user manual - The Retro Family
USER MANUAL
ICE MAKER
13
PARTS BREAKDOWN DIAGRAM
TABLE OF CONTENTS
1. Back up cover
25. side strengthing board
2. Up windows
26.DC12V fan
3.Back down cover
27.Fixing clamp for cords
4. Front up cover
28. Condenser
PREPARING YOUR ICE MAKER FOR USE
5.Front down cover
29. Compressor
IMPORTANT SAFETY TIPS…………………….…………...……………….…….3
6. Down windows
30. Electromagnet valve
7. Ice scoop
31.Back panel
8. Ice Basket
32.Power supply cords
UNIT…
… … … … … … … … … … … … … … … .. … .. 4
9. Display PCB
33. Silicon pipe
OPERATING PROCEDURES & MAINTENANCE
10.Control Panel
34.Strengthen plate
UNPACKING
11. Button
35. Transformer
12. Operating surface
36. Control Box
13.Front panel
37.Storge tube
CONNECTING
14. Water filter
38. Main control PWB
MAKER … … … . … … … . … … … … … … . … … … … … .. . 6
15. Draining mounth
39. Water detecting piece
16. Draining mounth nut
40. Micro switch
17. Draining mounth cap
41. Cam
18.Silicon plug
42.Inner fixing piece
USING YOUR ICE MAKER……………….…………………..…….….……...7
19.Water Pump
43. Driving Motor
TROUBLESHOOTING … … … … … … .… . … . … … … .... … … … … .. … … … …
20.Foot
44. Ice-making box
21.Protection board
45. Binding rod
22. Cabinet
46. Ice shovel
TECHNICAL PARAMETERS & CIRCUIT DIAGRAM………..…….……..10
23.Bottom board
47. Evaporator assembly
PARTS BREAKDOWN DIAGRAM …………..……………………….….…12
24.Supplying water pipe
48. Supply for sensor
12
IMPORTANT
SAFETY
INSTRUCTIONS……………………………….….…2
GETTING
TO
KNOW
YOUR
YOUR
ICE
MAKER… … … … … … … … … … … … … … ... … … … … .. . 6
CLEANING
YOUR
AND
MAINTAINING
ICE
YOUR
ICE
MAKER… . … … … … … … .. … … … … .. 7
……9
All safety messages will tell you what the potential hazard is, tell you how
to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
This product doesn't suitable for the children and the disabled.
1
CIRCUIT DIAGRAM
IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are very important.
We have provided many important safety messages manual and your
appliance.
Always read and obey all safety massages.
This is the safety alert symbol:
!
All safety messages will follow the safety alert symbol and the word
“DANGER” or “WARNING”.
!
DANGER
!
WARNING
These words mean:
You can be killed or seriously injured if you don’t immediate follow
instructions.
TECHNICAL PARAMETERS & CIRCUIT DIAGRAM
IMPORTANT SAFETY TIPS
TECHNICAL PARAMETERS
Climate Type
Protection Type
Power
PREPARING YOUR ICE MAKER FOR USE
ST/ SN/N
I
220V~240V / 50Hz
When using electrical appliances, basic safety precautions should be followed to
reduce the risk of fire, electric shock, and injury to persons or property. Read all
instructions before using any appliance.
l
Do not operate this or any other appliance with a damaged cord. If the supply cord
Ice Making Current
0.95A
Ice Harvest Cur rent
1.25A
Refrigerant
R134a/ 60 g
Net W eight
12.5Kg
No other appliance should be plugged into the same outlet. Be sure that the plug
Blowing gas
C 5 H 10
is fully inserted into the receptacle.
Dimension
297mm × 367mm × 378mm
is damaged,it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.This ice-maker must be
positioned so that the plug is accessible.Connect to properly polarized outlets only.
l
Do not run cord over carpeting or other heat insulators. Do not cover the cord.
Keep cord away from traffic areas, and do not submerge in water.
l
We do not recommend the use of an extension cord, as it may overheat and
become a risk of fire. If you must use an extension cord, use No.14 AWG
minimum size and rated no less than 1875 watts.
l
Unplug the ice maker before cleaning or making repairs.
l
Exercise caution and use reasonable supervision when appliance is used near
children.
l
Do not use your ice-maker outdoors.place the ice-maker away from direct sunlight
and make sure that there is at least 4 inches of space between the back of your
C) Ice-Full displaying.
unit and wall.Keep a minimum distance of 4 inches on each side of you unit free
E) Button to turn on/off the cube.
l
Do not use other liquid to make the ice-cube other than water.
l
Do not clean your ice maker with flammable liqud. The fumes can create a
fire hazard or explosion.
l
Do not tip over.
l
If the ice maker is brought in from outside in wintertime, give it a few hours
to warm up to room temperature before plugging it in.
D) Power indicator.
F) Button to select the size of the ice cube.
5. Water drain cap:
For draining water from water reservoir.
6. Ice basket
TROUBLESHOOTING
PROBLEM
WARNING: This appliance must be earthed.
IMPORTANT: The wires in this mains lead are colored in accordance with
the following code:
Green and yellow:
grounding
Blue:
neutral
POSSIBLE CAUSE
“ Add Water” indicator
is on.
SOLUTION
Stop the ice maker, fill water,
Lack of Water.
and
press
“Power”
button
again to restart the unit
“Ice” indicator is on.
There is too much ice.
Remove ice from ice basket.
Stop the ice maker, and restart
Brown:
The ice cycle is too long.
live
To avoid a hazard due to instability of the appliance,it must be placed at
even or flat surface.
Ice
cubes
together.
Change the water in the inner
Water
4. Control Panel:
Easy to use, visible functions touch display setting.
A) Selected ice size displaying: Small,Medium,Large.
B) No water in the water resevior displaying:Ask you to add
water.
in
Tank. Temperature of water is
better set between 45 ℉ -90
℉ .
Ambient temperature or
Please run the ice maker
water
below 90 ℉ and pour colder
temperature
in
inner tank is too high.
water into tank.
normal but no ice is
Refrigerant
Verify
made.
leakage.
Ice
3. Ice scoop.
temperature
inner tank is too low.
With a transparent window to allow interior visibility.
2. Ice shovel.
Select the small ice cube
selection.
stick
GETTING TO KNOW YOUR UNIT
1. Cover:
it when the ice blocks melt.
making
cycle
is
Pipe
in
liquid
by
a
qualified
a
qualified
technician.
the
cooling
system is blocked.
Verify
by
technician.
the ice cube selection and the ambient temperature. In the extreme hot
room temperature. Ice-making time maybe vary a lot.
5.
While the icemaker is on, verify water level periodically. If water pump
can’t inject water, the ice maker will stop automatically, and the
“Water” indicator will be on.
Press “Power” button, fill water up to the level mark and press “Power”
again.
Allow the refrigerant liquid inside the compressor at least 3 minutes to
settle before restarting.
6.
The ice maker automatically stops working when the ice basket is full
and the “Ice” indicator will be on.
7.
Change water in the water reservoir every 24 hours to ensure a
reasonable hygiene level.
If unit isn’t in use, drain all water left in the tank.
OPERATING PROCEDURES & MAINTENANCE
shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall
outlet. Do not under any circumstances, cut or remove the third
(ground) prong from the power cord. Any questions concerning power
and/or grounding should be directed toward a certified electrician.
UNPACKING YOUR ICE MAKER
3. This appliance requires a standard 220~240 volt, 50Hz electrical outlet
1. Remove the exterior and interior packaging. Check that ice basket and
with three-prong ground.
ice scoop is included. If any parts are missing, please contact our
CLEANING AND MAINTAINING YOUR ICE MAKER
customer service.
2. Clean the interior with lukewarm water and a soft cloth. Take out the
ice basket and clean it .
3. Find a location for your ice maker that is protected from direct sunlight
and other sources of heat (i.e.: stove, furnace, radiator). Place the ice
Before using your ice maker, it is strongly recommended to clean it
thoroughly.
maker on a level surface. Maker sure that there is at least 4 inches of
1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
space between the back and sides of your ice maker and the wall.
3. Then use the water to rinse the inside parts, and drain out the water by
4. Allow one hour for the refrigerant fluid to settle before plugging ice
maker in.
unplugging the drain cap on the side.
4. The outside of the ice maker should be cleaned regularly with a mild
5. The appliance must be positioned so that the plug is accessible.
WARNING:fill with potable water only.Only use drinking water.
detergent solution and warm water.
5. Dry the interior and exterior with a soft cloth.
6. When the machine is not in use, open water drained cap to drain water
CONNECTING YOUR ICE MAKER
!
completely from water reservoir.
DANGER
DANGER
* Improper use of the grounded plug can result in the risk of
USING YOUR ICE MAKER
1.
Select the size of the ice cube by pressing the “Select” button. If the
electrical shock. If the power cord is damaged please call our
room temperature is lower than 60℉, it is recommended to select the
customer service.
small or medium ice sign button in order to avoid ice sticking together.
1. This unit should be properly grounded for your safety. The power cord
of this appliance is equipped with a three-prong plug which mates with
standard three prong wall outlets to minimize the possibility of electric
2.
Open the cover, remove the ice basket and pour water into tank.
Keep water level below the level mark.
3.
Press “Power” on the control panel to begin the ice making cycle.
4.
The ice making cycle lasts 6 to 15 minutes, depending on the size of
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement