null  null

RD35 Paver Specifications
Send
Ordering Information1
FX RDP35
Power
Color
LL
24
Options
Housing
Model
Power
Color
Optics
Voltage
Options
Housing
FX RDP35
L
H
27
30
40
LL
24
TR
C20
C30
C
T
2
Specify remote power supply separately below. 2H recommended for higher ambient light environs.
1
Trimless
(standard)
Trim
(optional - TR)
1.53”ø
(39mm)
1.77”ø
(45mm)
Luminaire
Power2
n
Round LED paver for outdoor and
indoor use
n
L = 1.2W, 3000K, 80 lm
n
H = 3W, 3000K, 250 lm
n
Even illumination lens
n
Trimless for seamless integration into
grade; optional stainless steel trim
n
n
1.53”ø
(39mm)

Concrete
housing






















4”
(100mm)
30 = 3000K
n
40 = 4000K
Sustainable design with replaceable
LED module
n
2 Step MacAdam
n
CRI: > 85
UL STD 1598, wet location; Concrete
housing: walkover rated 1500 lb;
Tiles housing: driveover rated 3000 lb
Aluminum construction, direct concrete
pour housing, with diffused tempered
glass
Supplied with oil and water resistant
1’ feed cable standard, 18/2 AWG
Optics
n
LL = line of light
Voltage
n
24 = 24VDC fixture voltage
Options
n
TR = stainless steel 304 trim,
size: 0.12” (3mm)
n
C20 = 20’(6m) feed cable
n
C30 = 30’(9m) feed cable

n
1.53”ø (39mm) x 4” H (100mm)
standard trimless
Housing
n
1.77”ø (45mm) x 4” H (100mm)
with optional trim
n
C = concrete
n
T = tiles


n
n



Snap in installation with no exposed
hardware
Size



27 = 2700K
Regressed LED for glare reduction,
louver and lens options
n

n
n
n
Color Temperature
Power Supply3 (Remote)
Non-Dim
D-520-24007: Osram 96W, 24VDC, 120-277VAC
Dim
D-520-24006: Osram 10% 0-10V dimming,
96W, 24VDC, 120-277VAC
3.9” (100mm)
6” gravel or drainage
pipe (by others)
IL-JB-LED-24003-120V-DFPN: Lutron LTE 1%
Forward Phase (with neutral) dimming, 5-40W,
24VDC, 120VAC, Case K, dry location enclosure
Conduit to splice
box (by others)
IL-JB-LED-24010-UNV-D3W: Lutron L3D 1%
3-wire dimming, 5-40W, 24VDC, 120-277VAC,
Case K, dry location enclosure
IL-JB-LED-24010-UNV-DES: Lutron L3D 1%
EcoSystem dimming, 5-40W, 24VDC, 120277VAC, Case K, supplied in a dry location
enclosure
See power supply pages for details. No enclosure, unless stated. lm80 values shown.
3
IP68
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
(rev 2)
1
RD35 Paver Specifications
Trim (optional - TR),
size: 0.12” (3mm)
Accessories
0.4” (10mm) diffused tempered glass
trimless standard
LED
Trimless
(standard)
Trim
(optional - TR)
Floor/Wall - Tiles
Concrete Installation Housing (C) (trimless shown)
Tiles/Wood Installation housing (T) (trim shown)
1.77”ø
(45mm)
1.53”ø
(39mm)
4”
(100mm)
4”
(100mm)
Conduit to splice
box (by others)
6” gravel or
drainage pipe
(by others)
Conduit to splice
box (by others)
6” gravel or
drainage pipe
(by others)
3.9”
(100mm)
1.5”
(40mm)
2
RD35 Paver Power Supplies
Single Color Drivers
Qty.
Case
Nominal Input
Voltage (V)
Nominal Input
Current (A)
Power
Factor
Output Power
Range (W)
Dimming
Mode
Dimming
Control
Dimming
Range
Location
Rating
Osram non-dim
1
120
277
0.97
0.39
0.9
1-96
N/A
N/A
N/A
Damp
D-520-24006
Osram 0-10V dim
1
120
277
0.97
0.39
0.9
1-96
PWM
0-10V
10 –100%
Damp
IL-JB-LED-24003120V-DFPN
Hi-Lume A Series
LED LTE
2
120
0.38
0.99
5-40
PWM
Forward phase
with neutral
1 –100%
Dry
IL-JB-LED-24010UNV-D3W
Hi-Lume A Series
LED L3D, 3-wire
2
120
277
0.38
0.17
0.99
0.96
5-40
PWM
3-Wire
1 –100%
Dry
IL-JB-LED-24010UNV-DES
Hi-Lume A Series
LED L3D, EcoSystem
2
120
277
0.37
0.17
0.99
0.96
5-40
PWM
Ecosystem®
1 –100%
Dry
Part Number
Description
D-520-24007
Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference).
3.0”
(76mm)
1.38”
(35mm)
4.2”
(107mm)
1.17"
(30mm)
Pout (max): 96 W
Vout: 24VDC
Iout: 0.04-4ADC
RED
White (N)
9.0”
3.5”
4.5”
supplied in dry
location enclosure
1.53”
(39mm)
96W Dim
LTE (forward phase with neutral)
Wiring Diagram for Forward Phase Control
DIM Return (-) YELLOW
Black (L)
4.9”
(124mm)
Return (-) BLUE
0-10 V DC
n.c.
Red (+)
Black (L)
White (N)
Power Supply
(non-dim)
Purple (+)
Blue (-)
Red (+)
Power Supply
(0-10V dim)
Yellow (+)
Gray (-)
Blue not connected
+V
Dimmed Hot (Black)
Hi-lume®
A-Series
Neutral (White)
LED light
engine
-V
Ground (Green)
Ground
Note: Colors shown correspond to terminal blocks on driver.
L3D (Ecosystem®)
L3D (3-wire)
Wiring Diagram for 3-Wire Control
To 3-wire Dimming Control
Gray (-)
24V DC (+)
96W Non-Dim
0.88”
(22mm)
Neutral (White)
Ground (Green)
Load per driver
Osram
Switched Hot (Black)
Switched Hot (Black)
Dimmed Hot (Orange)
Maximum wiring distance*
Wiring Diagram for EcoSystem® Digital Control
+V
Hi-lume®
A-Series
LED light
engine
-V
Ground
Note: Colors shown correspond to terminal blocks on driver.
To Line
Voltage
Input
1.99”
(51mm)
4.6”
(117mm)
To EcoSystem®
Digital Link
Purple (+)
Wiring diagrams
VOLTAGE
120-277 V AC
50/60Hz
2.0”
4.42”
(36mm)
1.68"
(43mm)
Black (L)
1.0”
(25mm)
8.94"
(227mm)
9.48"
(241mm)
White (N)
0.64”
(16mm)
To Forward Phase Control
Case dimensions
Case 2 Hi-Lume, case K (enclosure supplied)
Case 1 (no enclosure)
+V
Neutral (White)
Ground (Green)
E1 (Purple)
E2 (Purple)
Hi-lume®
A-Series
LED light
engine
-V
Ground
Note: Colors shown correspond to terminal blocks on driver.
Lutron
Wire gauge
≤48W
≤72W
≤96W
#18AWG
37’
25’
18’
≤40W
15’
#16AWG
59’
39’
29’
25’
#14AWG
95’
63’
47’
40’
#12AWG
151’
101’
75’
60’
#10AWG
241’
160’
120’
—
Voltage drop guide for 24VDC. Actual Voltage drop
to be calculated by installer
*
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement