advertisement
▼
Scroll to page 2
of 15
DVD / MP3 / CD PLAYER DVD-202 OPERATION MANUAL mp3 PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner. RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. DANGER LASER SAFETY This unit employs an optical laser beam system in the CD mechanism, designed with built -in safeguards. Do not attempt to disassemble, refer to qualified service personnel. Exposure to this invisible laser light beam may be harmful to the human eye. INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO LASER BEAM. THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. 2 Getting Started Before attempting to connect, operate or adjust this product, please read these instruction completely and keep this manual for future reference. Dear customers : May we take this opportunity to thank you for purchasing this DVD Player. We strongly recommend that you carefully study the operating instructions before operating the unit. Main Features • Front loading DVD / MP3 / CD player. • Built-in Dolby Digital. Standards Video : NTSC or PAL Audio : PCM (48 or 96 kHz), MPEG layer 2, Dolby AC-3 & dts line out Features of audio specifications – DTS for Digital (Coaxial & Optical) output only – Linear PCM output 3 Getting Started Disc types Audio & Video MP3 Disc size 12cm single side, single layer / single side, double layer PAL and NTSC DVD disc Playback time 135min / 240min max. Audio Disc size 12cm / 8cm CD disc Playback time 74min/20min max. Audio MP3 format disc * Player is CD-R, CD-RW compatible. Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated. Region Management Information This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD player cannot play that disc. This Region number of this DVD player is . Disc maintenance – Before playback, wipe the disc from the center hole toward the outer edge with a clean cloth. – Never use bezine, thinner, cleaning fluid, static electricity prevention liquids or any other solvent. Note : Dirty disc may cause bad picture. Correct Incorrect From the center to the edge 4 Safety precautions Warning Attention To avoid electrical shock, do not open the cabinet, refer servicing to qualified personnel only. If smoke, malodor or unrelated noise are emitted from the unit, turn off the power and disconnect the AC power cord. Warning Attention Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilt into the unit, serious damage could occur. Touching the unit is dangerous especially if during thunder. Warning Attention Do not expose this equipment to rain or moisture. When left unused for a long period of time, the unit should be unplugged from the household AC outlet. Warning Attention Do not block ventilation holes of the unit so that air can circulate freely, Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap and water solution and wrung out thoroughly, and then wipe again with a dry cloth. Note: This unit is a class 1 laser product and uses a visible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate it correctly as instructed. 5 Front Panel Control 1 1. 2. 3. 4. 5. 2 3 4 5 6 7. 8. 9. 10. Power On/Off Standby Indicator Display Disc Tray Open/Close Button 6 7 8 9 10 Remote Sensor Button Skip Backward Button Skip Forward Button Stop Button Play/Pause Button Rear Panel Control 1 2 1. 2. 3. 4. 3 4 6 5 7 5. 6 7. Digital Audio Output (Coaxial) Digital Audio Ouput (Optical) Analog Audio Output Video Output (Composite) S-Video Output Component Video Output (Scart) AC Power Cord Display 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. DVD Indicator Dts Indicator Dolby Digital Indicator Multi-angle view Indicator MP3 Indicator Disc loading Indicator PLAY Indicator REPEAT Indicator PAUSE Indicator Track (CD) / Chapter (DVD) number Play Time Display 6 1 2 6 7 8 3 9 10 4 11 5 Getting Started Battery installation (remote control unit) 1. 2. 3. – Remove the battery cover. Insert two batteries (AAA) making sure the polarity (+/-) matches the marks inside the unit. Replace the cover. Do not attempt to recharge, short-circuit, disabssemble, heat or throw the batteries into the fire. + — – Do not mix old and new batteries Note : Weak batteries can leak and severely damage the remote control unit. + 15 1 1. 2. 3. 4. 5. 6. 7. 8. MUTE 16 2 1 2 3 4 5 6 7 8 17 9 0 +10 ZOOM 18 PAL-MUL-NT AL-MUL-NT SETUP DISPLAY DISPLA 3 4 19 ANGLE AUDIO UDIO 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. PBC 5 20 DVD VD MENU VOL+ OL+ SUBTITLE VOLOL- 6 21 7 22 8 23 PREVIOUS NEXT 24 9 10 PLAY PLA 25 /STEP 26 11 REPEAT REPEA PROGRAM PR OGRAM 27 12 RETURN SEARCH SLOW SLO A-B 28 29 CANCEL 13 30 14 31 7 Power on/off Numeric Buttons PAL/MULTI/NTSC Button Audio Button Angle Button DVD Menu Button Subtitle Button Direction Buttons ( Up / Down/ Left/ Right) Previous Button Step/Pause Button Play Button Stop Button Search Button Slow Button Mute Button Eject Button Zoom Button Set Up Button Display Button PBC Button Volume + Button Volume - Button Enter Button Next Button Fast Backward Button Fast Forward Button Program Button Repeat Button Return Button Cancel Button Repeat A-B Button — Remote Control Unit Connect To TV Caution : Turn off all the equipment before any installation. This unit provides several types of video and audio signals output. They are : • SCART Output • RCA output • S-Video Output User can choose a suitable connection type to connect the player to TV. 1. SCART Version SCART (RGB) 2. Connection via Composite (RCA) Cable In this type of connection, we have to connect the Left/Right Audio Cables (Red and White) and a Video signal (Yellow). Video in Audio in L Audio in R Note : Go to part 4. 3. Connection via S-Video Cable S-Video in Audio in L Audio in R 8 4. Configure the TV System The DVD Player supports PAL, NTSC and Multi-system TV type. In case there is no picture output on the screen, please switch your player TV mode in the Setup menu for proper TV System configuration. 1. Presss SETUP on the remote control. 2. Choose SCREEN SETUP and press ENTER. 3. Choose TV SYSTEM. 4. Select the correct TV mode. Connection to Amplifer There are four different types of connection between the DVD player and an amplifier. • • • Digital output via Optical Fiber (Connection 1). Digital output via Coaxial Cable (Connection 2). 2 Channels (Left/Right) Audio Output (Connection 3 - 4) NOTE: 1. The Digital/Optical output cut off, when Analog output was selected. 2. The Analog output cut off, when Digital/Optical output was selected. 9 Operation TV Selection Turn on the TV, the DVD player and the Audio Amplifer System (if any). 1. Press the “TV/VIDEO” button on the TV. 2. Selet the Video Mode (TV). Note: If there are more than 1 AV channel for the TV, select the channel you have connected to the DVD player. 3. Select the Correct Audio Input on the AV Amplifier (if any) Setup Mode • Setup Mode provides the menu for the configuration of LANGUAGE mode, SCREEN mode, AUDIO mode . • Item selection in the Setup Menu is done by using the Navigation Arrows and the ENTER key. • To exit the Setup Menu, choose the EXIT option in the Setup Menu and press ENTER. SET UP MENU LANGUAGE SET UP SCREEN SET UP AUDIO SET UP CUSTOM SET UP EXIT LANGUAGE SET UP OSD There are 7 OSD languages embedded in the DVD Player : English, French, German, Italian, Spanish,Denish and Swedish. • Press the SETUP button on the remote controller to enter the setup menu main page. Play Discs 1. Press the OPEN/CLOSE button ( ) on the front panel and load the Disc on the tray. the label side should be facing upwars. For a Double-sided DVD Disc, put the disc with label A/1 up. 2. Press the OPEN/CLOSE button ( ) again to close the tray and the disc will be loaded. 3. The Disc will be loaded automatically. • If it is a DVD disc, it will show the Menu / Title Page on the screen where you can access to the Casting Information, Product History, Movie Introduction etc. • Select the desired items from the Menu screen using the Navigation Arrows ( ) and pressing ENTER button on the remote control. Note: Play button on the front panel cannot be used for selection of DVD on screen menu. • For CD, it will play the first track directly. 4. Press the STOP button ( ) if you want to stop the Disc playback. You can resume playback by pressing the PLAY button and it will start at the location where you have pressed stopped (Resume Play). 5. Press the STOP button twice to have the Disc really stopped. 10 Pause Mode This function is applicable for DVD and CD audio. 1. Press the PAUSE button ( ) will cause the player to enter Pause mode. 2. Press the PLAY button or PAUSE button again will resume to Play State. DVD Menu Play The DVD Menu Play function is only applicable for DVD movie. User can access the Casting informationm, Production History, Movie Introduction etc. directly through this function. 1. Press the DVD MENU button on the remote control to enter the Root Menu. 2. Use the Navigation Arrows () or input the item index through the Number keys (09) to do the selection. 3. Press ENTER to confirm the selection. Audio This funciton is applicable for DVD with different effects. - For a DVD disc, pressing the AUDIO button will change the language of playback, - OSD will display audio 1/2: 5.1 CH ENGLISH etc. Mute Mute key is used to remove all the audio effect on the speakers. Once the MUTE key is pressed, the playback will continue with no sound effect. Fast Play This function is applicable for DVD, and CD audio but with different effects. The FAST FORWARD (FF) key and FAST BACKWARD (FR) key are used to achieve fast play function. Note : Press PLAY button at any stage will resume to normal speed. Slow Play The Slow Forward is applicable for DVD while the Slow Backward can only be performed in DVD. Note: Press PLAY button to switch back to normal playback speed. Repeat Mode Repeat This function is applicable for DVD and CD audio but with different effects. - For DVD disc playback, user can choose to repeat the current chapter, current title and disc. Subsequent key press of the REPEAT key can change between these three options. - For CD, user can choose to repeat the current track or the whole disc (Repeat All). Subsequent key press of the REPEAT key can change between these two options. 11 Repeat AB This function is applicable for DVD and CD audio. User can specify the repeating interval by marking the starting point and the end point. 1. Press the REPEAT AB button to mark the starting point (Playback will continue). 2. Press the REPEAT AB button to mark the end point (The marked part will be repeated automatically.) Note : Press the REPEAT AB button during repetition will disable the Repeat mode. Subtitle This function is only applicable for DVD disc. It can change the subtitle language shown on the screen. Note : Number of subtitle available depends on the DVD disc. Angle Some discs may have multiple viewing angles during production. The ANGLE button is to select the viewing angle shown on the screen. Note : The number of Angle of View depends on the disc. Search This function is applicable for DVD and CD audio. Through this function, the user can access a specific location or a specific track by key in the target time or the track number. Resume Play This function is applicable for DVD and CD audio. During the disc playback, when the STOP button is pressed once, the player will enter the Resume Play mode. At this time, if the PLAY button is pressed, the player will resume playback at the location where the STOP button is pressed. If the STOP button is pressed (i.e. STOP button is pressed twice), the player will be stop. Zoom This function is applicable for DVD. User can enlarge a static picture or a moving picture by pressing the ZOOM key. There are 2 levels of zooming (2x and 4x) and they can be achieved one by one through subsequent key presses on the ZOOM key. Besides, user can select the portion of the picture to be enlarged by using the Navigation keys (). Program Mode this function is applicable for DVD and CD audio. User can assign the playback sequence according to his/her preference. For CD audio, user can assign the track sequence while for DVD disc, user can assign both the Title and Chapter sequence. - CD 1. Press the PROGRAM key. The Program Sequence tabel will be shown on the screen. 2. Enter the track number according to the user preference through the Number keys (0-9). 12 3. Assigning the playback sequence, press ENTER on the remote control to confirm. To remove the program: 1. Press the PROGRAM key to invoke the Program Mode. 2. Move the highlight cursor to the STOP option by using the Navigation Arrows. 3. Press ENTER to confirm. - DVD 1. Press the PROGRAM key. The Program Sequence tabel will be shown on the screen. 2. Enter the Title number with the Number keys (0-9) on the remote control. 3. Enter the Chapter number of the Title selected in the last step. 4. Repeat step 2 - 3 to input the sequence. 5. Press ENTER on the remote control to confirm. Note : The Program can be removed in the same ways as CD audio. MP3 OPERATION This unit can support ISO9660 file system CD-ROM navigation. Multi-Media files such as MP3 thus can be played in the player. Operation • Insert the MP3 disc into the tray. Navigation Menu will be displayed. The menu will show the files in the root directory, and the MP3 files then be play automatically. Note : • Operation such as “STOP”, “NEXT” and “PREVIOUS” are similar to that of CD Audio disc playback. 13 TROUBLE SHOOTING Check the following guide for the possible cause of a problem before contacting service. Symptom No Power Correction Cause • The power cord is disconnected. • Plug the power cord into the wall outlet and unit securely. • Insert a disc. (Check that the DVD or auThe power is on, but DVD • No disc is inserted. dio CD indicator in the DVD display is lit.) player does not work • The TV is not set to receive DVD • Select the appropriate video input mode No Picture on the TV so the picture from the DVD signal output. player appears on the TV screen. • The video cable is not connected • Connect the video cable into the jacks securely. securely. • The connected TV power is turned off. • Turn on the TV. • The equipment connected with the • Select the correct input mode of the No Sound audio receiver so you can listen to the audio cable is not set to receive sound from the DVD player. DVD signal output. • The audio cable is not connected • Connect the audio cable into the jacks securely. securely. • The power of the equipment connected • Turn on the equipment connected with the audio cable. with the audio cable is turned off. • The Digital Audio Output is set to • Set the Digital audio Output to the correct position, then turn on the DVD player the wrong position. again by pressing the POWER button. • Clean the disc. The playback picture is poor • The disc is dirty. • Insert a disc The DVD player does • No disc is inserted. • Insert a playable disc. (Check the disc • An unplayable disc is inserted. not start playback type, color system and Regional code.) • The disc is placed upside down. • Place the disc with the playback side down. • The disc is not placed with the • Place the disc on the disc tray correctly inside the guide. guide. • Clean the disc. • The disc is dirty. • Press the SET UP button to turn off • A menu is on the TV screen. the menu screen. • Cancel the Rating function or change • The Rating level is set. the rating level. The Remote Control • The remote control is not pointed at • Point the remote control at the remote does not work properly sensor of the DVD player. the remote sensor of the DVD player. • The remote control is too far from • Operate the remote control within about 23ft (7m). the DVD player. • There is an obstacle in the path of the • Remove the obstacle. remote control and the DVD player. • The batteries in the remote con- • Replace the batteries with new ones. trol are exhausted. 14 SPECIFICATION GENERAL Power source AC 230V 50Hz Power consumption Mass 10W 2.5 Kg External dimensions (WxHxD) Operating conditions 430 X 48 x 253 mm Temperature: 5°C to 35°C Operation status Operating humidity Horizontal 5% to 90% CD/DVD Laser Semiconductor laser, wavelength 650nm Signal system Frequency response (audio) PAL 625/50, NTSC 525/60 4Hz to 20 KHz Signal to noise ratio (audio) Dynamic range (audio) More than 90dB (1KHz, NOP, 20KHz LPF/A-Filter) More than 95dB Harmonic distortion (audio) 0.2% (1KHz) VIDEO Video output S-Video output 1.0V (p-p), 75 ohm, negative sync., RCA jack (Y) 1.0V (p-p), negative sync., Mini DIN 4-pin x 1 (C) 0.3V (p-p), 75 ohm * The default secret code is 9922. * Design and specification are subjuect to change without notice. 15
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project