Using a Cisco Unified IP Phone with Cisco Vision Dynamic Signage Director Quick Start TV Control WELCOME CONTROLLING TVS In your luxury suite, the Cisco Unified IP Phone can be used to control the TVs and to place calls. It has a touch screen, softkeys (which vary depending on the phone model, screen contents, and your site’s implementation), a navigation pad, and a phone keypad. To control the TVs, touch TV/Volume. NOTE: The Back softkey will take you back to the previous operational screen. To scroll through multiple listing pages, use the Page Up or Down arrows. As an alternative, you can touch Guide to view the channel guide on the associated TV, or touch Keypad and enter a desired channel number. SELECTING A DISPLAY The TVs are typically identified by location. Touch the label of the TV you want to control or touch All. ADJUSTING THE VOLUME To adjust the volume, touch the following buttons: Use the touch screen to select the TVs or select a service. TIP: Press the Services button if services are not displayed. Use the softkeys to: Navigate. Mute or unmute all TVs with single touch. Turn on and off all TVs with single touch. The navigation pad is not used with TV control services in Dynamic Signage Director. Use the keypad to dial a phone number or enter a channel number. Use the line buttons to select a phone line (if multiple), speed dial, or go to a defined URL. SELECTING A CHANNEL Touch desired channel, or touch the Page Up or Page Down arrows to see additional channels. To increase the volume on the selected TV(s). To decrease the volume on the selected TV(s). To toggle between mute and unmute on the selected TV(s). Using a Cisco Unified IP Phone with Cisco Vision Dynamic Signage Director Quick Start TV Control USING ADVANCED FUNCTIONS Closed Captioning To access advanced functions such as controls for external inputs and closed captioning, touch Advanced. Many of the available channels may provide closed captions that can be displayed on the TV. To turn closed captioning on (or off), touch cc. If the suite is equipped with multiple phone lines and you wish to place a call on a line other than the primary line, simply touch the line button associated with the desired line and dial the number using the keypad. USING SOFTKEYS The softkeys on the phone are located at the bottom of the touch screen and provide access to functions, which vary depending on the phone model and screen currently being displayed. TV Inputs If the TV has been configured to allow external input devices, such as a DVD player or personal computer, the TV inputs list will display a listing of available sources. Touch the desired input. Softkey Function Advanced Access the advanced features (external input, closed captioning) for the selected TV. Back Go back to the previous operational screen. Guide Display the channel guide on the designated TV. To place a phone call, simply pick up the handset and dial the desired number. Home or Close Return to the home screen (Display Control). Alternatively, you can: Keypad Select a channel by entering a number using the keypad. Mute or UnMute Mute or unmute the volume on all TVs. Tv On or Tv Off Turn power on or off for all TVs. More (9971 only) Displays additional softkeys. NOTE: Depending on your configuration, there might be multiple Closed Captioning options. PLACING A PHONE CALL Touch the Phone symbol on the touch screen and dial the number on the displayed touch panel. Touch the desired speed dial (availability may vary). Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices. © 2017 Cisco Systems, Inc. All rights reserved.