未命名 -1 - Verity Audio
VT153HD
VERY HIGH GRADE COMPONENTS
15”3-WAY FULL RANGE SPEAKER
HIGH-DEFINITION
HIGH SPL AND HIGH POWER HANDLING
AT A GLANCE
Real 900W+300W RMS power capacity (8 hours pink noise)
Top of the Line performance and reliability
Highly dynamic and holographic reproduction
Premium custom made Neodymium European drivers
Aquaplased TC4 diaphragm for ultra smooth HF reproduction
Rotatable MFH horn with silk fiber loaded cone for incredible mids
Touring grade rubberized and textured black paint finish
APPLICATIONS
The VT153HD loudspeaker system is suitable for
near field main PA reinforcement in full-range mode or
with a subwoofer, on a permanent installation or as a
portable system, for monitor in small stages, and as a
delayed filling speaker. Suitable for spaces like:
- FoH
- Multi-functional room
- Auditorium and Theater
- Bar / Pub / Nightclub
- Commercial announcements
30
© VERITY PRO AUDIO, Lille, France - all rights reserved
SPECIFICATIONS
Power Capacity / Puissance admissible (50~15000Hz pink noise 8 hours)
Nominal impedance / Impédance nominale
Frequency response / Réponse en fréquence (-6dB half space, no EQ)
Manufacturing Consistency tolerance / Tolérance de fabrication
Average Sensitivity / Sensibilité moyenne
Calculated Maximum Pressure / Pression acoustique maximale (SPL / 1m)
Nominal Directivity / Directivité nominale (-6dB)
Recommended low cut filter / Coupe bas conseillé
Low Frequency driver / Haut parleur de grave
Mid Frequency driver / Pilote de fréquences moyennes
High Frequency driver / Haut parleur d’aigu
Crossover / Filtre acoustique
Flying hardware / Équipement d’accroche
Connectors / Connectique
Floor Monitor use / Usage retour de scène
Pole mount / Support pour pieds
Cabinet / Caisse
Finish / Finition
Size / Taille (WxHxD)
Weight / Poids
900W RMS LF + 300W RMS MHF / 1800W + 600W program
8Ω LF + 8Ω MHF
45~19000Hz with recommended preset
±2dB from 300 to 10000Hz
99dB/W/m on LF + 108dB/W/m on MHF
132dB continuous / 135dB program
70º x 40º above 600Hz
30Hz 24dB/oct in full range mode,
60~100Hz with subwoofer
Custom made 15” CELTO acoustique,
Neodymium magnet, 4” voice coil
Custom made 6.5” CELTO acoustique,
Neodymium magne, 2” voice Coil, horn loaded with phase plug
1.4” exit CELTO acoustique
Neodymium magnet, 2.8” aquaplased TC4 diaphragm
Built-in only for MHF. External DSP processor required.
(recommended cut 580Hz, 24dB/oct on LF and HF)
13x M8 points
®
2x NEUTRIK Speakon NL4MP (1+/1- Input & Link for LF, 2+/2- Input & Link for MHF)
No
35mm dual pot (0 and 10 degrees angles)
CNC made with tongue and grove assembly
25 and 18mm birch plywood
Touring grade rubberized and textured black coating
445x800x442mm
35kg net, 40kg gross
VIEW
© VERITY PRO AUDIO, Lille, France - all rights reserved
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising