- No category
advertisement
Ihr Spezialist für
Mess- und Prüfgeräte
Keysight Technologies
M9037A PXIe Embedded Controller
2.4 GHz Quad-Core
Data Sheet
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
Introduction
Product Description
The Keysight Technologies, Inc. M9037A is a four-slot PXIe embedded PC controller with Windows
Embedded Standard 7 operating systems designed for high-performance and complex, multi-chassis systems. It is also well-suited for secure environments due to its front-panel, removable solid state drive (SSD).
The embedded controller is built upon a high-performance, low power Intel i7-4700EQ 2.4 GHz processor with 8-threads supported through 4 cores and hyper-threading. It is ideal for product validation and manufacturing test.
Applications
– Aerospace and defense
– RF semiconductor
– Wireless communications
– General purpose applications
– Electronic functional test
Features
– Intel i7-4700EQ 2.4 GHz processor
– 4-slot PXI controller module
– Front removable 240 GB solid state drive
– Up to 16 GB RAM Memory
– Gen 3 PCIe ® , 4- or 2-link (up to x24) configuration providing up to 16 GB/s max data bandwidth from CPU to PXIe backplane
– Front panel connection connections: four USB 2.0, two USB 3.0, two LAN (10/100/1000), two
DisplayPort, one GPIB, one SMB trigger
– x8 Gen 3 PCIe IPASS connector on the front for controlling a second PXIe or AXIe chassis or connection to RAID storage
Customer values
– High performance, extended life CPU
– Controller supports connections to multi-chassis and RAID storage directly from controller without using high value instrument slots
– Intel i7 Hyper Threading and multi-core technology provides performance required for multi-threaded applications
– Preloaded with operating system, drivers and Keysight IO libraries for reduced startup time
– The removable solid state drive (SSD) offers faster boot time and mechanical reliability
– SSD can be easily removed from the front panel and secured when not in use
2 dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
03 | Keysight | M9037A PXIe Embedded Controller - Data Sheet
High Performance Hardware Platform
Based on the high performance Intel i7 processor with hyper-threading technology, the
M9037A is ideal for multi-threading environments found on multi-chassis systems.
Figure 1. Keysight M9037A block diagram.
Quad-Core Processor
The Intel i7-4700EQ quad-core processor offers superior CPU, graphics, enhanced security and media performance. Built into the M9037A, it provides:
– Lower power consumption, higher performance per watt, faster loading times for demanding applications, with best multitasking performance
– Intel Hyper-Threading Technology offers a total of 8 simultaneous threads
– Direct media interface (DMI) with 5 GT/s data bandwidth in each direction
– GPU acceleration, accessible for integration with your applications, offers the benefit of significantly faster application run times.
– Security and management functions are supported by Intel’s vPro Technology
The provided Microsoft Windows Embedded 7 operating system takes full advantage of the processor’s capabilities.
3 dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
04 | Keysight | M9037A PXIe Embedded Controller - Data Sheet
Memory
The M9037A has two 204-pin SODIMM memory sockets which support
DDR3L-1333/1600 RAM. Each socket can support 4 GB, 8 GB or 16 GB (when available) memory modules for a total memory capacity of 32 GB. The standard configuration utilizes a single 4 GB memory module.
Solid-State Drive
Secure environments benefit from the easily accessible, front removable 240 GB solid state drive (SSD) that is secured with front panel thumb screws. The SSD provides a faster boot time and is immune to vibration damage that mechanical drives may experience.
Video
The two DisplayPort++ front panel connectors offer high band-width, built-in cable retention and multiple monitor support. Each Dual Mode DisplayPort++ connector can support either a DisplayPort or DVI-D monitor. Optional DisplayPort cables include
Y1261A DisplayPort to DVI adapter, Y1262A DisplayPort cable, and Y1263A Display Port to VGA adapter. Customer supplied DVI, VGA, and HDMI adapters may also be used.
Peripheral I/O
The M9037A front panel connections include four USB 2.0 and two USB 3.0 connections, two Gigabit Ethernet ports, and GPIB. A Gen 3 x8 PCIe connector is also available for external RAID drives and multi-chassis operation. This allows PXI system expansion without requiring an additional expansion card in the host PXI chassis. Gen 3 operation is available on M9307As with a Serial Number of TW57010001 and greater. It is Gen 2 on earlier controllers.
PXI Trigger
The front panel includes a bi-directional trigger connector for routing an external trigger signal to/from the PXI backplane.
PXIe Backplane Configuration
Experience large backplane data bandwidth utilizing the x16 Gen 3 PCIe connection from the CPU to the PXIe chassis backplane. The embedded controller PCIe backplane switch provides a flexible backplane connection that can operate in a 2- or 4-link configuration.
– The PCIe x16 Gen 3 link between CPU and backplane provides up to 16 GB/s theoretical, 14.2 GB/s practical.
4 dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
05 | Keysight | M9037A PXIe Embedded Controller - Data Sheet
Multi-Chassis Configurations
The M9037A PXIe controller with 64-bit Windows Embedded 7, can be used to control up to 4 M9018A chassis in either a cascade or star configuration. It is recommended that the controller is configured with 8 GB or more of RAM for multi-chassis operation.
Embedded controllers with 32-bit operating systems will only support two chassis.
The x8 PCIe connector on the front panel can be used for cascading to a second chassis or connection to RAID storage (Gen 3).
The M9037A with Windows Embedded Standard 7, 64-bit (option WE6) is pre-loaded with the required software for maximum multi-chassis capability. For additional information regarding multi-chassis configuration .
Easy maintenance and support
The M9037A can easily be updated. The SSD drive can be installed or removed via the front panel without the need for tools or to remove covers. The SSD includes a recovery partition that can be used to restore the drive to factory default conditions. With the controller uninstalled from a chassis, SODIMM memory is easily accessed and requires no tools to remove or replace.
Software platform
The controller supports Microsoft Windows Embedded 7 (32-bit or 64-bit) which is installed along with drivers (for the M9018A PXIe 18-slot chassis and M9037A embedded controller), Keysight I/O libraries, VISA, Keysight Connection Expert, and the I/O monitor software.
The external trigger can be controlled by either the IVI driver or soft front panel which are also pre-installed on the controller.
PXI trigger in/out Status LEDs
LAN (2)
USB 2.0 (4)
GPIB
Dual display port
USB 3.0 (2)
PCIe bus for multi-chassis for
RAID connection
Figure 2. Front panel connections for M9037A.
Figure 3. Removable SSD, included with M9037A.
5 dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
06 | Keysight | M9037A PXIe Embedded Controller - Data Sheet
Technical Specifications and Characteristics
General characteristics
Controller characteristics
CPU
CPU threads
CPU clock frequency
Chipset
Video
Memory
Type
Maximum resolution
Cache
RAM type RAM capacity
Intel i7-4700EQ quad-core processor
8
2.4 GHz
Mobile Intel QM57Express
Integrated Intel HD Graphics 4600 1
DP: 3840 x 2160 @ 60 Hz
DVI: 1920 x 1200 @ 60 Hz
DisplayPort adapters to other display standards are available in the market. Maximum resolution achieved is dependent on the adapter chosen.
6 MB
Two DDR3L 1600 204-pin SODIMM sockets
4 GB standard, 8 GB or 16 GB optional for up to 32 GB maximum when
16 GB RAM becomes available 2
2.5” SATA
240 GB SSD
Windows Embedded 7 (32- and 64-bit)
Storage
Operating system support
Pre-loaded software
Type
Size
Operating system, trigger driver, Keysight I/O libraries,
PXIe chassis and M9037A drivers
Mechanical characteristics
Dimensions
Chassis slot compatibility
Weight
DC power requirements
DC supply
Idle (SATA, Mice & KB)
Full-loading
I/O characteristics
Front panel connections
USB
Ethernet
Video
GPIB
PCIe connector
PXI trigger
PXIe backplane I/O
PCIe link
PXI trigger bus
Configuration
Data bandwidth
3U/4-slot PXI/CompactPCI standard
PXIe system module slot (with three controller expansion slots)
1 kg (2.2 lbs)
+3.3 V
3.0 A
3.0 A
+5 V
2.1 A
3.9 A
Four USB 2.0 (type A), Two USB 3.0 ports
Two 10/100/1000BASE-T (RJ45)
Dual Mode DisplayPort++ (DVI-D, VGA, HDMI with an adapter)
Micro-D 25-pin x8 PCIe connector (Gen 3 3 )
SMB (programmable direction)
+12 V
1.6 A
5.3 A
+5 VSB Mean
0.13 A
0.13 A
Total (Watts)
40.3 W
93.7 W.
Two-link (x8 and x16) and four-link (4x4) automatically configured based on chassis configuration
16 GB/s max to/from the processor to PXIe backplane (Gen 3 chassis)
Selectable routing to/from all 8 PXI_TRIG lines
1. VGA, DVI, HDMI require adapters
2. 32-bit Windows 7 can only access a maximum of 4 GB of memory (physical + virtual)
3. Front panel PCIe connector is rated up Gen 3 with M9037A Serial Number TW57010001 and greater
6 dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
07 | Keysight | M9037A PXIe Embedded Controller - Data Sheet
Technical Specifications and Characteristics (continued)
Environmental characteristics 3. 4
Operating and storage conditions
Temperature
Humidity
Operating altitude
Storage altitude
Operating
0˚C to 55˚C
Type-tested at 95%, +40˚C (non-condensing)
Up to 3048 m (10 kft)
15 kft (4572 m)
Vibration
Operating random vibration: type-tested at 5 to 500 Hz, 0.21 g rms
Survival random vibration: type-tested at 5 to 500 Hz, 2.09 g rms
Storage
-40˚C to 70˚C
Regulatory characteristics
Safety
IEC/EN 61010-1, 3rd Edition
Canada: CSA C22.2 No. 61010-1-12
USA: UL std no. 61010-1, 3rd Edition
EMC
Complies with European EMC Directive 2004/108/EC
IEC/EN 61326-1
CISPR Pub 11 Group 1, Class A
AS/NZS CISPR 11
ICES/NMB-001
This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme
Cet appareil ISM est conforme a la norme NMB-001 du Canada
3. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, transportation and end-use; those stresses include but are not limited to temperature, humidity, shock, vibration, altitude, and power line conditions.
4. Test methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3.
7 dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
Ihr Spezialist für
Mess- und Prüfgeräte
08 | Keysight | M9037A PXIe Embedded Controller - Data Sheet
Configurations and Ordering Information
Software information
Model
Supporting operating systems
Description
Microsoft Windows Embedded 7
(32/64-bit)
Standard compliant drivers IVI-COM, IVI-C, LabView
Supported application development environments
(ADE)
Keysight IO Libraries
Visual Studio (VB.NET, C#, C/C++),
LabVIEW, LabWindows/CVI, MATLAB
Includes: VISA Libraries, Keysight
Connection Expert, IO Monitor
Definitions for specifications
Specifications describe the warranted performance of calibrated instruments that have been stored for a minimum of two hours within the operating temperature range of 0 to 50 °C, unless otherwise stated, and after a 45 minute warm-up period. Data represented in this document are specifications unless otherwise noted.
Characteristics describe product performance that is useful in the application of the product, but that is not covered by the product warranty. Characteristics are often referred to as
Typical or Nominal values.
– Typical describes characteristic performance, which 80% of instruments will meet when operated over a 20 to 30 °C temperature range. Typical performance is not warranted.
– Nominal describes representative performance that is useful in the application of the product when operated over a
20 to 30 °C temperature range. Nominal performance is not warranted.
Note: All graphs contain measured data from several units at room temperature unless otherwise noted.
Ordering information
Model
M9037A
M9037A-M08
M9037A-M16
M9037A-WE3
M9037A-WE6
Y1206A
Y1260A
Y1261A
Y1262A
Y1264A
Y1265A
Description
PXIe embedded PC controller, Intel I7
Memory upgrade from
4 GB RAM to 8 GB RAM
Memory upgrade from
4 GB RAM to 16 GB RAM
Microsoft Windows Embedded Standard 7 operating system (32 bit)
Windows Windows Embedded Standard 7 operating system (64 bit)
Keyboard and optical mouse
GPIB cable *
Display Port to DVI adapter
DisplayPort cable
Spare SSD with carrier: WES 7/32 *
Spare SSD with carrier: WES 7/64 *
* Will not work with M9036A controller
Related products
Model
M9010A
M9018B
M9019A
Description
PXIe Chassis: 10-slot, 3U, 24GB/s
PXIe Chassis: 18-slot, 3U, 8GB/s
PXIe Chassis: 18-slot, 3U, 24GB/s
Warranty
Advantage services: Warranty
Keysight Advantage Services is committed to your success throughout your equipment’s lifetime
Standard Return-to-Keysight warranty - 3 years
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. +49 7121 / 51 50 50 ▪ Fax +49 7121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project