PAG Catalogue 2005
visit www.paguk.com for more information
TM
Professional Broadcast Equipment
Product Catalogue 2005
ADVANCED BATTERY SYSTEMS
visit www.paguk.com for more information
The choice of
professionals
worldwide
Pioneers
PAG’s design and manufacturing origins lie in the
film industry, developing film production and postproduction equipment. During the 1980s the
increasing demand for portable power led the
company into the Broadcast Television arena,
powering the first so-called portable electronic
cameras.
Quality
From the very beginning, PAG set out to create
the premier product for the market. Safety,
reliability and durability are the prime concerns
at all stages of a product’s development. The
company is accredited with ISO 9001:2000;
when you buy a PAG product you can be
assured that it has achieved a quality standard
that is second to none.
SKY NEWS, AFGHANISTAN
KARL LEAR, USA
Innovation
PAG has always maintained its own Research &
Development facility for which it is renowned.
This has enabled the company to develop the
world-leading technology that is embodied
throughout its product range today. PAG ACS
is the only super-fast-charging system that
extends, rather than reduces battery life.
GEOFF MACKLEY, MOUNT ETNA
SKY NEWS, BAGHDAD
System RTI is the only accurate in-the-viewfinder
run-time display, that counts down in hours,
minutes and seconds. PAG Time Batteries are
The PAG Quality Guarantee
and Product Support Service
PAG products have earned a reputation
throughout the world for excellence.
A reputation based upon quality,
reliability and performance.
Using PAG’s Authorised Service Centres is
the only way to ensure the continuation of
the quality standard for which you first
chose PAG products.
The PAG Warranty* reinforces this
reputation by assuring you, the customer,
not only of the quality and performance of
the product, but also of full service support
during the product’s lifetime.
For servicing outside the UK visit the PAG
website at www.paguk.com to discover
your nearest PAG Agent.
Contact the PAG Service Department in the
UK by e-mail: [email protected], or by
telephone: +44 (0) 20 8543 3131.
PAG maintains a worldwide network of
Authorised Service Centres, for the service
and repair of PAG products. These facilities
*The Warranty period is 18 months, with the
have a wealth of specialist knowledge, which exception of chargers and Paglights (2 years),
is the result of PAG’s 35 years of experience. and NPX1, PP240, and NMH60 batteries (1 year).
the only batteries with an accurate built-in power
and time display. Paglight is the only fullyfocusing, halogen or arc camera light. It is the
coolest-running and most versatile light in the
industry.
Excellence
World-leading technology, attention to detail in
both function and appearance and product
support that is second to none: these are the
PAG hallmarks of excellence. PAG products are
available via a worldwide network of companies
and agents as well as our on-line sales service
www.pagstore.com
1
ADVANCED BATTERY SYSTEMS
visit www.paguk.com for more information
PAGlok System
9657 Digital
Battery Reader
These All-Chemistry chargers
incorporate mating PAGlok
connectors suitable for
charging all PAGlok batteries.
Batteries of other reputable
manufacturers can also be
charged via the front PP90
sockets and the appropriate
charge adaptor.
Run-Time Information
The Digital System
RTI PAGlok connector
has a Softstart feature
for use with the Paglight
Paglight
9799/System RTI
PAGlok
Connector
9387 C50
Digital Cobalt
9354 Digital
System RTI
9357 Digital
SuperPack
9792 AR124PLD
9374
NMH60
Time Battery
9382
L95 Time
Battery
9375
NMH100
Time Battery
9522/PAGlok
Connector
01:24:36
9752 QUASAR/PSU
9726 QUASAR
9335
L95 Power
Circle Battery
9551
PAGlok Power
Plate, dual
battery mount for
use with L95 and
NMH60 PAGlok
batteries
Run-Time Information
PAG Digital System RTI Batteries provide
a countdown of remaining
run-time in the camera viewfinder,
in hours minutes and seconds.
9386
C50
Cobalt
9333
SuperPack
9791 PAGlok
Power Supply
9370
NMH100
SuperPack
Non-RTI batteries may
be used with the RTI
PAGlok connector but
the viewfinder display
will not be available
9613 Freelancer
PAG V-Mount Compatible System
PAG V-Mount batteries can be
charged via the PP90 sockets of
PAG All-Chemistry chargers using
charge adaptor Model 9617.
9553 PAG Power Plate
dual battery mount for
use with PAGlok batteries
V-Mount
9522/58 &
9360 L95 Time
9522/64
Battery
Adapt the
V-Mount for
use with PAGlok
batteries
9335V L95
Power Circle
Battery
PAG Snap-on Compatible System
Paglight is available with a
power base that is terminated
with a Snap-on compatible
connector.
9792 AR124PLD
These All-Chemistry PAG chargers incorporate
patented sliding Snap-on compatible connectors,
suitable for charging PAG Li-Ion and Anton-Bauer
batteries (not Dionic).
9518 Adapts
Snap-on mount
for use with
PAGlok batteries
9795 PULSAR
AntonBauer
Mount
9727 QUASAR
9383 L95
Time Battery
9335A
L95 Power
Circle Battery
9753 QUASAR/PSU
9552 PAG Power Plate
dual battery mount for
use with PAGlok batteries
‘Snap-on’ and ‘Anton-Bauer Mount’ refers to
Anton-Bauer connector U.S.Patent 4,218,107.
9617 V-Mount
Charge Adaptor
9798
Power Supply
PAGlok and V-Mount batteries
can also be charged via the
front PP90 sockets with the
appropriate charge adaptor.
2
BATTERIES
visit www.paguk.com for more information
PAG batteries
provide
unparalleled
technology,
performance
and safety
The value of quality
PAG batteries are designed
scientifically to provide a safe,
reliable power source for most
professional video requirements.
They are manufactured to withstand the strains and stresses of
use in the harshest environments,
and to perform consistently over
their natural lifetime.
PAG uses only the highest quality
components in the construction of
its products. Safety, reliability, and
durability are the prime concerns,
from conception to final assembly.
◗ PAG uses premium grade cells
which have been extensively
tested to ensure excellent cycle
life and capacity.
◗ The low-resistance inter-cell
nickel strapping and cell layout
are constructed to optimize
current sharing, reducing one
of the common causes of cellimbalance.
◗ High-impact, injection-moulded
polycarbonate, or medium
impact ABS cases incorporate
integral cradles for protection of
the cell-pack.
The original &
most accurate
built-in battery
run-time display
3
◗ PAG battery cases embody
non-slip design features for
secure handling.
◗ The internal circuits of PAG
Li-Ion batteries are coated
with Parylene, the premier
conformal coating, to protect
circuits against the results of
severe mechanical abuse to
the cell pack. From a safety
viewpoint PAG believes this
coating to be an essential
additional level of protection,
and yet other manufacturers
fail to address this.
◗ PAG Li-Ion batteries have a
higher safety standard than
those of other manufacturers.
They are protected against:
over and under voltage, over
current (charge and discharge),
over and under temperature,
and inappropriate charge
sources. Each protection feature
has a back-up.
◗ PAG L95 Li-Ion batteries have
built-in RF resistance and are
therefore less likely to shut-down
in the field than competitors
batteries, when used in close
proximity to radio transceivers.
◗ The key to extended battery life
lies in the charging. PAG
chargers and battery management systems are the most
advanced available. The PAG
ACS software that controls the
charging process was developed by PAG after years of
extensive research, and
continues to evolve as new
battery chemistries become
available. To ensure optimum
cycle life PAG batteries should
always be charged with the
appropriate PAG ACS charger
(see Chargers, Page 9).
◗ PAG batteries are available
in a variety of sizes, voltages,
capacities and cell-chemistries.
They are the most technologically advanced in the
industry, incorporating many
unique, proprietary features
designed to assist the
cameraman, including the
industry’s most accurate
capacity indication and run-time
display (see Power & Time
Display below, and PAG Digital
System RTI on Page 7).
PAG Time Batteries incorporate
the PAG Power & Time Display.
This built-in capacity indication
and run-time display, unique to
PAG, provides an accurate
prediction of equipment run-time
on-load, that counts down in 1
minute increments.
At the press of a button the PAG Power & Time Display
shows run-time against load...
The battery’s internal processor
achieves this taking into account
the changes of load that occur
during use, the charge status and
condition of the cells, and the
ambient temperature. PAG’s
display is the first to achieve this.
No other capacity indication
device displays equipment runtime this accurately.
...in hours...
...in ampere-hours
...followed by percentage.
The Power & Time Display uses an
easy-to-read digital character
format, and displays remaining
run-time on-load, at the press of a
button; hours are displayed first,
followed by minutes. The next
button press shows available
capacity in Ah (0.1Ah increments)
and a further press shows capacity
as a percentage (1% increments).
Capacity indication in amperehours and percentage can be
displayed when the battery is
on-load and when it has been
removed, providing accurate
charge status at all times.
The Run-time information can be
displayed in the camera viewfinder, when the Time Battery is
used in conjunction with the PAG
Digital System RTI battery mount
(see Page 7).
...followed by minutes.
Available capacity is also displayed...
BATTERIES
visit www.paguk.com for more information
One battery, all systems
PAGlok compatible
Model 9382
V-Mount compatible
Model 9360
The PAG L95
Time Battery is
the industry’s
most advanced
battery
Snap-on compatible
Model 9383
L95 Time Battery
The PAG L95 Li-Ion Time Battery
combines power, accuracy and
reliability, making it the industry’s
most advanced battery.
Available in three formats, the L95
Time Battery is compatible with all
popular camera systems.
The L95 Time Battery is a 14.8V
6.5Ah pack that provides a
capacity of 95 watt-hours and
weighs only 745g. This means
increased run-time for both a
camera and a 35W camera light.
Two L95s provide enough power
for a days shooting, and are small
and light enough to be stowed
easily in your camera bag.
The PAG L95 incorporates the
Power & Time Display which
provides a run-time prediction,
on-load, in hours and minutes
(see opposite). This accurate
calculation can be displayed in the
viewfinder with PAG Digital System
RTI (see Page 7).
PAG Li-Ion batteries contain no
less than 9 safety mechanisms,
making them the safest batteries
in the industry (see ‘The value of
quality’ opposite).
The high capacity PAG L95
complies with current air transportation regulations (certification is
provided).
PAG L95 Time Battery:
A high/low charge facility within
the battery, unique to PAG,
provides a choice between
extended cycle life or high
capacity, when charged with
PAG all-chemistry chargers.
Model 9382 PAGlok compatible
version: Provides run-time in the
viewfinder with PAG Digital System
RTI, and features PAG’s unique
high/low charge facility.
Model 9360 V-Mount compatible
version: Provides charge status in
the viewfinder of Sony cameras.
Can be charged with PAG allchemistry chargers via adaptor
Model 9617, or with the
appropriate Sony charger.
Model 9383 Snap-on compatible
version: Requires all-chemistry
PAG charger and features PAG’s
high/low charge facility.
See Page 5 for weights and
dimensions.
High quality, lower-cost Li-Ion
indication provided by the PAG
Power & Time Display (see L95
Time Battery above).
and Snap-on compatible Model
9335A, making it suitable for use
with all popular camera systems.
The PAG Power Circle display is a
micro-driven coulemetric capacity
indicator, that displays available
capacity in terms of percentage.
The push-button display uses four
segments to indicate the charge
status of the battery.
L95 Power Circle Batteries
incorporate the same cell-pack,
cycle life, build-quality and safety
features as the digital L95 Time
Battery, the industry’s most
advanced battery, and yet they
provide significant cost savings.
L95 Power Circle Battery
The cost of switching to a Li-Ion
battery system can be significant.
For this reason PAG has introduced
the L95 Power Circle Battery as a
high-quality, lower-cost non-digital
Li-Ion option. It is ideal for those
who require the benefits of Li-Ion
but not the highly accurate status
PAG Power Circle Display.
The PAG L95 Power Circle Battery
is available in three models:
PAGlok compatible Model 9335,
V-Mount compatible Model 9335V,
L95 Power Circle Batteries can be
charged with PAG all-chemistry
chargers. The new PAG
Freelancer charger has been
designed as a complementary
high quality, lower-cost charger,
ideal for use with the PAG L95
Power Circle Battery (PAGlok
version).
Model 9335 PAGlok version.
Model 9335V V-Mount
compatible version:
Charge adaptor Model 9617 is
required to charge this model via
the PP90 sockets of PAG allchemistry chargers. This model
can also be charged via the
appropriate Sony charger.
Model 9335A Snap-on
compatible version:
PAG all-chemistry chargers are
available that incorporate the
mating Snap-on compatible
connectors for this battery
(see Page 9).
See Page 5 for weights and
dimensions.
4
BATTERIES
visit www.paguk.com for more information
PAG NMH
batteries are
the only Ni-MH
batteries with
an accurate
Power & Time
display
NMH100 SuperPack
NMH60 Time Battery
A high performance Ni-MH
battery with a nominal capacity
of 7.5Ah, providing 100 watthours, ideal for powering high
definition cameras and on-board
lighting simultaneously.
This non-digital version of the
NMH100 provides significant
cost-savings in comparison with
the NMH100 Time Battery, and yet
provides the same capacity and
high-current draw capabilities.
One of the greatest advantages
over competitors’ batteries is the
PAG Power & Time Display,
which provides a run-time
prediction, on-load, expressed
in hours and minutes. This can
be displayed in the viewfinder
with System RTI (see Page 7).
The NMH100 SuperPack
incorporates a manual ‘Charged/
Used’ indicator.
The PAG NMH60 is the original
Time Battery. It incorporates the
PAG Power & Time Display
which provides a run-time
prediction, on-load, in hours
and minutes. This information
can be displayed in the
viewfinder with PAG Digital
System RTI (see Page 7).
NMH100 Time Battery
13.2V 7.5Ah 100Wh
208 x 126 x 44mm / 2.2kg
Model 9370
This Ni-MH battery is compact,
and lightweight, making it ideal
for powering smaller digital
camcorders.
14.4V 3.6Ah
130 x 86 x 42mm / 0.88kg
Model 9374
The PAG NMH100 Time Battery
weighs little more than a 5Ah
Ni-Cd and yet provides almost
50% more capacity.
13.2V 7.5Ah 100Wh
208 x 126 x 44mm / 2.2kg
Model 9375
No:
Name:
Cells:
V/Ah:
Size:
Weight:
Charger Compatibility:
9382
L95 Time Battery
Li-Ion
14.8V 6.5Ah
130 x 86 x 42mm
0.75kg
All-Chemistry
Capacity Indication:
System RTI / Power & Time Display
9335
L95 Power Circle Battery
Li-Ion
14.8V 6.5Ah
130 x 86 x 42mm
0.75kg
All-Chemistry
Power Circle Display
9375
NMH100 Time Battery
Ni-MH
13.2V 7.5Ah
208 x 126 x 44mm
2.20kg
Any PAG ACS Charger
System RTI / Power & Time Display
9370
NMH100 SuperPack
Ni-MH
13.2V 7.5Ah
208 x 126 x 44mm
2.20kg
Any PAG ACS Charger
Charged/Used Indicator
9374
NMH60 Time Battery
Ni-MH
14.4V 3.6Ah
130 x 86 x 42mm
0.88kg
Any PAG NMH Charger
System RTI / Power & Time Display
9354
RTI SuperPack
Ni-Cd
13.2V 5.0Ah
208 x 126 x 44mm
1.95kg
Any PAG ACS Charger
System RTI / Battery Reader
9387
C50 Digital Cobalt
Ni-Cd
14.4V 50Wh
162 x 105 x 31mm
1.20kg
Any PAG ACS Charger
System RTI / Battery Reader / LED Array
9357
Digital SuperPack
Ni-Cd
13.2V 5.0Ah
208 x 126 x 44mm
1.95kg
Any PAG ACS Charger
System RTI / Battery Reader
9329
SuperPack
Ni-Cd
12.0V 5.0Ah
208 x 126 x 44mm
1.80kg
Any PAG ACS Charger
Charged/Used Indicator
9333
SuperPack
Ni-Cd
13.2V 5.0Ah
208 x 126 x 44mm
1.95kg
Any PAG ACS Charger
Charged/Used Indicator
9344
SuperPack
Ni-Cd
14.4V 5.0Ah
208 x 126 x 44mm
2.10kg
Any PAG ACS Charger
Charged/Used Indicator
9386
C50 Cobalt
Ni-Cd
14.4V 50Wh
162 x 105 x 31mm
1.20kg
Any PAG ACS Charger
LED Array
9398
Brick Battery
Ni-Cd
13.2V 5.0Ah
135 x 110 x 93mm
2.00kg
Any PAG ACS Charger
Charged/Used Indicator
PAG V-Mount Compatible Batteries
9360
L95 Time Battery
Li-Ion
14.8V 6.5Ah
130 x 86 x 47mm
0.75kg
All-Chemistry
Power & Time Display
9335V L95 Power Circle Battery
Li-Ion
14.8V 6.5Ah
130 x 86 x 47mm
0.75kg
All-Chemistry
Power Circle Display
PAG Snap-on Compatible Batteries
9383
L95 Time Battery
Li-Ion
14.8V 6.5Ah
130 x 86 x 52mm
0.76kg
All-Chemistry
Power & Time Display
9335A L95 Power Circle Battery
Li-Ion
14.8V 6.5Ah
130 x 86 x 52mm
0.76kg
All-Chemistry
Power Circle Display
5
BATTERIES
visit www.paguk.com for more information
PAG Ni-Cd
batteries
provide a
robust power
source
suitable for
extreme
environments
RTI SuperPack
A 13.2V 5Ah Ni-Cd Digital
SuperPack that provides a runtime prediction, in hours and
minutes, displayed in the
viewfinder with System RTI
(see Page 7).
13.2V 5Ah
208 x 126 x 44mm / 1.95kg
Model 9354
Digital SuperPack
A 13.2V 5Ah Ni-Cd Digital
SuperPack that displays
remaining available capacity,
in Ah, with the Digital Battery
Reader, and a countdown, in 5%
increments, in the viewfinder with
System RTI (see Page 7).
13.2V 5Ah
208 x 126 x 44mm / 1.95kg
Model 9357
C50 Digital Cobalt
A digital 50 watt-hour battery
with Cobalt Power cells. Features
all the benefits of a Ni-Cd with
increased capacity in a compact
package.
Provides a run-time prediction in
the viewfinder with System RTI
(see Page 7). Incorporates an
electronic state-of-charge
indicator.
14.4V 50Wh
162 x 105 x 31mm / 1.2kg
Model 9387
SuperPack
C50 Cobalt
Non-digital Ni-Cd batteries that
incorporate a manual ‘Charged/
Used’ indicator.
208 x 126 x 44mm
12V 5Ah
1.80kg
Model 9329
14.4V 5Ah
2.1kg
Model 9344
13.2V 5Ah
1.95kg
Model 9333
A non-digital 50 watt-hour battery
with Cobalt Power cells. Features
all the benefits of a Ni-Cd with
increased capacity in a compact
package.
Brick-Type Battery
Non-digital 5Ah Ni-Cd battery.
13.2V 5Ah
135 x 110x 93mm / 2kg
Model 9398
Incorporates an electronic state-ofcharge indicator.
14.4V 50Wh
162 x 105 x 31mm / 1.2kg
Model 9386
6
PAGLOK SYSTEM
visit www.paguk.com for more information
Digital System RTI
The PAGlok
Connector
provides
compatibility
with a system
of power
related
products
PAGlok Connector
PAGlok Accessories
PAGlok to Snap-on Adaptor.
Adapts the PAGlok connector for
use with Snap-on compatible
batteries.
Model 9517
PAGlok connector to XLR-4 (M).
Allows cameras fitted with the
PAGlok connector to be powered
from a Pagbelt.
Model 9524
The PAGlok system comprises two
halves; one is fitted to the camera,
the other is part of the battery.
When both halves are locked
together they form a secure
mechanical and electrical
connection.
Features of the PAGlok connector
include a PP90 socket for the
camera light.
Model 9522/-
PAGLOK CONNECTOR FOR
SONY V MOUNT
Snap-on Kit.
Adapts the PAGlok connector for
use with Snap-on compatible
batteries. (Wide Kit / Snap-on
connector not supplied).
Model 9678
Adapts Sony DSR 300/500
V-Mounts for use with PAG L95,
L75, NMH60, & C50 batteries.
Model 9522/58
Suitable for use with all Sony
V-Mounts and PAGlok batteries.
Model 9522/64
PAGLOK CONNECTOR FOR
ANTON-BAUER MOUNT
PAGlok Pagclip 90.
Enables a Master 90 battery to be
mounted directly to equipment fitted
with the PAGlok connector.
Model 9515
PAGlok Pagclip NP.
Enables a NP1 battery to be
mounted directly to equipment
fitted with the PAGlok connector.
Model 9516
See also Page 12, Charging Adaptors
7
PAG Digital System RTI is a
highly accurate Battery Status
Recognition and Run-Time
Information system for broadcast cameras. It is the first
digital battery system to display
camera run-time in the viewfinder with an accurate final
warning indication prior to
camera shutdown.
Instant and accurate battery
run-time information enables
you to maximise the power
available. This means taking
fewer batteries on location,
saving you money.
PAGlok/NP1 Adaptor.
Adapts the Sony NP1 box for use
with the PAGlok connector.
Model 9577
Snap-on Kit.
Adapts the PAGlok connector for
use with Snap-on compatible
batteries. (Narrow Kit / Snap-on
connector not supplied).
Model 9677
02:27:36
This model adapts Anton-Bauer
Snap-on camera mounts for use
with PAGlok batteries.
Model 9518
The PAG-developed microcomputer-technology is embodied
in the Digital System RTI
PAGlok Connector.
PAGlok batteries that are
compatible with System RTI
are available in a range of cellchemistries, voltages and
capacities. Connect a battery
and the charge status, in
ampere-hours, is instantly
displayed in the viewfinder.
When you enter ‘record’, the
system evaluates the energy
being consumed, and the
display shows available runtime expressed in hours,
minutes and seconds.
Any subsequent change of
load, such as the addition of
a camera light, is instantly
accommodated in the
information displayed.
RTI features a Softstart antisurge cold filament pre-warm
feature for the camera light,
which can be controlled
automatically from the camera’s
record function.
Aspects of the viewfinder
display can be determined by
the user via the system
configuration screens.
Digital System RTI
Includes PAGlok Connector with
On-Screen Display control port;
Softstart lamp power port, and
Viewfinder Interface Cable Set.
126 x 84 x 16mm / 110g
Model 9799/System RTI Upgrade
For PAG Ni-MH and Li-Ion
batteries (Ser. No. required).
Model 9681
Battery Reader
Accurately determines, and
instantly displays the charge
status, capacity and number of
cycles of any PAG digital
battery. Includes case, neck
cord, keyring and Battery
Reader Conversion Card, which
enables you to calculate
equipment run-time.
97 x 31 x 18mm / 25g
Model 9657
PAGLOK SYSTEM
visit www.paguk.com for more information
Radio Microphone
Receiver Holders
Power Plate
Designed for use with cameras
fitted with the PAGlok
connector (not included), to
enable the mounting of a radio
microphone receiver. In most
cases the holder is fitted
between the battery mount and
the camera whilst allowing the
routing of any fixed wires
through a central aperture.
Receivers are held on a left or
right side-facing plate, with
velcro straps. Kits which enable
the mounting of two receivers,
and kits for use with the
V-Mount to PAGlok adaptor
are also available.
The PAG Power Plate is a dual
battery mount available with a
choice of connectors suitable for
all popular camera systems.
The PAGlok Power Module is a
compact, lightweight unit designed
to supply continuous power from
two PAGlok batteries for editing
equipment, remote cameras or
microwave links.
It enables two L95-size PAGlok
batteries to be used in parallel,
providing combined capacity and
a higher current draw capability.
The weight of the Power Plate and
two L95 batteries combined is
similar to a Ni-Cd SuperPack
battery, but will provide 190 watthours, almost three times the
power. This is enough capacity to
power most camera and lighting
set-ups for a day.
Using two Li-Ion batteries to share
the load and achieve a larger,
combined capacity ensures that
you do not discharge the battery at
an excessive rate.
Power Module
Left side-facing Kit
Model 9620
PAGlok batteries of any chemistry,
capacity and state-of-charge can
be used. Output is via a XLR-4
socket.
A third power source, such as a
Pagbelt can be connected via the
XLR-4 input socket. Two Power
Modules can be linked to provide
seamless power from up to 5
power sources. Model 9663
features a regulated 7.2V output and
a carrying strap is provided with
each model.
Right side-facing Kit
Model 9621
The combined weight of the Power
Plate and two batteries is ideal for
those who require a counterbalance for the weight of the lens.
The Power Plate incorporates the
PAG Power Circle, a built-in
charge-status indicator that relates
to the batteries connected.
Dual Kit
Model 9622
PAGlok Power Plate
215 x 132 x 39mm / 386g
Model 9551
PAGlok Power Module
12 to 14.4V / 7.2V
135 x 115 x 55mm / 410g
Model 9663
Power Plate (Snap-on compatible)
215 x 132 x 40mm / 406g
Model 9552
Power Plate (V-Mount compatible)
215 x 132 x 55mm / 423g
Model 9553
PAGlok Power Module
12 to 14.4V
135 x 115 x 55mm / 410g
Model 9661
Kit for use with PAGlok to
V-Mount Connectors Models
9522/58 & 9522/64.
Model 9623
Connecting Lead
Model 9664
Power Supply
This compact and lightweight
Power Supply is designed to be
mounted directly to the back of a
camera fitted with the PAGlok
Connector. The unit has a fully
protected output of 50W, suitable
for powering most broadcast
cameras. It has a universal mains
input of 90V to 270V. The only
cable required is the standard IEC
power lead supplied with the unit.
PAGlok Power Supply.
160 x 105 x 42mm / 0.6kg
Model 9791
PAG Power Supply (Snap-on
compatible version).
Model 9798
Lok-on Power Module
This series/parallel unit can be used
to connect two PAGlok batteries in
series, to produce an output voltage
equal to the sumof the two batteries’
individual voltages, (up to 30V for
applications such as powering
lighting or microwave links).
Connecting the batteries in parallel
produces a capacity equal to the sum
of the two batteries’ individual
capacities (up to 14Ah, for extended
equipment run-time). This mode
provides continuous operation.
Output is via 1 x XLR-4 socket.
Model 9581
PAGlok Powerbelt
A belt-mounted series/parallel unit
for use with PAGlok batteries.
Output is via 1 x XLR-4 socket.
Model 9527
PAGlok Battery Carrying Belt
A convenient way of carrying two
PAGlok batteries to provide offcamera power for a range of
applications.
Model 9523
8
CHARGERS
visit www.paguk.com for more information
Chargers
PAG AR Series 2, Quasar & Pulsar charge PAG
Li-Ion, as well as Ni-Cd and Ni-MH batteries of any
reputable manufacturer, within the ranges 4.8V to
14.8V, and 1Ah to 10Ah.
PAG AR124PLD
Four-channel AR Series 2
Charger/Discharger
PAG AR Series 2 chargers are available with either PAGlok
connectors or NP1 pockets. The PAG Pulsar incorporates
Snap-on compatible connectors, incorporating Talk-Circuits,
which allow the charger to display data, recorded by PAG
digital Li-Ion batteries, such as date of manufacture, serial
number, Ah loaded, operating capacity, percentage stateof-charge, and battery temperature.
PAG QUASAR
Ultra-compact two-channel
charger (half the size of
the AR124PLD).
The Quasar is available
with either PAGlok
connectors or Snap-on
compatible connectors.
All chargers employ superior Sequential Charging
which fully charges one battery a lot quicker than a
simultaneous charger. Simultaneous charging distributes
current over two batteries at the same time, making the
process twice as long. PAG chargers are so efficient that
in many cases two batteries can be sequentially charged
faster than they can with simultaneous chargers of other
manufacturers.
All chargers are easy to operate.
Many have large backlit LCD
displays, providing battery
voltage and charge loaded
information.
The Quasar incorporates an optional Camera
Power Supply that provides a nominal 50W
suitable for powering most professional broadcast
cameras. In power supply mode the Quasar
displays an accurate digital bar-graph of power
consumption.
Quasar screen in power supply mode.
PAG ACS - ADVANCED
CHARGING SYSTEM
PAG chargers are the most
versatile and advanced
microcomputer-controlled battery
management systems in the
industry. The PAG ACS software
that controls the charging program
will extend the working life of your
batteries beyond anything that can
be achieved using other systems.
AUTOMATIC CHARGE-RATE
SELECTION
PAG acknowledges the wide
variety of batteries that are
available to the camera operator
in terms of cell-chemistry, voltage
9
and capacity, and has incorporated
revolutionary software in its
chargers that provides the
easiest and most efficient way
of managing them. Automatic
Charge-Rate Selection detects the
battery’s cell-chemistry, state-ofcharge, capacity and condition,
using only the battery’s negative
and positive terminals. The charger
then applies the correct regime to
achieve a fully charged battery
with the maximum capacity and
cycle life. The charge rate can be
set manually to 2A, 3A, 4A or Auto.
VARIETY OF FEATURES
The features of each PAG charging
All models are designed to high electrical standards,
with RFI certification, and are suitable for use in all
broadcast environments.
system vary to include 2 or 4
channels, a choice of battery
connector, Discharge/Charge
program, or a camera power supply.
DISCHARGER
Batteries which have been repeatedly subjected to partial discharge
will benefit from the analytic
Discharge/Charge cycle program
which measures and displays
available battery capacity.
RECOVERY CHARGE
The Recovery Charge Program can
be used to regain capacity lost as a
result of extended storage or
operation under adverse conditions.
An adaptive maintenance charge is
applied after full charge, if
necessary, to keep batteries in
peak condition and ready for
instant use.
LI-ION RECOVERY
PAG chargers incorporate a
program for PAG Li-Ion batteries
that will automatically recover the
battery when the output has been
shut down by the internal
protection circuit.
PAG charging systems automatically adjust to operate from
AC mains supplies worldwide.
CHARGERS
visit www.paguk.com for more information
PAG AR124PLD
The world’s
most advanced
battery
management
systems
PAG AR124NPD
PAG Pulsar
4 x NP1 pockets
4 x PP90 sockets
Discharger
Model 9793
4 x PAGlok connectors
4 x PP90 sockets
Discharger
Model 9792
PAG Quasar
4 x Snap-on compatible
4 x PP90 sockets
Discharger
Talk-Circuits
Model 9795
PAG Quasar
PAG Quasar
2 x PAGlok connectors
2 x PP90 sockets
Camera Power Supply
Model 9752
2 x PAGlok connectors
2 x PP90 sockets
Model 9726
2 x Snap-on compatible
2 x PP90 sockets
Camera Power Supply
Model 9753
PAG Quasar
2 x Snap-on compatible
2 x PP90 sockets
Model 9727
PAG Freelancer
The PAG Freelancer is a new,
ultra-compact, economical
2-channel charger. It has a
tough but lightweight moulded
construction that makes it an ideal
travel or back-up charger. It is only
slightly larger than a PAG L95
Li-Ion battery, and fits easily into
your camera bag.
2 x PAGlok connectors
(no PP90 sockets)
Charging Range: 12 to 14.8V,
1.5 to 10Ah
Model 9613
The all-chemistry PAG Freelancer
incorporates two full-sized PAGlok
connectors and will sequentially
charge all PAGlok batteries.
The charger incorporates PAG ACS
software which will extend the cycle
life of your batteries beyond
anything that can be achieved
using other systems.
A fully discharged 5Ah battery will
be fully-charged in approximately
3 hours 20 minutes.
After charging, the Freelancer may
apply a balancing charge, and a
maintenance charge to keep the
battery in peak condition.
The Freelancer incorporates a
program for PAG Li-Ion batteries
that will automatically recover the
battery when the output has been
No:
Name:
Connectors:
Size:
Weight: Special Features:
9792
PAG AR124PLD
4 x PAGlok connectors
82 x 168 x 240mm
1.23kg
9793
PAG AR124NPD
4 x NP1 pockets
78 x 142 x 240mm
1.07kg
Discharge
9795
PAG PULSAR
4 x Snap-on compatible
82 x 168 x 240mm
1.23kg
Discharge & Talk Circuits
Discharge
9752
PAG QUASAR
2 x PAGlok connectors
72 x 135 x 185mm
0.88kg
Power Supply
9753
PAG QUASAR
2 x Snap-on compatible
80 x 135 x 185mm
0.84kg
Power Supply
9726
PAG QUASAR
2 x PAGlok connectors
72 x 135 x 185mm
0.88kg
9727
PAG QUASAR
2 x Snap-on compatible
80 x 135 x 185mm
0.84kg
9613
PAG Freelancer
2 x PAGlok connectors
55 x 115 x 135mm
0.41kg
shut down by the internal
protection circuit.
The charger’s user interface
features a comprehensive LED
indication of battery and charger
status. The charger is fully
automatic in operation and
constantly monitors every
process.
The Freelancer can be powered
from AC mains supplies worldwide, or from a vehicle battery
with the PAG Vehicle Battery
Power Converter (Model 9774).
9670 PAG Li-Ion Chip-Upgrade
for AR Series 2 Chargers:
upgrades 9792, 9793 &
9794 (green labels) for use
with PAG Li-Ion batteries.
9673 PAG NMH Chip-Upgrade
for 12V AR Series Chargers:
upgrades 9767, 9768,
9769, 9772 & 9789 for use
with PAG NMH batteries.
10
CHARGERS
visit www.paguk.com for more information
The MC124 is capable of measuring battery performance and
recovering lost capacity.
12V Battery
Management
System
Features:
Fast-charge Program
Analytic Discharge Program
Revitalise Program
Recovery Charge Program
4 x PAGlok connectors
4 x PP90 sockets
Backlit LCD screen
Worldwide Operation
PAG MC124
PAG MC124 is a fast-charger and
battery management system,
which operates under the control of
PAG ACS.
PAG MC124 is suitable for PAG
NMH batteries and Ni-Cd batteries
of any manufacture, in the ranges
4.8V to 14.4V and 1Ah to 7Ah.
PAG MC124 incorporates a serial
port and is supplied with PAG CMS
Charger Management Software
to enable all programs to be
controlled from a PC (via
Windows 3.1, 95 or 98).
4 x PAGlok, 4 x PP90
160 x 294 x 170mm
2.7kg
Model 9785
PAG NMH Chip-Upgrade for
MC124: Upgrades 9785 for
use with PAG NMH batteries.
To receive this inexpensive
chip-upgrade, the MC124
must be returned to PAG Ltd.
PAG 30V
AR Series
Chargers
PAG AR301
PAG AR304
1 x XLR-4 (M)
Model 9763
There are PAG 30V AR Series models
suitable for military applications.
4 x XLR-4 (M)
Model 9765
No:
Name:
Connectors:
Size:
Weight:
Capacity
Charge Time*
9763
PAG AR301
1 x XLR-4 (M)
78 x 142 x 240mm
1.07kg
2Ah
0.5 hour
9765
PAG AR304
4 x XLR-4 (M)
78 x 142 x 240mm
1.07kg
4Ah
1.0 hour
6Ah
1.5 hours
7Ah
1.75 hours
8Ah
2.0 hours
10Ah
2.5 hours
The 30V range of PAG AR Series
chargers is optimised to fastcharge 24V to 30V Ni-Cd battery
belts or packs, of any manufacture,
via front XLR-4 sockets.
A 30V 7Ah battery will be fastcharged in less than two hours.
Overnight
Charger
The nominal charging range is far
greater, however, encompassing all
Ni-Cd batteries in the ranges 12V
to 30V, and 1.7Ah to 10Ah.
Features include Recovery Charge,
maintenance charge and worldwide operation.
The PAG OC124NP Overnight
Charger has been designed to
fulfil the needs of Ni-Cd users who
do not require a fast-charger.
This four-channel overnight
charger will slow-charge 12 to
14.4V, 1 to 7Ah Ni-Cd batteries of
any manufacture.
PAG OC124NP
4 x NP1, 4 x PP90
78 x 142 x 240mm
1.07kg
Model 9782
11
It is also suitable for charging
PAG NPH battery, (Model 9323).
The OC124NP incorporates 4 x NP
pockets and 4 x PP90 sockets.
*These times are approximate
only, and assume the battery is
fully discharged.
ADAPTORS
visit www.paguk.com for more information
Charging Adaptors
PAG charges a
far wider range
of batteries
NP1 Power
Adaptor
The NP1 Power Adaptor
utilises NP1 format batteries
for powering Radio
Microphone Receivers.
The unit incorporates
4 auxiliary switched
outputs, and over-current
protection.
NP1 pocket to SQN-4S
connector.
Model 9632
Vehicle Battery
Power Converter
This DC/DC Converter enables
you to power a PAG charger
from your vehicle’s battery via
the cigar lighter socket.
Suitable for use with the
following PAG chargers:
PAG AR Series 2.
PAG Pulsar.
PAG Quasar.
PAG Freelancer.
PAG 12V AR Series.
PAG MC124.
Pagbelt IC2 integral charger.
V-Mount Charge
Adaptor
111 x 60 x 30mm / 500g
Model 9774
Intelligent V-Mount
Charge Adaptor
Charge Adaptor for PAG V-Mount
compatible batteries, for charging
via the front PP90 sockets of PAG
AR Series 2, Pulsar and Quasar
chargers.
Charge Adaptor incorporating
circuits required for charging all
Sony Li-Ion batteries via the front
PP90 sockets of PAG all-chemistry
chargers.
76 x 50 x 25mm / 66g
Model 9617
76 x 50 x 25mm / 66g
Model 9610
12
NP1 & BP90 BATTERIES
visit www.paguk.com for more information
PAG NP1
Format
Batteries
PAG NP1 Batteries
The NP1 industry standard format
is suitable not just for powering
video cameras but also for audio
equipment, VCRs and monitors.
PAG offers you high-quality Ni-Cd
and Ni-MH versions of this popular
format. Both batteries can be fastcharged with PAG all-chemistry
chargers or slow-charged with the
OC124NP overnight charger
(see Pages 9 to 11).
The NP1 Power Adaptor utilises
NP1 format batteries for powering
Radio Microphone Receivers
(see Page 12).
PAG BP90
Format
Batteries
PAG NPH
A Ni-MH NP1 format battery
capable of supplying a continuous current of 10A, ideal for
powering camera and lighting
simultaneously. Features LED
state-of-charge indicator.
PAG NPX1
A 13.2V Ni-Cd NP1 format battery
with a capacity of 2.4Ah. Features
a Charged/Used Indicator.
13.2V 2.4Ah
71 x 184 x 25mm / 0.65kg
Model 9301
13.2V 2.2Ah
71 x 184 x 25mm / 0.74kg
Model 9323
PAG Master 90 Batteries
PAG Master 90 is a 12V 5Ah
Ni-Cd replacement for the Sony
BP90. PAG Master 90XT is a 13.2V
5Ah version.
Both batteries may be fastcharged with any PAG ACS
charger via the PP90 connector.
The PAGlok Pagclip 90 camera
mounting adaptor enables both
batteries to be used with the
PAGlok connector.
PAG Master 90XT
13.2V 5Ah
207 x 122 x 36mm / 2.1kg
Model 9343
Other
Formats
PAG PP240
A 12V 2.4Ah Ni-Cd battery
interchangeable with the
Panasonic AU-BP220 and
JVC NB-G1U.
The PAG PP240 may be fastcharged with 12V PAG ACS
chargers via the PP90 socket with
charge adaptor Model 9695.
12V 2.4Ah
103 x 80 x 43mm / 0.7kg
Model 9324
13
Steadicam Battery
A 13.2V 5Ah Ni-Cd battery for use
with Cinema Products Steadicam
Camera Support System.
The PAG Steadicam battery may
be fast-charged with 12V PAG ACS
chargers via the PP90 socket with
charge adaptor Model 9592.
13.2V 5Ah
218 x 64 x 64mm / 2.4kg
Model 9319
PAG Master 90
12V 5Ah
172 x 122 x 36mm / 1.6kg
Model 9391
POWERMAN / DC ADAPTORS
visit www.paguk.com for more information
PAG Powerman
12V to 30V
Lighting
Batteries
The PAG Powerman is a 7Ah
Ni-Cd battery pack designed to
provide a robust and reliable
source of power ideal for handheld location lighting.
Powerman is uniquely styled with
many original features. The outer
case is lightweight, tough and
designed for comfort in use, with
rounded corners and edges.
A detachable curved body pad is
available with adjustable waist belt
incorporating an anti-slip lock
feature. When used in conjunction
with the adjustable shoulder strap
it enables the Powerman to be
worn safely and comfortably.
Powerman incorporates an end-ofdischarge warning indicator and
Over Discharge Protection (ODP)
to prevent cell imbalance, the most
common cause of reduced battery
cycle life.
The 12V and 13.2V Powerman
models provide dual output via
2 x XLR-4 connectors.
Powerman batteries can be fastcharged with the appropriate PAG
PAG Powerman Batteries:
9339
12.0V 7Ah
2 x XLR-4 (F)
240 x 166 x 81mm
4.3kg
9338
13.2V 7Ah
2 x XLR-4 (F)
240 x 166 x 81mm
4.5kg
9342
24.0V 7Ah
1 x XLR-4 (F)
240 x 257 x 81mm
6.3kg
9330
30.0V 7Ah
1 x XLR-4 (F)
240 x 257 x 81mm
7.2kg
9353
Body Pad (not suitable for use with the 12V Powerman).
ACS fast-charger. PAG 30V AR
Series chargers are required
for 30V Powerman batteries
(see Page 11).
DC Adaptors
DC Adaptors
for 7.2V
Camcorders
Model
Camcorder
9680/01
Canon XL1
PP90
9680/02
Sony DSR 200
PP90
PAG has designed a range of DC
Adaptors for use with 7.2V
camcorders. The DC Adaptor
enables the camcorder to be
powered by 12V, 13.2V, 14.4V and
14.8V battery packs or belts.
9680/03
Sony PD150
PP90
9680/04
Panasonic AG-DVX100E
PP90
9655/01
Canon XL1
XLR-4
9655/02
Sony DSR 200
XLR-4
9655/03
Sony PD150
XLR-4
The DC Adaptor incorporates two
connectors, one suitable for the
battery port of the camcorder and
one for the chosen power
source.
9655/04
Panasonic AG-DVX100E
XLR-4
There are two input plug options:
The PP90 plug is suitable for
connection to the power port of a
PAGlok connector, enabling the
camcorder to be powered from any
12V to 14.8V PAGlok battery. It is
Connector
also possible to power a 12V
Paglight from the second power
port of the PAGlok connector
(Model 9522/60), which
incorporates a clip enabling it to
be worn on your waistband.
The XLR-4 (M) plug option can be
used for connection to a Pagbelt or
Powerman battery.
14
PAGBELT IC2
visit www.paguk.com for more information
12V to 30V
Battery Belts
with Integral
Chargers
Pagbelt IC2
For over 25 years Pagbelts have
been the battery belts against
which all others have been judged.
Fashioned from top quality, deep
moulded leather, Pagbelts have a
legendary reputation for quality
and craftsmanship.
QUALITY
Designed and built under a strictly
controlled quality assurance
system, using quality materials
and proven techniques, Pagbelts
are guaranteed to give a long and
effective service life even under
the most demanding conditions.
Pagbelt IC2 is the ideal power
source for PAG 250W 24V or 30V
lighting (see Page 23).
INTEGRAL CHARGER
Pagbelt IC2 incorporates a fully
isolated, integral overnight
charger, which is able to accept a
Widerange input supply, from 90V
to 250V AC, 50Hz-60Hz enabling
worldwide operation.
SUPERIOR CELLS
Pagbelts contain specially
selected cells of superior quality,
providing excellent run-time.
OVER-DISCHARGE PROTECTION
Pagbelts feature Over Discharge
Protection (ODP), an automatic low
voltage cut-out facility to prevent
cell imbalance, the most common
cause of reduced battery cycle
life.
Some Pagbelt models have been
assigned NATO stock numbers.
DUAL OUTPUT
All Pagbelts have two XLR-4 (F)
output connectors and a 10A selfresetting thermal cut-out to protect
the battery belt from accidental
short circuit.
Pagbelt IC2 is available in a range of voltages and capacities.
Model
Voltage
Capacity
Weight
9287
Pagbelt IC2
12V
5Ah
2.4kg
9288
Pagbelt IC2
13.2V
5Ah
2.5kg
* 9290
Pagbelt IC2
24V
5Ah
3.8kg
* 9291
Pagbelt IC2
30V
5Ah
4.9kg
9292
Pagbelt IC2
12V
7Ah
3.4kg
9293
Pagbelt IC2
13.2V
7Ah
3.6kg
9294
Pagbelt IC2
14.4V
7Ah
3.6kg
* 9295
Pagbelt IC2
24V
7Ah
5.0kg
* 9296
Pagbelt IC2
30V
7Ah
5.6kg
* 9297
Pagbelt IC2
12V
10Ah
4.9kg
* 9298
Pagbelt IC2
13.2V
10Ah
5.3kg
Pagbelt NMH
13.2V
7.5Ah
2.8kg
9368
* Comes with shoulder harness.
FULL SUPPORT
Pagbelts have a quick release
buckle and fully adjustable strap.
The heavier series of belts are
provided with a clip-on webbing
shoulder harness, providing added
support and comfort for the wearer
during periods of demanding
activity.
