Yamaha | NUAGE V1.1 | Supplementary Manual | Yamaha NUAGE V1.1 Supplementary Manual

NUAGE MASTER
NUAGE FADER
CONTROL SURFACE
Ncs500-CT
CONTROL SURFACE
Ncs500-FD
V1.1 Supplementary Manual
This supplementary manual explains features and functions that have been added or changed in TOOLS for
NUAGE V1.1.0. Please read it together with the Nuage Fader Operation Manual and the Nuage Master
Operation Manual.
Main changes
• Added the ADR mode
(Nuage Master)
page 2
• Added the functions for configuring the buttons in the USER ASSIGNABLE section
(Nuage Master, Nuage Fader)
page 3
• Added support for remote operation of the AD8HR remote preamp
(Nuage Fader)
page 4
• Added the display in the [Channel name display]
(Nuage Fader)
page 6
• Added display channels on the LCD
(Nuage Fader)
page 6
• Added some track select operations
(Nuage Master)
page 7
• Added some Zoom In and Zoom Out operations
(Nuage Master)
page 8
• Added some editing operations
(Nuage Master)
page 9
• Added other various functions
(Nuage Master)
page 9
EN
Added the ADR mode
(Nuage Master)
ADR Page
1
2
Added the ADR mode corresponding to the ADR function
of Nuendo 6.
5
3
TRANSPORT Section
Press [Display access] repeatedly to display an “ADR
page” (shown on the right), and then touch “Transport
Switch” in the [Multi function Display] to select the ADR
mode. The [Display access] indication flashes while the
ADR mode is active. To cancel the ADR mode, touch
“Transport Switch” again.
6
4
7
1 Nuendo
Opens the Marker Window in the Nuendo window.
2 User Assign
Turns the function assignments for ADR on (lit) and off.
Turns on this icon, and functions for ADR are assigned to
the [U1] – [U12] buttons in the USER ASSIGNABLE
section.
Turns off this icon, and the functions return to their
previous assignments.
1
2
The function assignments can be changed in the “User
Assignable” window of “NUAGE MASTER Setup.”
3 U1 – U12
1 [R] (Rehearse)
Plays back the take, according to the “ADR Setup”
options in Nuendo.
If you simultaneously hold down [J] and press [R], the
take is played back as “Review.”
The button indicator flashes continuously during “Review.”
Displays the function assignments for ADR. By touching
these buttons, you can execute the function assignments.
4 Time Display
[PARAM]
Displays and sets the Project Cursor position.
5 Marker Information
2 [I] (Record)
Displays the Marker information.
Plays back the take, according to the “ADR Setup”
options in Nuendo, and the overdubbing performance by
the artist is recorded.
6 Pre-Roll / Post-Roll
During “Rehearse,” “Record,” and “Review” playback, the
[Jog wheel] cannot be used.
Displays “Pre-roll” and “Post-roll” information.
7 CUE 1 – CUE 4
Selects the “CUE” that you want to control with the [Multi
function knob].
NUAGE V1.1 Supplementary Manual
2
NUMERIC PAD Section
1
Added the functions for
configuring the buttons in the
USER ASSIGNABLE section
(Nuage Master, Nuage Fader)
The function assignments can be saved, and the saved
assignments can be recalled. The functions can be
assigned to each Nuage Fader.
USER ASSIGNABLE Page
(Nuage Master)
1
2
1 [MARKER]
Selects the Marker designation. Pressing the button
toggles between “MARKER ID” and “Take Number” (for
ADR) while the pop-up window for the Marker Jump
function or Cycle Marker Jump function is shown on the
[Multi function display]. This button flashes before
inputting “Take Number.”
1 User Assign
Turns the assigned functions on (lit) and off.
If the left icon is turned on, functions assigned to U1 – U12
on the display are assigned to the [U1] – [U12] buttons.
If the right icon is turned on, functions assigned to U13 –
U24 on the display are assigned to the [U1] – [U12]
buttons.
If this icon is turned off, the functions return to their
previous assignments.
2 PANEL: U1 – U12
Displays the function assignments of the [U1] – [U12]
buttons in the USER ASSIGNABLE section.
NUAGE V1.1 Supplementary Manual
3
NUAGE MASTER Setup
To open this window, click the Nuendo menu “Devices” 
“NUAGE MASTER Setup.”
1
2
Added support for remote
operation of the AD8HR
remote preamp (Nuage Fader)
Overview
The gains of the AD8HR connected to the Nuage I/O can
be controlled.
• Press and release [PRE] on the SECTION CONTROL
section, and then press [Sub parameter 2]. This lets you
control the “HA GAIN” and “HA TRIM” of the input
channels connected to the AD8HR with the [Multi
function knob].
• Press and release the [e] (edit) button on the CHANNEL
STRIP section of the input channel connected to the
AD8HR, and then press [PRE] in the SECTION
CONTROL section. This lets you control the “HA GAIN,”
“HA TRIM,” “HA HPF,” and “HA +48V” of the channels
connected to the AD8HR with the [Multi function knob].
1 Open
Recalls the function assignments of Nuage Master.
2 Save
Saves the function assignments of Nuage Master. The
function assignment settings are saved as XML format (.xml).
NUAGE FADER Setup
To open this window, click the Nuendo menu “Devices” 
“NUAGE FADER Setup.”
1
2
3
When you assign an input bus which contains multiple
channels, such as stereo or surround, to an input channel
to control the AD8HR parameters, the parameters of the
channel listed on the top of the bus configuration (e.g.,
“Left” in the case of stereo) displayed in the “VST
Connections” window of the Nuendo are displayed.
When the parameters of all channels contained in the
same bus are not set to the same value, “*” is added to
the end of parameter name (e.g., “HA GAIN*”).
Operation
Function
1 Open
HA GAIN
Adjusts the gain.
Recalls the function assignments of Nuage Fader.
HA TRIM
Adjusts the gain trim. To adjust the gain
trim, press [Multi function button A] to
unlock the parameter.
HA HPF
Turns the High Pass Filter on and off. You
can also adjust the cut-off frequency [20 –
600 Hz].
2 Save
Saves the function assignments of Nuage Fader. The function
assignment settings are saved as XML format (.xml).
3 User Assignable Settings
Assign the functions for each Nuage Fader.
NUAGE V1.1 Supplementary Manual
4
Setting up the Nuage I/O
Operation
Function
HA +48V
Turns +48 V phantom power on and off. To
turn on phantom power, hold down the
[Multi function button A] for longer than two
seconds.
Open the “Nuage I/O Properties” from the NUAGE
Workgroup Manager, and then set the “ID” number of the
AD8HR.
To use this function, make sure to perform the following:
• Hardware connections
• Setting up the serial port
• Setting up the Nuage I/O
Hardware connections
Nuage I/O
Computer
AES/EBU
RS-232C
AD8HR
Connect the AD8HR and Nuage I/O by AES/EBU, and
connect the AD8HR and a computer by the RS-232C
(cross cable).
Use a USB to Serial converter if there is no serial port in
your computer.
Setting up the serial port
The AD8HR can also be set up in NUAGE HA Remote
Setup. To open NUAGE HA Remote Setup, click the
Nuendo menu “Devices”  “NUAGE HA Remote Setup.”
Make the following serial port settings on your computer:
Parameter
Value
Bits per second:
38400
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
None
Instructions for making serial port settings are depend on
your particular computer (in Windows 7, for example,
right-click an applicable serial port on the “Device
Manager” to open the properties). Refer to the manual of
your computer for details.
NUAGE V1.1 Supplementary Manual
5
Added the display in the
[Channel name display]
(Nuage Fader)
Added display channels on
the LCD (Nuage Fader)
The whole name of the channel strip can be scrolled and
displayed, and the display format can be changed.
When there is a long undisplayed portion of a channel
strip name, the whole name of the selected channel strip
can be scrolled and displayed only once if the channel
strip is selected or the channel is scrolled using the
[Touch slider bar].
NUAGE FADER Setup
The previous view can be called up after using the Agent
function ([SEL CH], etc.), and you can scroll through and
display the selected channels when the desired channel
is not shown on the exterior of LCD. Also, you can select
whether to display a channel from the left of the end of the
console(s), or to display from the right of the end of the
console(s).
CHANNEL VIEW CONTROL
Section
To open this window, click the Nuendo menu “Devices” 
“NUAGE FADER Setup.”
1
1
2
3
1 Disp Mode
Selects the display format of a [Channel name display].
1 [EVENT ON TR] / [EVENT CYCLE] /
[PLAYING CH] / [SEL CH] / [EXPAND] /
[ALL CH]
“Disp Mode” can also be set up in the “SETUP page” of
Nuage Master (page 9).
If the same button is pressed once again while displaying
the channel corresponding to each button, the display will
return to the previous view.
However, while the Project Cursor is moving, even if you
press [EVENT CYCLE] or [PLAYING CH], the display does
not return, but an agent function is performed again
instead.
If you press one of these buttons to return while holding
down [ALT], the leftmost channel is displayed there even
after returning. This function is convenient when you are
looking for a specific channel using an agent function.
2 [SEL CH]
If you press [SEL CH] while holding down [ALT], the
selected channel is displayed when the channel is not
displayed on the exterior of LCD.
NUAGE V1.1 Supplementary Manual
6
3 [L] / [R] (left/right)
If you use the following functions when the channels
displayed are fewer than the number of faders of the
Nuage Fader (e.g., when you are using the Agent
function, etc.), you can operate adjacent channels.
Operation
Function
Simultaneously holding down
[SHIFT] and pressing [L]
Displays channels from the left
end of the console(s).
Simultaneously holding down
[SHIFT] and pressing [R]
Displays channels from the right
end of the console(s).
Simultaneously holding down
[ALT] and pressing [R]
Selects the Free Scroll mode.
In the Free Scroll mode, the
channel which was fixed to the
left end or the right end can also
be moved by the [Touch slider
bar].
Simultaneously holding down
[ALT] and pressing [L]
Cancels the Free Scroll mode.
Added some track select
operations (Nuage Master)
Tracks can be selected by the NUMERIC PAD, and
multiple tracks can be selected.
NUMERIC PAD Section
1
MODIFIER Section
1 [PARAM]
Added Track Select to the function switched in Parameter
mode.
The size of the “Mixer” window on the LCD can be
changed by simultaneously holding down [SHIFT],
[CTRL], and [ALT], and using the [Multi function knob].
Operation
Function
SCRN LEFT
Adjusts the left position of a “Mixer”
window.
METER HEIGHT
Adjusts the height of a meter.
SCRN RIGHT
Adjusts the right position of a “Mixer”
window.
Select Track function
In the Select Track function, you can select tracks by
inputting the track number. To input the track number,
press any one of the buttons in NUMERIC PAD section
(other than [ESC]) to call up a pop-up window on the
[Multi function display].
1
2
1 Track
Inputs the track number.
2 Track List
Displays the track list. Selected candidate tracks are
highlighted.
NUAGE V1.1 Supplementary Manual
7
When the Select Track pop-up window is shown, the
[input keys] have the following functions.
[Input keys]
Function
[0] – [9]
Inputs the track number to the input position.
[BACK SPACE]
Deletes the number at the input position.
[CLEAR]
Deletes all input numbers.
[SET]
Selects the Set mode (the button lights).
[PREV -]
Selects the previous track number.
[NEXT +]
Selects the next number.
[CYCLE .]
To select the additional track, input the
number continuously after pressing this
button.
[ESC]
Cancels the input then closes the pop-up
window.
[ENTER]
Determines the input then closes the pop-up
window.
Added some Zoom In and
Zoom Out operations
(Nuage Master)
Some Zoom-related operations were added.
JOG WHEEL Section
GENERAL CONTROL Section
1
1 [ZOOM]
If you turn the [JOG WHEEL] while holding down [SHIFT]
and [ALT], you can zoom in/out of waveform displays.
1
If you turn the [JOG WHEEL] while holding down [CTRL]
and [ALT], the selected track height changes.
GENERAL CONTROL Section
1 []/[] (up/down)
To select multiple tracks, simultaneously hold down
[SHIFT] and press [] or [].
1
1 []/[] (up/down)
If you press [] while holding down [CTRL], the selected
track height becomes narrow.
If you press [] while holding down [CTRL], the selected
track height becomes large.
NUAGE V1.1 Supplementary Manual
8
Added some editing
operations (Nuage Master)
The waveform offset can be changed, and the cut/copied
event(s) can be pasted maintaining the position relative to
the Project Cursor.
2 Numeric Pad Input
Selects the input format when you set the Project Cursor
position in the Locate function. If you set this to “Right,”
you can input the Project Cursor position as a text.
DYN Page
EDIT Section
1
2
1
2
1 Title Bar
Turns the “Bypass” switch that you touch on (lit) and off.
2 Parameters
1 [MOVE]
When the Object Selection Tool is selected, if you turn the
[JOG WHEEL] while holding down [SHIFT] and [ALT], the
waveform offset of the selected track can be changed.
2 [PASTE]
When the Object Selection Tool is selected, if you press
[PASTE] while holding down [SHIFT], the cut/copied
event(s) can be pasted maintaining the position relative to
the Project Cursor.
Displays each processor's parameters. The parameters
that you touched can be controlled with the [Multi function
knob].
If you press the rightmost [Multi function knob] when
“Comp” is selected, the related parameters are displayed
in graph form. To return to the previous view, press the
[Multi function knob] again.
TRANSPORT Page
MAIN Page
Added other various functions
(Nuage Master)
1
SETUP Page
1 Lock/Unlock
Lock (lit) or unlock “CLICK” and “TEMPO.”
If you lock these parameters, they cannot be controlled.
1
2
1 Disp Mode
Selects the display format of a [Channel name display].
NUAGE V1.1 Supplementary Manual
9
Yamaha Pro Audio global web site:
http://www.yamahaproaudio.com/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
C.S.G., Pro Audio Division
© 2013 Yamaha Corporation
307MW-A1
Download PDF

advertising