C-more 6-inch Micro Quick Start Guide

C-more 6-inch Micro Quick Start Guide
Safety Information
®
WARNING: To minimize the risk of potential safety problems, you should follow all applicable
local and national codes that regulate the installation and operation of your equipment. These
codes vary from area to area and it is your responsibility to determine which codes should be
followed, and to verify that the equipment, installation, and operation are in compliance with the
latest revision of these codes.
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860
Quick Start Guide
C-more 6” Micro-Graphic Panels, Accessories & Replacement Parts
Equipment damage or serious injury to personnel can result from the failure to follow all applicable
codes and standards. We do not guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for your product design, installation, or
operation.
If you have any questions concerning the installation or operation of this equipment, or if you
need additional information, please call us at 1-800-633-0405 or 770-844-4200.
4
The C-more 6” Micro-Graphic panel can be
mounted through a cutout in an enclosure by using
the template provided with the panel, or using the
dimensions shown. The optional keypad bezels also
include templates. The enclosure mounting thickness range for the panels and the keypad bezels is
0.04”–0.2” [1–5 mm]. Mounting screw torque is
21-28 oz-in [0.15-0.2 Nm].
This publication is based on information available at the time it was printed. At Automationdirect.
com® we constantly strive to improve our products and services, so we reserve the right to make
changes to the products and/or publications at any time without notice and without obligation.
This publication may also discuss features that may not be available in certain revisions of the
product.
8
Install C-more 6” Micro-Graphic Panel
To access the Setup Menu of the panel’s setup
screens, press the the BAK [F1] and ENT [F5]
function keys simultaneously for three (3) seconds.
Panel Cutout (all models)
Landscape cutout shown
+0.04
6.339 –0.00
+1
161.0 –0
0.256
[6.5]
0.260
[6.6]
EA1-T6CL
shown in Portrait (Vertical) mode
NOTE: Software and Firmware Version 2.5 or later is required with model EA1-T6CL.
Available for free download at www.automationdirect.com.
General Description
The C-more 6” Color Micro-Graphic panel has a 5.7-inch TFT LCD color 320 x 240 dot display with an
LED backlight. It features five user-defined function keys, each key with a user-defined red LED indicator.
The panel displays up to 40 lines by 80 characters of static text and up to 40 lines by 40 characters of
dynamic text with embedded variables and phrases mixed with graphics at landscape orientation. Portrait
orientation can display 60 characters and 53 lines of static text and 40 lines by 40 characters of dynamic
text. EA1-T6CL is rated UL for use on a flat surface of Type 1, 4X enclosure (for indoor use only). The
C-more 6” Micro-Graphic panels are powered from a 12-24 VDC power supply during operation, or can be
powered in low power mode thru the USB port from a PC during programming.
Other features include:
3. Extensions
CUTOUT
OUTLINE
+0.04
4.811 –0.00
+1
122.2 –0
4. Versions
BEZEL
OUTLINE
2. Setting
0.260
[6.6]
5. Reset to Factory Default
Examples
5
1
Unpack and Inspect
• Built in Alarm Control setup that activates beep, backlight flash, customized alarm banner, and red LED blinking
• Up to 999 screens, limited only by memory usage
• 0 to 50 °C (32 to 122 °F) operating temperature range
• C-more 6” Micro-Graphic panel
• cutout template
• mounting clips
• gasket
• function key label inserts
• Quick Start Guide
• DC Power Connector
Function Key
Label Inserts
• 2-year warranty from date of purchase
DC Power
Connector
2
20-Button Keypad Bezel
Install the Software and Develop a Project
• Operating System - Windows® XP Home / Professional Edition Service Pack 2, Windows® 2000 with Service Pack 4,
Windows® Vista (32 and 64 bit), Windows® 7 (32 and 64 bit), Windows 8 (32 and 64 bit)
• Keyboard and Mouse or compatible pointing device
• Super VGA color video adapter and monitor with at least 800 x 600 pixels resolution
(1024 x 768 pixels recommended) 64K color minimum
• 150 MB free hard-disk space
• CD-ROM or DVD drive for installing software from the CD, or internet access to download free programming
software
• USB port for project transfer from software to touch panel
9
6
C-more 6 Inch
Color Micro-Graphic
Panel
AutomationDirect Productivity Series
AutomationDirect Do-more
AutomationDirect CLICK
AutomationDirect GS Drives
AutomationDirect Modbus
Connect C-more Color Micro-Graphic Panel to Computer
Modicon Modbus RTU
Entivity Modbus RTU
Allen-Bradley DF1 Full Duplex
Allen-Bradley DF1 Half Duplex
Allen-Bradley PLC5 DF1
Allen-Bradley DH485
GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
NOTE: Install C-more Micro-Graphic
Programming software before connecting
the panel to the PC to ensure the panel
drivers install correctly.
Mitsubishi FX
Mitsubishi Q and QnA
Omron Host Link (C200 Adapter, C500)
Omron FINS Serial (CJ1, CS1)
C-more 6-inch Color
Micro Graphic Panel
Function
Key Label
Insert
Siemens PPI (S7-200 CPU)
NOTE: For the latest list of available
PLC drivers and PLC cables go to
www.automationdirect.com.
1. Remove
Expansion
Connector
Protective
Cover from
rear of
panel.
10
USB-CBL-AB6
CLICK PLC
Provide Power to the C-more 6” Color Micro-Graphic Panel
Become Familiar with Available Communication Ports
The C-more 6” Color Micro-Graphic panels include a built-in USB Type B port used to communicate with
a PC during project development. There is a 15-pin RS-232/RS-422/RS-485 port for communications to
a PLC.
2). The C-more 6” Micro-Graphic panel can be powered
during programming from the PC through a USB
Programming Cable such as USB-CBL-AB6. When powered
from the PC, the panel will operate in Low-Power mode and
the screen brightness is diminished.
PLC 15-pin serial
communications Port2
Agency Approvals
Supported temperature
Wire Material
C-more Micro-Graphic Panels
& Accessories
C
E157382
Per file #
E157382
UL
R
CSA
234884
MODEL:EA1-T6CL
CE
EN61131-2
ISO-9000
INPUT:12-24V 6.5W Class2
Date code:****
MADE IN CHINA
EA1-T6CL + serial number
4
EA-2CBL
serial cable
R01. 1 2 3 4 5
MODEL:EA1-T6CL
R
LISTED
7M17
IND.CONT.EQ.
8
1
15
9
Tightening Torque
Power supply wire connection
1.7 lb-in (0.2 Nm)
Required Wire Specification
UL508
Supply to Panel:
1 A @ 12 - 24 VDC
(10.8 - 26.4 VDC)
EA1-T6CL + serial number
Expansion
Connector
UL/CUL
Port 2
1). The panel is powered by a 1 Amp @ 12-24 VDC class 2
power source in normal operation.
INPUT:12-24V 6.5W Class2
Date code:****
MADE IN CHINA
USB-CBL-AB6
Name
R01. 1 2 3 4 5
R
LISTED
7M17
IND.CONT.EQ.
8
1
15
9
Pin
Signal
Pin
Signal
Pin
Signal
1
Frame GND
6
LE
11 TXD+ (422/485)
2
TXD (232C)
7
CTS (232C)
12 TXD– (422/485)
3
RXD (232C)
8
RTS (232C)
13 Term. Resistor
4
Supplies +5VDC
9
RXD+ (422/485)
14 do not use
5
Logic GND
10 RXD– (422/485)
15 do not use
Wire Size
Over 60 °C
Equipment
Ground
GND
–
+
Recommended
DC Supply Fuse
750 mA fast acting,
ADC p/n AGC-75
Copper
16 - 22 AWG
Copyright 2017, Automationdirect.com Incorporated/All Rights Reserved Worldwide
Additional Help and Support
• For product support, specifications, and installation troubleshooting, a Hardware
User Manual can be downloaded from the On-line Documentation area of the
AutomationDirect web site or purchased through the AutomationDirect Sales team @
1-800-633-0405 as part number EA1-MG6CL-M.
• For software programming help, refer to the C-more Micro-Graphic Programming
Software on-line embedded help.
RS-232/422/485
US
Direct LOGIC (VGA Style) 15-pin port,
DL06, D2-250 (250-1), D2-260
(RS-232C).
Direct LOGIC PLC RJ-11 port, D3-340
(RS-232C).
Direct LOGIC DL405 PLC 15-pin D-sub
port, DL405 (RS-232C).
Direct LOGIC PLC 25-pin D-sub port,
DL405, D3-350, DL305 DCU and all DCM’s
(RS-232C).
Allen-Bradley MicroLogix 1000, 1100,
1200 & 1500 (RS-232C)
Allen-Bradley SLC 5-03/04/05,
ControlLogix, CompactLogix, FlexLogix
DF1 port (RS-232C)
Allen-Bradley PLC-5 DF1 port
(RS-232C)
Allen-Bradley MicroLogix, SLC 5-01/02/03,
DH485 port (RS-232C)
GE 90/30, 90/70, Micro 90, Versamax Micro (Port2)
15-pin D-sub port
(RS-422A)
MITSUBISHI FX Series 25-pin port
(RS-422A)
MITSUBISHI FX Series 8-pin mini-DIN
(RS-422A)
OMRON Host Link (C200 Adapter, C500)
(RS-232C)
C-more 6-inch Color
Micro-Graphic Panel
USB Type B
Programming Port1
UL/CUL/CSA/CE Certification Numbers
AutomationDirect Productivity Series, Do-more,
CLICK, Direct LOGIC PLC RJ-12 port, DL05,
DL06, DL105, DL205, D3-350, D4-450 &
H2-WinPLC (RS-232C)
EA-2CBL
EA-2CBL-1
EA-3CBL
EA-4CBL-1
EA-4CBL-2
EA-MLOGIX-CBL
EA-SLC-232-CBL
EA-PLC5-232-CBL
EA-DH485-CBL
EA-90-30-CBL
EA-MITSU-CBL
EA-MITSU-CBL-1
EA-OMRON-CBL
Connect C-more 6” Micro-Graphic Panel to PLC
C-more 6 Inch
Micro-Graphic Panel
7
Cable Part No.
Cables used with Serial Port2
Connect the serial communications cable between the C-more Micro-Graphic panel and the PLC. The
panel can be connected to the PLC via the panel’s built-in 15-pin serial communications port with either
RS-232, RS-422 or RS-485 communications.
20 Button
Keypad Bezel
EA-MG6-BZ2
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
NOTE: Free download of the
C-more Micro-Graphic
programming software at the
AutomationDirect web site.
EA-MG-PGMSW
Cable Description
PLC Drivers
Serial - Port2 only
Use a Programming Cable such as USB-CBL-AB6, from a USB port type A on the project development PC
to the USB port on the C-more 6” Micro-Graphic panel as shown below.
4. Peel Protective Film
from front of panel.
Programming Software
Do you want to exit from System Screen?
No[F1] / Yes[F5]
4. Exit
Choose C-more 6” Color Micro-Graphic Panel to PLC
Protocols & Cables
AutomationDirect SOLO
EA-MG6-BZ2P
3
4. Touch Panel Test
ENT
User PC
Shown is an example of a
C-more 6” Micro-Graphic
panel being assembled with
an optional 20-button
Keypad Bezel.
UP
AutomationDirect DirectNET
3. Use (8) Bezel Mounting Clips to
secure keypad bezel through
enclosure cutout. Tighten screws
to a torque of 21-28 oz-in
[0.15-0.2 Nm].
2. Use the (4) Panel Mounting
Clips that are supplied with
the panel, to secure panel to
keypad bezel and compress
the gasket between the
panel and the keypad bezel.
Tighten screws to a torque
of 21-28 oz-in [0.15-0.2 Nm].
3. Buzzer Test
>
>
>
>
AutomationDirect K-sequence
Install Optional Hardware Accessories (sold separately)
21-Button Keypad Bezel
2. PLC Enquiry Test
BAK
Cutout
Template
• I nspect all equipment for completeness. If anything is missing
or damaged, immediately call the AutomationDirect returns
department @ 1-800-633-0405.
1. Serial Port – Loop Back Test
Following are the minimum system requirements for running C-more Micro-Graphic Programming
Software, EA-MG-PGMSW, on a PC:
Mounting
Clips
•U
npack any accessories that have been ordered, such as:
Keypad Bezel, DC Power Supply, programming cable,
communications cable, etc.
• UL, cUL & CE agency approvals (see below for details)
USB Programming
Cable
3. Test Menu
SETUP MENU
1. Information
2. Setting
3. Test Menu
4. Exit
NOTE: Software and Firmware Version 2.5 or later is required with model EA1-T6CL.
Available for free download at www.automationdirect.com.
•C
ommunications Cable (serial) – to connect the C-more Micro-Graphic panel to your controller.
• Optional replaceable clear screen overlay
Programming Software & Programming Cable (sold separately)
7. Rotation
26206 Bytes
3250594 Bytes
DWN
• P ersonal computer – to run the C-more Micro-Graphic programming software
• 2 optional keypad bezels, 20-button landscape and 21-button portrait mount
Accessory details shown on the reverse side.
3276800 Bytes
ENT
• P ower source – An external 12-24 VDC class 2 power source is required for normal High-Power operation.
Recommended power supplies are AutomationDirect part numbers PSC-24-015 or PSC-24-030.
• Built in 15-pin serial communications port (RS-232/422/485)
EA-6-COV2
6. Hourglass
MEMORY
Total:
Free:
•U
npack the C-more Micro-Graphic panel from its shipping
carton. Included in the carton are the following:
Clear Screen Overlay
4. Clear User Memory
•C
-more 6” Micro-Graphic panel
• USB Type B programming port
EA-MG6-BZ2
3. Calibration
BAK
Usage:
•C
-more Micro-Graphic USB Programming Cable such as USB-CBL-AB6, used to connect between a PC and the
Micro-Graphic panel’s built-in serial port. The panel will operate in Low-Power mode when powered by the
PC and the screen brightness is diminished.
1. Brightness
2. Touch / Key Beep
From the Setup Menu, information about the
panel can be obtained, settings can be adjusted, and
panel functions can be tested.
Minimum items required to create a working system:
•C
-more Micro-Graphic Programming Software EA-MG-PGMSW (Downloadable version available from the
AutomationDirect web site at no charge.)
1. Memory
2. Protocol
R .118 [R3]
Before you begin...
• 3276 KB memory
Accessories (sold separately)
Setup Menu
1. Information
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
EA1-T6CL
shown in Landscape (Horizontal) mode
Menu flow Chart
0.256
[6.5]
CUTOUT
Enclosure Thickness
Accessing the C-more Micro-Graphic Panel Setup Screens
NOTE: Recommended DC power supply to power the C-more Micro-Graphic Panel, AutomationDirect
Part No. PSC-24-015 or PSC-24-030.
• Refer to demos of the product at: www.CmoreMicro.com/software/software_demo.html
• For additional technical support and questions, call our Technical Support team @
1-800-633-0405 or 770-844-4200.
C-more 6” Color Micro-Graphic Panel Specifications
20 Button Landscape (Horizontal) Keypad Bezel
C-more 6” Color Micro-Graphic Panel Dimensions
Specifications
Description:
320 x 240 dots LCD display (Landscape Mode),
Five user defined keypad function buttons, and five user defined LED’s
Display:
• Type
5.7” TFT Color LCD, graphical characters
• Resolution
320 (W) x 240 (H) dots (Landscape Mode)
240 (W) x 320 (H) dots (Portrait Mode)
• Color
• Viewing Area Size
• Active Area Size
• Brightness
• Viewing Angle
USB Bus Power (Programming)
High Power Mode
45 nits (typ)
270 nits (typ)
• Keypad Function Buttons
• Functional Devices
4.770
[121.3]
Minimum of 1,000,000 cycles
Five user defined function key buttons with the ability to custom label with an overlay.
Minimum of 500,000 cycles
Each function key button includes a red LED that can be user programmed.
USB Type B
6
1
2
3
+/-
0
6.394
[162.4]
5.588
[141.9]
High Power Mode
5.0 VDC (4.75 – 5.25 VDC)
12/24 VDC (10.2 – 26.4 VDC)
Supplied from a PC USB.
Supplied from an external 12-24 VDC class 2
power source
6.5 W
Maximum 1 ms
0 to 50 °C (32 to 122 °F)
Maximum surrounding air temperature rating: 50 °C
–20 to +60 °C (–4 to +140 °F)
Part Number:
General:
• Micro-Graphic
Panels Supported
• Connection
• Power Consumption
• Keypad Button Life
Communication Port Adapters
D-SUB 15-pin 90-degree Communication Port Adapter (EA-ADPTR-4)
The EA-ADPTR-4 adapter plugs into the 15-pin serial port
on the rear of the 6” panel to allow a PLC
1.695
[43.1]
communication cable to be plugged in at a 90 degree angle
to reduce panel depth requirements. 15-pin
straight through pin-out. UL Recognized.
EA-ADPTR-4
Units: inches [mm]
Dimensions
0.333
[8.5]
Units: inches [mm]
8
9
5
6
1
2
3
+/-
0
• Enclosure Mounting
• Operating Temperature
• Storage Temperature
• Humidity
• Environmental air
• Vibration
EA-ADPTR-4
0.412
[10.5]
0.751
[19.1]
1.894” [47.1 mm]
29.63 oz. (840 g)
*Note: The Touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same time, an unexpected object may be
activated.
None
Minimum of 500,000 cycles
(8) mounting clips, EA-MG-BZ2-BRK, included.
Note: The C-more 6” Micro-Graphic panel is installed into the keypad bezel using the
(4) mounting clips, EA-MG-BZ2-BRK, that are supplied with the panel.
• Shock
0 to 50 °C (32 to 122 °F)
Maximum surrounding air temperature rating: 50 °C
-20 to 60 °C (-4 to 140 °F)
5 to 95 % RH (non-condensing)
For use in Pollution Degree 2 environment
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
NEMA ICS3-304
RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Noise Immunity
For use on a flat surface of Type 1, 4X enclosure (Indoor use only)
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382
• Dimensions
• Weight
10.000” (W) x 6.394” (H) x 2.488” (D)
[254.0 mm x 162.4 mm x 63.2 mm]
26.1 oz. [740 g]
Replacement Parts
D-SUB 15-pin to Terminal Block Adapter (EA-COMCON-3)
1.695
[43.1]
The EA-COMCON-3 adapter plugs into the 15-pin serial
port on the rear of the 6”panel to allow wire
terminal connections for an RS-422/RS-485/DH-485 PLC communication cable. UL Recognized.
EA-COMCON-3
Dimensions
Units: inches [mm]
9
5
6
1
2
3
Enter
+/-
0
1.756
[44.6]
0.687
[17.5]
Replacement mounting gasket for C-more 6” Micro-Graphic keypad bezels EA-MG6-BZ2 and EA-MG6-BZ2P
EA-MG-S6ML-FKL
Replacement function key label insert for C-more Micro-Graphic panels
(pk of 5; 3 blank, 1 F1-F5 for landscape, 1 F1-F5 for portrait)
Replacement mounting clip for C-more Micro-Graphic panel and keypad bezels (pk of 8)
Replacement DC power connector (pk of 5)
Replacement mounting gasket for C-more 6” Micro-Graphic panels
Panel Mounting Clips
Part No. EA-MG-BZ2-BRK
1.126
[28.6]
(pk of 8)
TERM
RD+
RD–
Panel Gasket
Part No. EA-MG6-S6ML-GSK
0.903
[22.9]
RD+
GND
Terminals
SD–
0.564
SD+
[14.3]
RD–
SD+
EA-COMCON-3
SD–
GND
0.282
[7.15]
0.709
[18.0]
Typical
3
CLR
1
2
Enter
+/-
0
Enter
Four directional cursor buttons, numeric
buttons, and ESC,
MENU, CLEAR and
two ENTER buttons.
Enter
Panel Thickness
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
21-Button Keypad Bezel Specifications
Part Number:
General:
• Micro-Graphic
Panels Supported
• Connection
• Power Consumption
• Keypad Button Life
EA-MG6-BZ2P
EA1-S6ML, EA1-S6MLW, EA1-T6CL
Connects with expansion connector on the rear of the C-more 6” Micro-Graphic panel.
None
Minimum of 500,000 cycles
(8) mounting clips, EA-MG-BZ2-BRK, included.
• Enclosure Mounting
Note: The C-more 6” Micro-Graphic panel is installed into the keypad bezel using the
(4) mounting clips, EA-MG-BZ2-BRK, that are supplied with the panel.
Environmental:
• Operating Temperature
• Storage Temperature
• Humidity
• Environmental air
• Vibration
• Shock
• Noise Immunity
0 to 50 °C (32 to 122 °F)
Maximum surrounding air temperature rating: 50 °C
-20 to 60 °C (-4 to 140 °F)
5 to 95 % RH (non-condensing)
For use in Pollution Degree 2 environment
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
NEMA ICS3-304
RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
For use on a flat surface of Type 1, 4X enclosure (Indoor use only)
• Enclosure
• Agency Approvals
Physical:
• Dimensions
• Weight
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382
6.394” (W) x 10.000” (H) x 2.488” (D)
[162.4 mm x 254.0 mm x 63.2 mm]
26.1 oz. [740 g]
Clear Screen Overlay
4.913
[124.8]
EA-6-COV2
EA-6-COV2
0.197
[5.0]
Dimensions
0.157
[4.0]
3.795
[96.4]
DC Power Connector
Part No. EA-MG-DC-CON
Step 1
(pk of 5)
Step 3
Remove the overlay from the package
Keypad Bezel Gasket
Part No. EA-MG6-BZ2-GSK
(pk of 5; 3 blank, 1 F1-F5 for
landscape, 1 F1-F5 for portrait)
Step 2
Remove the paper backing from
the overlay
0.563
[14.3]
6
Function Keys Label Inserts
Part No. EA-MG6-S6ML-FKL
KOYO ELECTRONICS INDUSTRIES CO., LTD.
R
9
5
Description
EA-MG-BZ2-BRK
EA-MG-DC-CON
EA-MG6-S6ML-GSK
EA-MG6-BZ2-GSK
Country of Origin
1.873
[47.6]
8
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
EA1-S6ML, EA1-S6MLW, EA1-T6CL
Connects with expansion connector on the rear of the C-more 6” Micro-Graphic panel.
Date code
4.803
[122.0]
8
4
CLR
Esc
EA-MG6-BZ2
Part Number
Units: inches [mm]
Step 4 - Install the new insert
into the slot in the side of the
panel and lock tab into place.
7
Menu
R
21 – 28 oz-in [0.15 – 0.2 Nm]
7
4
GASKET
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Enclosure
• Agency Approvals
Physical:
KOYO ELECTRONICS INDUSTRIES CO., LTD.
0.793
[20.2]
Esc
Menu
10.000
[254.0]
9.195
[233.5]
Environmental:
Date code
1.873
[47.6]
0.04” – 0.2” [1 – 5 mm]
Step 3 - If desired, print and
apply self adhesive labels to
the blank insert.
7
4
1.882
[47.8]
0.394
[10.0]
Four directional
cursor buttons,
numeric buttons and
ESC, MENU, CLEAR
and ENTER buttons.
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
Country of Origin
IOIOI – PLC
Step 2 - Remove the
protective film from the
blank key label insert.
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL file E157382, CSA file 234884
Customizing the Function Keys Label Insert
MOUNTING CLIP
(8) places
2.094
[53.2]
20-Button Keypad Bezel Specifications
5–95% RH (non-condensing)
For use in Pollution Degree 2 environment
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction per axis,
on 3 mutually perpendicular axes (total of 18 shocks)
NEMA ICS3-304 ( EN61131-2 )
RFI, (145MHz, 440Mhz 10W @ 10cm)
Impulse 1000V @ 1μS pulse
EN61000-4-2 (ESD), EN61000-4-3 (RFI), EN61000-4-4 (FTB) , EN61000-4-5 (Serge)
EN61000-4-6 (Conducted), EN61000-4-8 (Power frequency magnetic field immunity)
For use on a flat surface of Type 1, 4X enclosure (Indoor use only)
CLR
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
Fixed fonts: 6x6, 6x8, 8x16, 16x16, 32x16, 32x32, and Windows fonts
USB Bus Power (Programming)
Menu
0.382
[9.7]
+1
143.0 –0
Units: Inches [mm]
Enter
Esc
+0.04
5.630 –0.00
0.382
[9.7]
EA-MG6-BZ2 Keypad
Bezel Dimensions
Panel Thickness
6.850” (W) x 5.331” (H) x 2.130” (D) [174.0 mm x 135.4 mm x 54.1 mm] (Landscape Mode)
5.331” (W) x 6.850” (H) x 2.130” (D) [135.4 mm x 174.0 mm x 54.1 mm] (Portrait Mode)
Step 1 - Remove existing
function key label insert
using a small tool such as
jeweler’s screw driver.
5
TERM
9
4
Enter
MOUNTING CLIP
SCREW TORQUE RANGE
21 - 28 oz-in [0.15-0.2 Nm]
Lines, Rectangles, Circles and Frames
13 A for 800 µs
• Enclosure Mounting
Thickness Range
• Mounting Clip Screw
Torque Range
• Depth from bezel rear
with options Module
• Weight
CLR
8
GASKET
Mounting Clip Screw Torque
Push Button, Switch, Indicator Button, Indicator Light, Graphic Indicator Light, Numeric Display, Numeric
Entry, Inc/Dec Value, Bar Graph, Bitmap Button, Static Bitmap, Dynamic Bitmap, Recipe Button, Static Text,
Lookup Text, Dynamic Text, Screen Change Push Button, Screen Selector, Adjust Contrast, Function, Key
Configuration Object, Real Time Graphics Line Graph, Analog Meter.
4.5 A for 800 µs
Enclosure Mounting Thickness
Yes – used with optional Keypad Bezels, EA-MG6-BZ2 & EA-MG6-BZ2P
• Maximum Inrush Current
• Acceptable External
Power Drop Duration
Environmental:
6.394
[162.4]
5.588
[141.9]
15-pin D-sub serial communications port (RS-232, RS-485 / 422).
• Dimensions
Menu
7
MOUNTING CLIP (Qty: 8)
SCREW TORQUE RANGE
21 - 28 oz-in [0.15 - 0.2 Nm]
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
Yes
Type AGC fast acting glass fuse,
750 mA, 250 VAC, ADC p/n AGC-75
Esc
3276 kBytes
Up to 999 – limited by project memory usage
R0.59 [R1.5]
0.382
[9.7]
MOUNTING CLIP (Qty:8)
SCREW TORQUE RANGE
21 - 28 oz-in [0.15 - 0.2 Nm]
MOUNTING CLIP
(8) places
No fuse required when directly connected to a PC
with recommended cable.
• Enclosure
• Agency Approvals
Physical:
Units: Inches [mm]
2.094 1.882
[53.2] [47.8]
0.394
[10.0]
• Recommended Fuse
• Noise Immunity
0.382
[9.7]
Units: Inches [mm]
5.331
[135.4]
Analog resistive, single touch*
2W
• Shock
+1
234.6 –0
82 gram force [0.8 N] maximum
• Power Consumption
+0.04
9.236 –0.00
No
• Vibration
CUTOUT
Units: Inches [mm]
White
• Input Power
CUTOUT
OUTLINE
+1
–0
10.000
[254.0]
9.195
[233.5]
• Storage Temperature
• Humidity
• Environmental Air
6.850
[174.0]
.236
[6.0]
LED
• Input Voltage Range
143.0
EA-MG6-BZ2 Keypad
Bezel Dimensions
• Operating Temperature
CUTOUT
CUTOUT
OUTLINE
0.382
[9.7]
BEZEL
OUTLINE
R0.59 [R1.5]
GASKET
3, 9 o’clock axis –> 50 degrees
6 o’clock axis –> 50 degrees
12 o’clock axis –> 45 degrees
• Static Shapes
• Displayable Fonts
Electrical:
MOUNTING CLIP
(4) places
BEZEL
OUTLINE
0.382
[9.7]
+0.04
Adjusted from the panel’s built-in configuration setup menu
• Keypad Function Button LEDs
• Programming Port
• Serial Communications
• Expansion Connection
Screen Objects:
+0.04
+1
234.6 –0
0.382
[9.7]
5.630 –0.00
4.535” (W) x 3.400” (H) [115.2 mm x 86.4 mm]
EA-MG6-BZ2P
Cutout Dimensions
9.236 –0.00
2.13
1.453
[54.1] 1.689 [36.9]
[42.9]
4.574” (W) x 3.483” (H) [116.2 mm x 87.4 mm]
Backlight:
• Type
• Color
• User Replaceable
Touch Screen:
•Type
• Operation
• Life
Features:
• User Memory
• Number of Screens
• Beep (Internal)
NOTE: Panel shown in
Landscape (Horizontal)
orientation
EA-MG6-BZ2P
Keypad Bezel
EA-MG6-BZ2
Cutout Dimensions
0.382
[9.7]
6.295
[159.9]
32768 colors
• Display Brightness
(Reference)
EA1-T6CL
Panel Dimensions
1.605
[40.8]
EA-MG6-BZ2
Keypad Bezel
21 Button Landscape (Horizontal) Keypad Bezel
Align the overlay with the screen and
press the adhesive firmly into place
*NOTE: The protective
cover ships with a thin
protective sheet on the
face of the cover that
needs to be carefully
removed. If your panel
Step 4
is not clear, the protective sheet may not have Remove the protective film*
been removed.
Units: inches [mm]
Data Sheet: EA1-MG6CL-QSG
Rev. E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement