Elo TouchSystems 17A2 Quick Installation Manual For Wireless Card


Add to my manuals
1 Pages

advertisement

Elo TouchSystems 17A2 Quick Installation Manual For Wireless Card | Manualzz

17A2

DVD/CD

1 2 3 4

Turn off power to the touchcomputer and unplug the power adapter from the unit.

Carefully place the touchcomputer facedown on a soft, flat surface.

Turn touchcomputer upside down and take off the back cover insert.

If there is an installed DVD drive, remove the two screws attaching the DVD drive flap and remove the flap. Then pull on the DVD drive so it slides out of the touchcomputer.

Unscrew the shielding that is connected by four screws and remove it.

5

Unscrew the security screw and remove the MiniPCI cover.

6 7 8 9 10

Align the pins of the Wireless card with the connector at an angle and push it in until the pins are in place.

Then push the Wireless card down until it clicks. If the two side locks on the connector do not click into place, remove the card and repeat the installation until the card clicks securely in place.

Take the cable labeled “Wireless card” and connect it to the connector labeled “MAIN” on the Wireless card.

Reinstall the MiniPCI cover with the security screw and reinstall the shielding with the four screws.

If the DVD drive flap was previously removed, reinstall the flap with the two screws and reinsert the DVD drive, verifying that the drive locks securely in place.

Replace the back cover insert.

15A2

11

Reconnect the power adapter and power on the touchcomputer.

Insert the software CD into the

DVD drive (or USB DVD drive) and follow the on-screen instructions to complete the Wireless Card software installation.

Installing the Wireless card for the 17A2/15A2

Note: This wireless card is intended to be used only with a 17A2 or

15A2 touchcomputer. Elo Touchsystems is not liable for any damages incurred while using this device in any non-specified manner.

North America

Elo TouchSystems

301 Constitution Drive,

Menlo Park, CA 94025 www.elotouch.com

Elo Technical Support

Online self-help

: www.elotouch.com/go/websupport

Technical Support contacts in your region: www.elotouch.com/go/contactsupport

Europe

Tel +32 (0)16 35 21 00

Fax +32 (0)16 35 21 01 [email protected]

Revision B

P/N E247787

Asia-Pacific

Tel +81 (45) 478-2161

Fax +81 (45) 478-2180 www.tps.co.jp

Latin America

Tel 1-305-428-5210

Fax 1-305-717-4909 www.elotouch.com.ar

For current Elo news, product updates and announcements, register to receive our TouchMonitor newsletter at www.elotouch.com/go/news

1 2 3

Turn off power to the touchcomputer and unplug the power adapter from the unit.

Carefully place the touchcomputer facedown on a soft, flat surface.

Turn touchcomputer upside down and take off the back cover insert.

Unscrew the shielding that is connected by six screws and remove it.

(A)

(B)

4

Remove the existing hard drive.

(A)

(B)

5 6 7 8

Align the pins of the Wireless card with the connector at an angle and push it in until the pins are in place.

Then push the Wireless card down until it clicks. If the two side locks on the connector do not click into place, remove the card and repeat the installation until the card clicks securely in place.

Take the cable labeled “Wireless card” and connect it to the connector labeled “MAIN” on the Wireless card.

Replace the hard drive into the hard drive space. Push the hard drive up until it snap locks into the connector.

Reinstall the shielding with the six screws.

9

Replace the back cover insert.

DVD/CD

10

Reconnect the power adapter and power on the touchcomputer.

Insert the software CD into the

DVD drive (or USB DVD drive) and follow the on-screen instructions to complete the Wireless Card software installation.

821107901201

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement