Fane Pro Audio Catalog
TECHNICAL SPECIFICATIONS PACK
PRO AUDIO
PRO AUDIO
WWW. FA N EPR O A U D IO . C O M
PRO AUDIO
SV-8
8” two-way passive speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
95 dB @ 1w/1m
119 dB continuous
122 dB
125 dB
Frequency Response (-6dB)
58 - 18500 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 60° rotatable
Recommended Amplifier
≤ 500 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
SV-8
250 w RMS (EIA 426A standard)
500 w
1000 w
50 Hz 18 dB/oct Butterworth
70 to 140 Hz 24 dB/oct Linkwitz-Riley
Passive @ 3 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 8” (200 mm)
diameter, 2” high temperature voice coil on glass
fibre former
High Frequency Driver
Fane Compression Driver 8Ω impedance, 1” (25
mm) exit, 1.34” (34 mm) voice coil, Titanium
diaphragm
| 8” two-way passive speaker
APPLICATIONS
SV-8 loudspeaker is suitable for near field main PA reinforcement with
subwoofer, portable system or permanent installation, wall, stand,
or suspension, monitoring for vocals, delay fill or under balcony
complementary diffusion.
FEATURES
• 250 w RMS power handling (EIA 8 hrs Standard)
• Equipped with premium Fane Drivers
• 80° x 60° constant directivity low resonance rotatable glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
ADDITIONAL SPECIFICATIONS
Flying Hardware
5x M8 points with internal metal brackets, 4x M8
points compatible with Powerdrive Type 75 mounting accessories or equivalent omnimount system
Pole Mount
Yes with optional adapter
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
Finish
CNC made with tongue and groove assembly, 15
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
430 x 280 x 298 mm
Shipping Carton Size (HxWxD)
494 x 344 x 352 mm
Weight
Optional Accessories
10 kg net
11.5 kg gross
M8 Eye bolt kit, Wall mounting bracket, U Mounting
bracket
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-8
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
8” two-way passive speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a passive, 2 way type consisting of one 8”
16000Hz). Efficiency on axis shall be 95dB/1W/1m and maximum SPL
(200mm) direct radiating reflex loaded low frequency transducer and one
shall be 119B continuous / 125dB peak. Nominal impedance shall be 8Ω.
1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver that is
The multi-angled enclosure shall be of a void free multi-laminate birch
mounted on a constant directivity elliptic rotatable glass fibre horn that
ply construction with sealed internal bracing, multi position 35mm pole
provides a nominal coverage angle of 80° (horizontal) by 60° (vertical).
mount and threaded M8 inserts for wall and ceiling mounting. The screws
The frequency response shall be 65 to 18000Hz in half space with less
shall be stainless steel 316L with 200 hours coating per ASTM-B117. The
than ± 3dB variation. Low and high frequency sections shall be integrated
finish shall be a black matt multi layer HardTex water based painting with
by an internal 3kHz passive crossover network with 250v polypropylene
hardness higher than 75Hv. The front of the enclosure shall be protected
capacitors, Air core inductors on HF, aluminium housed resistors and
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
18dB/oct slopes. Power handling shall be 250W RMS, 1000W peak
acoustically transparent grille. Dimensions shall be (HxWxD) 430 x 280 x
by EIA 426A standard (8 hours pink noise) average wideband (200-
298 mm and Weight 10kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-10
10” two-way passive speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
95 dB @ 1w/1m
120 dB continuous
123 dB
126 dB
Frequency Response (-6dB)
51 - 18500 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 60°
Recommended Amplifier
≤ 600 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
SV-10
300 w RMS (EIA 426A standard)
600 w
1200 w
50 Hz 18 dB/oct Butterworth
70 to 140 Hz 24 dB/oct Linkwitz-Riley
Passive @ 2.6 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 10” (250 mm)
diameter, 3” high temperature voice coil on glass
fibre former
High Frequency Driver
Fane Compression Driver 8Ω impedance, 1” (25
mm) exit, 1.34” (34 mm) voice coil, Titanium
diaphragm
| 10” two-way passive speaker
APPLICATIONS
SV-10 loudspeaker is suitable for near field main PA reinforcement with
subwoofer, portable system or permanent installation, wall, stand, or
suspension, monitoring for vocals and instruments, delay fill or under
balcony complementary diffusion.
FEATURES
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm Metal
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
• 300 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 60° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
10x M8 points with internal metal brackets, 4x M8
points compatible with Powerdrive Type 75 mounting accessories or equivalent omnimount system
Finish
CNC made with tongue and groove assembly, 15
mm and 18 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
530 x 350 x 330 mm
Shipping Carton Size (HxWxD)
594 x 414 x 394 mm
Weight
Optional Accessories
13 kg net
15 kg gross
M8 Eye bolt kit
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-10
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
10” two-way passive speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a passive, 2 way type consisting of one 10”
16000Hz). Efficiency on axis shall be 95dB/1W/1m and maximum SPL
(250mm) direct radiating reflex loaded low frequency transducer and one
shall be 120B continuous / 126dB peak. Nominal impedance shall be 8Ω.
1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver that is
The multi-angled enclosure shall be of a void free multi-laminate birch
mounted on a constant directivity elliptic glass fibre horn that provides
ply construction with sealed internal bracing, multi position 35mm pole
a nominal coverage angle of 80° (horizontal) by 60° (vertical). The
mount and threaded M8 inserts for wall and ceiling mounting. The screws
frequency response shall be 56 to 18000Hz in half space with less than
shall be stainless steel 316L with 200 hours coating per ASTM-B117. The
± 3dB variation. Low and high frequency sections shall be integrated by
finish shall be a black matt multi layer HardTex water based painting with
an internal 2.6kHz passive crossover network with 400v polypropylene
hardness higher than 75Hv. The front of the enclosure shall be protected
capacitors, Air core inductors on HF, aluminium housed resistors and
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak
acoustically transparent grille. Dimensions shall be (HxWxD) 530 x 350 x
by EIA 426A standard (8 hours pink noise) average wideband (200-
330 mm and Weight 13kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-12
12” two-way passive speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
97 dB @ 1w/1m
122 dB continuous
125 dB
128 dB
Frequency Response (-6dB)
50 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 60°
Recommended Amplifier
≤ 600 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
SV-12
300 w RMS (EIA 426A standard)
600 w
1200 w
45 Hz 18 dB/oct Butterworth
60 to 140 Hz 24 dB/oct Linkwitz-Riley
Passive @ 2.2 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 12” (300 mm)
diameter, 2.5” high temperature voice coil on glass
fibre former
High Frequency Driver
1” (25 mm) exit, 1.7” (44 mm) voice coil, Heat
treated Titanium diaphragm
| 12” two-way passive speaker
APPLICATIONS
SV-12 loudspeaker is suitable for near field main PA reinforcement with or
without subwoofer, portable system or permanent installation, wall, stand,
or suspension, monitoring for vocals and instruments, side fill in small
stages, delay fill or under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 300 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 60° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
12x M8 points with internal metal brackets
Finish
CNC made with tongue and groove assembly, 15
mm and 18 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
590 x 380 x 360 mm
Shipping Carton Size (HxWxD)
654 x 444 x 424 mm
Weight
• Touring grade HardTex coating with black matt finish
Optional Accessories
20 kg net
23 kg gross
M8 Eye bolt kit
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-12
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
12” two-way passive speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a passive, 2 way type consisting of one 12”
16000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL
(300mm) direct radiating reflex loaded low frequency transducer and one
shall be 122dB continuous / 128dB peak. Nominal impedance shall be
1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is
8Ω. The multi-angled enclosure shall be of a void free multi-laminate birch
mounted on a constant directivity elliptic glass fibre horn that provides
ply construction with sealed internal bracing, multi position 35mm pole
a nominal coverage angle of 80° (horizontal) by 60° (vertical). The
mount and threaded M8 inserts for wall and ceiling mounting. The screws
frequency response shall be 56 to 18500Hz in half space with less than
shall be stainless steel 316L with 200 hours coating per ASTM-B117. The
± 3dB variation. Low and high frequency sections shall be integrated by
finish shall be a black matt multi layer UltraTex water based painting with
an internal 2.2kHz passive crossover network with 400v polypropylene
hardness higher than 75Hv. The front of the enclosure shall be protected
capacitors, Air core inductors on HF, aluminium housed resistors and
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak
acoustically transparent grille. Dimensions shall be (HxWxD) 590 x 380 x
by EIA 426A standard (8 hours pink noise) average wideband (200-
360 mm and Weight 20kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-15
15” two-way passive speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
98 dB @ 1w/1m
126 dB continuous
129 dB
132 dB
Frequency Response (-6dB)
48 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 60°
Recommended Amplifier
≤ 1200 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
SV-15
600 w RMS (EIA 426A standard)
1200 w
2400 w
40 Hz 18 dB/oct Butterworth
60 to 140 Hz 24 dB/oct Linkwitz-Riley
Passive @ 2 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 15” (380 mm)
diameter, 3” high temperature voice coil on glass
fibre former
High Frequency Driver
1” (25 mm) exit, 1.7” (44 mm) voice coil, Heat
treated Titanium diaphragm
| 15” two-way passive speaker
APPLICATIONS
SV-15 loudspeaker is suitable for near field main PA reinforcement with or
without subwoofer, portable system or permanent installation, wall, stand,
or suspension, monitoring for vocals and instruments, side fill in small
stages, delay fill or under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
Finish
• 600 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 60° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
12x M8 points with internal metal brackets
CNC made with tongue and groove assembly, 18
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
708 x 442 x 446 mm
Shipping Carton Size (HxWxD)
772 x 506 x 510 mm
Weight
Optional Accessories
28 kg net
31 kg gross
M8 Eye bolt kit
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-15
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
15” two-way passive speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a passive, 2 way type consisting of one 15”
16000Hz). Efficiency on axis shall be 98dB/1W/1m and maximum SPL
(380mm) direct radiating reflex loaded low frequency transducer and
shall be 122dB continuous / 128dB peak. Nominal impedance shall be
one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver
8Ω. The multi-angled enclosure shall be of a void free multi-laminate birch
that is mounted on a constant directivity elliptic glass fibre horn that
ply construction with sealed internal bracing, multi position 35mm pole
provides a nominal coverage angle of 80° (horizontal) by 60° (vertical).
