SC-602E SC-602F SC-802F SC-62 SE

SC-602E SC-602F SC-802F SC-62 SE
OEM SYSTEMS CEILING & IN-WALL SPEAKER - GOOD
The ArchiTech Premium line is very well engineered... to sound great, be dependable and to deliver great value
for the dollar. It has been engineered with high quality materials and careful design:
The long-throw woofer is made with a polypropylene cone and butyl rubber surround, (not a cheap foam
surround), enabling it to create substantial low bass yet remarkably durable (lifetime warranty).
The tweeter is a 3/4” polycarbonate hybrid dome that is clean and accurate and pivots for best dispersion into the room. The crossover is technically a 2nd and
3rd order electro-acoustic crossover. This ensures the tweeter and woofer are well-controlled and deliver broad, smooth frequency throughout the room.
SC-602E
6-1/2" 2-way In-Ceiling Loudspeaker
FEATURES
• Poly woofers with butyl rubber surrounds
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped in pairs (BULK PACK)
• Overall Dimension: 8 3/8”
• Cut-out Dimensions: 7 3/8” X 27/8” deep
SC-602F
6-1/2" 2-way In-Ceiling / Wall Loudspeaker
FEATURES
• Frameless Grille
• Poly woofers with butyl rubber surrounds
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped in pairs
• Overall Dimension: 8-7/16" R
• Cut-out Dimensions: 7-1/4" R x 3 5/16" deep
SC-802F
8" 2-way In-Ceiling / Wall Loudspeaker
FRAMELESS
FEATURES
• Frameless Grille
• Poly woofers with butyl rubber surrounds
• Proven Mounting System
• Frame and Grilles may be painted to
match mounting surface
• Sold and shipped in pairs Overall Dimensions:
9-7/8" Round
Cut-out Dimensions:
8-5/8" Rd x 3-7/8" dp
SC-62
6-1/2" 2-way In-Ceiling Loudspeaker
FEATURES
• Poly woofers with butyl rubber surrounds
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped in pairs (BULK PACK)
• Overall Dimension: 8 3/8”
• Cut-out Dimensions: 7 3/8” X 27/8” deep
SE-791E
6-1/2" 2-way In-Wall Loudspeaker
FEATURES
• Poly woofers with butyl rubber surrounds
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped in pairs (BULK PACK)
• Overall Dimension: 8-5/8" W x 12-1/8" H
• Cut-out Dimen.: 7-3/8" W x 10-7/8" H x 3-1/8" D
page 46
SPECIFICATIONS
Loudspeaker Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Frameless Grille:
Round Model:
Model:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Frameless Grille:
45Hz - 20kHz ± 3 dB
40 watts nom. 80 max.
91dB 1 watt / 1 meter
3/4" pivoting dome tweeter
MGR-6
8 ohms nominal
RIR-6
VPD-6
PB-6
PE-8
45Hz - 20kHz ± 3 dB
40 watts nom. 80 max.
91dB 1 watt / 1 meter
3/4" pivoting dome tweeter
Magnetically Attached - Perforated
Frameless Metal Grilles
Round and Square option
MGR-6f Square
MGS-6f
8 ohms nominal
RIR-6
VPD-6
PB-6
PE-8
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
35Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
91dB 1 watt / 1 meter
3/4" pivoting dome tweeter
Magnetically Attached - Perforated
Frameless Metal Grilles
Round and Square option
Round: MGR-8f Square: MGS-8f
8 ohms nominal
RIR-8
VPD-8
PB-8
PE-8
SPECIFICATIONS
Loudspeaker Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
45Hz - 20kHz ± 3 dB
40 watts nom. 80 max.
91dB 1 watt / 1 meter
3/4" pivoting dome tweeter
MGR-6
8 ohms nominal
RIR-6
VPD-6
PB-6
PE-8
SPECIFICATIONS
Loudspeaker Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
45Hz - 20kHz ± 3 dB
40 watts nom. 80 max.
91dB 1 watt / 1 meter
3/4" pivoting dome tweeter
MGR-6
8 ohms nominal
RIR-6
VPD-6
PB-6
PE-8
NATIONWIDE (800) 262-7818 • LOCAL (562) 926-5758 • FAX (562) 926-7270
OEM SYSTEMS CEILING & IN-WALL SPEAKER - GOOD
SE-891E
8" 2-way In-Wall Loudspeaker
FEATURES
• Poly woofers with butyl rubber surrounds
• Industry Leading Superior Clamp-Ring
Mounting System
• IR knockout
• Poly-switch overdrive protection
• 12 dB/octave crossover
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped in pairs
SE-80SWF
8” In-Wall / Ceiling Subwoofer
Frameless
FEATURES
• Frameless Grille
• Frameless Grille finished look is identical to
our 8” frameless series speakers
• Poly woofers with butyl rubber surrounds
• Proven Mounting System
• Grilles - Paint to match mounting surface
• Sold and shipped individually
• Overall Dim.:
9-7/8” diam.
• Cut-out Dim. (deep): 8-5/8” diam. x 3-7/8”
Overall Dimensions:
Cut-out Dimensions:
10-1/2” W x 14-1/2” D
9” W x 13” H x 2-15/16” D
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome:
35Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
91dB 1 watt / 1 meter
1” pivoting textile dome tweeter
MG-89F
8 ohms nominal
RIB-82
VPD-82
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Impedance:
Frameless Grille:
Frameless Metal Grilles
Round and Square option
Round Model:
Square Model:
Pre-construction Bracket: RIR-8
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
30Hz - 120Hz
100 watts nom. 150 max.
85 dB 1 watt / 1 meter
4 ohms nominal
Magnetically Attached - Perforated
MGR-8f
MGS-8f
VPD-8
PB-8
PE-8
OEM SYSTEMS CEILING & IN-WALL SPEAKER - BETTER
The Kevlar material used in the ArchiTech Kevlar series is an exceptional choice for high performance woofers.
Its incredible strength enables low distortion music reproduction, while its lightness provides great detail and
musicality. And it is amazingly durable for long life and environmental stability. Kevlar is 5 times as strong as
steel of the same weight.
These unique properties have enabled Kevlar to become a favorite material for applications as varied as bullet-proof vests, automotive parts, ropes for the Mars
Pathfinder mission - and for the ArchiTech Series - cones for superb woofers.
The ArchiTech Kevlar Series is an excellent choice for custom installation applications where high quality music reproduction is required and rugged construction is appreciated. The Lifetime Limited Warranty is one indication of just how robust this family of loudspeakers really is.
SC-620F
6.5” In-Wall / Ceiling Subwoofer
Frameless
FEATURES
• Frameless Grille
• 12 dB/octave crossover
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped pairs
• Overall Dim.:
8-7/16” diam.
• Cut-out Dim. (deep): 7 1/4” diam. x 2-7/8”
SC-820F
8” In-Wall / Ceiling Subwoofer
Frameless
FEATURES
• Frameless Grille
• 12 dB/octave crossover
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped in pairs
• Overall Dimensions:
9-7/8” R
• Cut-out Dimensions: 8-5/8” R x 3-7/8” D
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Impedance:
Frameless Grille:
Round and Square option
Round Model:
Square Model:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Frameless Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
45Hz - 20Hz -± 3dB
40 watts nom. 80 max.
91 dB 1 watt / 1 meter
8 ohms nominal
Magnetically Attached - Perforated
Frameless Metal Grilles
MGR-6f
MGS-6f
RIR-6
VPD-6
PB-6
PE-6
35Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
91dB 1 watt / 1 meter
1” pivoting textile soft dome tweeter
Magnetically Attached - Perforated
Frameless Metal Grilles• Round option:
MGR-8f Rectangular Optional: MGS-8f
8 ohms nominal
RIR-8
VPD-8
PB-8
PE-8
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270 page 47
OEM SYSTEMS CEILING & IN-WALL SPEAKER - BETTER
SC-622F
6-1/2” 2-way Single Point Stereo
In-Ceiling / Wall
Frameless
FEATURES
• Frameless Grille. Look is identical to
our 8” frameless series speakers
• Poly woofers with butyl rubber surrounds
• Proven Mounting System
• Grilles - Paint to match mounting surface
• Sold and shipped individually
• Overall Dimensions:
8-7/16” R
• Cut-out Dimensions: 7-1/4” R x 3-5/16” D
SE-LCR-Sf
Dual 5-1/4" 2-way In-Wall Loudspeaker
Frameless Center / All Channel - LCRS
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• 12 dB/octave crossover
• Phase plug pole piece extensions
• IR Knockouts
• High temperature Polyimide voice coils
• Polyswitch overdrive protection
• Superior retro-ring mounting system
• Magnetic, frameless, micro-perforated, vibration-free grille
SE-790KE
6-1/2” 2-way In-Wall Loudspeaker
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• 12 dB/octave crossover
• Phase plug pole piece extensions
• IR Knockouts
• High temperature Polyimide voice coils
• Polyswitch overdrive protection
• Superior clamp-ring mounting system
• Magnetically Shielded
• Orient Vertically or Horizontally
SE-893KE
8” 3-way In-Wall Loudspeaker
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• 12 dB/octave crossover
• Phase plug pole piece extensions
• IR Knockouts
• High temperature Polyimide voice coils
• Polyswitch overdrive protection
• Superior clamp-ring mounting system
• Frame/Grille paint to match mounting surface
• Sold and shipped in pairs
Overall Dimensions:
10-1/2” W x 14-1/2” H
page 48
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Frameless Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
45Hz - 20kHz ± 3 dB
40 watts nom. 80 max.
91dB 1 watt / 1 meter
Dual (L+R) 3/4” dome tweeters
Magnetically Attached - Perforated
Frameless Metal Grilles• Round option:
MGR-6f Rectangular Optional: MGS-6f
8 ohms nominal
RIR-6
VPD-6
PB-6
PE-8
• Orient Vertically or Horizontally
• Sold and shipped individually
• Overall Dimensions:
• Cut-out Dimensions:
9” W x 15-3/4” H
7-7/8” W x 14-7/16” H x 3-1/2” D
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Frameless Grille:
Impedance:
Pre-construction Bracket:
45Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
90dB 2.83V 1 watt / 1 meter
1” pivoting textile soft dome tweeter
Magnetically Attached, MicroPerforated - MG-LCRSf
8 ohms nominal
RIB-LCR
• Frame/Grille Paint to match mounting surface
• Sold and shipped in pairs
• Overall Dimensions:
8-5/8” W x 12-1/8” H
• Cut-out Dimensions:
7-3/8” W x 10-7/8” H x 3-1/8” D
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Cut-out Dimensions:
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Frameless Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
45Hz - 20kHz ± 3 dB
40 watts nom. 80 max.
91dB 1 watt / 1 meter
1” pivoting textile soft dome tweeter
MG-79F
8 ohms nominal
RIB-7
9” W x 13” H x 3-1/4” D
35Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
91dB 1 watt / 1 meter
1” pivoting textile soft dome tweeter
Magnetically Attached - Perforated
Frameless Metal Grilles• Round option:
MGR-8f Rectangular Option: MGS-8f
8 ohms nominal
RIR-8
VPD-8
PB-8
PE-8
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270
OEM SYSTEMS CEILING & IN-WALL SPEAKER - BEST
Presence represents a new level of performance and value in In-Wall and Ceiling loudspeakers.
Our signature Lifetime Limited Warranty ushers in these straight forward no-nonsense loudspeaker systems.
Practical engineering and the best materials available are present throughout this comprehensive and well
thought-out product line. The Presence line is known namely by it Kevlar woven fiber woofers with butyl rubber surrounds & ferro-fluid cooled silk dome tweeters. Midrange drivers, thick fiberglass crossover network PC boards populated with high-grade electronic
components, over-drive tweeter protection, heavy gauge oxygen-free copper wiring and stout gold plated high tension connection terminals are other features of the Presence line.
A-606
6-1/2” 2-way In-Ceiling Loudspeaker
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• High temperature Polyimide voice coils
• High-grade crossovers
• Polyswitch overdrive protection
• Proven Mounting System
• Frame/Grille Paint to match mounting surface
• Sold and shipped in pairs
• Overall Dimensions:
8-3/8” R
• Cut-out Dimensions: 7-3/8” R x 2-7/8” D
A-808
8” 2-way In-Ceiling Loudspeaker
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• High temperature Polyimide voice coils
• High-grade crossovers
• Polyswitch overdrive protection
• Proven Mounting System
• Frame/Grille Paint to match mounting surface
• Sold and shipped in pairs
• Overall Dimensions:
9-3/4” R
• Cut-out Dimensions: 8-5/8” R x 3-3/8” D
A-SP6
6-1/2” 2-way Single Point Stereo In-Ceiling
Loudspeaker
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• High temperature Polyimide voice coils
• High-grade crossovers
• Polyswitch overdrive protection
• Proven Mounting System
• Frame/Grille Paint to match mounting surface
• Sold and shipped in pairs
• Overall Dimensions:
8-3/8” R
• Cut-out Dimensions: 7-3/8” R x 2-7/8” D
A-LCRS
Dual 5-1/4” 2-way In-Wall Loudspeaker
Center / All Channel - LCRS
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• High temperature Polyimide voice coils
• Phase plug pole piece extensions
• IR Knockouts
• High-grade crossovers
• Polyswitch overdrive protection
• Superior Clamp-ring Mounting System
• Magnetically Shielded
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
45Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
91dB 1 watt / 1 meter
1” Silk soft dome pivoting tweeter
MGR-6
8 ohms nominal
RIR-6
VPD-5
PB-6
PE-8
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
35Hz - 20kHz ± 3 dB
60 watts nom. 120 max.
91dB 1 watt / 1 meter
1” Silk soft dome pivoting tweeter
MGR-8
8 ohms nominal
RIR-8
VPD-8
PB-6
PE-8
SPECIFICATIONS
Frequency Response:
Power Handling:
combined
Sensitivity:
Tweeter:
tweeters
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
45Hz - 20kHz ± 3 dB
50 watts nom. 100 max. both channels
91dB 1 watt / 1 meter
Dual (left & right) 3/4” Silk soft dome
MGR-622
8 ohms nominal
RIR-6
VPD-6
PB-6
PE-8
• Orient Vertically or Horizontally
• Frame/Grille Paint to match mounting surface
• Sold and shipped individually
• Overall Dimensions:
9” x 15-3/4”
• Cut-out Dimensions:
7-7/8” x 14-7/16” x 3-1/2” D
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
45Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
91dB 1 watt / 1 meter
1” Silk soft dome pivoting tweeter
MG-LCR
8 ohms nominal
RIB-LCR
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270
page 49
OEM SYSTEMS CEILING & IN-WALL SPEAKER - BEST
6-1/2” 2-way In-Wall Loudspeaker
• Sold and shipped in pairs
• Overall Dimensions:
• Cut-out Dimensions:
9-1/16” W x 12-3/4” H
8” W x 11-3/4” H x 3-1/4” D
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• High temperature Polyimide voice coils
• Phase plug pole piece extensions
• IR Knockouts
• High-grade crossovers
• Polyswitch overdrive protection
• Superior Clamp-ring Mounting System
• Frame/Grille Paint to match mounting surface
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
45Hz - 20kHz ± 3 dB
50 watts nom. 100 max.
91dB 1 watt / 1 meter
1” Silk soft dome pivoting tweeter
MG-62
8 ohms nominal
RIB-62
8” 2-way In-Wall Loudspeaker
• Sold and shipped in pairs
• Overall Dimensions:
• Cut-out Dimensions:
10-1/2” W x 14-1/2” H
9” W x 13” H x 3-1/4” D
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• High temperature Polyimide voice coils
• Phase plug pole piece extensions
• IR Knockouts
• High-grade crossovers
• Polyswitch overdrive protection
• Superior Clamp-ring Mounting System
• Frame/Grille Paint to match mounting surface
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket: RIB-82
Vapor Dome:
A-8LCRS
• Overall Dimensions:
• Cut-out Dimensions:
12-7/8” R
11-1/2” R x 5-3/4” D
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
35Hz - 20kHz ± 3 dB
60 watts nom. 120 max.
91dB 1 watt / 1 meter
1” Silk soft dome pivoting tweeters
MGR-815
8 ohms nominal
RIR-815
A-650
A-820
8” 2-way 15 Degree Angled Loudspeaker
FEATURES
• Woven Kevlar® woofers with butyl rubber surrounds
• High temperature Polyimide voice coils
• High-grade crossovers
• Polyswitch overdrive protection
• Proven Mounting System
• Frame/Grille Paint to match mounting surface
• Sold and shipped individually
35Hz - 20kHz ± 3 dB
60 watts nom. 120 max.
91dB 1 watt / 1 meter
1” Silk soft dome pivoting tweeter
MG-89F
8 ohms nominal
VPD-82
ENDEAVOR OUTDOOR SPEAKERS
FEATURES
• Sealed, port-less design enclosure
for bug and moisture prevention.
• The IO-505, 605 and 805 include
Indoor / outdoor bass equalization
• Versatile mounting options: standard type “U” bracket, mounting
bosses on rear for optional double
swivel mounting brackets
• Suitable for use on book shelves
with bracket-less finished look
SPECIFICATIONS
IO-505
• Rust proof Perforated
Aluminum Grille; epoxy
painted for long life in high
humidity and salt/air environments. Cabinets, grilles
and mounting brackets are paintable to match your decor.
• Available in White (W) or Black (B)
• Sold and shipped in pairs
IO-605
IO- 805
Size/Type:
5-1/4” 2-way Kevlar
6-1/2" 2-way Kevlar
8" 2-way Kevlar
Frequency Response:
40Hz - 21kHz ± 3 dB
38Hz - 21kHz ± 3 dB
35Hz - 21kHz ± 3 dB
Power Handling:
50 watts nom. 100 max
60 watts nom. 120 max
70 watts nom. 140 max
Sensitivity:
87dB 1 watt / 1 meter
88dB 1 watt / 1 meter
89dB 1 watt / 1 meter
Tweeter:
1" Tetoron® soft dome pivoting
1" Tetoron® soft dome pivoting
1" Tetoron® soft dome pivoting
Impedance:
8 ohms nominal
8 ohms nominal
8 ohms nominal
Dimensions:
7-1/4" W x 10" H x 7-1/2" D
8-3/4" W x 11-3/8" H x 8-5/8" D
10-5/8" W x 13-3/4" H x -10-5/8" D
With Mounting Brackets:
Increase depth by 3/4”
Increase depth by 1”
Increase depth by 1 1/4”
page 50
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270
COMMERCIAL SPEAKER APPLICATIONS
IO-570
5-1/4” 2-way Cabinet Loudspeaker
70-100 Volt / 8 ohms
Shown
in White
FEATURES
• 5-1/4” Poly woofer with butyl rubber surround
& 5-1/4” 2-way acoustic suspension loudspeaker
• Sealed, port-less design enclosure for bug and
moisture prevention.
• Baffle mounted 70-100 Volt tap selector switch
with bypass setting for 8-ohm applications
• Versatile mounting options: standard type “U”
bracket, mounting bosses on rear for optional
double swivel mounting brackets
• Sold and shipped individually
SC-800f
SPECIFICATIONS
Frequency Response:
Power Handling:
Sensitivity:
Tweeter:
Perforated Metal Grille:
Impedance:
Pre-construction Bracket:
8” In-Ceiling Commercial Loudspeaker
Frameless
SPECIFICATIONS
Frequency Response:
FEATURES
• Quick spring post terminals
• No Soldering or crimping required
• Dog Ear Mounting
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped individually
• Overall Dimensions:
9-7/8” R
• Cut-out Dimensions:
8-5/8” R x 3-5/16” D
• Transformer mounting dimensions: 2-3/16”
hole spacing
Power Handling:
Sensitivity:
Tweeter: (none)
Frameless Grille:
SC-800
SPECIFICATIONS
Model Number:
Frequency Response:
8” In-Ceiling Commercial Loudspeaker
FEATURES
• Quick spring post terminals
• No Soldering or crimping required
• Dog Ear Mounting
• Proven Mounting System
• Frame and Grilles may be painted to match
mounting surface
• Sold and shipped individually
• Overall Dimensions:
9-13/16” R
• Cut-out Dimensions:
8-5/8” R x 3” D
• Transformer mounting dimensions: 2-3/16”
hole spacing
SS-8M
8” High Performance Outdoor Speakers
Landscape Loudspeakers
FEATURES
• Weatherproof Design
• Includes 3 meters of cable rated for in-ground
burial (2 conductor SS-8M)
• Unit designed to be buried in-ground, approx.
8” above ground exposure
• 360 Degree Sound Field
Available in Green or
Desert Sand
• Rust proof Perforated Aluminum Grille which is epoxy painted for long life
in high humidity and salt/air environments. Cabinets, grilles and mounting
brackets are paintable to match your decor.
• Available in White (B) or Black (B)
• Overall Dimensions:
7-1/4” W x 10” H x 7-1/2” D
• With Mounting Bracket:
Increases depth by 3/4”
SS-8M MONO VERSION
• 70 volt transformer included; mounted internally with wattage taps of 16, 8, 4, & 2 Watts,
unit is shipped set at 8 Ohms
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
35Hz - 20kHz ± 3 dB
60 watts nom. 120 max.
91dB 1 watt / 1 meter
1” Silk soft dome pivoting tweeters
MGR-815
8 ohms nominal
RIR-815
60Hz - 5kHz ± 3 dB /
45Hz - 15kHz + 3 /-6dB
40 watts max.
92dB 2.83 V @ 1m
Dual Cone
Magnetically Attached - Perforated
Frameless Metal Grilles• Round and
Square option: Round: MGR-8f
Square: MGS-8f
8 ohms (70/100 V transformer available)
RIR-8
VPD-8
PB-8
PE-8
Power Handling:
Sensitivity:
Tweeter: (none)
Grille:
Impedance:
Pre-construction Bracket:
Vapor Dome / Pre-Con Bracket:
Bridge for T-Bar Ceiling:
Plenum Dome:
SC-800 - 8” Commercial Loudspeaker
60Hz - 5kHz ± 3 dB /
45Hz - 15kHz + 3 /-6dB
40 watts max.
92dB 2.83 V @ 1m
Dual Cone
Perforated Metal Grille MODEL: MGR-8
8 ohms (70/100 V transformer available)
RIR-8
VPD-8
PB-8
PE-8
• For commercial applications, 70 volt transformer setting is easily accessed
with a screwdriver
SPECIFICATIONS
Model Numbers:
Woofer:
Frequency Response:
Power Handling:
Sensitivity:
Grille:
Tweeter:
Impedance:
Available Colors:
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270
Green
SS-8MG (Green) SS-8MS (Desert Sand)
8” Polycarbonate Woofer with
butyl rubber surround
40Hz - 20kHz ± 3 dB
50 watts nom. 100 watts max.
N/A
Rust Proof Aluminum Grille keeps bugs
out of driver cavity
3/4” Dome Tweeter
8 ohms operation
Green and Desert Sand
page 51
PRO WIRE ACCESSORIES – OEM SYSTEM
IW-100WV
Indoor Rotary Volume Control
FEATURES
• Autoformer w/ rotary 12 position switch
• Smooth transition between volume steps
• 12-tap, high-grade 100-watt autoformer
• Removable Input / Output terminal strip
• Decorator wallplate included
• Sold and shipped individually
IW-IMP100WV
Indoor Rotary Volume Control
Impedance Matching
FEATURES
• Impedance Matching Autoformer w/ Rotary 12
position switch
• 1X, 2X, 4X, 8X & 16X impedance multiplier
• Smooth transition between volume steps
• 12-tap, high-grade 100-watt autoformer
• Removable Input / Output terminal strip
SPECIFICATIONS
Frequency Response:
Available Colors:
Power Handling:
Impedance:
Mounting Dimensions:
20-20 kHz +/- 0.5dB
White, Ivory & Almond
100 watts max
Optimized for 8 ohm speakers
2-5/8” depth
• Decorator wallplate included
• Sold and shipped individually
SPECIFICATIONS
Frequency Response:
Available Colors:
Power Handling:
Impedance:
Mounting Dimensions:
20-20 kHz +/- 0.5dB
White, Ivory & Almond
100 watts max
Optimized for 8 ohm speakers
2-5/8” depth
SPEAKER SELECTORS – OEM SYSTEM
GENERAL FEATURES
•This device functions as a “Switching Station” to control all the speakers in a
multi-room system from a central location.
• Barrier Termination Strip Construction provides positive wire terminations
much superior to the ‚“Quick Connect” type. This design is preferred by expe-
rienced installation experts over inferior quick connect types.
• Heavy Duty metal chassis and cases with high grade circuit boards.
• Individual on/off switches for each pair of speakers.
• Sold and shipped individually
SPECIFICATIONS
Available Colors:
Switching:
Power Handling:
SW-4SPKR
4-Speaker Selector with Amplifier Protection
Overall Dimensions:
SPECIFICATIONS
Available Colors:
Switching:
Power Handling:
SW-8SPKR
8-Speaker Selector with Amplifier Protection
Overall Dimensions:
Black
4 pair/100W RMS per channel
Rated at 100 Watts RMS per channel
(When used with Impedance Matching
Volume Controls)
8-1/2” W x 2” H x 5-1/4” D
Black
8 pair/100W RMS per channel
Rated at 100 Watts RMS per channel
(When used with Impedance Matching
Volume Controls)
8-1/2” W x 2” H x 5-1/4” D
BANANA PLUGS – OEM SYSTEM
IW-4PLUG40 & IW-4PLUG160
IW-16PLUG
Gold Plated Banana Plugs Screw-On Plugs
Gold Plated Banana Plugs Crimp-On Plugs
FEATURES
• Heavy Duty Gold Plated Banana Plugs
• Solderless Compression Screw-on Type
FEATURES
• Heavy Duty Gold Plated Banana Plugs
• Crimp-On/Solderless
DESCRIPTION
Set of four banana plugs for making one (1) four (4) conductor connection
equivalent to one (1) stereo connection. Use the IW-4PLUG with IWM-BPG or IWBG series in-wall jack plates.
DESCRIPTION
Set of 16 Crimp-on banana plugs. 8 Red & 8 Black. Use the IW-16PLUG with
the IWM-BPG, IW-BPG or IW-BG series In-Wall Jack plates.
Model IW-4PLUG: Sold with 2 Red/2 Black
IW-16PLUG sold with: 8 Red & 8 Black
IW-16PLUG128 sold with: 64 Red & 64 Black totaling 128 Plugs
IW-4PLUG40: Bag includes 20 black/20 red (total of 40 IW-4PLUG)
IW-4PLUG160: Master Pack with 80 black/80 red (total of 160 IW-4PLUGs).
page 52
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270
BOX BUDDY RINGS
MR-1
MR-CVR
Combination Speaker Locator & Single Gang
Mounting Ring
Standard J-Box Cover - Round
DESCRIPTION
Box Buddy® low voltage mounting rings are
designed for positioning low voltage devices next
to 110 VAC electrical boxes with standard NEC spacing so that the combined
110 and low voltage device(s) may be covered with one multi-gang coverplate for an elegant appearance. The Box Buddy® uses a patent pending
pull-off alignment tool that makes combined installation and alignment of
110 VAC and low voltage devices simple and quick. Box Buddy® low voltage
mounting rings feature conduit flanges off-set by 5/8” which enable unobtrusive use of conduit connectors.
FEATURES
Combination Speaker Locator & Single Gang Mounting Ring
The MR-1 is a combination speaker locator - mud ring. It utilizes a unique
group of features making it very useful & cost effective.
DESCRIPTION
The MR-CVR is a round, aluminum coverplate that is
sized exactly to fit a standard J-Box. Even the screw
holes are properly aligned to mesh correctly with a standard J-Box. The
white painted MR-CVR presents an aesthetically pleasing appearance, providing an attractive solution for covering an electrical box for a light or ceiling fixture.
FEATURES
• Standard J-Box Coverplate for MR-1
• Round Aluminum Coverplate
• Sized exactly to fit a standard J-Box
• Painted white
Sold and shipped individually
Also sold 12 to a subcarton or 96 to a case (master carton).
Sold and shipped individually
IN-WALL MEDIA PANEL
MP-8
ISF-147
In-Wall Media Panel
“Pop-Up” Nylon Loudspeaker Cover
DESCRIPTION
The MP-8 In-Wall Media Panel adds flexibility and
ease of installation to any media system job.
Requiring only an 8” x 11 3/4” opening, the MP-8
mounts with just 4 screws using our 6-1/2” speaker
frame and steel clamp ring (all included).
Sold and shipped individually
FEATURES
• 9mm Labeling System
• 378 Pre-Printed Labels
• Holds 8 Decora plates
• Steel Clamp-Ring Mounting System
• 5mm - Thick Powder-Coated, White Aluminum
• Overall Dimensions:
9-1/16” W x 12-3/4” H
• Cut-out Dimensions:
8” W x 11-3/4” H
DESCRIPTION
Protect your loudspeakers with the Insu-Flate.
The ISF-147 will protect in-ceiling loudspeakers
against abrasive insulation fibers and dust particles that can get into the
voice coil assemblies and disable your loudspeakers. This great “Pop-Up”
nylon loudspeaker cover is a simple and cost effective solution that will significantly improve your installations over the “long haul”.
FEATURES
• One size fits all
• Nylon loudspeaker cover shields speaker from insulation
• Individually packaged
• Diameter: 14”
• Height: 7”
SPEAKER BRACKETS
RIR-SERIES
Pre-Construction
Bracket Rough-In
Kit
GENERAL FEATURES
• Metal straps span 24” on centers
• Remove plastic seal when speaker is installed
• Versatile and Inexpensive
• Sold and shipped in pairs
RIR-6 for all 6-1/2” in-ceiling models
• Mouth Opening: 7-1/2” Round
• Cut-out Dimensions: 6-1/2” Round x 2-3/8” deep
FITS LOUDSPEAKER MODELS
Preference: K-625, K-62
Presence: A-606, A-SP6
ArchiTech - Kevlar Series: SC-620f, SC-622 K
ArchiTech - Premium Series: SC-602f, SC-62
RIR-8 For all 8” In-Ceiling Models
Mouth Opening:
8-5/8” Round
FITS LOUDSPEAKER MODELS
Preference: K-825d, K-82
Presence: A-808, A-SP8
ArchiTech - Kevlar Series: SC-820f, SC-822f
ArchiTech - Premium Series: SC-802f
Subwoofers: SE-80SWf
RIR-615 for all 6-1/2” 15 Degree In-Ceiling
Models
Mouth Opening: 9-1/4” round
FITS LOUDSPEAKER MODELS
Preference: K-6LCRS
Presence: A-6LCRS, PV-6LCRS
RIR-815 for all 8” 15 Degree In-Ceiling Models
Mouth Opening: 11-1/2” round
FITS LOUDSPEAKER MODELS
Preference: K-8LCRS
Presence: A-8LCRS, PV-8LCRS
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270
page 53
SPEAKER BRACKETS
RIB-SERIES
Pre-Construction Bracket Rough-In
Kit
RIB-7
GENERAL FEATURES
• Metal straps span 16” on centers
• Versatile and Inexpensive
• Remove plastic seal when speaker is
installed
• Mount Horizontally or Vertically
• Sold and shipped in pairs
RIB-7 for select 6-1/2” In-Wall Models
Mouth Opening: 7-3/8” W x 10-7/8”
RIB-62, 82
FITS LOUDSPEAKER MODELS
ArchiTech - Kevlar Series: SE-790 KE
VPD-SERIES
Pre-Construction Bracket Rough-In
Kit / Vapor Dome• Combination
Rough-In Kit Vapor Dome / Back Box
- 3 in 1 Device
VPD-6, 8
VPD-82
GENERAL FEATURES
• Metal straps span 24” on centers
• Versatile and Inexpensive
• Remove plastic seal when speaker is
installed
• Versatile and Inexpensive
• Dome / mounting flange slides along
straps for positioning at any point
between members
• Dome shields speaker from insulation
• Sold and shipped in pairs
ArchiTech - Premium Series: SE-791
OEM Models: AW-700
ArchiTech - Premium Series: SE-891E
ArchiTech - Kevlar Series: SE-893 KE
RIB-62 for select 6-1/2” In-Wall Models
Mouth Opening: 8” W x 11-3/4” H
RIB-LCR for all Dual 5-1/4” In-Wall
Models
Mouth Opening:7-7/8” W x 14-7/16” H
FITS LOUDSPEAKER MODELS
Preference: K-602
Presence: A-650
In-Wall Media Panel: MP-8
RIB-82 for all 8” In-Wall Models
Mouth Opening: 9” W x 13” H
FITS LOUDSPEAKER MODELS
Preference: K-802
Presence: A-820, A-830
FITS LOUDSPEAKER MODELS
Preference: K5LCR
Presence: A-LCRS,
PV-LCRS
ArchiTech –
Kevlar Series: SELCR KE
RIB-LCR
VPD-6 for all 6” In-Ceiling Models
Mouth Opening: 7-3/8” round
Mounting Depth: 7-1/4” deep
(works in 2 x 8 construction)
FITS LOUDSPEAKER MODELS
Preference: K-602, K-62
Presence: A-606, A-SP6
ArchiTech - Premium Series: SC-602f,
SC-62
ArchiTech - Kevlar Series: SC-620f, SC622 K
VPD-8 for all 8” In-Ceiling Models
Mouth Opening: 8-5/8” round
Mounting Depth: 7-3/4” deep
(works in 2 x 8 construction)
FITS LOUDSPEAKER MODELS
Preference: K-825d, K-82
Presence: A-808, A-SP8
ArchiTech – Kevlar Series: SC-820f, SC822f
ArchiTech - Premium Series: SC-802f
Subwoofers: SE-80SWf
VPD-82 for all 8” In-Wall Models
Mouth Opening: 9” W x 13” H
Rectangular
Mounting Depth: 3-3/8” x 3-7/8”
FITS LOUDSPEAKER MODELS
Preference: K-802
Presence: A-820, A-830
ArchiTech - Kevlar Series: SE-893 KE
ArchiTech - Premium Series: SE-891E
T-BAR BRIDGE & DOME
PB-SERIES
PE-8
T-Bar Bridge
Plenum Dome
Formed sheet metal T-bar bridge to reinforce Tbar drop ceilings for installation of all 6-1/2” and
8” round speakers with snap in PE-8 Plenum Dome (shown right) for Fire
Rated applications.
PB-6 T-bar Bridge
Hole / Cut-Out Size: 7-5/8”
Steel Plenum Dome for Fire Rated applications.
Includes EMT knock-outs for easy twist lock assembly
when using with PB-6 & PB-8. Use with T-bar bridge in
drop ceilings. Fits both the PB-6 and PB-8
Depth: 4-1/2”
PB-8 T-bar Bridge
Hole / Cut-Out Size: 8-13/16”
Need more specifications on any of the
OEM System Products?
Contact us at (562) 926-5758 or
via email at [email protected]
page 54
NATIONWIDE (800) 262-7818• LOCAL (562) 926-5758• FAX (562) 926-7270
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement