Yamaha | MSR100 | Data Sheet | Yamaha MSR100 Data Sheet

MSR Series
MSR800W
MSR100
MSR100 Rear Panel
MSR800W Rear Panel
All-in-one sound solutions that are powerful, versatile, and reliable.
MSR100
MSR800W
range and clarity.
• Built-in mixer with 3 inputs and master EQ for sound
control.
• "Input 1" XLR connector accommodates almost any
microphone or line input (with a -50dB/+4dB pad
switch), while line sources can be connected to the
"Input 2" and "Input 3" phone-jack connectors.
• Link out jack can be used to connect multiple units for
higher power and expanded coverage.
• Mounting options allow pole mounting, ceiling
suspension, or wall mounting.
powerful built-in amplifier delivers solid lows with up
to 800 watts (burst; 500 watts continuous).
• Thru and high-pass outputs for flexible system
integration.
• Variable 80~100 Hz high-pass filter.
• LED peak indicator.
• 100-watt power amplifier delivers outstanding dynamic
OPTIONS (MSR100)
BCS251
Ceiling Bracket
BWS50-190/260
Wall Bracket
BBS251
Baton Bracket
• A bass reflex enclosure housing a 15-inch woofer and
MSR100
GENERAL SPECIFICATIONS
Type
Bass-reflex type, Powered speaker
Frequency response
Nominal coverage @-6dB
(Horizotal x Vertical)
55Hz to 20kHz
Max SPL
112dB SPL (1m)
Components
LF:8" cone
HF:1" driver + horn
Max. output power
100W
Control
Input terminal
MIC Level, LINE Level x 2, Master level, Equalizer (HIGH/LOW)
Input 1 (MIC /LINE switch): XLR-3-31 type (-50dB/+4dB, 10kΩ)
Input 2,3: Phone jack (-10dB, 10kΩ)
Output terminal
LINK Output: Phone jack (-10dB,10kΩ,Pre-EQ)
Dimensions (W x H x D)
Weight
275 x 455.5 x 255mm (10.8" x 17.9" x 10.0")
11.0kg (24.3lbs)
Power consumption
70W
Power requirements
AC120V/60Hz
AC230V/50Hz
AC240V/50Hz
DIMENSIONS
unit : mm
455.5
90 x 40
255
120
137
275
2-M8x25
MSR800W
GENERAL SPECIFICATIONS
Type
Frequency response
Max. SPL
Dimensions (W x H x D)
Weight
Pole socket
DIMENSIONS
unit : mm
Bass-reflex powered subwoofer
40Hz to 120Hz
122dB (1m)
600 x 521 x 590mm (16.0" x 25.7" x 13.8")
35
45.0kg (99.2lbs)
35mm (1-3/8inch)
Enclosure
Bass-reflex type
Components
15" cone
AMPLIFIER SECTION
Output power
Input sensitivity, impedance
Connector (Input/Output)
Control
Indicator
Power consumption
500W @100Hz, THD= 1%, RL= 8Ω
Burst power: 800W @100Hz, 20ms non-clip,RL=8Ω
+4dB, 30kΩ
Input (ch-A&B): XLR-3-31 balanced
THRU Out(ch-A&B): XLR-3-32 balanced
High Pass Out(ch-A&B): XLR-3-32 balanced
(100Hz,18dB/Oct,+4dB)
MASTER Level Control
CUT OFF FREQ. Control: 80Hz to 100Hz variable
PHASE Switch: NORM/REV
POWER Switch (ON/OFF)
Power: Green LED
Clipping: Red LED
200W
521
SPEAKER SECTION
600
590
Download PDF

advertising