FAST-CHARGING
Pagbelts can be fast-charged with
the appropriate PAG ACS fastcharger. PAG 30V AR Series
chargers are required for
24V and 30V Pagbelts.
Unequivocal Guarantee:
10
Pagbelt IC2 has a variety of
industrial applications.
15
Pagbelt NMH 13.2V 7.5Ah (100Wh)
battery belt.
Pagbelt has dual XLR-4 output.
YEARS
PAG offers a ten year
guarantee on the
leather casework of
all Pagbelts.
18
MONTHS
There is also an eighteen
month guarantee on the
Nickel-Cadmium cells
and internal electronics.
PAGLIGHT
visit www.paguk.com for more information
Another success for PAG’s
lighting design team
Choose from the world's
best camera lights...
Paglight
The original halogen or arc
12V broadcast camera light.
Features detachable power
base. Still the most versatile
light in the industry ( Page 17).
Reflector: 45mm dia.
Paglight M
Miniaturised version of the
12V Paglight for use with
smaller digital camcorders.
Features detachable power
base ( Page 21).
Reflector: 35mm dia.
Paglight C6 DV Kit
An all-inclusive 6V lighting
kit, incorporating 6V battery
and charger, designed for
use with mini-DV
camcorders (Page 25).
Reflector: 35mm dia.
Paglight L
A 250W hand-held location
fill-light or ‘basher’ available
in 24V and 30V models
( Page 23).
Reflector: 60mm dia.
Designed and developed at
our own London research
laboratory, Paglights are the
ultimate in camera lighting.
The original 12V Paglight was
the first on-board camera light
designed specifically to meet the
requirements of the broadcast
industry. PAG now offers a family
of lights, designed to fulfil a variety
of professional requirements, but
sharing many of the unique
features that made Paglight the
industry standard.
Paglights are robust, light in
weight, cool-running and fullyfocusable. Their versatility has
been achieved as a result of PAG’s
patented plug-in lampholder
feature. This is best illustrated in
the original 12V professional
Paglight which is both a halogen
and a metal-halide arc light.
Plug-in lampholder options for this
light also include Softstart, for use
with Li-Ion batteries, and the
power-saving, regulated PowerMax
unit, which incorporates a dimming
facility called VariLux (see Page 17).
can be powered from a range of
12V to 14.8V battery packs and
belts, and is available with a
choice of detachable power bases,
as well as a Softstart lampholder
option (see Page 21).
For mini-DV camcorders users,
whether professional or consumer,
the Paglight C6 DV Lighting Kit is
an ideal solution. This selfcontained, broadcast quality 6V
system provides everything you
need - Paglight, diffuser, dichroic,
barndoors, battery and charger at
a price to suit any equipment
budget. (see Page 25).
Paglight L is a 250W ‘basher’ or
fill-light, available in 24V and 30V
models. It is the perfect hand-held
location light with many features of
PAG’s original on-board camera
light: quick and easy lampchanging, detachable power base
and a range of accessories (see
Page 23).
Paglight M was introduced to suit
the dimensions of the smaller,
digital camcorders. This miniaturised version of the 12V Paglight
16
PAGLIGHT
visit www.paguk.com for more information
The world’s
most versatile
12V broadcast
camera light
Paglight
Paglight is a revolutionary camera
light, the first specifically designed
to suit professional ENG/EFP
requirements, and answer the
many requests for an all-embracing,
single operator camera light.
PAG's unique patented design
makes Paglight the coolest running
and most versatile camera light in
the industry. Interchangeable plugin lamp holders fit into the back of
the lamp body. Variants of wattage
and unit type can be exchanged
without handling the lamp.
12V ENG/EFP Camera Light
Rotatable
Accessory Kit
CoolRunning
Even
spectral
distribution
Fully Focusable
Plug-in
Standard
Softstart,
PowerMax or
PowerArc
options
Detachable
Power Base
There are four lampholder options,
three of which accept standard bipin halogen lamps.
STANDARD LAMPHOLDER
Accepts 20W, 35W, 50W, 75W
and 100W halogen lamps.
Instant conversion to PowerArc.
Detachable power base.
SOFTSTART
LAMPHOLDER
Prevents the cold
lamp start-up surge
from activating the overcurrent protection circuits within
Li-Ion batteries. (Not required when
using a Sony lamp output, or a
camera equipped with PAG
System RTI).
POWERMAX
CONTROL/
VARILUX
A voltage regulated unit
that prolongs battery
run-time and saves lamp
Paglight is the coolest running light in the business
filament life. VariLux is a lamp
dimming facility which also
conserves battery power.
POWERARC
Paglight can be
instantly converted to HMI by
plugging in the
PowerArc unit. The
arc lamp consumes only 24W but
provides the equivalent of 100W of
daylight output, and makes the
Paglight the industry’s most
versatile camera light (see
Paglight PowerArc Kit, Page 20).
FULLY FOCUSABLE
Paglight is continuously focusable
with a beam angle that is variable
from spot to flood, and has an even
spectral distribution.
ROTATABLE
ACCESSORY
KIT
This accessory
ring holds
any combination
of snap-in barndoors (tapered or
parallel), dichroic
filters or diffuser and can be fitted
to the front of the light. The
assembly can be rotated easily to
give the desired configuration.
SOFTLIGHT DIFFUSER AND
FILTER KIT
This filter holding assembly fits
onto the barndoors and enables
you to create supersoft lighting or
special effects with colour
gelatine filters.
PAGLIGHT POWER BASES
These low-profile, pre-wired, hotshoe bases enable the Paglight to
be easily and quickly mounted or
removed from the camera, and are
available with a variety of
connectors and lead lengths.
Registered Design No. 2071515 Patent No. 2335027
17
PAGLIGHT
visit www.paguk.com for more information
Paglight Options
Model 9956 Paglight XLR-4
Model 9965 Paglight Snap-on
For use with XLR-4 output (Pagbelt
IC2 or PAG Powerman).
For use with the Snap-on mount,
and Ni-Cd or Ni-MH batteries.
Standard
Lampholder
Standard
Lampholder
Snap-on Power Base
(500mm)
XLR-4 Power Base (1.5m)
Shoe Plate
Stud Adaptor
Model 9947 Paglight XLR-4
Shoe Plate
Stud Adaptor
Model 9945 Paglight Snap-on
For use with XLR-4 output (Pagbelt
IC2 or PAG Powerman). PowerMax
provides dimming facility and
voltage regulation.
XLR-4 Power Base (1.5m)
Shoe Plate
PowerMax/
VariLux
Lampholder
For use with the Snap-on mount,
and Li-Ion batteries (20W or 35W
lamp required).
Snap-on Power Base
(500mm)
Stud Adaptor
Shoe Plate
Model 9964 Paglight PP90
Model 9948 Paglight Snap-on
For use with Ni-Cd and Ni-MH
PAGlok batteries.
For use with the Snap-on mount,
and Ni-Cd or Ni-MH batteries.
PowerMax provides dimming
facility and voltage regulation.
Standard
Lampholder
PP90 Power Base
(500mm)
Shoe Plate
Softstart
Lampholder
Snap-on Power Base
(500mm)
Shoe Plate
Stud Adaptor
Stud Adaptor
PowerMax/
VariLux
Lampholder
Stud Adaptor
Model 9966 Paglight SX
Model 9944 Paglight PP90
For use with Li-Ion PAGlok
batteries (20W or 35W lamp
required).
Softstart
Lampholder
PP90 Power Base
(500mm)
Shoe Plate
Stud Adaptor
For use with the Sony SX camera
and Li-Ion, Ni-Cd or Ni-MH
batteries (20W or 35W lamp
required for use with Li-Ion
batteries).
Standard
Lampholder
SX Power Base
(150mm)
Shoe Plate
Stud Adaptor
Model 9946 Paglight PP90
For use with Ni-Cd and Ni-MH
PAGlok batteries. PowerMax
provides dimming facility and
voltage regulation.
PP90 Power Base
(500mm)
Shoe Plate
PowerMax/
VariLux
Lampholder
Stud Adaptor
SOLD SEPARATELY (see page 19):
20W, 35W 50W, 75W and 100W halogen lamps.
Rotatable Accessory Kits (diffuser, dichroic filter and barndoors).
PowerArc Unit and Arc lamp.
Lamp Protectors.
Softlight Diffuser and Filter Kit.
Universal mounting options (see Page 24)
18
PAGLIGHT
visit www.paguk.com for more information
Paglight System
9967 Arc Lamp
9954 Parallel
Barndoors
9951 Dichroic Filter
(halogen to daylight)
9973 PowerArc
Conversion Filter
(daylight to halogen)
9955 PowerArc
(includes Lamp Protector)
GY6.35 12V Lamps
9930 20W Lamp
9968 Lamp Protector
9963 Tapered
Barndoors
9952
Diffuser
9958 PowerMax/VariLux
(includes Lamp Protector)
9931 35W Lamp
9953
Rotatable
Accessory Holder
(ring only)
9912 50W Lamp
9938 Softstart
(includes Lamp Protector)
9932 75W Lamp
9959 Rotatable
Accessory Kit
Comprises: Ring,
Dichroic, Diffuser
& Parallel
Barndoors
9983 Softlight Diffuser
and Filter Kit for ultra-soft
or colour lighting effects.
Comprises:
2 x Filter holders
2 x Softlight diffusers
2 x Full CT blue filters
2 x Half CT blue filters
2 x Half CT orange filters
(See price list for Model
Nos. of individual parts).
9911 100W Lamp
9950 Standard Lampholder
(includes Lamp Protector)
9957 PP90 Power Base (500mm), 9943 (1m), 9986 (150mm)
9960 XLR-4 Power Base (1.5m)
9969 Wattage Label Kit
Colour coded wattage
identification labels for
Standard Lampholders
9961 Snap-on Power Base (500mm)
9962 Sony SX Power Base (150mm)
9987 Base Locking Adaptor
Registered Design No. 2071515, Patent No. 2335027
19
See Universal Mounting
Options on Page 24.
PAGLIGHT
visit www.paguk.com for more information
Paglight Kits
Paglight Kits are supplied in a
fitted flight case and comprise:
a Paglight with XLR-4 Power Base
a standard lampholder, 2 lamps,
a camera shoe plate, a male to
male stud adaptor and a handle.
A Rotatable Accessory Kit,
comprising: rotatable accessory
holder, 1 pair of parallel barndoors,
1 dichroic filter and 1 diffuser.
Pagbelt IC2 with integral overnight
charger and a power lead suitable
for country of use (not shown).
Model
Pagbelt IC2
Weight
9873
12V 5Ah
7.0kg
9874
12V 7Ah
7.8kg
9875
12V 10Ah
9.8kg
9876
13.2V 5Ah
7.2kg
9877
13.2V 7Ah
8.1kg
9878
13.2V 10Ah
10.5kg
Paglight Kits
incorporating
Pagbelt IC2
Paglight PowerArc Field Kit
A
B
C
D
E
F
G
H
I
J
K
L
M
*
Paglight.
Choice of Power Base.
Standard Lampholder (with
choice of lamp).
Standard Lampholder and
protector (with choice of
lamp).
PowerArc Unit and protector
(with arc lamp).
Rotatable Accessory Kit.
Comprising: accessory holder,
1 pair of parallel barndoors,
1 dichroic filter and 1 diffuser.
Tapered Barndoors.
PowerArc Conversion Filter.
Handle.
Camera Clamp.
Camera Shoe Plate.
Stud Adaptor.
Fitted Flight Case.
Storage space for additional
components.
The Paglight PowerArc Field Kit
incorporates the PAG PowerArc
HMI unit and two standard halogen
lamp units, enabling you to take
full advantage of the unique plugin lampholder system that makes
Paglight the industry’s most
versatile camera light.
The kit is tailored to your requirements with a choice of Power Base
(see Paglight System opposite)
and a choice of two halogen lamps
(20W to 100W).
D
A
C
Paglight
Halogen and
HMI Lighting
Kit
E
*
F
H
L
B
J
G
K
*
I
The components are housed in a
strong, lightweight and compact
fitted flight case that incorporates
space for additional Paglight
components.
Paglight PowerArc Field Kit
468 x 386 x 109mm / 3kg
Model 9825
M
20
PAGLIGHT M
visit www.paguk.com for more information
Paglight M
A miniature
12V camera
light for use
with smaller
camcorders
12V DV Camera Light
Fully Focusable
The Paglight M is an ultra-compact
12V light that embodies many
features of the larger Paglight.
It has been designed specifically
for use with the new generation of
smaller digital camcorders.
Rotatable
Accessory
Kit
Cool-running
Standard or Softstart
plug-in lampholders
Detachable
Power Base
COOL-RUNNING
Paglight M is constructed from
a glass-reinforced engineering
polymer that provides strength
and temperature stability. PAG’s
patented design ensures the
Paglight M is cool-running at all
times.
FULLY FOCUSABLE
Paglight M is continuously
focusable from spot to flood with
an even spectral distribution.
PLUG-IN LAMPHOLDERS
The plug-in lampholder system
makes lamp changing quick and
easy. A choice of standard or
Softstart lampholders is available.
Softstart prevents the cold lamp
start-up surge from activating the
over-current protection circuits
within Li-Ion batteries.
Both lampholders utilise 10W, 20W
and 35W standard G4-size 12V
halogen lamps. Wattage variants
can be changed without the need
to handle the lamp. When not in
use, each lampholder can be
stored in a heat-resistant polymer
lamp protector. Lampholders are
supplied with wattage identification labels.
Alternative
mounting
options for
Paglight &
Paglight M
ROTATABLE
ACCESSORY
RING
A rotatable
accessory ring
can be fitted to
the front of the
light, which
accommodates
snap-in barndoors, a dichroic filter,
and a diffuser.
SOFTLIGHT DIFFUSER AND
FILTER KIT
This useful accessory fits onto the
barndoors and enables you to
create super-soft lighting or
special effects with colour gelatine
filters.
PAGLIGHT
POWER BASES
Paglight M
incorporates a
hot-shoe type
power base with a flying lead.
A variety of connectors is
available, suitable for most
camcorders. The power base
features a 1/4” Whit. thread. This
allows the unit to be mounted to
the camera via a variety of
universal mounting accessories
(see Page 24).
Power-to-Light Adaptors
These useful accessories enable
you to power a Paglight or a
Paglight M with a PAGlok or Snapon compatible battery. A convenient
way of powering and positioning an
additional light source on location.
Paglight
9991
PAG Power-to-Light Adaptors
21
9991
PAGlok Connector
to Paglight
9994
PAGlok Connector
to Paglight M
9992
Snap-on compatible
to Paglight
9995
Snap-on compatible
to Paglight M
9992
9994
Battery
PAG Power to
Light Adaptors
9995
PAGLIGHT M
visit www.paguk.com for more information
Paglight M Options
Model 9003 Paglight M Snap-on
Model 9001 Paglight M PP90
For use with Ni-Cd or Ni-MH
PAGlok batteries. Softstart
Lampholder should be used with
Li-Ion batteries.
Standard
Lampholder
For use with the Snap-on mount,
and Ni-Cd or Ni-MH batteries.
Softstart Lampholder should be
used with Li-Ion batteries.
PP90 Power Base
(500mm)
Shoe Plate
Shoe Plate
Stud Adaptor
Model 9002 Paglight M XLR-4
Snap-on
Power Base
(500mm)
Standard
Lampholder
Stud Adaptor
Model 9004 Paglight M SX
For use with camcorders that
incorporate a XLR-4 output, or to
power from Pagbelt IC2 or PAG
Powerman batteries.
For use with the Sony SX camera.
Standard
Lampholder
SX Power Base
(150mm)
XLR-4 Power Base (1.5m)
Shoe Plate
Stud Adaptor
Shoe Plate
Standard
Lampholder
Stud Adaptor
SOLD SEPARATELY (see below): Softstart lampholders; 10W, 20W & 35W
halogen lamps; Rotatable Accessory Kits (diffuser, dichroic filter and
barndoors); Softlight Diffuser and Filter Kit; Universal mounting options
(see Page 24).
Paglight M System
G4 12V Lamps
9011 Barndoors
(pair)
9009 Dichroic
Filter
9010 Diffuser
9008 Accessory
Holder (ring only)
9021 Lamp
Protector
9017 Softstart Lampholder
(Lamp protector & wattage
labels)
9018 12V 10W
9019 12V 20W
9007 Rotatable
Accessory Kit
comprises
accessory holder,
1 pair of barndoors,
1 dichroic filter and
1 diffuser
9020 12V 35W
9016 Standard
Lampholder
(Lamp protector &
wattage labels)
9983 Softlight Diffuser
and Filter Kit for
ultra-soft or colour
lighting effects.
Comprises:
2 x Filter holders
2 x Softlight diffusers
2 x Full CT blue filters
2 x Half CT blue filters
2 x Half CT orange filters
9012 PP90 Power Base (500mm)
9013 XLR-4 Power Base (1.5m)
(See price list for Model
Nos. of individual parts).
9014 Snap-on Power Base (500mm)
See Universal Mounting
Options on Page 24.
9015 SX Power Base (150mm)
22
PAGLIGHT L
visit www.paguk.com for more information
A 24V or 30V
250W HandHeld Location
Fill-Light
Paglight L24 & L30
PERFECT POSITIONING
The lamp body has a multidirectional mounting and may be
adjusted vertically and horizontally.
The desired position can be
maintained by a locking lever
situated on the side of the light
base.
23
DETACHABLE POWER BASE
The 250W Paglight has a
detachable power base that
incorporates a lead terminated
with an XLR-4 connector. This can
be used to power the light from a
Pagbelt IC2 or Powerman battery.
The base incorporates a 1/4” Whit
bush which enables the light to be
mounted to a tripod or a handle
(see Universal Paglight Mounting
Options Page 24).
Diffuser
Fully Focusable
Plug-in
Lampholder
FULLY-FOCUSABLE
Focusing is provided by a lever
situated on the side of the lamp
body and is continuously variable
from narrow to wide angle.
HEAT DISSIPATION
The lamp body and reflector
housing are constructed to
maximise the dissipation of heat
as well as to provide strength and
impact resistance.
24V or 30V
250W Kit
incorporating
Pagbelt IC2
Rotatable
Accessory
Holder
A compact and portable 250W filllight, available in 24V and 30V
models, and incorporating many
features of PAG’s on-board camera
light.
PLUG-IN LAMPHOLDERS
A lampholder unit plugs into the
rear of the light and is locked in
position. It can be easily withdrawn, making lamp replacement
safe and quick.
An ideal power source for the 250W
Paglight L is the PAG Powerman
Battery (see Page 14).
250W 24V or 30V Paglight L
Tapered or
parallel
barndoors
PositionLock Lever
Even spectral
distribution
Detachable
Power Base
XLR-4
Dichroic
Filter
Handle
250W Paglight L Options
Model 9031 L24
24V 250W
Lampholder
XLR-4 Power Base (1.5m)
Model 9032 L30
30V 250W
Lampholder
XLR-4 Power Base (1.5m)
Accessory Kit, handle, lamp protector and lamps are sold separately.
250W Paglight Kits
Paglight 250W Kits:
Comprises Paglight, XLR-4 power base and plug-in lampholder,
accessory ring, diffuser, dichroic filter, parallel barndoors (pair), handle,
2 x 250W lamps, Pagbelt IC2 with integral overnight charger, AC power lead
for country of use and fitted flight case.
9041
Paglight L24 Kit
(24V 5Ah Pagbelt IC2)
9042
Paglight L24 Kit
(24V 7Ah Pagbelt IC2)
9043
Paglight L30 Kit
(30V 5Ah Pagbelt IC2)
9044
Paglight L30 Kit
(30V 7Ah Pagbelt IC2)
Paglight L24 and L30 kits incorporate
the appropriate Pagbelt IC2.
MOUNTING OPTIONS
visit www.paguk.com for more information
Paglight L24 & L30 System
9033 Rotatable Accessory Kit:
Ring, Diffuser, Dichroic and
Parallel Barndoors
9038
Tapered Barndoors (pair)
9037
Parallel Barndoors (pair)
9040 30V Lampholder
and Protector
9914 30V 250W lamp
9036 Diffuser
9039 24V Lampholder
and Protector
9035 Dichroic Filter
9034
Accessory Holder
(ring only)
9913 24V 250W lamp
9960 XLR-4 Power Base (1.5m)
See Universal Mounting
Options below.
Universal Paglight Mounting Options
These useful accessories enable any Paglight to be mounted to any camera, tripod, lighting rig or gaff grip.
9971
Stud Adaptor
male to male
1/4” Whit.
9972
Camera
Shoe Plate
1/4” Whit.
9990 Extender Arm 1/4” Whit.
Lifts the Paglight clear of the microphone,
and allows the subject to be lit from the side.
Includes shoes for Sony and Panasonic mounts.
Universal
Mounting
Options for
all Paglights
9807 Camera Clamp
bush 1/4” Whit.
Clamps the Paglight to
the handle of the camera.
9978 Mounting Adaptor Kit: comprises
9971, 9974, 9975, 9976 & 9977
9906
Handle stud to
bush1/4” Whit.
(length 127mm)
9985
Spigot Adaptor
1/2” dia. to
1/4” Whit.
9974
Thread Adaptor
3/8” dia. to
1/4” Whit.
9976
Spigot Pin
5/8” dia. to
1/4” Whit.
9975
Spigot Pin
1/2” dia. to
1/4” Whit.
9977
Multi-Configuration Spigot
Adaptor: 5/8", 1/2" and
1/4” dia. in-line or 90°
conversion.
Paglight Extender Arm.
24
PAGLIGHT C6
visit www.paguk.com for more information
The only
broadcast
quality DV
lighting kit
Paglight C6 is an all-inclusive
6V lighting kit for DV camcorders
BROADCAST QUALITY
The broadcast-quality Paglight
C6 camera light incorporates many
features of the larger Paglight,
including a focusable beam angle,
and a patented system that makes
lamp-changing quick and easy.
COOL-RUNNING
Paglight C6 is constructed from
a glass-reinforced engineering
polymer that provides strength and
temperature stability. PAG’s
patented design ensures the C6
is cool-running.
Paglight C6
Mounting
Options
A short Accessory/Extender Arm
(Model 1020) with two accessory
shoes is available that allows the
Paglight C6 and a microphone to be
mounted to the camcorder.
PLUG-IN LAMPHOLDERS
The plug-in lampholder system
makes lamp changing quick and
easy. The C6 is supplied with a
lampholder and a 6V 20W tungsten
halogen lamp (10W, 20W and 30W
lamps are available). Wattage
variants can be changed without
the need to handle the lamp. When
not in use, lamp-holders can be
stored in a heat-resistant lamp
protector.
Fully-focusable
2¼ hours
run-time
at 20W!
Battery, Charger,
and Camera Shoe
Plate included
Model 1001 Paglight C6 DV Lighting Kit
ROTATABLE ACCESSORY RING
A rotatable accessory ring is fitted
to the front of the light, which
accommodates barndoors, a
dichroic filter, and a diffuser. PAG’s
Softlight Diffuser & Filter Kit can
also be used with C6 for ultra-soft
or colour lighting effects.
Charger
PERFECT POSITIONING
Paglight C6 can be adjusted
vertically and horizontally, and
locked in position. A square shoe
plate is supplied, allowing the unit
to be mounted to camcorders with
an accessory shoe.
The Paglight C6 base is fitted
with a flying lead terminated with
a professional-quality latching
connector for connection to the
C6 PowerPack.
25
Includes
lampholder
and 20W
lamp
FULLY FOCUSABLE
The beam angle is fully-focusable,
with a smooth transition from
spot to flood and an even spectral
distribution.
The Paglight C6 base incorporates
a 1/4” Whitworth bush. This
enables the light to be used with
other mounting options (see
Page 24).
For camcorders without an accessory
shoe PAG provides an Accessory
Mounting Bracket (Model 1021) that
can be fitted to the 1/4” Whit. bush on
the base of the camcorder.
Cool-running
Includes Rotatable
Accessory Kit
ALL INCLUSIVE LIGHTING KIT
Paglight C6 is powered from its
own 6V 7Ah Ni-Cd PowerPack.
This rechargeable battery, weigh-
Battery
Paglight C6
Comprises:
Paglight C6 / Plug-in Lampholder and 20W lamp / Accessory ring, daylight
filter, diffuser & barndoors / Camera Shoe Plate / PAG C6 PowerPack with
shoulder strap / PAG Power Charger with plug.
ing little more than 1kg, has a
detachable shoulder strap. A belt
clip is also available that enables
the battery to be worn on the users
belt or trouser waistband.
The battery, when fully charged,
will provide two and a quarter
hours of run-time with a 20W lamp.
An additional battery will enable
you to shoot for a whole day.
The AC charger supplied will
charge the battery in three to four
hours, from fully discharged. It will
automatically recover the battery
prior to fast-charging, if it has been
deeply discharged. The charger
also provides a maintenance topup charge after full charge. The
charger has an interchangeable
power plug and can be powered
from AC supplies worldwide.
Paglight C6 and its accessories
can be purchased on-line at
www.paguk.com/c6
PAGLIGHT C6
visit www.paguk.com for more information
Paglight C6 Parts
See Universal Mounting
Options on Page 24.
1019
Barndoor
(single item)
1013
Dichroic
Filter
1014
Diffuser
1016
Accessory
Holder
(ring only)
G4 6V Lamps
1010 6V 10W lamp
9983 Softlight Diffuser and
Filter Kit for ultra-soft or
colour lighting effects.
Comprises:
2 x Filter holders
2 x Softlight diffusers
2 x Full CT blue filters
2 x Half CT blue filters
2 x Half CT orange filters
(See price list for Model
Nos. of individual parts).
1011 6V 20W lamp
1009 Lampholder &
Lamp Protector
1012 6V 30W lamp
9972 Camera
Shoe Plate
B0510 Shoulder Strap
1004 Charger
plug (UK)
1020 Accessory/
Extender Arm (short)
1003 Charger
plug (Europe)
1005 Charger
plug (US/Japan)
1022 Belt
Clip for C6
PowerPack
1008 PAG C6 PowerPack
6V 7Ah (with shoulder strap)
1021 Accessory
Mounting Bracket
1002 PAG Power
Charger (includes plug
of choice)
1006 Charger
plug (Australia)
The following are trademarks of PAG Ltd.: ‘PAG Advanced Battery Systems’
‘System RTI’ ‘Softstart’ ‘Time Battery’ ‘Power & Time Display’ ‘SuperPack’
‘PAG ACS’ ‘PAG CMS’ ‘AR Series 2’ ‘PAG Pulsar’ ‘PAG Quasar’ ‘PAG Freelancer’
‘Power Plate’ ‘PAGlok’ ‘Pagbelt’ ‘ODP’ ‘Widerange’ ‘Paglight’ ‘PowerArc’ & ‘PowerMax’.
All third party trademarks are acknowledged as such.
‘Snap-on’ and ‘Anton-Bauer Mount’ refers to Anton-Bauer connector
U.S.Patent 4,218,107.
© 2005 PAG Ltd.
26
visit www.paguk.com for more information
PAG Ltd.
565 Kingston Road
Raynes Park
London SW20 8SA
T +44 (0) 20 8543 3131
F +44 (0) 20 8540 4116
E [email protected]
www.paguk.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement