HM8115-2 - Caltest Instruments Ltd

HM8115-2
8kW Power Meter
HM8115-2
HZ815 Power Adapter
RMS Value
Active Power
R
R
R
R
R
R
R
R
R
R
R
Wide Measurement Range 1 mW…8 kW
Voltage Range 100 mV…500 V, Current Range 1 mA…16 A
Frequency Range DC…1 kHz
Simultaneous Display of Voltage, Current and Power
Display of apparent, active and reactive Power
Power Factor Display
Autoranging for simple Operation
Monitor Output (BNC) representing the instantaneous Power
Suitable for Measurements on Frequency Converters
Software for Remote Control and Data Acquisition included
Galvanically isolated USB/RS-232 Dual-Interface, optional IEEE-488 (GPIB)
8 kW Power Meter HM8115-2
All data valid at 23 °C after 30 minutes warm-up.
Voltage
Ranges:
Resolution:
Accuracy:
Input impedance:
Crest factor:
Input protection:
Current
Ranges:
Resolution:
Accuracy:
Crest factor:
Input protection:
True RMS voltage measurement (AC + DC)
50 V
150 V
500 V
0.1 V
1 V
1 V
20 Hz…1 kHz:
±(0.4 % + 5 digit)
DC:
±(0.6 % + 5 digit)
1 MΩ II 100 pF
max. 3.5 at full scale
max. 500 Vp
True RMS current measurement (AC + DC)
160 mA
1.6 A
16 A
1 mA
1 mA
10 mA
20 Hz…1 kHz:
±(0.4 % + 5 digit)
DC:
±(0.6 % + 5 digit)
max. 4 at full scale
fuse, FF 16A 6.3 x 32mm (superfast)
Active power measurement
The measurement range is the product of the selected voltage respective
current ranges.
Ranges:
8 W
24 W
80 W 240 W 800 W 2,400 W 8,000 W
Resolution:
1 mW 10 mW 10 mW 100 mW 100 mW
1 W
1 W
20 Hz…1 kHz:
±(0.8 % + 10 digit)
Accuracy:
DC:
±(0.8 % + 10 digit)
4-digit, 7-segment LED
Display:
Reactive power measurement
Ranges:
8 var
24 var
80 var 240/800 var 2,400/8,000 var
Resolution: 10 mvar 100 mvar 100 mvar
1 var
1 var
20…400 Hz: ±(2.5 % + 10 digit + 0.02 x P)
Accuracy:
P = active power
4-digit, 7-segment LED
Display:
Apparent power measurement
Ranges:
8 VA
24 VA
80 VA 240/800 VA 2,400/8,000 VA
Resolution: 1 mVA 10 mVA
10 mVA
100 mVA
1 VA
20 Hz…1 kHz:
±(0.8 % + 5 digit)
Accuracy:
4-digit, 7-segment LED
Display:
Functions and displays
Measurement functions:
Range selection:
Overrange alarm:
Display resolution:
Voltage
Current
Power
Power factor
Interface
Interface:
voltage, current, power, power factor
automatic/manual
visual and acoustic
3-digit, 7-segment LED
4-digit, 7-segment LED
4-digit, 7-segment LED
3-digit, 7-segment LED
Protocol:
Data rate:
Functions:
Dual-Interface USB/RS-232 (HO820),
IEEE-488 (GPIB) (optional)
D-sub connector (galvanic isolation to test
circuit and monitor output)
Xon/Xoff
9,600 Baud
control / data fetch
Miscellaneous
Safety Class:
Power supply:
Power consumption:
Operating temperature:
Storage temperature:
Rel. humidity:
Dimensions (W x H x D):
Weight:
Safety Class I (EN 61010-1)
115/230 V ±10 %, 50…60 Hz, CAT II
approx. 15 W at 50 Hz
+5…+40 °C
-20…+70 °C
5…80 % (non condensing)
285 x 75 x 365 mm
approx. 4 kg
Connection RS-232:
Accessories supplied: Line cord, Operating manual, CD, Software
Recommended accessories:
HO880 Interface IEEE-488 (GPIB), galvanically isolated
HZ10S 5 x silicone test lead (measurement connection in black)
HZ10R 5 x silicone test lead (measurement connection in red)
HZ10B 5 x silicone test lead (measurement connection in blue)
HZ13
Interface cable (USB) 1.8 m
HZ14
Interface cable (serial) 1:1
HZ33
Test cable 50 Ω, BNC/BNC, 0.5 m
HZ34
Test cable 50 Ω, BNC/BNC, 1.0 m
HZ42
19" Rackmount kit 2RU
HZ72
GPIB-Cable 2 m
HZ815 Socket adapter
Power factor measurement
0.00…+1.00
Display:
50…60 Hz: ±(2 % + 3 digit) (sine wave)
Accuracy:
voltage and current >1/10 of full scale
Monitor output (analog)
BNC connector (galvanic isolation
Connection:
to test circuit and RS-232 interface)
protective earth
Reference potential:
1 Vac at full scale (2,400/8,000 digit)
Level:
typ. 5 %
Accuracy:
approx. 10 kΩ
Output impedance:
DC…1 kHz
Bandwidth:
±30 V
Protected up to:
HM8115-2E/160812 · C&E · Subject to change without notice · © HAMEG Instruments GmbH® · DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 8000 · Fax +49 (0) 6182 800100 · www.hameg.com · [email protected]
Available from
Power sources and test
instrumentation solutions
Caltest have been providing power sources and
test instrumentation solutions for over 20 years
and are proud to represent a number of industry
leading manufacturers.
As well as supplying world class power sources
and test instrumentation Caltest also has a
service centre and UKAS calibration laboratory.
NEED HELP?
CALL US:
01483 302 700
or visit our website for
more details
VISIT OUR WEBSITE CONTACT US Caltest Instruments Ltd
4 Riverside Business Centre
Walnut Tree Close
Guildford
Surrey GU1 4UG
United Kingdom
Tel: +44 (0) 1483 302 700
[email protected]
Fax: +44 (0) 1483 300 562
www.caltest.co.uk
Sales • Rentals • Service • UKAS Calibration

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project