mount and threaded M8 inserts for wall and ceiling mounting. The screws
The frequency response shall be 54 to 18500Hz in half space with less
shall be stainless steel 316L with 200 hours coating per ASTM-B117. The
than ± 3dB variation. Low and high frequency sections shall be integrated
finish shall be a black matt multi layer HardTex water based painting with
by an internal 2kHz passive crossover network with 400v polypropylene
hardness higher than 75Hv. The front of the enclosure shall be protected
capacitors, Air core inductors on HF, aluminium housed resistors and
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
18dB/oct slopes. Power handling shall be 600W RMS, 2400W peak
acoustically transparent grille. Dimensions shall be (HxWxD) 708 x 442 x
by EIA 426A standard (8 hours pink noise) average wideband (200-
446 mm and Weight 28kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-152
15” pseudo three-way passive speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
4Ω
100 dB @ 1w/1m
130 dB continuous
133 dB
136 dB
Frequency Response (-6dB)
46 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
60° x 40°
Recommended Amplifier
≤ 2000 w @ 4Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
SV-152
1000 w RMS (EIA 426A standard)
2000 w
4000 w
30 Hz 18 dB/oct Butterworth
55 to 125 Hz 24 dB/oct Linkwitz-Riley
Passive @ 2 kHz
TBC
Low Frequency Driver
2x Fane Transducers, 8Ω impedance, 15” (380 mm)
diameter chassis, 3” high temperature voice coil on
glass fibre former
High Frequency Driver
1” (25 mm) exit. 1.7” (44 mm) voice coil, Heat
treated Titanium diaphragm
| 15” pseudo three-way passive speaker
APPLICATIONS
SV-152 loudspeaker is suitable for near field main PA reinforcement
with or without subwoofer, portable system or permanent installation,
monitoring for drums, sidefill in small stages or delay fill complementary
diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
Not available
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
Finish
• 1000w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 60° x 40° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
8x M8 points with internal metal brackets
CNC made with tongue and groove assembly, 18
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
1125 x 442 x 468 mm
Shipping Carton Size (HxWxD)
1179 x 496 x 522 mm
Weight
Optional Accessories
52 kg net
57 kg gross
M8 Eye bolt kit
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-152
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
15” Pseudo three-way passive speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a passive, pseudo 3 way type consisting of
16000Hz) efficiency on axis shall be 100dB/1W/1m and maximum SPL
two 15” (380 mm) direct radiating reflex loaded low frequency transducer
shall be 130dB continuous / 136dB peak. Nominal impedance shall
and one 1” (25 mm) exit / 1.7” (44 mm) voice coil HF compression driver
be 4Ω. The enclosure shall be of a void free multi-laminate birch ply
that is mounted on a constant directivity elliptic glass fibre horn that
construction with sealed internal bracing and threaded M8 inserts for
provides a nominal coverage angle of 60°(horizontal) by 40° (vertical). The
ceiling mounting. The screws shall be Stainless Steel 316L with 200
frequency response shall be 52 to 18500Hz in half space with less than
hours coating per ASTM-B117. The finish shall be a black mat multi layer
± 3dB variation. Low and high frequency sections shall be integrated
HardTex water based painting with hardness higher than 75Hv. The front
by an internal 2kHz passive crossover network with 400v polypropylene
of the enclosure shall be protected by a black mat dual layer coated
capacitors, Air core inductors on HF, aluminium housed resistors and
(powder + acrylic) 1.5 mm thick steel acoustically transparent grille.
18dB/oct slopes. Power handling shall be 1000w RMS, 4000w peak
Dimensions shall be (HxWxD) 1125 x 442 x 468 mm and Weight 52kg.
by EIA 426A standard (8 hours pink noise). Average wideband (200-
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-115S
15” passive subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
97 dB @ 1w/1m
125 dB continuous
128 dB
131 dB
Frequency Response (-6dB)
39 - 2500 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 1200 w @ 8Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
SV-115S
700 w RMS (EIA 426A standard)
1400 w
2800 w
LPF 80 - 150 Hz 24dB/Oct BW/LR
No, active usage only, Fane recommended DSP
TBC
Fane Transducer, 8Ω impedance, 15” (380 mm)
diameter, 4” high temperature voice coil on glass
fibre former
| 15” passive subwoofer
APPLICATIONS
SV-115S subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in small to medium stages,
indoor or outdoor live performances, arenas, night clubs, houses of
worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
Finish
• High performance compact subwoofer
• 700W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
8x M8 points with internal metal brackets
CNC made with tongue and groove assembly, 18
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
545 x 505 x 605 mm
Shipping Carton Size (HxWxD)
609 x 569 x 669 mm
Weight
Optional Accessories
34 kg net
38 kg gross
Wheelboards, Abrasive resistant cover bag
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-115S
15” passive subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of one 15” (380mm) direct
ply construction with sealed internal bracing, metal 35mm pole mount
radiating reflex loaded low frequency transducer with high excursion
and threaded M8 inserts for suspension. The screws shall be stainless
ability. The frequency response shall be 44 to 2000Hz in half space with
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
less than ± 3dB variation. Power handling shall be 700W RMS, 2800W
a black matt multi layer HardTex water based painting with hardness
peak by EIA 426A standard (8 hours pink noise) average wideband (50-
higher than 75Hv. The front of the enclosure shall be protected by a black
1000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
shall be 125dB continuous / 131dB peak. Nominal impedance shall be
transparent grille. Dimensions shall be (HxWxD) 545 x 505 x 605 mm and
8Ω. The stackable enclosure shall be of a void free multi-laminate birch
Weight 34kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-118S
18” passive subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
99 dB @ 1w/1m
128 dB continuous
131 dB
134 dB
Frequency Response (-6dB)
30 - 1300 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 1600 w @ 8Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
SV-118S
800 w RMS (EIA 426A standard)
1600 w
3200 w
LPF 70 - 125 Hz 24dB/Oct BW/LR
No, active usage only, Fane recommended DSP
TBC
Fane Transducer, 8Ω impedance, 18” (460 mm)
diameter, 4” high temperature voice coil on glass
fibre former
| 18” passive subwoofer
APPLICATIONS
SV-118S subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in small to medium stages,
indoor or outdoor live performances, arenas, night clubs, houses of
worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• High performance compact subwoofer
• 30Hz usable frequency
• 800 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
Finish
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
600 x 561 x 705 mm
Shipping Carton Size (HxWxD)
664 x 625 x 769 mm
Weight
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
8x M8 points with internal metal brackets
Optional Accessories
45 kg net
50 kg gross
Wheelboards, abrasive resistant cover bag
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-118S
18” passive subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of one 18” (460mm) direct
ply construction with sealed internal bracing, 35mm metal pole mount
radiating reflex loaded low frequency transducer with high excursion
and threaded M8 inserts for suspension. The screws shall be stainless
ability. The frequency response shall be 35 to 1300Hz in half space with
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
less than ± 3dB variation. Power handling shall be 800W RMS, 3200W
a black matt multi layer HardTex water based painting with hardness
peak by EIA 426A standard (8 hours pink noise) average wideband (50-
higher than 75Hv. The front of the enclosure shall be protected by a black
1000Hz). Efficiency on axis shall be 99dB/1W/1m and maximum SPL
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
shall be 128dB continuous / 134dB peak. Nominal impedance shall be
transparent grille. Dimensions shall be (HxWxD) 600 x 561 x 705 mm and
8Ω. The stackable enclosure shall be of a void free multi-laminate birch
Weight 45kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-215S
2x 15” passive subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
4Ω
100 dB @ 1w/1m
131 dB continuous
134 dB
137 dB
Frequency Response (-6dB)
39 - 2500 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 2400 w @ 4Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
SV-215S
1400 w RMS (EIA 426A standard)
2800 w
5600 w
LPF 80 - 150 Hz 24dB/Oct BW/LR
No, active usage only, Fane recommended DSP
TBC
2x Fane Transducers, 8Ω impedance, 15” (380 mm)
diameter, 4” high temperature voice coil on glass
fibre former
| 2x 15” passive subwoofer
APPLICATIONS
SV-215S subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in small to medium stages,
indoor or outdoor live performances, arenas, night clubs, houses of
worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Not Available
Pole Mount
35 mm Metal
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
Finish
• High performance compact subwoofer
• 1400 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
Optional Accessories
CNC made with tongue and groove assembly, 18
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
480 x 960 x 686 mm
1024 x 544 x 750 mm
55 kg net
59 kg gross
Wheelboards
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-215S
2x 15” passive subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of two 15” (380mm) direct
ply construction with sealed internal bracing, 35mm metal pole mount
radiating reflex loaded low frequency transducer with high excursion
and threaded M8 inserts for suspension. The screws shall be stainless
ability. The frequency response shall be 44 to 2000Hz in half space with
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
less than ± 3dB variation. Power handling shall be 1400W RMS, 5600W
a black matt multi layer HardTex water based painting with hardness
peak by EIA 426A standard (8 hours pink noise) average wideband (50-
higher than 75Hv. The front of the enclosure shall be protected by a black
1000Hz). Efficiency on axis shall be 100dB/1W/1m and maximum SPL
matt dual layer coated (powder + acrylic) 1.8 mm thick steel acoustically
shall be 131dB continuous / 137dB peak. Nominal impedance shall be
transparent grille. Dimensions shall be (HxWxD) 480 x 960 x 686 mm and
4Ω. The stackable enclosure shall be of a void free multi-laminate birch
Weight 55kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-218S
2x 18” passive subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
4Ω
102 dB@ 1w/1m
134 dB continuous
137 dB
140 dB
Frequency Response (-6dB)
32 - 1300 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 3200 w @ 4Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
SV-218S
1600 w RMS (EIA 426A standard)
3200 w
6400 w
LPF 70 - 125 Hz 24dB/Oct BW/LR
No, active usage only, Fane recommended DSP
TBC
2x Fane Transducers, 8Ω impedance, 18” (460 mm)
diameter, 4” high temperature voice coil on glass
fibre former
| 2x 18” passive subwoofer
APPLICATIONS
SV-218S subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in medium to large stages,
indoor or outdoor live performances, arenas, stadiums, night clubs,
houses of worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Not Available
Pole Mount
35 mm Metal
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• High performance compact subwoofer
• 30 Hz usable frequency
• 1600 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
Finish
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
561 x 1060 x 768 mm
Shipping Carton Size (HxWxD)
625 x 1124 x 832 mm
Weight
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Optional Accessories
85 kg net
91 kg gross
Wheelboards
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SV-218S
2x 18” passive subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of two 18” (460mm) direct
ply construction with sealed internal bracing, 35mm metal pole mount
radiating reflex loaded low frequency transducer with high excursion
and threaded M8 inserts for suspension. The screws shall be stainless
ability. The frequency response shall be 36 to 1300Hz in half space with
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
less than ± 3dB variation. Power handling shall be 1600W RMS, 6400W
a black matt multi layer HardTex water based painting with hardness
peak by EIA 426A standard (8 hours pink noise) average wideband (50-
higher than 75Hv. The front of the enclosure shall be protected by a black
1000Hz). Efficiency on axis shall be 102dB/1W/1m and maximum SPL
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
shall be 134dB continuous / 140dB peak. Nominal impedance shall be
transparent grille. Dimensions shall be (HxWxD) 1060 x 561 x 768 mm
4Ω. The stackable enclosure shall be of a void free multi-laminate birch
and Weight 85kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-8
8” two-way active speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
95 dB @ 1w/1m
119 dB continuous
122 dB
125 dB
Frequency Response (-6dB)
58 - 18500 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Low Cut
Full Range:
With Sub:
Preset EQ’s
SVA-8
250 w RMS (EIA 426A standard)
500 w
1000 w
80° x 60° rotatable
Powersoft D-cell504, Class D power amplifier
module
50 Hz 18 dB/oct Butterworth
70 to 140 Hz 24 dB/oct Linkwitz-Riley
x4
Low Frequency Driver
Fane Transducer, 8Ω impedance, 8” (200 mm)
diameter, 2” high temperature voice coil on glass
fibre former
High Frequency Driver
Fane Compression Driver 8Ω impedance, 1” (25
mm) exit, 1.34” (34 mm) voice coil, Titanium
diaphragm
| 8” two-way active speaker
APPLICATIONS
The SVA-8 is a self powered loudspeaker suitable for near field main PA
reinforcement with subwoofers, portable system or permanent installation
with wall, stand, or suspension, monitoring for vocals, delay fill or under
balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
Finish
• 250 w RMS power handling (EIA 8 hrs Standard)
• Equipped with premium Fane Drivers
• 80° x 60° constant directivity low resonance rotatable glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
• Powered by Powersoft amplification
3x M8 points with internal metal brackets
CNC made with tongue and groove assembly, 15
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
430 x 280 x 298 mm
Shipping Carton Size (HxWxD)
494 x 344 x 352 mm
Weight
Optional Accessories
11 kg net
13.5 kg gross
M8 Eye bolt kit, 35 mm pole mount adaptor
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-8
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
8” two-way active speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a active, 2 way type consisting of one 8”
shall be 119B continuous / 125dB peak. Nominal impedance shall be 8Ω.
(200mm) direct radiating reflex loaded low frequency transducer and
The multi-angled enclosure shall be of a void free multi-laminate birch
one 1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver
ply construction with sealed internal bracing, 35mm metal pole mount
that is mounted on a constant directivity glass fibre horn that provides a
and threaded M8 inserts for suspension. The screws shall be stainless
nominal coverage angle of 80ÔøΩ (horizontal) by 60ÔøΩ (vertical). The
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
frequency response shall be 65 to 18000Hz in half space with less than
black matt multi layer HardTex water based painting with hardness higher
± 3dB variation. Low and high frequency sections shall be integrated by
than 75Hv. The front of the enclosure shall be protected by a black matt
an internal 3kHz active crossover network with Right Phase technology
dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
and 18dB/oct slopes. Power handling shall be 250W RMS, 1000W peak
transparent grille. Dimensions shall be (HxWxD) 430 x 280 x 298 mm and
by EIA 426A standard (8 hours pink noise) average wideband (200-
Weight 11kg.
16000Hz). Efficiency on axis shall be 95dB/1W/1m and a maximum SPL
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-10
10” two-way active speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
95 dB @ 1w/1m
120 dB continuous
123 dB
126 dB
Frequency Response (-6dB)
51 - 18500 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Low Cut
Full Range:
With Sub:
Preset EQ’s
SVA-10
300 w RMS (EIA 426A standard)
600 w
1200 w
80° x 60°
Powersoft D-cell504, Class D power amplifier
module
50 Hz 18 dB/oct Butterworth
70 to 140 Hz 24 dB/oct Linkwitz-Riley
x4
Low Frequency Driver
Fane Transducer, 8Ω impedance, 10” (250 mm)
diameter, 3” high temperature voice coil on glass
fibre former
High Frequency Driver
Fane Compression Driver 8Ω impedance, 1” (25
mm) exit, 1.34” (34 mm) voice coil, Titanium
diaphragm
| 10” two-way active speaker
APPLICATIONS
The SVA-10 is a self powered loudspeaker suitable for near field main
PA reinforcement with subwoofers, portable system or permanent
installation, wall, stand, or suspension, monitoring for vocals, delay fill or
under balcony.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
• 300 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 60° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
Finish
CNC made with tongue and groove assembly, 15
mm and 18 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
530 x 350 x 330 mm
Shipping Carton Size (HxWxD)
594 x 414 x 394 mm
Weight
• Touring grade HardTex coating with black matt finish
• Powered by Powersoft amplification
10x M8 points with internal metal brackets
Optional Accessories
14 kg net
16 kg gross
M8 Eye bolt kit
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-10
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
10” two-way active speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a active, 2 way type consisting of one 10”
shall be 120B continuous / 126dB peak. Nominal impedance shall be 8Ω.
(250mm) direct radiating reflex loaded low frequency transducer and one
The multi-angled enclosure shall be of a void free multi-laminate birch
1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver that is
ply construction with sealed internal bracing, 35mm metal pole mount
mounted on a constant directivity elliptic glass fibre horn that provides a
and threaded M8 inserts for suspension. The screws shall be stainless
nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
response shall be 56 to 18000Hz in half space with less than ± 3dB
a black matt multi layer HardTex water based painting with hardness
variation. Low and high frequency sections shall be integrated by an
higher than 75Hv. The front of the enclosure shall be protected by a black
internal 2.6kHz active crossover network with Right Phase technology
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
and 18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak
transparent grille. Dimensions shall be (HxWxD) 530 x 350 x 330 mm and
by EIA 426A standard (8 hours pink noise) average wideband (200-
Weight 14kg.
16000Hz). Efficiency on axis shall be 95dB/1W/1m and maximum SPL
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-12
12” two-way active speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
4Ω
97 dB @ 1w/1m
122 dB continuous
125 dB
128 dB
Frequency Response (-6dB)
50 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Low Cut
Full Range:
With Sub:
Preset EQ’s
SVA-12
300 w RMS (EIA 426A standard)
600 w
1200 w
80° x 60°
Powersoft D-cell504, Class D power amplifier
module
45 Hz 18 dB/oct Butterworth
60 to 140 Hz 24 dB/oct Linkwitz-Riley
x4
Low Frequency Driver
Fane Transducer, 8Ω impedance, 12” (300 mm)
diameter, 2.5” high temperature voice coil on glass
fibre former
High Frequency Driver
1” (25 mm) exit, 1.7” (44 mm) voice coil, Heat
treated Titanium diaphragm
| 12” two-way active speaker
APPLICATIONS
The SVA-12 is a self powered loudspeaker suitable for near field main
PA reinforcement with subwoofers, portable system or permanent
installation, wall, stand, or suspension, monitoring for vocals, delay fill or
under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
• 300 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 60° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
Finish
CNC made with tongue and groove assembly, 15
mm and 18 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
590 x 380 x 360 mm
Shipping Carton Size (HxWxD)
654 x 444 x 424 mm
Weight
• Touring grade HardTex coating with black matt finish
• Powered by Powersoft amplification
12x M8 points with internal metal brackets
Optional Accessories
21 kg net
24 kg gross
M8 Eye bolt kit
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-12
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
12” two-way active speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a active, 2 way type consisting of one 12”
shall be 122dB continuous / 128dB peak. Nominal impedance shall be
(300mm) direct radiating reflex loaded low frequency transducer and one
4Ω. The multi-angled enclosure shall be of a void free multi-laminate birch
1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is
ply construction with sealed internal bracing, 35mm metal pole mount
mounted on a constant directivity elliptic glass fibre horn that provides a
and threaded M8 inserts for suspension. The screws shall be stainless
nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
response shall be 56 to 18500Hz in half space with less than ± 3dB
a black matt multi layer UltraTex water based painting with hardness
variation. Low and high frequency sections shall be integrated by an
higher than 75Hv. The front of the enclosure shall be protected by a black
internal 2.2kHz active crossover network with Right Phase technology
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
and 18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak
transparent grille. Dimensions shall be (HxWxD) 590 x 380 x 360 mm and
by EIA 426A standard (8 hours pink noise) average wideband (200-
Weight 21kg.
16000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-15
15” two-way active speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
98 dB @ 1w/1m
126 dB continuous
129 dB
132 dB
Frequency Response (-6dB)
48 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Low Cut
Full Range:
With Sub:
Preset EQ’s
SVA-15
600 w RMS (EIA 426A standard)
1200 w
2400 w
80° x 60°
Powersoft Digimod 1500 IS, Class D power amplifier module
40 Hz 18 dB/oct Butterworth
60 to 140 Hz 24 dB/oct Linkwitz-Riley
x4
Low Frequency Driver
Fane Transducer, 8Ω impedance, 15” (380 mm)
diameter, 3” high temperature voice coil on glass
fibre former
High Frequency Driver
1” (25 mm) exit, 1.7” (44 mm) voice coil, Heat
treated Titanium diaphragm
| 15” two-way active speaker
APPLICATIONS
The SVA-15 is a self powered loudspeaker suitable for near field main
PA reinforcement with subwoofers, portable system or permanent
installation, wall, stand, or suspension, monitoring for vocals, delay fill or
under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
Finish
• 600 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 60° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
• Powered by Powersoft amplification
12x M8 points with internal metal brackets
CNC made with tongue and groove assembly, 18
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
708 x 442 x 446 mm
Shipping Carton Size (HxWxD)
772 x 506 x 510 mm
Weight
Optional Accessories
30 kg net
32 kg gross
M8 Eye bolt kit
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-15
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
15” two-way active speaker |
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a active, 2 way type consisting of one 15”
shall be 122dB continuous / 128dB peak. Nominal impedance shall be
(380mm) direct radiating reflex loaded low frequency transducer and one
8Ω. The multi-angled enclosure shall be of a void free multi-laminate birch
1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is
ply construction with sealed internal bracing, 35mm metal pole mount
mounted on a constant directivity elliptic glass fibre horn that provides
and threaded M8 inserts for suspension. The screws shall be stainless
a nominal coverage angle of 80° (horizontal) by 60° (vertical). The
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
frequency response shall be 54 to 18500Hz in half space with less than
a black matt multi layer HardTex water based painting with hardness
± 3dB variation. Low and high frequency sections shall be integrated by
higher than 75Hv. The front of the enclosure shall be protected by a black
an internal 2kHz active crossover network with Right Phase technology
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
and 18dB/oct slopes. Power handling shall be 600W RMS, 2400W peak
transparent grille. Dimensions shall be (HxWxD) 708 x 442 x 446 mm and
by EIA 426A standard (8 hours pink noise) average wideband (200-
Weight 30kg.
16000Hz). Efficiency on axis shall be 98dB/1W/1m and maximum SPL
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-115S
15” active subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
97 dB @ 1w/1m
125 dB continuous
128 dB
131 dB
Frequency Response (-6dB)
39 - 2500 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Crossover
Preset EQ’s
Low Frequency Driver
SVA-115S
700 w RMS (EIA 426A standard)
1400 w
2800 w
Omnidirectional
Powersoft Digimod 1000 IS, Class D power amplifier module
LPF 80 - 150 Hz 24dB/Oct BW/LR
x4
Fane Transducer, 8Ω impedance, 15” (380 mm)
diameter, 4” high temperature voice coil on glass
fibre former
| 15” active subwoofer
APPLICATIONS
The SVA-115S is an active subwoofer suitable for bass reinforcement for
main PA systems, touring or permanent installations, small to medium
sized venues, indoor or outdoor stages, live performances, arenas, night
clubs, auditoriums, theatres and houses of worship.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
Finish
• High performance compact subwoofer
• 700W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
• Powered by Powersoft amplification
8x M8 points with internal metal brackets
CNC made with tongue and groove assembly, 18
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
545 x 505 x 605 mm
Shipping Carton Size (HxWxD)
609 x 569 x 669 mm
Weight
Optional Accessories
36 kg net
40 kg gross
Wheelboards
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-115S
15” active subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be active, consisting of one 15” (380mm) direct
ply construction with sealed internal bracing, 35mm metal pole mount
radiating reflex loaded low frequency transducer with high excursion
and threaded M8 inserts for suspension. The screws shall be stainless
ability. The frequency response shall be 44 to 2000Hz in half space with
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
less than ± 3dB variation. Power handling shall be 700W RMS, 2800W
a black matt multi layer HardTex water based painting with hardness
peak by EIA 426A standard (8 hours pink noise) average wideband (50-
higher than 75Hv. The front of the enclosure shall be protected by a black
1000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
shall be 125dB continuous / 131dB peak. Nominal impedance shall be
transparent grille. Dimensions shall be (HxWxD) 545 x 505 x 605 mm and
8Ω. The stackable enclosure shall be of a void free multi-laminate birch
Weight 36kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-118S
18” active subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
99 dB @ 1w/1m
128 dB continuous
131 dB
134 dB
Frequency Response (-6dB)
30 - 1300 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Crossover
Preset EQ’s
Low Frequency Driver
SVA-118S
800 w RMS (EIA 426A standard)
1600 w
3200 w
Omnidirectional
Powersoft Digimod 1000 IS, Class D power amplifier module
LPF 70 - 125 Hz 24dB/Oct BW/LR
x4
Fane Transducer, 8Ω impedance, 18” (460 mm)
diameter, 4” high temperature voice coil on glass
fibre former
| 18” active subwoofer
APPLICATIONS
The SVA-118S is an active subwoofer is suitable for bass reinforcement
for main PA systems, touring or permanent installations, small to medium
sized venues, indoor and outdoor stages, live performances, arenas,
night clubs, auditoriums, theatres and houses of worship.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
• High performance compact subwoofer
• 30Hz usable frequency
• 800 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
Finish
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
600 x 561 x 705 mm
Shipping Carton Size (HxWxD)
664 x 625 x 769 mm
Weight
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
8x M8 points with internal metal brackets
Optional Accessories
47 kg net
52 kg gross
Wheelboards
• Powered by Powersoft amplification
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-118S
18” active subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be active, consisting of one 18” (460mm) direct
ply construction with sealed internal bracing, 35mm metal pole mount
radiating reflex loaded low frequency transducer with high excursion
and threaded M8 inserts for suspension. The screws shall be stainless
ability. The frequency response shall be 35 to 1300Hz in half space with
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
less than ± 3dB variation. Power handling shall be 800W RMS, 3200W
a black matt multi layer HardTex water based painting with hardness
peak by EIA 426A standard (8 hours pink noise) average wideband (50-
higher than 75Hv. The front of the enclosure shall be protected by a black
1000Hz). Efficiency on axis shall be 99dB/1W/1m and maximum SPL
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
shall be 128dB continuous / 134dB peak. Nominal impedance shall be
transparent grille. Dimensions shall be (HxWxD) 600 x 561 x 705 mm and
8Ω. The stackable enclosure shall be of a void free multi-laminate birch
Weight 47kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-215S
2x 15” active subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
100 dB @ 1w/1m
131 dB continuous
134 dB
137 dB
Frequency Response (-6dB)
39 - 2500 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Crossover
Preset EQ’s
Low Frequency Driver
SVA-215S
700 w RMS x2 (EIA 426A standard)
1400 w
2800 w x2
Omnidirectional
Powersoft Digimod 2000HV IS, Class D power
amplifier module
LPF 80 - 150 Hz 24dB/Oct BW/LR
x4
2x Fane Transducers, 8Ω impedance, 15” (380 mm)
diameter, 3” high temperature voice coil on glass
fibre former
| 2x 15” active subwoofer
APPLICATIONS
The SVA-215S is an active subwoofer suitable for bass reinforcement for
main PA systems, touring or permanent installations in small to medium
sized venues, indoor and outdoor stages, live performances, arenas,
night clubs, auditoriums, theatres and houses of worship.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Not Available
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
Finish
• High performance compact subwoofer
• 700 w RMS x2 power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
• Powered by Powersoft amplification
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
Optional Accessories
CNC made with tongue and groove assembly, 18
mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
480 x 960 x 686 mm
1024 x 544 x 750 mm
57 kg net
61 kg gross
Wheelboards
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-215S
2x 15” active subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be active, consisting of two 15” (380mm) direct
birch ply construction with sealed internal bracing, 35mm metal pole
radiating reflex loaded low frequency transducer with high excursion
mount and threaded M8 inserts for suspension. The screws shall be
ability. The frequency response shall be 44 to 2000Hz in half space with
stainless steel 316L with 200 hours coating per ASTM-B117. The finish
less than ± 3dB variation. Power handling shall be 700W RMS x2, 2800W
shall be a black matt multi layer HardTex water based painting with
peak x2 by EIA 426A standard (8 hours pink noise) average wideband
hardness higher than 75Hv. The front of the enclosure shall be protected
(50-1000Hz). Efficiency on axis shall be 100dB/1W/1m and maximum
by a black matt dual layer coated (powder + acrylic) 1.8 mm thick steel
SPL shall be 131dB continuous / 137dB peak. Nominal impedance shall
acoustically transparent grille. Dimensions shall be (HxWxD) 960 x 480 x
be 8Ω. The stackable enclosure shall be of a void free multi-laminate
686 mm and Weight 57kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-218S
2x 18” active subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
102 dB @ 1w/1m
134 dB continuous
137 dB
140 dB
Frequency Response (-6dB)
32 - 1300 Hz
Manufacturing Consistency
± 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Amplifier Module
Recommended Crossover
Preset EQ’s
Low Frequency Driver
SVA-218S
800 w RMS x2 (EIA 426A standard)
1600 w x2
3200 w x2
Omnidirectional
Powersoft Digimod 2000HV IS, Class D power
amplifier module
LPF 70 - 125 Hz 24dB/Oct BW/LR
x4
2x Fane Transducers, 8Ω impedance, 18” (460 mm)
diameter, 4” high temperature voice coil on glass
fibre former
| 2x 18” active subwoofer
APPLICATIONS
The SVA-218S is an active subwoofer suitable for bass reinforcement for
main PA systems, touring or permanent installations, small to medium
sized venues, indoor and outdoor stages, live performances, arenas, night
clubs, auditoriums, theatres and houses of worship.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Not Available
Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES
• High performance compact subwoofer
• 30 Hz usable frequency
• 800 w RMS x2 power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
Finish
Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
561 x 1060 x 768 mm
Shipping Carton Size (HxWxD)
625 x 1124 x 832 mm
Weight
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Optional Accessories
85 kg net
91 kg gross
Wheelboards
• Powered by Powersoft amplification
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-218S
2x 18” active subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be active, consisting of two 18” (460mm) direct
birch ply construction with sealed internal bracing, 35mm metal pole
radiating reflex loaded low frequency transducer with high excursion
mount and threaded M8 inserts for suspension. The screws shall be
ability. The frequency response shall be 36 to 1300Hz in half space with
stainless steel 316L with 200 hours coating per ASTM-B117. The finish
less than ± 3dB variation. Power handling shall be 800W RMS x2, 3200W
shall be a black matt multi layer HardTex water based painting with
peak x2 by EIA 426A standard (8 hours pink noise) average wideband
hardness higher than 75Hv. The front of the enclosure shall be protected
(50-1000Hz). Efficiency on axis shall be 102dB/1W/1m and maximum
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
SPL shall be 134dB continuous / 140dB peak. Nominal impedance shall
acoustically transparent grille. Dimensions shall be (HxWxD) 1060 x 561 x
be 8Ω. The stackable enclosure shall be of a void free multi-laminate
768 mm and Weight 85kg.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-10
10” two-way passive touring speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
97 dB @ 1w/1m
122 dB continuous
125 dB
127 dB
Frequency Response (-6dB)
55 - 18500 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 50°
Recommended Amplifier
≤ 600 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
ST-10
300 w RMS (EIA 426A standard)
600 w
1200 w
45Hz 24dB/oct Butterworth
70 to 140Hz 24dB/oct Linkwitz-Riley
Passive @ 2.6 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 10” (250mm)
diameter cast frame, 2.5” high temperature voice
coil on glass fibre former
High Frequency Driver
Fane Compression Driver 8Ω impedance, 1” (25mm)
exit, 1.34” (34mm) voice coil, Titanium diaphragm
| 10” two-way passive touring speaker
APPLICATIONS
ST-10 loudspeaker is suitable for near field main PA reinforcement with or
without subwoofer, portable system or permanent installation, wall, stand,
or suspension, monitoring for vocals and instruments, delay fill or under
balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm pot
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 300W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 50° low resonance glass fibre rotatable horn
• Void-free birch plywood cabinet, tongue and groove assembly
Finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
• Touring grade HardTex coating with black matt finish
• Complete line of flying hardware accessories
8x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 15
mm and 18 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
340 x 320 x 540 mm
TBC
18 kg net
17 kg gross
TBC
• DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-10
PRO AUDIO
10” two-way passive touring speaker |
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type consisting of
16000Hz) efficiency on axis shall be 97dB/1W/1m and maximum SPL
one 10” (250mm) direct radiating reflex loaded low frequency transducer
shall be 122B continuous / 127dB peak. Nominal impedance shall be
and one 1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver
8Ω. The multi-angled enclosure shall be of a void free multi-laminate
that is mounted on a constant directivity elliptic glass fibre horn that
birch ply construction with sealed internal bracing, 35mm pole mount
provides a nominal coverage angle of 80° (horizontal) by 50° (vertical).
and threaded M8 inserts for suspension. The screws shall be Stainless
The frequency response shall be 55 to 18000Hz in half space with less
Steel 316L with 200 hours coating per ASTM-B117. The finish shall be
than ± 3dB variation. Low and high frequency sections shall be integrated
a black matt multi layer HardTex water based painting with hardness
by an internal 2.6kHz passive crossover network with 400v polypropylene
higher than 75Hv. The front of the enclosure shall be protected by a black
capacitors, Air core inductors on HF, aluminium housed resistors and
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak
transparent grille. Dimensions shall be (HxWxD) 530 x 330 x 325 mm and
by EIA 426A standard (8 hours pink noise). Average wideband (200-
Weight 16kg. The loudspeaker system shall be the Fane Pro Audio ST-10.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-12
12” two-way passive touring speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
99 dB @ 1w/1m
125 dB continuous
128 dB
131 dB
Frequency Response (-6dB)
50 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 50°
Recommended Amplifier
≤ 600 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
ST-12
400 w RMS (EIA 426A standard)
600 w
1600 w
40Hz 24dB/oct Butterworth
60 to 140Hz 24dB/oct Linkwitz-Riley
Passive @ 1.9 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance Neo motor structure, 12” (300mm) diameter cast frame, 3” high
temperature voice coil on glass fibre former
High Frequency Driver
High Frequency driver, 1” (25mm) exit, 1.7” (44mm)
voice coil, Heat treated Titanium diaphragm
| 12” two-way passive touring speaker
APPLICATIONS
ST-12 loudspeaker is suitable for near field main PA reinforcement with or
without subwoofer, portable system or permanent installation, wall, stand,
or suspension, monitoring for vocals and instruments, side fill in small
stages, delay fill or under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm pot
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 400W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 50° low resonance glass fibre rotatable horn
• Void-free birch plywood cabinet, tongue and groove assembly
Finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
• Touring grade HardTex coating with black matt finish
• Complete line of flying hardware accessories
6x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 15
mm and 25 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
352 x 380 x 635 mm
TBC
21 kg net
23 kg gross
TBC
• DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-12
PRO AUDIO
12” two-way passive touring speaker |
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type consisting of
wideband (200-16000Hz) efficiency on axis shall be 99dB/1W/1m and
one 12” (300mm) direct radiating reflex loaded low frequency transducer
maximum SPL shall be 125dB continuous / 131dB peak. Nominal
and one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver
impedance shall be 8Ω. The multi-angled enclosure shall be of a void
that is mounted on a constant directivity elliptic glass fibre horn that
free multi-laminate birch ply construction with sealed internal bracing,
provides a nominal coverage angle of 80° (horizontal) by 50° (vertical).
35mm pole mount and threaded M8 inserts for suspension. The screws
The frequency response shall be 56 to 18500Hz in half space with less
shall be Stainless Steel 316L. The finish shall be a black matt multi layer
than ± 3dB variation. Low and high frequency sections shall be integrated
UltraTex water based painting with hardness higher than 75Hv. The front
by an internal 1.9kHz passive crossover network with 400v polypropylene
of the enclosure shall be protected by a black matt dual layer coated
capacitors, Air core inductors on HF, aluminium housed resistors and
(powder + acrylic) 1.5 mm thick steel acoustically transparent grille.
12dB/oct on LF/ 24dB/oct on HF slopes. Power handling shall be 400W
Dimensions shall be (HxWxD) 635 x 380 x 350 mm and Weight 21kg. The
RMS, 1600W peak by EIA 426A standard (8 hours pink noise). Average
loudspeaker system shall be the Fane Pro Audio ST-12.
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-12HP
12” high punch two-way passive touring speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
100 dB @ 1w/1m
126 dB continuous
129 dB
132 dB
Frequency Response (-6dB)
55 - 17000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
60° x 60°
Recommended Amplifier
≤ 800 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
ST-12HP
500 w RMS (EIA 426A standard)
1000 w
2000 w
43Hz 24dB/oct Butterworth
60 to 120Hz 24dB/oct Linkwitz-Riley
Passive @ 1.4 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 12” (300mm)
diameter cast frame Neo magnet, 3” high temperature voice coil on glass fibre former
High Frequency Driver
Fane CD314 Neo Compression Driver, 1.4”
(35.5mm) exit, 3.2” (81.2mm) voice coil, Heat
treated Titanium diaphragm
| 12” high punch two-way passive touring speaker
APPLICATIONS
ST-12HP loudspeaker is suitable for near field main PA reinforcement with
or without subwoofer, portable system or permanent installation, wall,
stand, or suspension, monitoring for vocals and instruments, side fill in
small stages, delay fill or under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm pot
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 500W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers with neo magnets
• Elliptic 70° x 50° low resonance glass fibre rotatable horn
• Void-free birch plywood cabinet, tongue and groove assembly
Finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
• Touring grade HardTex coating with black matt finish
• Complete line of flying hardware accessories
6x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 15
mm and 24 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
380 x 352 x 635 mm
TBC
23 kg net
25 kg gross
TBC
• DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-12HP
PRO AUDIO
12” high punch two-way passive touring speaker |
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type consisting of
100dB/1W/1m and maximum SPL shall be 127dB continuous / 132dB
one 12” (300mm) direct radiating reflex loaded low frequency transducer
peak. Nominal impedance shall be 8Ω. The multi-angled enclosure
and one 1.4” (35.5mm) exit / 3.2” (81.2mm) voice coil HF compression
shall be of a void free multi-laminate birch ply construction with sealed
driver that is mounted on a constant directivity elliptic glass fibre horn
internal bracing,35mm pole mount and threaded M8 inserts for wall
that provides a nominal coverage angle of 70° (horizontal) by 50°
and suspension. The screws shall be Stainless Steel 316L . The finish
(vertical). The frequency response shall be 56 to 17500Hz in half space
shall be a black matt multi layer UltraTex water based painting with
with less than ± 3dB variation. Low and high frequency sections shall be
hardness higher than 75Hv. The front of the enclosure shall be protected
integrated by an internal 1.4kHz passive crossover network with 400v
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
polypropylene capacitors, Air core inductors on HF, aluminium housed
acoustically transparent grille. Dimensions shall be (HxWxD) 635 x 380 x
resistors and 12dB/oct on LF / 24dB/oct on HF slopes. Power handling
352 mm and Weight 23kg. The loudspeaker system shall be the Fane Pro
shall be 500W RMS, 2000W peak by EIA 426A standard (8 hours pink
Audio ST-12HP.
noise). Average wideband (200-16000Hz) efficiency on axis shall be
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-15
15” two-way passive touring speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
99 dB @ 1w/1m
126 dB continuous
129 dB
130 dB
Frequency Response (-6dB)
48 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
80° x 50°
Recommended Amplifier
≤ 1200 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
ST-15
500 w RMS (EIA 426A standard)
1000 w
2000 w
40Hz 24dB/oct Butterworth
60 to 130Hz 24dB/oct Linkwitz-Riley
Passive @ 2 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 15” (380mm)
diameter cast frame / Neo magnet, 3” high temperature voice coil on glass fibre former
High Frequency Driver
High Frequency driver, 1” (25mm) exit, 1.7” (44mm)
voice coil, Heat treated Titanium diaphragm
| 15” two-way passive touring speaker
APPLICATIONS
ST-15 loudspeaker is suitable for near field main PA reinforcement with or
without subwoofer, portable system or permanent installation, wall, stand,
or suspension, monitoring for vocals and instruments, side fill in small
stages, delay fill or under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm Aluminium pot
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
Finish
• 500W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers
• Elliptic 80° x 50° low resonance glass fibre horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
• Complete line of flying hardware accessories
12x M8 points with internal metal brackets
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
Optional Accessories
CNC made with tongue and groove assembly, 18
mm / 24 mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
735 x 445 x 409 mm
TBC
28 kg net
31 kg gross
TBC
• DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-15
15” two-way passive touring speaker |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a passive, 2 way type consisting of one 15”
shall be 126dB continuous / 130dB peak. Nominal impedance shall be
(380mm) direct radiating reflex loaded low frequency transducer and
8Ω. The multi-angled enclosure shall be of a void free multi-laminate
one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver
birch ply construction with sealed internal bracing, 35mm pole mount
that is mounted on a constant directivity elliptic fiberglass horn that
and threaded M8 inserts for wall and suspension. The screws shall be
provides a nominal coverage angle of 80° (horizontal) by 50° (vertical).
Stainless Steel 316L with 200 hours coating per ASTM-B117. The finish
The frequency response shall be 48 to 18500Hz in half space with less
shall be a black matt multi layer HardTex water based painting with
than ±3dB variation. Low and high frequency sections shall be integrated
hardness higher than 75Hv. The front of the enclosure shall be protected
by an internal 2kHz passive crossover network with 400v polypropylene
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
capacitors, Air core inductors on HF, aluminium housed resistors and
acoustically transparent grille. Dimensions shall be (HxWxD) 735 x 445 x
24dB/oct slopes. Power handling shall be 500W RMS, 2000W peak
409 mm and Weight 28kg. The loudspeaker shall be the Fane Pro Audio
by EIA 426A standard (8 hours pink noise). Average wideband (200-
ST-15
16000Hz) efficiency on axis shall be 99dB/1W/1m and maximum SPL
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-15HP
15” high punch two-way passive touring speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
100 dB @ 1w/1m
129 dB continuous
132 dB
135 dB
Frequency Response (-6dB)
48 - 17000 Hz
Manufacturing Consistency
± 3 dB from 100 to 18,000 Hz
Nominal Directivity (-6dB)
70° x 50°
Recommended Amplifier
≤ 1200 w @ 8Ω
Recommended Low Cut
Full Range:
With Sub:
Crossover
Preset EQ’s
ST-15HP
800 w RMS (EIA 426A standard)
1600 w
3200 w
40Hz 18dB/oct Butterworth
60 to 130Hz 24dB/oct Linkwitz-Riley
Passive @ 1.4 kHz
TBC
Low Frequency Driver
Fane Transducer, 8Ω impedance, 15” (380mm)
diameter cast frame / Neo magnet, 4” high temperature voice coil on glass fibre former
High Frequency Driver
Fane CD314 Neo Compression Driver, 1.4”
(35.5mm) exit, 3.2” (81.2mm) voice coil, Heat
treated Titanium diaphragm
| 15” high punch two-way passive touring speaker
APPLICATIONS
ST-15HP loudspeaker is suitable for near field main PA reinforcement with
or without subwoofer, portable system or permanent installation, wall,
stand, or suspension, monitoring for vocals and instruments, side fill in
small stages, delay fill or under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm Aluminium pot
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
Finish
• 800W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane Drivers with neo magnets
• Elliptic 70° x 50° low resonance glass fibre rotatable horn
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
• Complete line of flying hardware accessories
12x M8 points with internal metal brackets
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
Optional Accessories
CNC made with tongue and groove assembly, 18
mm / 24 mm void-free birch plywood, exterior grade
Proprietary HardTex coating, black matt
735 x 445 x 409 mm
TBC
30.5 kg net
33.5 kg gross
TBC
• DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-15HP
15” high punch two-way passive touring speaker |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The loudspeaker shall be a passive, 2 way type consisting of one 15”
shall be 129dB continuous / 135dB peak. Nominal impedance shall be
(380mm) direct radiating reflex loaded low frequency transducer and one
8Ω. The multi-angled enclosure shall be of a void free multi-laminate
1.4” (35.5mm) exit / 3.2” (81.28mm) voice coil HF compression driver
birch ply construction with sealed internal bracing, 35mm pole mount
that is mounted on a constant directivity elliptic fiberglass horn that
and threaded M8 inserts for wall and suspension. The screws shall be
provides a nominal coverage angle of 70° (horizontal) by 50° (vertical).
Stainless Steel 316L with 200 hours coating per ASTM-B117. The finish
The frequency response shall be 48 to 17000Hz in half space with less
shall be a black matt multi layer HardTex water based painting with
than ± 3dB variation. Low and high frequency sections shall be integrated
hardness higher than 75Hv. The front of the enclosure shall be protected
by an internal 1.4kHz passive crossover network with 400v polypropylene
by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel
capacitors, Air core inductors on HF, aluminium housed resistors and
acoustically transparent grille. Dimensions shall be (HxWxD) 735 x 445 x
24dB/oct slopes. Power handling shall be 800W RMS, 3200W peak
409 mm and Weight 30.5kg. The loudspeaker shall be the Fane Pro Audio
by EIA 426A standard (8 hours pink noise). Average wideband (200-
ST-15HP.
16000Hz) efficiency on axis shall be 100dB/1W/1m and maximum SPL
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-118S
18” passive touring subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
98 dB @ 1w/1m
128 dB continuous
131 dB
134 dB
Frequency Response (-6dB)
34 - 1200 Hz
Manufacturing Consistency
± 3 dB from 30 to 300 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 1600 w @ 8Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
ST-118S
1200 w RMS (EIA 426A standard)
2400 w
4800 w
LPF 70 - 125 Hz 24dB/Oct BW/LR
No, active usage only with external electronic
crossover, Fane recommended DSP
TBC
Fane Transducer, 8Ω impedance with 60mm peakpeak excursion, 18” (460mm) diameter, 4” high
temperature voice coil on glass fibre former
| 18” passive touring subwoofer
APPLICATIONS
ST-118S subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in medium sized venues to
stages, indoor or outdoor live performances, arenas, night clubs, houses
of worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm Aluminium pot with M20 screw fitting
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 28 Hz usable frequency
• 1200W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
• Void-free birch plywood cabinet, tongue and groove assembly
Finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
• Touring grade HardTex coating with black matt finish
• Complete line of hardware accessories
8x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
665 x 590 x 689 mm
TBC
60 kg net
65 kg gross
TBC
• DSP preset support on associated electronics
• Quick release caster plates with 2x swivel castor 4” wheel 2x swivel
castor with locking 4” wheels
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-118S
PRO AUDIO
18” passive touring subwoofer |
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of one 18” (460mm) direct
Steel 316L with 200 hours coating per ASTM-B117. The finish shall be
radiating reflex loaded low frequency transducer with high excursion
a black matt multi layer HardTex water based painting with hardness
ability. The frequency response shall be 35 to 1200Hz in half space with
higher than 75Hv. The front of the enclosure shall be protected by a black
less than ± 3dB variation. Power handling shall be 1200W RMS, 4800W
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
peak by EIA 426A standard (8 hours pink noise). Average wideband
transparent grille. Dimensions shall be (HxWxD) 665 x 590 x 689 mm and
(40-150Hz) efficiency on axis shall be 98dB/1W/1m and maximum SPL
Weight 60kg.The enclosure shall be fitted with quick release castor plates
shall be 128dB continuous / 134dB peak. Nominal impedance shall be
with 2 x swivel castors 2 x swivel castors with break, castors will have
8Ω. The stackable enclosure shall be of a void free multi-laminate birch
100mm wheels. The loudspeaker shall be the Fane Pro Audio ST-118S.
ply construction with sealed internal bracing, metal 35mm pole mount
and threaded M20 inserts for suspension. The screws shall be Stainless
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-118XS
18” high excursion neodymium passive touring subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
8Ω
98 dB @ 1w/1m
129 dB continuous
132 dB
135 dB
Frequency Response (-6dB)
32 - 1200 Hz
Manufacturing Consistency
± 3 dB from 30 to 300 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 1600 w @ 8Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
ST-118XS
1200 w RMS (EIA 426A standard)
2400 w
4800 w
LPF 70 - 125 Hz 24dB/Oct BW/LR
No, active usage only with external electronic
crossover, Fane recommended DSP
TBC
Fane Transducer, 8Ω impedance with 60mm peakpeak excursion, Neo motor structure, 18” (460mm)
diameter, 5” high temperature voice coil on glass
fibre former
| 18” high excursion neodymium passive touring subwoofer
APPLICATIONS
ST-118XS subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in medium sized venues to
stages, indoor or outdoor live performances, arenas, night clubs, houses
of worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm Aluminium pot with M20 screw fitting
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 25Hz usable frequency
• 1200W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver with Neo
magnet structure
Finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
8x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
665 x 590 x 689 mm
TBC
54 kg net
61 kg gross
TBC
• Complete line of hardware accessories
• DSP preset support on associated electronics
• Quick release caster plates with 2x swivel castor 4” wheel 2x swivel
castor with locking 4” wheels
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-118XS
PRO AUDIO
18” high excursion neodymium passive touring subwoofer |
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of one 18” (460mm) direct
Steel 316L with 200 hours coating per ASTM-B117. The finish shall be
radiating reflex loaded low frequency transducer with high excursion
a black matt multi layer HardTex water based painting with hardness
ability. The frequency response shall be 35 to 1200Hz in half space with
higher than 75Hv. The front of the enclosure shall be protected by a black
less than ± 3dB variation. Power handling shall be 1200W RMS, 4800W
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
peak by EIA 426A standard (8 hours pink noise). Average wideband
transparent grille. Dimensions shall be (HxWxD) 665 x 590 x 689 mm and
(40-150Hz) efficiency on axis shall be 98dB/1W/1m and maximum SPL
Weight 54kg.The enclosure shall be fitted with quick release castor plates
shall be 129dB continuous / 135dB peak. Nominal impedance shall be
with 2 x swivel castors 2 x swivel castors with break, castors will have
8Ω. The stackable enclosure shall be of a void free multi-laminate birch
100mm wheels. The loudspeaker shall be the Fane Pro Audio ST-118XS.
ply construction with sealed internal bracing, metal 35mm pole mount
and threaded M20 inserts for suspension. The screws shall be Stainless
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-218S
2x 18” passive touring subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
4Ω
101 dB @ 1w/1m
134 dB continuous
137 dB
140 dB
Frequency Response (-6dB)
30 - 1200 Hz
Manufacturing Consistency
± 3 dB from 30 to 300 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 3000 w @ 4Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
ST-218S
2400 w RMS (EIA 426A standard)
4800 w
9600 w
LPF 70 - 125 Hz 24dB/Oct BW/LR
No, active usage only with external electronic
crossover, Fane recommended DSP
TBC
Fane Transducer, 8Ω impedance with 60mm peakpeak excursion, 18” (460mm) diameter, 4” high
temperature voice coil on glass fibre former
| 2x 18” passive touring subwoofer
APPLICATIONS
ST-218S subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in medium sized venues to
stages, indoor or outdoor live performances, arenas, night clubs, houses
of worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm Aluminium pot with M20 screw fitting
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 27Hz usable frequency
• 2400W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver
• Void-free birch plywood cabinet, tongue and groove assembly
Finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
• Touring grade HardTex coating with black matt finish
• Complete line of hardware accessories
8x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
1236 x 590 x 689 mm
TBC
99 kg net
108 kg gross
TBC
• DSP preset support on associated electronics
• Quick release caster plates with 2x swivel castor 4” wheel 2x swivel
castor with locking 4” wheels
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-218S
2x 18” passive touring subwoofer |
PRO AUDIO
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of two 18” (460mm) direct
Steel 316L with 200 hours coating per ASTM-B117. The finish shall be
radiating reflex loaded low frequency transducer with high excursion
a black matt multi layer HardTex water based painting with hardness
ability. The frequency response shall be 35 to 1200Hz in half space with
higher than 75Hv. The front of the enclosure shall be protected by a black
less than ± 3dB variation. Power handling shall be 1200W RMS, 9600W
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
peak by EIA 426A standard (8 hours pink noise). Average wideband
transparent grille. Dimensions shall be (HxWxD) 1236 x 590 x 689 mmm
(40-150Hz) efficiency on axis shall be 101dB/1W/1m and maximum SPL
and Weight 99kg.The enclosure shall be fitted with quick release castor
shall be 134dB continuous / 140dB peak. Nominal impedance shall be
plates with 2 x swivel castors 2 x swivel castors with break, castors will
4Ω. The stackable enclosure shall be of a void free multi-laminate birch
have 100mm wheels. The loudspeaker shall be the Fane Pro Audio ST-
ply construction with sealed internal bracing, metal 35mm pole mount
218S.
and threaded M20 inserts for suspension. The screws shall be Stainless
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-218XS
2x 18” high excursion neodymium passive touring subwoofer |
PRO AUDIO
ACOUSTIC SPECIFICATIONS
Power Handling
Program
Peak
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
Program
Peak
4Ω
102 dB @ 1w/1m
135 dB continuous
138 dB
141 dB
Frequency Response (-6dB)
30 - 1200 Hz
Manufacturing Consistency
± 3 dB from 30 to 300 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 3000 w @ 4Ω
Recommended Crossover
Crossover
Preset EQ’s
Low Frequency Driver
ST-218XS
2400 w RMS (EIA 426A standard)
4800 w
9600 w
LPF 70 - 125 Hz 24dB/Oct BW/LR
No, active usage only with external electronic
crossover, Fane recommended DSP
TBC
Fane Transducer, 8Ω impedance with 60mm peakpeak excursion, Neo motor structure, 18” (460mm)
diameter, 5” high temperature voice coil on glass
fibre former
| 2x 18” high excursion neodymium passive touring subwoofer
APPLICATIONS
ST-218XS subwoofer is suitable for bass reinforcement for main PA
systems, touring or permanent installations in medium sized venues to
stages, indoor or outdoor live performances, arenas, night clubs, houses
of worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS
Flying Hardware
Pole Mount
35mm Aluminium pot with M20 screw fitting
Connectors
2pcs NEUTRIK Speakon NL4
Cabinet
FEATURES
• 25Hz usable frequency
• 2400W RMS power handling (EIA 8 hours Standard)
• Equipped with premium Fane long excursion Driver with Neo
magnet structure
Finish
Cabinet Size (HxWxD)
Shipping Carton Size (HxWxD)
Weight
• Void-free birch plywood cabinet, tongue and groove assembly
• Touring grade HardTex coating with black matt finish
8x M8 points with internal metal brackets
Optional Accessories
CNC made with tongue and groove assembly, 18
mm and 24 mm void-free birch plywood, exterior
grade
Proprietary HardTex coating, black matt
1236 x 590 x 689 mm
TBC
91 kg net
101 kg gross
TBC
• Complete line of hardware accessories
• DSP preset support on associated electronics
• Quick release caster plates with 2x swivel castor 4” wheel 2x swivel
castor with locking 4” wheels
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
ST-218XS
PRO AUDIO
2x 18” high excursion neodymium passive touring subwoofer |
ARCHITECTURAL SPECIFICATIONS
The subwoofer shall be passive, consisting of two 18” (460mm) direct
Steel 316L with 200 hours coating per ASTM-B117. The finish shall be
radiating reflex loaded low frequency transducer with high excursion
a black matt multi layer HardTex water based painting with hardness
ability. The frequency response shall be 35 to 1200Hz in half space with
higher than 75Hv. The front of the enclosure shall be protected by a black
less than ± 3dB variation. Power handling shall be 2400W RMS, 9600W
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
peak by EIA 426A standard (8 hours pink noise). Average wideband
transparent grille. Dimensions shall be (HxWxD) 1236 x 590 x 689 mm
(40-150Hz) efficiency on axis shall be 102dB/1W/1m and maximum SPL
and Weight 91kg.The enclosure shall be fitted with quick release castor
shall be 135dB continuous / 141dB peak. Nominal impedance shall be
plates with 2 x swivel castors 2 x swivel castors with break, castors will
4Ω. The stackable enclosure shall be of a void free multi-laminate birch
have 100mm wheels. The loudspeaker shall be the Fane Pro Audio ST-
ply construction with sealed internal bracing, metal 35mm pole mount
218XS.
and threaded M20 inserts for suspension. The screws shall be Stainless
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
PRO AUDIO
FANE PRO AUDIO
Sovereign House
Gilcar Way
Wakefield Europort
Castleford
WF10 5QS
United Kingdom
Tel:
Fax:
+44 (0)1924 224618
+44 (0)1924 899166
Email: info@faneproaudio.com
WWW.FANEPROAUDIO.COM
© 2013, Fane International Ltd. We operate a policy of continuous product development and reserve the right to change specification at any time without notice.
Any specifications or product images in this document are correct at the time of publication.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising