Zanussi | EVOLUTION EVO700 | User's Manual | Zanussi EVOLUTION EVO700 User's Manual

EVOlution
comes from tradition
2 lines,
5 new functions,
100s of combinations
5 new functions
Evolution:
Grill HP
, Highly productive and energy saving, thanks to the large cooking
surface with easily removable grates, the ‘’energy control’’ for a precise
regulation of the power level and the piezo ignition.
Convection
Oven , Grill HP
Flexible
andproductive
powerful. and
Cooking
times
are reduced
upthe
to 50%,
Highly
energy
saving,
thanks to
large compared to a
traditional static oven and can work with 2 trays simultaneously.
cooking surface with easily removable grates, the ‘’energy
Pastacooker
, regulation of the power level and the piezo
control’’ for a precise
Versatile
and
high
performing,
thanks to the ‘’energy control’’ for gas models,
ignition.
the infrared heating system for the electric models and the ‘’energy saving
device’’for the refilling of the well with hot water.
Braising
pan
Braising
Pan
Multipurpose
and and
easyeasy
to use.
WetWet
or or
drydry
cooking
ofoflarge
Multipurpose
to use.
cooking
largequantities
quantitiesthanks
to the
Duomat
cooking
surface,
guaranteeing
uniform
cooking
thanks to the Duomat cooking surface, guaranteeing uniform temperature,
the new
gastemperature,
or electric the
heating
system
and the
thermostatically
controlled
cooking
new gas
or electric
heating
system and the
temperature ranging from 120°C to 300°C.
thermostatically controlled temperature ranging from 120°C to 300°C.
Induction HP
Fast and efficient. The ideal solution for express service with low energy
consumption
thanks to
the pan detection device, the energy regulator and the glass
Induction
HP
ceramic
surface
which
only
heatssolution
up uponfor
direct
contact.
Fast and efficient. The ideal
express
service with low energy
Evolution
consumption thanks to the pan detection device, the energy regulator and
the glass ceramic surface which only heats up upon direct contact.
Sturdiness and reliability
� pressed tops
Sturdiness
� one piece
structure
and reliability:
� internal frames to reinforce feet
�
Pressed tops
�
One piece structure
�
Internal frames to reinforce feet
Environment
Energy savings
Zanussi Professional cares about nature and kitchen working
environment.
� all Evo900
Evo700 equipment is 98% recyclable
� all packaging is 100% recyclable
� wide range of products, gas grill HP, gas pasta cooker,
electric induction top offer energy savings, low emissions
and lower consumptions
� the exclusive “flower flame” system allows the flame to be
precisely adjusted to fit pans of any diameters, thus avoiding
dispersion into work area and providing high efficiency
5 new functions
Convection Oven
Pastacooker
Flexible and powerful. Cooking times are reduced up to
Versatile and high performing, thanks to the ‘’energy control’’ for
50%, compared to a traditional static oven and can work
gas models, the infrared heating system for the electric models
with 2 trays simultaneously.
and the ‘’energy saving device’’ for the refilling of the well with
hot water
Service
Use Zanussi Professional products and you can count on a qualified
Service network wherever you are!
�
A
fast technical assistance with a prompt and efficient service
worldwide
�
Skilled
and qualified partners engaged in installation, spare parts
delivery and maintenance
�1,139
authorized service centers
�More
than 5,000 expert technicians
�
10-year
availability of spare parts from the end of production
�44,000
available spare parts on stock
�24/48
hours spare parts delivery worldwide
As Zanussi Professional Customer’s you can rely on a worldwide
skilled Service Engineers network.
, Gas Burners
Electric Hot Plates
Induction Tops
2 , 4 or 6 round plates
4 square plates
2 or 4 zones
2 frontal zones
top models
top models,
400, 800 mm widths
top models,
400, 800 mm widths
on gas static oven
on electric static oven
wok top
400 mm width
2, 4, 6, or burners
5,5 kW burners
on electric static oven
400, 800, 1200 mm widths
6
Infrared Tops
2 or 4 zones
top models,
400, 800 mm widths
on electric static oven
modular
cooking line
Gas Solid Tops
top model,
800 mm width
on gas static oven
solid top with 2 or 4
burners, 800, 1200 mm
widths
Fry Tops
gas or electric heating
mild steel surface
(smooth, ribbed, mixed)
hard-chromed surface
(smooth or mixed)
sloped or horizontal surface
Grills
top models,
400, 800 mm widths
free standing models,
400, 800 mm
Fryers
gas or electric heating
free standing, top
400, 800 mm widths
chip scuttle
15 lt electric
programmable
automatic fryer
top models,
400, 800 mm widths
7
Pasta
Cookers
24,5 lt, gas/electric,
1 or 2 wells,
400, 800 mm widths
Boiling
Pans
round well 60 lt,
800 mm width
Braising
Pans
Multifunctional
Cookers
60 lt, 800 mm width
22 lt, 800 mm width
gas or electric heating
11 lt, 400 mm width
mild steel or stainless steel
cooking surface
gas or electric heating
gas or electric heating
24,5 lt, electric
automatic programmable
direct or indirect heating
manual or automatic water
refill of the double jacket
8
modular
cooking line
Bain-maries
electric heating
top models,
400, 800 mm widths
Worktops
top models,
200, 400, 800 mm widths
with drawer
400, 800 mm widths
Refrigerated
Bases
refrigerated base,
2 drawers or 2 doors,
1200 mm width
Neutral
Units
open bases,
200, 400, 800, 1200 mm
widths
refrigerated base,
3 drawers or 3 doors,
1600 mm width
freezer base,
2 drawers,
1200 mm width
9
Gas Burners
Maximum level power, sturdiness, efficiency and
hygiene are the features that distinguish the Gas Burners
in the Zanussi Professional Evo700.
�
1-piece
side and rear panel for durability and maximum
stability
�
1-piece
pressed work top in stainless steel (1,5 mm)
with smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
Right-angled,
laser cut side edges for flush fitting
of units
�
Cast
iron pan supports
�
Exclusive
“flower flame” burners with flame failure
device and protected pilot light guarantee flexibility
as well as high efficiency
�
Flexible
burners for all your needs, thanks to its unique
shape which expands both horizontally and vertically for
perfect cooking with pots and pans of any shape or size
�
The
flame adapts to the diameter of the pan bottom
providing maximum coverage and reaching the cooking
temperature much faster thus reducing heat dispersion
Gas Static Oven
�
Maximum
level performance with a power of 6 kW and
an operating temperature from 120°C to 280°C
and easy cleaning guaranteed by the cooking
chamber entirely in stainless steel
�
Sturdiness
�
Insulation
guaranteed by the 40 mm thick door
�
Supplied
with stainless steel wire runners fixed to hold
GN 2/1 pans
�
Oven
knobs are positioned on the upper control panel for
improved ergonomics
10
�
Piezo
ignition for easy operation
�
Oven
chamber with 3 levels to accomodate GN 2/1 trays
Electric Hot Plates
The Evo700 Electric Hot Plates are supplied with round
or square cast iron hotplates. Sturdy and safe, they are
distinguished by their pressed stainless steel worktop,
1,5 mm thick, and by their airtight connection to the
structure, which allows maximum ease in cleaning.
�
1-piece
side and rear panel for durability and maximum
stability
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
Right-angled,
laser cut side edges for flush fitting of units
�
Cast
iron hot plates with safety thermostat, hermetically
sealed to work top
�
Individually
controlled hot round or square plates,
(2,6 kW each), with step regulation
Electric Static
Oven
�
Recessed,
double-skinned, insulated door with pressed
internal panel for air-tight closure and better hygiene
�
Oven
cavity in stainless steel with ribbed base plate
�
Oven
chamber with 3 levels to accomodate GN 2/1 trays
�
Top
and bottom heating elements can work together or
autonomously
�
Adjustable
thermostat from 110°C to 285°C
Stainless steel oven
Smooth pressed top
11
12
Induction Tops
The induction cooking system applied to the 6 mm thick
ceramic glass hotplates, allows rapid and completely safe
cooking without any heat dispersion. Thanks to the power
adjustor the chef has strict control over boiling. It is ideal
for the preparation of delicate dishes such as custards and
it is also perfect for pan operations.
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Right-angled,
laser cut side edges for flush fitting of units
�
High
impact, heavy duty, 6 mm thick Ceran® glass
cooking surface with exclusive design
�
Independently
controlled induction zones:
diam. 230 mm - 3,5 kW and 5 kW ( HP version)
panel with 9 power levels and indicator light for
zone operation
energy efficiency%
�
Control
Evo700 Induction Wok Top
- High impact, heavy duty,
6 mm thick Ceran® glass Wok bowl 5 kW HP - Single induction zone with overheating safety device
- Control panel with 9 power levels and indicator light for zone
operation
90%
60%
Gas
boling top
70%
Electric
boling top*
Induction
cooking
Energy efficiency, actually transferred to the
food compared to the amount produced by the
cooking appliances
Evo700 “Spicy” Frontal Induction Top
- 2 independently controlled induction zones, 5 kW HP
(230 mm diam.) each with overheating safety device
- 6 x GN 1/9 condiment containers with lids
*Electric boiling top: measured after pre-heating
13
Infrared Tops
T
he Infrared Tops, consisting of radiant elements with
2 concentric circle zones with a maximum diameter of
230 mm, are controlled by an energy regulator and allow
quick cooking of all foods, especially if they are initially
cold. The 6 mm ceramic glass top maximises easy
cleaning and pan movements. A light indicates the
presence of any afterheat for increased operator safety.
�
1-piece
pressed work top in stainless steel (1,5 mm)
with smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
side and rear panels for durability and
maximum stability
�
1-piece
�
Right-angled,
laser cut side edges for flush fitting of
units
�
High
impact, heavy duty, 6 mm thick Ceran® glass
cooking surface with exclusive design
�
Independently
controlled concentric infrared zones
(diam. 230 mm - 2,2 kW max power)
�
Concentric
radiant elements to allow the selection of
the heating area according to the pan size
�
Warning
light to indicate residual heat on the surface
for operator safety
Two concentric cooking zones
14
Gas Solid Tops
The Solid Top is provided with an extensive cast iron
hotplate with a large surface (800x700 mm), useful for
placing a lot of pans.
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Right-angled,
�
Durable
laser cut side edges for flush fitting of units
cast iron cooking surface 30 mm thick
�
Cooking
surface with differentiated temperature zones,
maximum temperature of 500°C in center gradually
decreasing to 200°C at the perimeter
�
Single
central burner with optimized combustion
and flame failure device
�
Piezo
ignition
�
Protected
pilot light
15
16
Fry Tops
The Evo700 Fry Tops have been designed to guarantee
that the required temperature is reached in a short time
and to ensure even heat distribution and very low heat
dispersion. The one-piece pressed cooking top with
rounded corners allows for better hygiene and is available
with a smooth, ribbed or mixed surface, in either mild
steel or chrome-plated steel.
�
1-piece
pressed work top in stainless steel (1,5 mm)
with smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
side and rear panels for durability and
maximum stability
�
1-piece
�
Right-angled,
laser cut side edges for flush fitting of
units
�
Cooking
plate (12 mm thick) for even temperature
distribution
�
Mild
steel or hard-chromed cooking surface
�
Large
drain hole with grease collection drawer
�
Large
5 litres grease collection drawer (optional) for
installation on open base
Gas heating
�
Mild
steel surface: temperature range from 200°C to
400°C
�
Hard-chromed
surface with thermostatic control and
safety thermostat: temperature range from 130°C to
300°C
�
Piezo
ignition
Electric heating
�
Incoloy
armoured heating elements beneath the
cooking plate
�
Thermostatic
control; safety thermostat, temperature
range from 120°C to 280°C
17
Grills
The Evo700 Grills are ideal for cooking meat, fish and
vegetables.
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners and pressed hygienic grease
collector areas
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Right-angled,
laser cut side edges for flush fitting of units
collector drawer can be filled with water to
ease cleaning and to add moisture to the food
�
Grease
�
Removable
splash-guard in stainless steel
�
Free
standing models – double-sided cast iron grids ribbed for meats and smooth for fish and vegetables
�Grid
scraper included as standard
Gas Grills
�
Stainless
steel burners with flame failure device and
deflection trays to prevent blockage
Electric Grills
�
Incoloy
armoured heating elements beneath the cooking
plate
�
Power
ON indicator light
Pressed grease collection drain
Incoloy heating elements
18
Radiant tiles
Stainless steel burners
Grill HP
PATENT
PENDING
This is a highly productive and energy saving grill thanks to
the new radiant heating system, the large cooking surface
with easily removable grates, the “energy control” for a
precise regulation of the power level and the piezo ignition.
�
Highly
efficient radiant heating system (patent pending)
�
Stainless
steel burners with optimized combustion, flame
failure device and protected pilot light and piezo ignition
�
Max.
temperature on cooking surface 350°C
�
Heavy
duty, removable cast iron grids
�
Full
depth grease collection drawers, 1 per burner,
can be filled with water to ease cleaning and to add
moisture to the food
�
New
exclusive low-porosity surface treatment
�
Dismountable
construction of the cooking top for easy
cleaning, washable in dishwasher
�
Removable
3-sided splash guard in stainless steel
The new radiant heating system
�
An
efficient combustion of the burner flame guaranteed by
the incoming air
Removable 2 lt grease collection drawer, full depth of grill (one
per burner); can be filled with water to facilitate cleaning and to
add moisture to the food
�
The
burner flame heats the AISI 441 radiant shield, bringing
the temperature above 700°C
�
The
heat is radiated towards the heat deflectors and onto
the cooking grate
�
The
cooking grate reaches an even temperature
throughout, providing perfect grilling results on the entire
cooking surface
19
Fryers
The Fryers in the Evo700 line are distinguished by their
excellent performance and remarkable efficiency
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Right-angled,
�
Oil
laser cut side edges for flush fitting of units
drainage tap
�
Thermostatic
temperature control with safety thermostat
to protect against overheating
V-shaped Gas Fryers
�
V-shaped
well with external high efficiency stainless steel
burners with optimized combustion, flame failure device,
protected pilot light and piezo ignition
�
From
105°C to 185°C
Gas Tube Fryer (34 lt)
�
34
lt ideal for floured foods
�
Gas
tube inside the well create a “cold zone” to capture
food particles
�
Stainless
steel burners with optimized combustion, flame
failure device and protected pilot light
�
Thermostatic
�
Safety
�
Piezo
temperature control from 110°C to 190°C
thermostat to protect against overheating
ignition
V-shape well with external
heating elements/burners
Electric Fryers
�
7,
15 lt V-shaped well with external high efficiency
infrared heating elements: from 105°C to 185°C
�
2x5,
12, 14 lt well with tilting incoloy heating elements:
from 105°C to 185°C
Internal tilting heating elements
20
Automatic Fryer
V-shaped 15 lt well with external electric heating
elements offers power, efficiency and has the ability to
bring the oil to frying temperature rapidly
control to set cooking temperature, set
cooking time, main switch, set actual temperature,
store cooking program
�
Electronic
�
Automatic
basket lifting system, programmable with 5
different programs (5 temperatures and 2 lifting times per
program)
life of the oil (approx. 30%) thanks to the
uniform distribution of the heat inside the well
�
Longer
�
Melting
functions to safely heat up solid shortening to fry
products
Electric Chip
Scuttle
T
he Chip Scuttle, which is indispensable for salting and
keeping all fried foods at a constant temperature after
cooking, has a 316 AISI stainless steel well.
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Right-angled,
�
Perforated
laser cut side edges for flush fitting of units
false bottom to drain excess oil into the well
basin
�
Infrared
�
On/off
heating lamp positioned on the back of the unit
switch
Infrared heating light
21
Pasta Cookers
The Pasta Cookers in the Evo700 line guarantee high
productivity and remarkable thermal performance.
Versatile and high performing thanks to the “energy
control” for the gas models, the infrared heating system
for the electric models and the optional “energy saving
device” for the refilling of the well with hot water.
The “energy saving device”, optional for all models,
allows the refilling of the well, done with hot water so
boiling is constant, providing the best cooking results,
increasing productivity and saving energy. No further
energy supplied is needed.
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Right-angled,
laser cut side edges for flush fitting
�
Boiling
wells in 316L AISI stainless steel with seamless
welding
�
Electromechanical
sensor prevents operation without
water
�
Self-skimming
system with continuous water filling
regulated through manual water tap
�
Large
drain with manual ball-valve for fast emptying of
the well
�
Automatic
22
basket lifting system (optional)
Well with rounded
corners
Overflow zone
with drain hole
Gas models
�
“Energy
control” for precise power regulation, allows
adapting consumptions to real needs
�
Individually
controlled high efficiency burners (one for
each well), with flame failure device
�
Pilot
�
No
light and piezo ignition
electrical connection required
Electric models
heating system positioned below the base
of the well
�
Infrared
�
4
boiling levels to ease the use and optimise
consumption
Automatic Basket
Lifting System
P
rogrammable and automatic lifting system guarantees
the repeatability of the cooking cycle, ensuring the
same high quality of the food time after time due to the
automation of the entire cooking process.
�
Possibility
to memorize 9 cooking times via digital
control. Each lifter can work indepentently from the
others
�
Easy
operation, basket lifting is activated through a
simple push button function
�
Can
be activated manually if necessary
�
200
mm wide, with 2 stainless steel basket supports,
each able to hold 1/2 size baskets
�
Place
on either side of the pasta cooker for maximum
flexibility or on both sides to provide lifting for up to 4
single portion square baskets
23
Boiling Pans
The Boiling Pans in the Evo700 line, thanks to the energy
regulator, guarantee uniform cooking and precise control
of boiling while the stainless steel gas burners, controlled
by a pilot flame with electronic ignition ensure optimized
combustion and high efficiency.
�
Well
and double skinned lid in stainless steel
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
Pressed
well in stainless steel
�
Deep
drawn well with rounded corners and seamless
welding
�
Safety
valve to guarantee working pressure on models
with indirect heating
�
Solenoid
valve for refilling with hot or cold water
�
External
valve for manual evacuation of excess air
accumulated in the jacket during heating phase on
models with indirect heating
�
Large
capacity drain tap to discharge food
Gas models
�
Stainless
steel burners with optimized combustion, flame
failure device, temperature limiter and protected pilot light
Electric models
�
Heating
elements with energy control, temperature
limiter and pressure switch
Direct heating (gas models)
�
Burners
heat the well directly
�
Food
can reach a higher temperature than with indirect
heating
Indirect heating (gas or electric model)
�
Uses
integrally generated saturated steam at 110°C in
double jacket
�
Pressure
�
Models
switch control
also available with automatic refilling of the water
in the double jacket
24
Top with safety valve and ergonomic handle
Braising Pans
All Evo700 Braising Pan models have stainless steel
wells that are shaped with rounded corners and with a
pressed drainage pouring lip to make both food drainage
and cleaning operations easier.
�
Well
with rounded corners and seamless welding
�
Double
skinned lid in stainless steel
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Cooking
surface in mild steel especially indicated for
“dry cooking” or “shallow frying”
�
Cooking
surface in stainless steel especially indicated for
“wet cooking”
�
High
precision manual tilting system
Gas models
�
Burners
with optimized combustion, flame failure device
and piezo ignition with electronic flame control
�
Thermostatic
temperature control from 90°C to 290°C
Electric models
�
Electric
heating elements positioned beneath the cooking
surface
�
Thermostatic
temperature control from 120°C to 280°C
EVO700 braising pans available with mild steel bottom plate for
dry cooking and with stainless steel plate for wet cooking
25
Multifunctional
Cookers
4 appliances in one! Can be used as a fry top, braising
pan, boiling pan or bain-marie, a must for a kitchen needing
maximum flexibility.
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
side and rear panels for durability and maximum
�
1-piece
stability
�
Right-angled,
laser cut side edges for flush fitting of units
�
Stainless
steel well with rounded corners, seamlessly
welded to the work top
�
Cooking
surface in compound steel (3 mm layer of 316
AISI stainless steel bonded to a 12 mm layer of mild
steel), optimal for multifunctional use
contains guides which can host GN containers to
collect the food drained through the large drain hole
�
Base
Gas models
�
Burners
equipped with a double flame line for uniform
heat distribution
�
Thermostatic
gas valve. Piezo ignition
�
Temperature
range from 100°C to 250°C
Electric models
�
Incoloy
armoured heating elements beneath the cooking
surface
�
Thermostatic
control and energy regulator for precise
cooking control and a reduction in the fluctuation of
energy around the set temperature
�
Temperature
26
range from 100°C to 250°C
22 lt 304 AISI stainless steel well with a 15 mm compound
bottom (12 mm bottom layer of mild steel bonded to a 3 mm
upper layer of corrosion resistant 316 AISI stainless steel)
ensures uniform cooking throughout
Bain-maries and
Work tops
Bain-marie
�
1-piece
pressed work top in stainless steel (1,5 mm) with
smooth rounded corners
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
Right-angled,
�
Stainless
laser cut side edges for flush fitting of units
steel well with rounded corners and seamless
welding
�
Suitable
for GN 1/1 containers, max. height 150 mm
�
Operating
temperature from 30°C to 90°C
�
Maximum
water filling level marked on side of well
�
Manual
water filling (water filling tap can be ordered as
an option)
Well with perforated false bottom and overflow pipe
Work Tops
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
�
1-piece
side and rear panels for durability and maximum
stability
�
With
closed front or with drawer
27
Complementary
units
Open bases
�
Exterior
panels in stainless steel with Scotch-Brite
finishing
„„
Service
ducts
�
Optional
accessories:
- doors with handles
- drawers
- runners for GN containers
Refrigerated and freezer bases
�
Temperature
range from -2°C to +10°C for refrigerated
base, from -15°C to -20°C for freezer base
�
Built-in
compressor unit
�
Thermostat,
defrost indicator light and ON/OFF switch
�
Large
stainless steel drawers on telescopic anti-tilt
runners able to accept GN 1/1 containers
�
For
ambient temperatures up to 43°C
High Performances
in Limited Spaces
T
he new Zanussi Professional Evo700 dimensions
have been conceived to facilitate the chef’s daily work in
the kitchen.
�
Great
flexibility and modularity for a tailored kitchen.
The working space will be customized according to the
chef’s needs.
�
700
mm deep with a modularity of 400, 800 and 1200
mm wide perfectly compatible with the Evo900 (900 mm
deep) in a back to back installation.
28
700 mm
900 mm
Installations
Evo700 safely and easily solves problems of hygiene,
installation on feet
cleaning and functionality related to the kitchen
environment, also thanks to the Cantilever Systems
�
Installation
is very simple, and is by means of a rear hook
in the flue area
�
Connections
to the water, electric and gas systems have
been provided inside the appropriate units, which are
easy to reach and, therefore, also easy for maintenance
�
Standard
solution, ideal when needing a fixed installation
of appliances that can be adjusted in height
�
Provided
as standard on all free standing appliances and
bases
installation on cement plinth
�
Provides
a closed solution to be mounted on cement
plinth - various solutions available*
�
Suitable
30
for all free standing units*
cantilever installation
�
Provides
an aesthetic and hygienic solution by use of a
supporting frame. Can be used for one side and back-toback installations
�
Suitable
for most units* of Evo700 and Evo900
bridge installation
�
Provides
a hygienic solution by allowing to suspend a
number of top appliances between two free standing
units
�
Must
be installed between two free standing units up to
1600 mm in length*
installation with kicking strip
�
Covers
the feet to close the area between the appliances
and the floor
�
Can
be applied to free standing appliances and bases
installed on feet
installation on wheels
�
Replace
feet, provides a flexible solution that allows for
the easy movement of the appliances
�
Can
be installed on all free standing appliances and
bases*
* For more detailed information, please contact your local Zanussi Professional representative
31
Preparation
Dishwashing
Static
Static
Dishwashers
Dishwashers
Static
Static HD
HD
Washing
Washing system
system
Laundry equipment
Cooking
Evo900
- Evo700
N900
- N700
Snack
Snack 600
600
The Company reserves the right to change specifications without notice. Photos are not contractual.
The Range
Industrial
Industrial machines
machines
Ovens
Distribution
EasyLine
easyLine
Self-Service
Self-Service ActiveSelf
ActiveSelf
FCF
FCF
Fit-System
Fit-System
Refrigeration
... and much more
9JZDKU
Refrigerated appliances
9JZBFU
www.zanussiprofessional.com
Download PDF

advertising