BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS
OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS
SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE
SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The term
SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s
licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data
created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
• You may use the SOFTWARE on your computer(s.)
• You may make one or reasonable copies of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is
on media where such backup copy is permitted. On the backup copy, you must reproduce Yamaha’s copyright notice and any other
proprietary legends that were on the original copy of the SOFTWARE.
• You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the
recipient reads and agrees to the terms of this Agreement.
2. RESTRICTIONS
• You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE
by any method whatsoever.
• You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the
SOFTWARE.
• You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other
computers.
• You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
• You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following
restrictions which you must observe.
• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners
in public without permission of the copyright owner.
• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified
without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or
provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such
termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided
“AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY
DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED.
CL Editor Installation Guide
1
5. LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT
SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha’s total liability to you for all damages, losses and causes of action (whether in
contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data
accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must
abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY
SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any
way for the THIRD PARTY SOFTWARE or your use thereof.
• Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
• Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
• Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or
consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD
PARTY SOFTWARE.
7. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute
or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this
Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
8. COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written
materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this
Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of
Yamaha.
Special Notices
• The software and this manual are the exclusive copyrights of Yamaha Corporation.
• Please read carefully the Software Licensing Agreement at the front of this manual before installing the application.
• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of
the manufacturer.
• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for
the results of the use of this manual and the software.
• Future upgrades of application and system software and any changes in specifications and functions will be announced at the following
website. http://www.yamahaproaudio.com/
• The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the screens which
appear on your computer.
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for
your personal use.
• Windows is a registered trademark of Microsoft® Corporation in the United States and other countries.
• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
CL Editor Installation Guide
2
CL Editor
The CL Editor enables you to prepare the CL mixing console (CL5, CL3, and CL1: subsequently called CL) settings
beforehand by editing the parameters offline, and also remotely monitor/control the CL online.
Installing the Software
Procedures
1
Verify that your system meets the operating requirements of each software program.
page 4
2
Install the Editor.
page 4
3
Configure the network settings.
page 6
For subsequent operations, refer to the PDF manual from the [HELP] menu in software program.
CL Editor Installation Guide
3
Software installation
Minimum System Requirements
The system requirements below may differ slightly depending on the particular operating system.
OS
Windows 7
Mac OS X
: Ultimate/Professional/Home Premium
: 10.6.x/10.7.x
Hard Disk
100MB or more
Display
1024 x 768 pixels or higher (recommend 1440 x 900 pixels or higher);
High Color (16-bit) or higher
Other
Pointing device such as a mouse, Ethernet (100BASE-TX/10BASE-T) port
Windows 7
CPU
32bit: 2GHz or higher Intel Core/Pentium/Celeron family processor
64bit: Intel 64 compatible processor (however the software program runs at 32bit)
Available Memory
1GB or more (2GB or more on 64-bit Version)
Mac OS X
CPU
Intel Core family processor
Available Memory
1GB or more (2GB or more on 10.7.x)
NOTE The Minimum System Requirements described above are applied to the CL Editor version 1.0.0. Keep in mind that the software is often
updated and the system requirements are subject to change. You can check the latest version information of each program and its
system requirements at the following website
http://www.yamahaproaudio.com/
The system requirements may differ slightly depending on the particular computer.
Installing software
To use CL Editor, you’ll not need to install the other software program besides CL Editor. Follow the appropriate
instructions below.
CL Editor Installation
Follow the instructions below to install the software programs.
1
Double-click “setup.exe” (Windows) or “Install CL Editor.pkg” (Mac) in the compressed file (you
have downloaded).
A setup dialog of CL Editor is displayed.
NOTE When using Windows, if the “User Account Control” window appears, click [Continue] or [Yes].
2
Follow the on-screen instructions to install the software.
NOTE For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in program.
CL Editor Installation Guide
4
Connecting the computer to the CL
The following diagram shows how to connect the computer to the CL through a dedicated network.
LAN cable
CL Editor
LAN cable
Network switch
or
LAN cable
Computer
CL console
Network connector
NOTE You cannot simultaneously control one CL unit from two computers running CL Editor. However, you can control the CL unit using CL
Editor on a computer along with the CL StageMix application installed on an iPad (or iPad2) that is connected via WiFi.
CL Editor Installation Guide
5
Network Settings
When you connect the computer to the CL through a dedicated
network
• Settings of the CL
You can use the following initial settings.
IP address
192.168.0.128
Gateway address
192.168.0.1
Subnet mask
255.255.255.0
• Settings of the computer
We recommend that you make the following settings.
IP address
192.168.0.100
Subnet mask
255.255.255.0
Default gateway (Router)
192.168.0.1
When you connect the computer to the CL in the existing network
Make the network settings of the CL and your computer in accordance with your LAN. Please contact your network
administrator for further details. For specific instructions and caution for connecting the CL to LAN, please refer to
the following web site:
http://www.yamahaproaudio.com/
• Settings of the CL
IP address
Set the IP address so that it does not conflict with the IP address of any other device on
the network.
Gateway address
Set the IP address of the gateway when the gateway exists. Set the vacant address
when the gateway does not exist. The address should be set in the same subnet as IP
address within LAN in which the subnet is set.
Subnet mask
Set the subnet mask of the subnet connected to the CL.
CL Editor Installation Guide
6
TCP/IP Settings
When using Windows 7
1
Select [Start]➔[Control Panel], then click or double-click [Network and Sharing Center] or [View
network status and tasks].
The “Network and Sharing Center” is displayed.
2
Click [Manage network connection] or [Change Adapter settings] from the “Tasks” list located
in the left side of “Network and Shareing Center” window, then double-click [Local Area
Connection].
The “Local Area Connection Status” dialog box will be displayed.
NOTE The “User Account Control” dialog box may appear. Click [Continue].
NOTE If the “Local Area Connection properties” dialog box appears, skip ahead to step 4.
3
Click [Properties].
The “Local Area Connection properties” dialog box will be displayed.
NOTE The “User Account Control” dialog box may appear. Click [Continue].
4
Select [Internet Protocol Version 4(TCP/IPv4)], then click [Properties].
The “Internet Protocol Version 4(TCP/IPv4) Protocol” dialog box will be displayed.
5
Click [Use the following IP address].
6
Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default
gateway], and “255.255.255.0” into [Subnet mask].
NOTE Please contact your network administrator for these settings when you connect the computer to the CL in the existing network.
7
Click [OK].
8
Restart your computer.
When using Mac OS X
1
Click the [System Preferences] icon on Dock.
The “System Preferences” window appears.
2
Click the [Network] icon.
The “Network” window appears.
3
Click [Ethernet].
The Ethernet settings appears.
NOTE If there are multiple Ethernet choices, select the one that is connected to the device.
4
Select [Manually] in [Configure IPv4] or [Configuration]. Input the IP address of the computer in
[IP Address], “255.255.255.0” in [Subnet Mask], and the IP address of the router (gateway) in
[Router] individually.
NOTE Please contact your network administrator for these settings when you connect the computer to the CL in the existing network.
5
Click [Apply].
The network settings are applied.
CL Editor Installation Guide
7
Uninstall (removing the installed application)
To remove the installed Editor:
When using Windows 7
Select [Start]  [Control Panel]  [Programs and Features] or [Uninstall a program], then select the application to
be removed and click [Uninstall/Change].
Follow the on-screen instructions to uninstall the application.
If the “User Account Control” window appears, click [Continue] or [Yes].
When using Mac OS X
Double-click “Uninstall CL Editor.app” in the downloaded folder. After a dialog opens, follow the on-screen
instructions to uninstall the application.
Troubleshooting
When controlling the CL from your computer via LAN, the CL does not operate correctly.
• Is the LAN cable connected correctly?
Connect the computer to the CL by using a LAN cable via a network switch or router.
When you connect the computer to the CL directly, you use a LAN cable.
.......................................................................................................................................................................................... page 5
• Is the computer network setup appropriate?
Please confirm the computer network settings (IP address, Subnet mask).
• Are the settings (IP address, Gateway address, Subnet mask) of the CL and network devices (including network
switches) appropriate?
............................................................................................................................ CL’s Manual, Network device’s Owner’s Manual
• Is the Network setup (IP address) of the System Setup window in the CL Editor appropriate?
.............................................................................................................................................................. CL Editor Owner’s Manual
• Is the firewall / an anti-virus software (security function) enabled?
In that case, you might experience problems controlling CL console.
C.S.G., Pro Audio Division
© 2012 Yamaha Corporation
204IP-A0
CL Editor Installation Guide
8
Download PDF

advertising