cylinder head / engine block

Innovation is

our mission!

GD_KP_$KT-K14-$KP-AUTO-ZYLINDERKOPF_#SALL_#APR_#V1.indb 206 27.03.2015 10:17:38

GD_KP_$KT-K14-$KP-AUTO-ZYLINDERKOPF_#SALL_#APR_#V1.indb 207

PAGE

TOOLS FOR ENGINE BLOCK SCREWS 208 - 209

TOOLS FOR CYLINDER BLOCK SCREWS 209 - 212

VIBRATION DAMPER TOOLS 213

SERVICE STANDS AND PARTS STATIONS

SLIDE RAIL BOLTS EXTRACTION TOOLS

213

213

GUIDE SLEEVES INTERNAL EXTRACTOR 213

EXTRACTION TOOL AND SPIRAL PROFILE SOCKETS 213 - 216

NUT SPLITTER 216 - 217

THREAD BORING TOOL AND BORE JIGS 217

CRANK SHAFT FACING TOOLS

VALVE GAUGES

VALVE PNEUMATIC ADAPTER

218

218

218

VALVE RETAINER AND VALVE SPRING TENSIONER 218 - 220

VALVE SHALT SEALING TOOLS 220 - 221

GASKET SCRAPER 221 - 222

SEALING RING TOOLS 222 - 223

VALVE SEAT CUTTER

VALVE CUTTER

224

224

VALVE WEDGE ASSEMBLY 224

VALVE ADJUSTMENT TOOLS 224 - 225

PISTON RING TOOLS

CYLINDER LINER TOOLS

225

225

CYLINDER HON DEVICES 226

TEST AND MEASURING TOOLS 226 - 228

27.03.2015 10:17:38

i i

TOOLS FOR ENGINE BLOCK SCREWS

VAG Engine support socket set, extra short

• 12-point

• For the assembly and removal of the aluminium engine support (hard to reach sites)

• Ideal for timing belt change

• Internal square drive to DIN 3120 / ISO 1174 with ball reception

• Extra-short design

• For manual operation

• Matt finish

• Chrome vanadium

Application range: For timing belt change on Volkswagen

Golf IV, Audi, Škoda, Seat etc.

Bit socket for five star tamperproof screws

• Five star bit, tamperproof



• Matt finish

• Chrome vanadium

Application range: Control devices, alternator, air quantity meter, exterior mirror, insertion pumps for pump-line-nozzle system, door lock fastening screw for Volkswagen, Audi, Ford,

Mercedes, Rover, Seat, Škoda, Volvo etc.

CLASSIC Bit set for tamperproof five star screws


• With external hexagon drive to DIN 3126 / ISO 1173 - C 6.3

• Can be used by hand or with an electric screwdriver

• Ideally suited for fittings in trade and industry

• Nickel plated

• Special steel



consists of:

911.1293 12-point socket, 16.0 mm, L=30 mm

911.1294 12-point socket, 16.0 mm, L=47.5 mm

110

40

67

911.2471

911.1471

911.1472

911.1473

911.1474

911.1475

911.1476

911.1477

TS8

TS10

TS15

TS20

TS25

TS27

TS30

TS40

12.0

12.0

12.0

12.0

12.0

12.0

12.0

12.0

25.0

25.0

25.0

25.0

25.0

25.0

25.0

25.0

8.0

8.0

9.0

5.0

6.0

6.0

7.0

7.0

10

10

10

10

10

10

10

10

50

TX-E socket for Mercedes, extra-short

• TX-E

• Ideally suited for various engine screws




• Matt finish

• Chrome vanadium

Application range: Engine screws (e.g. various supports, housing cover, etc.) on Mercedes diesel engines 642, 651 and petrol engines 276, 278, 271

Bit socket set for tamperproof five star screws




• Matt finish

• Chrome vanadium

• Includes storage rail



Five star profile tamperproof key wrench set

• Long design

• Bore hole at the short and long end

• Continuous hardened

• Matt chrome

• Special steel



160

911.1288

E12 22.0

25.0

40

VAG Bit socket for hexagon screws, extra long

• Hexagon socket with ball head

• For releasing and tightening the TDC sensor


• Extra-long design


• Matt finish

• Chrome vanadium

Application range: VAG models from 2005, 4-cylinder 2.0l diesel engines

CLASSIC Bit for tamperproof five star bits


• With external hexagon drive to DIN 3126 / ISO 1173 - C 6.3



• Nickel plated

• Special steel



330

ERGOTORQUE® screwdriver for TX screws, long

• One component handle

• Optimal power transmission

• With hanging hole

• Hardened blade

• Chrome finish with burnished tips

• Blade made of chrome vanadium

911.1598

4,0 11.0

300.0

80

911.3101

911.3102

911.3103

911.3104

911.3105

911.3106

911.3107

TS10

TS15

TS20

TS25

TS27

TS30

TS40

30.0

30.0

30.0

30.0

30.0

30.0

30.0

1

1

1

1

1

1

1

5

6

5

5

6

6

8

911.1670

911.1671

911.1672

911.1673

T15

T20

T25

T30

330.0

343.0

345.0

360.0

250.0

250.0

250.0

250.0

80.0

93.0

95.0

110.0

60

60

70

70


ERGOTORQUEplus® T-handle TX key wrench, long

• Extra long execution

• With two component handle


• Tip burnished

• Chrome plated and mirror polished

• Special steel

158.8051

158.8052

158.8053

158.8054

158.8055

158.8056

T10

T15

T20

T25

T27

T30

403.0

403.0

403.0

408.0

408.0

408.0

373.0

373.0

373.0

373.0

373.0

373.0

80.0

80.0

100.0

100.0

100.0

100.0

30

30

40

40

40

45

ERGOTORQUEplus® T-handle TX key wrench set




• Tip burnished


• Special steel

158.5121

158.5122

158.5123

158.5124

158.5125

158.5126

158.5127

M4

M5

M6

M7

M8

M9

M10

280.0

280.0

280.0

280.0

280.0

280.0

290.0

250.0

250.0

250.0

250.0

250.0

250.0

250.0

100

100

100

130

145

145

316

TOOLS FOR CYLINDER BLOCK SCREWS

ERGOTORQUE®precision torque wrench with rotary

mushroom ratchet head

• Actuation accuracy: ±3 % tolerance of the set scale value

• Precise reading accuracy for a minimum 5.000 tightening cycles

• For controlled fastening in clockwise and counter clockwise directions

• Torque setting by pulling out and pushing in the slide in knob at the end of the handle

• The direction of rotation (clockwise and counter clockwise) can be changed by simply rotating the square drive piece

• Double scale in N•m and lbf•ft divisions for precise adjustment

• Includes micrometer scale in N•m divisions for precise and fine adjustment

• Large vision panel, precise adjustment using a magnifying glass

• An audible and palpable signal when the desired torque value is achieved

• Exact gearing 72 teeth ratchet mechanism

• Torque setting is quick and easy using the locking knob in the handle end

• Secure locking function within the handle

• Two component handle with a soft zone, is ergonomic in design and comfortable in the hand

• Square drive adaptor to DIN 3120 - ISO 1174 with ball lock

• Individually marked with serial number unique product identification

• Includes test certificate in accordance with DIN EN ISO

6789:2003 national standard

Cylinder head bit socket for TX screws, extra-long

• TX


• Long execution

• Press fitted nickel plated insert bit


• Matt finish

• Chrome vanadium

911.1937

911.1938

911.1939

911.1940

T40

T45

T50

T55

22

22

22

22

140.0

140.0

140.0

140.0

72.0

72.0

72.0

72.0

125

125

125

125

Cylinder head bit socket for TX screws, long

• TX


• Long design

• With press fitted nickel plated insert bit


• Matt finish

• Chrome vanadium

Application range: e.g. Ford 1.8l Diesel (Turbo), Fiesta,

Escort, Sierra and Mazda 121 >1996

158.8050 6 pcs T10 - T15 - T20 - T25 - T27 - T30 375

CHROMEplus® T handle RIBE profile extra long


• With 2 component handle



• Special steel

Application range: e.g. valve cover and spark plug cover for

Alfa Romeo, Fiat, Lancia etc.

516.1412 1/4" 1-25 0.10 0,8 - 18 289.0 35.0 18.0 0.46

516.1422 3/8" 5-50 0.25 4 - 37 350.0 45.0 23.0 0.61

516.1432 1/2" 10-100 0.50 8 - 75 412.0 45.0 23.0 0.91

Rotary angle disc

• For fastening screws at an angle

• Device for angle regulated fastening with a torque wrench

• Flexible arm

• Range 0° - 360°


• Optionally with a magnetic arm or claw arm

516.1195 1/2" 1/2" magnet 2° 67.0 63.0 480.0 170

516.1196 1/2" 1/2" claw 2° 67.0 63.0 538.0 60

911.1517

T70 22.0

110.0

72.0

120

Cylinder head bit socket for spline (XZN®) screws, long

• Spline (XZN®)

• For loosening and tightening cylinder head screws


• Long design



• Matt finish

• Chrome vanadium

Application range: e.g. cylinder head screws on Toyota

Corolla 1.4l, Yaris 1.0l and VM diesel engines (e.g. Chrysler),

Volkswagen, Audi, Opel etc.

911.1350

911.1351

911.1352

911.1359

911.1353

911.1354

911.1355

911.1356

M5

M6

M8

M9

M10

M12

M14

M16

22.0

22.0

22.0

22.0

22.0

22.0

22.0

22.0

110.0

110.0

110.0

110.0

110.0

110.0

110.0

110.0

72.0

72.0

72.0

72.0

72.0

72.0

72.0

72.0

107

109

109

112

112

138

179

250

209

1

11

12

13

9

10

14

15

16

17

5

6

7

8

2

3

4

20

21

22

18

19

23

24

25

26 i


Cylinder head bit socket for spline (XZN®) screws, extralong

• Spline (XZN®)


• This length allows deep seated and difficult to access cylinder head screws to be removed and inserted without problem

• Internal square in accordance with DIN 3121 / ISO 1174




• Matt finish

• Chrome vanadium

Application range: Japanese cars with petrol engines, e.g.

Daihatsu, Toyota etc.

Cylinder head bit socket for RIBE® screws, long

• For tamperproof RIBE® profile


• Long execution

• Press fitted nickel plated insert bit


• Matt finish

• Chrome vanadium

Cylinder head 12-point socket, long

• 12-point



• Long design

• For machinery usage

• Phosphate

• Chrome molybdenum

Application range: Honda, Mitsubishi, Toyota, Suzuki

911.1394

M9 22.0

140.0

72

Cylinder head impact bit socket for RIBE® screws, extralong

• For RIBE® screws

• Internal square drive to DIN 3121 / ISO 1174



• Phosphate finish


911.3951

911.3952

911.3953

911.3954

911.3955

911.3956

911.3957

911.3958

911.3959

M5

M6

M7

M8

M9

M10

M12

M13

M14

22.0

22.0

22.0

22.0

22.0

22.0

22.0

22.0

22.0

110.0

110.0

110.0

110.0

110.0

110.0

110.0

110.0

110.0

72.0

72.0

72.0

72.0

72.0

72.0

72.0

72.0

72.0

120

120

120

120

130

130

150

180

180

Cylinder head bit socket set for RIBE® screws, long

• For RIBE® screws

• RIBE® profile for tamperproof screws


• Long design

• With press fitted insert bit


• Matt finish

• Chrome vanadium


Application range: Fiat Bravo, Brava, Alfa Romeo, Lancia

Dedra, Tipo, Tempra, diesel engines 1.9 – 2.5l; Opel 1.9l DTH

(Fiat-Motor), Audi, Seat, Škoda, Volkswagen etc.

515.1276

10.0

15.5

130.0

225

Cylinder head TX-E socket, long

• TX-E

• For loosening and tightening TX-E cylinder head screws

• With incorporated retaining ball for accurate removing of the bolt


• Long design


• Matt finish

• Chrome vanadium

Application range: M 42 1.8l, 4 cylinder engine with four-valve technology 318is from 1989, M50 2.0l, 2.5l, 6 cylinder with fourvalve technology 5 series from 1991, Audi V6 engine, Opel,

Mercedes CDI engines etc.

911.1395

M9 / M10 25.0

128.0

110

Cylinder head impact bit socket for RIBE® screws, extralong

• RIBE®





• Matt finish

• Chrome vanadium

Application range: Polydrive cylinder head screws for VAG

1.24

Cylinder head surface drive socket, long

• Special profile (Surface-Drive)



• Long design


• Phosphate


Application range: PSA (all new engines >2005)

911.4451

911.4452

911.4453

911.4454

911.4455

911.4456

E10

E12

E14

E16

E18

E20

150.0

150.0

150.0

150.0

150.0

150.0

260

260

260

260

260

260

Cylinder head TX-E socket set, long

• TX E

• For loosening and tightening TX E cylinder head screws

• With incorporated retaining ball for accurate removing of the bolt


• Long execution


• Matt finish

• Chrome vanadium

• In durable plastic storage case

515.1281

M10 22,0 165.0

160

515.1277

13,0 20.5

77.0

120 911.4450 6 pcs E10 - E12 - E14 - E16 - E18 - E20 1.90


Cylinder head 12-point impact socket set, short

• 12 point


• Short execution




• In durable plastic case

1.65

Cylinder head 12-point impact socket set, long

• 12 point


• Short execution





2.80


1

Cylinder head bit socket set for TX PLUS screws

• Ideal set compilation for TX and TX PLUS screws

• With external hexagon drive to DIN 3126 / ISO 1173 Form C

6,3 and C 8



• Reinforced execution

• Nickel plated

• Special steel

• In durable plastic storage box

Applications for TX PLUS:

Opel (Corsa) / Volkswagen Passat / Fiat 1,3 / 1,4 / Toyota /

Nissan / Renault / Subaru /GM / Ford etc.

e.g.: flywheel / timing belt housing cover / general engine / transmission

Applications for TX PLUS:

Volkswagen, Mercedes Benz (passenger car+HGV Actros/

Atego), Audi, Bosch, MAN, Ford, Opel, John Deere, etc.

e.g.: plug-in pumps of pump-line-nozzle systems, air mass meters, EWS3 immobiliser controller / injection pumps / alternators, etc.

911.3120 22 pcs TX PLUS socket set

consists of:

432

911.3240 1/4” CLASSIC TX PLUS bit, 30 mm, IP10





911.3260 10mm CLASSIC TX PLUS bit, 30 mm, IP40



911.3263 10 mm CLASSIC TX PLUS bit, IP55

911.3264 10 mm CLASSIC TX PLUS bit, IP60

911.4327 1/4” bit adaptor socket, with clamping ring

911.4311 3/8” bit adaptor socket, for bits 10 mm

5

5

5

6

6

5

13

14

16

5

6

5

5

20

25

10

30

10

11

11

13

22

Cylinder head impact bit socket set for RIBE® screws

• Ideal set compilation for RIBE® screws

• External hexagon drive to DIN 3126 / ISO 1173 form C 8

• Can be used by hand, electric screwdriver and impact drivers


• Reinforced execution

• Precise arrangement of the popular 5/16" RIBE® bits


• Special steel


9

1 x

6 x

7 x

911.4306

14 pcs CLASSIC Bit set

1/2“

820

M5 - M6 - M7 - M8 - M10 - M12

M7 - M8 - M9 - M10 - M12 - M13

M14

10

11

Cylinder head bolt socket set

• Range of all current inserts for cylinder head screws

• Correct and quick engine repair

• Chrome vanadium


Application range: Audi, Seat, Škoda, Volkswagen from

1996, Mercedes 6/8/12 cylinder engines, Opel, Ford, Japanese models, Renault, Opel (V6) and BMW from 1990

12

13

14

15

7

8

911.4460 11 pcs Cylinder head bolt socket set

consists of:

1.51

911.4452 1/2” TX-E-socket, long, E12

911.4453 1/2” TX-E-socket, long, E14

911.1940 1/2” bit socket TX, T55, 140 mm

911.1942 1/2” bit socket TX, T70, 140 mm

911.1359 1/2” bit socket XZN, M9, 110 mm



911.1395 1/2” impact bit socket for RIBE screws, XL

260

260

125

125

112

125

125

175

175

175

110

20

21

22

18

19

16

17

2

3

4

5

6

23

24

25

26

211 i

27.03.2015 10:18:12

Cylinder head screws socket wrench set

• Matt finish

• Chrome vanadium


Application range: Cylinder head screws, air quantity meter, oil drain plugs, gearbox oil, airbag, brake saddle, etc.

consists of: consists of:

911.1970 1/2” Bit socket XZN,L=140mm,M10


911.1974 XZN bit socket long, 1/2”, M14

911.1685 Ball head hex bit socket, 1/2”, 5x160mm

911.1327-

240

Hex bit socket, 1/2”, 7x240mm

911.1993 RIBE bit socket, 1/2”, M7x240mm



911.1624-

300

TX bit socket, 1/2”, T30, 300mm

175

194

125

125

125

125

125

185

175

Cylinder head bit socket set for RIBE® screws

• Ideal configuration for the most common RIBE® cylinder head screws


• Short and long design

• With press fitted insert bit


• Matt finish

• Chrome vanadium


Application range: Fiat, Alfa Romeo, Lancia, Opel, Audi,

Seat, Škoda, Volkswagen etc.

Cylinder head bit socket set for Spline (XZN®) screws

• Vielzahn (XZN®)

• Ideal for the most common cylinder head screws

• Matt finish

• Chrome vanadium


205

175

175

175

175

220

280

285

130

131

194

132

163

202

911.4500 38 pcs Automotive bit socket set

consists of:

6.50

911.1701 5 Star bit socket, 1/4”, TS10







911.1708 5 Star bit socket, 1/4” -TS45

911.1709 5 Star bit socket, 1/4” -TS50

911.1314 Hex bit socket, 1/2”, 14mm

911.1317 Hex bit socket, 1/2”, 17mm

911.1319 Hex bit socket, 1/2”, 19mm

911.1322 Hex bit socket, 1/2”, 22mm

911.1324 Hex bit socket, 1/2”, 24mm

911.1348 XZN bit socket tamperproof, 1/2”, M16

911.0954 Impact bit socket XZN, 1/2”, M18, L=75mm

911.1925 RIBE bit socket long, M9


911.1356 XZN bit socket, 1/2”, deep, M16

911.1960 Hex bit socket long, 1/2”, 10



911.1937 TX bit socket long, 1/2”, T40



911.1940 1/2” Bit socket TX,L=140mm,T55


911.1942 1/2” Bit socket TX,L=140mm,T70

112

112

250

125

90

100

100

125

125

125

125

125

125

150

200

200

200

140

146

10

10

10

10

10

10

10

10

10

120

911.4530 32 pcs RIBE® bit socket set

consists of:

5.46

39

40

108

108

109

109

112

112

175

175

175

35

36

37

39

32

34

35

911.1635 26 pcs XZN® socket-set

consists of:

4.46














80

80

90

95

100

100

110

140

107

109

109

112

112



911.1391 Bit socket XZN®, M5, length 140 mm

911.1392 Bit socket for XZN®, M6, length 140 mm

911.1393 Bit socket for XZN®, M8, length 140 mm




138

179

67

68

71

72

125

125



125

70

911.1594 Bit socket for XZN® screws, M10, length 200 mm 71

911.1596 Bit socket XZN®, M12, length 200 mm 110

911.1597 Bit socket XZN®, M14, length 200 mm 160


VIBRATION DAMPER TOOLS SERVICE STANDS AND PARTS STATIONS

BMW Vibration damper holding screw set

• For clamping the crank shaft when loosening and tightening the crankshaft central screw

• Prevents slipping whilst holding

• With replaceable and tight-fit guide sleeves (Ø 57.0 / 59.5 /

60.5 mm)

• Minimal force required thanks to extra-long lever

• Matt finish

• Chrome vanadium

Application range: When working on the timing drive of BMW

M47 TU / TU2 engines with old and new vibration damper design

Cylinder head service pillar

• Suitable for all current cylinder heads

• Especially for engines with horizontal camshafts

• Damage free working on the cylinder head

• Special steel

400.9042

VAG 714


150.1170

150.1171

150.1172

4.20

Parts storage for cylinder head components

• Ideal organisational aid for the systematic storage of small parts from the cylinder head

• Suitable for all cylinder heads

• No-loss work on cylinder heads

• Made from rugged plastic

4.60

consists of:

911.1721 Extension pipe, 1000 mm

911.1723 Guide sleeve, ∅ 57.0 mm

911.1724 Guide sleeve, ∅ 59.5 mm

911.1725 Guide sleeve, ∅ 60.5 mm

1900

1400

380

440

480

150.1173

404.0

450.0

230.0

1.70

VAG pulley wheel counter hold wrench

• For the professional engine repair

• Simple assembly and disassembly of the crank shaft pulley wheel or vibration dampers

• Special profiles allows for counter holding when releasing or securing the crank shaft central screw

• The handle can be lengthened via the 3/4” internal square

• Very high degree of accuracy

Application range: VAG group vehicles with 2.4 engines, in particular Volkswagen T2, T3 , T4 Transporter, LT , Golf ,

Passat and Audi (engine code: AAB, AJA, ADG, ABL, 1X, 1Y,

1W, 1V, CS, CW, KY, JR, JX, JD, JP, 1Z, AAT, AEL, AAZ, AHU,

AFN, AEY, AVG, ALE, AFF, AHH, ACV, AHY, AJT, AUF, AXG,

AXL, AYC)

Please carry out an up-to-date cross reference test for the specific vehicle on www.timingtools.de

SLIDE RAIL BOLTS EXTRACTION TOOLS

Puller set for slide rail bolts

• Allows simple removal for chain slide rail bolts

• For repair without cooler removal

• Includes tension bolts and adapter screw

• Special steel

Application range: for chain slide rail bolts for Mercedes,

BMW etc.

700.1135 5 pcs Puller set for slide rail bolts 580

1 consists of:

700.1136 Basic pullers

700.1137 Tension bolts M8 x 30 mm



700.1141 Adapter disk

GUIDE SLEEVES INTERNAL EXTRACTOR

520

5

20

20

15

Guide sleeves internal puller set for engines and gearboxes

• Damage-free removal and insertion of guide sleeves on engines and gearboxes

• Prevents damage to the guide sleeves from possible use of pliers or a hammer

• Centring shaft

• Enormous time and cost saving

• Universal usage

• Special steel


2.40

consists of:

700.1521 Impact hammer M8x1.25

700.1522 Collet for internal Ø 5 mm






1320

80

80

80

80

80

80

EXTRACTION TOOL AND SPIRAL PROFILE SOCKETS

15

18

19

16

17

20

Epoxy metal Quicksteel

• Optimal adhesive power

• Enables durable repair

• Mechanical preparation after the curing possible

• Firmly set after 15 minutes

• Cures after 60 minutes completely

• Also suitable for use under water

• Temperature resistant up to 260℃

• Approx three years use duration

• Resistant to oil, diesel, petrol and battery acid

Application range: Metal, glass, plastic, ceramics, wood, concrete optical fiber reinforced plastic, etc.

23

21

22

11

12

13

14

9

10

500.1015

Epoxy metal Quicksteel 80

24

25

26

213

5

6

7

8

2

3

4 i

27.03.2015 10:18:30

Screw grab screw assistance

• Increases the static friction by up to 400%

• Residue free washes off and non-toxic

• Immediate effect without waiting

• Applicable for all screw heads

• Unlimited storage

Application range: In rounded turned screw heads

Stud bolt puller

• Square drive adaptor to DIN 3120 / ISO 1174 with ball lock

• External drive hexagon socket 21 mm

• Right and left hand clamping function

• Safe clamping due to 3 rollers

• Stud screws can be screwed in or out without using counter nuts on the bolt

• Also for extra long studs that will go through the through socket


• Chrome vanadium

Screw bolt puller set








• Chrome vanadium


500.1010

15 ml


• For screwing in or extracting out stud bolts

• Clockwise and anticlockwise clamping function

• Also suitable for extra long stud bolts

• Special steel

250

152.1005

152.1006

152.1007

152.1008

152.1010

152.1012

152.1014

152.1016

152.1018

152.1002

152.1003

152.1004

152.1029

M16

M18

M20

M22

M24

M30

M5

M6

M7

M8

M10

M12

M14

303

838

818

748

728

1677

150

160

160

170

180

200

200

Screw bolt puller set








• Chrome vanadium


1.50

Spiral extractor


• With external drive hexagonal socket 13.0 mm

• Slightly conical tapered spiral

• Can also be used for broken screws and stud bolts

• Counter effect motion guarantees easy extraction

• Special steel

Application range: Hexagon head, brakes + Water pumps,

Spline drives etc.

670.0231

670.0232

670.0233

5 - 15

10 - 19

18 - 28

120

120

120

19 mm

19 mm

19 mm

360

400

450




• Also suitable for extra long stud bolts

• Special steel

670.0241

5 - 20 120 19 mm 400 152.1100 4 pcs M6 - M8 - M10 - M12 790

150.1371

150.1373

150.1375

150.1379

150.1381

150.1386

150.1387

150.1388

150.1389

150.1390

150.1391

150.1392

150.1393

150.1394

150.1395

5 mm

5,5 mm

6 mm

8 mm

10 mm

11 mm

12 mm

14 mm

1/8"

3/16"

1/4"

3/8"

1/2"

3 mm

4 mm

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

36.0

30

30

40

40

20

30

30

30

20

20

20

20

20

20

20


Captive bolt extractor set

• Extra short execution

• With hexagon drive SW 13

• Slightly conical tapered spiral

• Applicable also for dismantled screws and stand bolt

• Counter effect motion guarantees easy extraction

• Special steel


Application range: Hexagon head, brakes + water pumps, spline drives etc.

150.1385 15 pcs Captive bolt extractor set

consists of:

150.1371 Extractor 1/8"

150.1373 Extractor 3/16"

150.1375 Extractor 1/4"

150.1379 Extractor 3/8"

150.1381 Extractor 1/2"

150.1386 Extractor 3 mm



150.1389 Extractor 5.5 mm



150.1392 Extractor 10 mm

150.1393 Extractor 11 mm

150.1394 Extractor 12 mm

150.1395 Extractor 14 mm

360

Stud bolt extraction and insertion tool set


• With external hexagonal socket drive 17.0 mm and 19.0 mm

• Very flat compact and compact design


• Also suitable for extra-long stud bolts

• Special steel


20

30

30

30

30

30

40

40

20

20

20

20

20

20

20

544


consists of:

670.0256 Expansion sleeve, 2 pcs. M10 x 1.5




670.0263 Mounting sleeve, M10 x 1.5




60

60

40

60

40

40

40

40

Screw extractor set

• For screws from M3 - M18

• Enable the loosening of screws and bolts with turned off heads

• Conical tapered spiral


64

Spiral profile socket nut

• Very flat compact and robust execution

• Rejuvenating special profile with aggressive spiral nut

• Bites firmly to give a firm connection between stuck nut and head

• Can be used with a socket or ring spanner



300

Spiral profile impact socket



• For turning off of screws with rounded or turned heads




913.1473

913.1408

913.1410

913.1470

913.1412

913.1413

6,0

8,0

10,0

11,0

12,0

13,0

17.0

17.0

17.0

17.0

17.0

19.0

32.0

32.0

32.0

32.0

32.0

32.0

40

40

40

40

40

40

Spiral profile socket set








913.3881

913.3882

913.3883

913.3884

913.3885

913.3886

913.3887

913.3888

913.3889

913.3890

M8

M10

M11

M12

M13

M14

M15

M16

M17

M19

16,0

16,0

18,0

19,0

19,0

21,0

23,0

24,0

26,0

27,0

20

20

20

30

10

10

10

10

40

40

Spiral profile socket nut set

• For loosening and unscrewing of fixed bolt and nuts with damaged “round turned” threads or heads

• Special, left handed cutting edge thread with 6 conical reducing cutting edges

• Very flat compact and robust execution

• The drive can be used alternatively with a socket ring or combination spanner


913.1450 4 pcs Spiral profile socket set 200








913.3860

913.3861

913.3862

913.3863

913.3864

913.3865

913.3866

913.3867

913.3868

913.3869

10,0

11,0

12,0

13,0

14,0

15,0

16,0

17,0

18,0

19,0

15.0

16.0

18.0

18.5

20.5

22.0

22.5

24.5

26.0

27.0

34.0

34.0

34.0

34.0

34.0

34.0

34.0

34.0

34.0

34.0

30

30

40

40

40

60

60

70

80

80

215

1

11

12

13

9

10

14

15

16

17

5

6

7

8

2

3

4

20

21

22

18

19

23

24

25

26 i

27.03.2015 10:18:46








Spiral profile impact socket set





• Drive out pin




NUT SPLITTER

Mechanical nut splitter

• For the splitting of seized or over tightened bolts without damage to the bolt thread

• Suitable for nuts to a tensile strength class 6

• Special steel

913.1469

913.1468

913.1467

913.1466

913.1465

913.1464

913.1249

913.1250

913.1463

913.1252

913.1253

913.1462

913.1255

913.1461

12,0

13,0

14,0

15,0

17,0

19,0

19,0

20,0

21,0

22,0

23,0

24,0

25,0

27,0

34.0

34.0

34.0

34.0

34.0

34.0

50.0

50.0

34.0

50.0

50.0

34.0

50.0

34.0

40

50

70

70

70

90

90

110

90

120

130

110

150

110

Spiral profile socket set







913.3855 10 pcs Spiral profile impact socket set

consists of:

913.3860 3/8" Spiral profile socket, 10 mm









913.3870 Burr arbor

660

40

40

60

60

30

30

40

70

80

30

Spiral profile impact socket set





• Drive out pin




700.1181

700.1182

700.1183

700.1184

mm

12.0

14.0

19.0

21.0

76.0

93.0

124.0

150.0

9 mm 9-12 mm 90

11 mm 12-16 mm 170

16 mm 16-22 mm 380

18 mm 22-27 mm 660

Mechanical nut splitter set



• Special steel

700.1180 4 pcs Mechanical nut splitter set

consists of:

700.1181 Nut splitter 9 - 12 mm, drive 12 mm




1.58

90

170

380

660

Hydraulic nut splitter

• Small execution


• Work pressure max. 5 t

• Especially suitable for narrow hard to access areas

913.3850 4 pcs Spiral profile socket set

consists of:





200

30

30

40

40

913.1460 15 pcs Spiral profile impact socket set

8 x

1.10

1/2“: 13 - 14 - 15 - 17 - 19 - 21 - 24 - 27 mm

5 x

2 x

1/4“: 6 - 8 - 10 - 11 - 12 mm

1/4“

700.1150

7 -21 M4 - M14 210.0

700


1

Hydraulic nut splitter set

• Large execution


• Work pressure max. 13 t


700.1160 4 pcs 22 - 36 mm; M14 - M24

consists of:

700.1161 Replacement chisel large

700.1162 Replacement plate large

700.1163 Nut splitter

3.80

100

100

3600

110

THREAD BORING TOOL AND BORE JIGS

Stud extractor set

• Set contents for extensive applications

• For removing of threaded bolts, studding and screws

• No damage of the thread

• Only negligible enlarging of the threaded bolt through special profile extractor pin

• For screws and bolts M5 - M16

• Special steel


Cylinder head bore jig set

• Permits the quick and accurate boring out of broken or torn out stud screws on cylinder heads or exhaust flanges directly on the vehicle

• Universal usage

• High time savings of up to 4 hours

• Cylinder head does not need to be removed

• Straight boring out of old screw


Application range: Can be used universally on cylinder heads or exhaust flanges with bolt threads M8 and M10

2

3

4

5

6

9

10

7

8

11

12

13 Hydraulic nut splitter set


• Working range from 7.0 - 36.0 mm

• Inductively hardened cutting edge


• Requires light expenditure of energy

• Special steel

150.1305 25 pcs Stud extractor set

extractor:

700.1170 7 pcs Hydraulic nut splitter set

consists of:

700.1150 Hydraulic nut splitter 7.0 - 21.0 mm

700.1163 Nut splitter

700.1151 Replacement chisel small

700.1152 Replacement plate small

700.1161 Replacement chisel large

700.1162 Replacement plate large

5.00

700

3600

50

50

100

100

110

650

150.0521

1

150.0522

2

150.0523

3

150.0524

4

150.0525

5

3,2 1/8" M5 - M6 60.0 150.0511S 150

4,8 3/16" M7 - M8 70.0 150.0512S 180

6,4 1/4" M9 - M10 78.0 150.0513S 230

8,0 5/16" M12 83.0 150.0514S 300

8,7 11/32" M14 - M16 94.0 150.0515S 350

extractor nut:

150.0511

150.0512

150.0513

150.0514

150.0515

drill:

3

4

1

2

5

3

4

1

2

5

10,0

11,0

13,0

14,0

17,0

16.0

16.0

16.0

16.0

16.0

130

230

350

470

590

150.1305-21

150.1305-22

150.1305-23

150.1305-24

150.1305-25

3,2

4,8

6,4

8,0

8,7

bushes:

1/8"

3/16"

1/4"

5/16"

11/32"

1 - 4

5 - 7

8

9

10

65.0

86.0

101.0

117.0

125.0

20

20

20

20

20

150.0501 1 6.0 5.0 4.0 3.2 5/32" 1/8" 30.0

3

150.0502 2 8.0 6.0 4.8 3.2 3/16" 1/8" 30.0

8

150.0503 3 9.0 7.0 4.8 3.2 3/16" 1/8" 30.0 10

150.0504 4 10.0 8.0 4.8 3.2 3/16" 1/8" 30.0 14

150.0505 5 10.0 8.0 6.0 4.8

3/16" 30.0 12

150.0506 6 11.0 9.0 7.0 4.8 9/32" 3/16" 30.0 14

150.0507 7 12.0 10.0 7.0 4.8 9/32" 3/16" 30.0 18

150.0508 8 13.0 11.0 7.0 4.8 9/32" 3/16" 30.0 22

150.0509 9 13.0 11.0 9.0 6.5

1/4" 30.0 17

150.0510 10 14.0 12.0 9.5 6.5 3/8" 1/4" 30.0 21

150.7040 28 pcs Cylinder head bore jig set

1.36

consists of:

X

150.7030

150.7031

150.7032

150.7033

150.7034

150.7035

150.7036

150.7037

150.7038

150.7039

150.7041

150.7042

150.7043

150.7044

150.7045

150.7046

150.7047

150.7048

150.7049

150.7050

1 Drilling template

3 Centring pin, conical

3 Guide sleeve, Ø 8.0 mm

3 Guide sleeve, Ø 10.0 mm

2 Hexagon collar nut, M8

2 Hexagon collar nut, M10

1 Drill bush with cylinder pin, 4.0 mm



1 Guide sleeve, M8

1 Guide sleeve, M10

1

1

1

Drilling stop with cylinder screws,

4.0 mm


6.5 mm


8.5 mm

1 Hexagonal key socket wrench, 2 mm



1 Special spiral drill, Ø 4.0 mm



18

35

30

25

60

60

120

40

20

20

12

40

40

40

14

23

28

8

13

22

14

15

16

17

23

24

25

26

20

21

22

18

19

217 i


CRANK SHAFT FACING TOOLS

Face milling attachment for crank shaft mating surfaces

• Precise repair of damaged mating surfaces on the front of the crank shaft

• Prevents repeated loosening of the toothed belt wheel by reworking the mating surfaces

• Accurately guided mill using the centring pin

• Front is reworked precisely on angles and planes

• Correct seat of the new toothed belt wheel

Application range: Audi, Volkswagen, Ford, Seat, Škoda 1.9l diesel engines, 5-cylinder engines (engine code: e.g. ACV,

AHY), 4-cylinder engines with crank shaft thread M16x1.5 engine code AGR, Volkswagen 5-cylinder engine code ACV from engine number 048 995 and AAB from engine number 424 606

Antimagnetic brass feeler gauge

• For the testing of intervals, contact distances, etc.

• Feeler gauge conical tapered

• Fixing nut

• Leaves individually marked with size

• Blades made of brass

300.0611

8

300.0612 13

300.0613 20

0,05-0,1-0,15-0,2-0,25-0,3-

0,4-0,5

0,05-0,1-0,15-0,2-0,25-0,3-0,4-

0,5-0,6-0,7-0,8-0,9-1,0

0,05-0,1-0,15-0,2-0,25-0,3-

0,35-0,4-0,45-0,5-0,55-0,6-

0,65-0,7-0,75-0,8-0,85-0,9-

0,95-1,0

100.0 55

100.0 70

100.0 85

Piston tolerance gauge


• Feeler gauge cylindrical

• Blades fan shaped on a ring


• Blades made out of hardened spring steel

Valve pneumatic adapter, flexible

• For holding up the installed valves when removing and fitting the valve fixing wedges on the cylinder head

• Can be used universally in place of the spark plugs or glow plugs

• Ideal when replacing the valve shaft seals without removing the cylinder head

• For hard to reach spark plugs and glow plugs too

• Can also be used as an adapter for pressure loss testing

• Flexible reinforced hose

515.1043

515.1041

515.1042

mm

M12 x 1,25

M14 x 1,25

M10 x 1,25

250.0

250.0

250.0

150

150

150

VALVE RETAINER AND VALVE SPRING TENSIONER

Tappet retainer

• Required for valve adjustment

• For retaining the tappet

• Functional area additionally surface hardened

• Phosphate

• Chrome vanadium

Application range: all 4 / 5 / 6-cylinder engines with tappet

385

consists of:

150.7011 Face milling cutter, Ø 35.0 mm

150.7012 Cleaning brush

150.7013 Special socket

150.7014 Centring bolts, M14 x 1.5 x 73 mm

VALVE GAUGES

Feeler gauge


• Feeler gauge conical tapered

• Fixing nut


• Blades made out of hardened spring steel

150

11

65

50

300.0614

300.0617

8

8

300.0615 13

300.0618 13

300.0616 20

0,05-0,1-0,15-0,2-0,25-0,3-

0,4-0,5

0,05-0,1-0,15-0,2-0,25-0,3-

0,4-0,5

0,05-0,1-0,15-0,2-0,25-0,3-0,4-

0,5-0,6-0,7-0,8-0,9-1,0

0,05-0,1-0,15-0,2-0,25-0,3-0,4-

0,5-0,6-0,7-0,8-0,9-1,0

0,05-0,1-0,15-0,2-0,25-0,3-

0,35-0,4-0,45-0,5-0,55-0,6-

0,65-0,7-0,75-0,8-0,85-0,9-

0,95-1,0

150.0 30

200.0 50

150.0 80

200.0 150

150.0 150

VALVE PNEUMATIC ADAPTER

150.0909

245.0

220

Valve pneumatic adapter

• For holding up the installed valves when removing and fitting the valve fixing wedges on the cylinder head

• Suitable for spark plug thread M14 x 1.25 and M18 x 1.5

• Ideal when replacing the valve shaft seals without removing the cylinder head

• With 13 mm hexagon pneumatic connection and rubber rings for sealing

• Special steel

Application range: For all petrol engines with sufficient clearance in the spark plug bore, e.g. Volkswagen, Audi, Ford

(excluding CVH and multi-valve engines) etc.

Valve retainer

• For the suppression of the cup valve stem for the removal of the valve platelets

• Special steel

Application range: Opel-Diesel 1,5 D + 1,7 DT-Isuzu Renault

1,7 Diesel, Engines F2N + F3N + F8Q z.B. Clio, R19, R21,

R9,Super 5 Volvo Diesel 340, 440, 460 + 480 Engines B 172K

+ B 18KD, Mazda 323 S - 1.7 TD

300.0600

20 100.0

0,05-0,10-0,15-0,20-

0,25-0,30-0,35-0,40-

0,45-0,50-0,55-0,60-

0,65-0,70-0,75-0,80-

0,85-0,90-0,95-1,00

88

515.1002

140.0

240

150.1211

145.0

445


Valve spring assembly tool

• Required the assembly and removal of the valves

• Universal usage


• Expansion of the cylinder head is generally not necessary

• Special steel

Application range: BMW, Ford, Mercedes, Opel, Porsche,

VAG etc. with SV OHV and OHC engines

150.0919

405.0

150.0919-1 700

150.0918

305.0

745

Valve spring clamp for Ford CVH-engines

• For clamping the valve springs in the course of restoration works in the area of the cylinder head

Application range: 1.3 / 1.4 and 1.6 litre of CVH engines in the Escort (incl. XR31 and RS Turbo), Fiesta (incl. RS Turbo) and Orion

PSA - Valve spring compressor

• For the professional engine repair

• For retaining the valve springs

• Universal usage

• Includes 8 screws with pressure cone and 2 locking screws

• Chrome vanadium

• Very high degree of accuracy

Application range: Citroën Berlingo, Xsara petrol engines with 1.0, 1.1, 1.4, 1.6l, and Peugeot 106, 205, 206, 306, 307,

405 with petrol engines

Please carry out an up-to-date cross reference test for the specific vehicle on www.timingtools.de

150.0924

400.0

1.22

Valve mounting bridge set

• For assembly and removal of valve springs

• For fitted or removed cylinder head

• Can be used universally with various assembly and adjustment options

• Enormous cost and time saving

• Removal of cylinder head not necessary for repair of valve shaft seals or valve springs

• Flange fastenings can be attached crossways or parallel to the cam shaft axis from the cylinder head

• Optionally upgradeable with specific pressure pieces

• Special steel

Application range: All cylinder heads from 1 to 12-cylinder engines, 2 to 4 valve technology for which the valves are arranged in a row or in a V.

150.1160

24 100.0

320

Valve spring tension

• Easy and quick change of the valve

• Expansion of the cylinder head is not necessary

• Use in conjunction with pneumatic adapter 150.1105 /

150.1107

• Special steel

150.1210

130.0

442

Valve spring compressor for VAG

• For retaining the valve springs

• Replaceable plastic pressure piece

• Chrome vanadium

• Surface finished in chrome

Application range: e.g. VAG with tappet engines 1.3 – 1.8l with stud bolts M8

400.9001

390.0

2.50

Valve spring clamping yoke

• Robust, adjustable and cam assembly tool with parallel stroke

• The tool is to be sure special for motors with horizontal camshaft (OHC motors) conceives, can however also be used in small and medium-sized OHV engines where neede

• The activity handles locks automatically after the clamping of the valve spring so that the hands remain free for removing and/or placing of the valve wedges

Application range: Passenger cars and vans

150.1135

150.1140

1

2

10.0 135.0 160,0 25.0

30.0 2.00

20.0 120.0 240,0 25.0

30.0 2.00

Valve spring compressor for Peugeot


• For fitted or removed cylinder head

• For valve springs with tappet with Ø 38.0 mm

• Universal usage

• Chrome vanadium

Application range: Peugeot

160.0270 15 pcs Valve mounting bridge set 8.28

consists of:

X

160.0271

160.0272

160.0273

160.0274

160.0275

160.0276

160.0277

160.0279

160.0295

2 Foot

1 Rod

2 O-ring 17 x 4

1 Pressure lever

1 Threaded pin M8 x 50

1 Clevis with spring cap bolts M8 x 32

4 Thrust bolt

2 Hexagon bolt M8

1

Valve pressure adaptors for mounting bridges

20

60

60

10

1240

1940

10

880

120

219

1

11

12

13

9

10

14

15

16

17

5

6

7

8

2

3

4

20

21

22

18

19

23

24

25

26 i


Valve pressure adaptors for mounting bridges


• For use in conjunction with valve mounting bridge

• Special steel

160.0289

160.0290

160.0291

160.0292

160.0293

160.0294

160.0295

160.0280

160.0281

160.0282

160.0283

160.0284

160.0285

160.0286

160.0287

160.0288

Pressure adaptor external Ø 21 mm
















Peugot, Citröen HDI

Opel, Seat, Audi, VW

Hyundai

Toyota, Ford 16V

Nissan

Toyota

Opel, Peugot

Renault 19/Clio 120

BMW, VW, Peugot

Diesel

Renault, Mazda,

Peugot 106, Mercedes

M102, M104

Fiat

120

130

140

Peugot, Citröen

Mercedes OM 601,

602, 603

Ford

Fiat Diesel

BMW M40

40

50

60

70

80

90

100

150

160

170

180

120

Valve dismantling and assembly tool set

• Assortment for changing of defective sealings on the cylinder head

• Enormous time savings as the cylinder head does not need to be dismantled

• For a correct and damage free use


consists of:

115.1061 Valve shaft sealing Pliers, 275 mm

150.1101 Male coupling AG 1/4”, TSC 06

150.1103 Male coupling AG 1/4”, ORG 08

150.1104 Male coupling AG 1/4”, IRC 06

150.1106 Hold down

150.1108 Valve wedge tool, with magnet

150.1110 Valve spring plate Adaptor

150.1111 Connection shaft, 510 mm

150.1112 Valve shaft sealing Pliers, angled

150.1113 Assembly sleeve

150.1114 Impact arbor

150.1115 Screw and bolt set, 14 pcs for hold down

150.1116 Cheeks for bridge 2 pieces

150.1117 Assembly sleeve No.6 17 x 11 mm






150.1124 Screw set for cheeks, 8 pcs

380

80

60

150

40

40

30

30

40

40

100

130

710

330

120

310

60

260

380

20

20

20

220

VALVE SHALT SEALING TOOLS

Valve shaft removal pliers

• Slim execution

• Plastic coated jaws

• Knurled handle

• With self opening mechanism

• Quick and easy removal of valves from the valve shaft

• For the extension of the valve spring lever

• Ideally suitable for engines with 4 valve technology

• Nickel plated execution

• Special tool steel

115.1061

0-125 275,0 100.0

380

Valve sealing ring pliers, long

• For removing valve shaft seals on multi-valve engines

• For easy removal of deep seated valve shaft seals using extra-long jaws

• Hardened jaws

• Longitudinal teeth

• Functional area dip-insulated to avoid damage to the valve control

• Straight design

• Special steel

Application range: Volkswagen, Audi, Ford, Opel, Nissan etc.

115.3008

270.0

340

Valve shaft sealing pliers

• Slim design

• Knurled handle

• Quick and clean removal of valve shaft sealing rings

• For removal of the valve spring support

• Ideal for engines with 4 valve technology

• Nickel-plated finish


Valve sealing ring pliers

• For removing valve shaft seals on 2-valve engines

• Hardened jaws

• Longitudinal teeth

• Functional area dip-insulated to avoid damage to the valve control

• Straight design

• Special steel

Application range: Volkswagen, Audi, Ford, Opel, Nissan etc.

150.1112

• Special steel

275.0

Valve plate pliers for Volkswagen

• For replacing the valve plates

• Tempered tips

330

Application range: Volkswagen tappet engines from 1.3 l

4.20

115.3007

250.0

340

115.3009

265.0

220


1

Valve shaft seal pusher

• For pushing on valve shaft seals Ø 7.0 mm on multi-valve engines

• Plastic

Application range: Multi-valve engines M104, M119, M120

Valve shaft sealing ring tool set

• Permits the assembly and removal of valve shaft sealing rings

• Universal usage

• Damage-free operation due to wear-resistant plastic pusher

• Includes extra-long pliers and slide hammer puller with collets


STAINLESS STEEL Chisel scraper set

• Continuous stainless steel blade that can be re sharpened

• With reinforcement eyelet

• With hammer cap on the handle

• With ergonomic moulded two component handle

• Suitable for use at extremely low temperatures

• Extreme resistance to intergranular corrosion and oxidation

• Extremely long service life

• Autoclavable (heating of the tools to over 100°C to kill germs)

• Rust-proof and acid resistant

• Stainless steel

150.0945

265.0

80

Valve shaft seal pusher

• For pushing on valve shaft seals Ø 7.0 mm and 8.0 mm


• Special steel

Application range: BMW and Opel Omega B 2.5l turbo diesel

150.3510 16 pcs Valve shaft sealing ring tool set

consists of:

3.36

150.3511 Push-on mandrel Ø 9.5 mm











150.3522 Collet for valve shaft sealing ring

150.3523 Collet for valve shaft sealing ring, small

150.3524 Slide hammer puller basic unit

150.3526 Plastic sleeve

115.3008 Valve sealing ring pliers, long

60

340

240

1220

20

340

60

60

60

60

60

60

60

60

60

60

GASKET SCRAPER

580

Gasket scraper

• Ideal for removing stickers, seal and glue residues

• Blades can be re-sharpened

• Blade 10° angled

• Extra-long design for hard to reach areas

• Also for removing extremely stubborn impurities and seal residue

• With ergonomic moulded one component handle

150.8001

150.0

98

Slide hammer puller for valve shaft sealing ring

• Special construction allows quick and easy removal of seized valve shaft sealing rings

• Universal usage

• Secure working without damage to the tappet guide on the cylinder head

• With collect and plastic sleeve

• Special steel

STAINLESS STEEL Chisel scraper


• Also suitable for the removal and chiselling of plates or welding spots

• Heavy, continuous stainless steel blade that can be resharpened

• With reinforcement eyelet

• With hammer cap on the handle


• Suitable for use at extremely low temperatures

• Extreme resistance to intergranular corrosion and oxidation

• Extremely long service life

• Autoclavable (heating of the tools to over 100°C to kill germs)

• Rust-proof and acid resistant

• Stainless steel

907.2231

907.2232

907.2233

907.2234

12.5

25.0

12.5

25.0

Gasket scraper set

200.0

200.0

300.0

300.0

100,0

100,0

200,0

200,0

120

140

180

200


• Blades can be re-sharpened

• Blade 10° angled


• Also for removing extremely stubborn impurities and seal residue

• With ergonomic moulded one component handle

11

12

13

9

10

14

15

16

17

5

6

7

8

2

3

4

150.0941

10 - 19 350.0

1.38

907.2211

907.2213

907.2212

907.2214

32.0

25.0

32.0

25.0

1,2

1,2

2,5

2,5

190.0

165.0

190.0

165.0

160

100

160

110

1.28

20

21

22

18

19

23

24

25

26

221 i


Gasket scraper set

• For removing seal residue, e.g. cylinder head seals

• With replacement blade


• Angled blade head


• Special steel

Slide hammer puller with thread tip

• For the removal of radial shaft seals and small bearings

• For hard to reach places too

• Quick and easy to remove

• Using the blow weight the thread tip is hit into the radial shaft seal and turned by hand and then removed with the blow weight

• Universal usage


• Special steel

Magnet and hook tool set

• Ideal for removing and inserting O-rings and seals

• With telescopic magnet attachment and replaceable hook

• Storage compartment in the handle for the various attachments

• Special steel

907.2280 2 pcs Gasket scraper set

consists of:

907.2281 Scraper, 270 mm

907.2282 Scraper blade

180

155

5

Scraper blades

• 5 replacement blades for seal scraper 907.2280

• For removing seal residue, e.g. cylinder head seals

• For angled blade head

• Special steel

907.2285

5 22.0

12.0

21.0

25

SEALING RING TOOLS

Double hook tool

• sickle-shaped

• For the removal of sealing rings


• Long durability through hardened leverage

• Universal usage

• With one component handle

150.3611

Slide hammer puller with thread tip 500

Radial shaft seal remover set

• For the removal of radial shaft seals and small bearings

• For hard to reach places too


• Using the blow weight the thread tip is hit into the radial shaft seal and turned by hand and then removed with the blow weight

• Long durability through hardened leverage

• Universal usage

• Special steel

550.1080 6 pcs Magnet and hook tool set

consists of:

70

550.1081 Basic unit

550.1082 Telescopic magnet attachment, 90 - 390 mm

550.1083 Hook attachment, straight, 75 mm

550.1084 Hook attachment, 90°, 75 mm

550.1085 Hook attachment, 120°, 75 mm

550.1086 Hook attachment, lateral bend, 75 mm

5

5

35

13

5

5

Hook tool set

• Ideal for removing and use of O rings and seals

• With one component handle


• Special steel

150.3610 2 pcs Radial shaft seal remover set

consists of:

550.1060 Gasket ring dismantling tool

150.3611 Slide hammer puller with thread tip

Hook tool set


• Special steel

880

380

500

550.1060

300.0

195.0

85.0

12.0

380

550.1040 2 pcs Hook tool set

consists of:

30

550.1041 Hook tool with double blade 90° shortl/ 180° short angled 11

550.1042 Hook tool with double blade 45° long / 90° long 11

550.1045 4 pcs Hook tool set

consists of:

120

550.1046 Hook tool 120mm blade, straight version 27

550.1047 Hook tool 120mm blade, 45° angled version 27




1

Master hook tool set



• Special steel

Sealing ring assembly set for BMW

• For assembly and removal of sealing rings

• Specially for the front crankshaft radial sealing ring

• Includes puller and mounting tool

• Special steel


Application range: BMW engines N40, N42, N43, N45, N45T,

N46, N51, N52, N52K, N53, N54

Universal crank seal remover and installer set

• Suitable for the damage-free and correct assembly and removal of radial shaft seals and drive shaft circlips

• For tight-fit application on engine shafts such as crank shaft, cam shaft or intermediate shaft

• Can used universally for radial sealing rings in diameters from

21.5 mm to 64.0 mm


• No need to strip the engine

• Prevents damage to the aluminium fits

• Set contents for extensive applications

• Includes puller and pressing tool

• Prevents the ring from becoming loose


Application range: Extensive universal tool including pressing tools for radial sealing rings in diameters from 21.5 mm to 64.0 mm on almost all vehicles

2

3

4

5

6

7

8

550.1070 9 pcs Master hook tool set

consists of:

680

150.3625 4 pcs Sealing ring assembly set for BMW 2.18

consists of:

550.1046 Hook tool 120mm blade, straight version 27




550.1071 Hook tool large, straight

550.1072 Hook tool large, 90°offset

91

105

88 550.1073 Hook tool large, sickle form

550.1074 T-handle hook tool, S-form small

550.1075 T-handle hook tool, S-form big

42

96

Sealing ring removal tool for VAG

• For the quick and correct removal of the sealing rings on engine shafts such as the crank shaft, cam shaft or intermediate shaft


• No need to strip the engine

• Universal usage

• With external drive hexagonal socket 22.0 mm

• With internal square drive to DIN 3120 / ISO 1174

• Special steel

Application range: e.g. Volkswagen, Audi, Seat, Škoda engines etc.

150.3626 Extraction tool

150.3627 Mounting tool Ø 90 mm

150.3628 Mounting tool Ø 60 mm

150.3629 Mounting tool nut

500

280

560

100

Assembly tool set for sealing flange with sensor wheel

• For the correct and damage-free assembly of the sealing flange

• With integrated pulse sensor wheel

• Exact sensor wheel adjustment - Precise sensor signal

• No need for reworking with repeated removal of the gearbox


Application range: Volkswagen, Audi, Seat, Škoda, Mitsubishi petrol and diesel engines e.g. 1.0, 1.4, 16V, 1.4 FSI, 1.6 16V,

1.6 FSI, 1.9 TDI, 2.0 TDI, 2.0 TDI 16V, 2.0 SDI, 2.0 DI-D with

Audi (A2, A3), Volkswagen (Polo, Golf IV/V/Plus, Passat), Seat

(Arosa, Ibiza, Leon), Škoda (Fabia, Octavia) and Mitsubishi

(Grandis, Outlander)

consists of:

700.1277 Steel sleeve 22 mm, long for 700.1280

700.1278 Steel sleeve 27 mm, long for 700.1280

700.1279 Main body for 700.1280

700.1281 Hook 70 mm, for 700.1280 5 pcs

700.1282 Hook 114 mm, for 700.1280 5 pcs

700.1283 Adapter sleeve for 700.1280

700.1284 Nut 20.2 mm for 700.1280

700.1285 Nut 18.2 mm for 700.1280

700.1286 Nut 16.2 mm for 700.1280

700.1287 Nut 14.2 mm for 700.1280

700.1288 Nut 12.2 mm for 700.1280

700.1289 Nut 10.2 mm for 700.1280

700.1290 Nut 8.1 mm for 700.1280

700.1291 Adapter 27.6 mm for 700.1280

700.1292 Adapter 45.9 mm for 700.1280

700.1293 Adapter 48.9 mm for 700.1280

700.1294 Adapter 56 mm for 700.1280

700.1295 Adapter 64 mm for 700.1280

700.1296 Adapter 33.6 mm for 700.1280

700.1297 Adapter 41.9 mm for 700.1280

700.1298 Steel sleeve 10 mm for 700.1280

700.1299 Steel sleeve 18 mm for 700.1280

1.90

10

37

27

27

35

55

35

21

19

17

15

30

80

145

22

75

25

23

180

220

140

12

9

10

11

14

15

18

19

20

12

13

16

17

21

22

150.3616

150.3617

150.3618

22.0

22.0

22.0

27,0

32,0

55,0

67.0

68.0

69.0

465

622

757

consists of:

X

150.3651

150.3652

150.3653

150.3654

1 Housing with centring pin

1 Flange with spindle and nut

2 Guide bolts, Ø 10 mm

3 Guide bolts, Ø 6 mm

1.74

880

460

30

31

23

24

25

26

223 i


VALVE SEAT CUTTER

Universal valve milling set for valve seat machining

• Suitable for reworking/milling valve seats

• Milling heads prevent chatter marks and ensure uniform force distribution

• Can be used universally for unhardened valve seats

• Special steel


Application range: for engines with lead-free fuel

Valve seat grinding set

• With two sided sucker

• For the bow on the valve seat in the cylinder head

• Body made out of sealed hard wood

• Suckers made out of rubber

150.1130 2 pcs Valve seat grinding set

consists of:

2.21

150.1131 Valve set grinder 19/22 mm, 245 mm long

150.1132 Valve set grinder 22/32 mm, 255 mm long

33

34

Valve grinding tool with 2 suction discs

• 8 mm bore reception

• For the grinding of the valve seats for repair work

• The detention of the device body is automatically generated via a transmission, the typical right left wing movement used in grinding

• Gives you convenient and rapid seat grinding with the drill between approx. 500-1.000 rpm

consists of:

515.2006 Pneumatic valve grinder

515.2007 Sucker, Ø 20 mm

515.2008 Sucker, Ø 30 mm

515.2009 Sucker, Ø 34 mm

515.2010 Sucker, Ø 45 mm

VALVE WEDGE ASSEMBLY

1430

4

7

16

20

Valve wedge assembly tool Ø 5mm, Opel, Volkswagen,

Audi

• For the assembly of valve wedges

• Easy to fit even in cramped spaces

• Also suitable for valve springs that are arranged deep in the cylinder head or are seated in a cup guide

• Allows easy and secure assembly of one- and three-grooved valve wedges on fitted and removed cylinder head

• Special steel

Application range: Opel, Volkswagen, Audi

1.90

consists of:

150.3571 T-handle

150.3572 Double-sided mill, 45°+75°, 28-35 mm






150.3578 Stepless adjustable guide, 6.5 mm




150.3582 Valve milling guide 5.5 mm

VALVE CUTTER

400

50

65

95

105

175

150

60

80

100

130

45

Valve grinder

• With two sided sucker

• For grinding the valve seat in the cylinder head

• Body made out of sealed hard wood

• Suckers made out of rubber

150.1165

130.0

150.1166

150.1167

442

Pneumatic valve grinding tool with 4 suction discs

• For grinding the valve seats after repair work

• Allows convenient and rapid grinding


150.7056

5

VALVE ADJUSTMENT TOOLS

50

Valve adjustment push-through square

• Push-through square

• Valve adjustment tool for spinning the engine when adjusting the valve, control times

• Serviceable from both sides

• For use with a 1/2" push-through ratchet

• Special steel

Application range: Mercedes engine type 102, 103, 104, 110,

115, 116, 117, 119, 120, 123

150.3585

80.0

Ratchet

• Ratchet with 1/2" square drive

• E.g. for tuning the engine crank alignment tool

80

150.1133

150.1131

150.1132

150.1134

16/21

19/22

22/32

29/35

210.0

245.0

255.0

225.0

60

33

34

60


1.69

130.1000

270.0

500

27.03.2015 10:20:15

Valve adjustment spanner

• For adjusting the valves

• Prevents the valve plate

• Universal usage

• Can be used in conjunction with 150.3589 or 150.3590

• Special steel

150.3587

30,0 170.0

Valve adjustment spanner

• For adjusting the valves

• Can be used in conjunction with 150.3587

• Can be used in pairs

• Special steel

135

150.3589

150.3590

14,0

14,0

PISTON RING TOOLS

150.1175

150.1176

150.1177

50-100

80-120

110-160

0-100

0-120

0-160

225.0

160.0

140

100

Piston ring pliers

• PVC dipped handle

• For the safe disassembly and assembly of piston rings

• Nickel plated surface


210.0

220.0

280.0

305

340

445



• Special wheel clamps with suspension hole for fixing the piston ring when splaying

• With restriction of the splaying dimension

• Special steel

115.1301

60-140 2.3/8" - 5.1/2" 330


• For the removal and replacement of piston rings

• Suitable for most passenger cars and vans

• Plastic coated handle

• Self closing pliers

• Special steel

150.1179

221.0

210

Piston ring tensioning tool

• Flexible tool for assembly and removal of piston rings

• Profiled tension band Ø 38.0 mm

• Low friction between tension band and piston ring

• The profile band cannot slip between the piston and cylinder

• Universal usage

115.3014

75,0-125,0 123

Piston ring tension band set

• For the pretensioning of the piston rings when inserting the piston in the cylinder

• Self locking ratchet function



150.1150 7 pcs Piston ring tension band set 1.62

1 consists of:

150.1151 Piston ring tension band plier

150.1152 Tension band, Ø 73 - 79 (2.7/8" - 3.1/8")

150.1153 Tension band, Ø 79 - 86 (3.1/8" - 3.3/8")

150.1154 Tension band, Ø 86 - 92 (3.3/8" - 3.5/8")

150.1155 Tension band, Ø 92 - 98 (3.5/8" - 3.7/8")

150.1156 Tension band, Ø 98 - 105 (3.7/8" - 4.1/8")

150.1157 Tension band, Ø 105 - 111 (3.7/8" - 4.3/8")

380

90

90

100

110

110

120

Piston ring tension band

• For the pretensioning of the piston rings when inserting the piston in the cylinder

• Continuous adjustment of operating tool

• Spring steel strip

9

10

150.1141

150.1142

150.1143

150.1144

45 - 90

57 - 125

90 - 175

90 - 175

1.3/4" - 3.1/2"

2.1/4" - 5"

3.1/2" - 7"

3.1/2" - 7"

50.0

100.0

100.0

150.0

158

300

340

555

11

CYLINDER LINER TOOLS

12

Securing straps for PSA

• Prevents the lift-off of the cylinder liners from their seat

• Securing straps prevent the cylinder liners coming away from the engine block

• Can be used with wet cylinder liners

• Supplied in pairs

• Special steel

Application range: Citroën, Peugeot and Renault engines

13

14

15

150.3593

2 pcs 75,0-106,0 12.0 mm 130.0

260

18

Lever for cylinder head for PSA

• For removing cylinder heads on engines with wet cylinder liners

• Prevents the lift-off of the cylinder liners from their seat

• Cylinder head should not be lifted off, but instead rolled off to the side and secured with the securing straps 150.3593

• Supplied in pairs

• Special steel

Application range: Citroën, Peugeot and Renault etc.

19

20

21

22

16

17

150.3594

2 pcs 12.0

280.0

1.14

23

24

25

26

225

5

6

7

8

2

3

4 i

27.03.2015 10:20:26

CYLINDER HON DEVICES TEST AND MEASURING TOOLS

Cylinder honing machine

• For honing / deburring of cylinders, bearings, bores, pipes, etc.

• Interchangeable honing

• Automatic spigot end and exact honing

• Flexible drive shaft for air or electric drills

• Special steel

Application range: Automotive brake and clutch cylinders, engine cylinders of motor cycles,lawn mowers, outboard motors, hydraulic cylinders, marine and industrial engines, etc.

Precision straightedge

• In accordance with DIN 874/00

• Hand warmth protection

• Test area precise and finely engineered

• Flatness tolerance for highest accuracy

• For controlled and test working in the light gap procedure

• Hardened

• Stainless steel

Electronic professional stethoscope

• For the professional defect diagnosis

• Serves the acoustic test and judgment of a component under load

• Delivers fast, absolutely clear and unambiguous test results over sounds

• Contains 6 independent sensors that can mounted for example on the vehicle floor or in the engine compartment for ease

• Simple coordination of the defect source through colour coded cable and colour table on the box


Application range:

Engine: Valves, baerings, piston pins

Alternator: Bearing sounds

Differential: Barrel sounds

Bodywork: Creak and squeak sounds

300.0630

300.0631

300.0632

300.0633

300.0634

300.0635

300.0636

300.0637

300.0638

300.0639

50.0

75.0

100.0

125.0

150.0

200.0

300.0

400.0

500.0

600.0

25.0

25.0

25.0

25.0

25.0

25.0

25.0

25.0

25.0

25.0

40

60

80

100

120

160

240

320

400

480

Precision straightedge

• For the inspection and the exact working on cylinder heads

• In accordance with DIN 874/1

• Double T profile rail with rear 5 hand slots

• On edge and flat sides examination process

• Hanging hole

• Steel

150.1180

150.1185

150.1190

150.1195

18 - 63

19 - 69

32 - 89

51 - 177

2

3

3

3

150.1181

150.1186

150.1191

150.1196

0.90

1.30

1.40

1.90

Replacement stones

• Replacement honing stones for 150.1195

• For Honing/Deburring of cylinders, bearings, bores, pipes, etc.

• Special steel

Application range: car brake and clutch cylinders, engine cylinders of motorbikes, lawn mowers, outboard motors, hydraulic cylinders, ship engines and industrial motors, etc.

152.1090

600.0

30.0

16.0

2.10

Rotary angle disc

• For fastening screws at an angle

• Device for angle regulated fastening with a torque wrench

• Flexible arm

• Range 0° - 360°


• Optionally with a magnetic arm or claw arm

150.1695 18 pcs Electronic professional stethoscope 2.50

consists of:

150.1695-

1

150.1695-

2

150.1695-

3

150.1695-

4

150.1695-

5

150.1695-

6

Headset for 150.1695

Amplifier for 150.1695

Hand held stethoscope for 150.1695

Velcro strap for 150.1695, 8 pcs

Sensor for 150.1695

Coulour coded cable for 150.1695, 6 pcs

350

115

165

9

10

755

150.1181

150.1186

150.1191

150.1196

2 pcs

3 pcs

3 pcs

3 pcs

28.8

28.8

51.0

76.0

10

15

30

80

516.1195 1/2" 1/2" magnet 2° 67.0 63.0 480.0 170

516.1196 1/2" 1/2" claw 2° 67.0 63.0 538.0 60


Synchronous carburettor test device with 4 synchronous clocks

• For synchronous measurement on 2 – 4 carburettors with vacuum connection to the carburettor

• After adjustment and inspection of the valve clearances the carburettors should be synchronised

• Universal usage

• Unit for vacuum measurement: 0-70 cmHg / in0-30 inHg

• Generally necessary after a major inspection

• Optimum results for mechanical function-free engines

• Must be used with running engine

• Pressure gauges are fitted on the plate


Application range: Multi-cylinder engines require synchronous opening of the throttle valve Through tolerances in the intake system, adjustment of the throttle valve stop is not sufficient. Dynamic adjustment is required her. Through synchronisation, the same vacuum is reached before the carburettors.

A dial is required for each carburettor for synchronisation.

Adjustment of the individual compressors is done via the adjustment mechanisms.

150.1921

Manometer with tube, 10 bar

150.1922

90° Adaptor angled

150.1920-1 Screw adaptor no 1, R1/8”

150.1920-10 Screw adaptor no 10, M18 x 1.5

150.1920-2 Screw adaptor no 2, 1/8” x 27 NPT

150.1920-3 Screw adaptor no 3, 1/4” x 18 NPT

150.1920-4 Screw adaptor no 4, 3/8” x 20 UNF

150.1920-5 Screw adaptor no 5, 1/2” x 20 UNF





CO 2 Cylinder head leak testing set

24

33

23

27

594

44

23

34

24

24

29

33

• For the locating of leaks on combustion engines

• Rational and dependable finding of cracks and leakages

• Potential CO

2

content in the coolant solution is detected

• Ideally suited for the cylinder head, cylinder head seals and engine block

• Leakages are visible through discoloration of the test fluid

• For all current vehicles with water cooled engines (Gas,

Diesel and Petrol)

• Automatic regenerating reaction fluid for multiple use


3.00

consists of:

150.3601

150.3602

150.3603

150.3604

150.3605

150.3606

150.3607

X

4

Pressure gauge Ø 92 mm fitted on the plate

4 Rubber house 8 x 5 x 750 mm

4

Hose clamp with replacement sealing ring

1600

20

1

4 Connection piece 53 mm, M6 x 0.75 mm 8

4

Connection piece 60 mm, M6 x

1.0 mm

4 Extension 3.9 x 52 mm

12

8

4 Extension 3.9 x 122 mm 12

Oil pressure testing equipment

• Quick safe and problem free testing of the oil pressure on the engine

• incl. 10 adaptors

• Colour coding: Black= metric / silver = imperial

• Adaption with oil pressure sensor thread

• Manometer Ø 80 mm with rubber safety cover

• Flexible tube (L=1.3 m) with anti-kink device, decompression valve and quick coupling

• Robust execution


150.1910 8 pcs CO 2 Cylinder head leak testing set 1.43

consists of:

150.1911 Intake-squeeze bulb

150.1912 Two way brass valve

150.1915 Empty container, 250 ml (for required fluid)

150.1916 Bayonet Adaptor Gr 1

30

120

150.1913 Basic device with 2 Test chambers and cones 120

150.1914 Reaction fluid, 250 ml 250

30

60



80

110

150.1920 12 pcs Oil pressure testing equipment 1.89


1

5

Cylinder leak detector tester set

• For diagnosis of compression pressure loss

• Suitable for analysing inlet and outlet valves, piston rings or cylinder liner, cylinder head or head seal

• Better alternative for compression measurement

• Universal usage

• Integrated pressure reducer

• Necessary working pressure: 1.0 bar

• For use on engines at operating temperature


Test results:

Outlet valves not tight:

Air noises in exhaust, manifold and cylinder head on the outlet side

Inlet valves not tight:

Air noises in intake, on cylinder head on the inlet side

Piston rings, pistons, cylinder bore damaged:

Air noises on the crankcase breather or on the dipstick

Cylinder head seal defective:

Air noises in the adjacent cylinder, spark plug bore

Cylinder head seal defective or tear in cylinder head

Air noises or bubble formation in the cooling system or reservoir

6

7

8

9

10

11

12

13

2

3

4

14

15

16

17

150.1780 9 pcs Cylinder leak detector tester set

consists of:

2.30

150.1782 Hose 14/18 mm

150.1783 House with adaptor

150.1784 Adapter M10 x 1.0 mm

150.1785 Adaptor M12 x 1.25 mm

150.1786 Adapter M14 x 1.25 mm

150.1787 Adapter M14 x 1.25 mm, long design

150.1788 Spark plug adapter M12 x 1.25 mm

150.1789 Spark plug adaptor M14 x 1.25 mm

570

132

108

280

310

330

550

251

255

20

21

22

18

19

23

24

25

26

227 i

27.03.2015 10:20:44

Compression pressure test instrument for diesel engines

• Complete test tool set with or without direct injection

• Compact adaptor pieces with quick couplings

• Includes extensive adaptor assortment

• Very flexible tube for hard to access places


Technical data:

Manometer:

Tube length:

Manometer gauge:

0,0-70,0 bar

355.0

bar, psi or KPA

2.56

consists of:

150.1680-

1

150.1680-

2

150.1680-

3

150.1680-

4

150.1680-

5

150.1680-

6

150.1680-

7

150.1680-

8

150.1680-

9

150.1680-

10

150.1680-

11

150.1680-

12

150.1680-

13

Manometer with tube

Glow plug adaptor, M10x1,25



Compression pressure test adaptor,

114mm

Compression pressure test adaptor,

M24x2

Compression pressure test adaptor

Glow Plug Adaptor M 10 x 1,25

Glow plug adaptor, M10x1

Compression pressure test adaptor

Replacement sealings and washers

Angle connecting piece

Clamp arch

Digital compression pressure test set for petrol engines

• For dry and wet compression tests

• Compact adaptor pieces with quick couplings

• Includes extensive adaptor assortment and analogue manometer (psi)

• Digital manometer with reading storage up to 12 cylinders

• By means of brass coupling the repair is possible on valve seals without dismantling of the cylinder head

• Very flexible tube for hard to access places


160

60

60

45

145

15

50

70

640

40

40

70

220

consists of:

150.1650-1 Manometer digital

150.1650-10 Replacement seals and valve assortment

150.1650-2 Manometer analogue

150.1650-3 Adaptor tube M18 x 1,5

150.1650-4 Adaptor tube M14 x 1,25 long

150.1650-5 Adaptor tube M14 x 1,25 short

150.1650-6 Adaptor bush L=64 mm, M18 x 1.5

150.1650-7 Adaptor bush L=42 mm, M12 x 1.25

150.1650-8 Adaptor bush L=42 mm, M10 x 1,0

150.1650-9 Coupling 1/4’’ IG

40

40

80

420

5

120

100

90

110

105

Master fuel injection system pressure test set for petrol engines

• Ideal for quick and reliable pressure testing on all common injection systems of petrol engines

• For simple testing of fuel pumps, system pressure sensors and tightness

• Suitable for mechanical and electrical petrol injection systems

• For almost all common, European, Asian and American vehicle types

• Includes shock-proof, large precision manometer Ø 100.00 mm, 0 - 10 bar with rubber cover

• Includes shock-proof, small precision manometer Ø 75.00 mm, 0 - 1 bar especially for the central injection with rubber cover

• Compact quick couplings to all adapters and hoses

• Replacement washers (20 pieces) are available in the set


Application range / injection systems: Bosch K-Jetronic,

Bosch L/LH-Jetronic, Bosch Motronic, Bosch Motronic-

Jetronic, MPFI, TBI, Eci, MPi, EFI, EGI, PGM-Fi, DIGIFANT

1/2, CIS-Digital, Weber CFI, Spi, Singlepoint, Multipoint, Multec

SPi, EFI, Simtec EFI, 1-Tec, Magent Marelli G5/G6 Mono,

Weber-Marelli 1AW, CFI, Volkswagen 1AW, R Electronc etc.

consists of:

X

150.2344

150.2345

150.2346

150.2347

150.2348

150.2349

150.2360

150.2361

150.2362

150.2363

150.2364

150.2365

150.2366

150.2367

150.2368

150.2369

150.2650

150.2651

150.2652

150.2653

150.2654

150.2655

150.2656

150.2657

150.2658

150.2659

150.2661

1 GC

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

AE

AB

AA

AI

AJ

G

W

F

C

D

E

X

XA

2 AM

2

1

1

1 AG

1

1

1

1

1

1

HO

HN

AK

AL

AC

HA

HE

HR

HQ

HP

Connection adapter piece

M14x1.5 external thread and 16 mm hexagon with sealant ring

Adapter piece (long) M8x1.0 external thread and 1/4" hose connection with sealant ring

Dual adapter piece M16x1.5 internal and external thread and

3/8" hose connection

Dual adapter piece M14x1.5 internal and external thread and

3/8" hose connection

Adapter piece M10x1.0 external thread and 1/4" hose connection with sealant ring

Adapter piece M10x1.0 internal thread and 1/4" hose connection

Hollow bolt M8x1.0 and 1/4" hose connection


Manometer connection hose with 1/4" hose connection with valve for Bosch CSI and GM

TBI systems

Manometer connection hose with 1/4" hose connection for

Ford EFI systems

Manometer connection hose with 1/4" hose connection for universal use with 3/8" and

5/16" high-pressure hose connections

Adapter hose for small

Schrader valve 5/16"x32 UNF internal thread and 1/4" hose connection

Manometer connection hose with 1/4" hose connection including pressure release valve, transparent hose

Adapter hose for standard

Schrader valve

7/16"x20 UNF internal thread and 1/4" hose connection

Manometer 5/16" quick coupling connection hose with

1/4" hose connection for Ford

EFI systems

Manometer 5/16" quick coupling connecting hose with

1/4" hose connection for GM

TBI systems




Dual adapter piece

M14x1.25 internal and external thread and 1/4" hose connection

Adapter piece (long) M8x1.0 internal thread and 1/4" hose connection

Adapter piece (long) for

1/4", 3/8", 1/2" hoses and 1/4" hose connection





Replacement sealant ring packet 20 Pieces

37

70

65

65

35

21

22

19

110

324

160

95

110

116

40

55

13

24

22

63

64

51

28

38

33

29

10

2.20

4.00

consists of:

X

150.2326

150.2327

150.2328

150.2329

150.2340

150.2341

150.2342

150.2343

1

1

A

B

2 GA

2

1 GS

2

GT

GV

2 GU

2 GB

Manometer Ø 100.0 mm, 0 - 10 bar with 1/4" quick coupling

Manometer Ø 75.0 mm,

0 - 1 bar with 1/4" quick coupling



Double-sided adapter piece

5/8"x18 internal thread

Adapter piece 5/8"x1.8 external thread and 1/4" hose connection



360

202

41

39

28

26

48

39


THE BIGGEST SELECTION OF RATCHET-

WRENCHES IN THE WORLD!

PERFECT TECHNOLOGY – THE AS YET UNEQUALLED

“INVENTOR OF THE RATCHET WRENCH”

WITH OVER

10,000,000

SATISFIED CUSTOMERS

Inno vati ve r atche t tec hnolo gy fr om 5

.5 mm t o 41

.00 mm

!


Innovation is

our mission!

27.03.2015 10:20:52

cylinder head / engine block

Innovation is

our mission!

PAGE

TOOLS FOR ENGINE BLOCK SCREWS 208 - 209

TOOLS FOR CYLINDER BLOCK SCREWS 209 - 212

VIBRATION DAMPER TOOLS 213

SERVICE STANDS AND PARTS STATIONS

SLIDE RAIL BOLTS EXTRACTION TOOLS

213

213

GUIDE SLEEVES INTERNAL EXTRACTOR 213

EXTRACTION TOOL AND SPIRAL PROFILE SOCKETS 213 - 216

NUT SPLITTER 216 - 217

THREAD BORING TOOL AND BORE JIGS 217

CRANK SHAFT FACING TOOLS

VALVE GAUGES

VALVE PNEUMATIC ADAPTER

218

218

218

VALVE RETAINER AND VALVE SPRING TENSIONER 218 - 220

VALVE SHALT SEALING TOOLS 220 - 221

GASKET SCRAPER 221 - 222

SEALING RING TOOLS 222 - 223

VALVE SEAT CUTTER

VALVE CUTTER

224

224

VALVE WEDGE ASSEMBLY 224

VALVE ADJUSTMENT TOOLS 224 - 225

PISTON RING TOOLS

CYLINDER LINER TOOLS

225

225

CYLINDER HON DEVICES 226

TEST AND MEASURING TOOLS 226 - 228

TOOLS FOR ENGINE BLOCK SCREWS

TOOLS FOR CYLINDER BLOCK SCREWS

VIBRATION DAMPER TOOLS SERVICE STANDS AND PARTS STATIONS

SLIDE RAIL BOLTS EXTRACTION TOOLS

GUIDE SLEEVES INTERNAL EXTRACTOR

EXTRACTION TOOL AND SPIRAL PROFILE SOCKETS

NUT SPLITTER

THREAD BORING TOOL AND BORE JIGS

CRANK SHAFT FACING TOOLS

VALVE RETAINER AND VALVE SPRING TENSIONER

VALVE GAUGES

VALVE PNEUMATIC ADAPTER

VALVE SHALT SEALING TOOLS

GASKET SCRAPER

SEALING RING TOOLS

VALVE SEAT CUTTER

VALVE WEDGE ASSEMBLY

VALVE CUTTER

VALVE ADJUSTMENT TOOLS

PISTON RING TOOLS

CYLINDER LINER TOOLS

CYLINDER HON DEVICES TEST AND MEASURING TOOLS

THE BIGGEST SELECTION OF RATCHET-

WRENCHES IN THE WORLD!

PERFECT TECHNOLOGY – THE AS YET UNEQUALLED

“INVENTOR OF THE RATCHET WRENCH”

WITH OVER

SATISFIED CUSTOMERS

Inno vati ve r atche t tec hnolo gy fr om 5

.5 mm t o 41

.00 mm

!

Innovation is

our mission!

Related manuals

GYS

SET OF 25 INSULATED TOOLS 1000V

Baumer

Hexagon wrench 3 mm

Amazonia

THD VIC_2VALSIDE BR

Amazonia

SC SUMBENCH_2SUMBARM_INTAN_GILLICOF