Scopus UE-9000 Encoder Platform, UE-9217, UE-9318 DSNG module User Manual

Below you will find brief information for Encoder Platform UE-9000, DSNG module UE-9217, DSNG module UE-9318. This document details how to configure the UE-9000 Encoder Platform for various modulation and upconverter settings for the L-band or IF modulator. Learn how to set up the modulator parameters for the L-band and IF modulators, as well as general modulation parameters that apply to both types of modulators.

PDF Download
Document
UE-9000 Encoder Platform User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • L-Band and IF modulator configuration
  • Modulation scheme selection
  • FEC and modulation settings
  • Transport stream configuration
  • Video and audio channel settings
  • IP output interface control
  • Unit information and settings
  • Scrambling modes (BISS-1, BISS-E)
  • Cascading for multi-encoder setups
  • SI table management

Frequently asked questions

The UE-9000 supports both L-Band and IF modulators. This manual details the configuration for both types.

The Modulation and Up-Converter menu allows you to set modulation parameters, such as symbol rate, modulation scheme, and FEC, as well as modulator parameters specific to either the L-Band or IF modulator.

Yes, you can choose between DVB and ATSC broadcast standards. Refer to the 'Broadcast Standard' parameter in the Transport Stream menu for details.
Preparing document for printing…
0%