null  null
Volvo Trucks. Driving Progress
FMX11 6x2 Platform - Tag - Rear Air Suspension FM 62 TR1HAX
3022
,672
Cab 2490
Chassis Dimensions [mm]
WB Wheelbase
3500
3700
3900
4300
4600
A
D
N
N
Overall Chassis Length
Center of rear axle to front of body
Rear Overhang (Min.)
Rear Overhang (Max.)
8315
2928
1225
1925
8615
3128
1225
2025
8915
3328
1225
2125
9565 10015 10315 10465 10965 11065 10915
3728 4028 4228 4328 4628 5028 5428
1225 1225 1225 1225 1225 1225 1225
2375 2525 2625 2675 2875 2575 2025
T
Y
Y
Theoretical Wheelbase
Center of Gravity for Payload (Min.)
Center of Gravity for Payload (Max.)
4041
-24
196
4241
3
233
4441
28
271
4841
80
345
5141
114
397
4800
5341
140
434
4900
5441
153
453
5200
5741
192
509
5600
6141
232
572
6000
6541
268
630
Chassis Weights [kg]
Front Axle
Rear Bogie
Kerb Weight
Payload (including body, driver, fuel, etc.)
4645 4645 4650 4655 4685 4685 4685 4690 4725 4765
2960 2985 3005 3070 3130 3155 3165 3205 3195 3165
7605 7630 7655 7725 7815 7840 7850 7895 7920 7930
18395 18370 18345 18275 18185 18160 18150 18105 18080 18070
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb
Turning Circle Diameter Wall to Wall
Plated Weights [kg]
Gross Vehicle Weight
Gross Combination Weight
Front Axle
Rear Bogie
14400 15000 15600 16800 17800 18400 18700 19600 20800 22000
15900 16500 17100 18300 19300 19900 20200 21100 22300 23500
Plated
Design
26000
44000
8000
19000
27000
44000
8000
19000
Important Notes
Chassis Dimensions
Cab Height: +416 mm for CAB-HSLP, +554 mm for CAB-XHSL.
Front Axle to Back of Cab: +424 mm for CAB-HSLP and CAB-SLP and CABXHSL.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 100 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down. Chassis height
used: CHH-HIGH.
Rear overhang used for vehicle weight calculation is the maximum rear
overhang (N Max.) for selected wheelbase.
Height change when chassis height CHH-MED,FRAME266: 0 mm.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres:
315/80R22.5
Drive Axle Tyres:
315/80R22.5
Trailing/Pusher Axle Tyres:
315/80R22.5
Chassis weight includes oil, water, AdBlue, 70 litres fuel and without
driver. Kerb weight can vary ± 3%.
Turning diameters are theoretically calculated. Tag axle used: TA-FIXED.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights,
ask your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Instructions and chassis assembly drawing FM62TR1HAX.
1 (7)
Ref: FM 62 TR1HAX01 GBR 2017-09-05 ENG
FMX11 6x2 Platform - Tag - Rear Air Suspension FM 62 TR1HAX
TRUCK USE
□ RC-ROUGH
□ RC-SMOOT
Operating class on/off road
Operating class highway
□
□
□
■
Garbage preparation
Swap body vehicle preparation
Tipper vehicle preparation
Basic platform vehicle
GARB-PRE
SWAPBODY
TIPP-PRE
UNIFORM
CORE COMPONENTS
□ CHH-HIGH
□ CHH-MED
□ TA-HYSBS
□ TAG-FIXD
■ TAG-FIXS
□ TAG-SSTE
■ RADT-GR
Rear air suspension, 2 axles - 1 driven/1 tag
■ FMX-DAY
Day cab - with steel safety cage design
Designed and built to Swedish impact and ECE R29
regulations
Globetrotter cab - with steel safety cage design
Designed and built to Swedish impact and ECE R29
regulations
Sleeper cab - with steel safety cage design
Designed and built to Swedish impact and ECE R29
regulations
□ FMX-SLP
Driving plus package
□ BEDFM
One bed resting package
□ AUDBAS
Audio basic: RDS radio with CD player, FM/AM antenna and
speakers in dashboard and doors.
High Power Audio system: RDS radio with CD player - also
playing MP3/WMA files from CD -, with integrated bluetooth
phone and USB/Line inputs. FM/AM antenna, speakers in
dashboard, doors, and sleeping compartment.
AM/FM Bluetooth radio without CD player.
USB and Aux line inputs.
Speakers in dashboard, doors, and sleeping compartment.
7” touch screen with personal apps.
AM/FM Bluetooth radio without CD player.
USB and Aux line inputs.
Speakers in dashboard, doors, and sleeping compartment.
7” touch screen with personal and professional apps.
Dynafleet vehicle on-board data display with office internet
support.
AM/FM Bluetooth radio without CD player.
USB and Aux line inputs.
Speakers in dashboard, doors, and sleeping compartment.
7” touch screen with personal and professional apps.
Truck based satellite navigation.
AM/FM Bluetooth radio without CD player.
USB and Aux line inputs.
Speakers in dashboard, doors, and sleeping compartment.
7” touch screen with personal and professional apps.
Truck based satellite navigation.
Dynafleet vehicle on-board data display with office internet
support.
□ AUDHIG
□ MEDIA
Chassis frame height standard 1020 -1150mm nominal above
ground level - subject to tyre size
For specific coupling or deck heights always check the unique
BEP chassis drawing
Chassis frame height medium - approx 900 to 1000mm
nominal above ground level - subject to tyre size
For specific coupling heights always check the unique BEP
chassis drawing
Electro-hydraulic steered tag axle, with steering lock out at
38kph
Fixed tag axle twin tyres (4 tyres on complete axle)
Fixed tag axle single tyres (2 tyres on complete axle)
Self steered tag axle - castor effect with no direct link to front
axle - on road aplications only
□ FMX-HSLP
□ DRIVEFM+
□ MEDIADF
□ MEDIANAV
□ MEDIANDF
□ VISIX15
Visibility package
□ ASAF15
New Active safety package
□ RCHAPAC1
Chassis Package Rigid
■ EU6SCR
Emission level - Euro 6
CHASSIS
■ D11K330
D11K330 10.8l engine developing 330hp at 16-1900rpm.
Peak torque 1600Nm at 950-1400rpm.
D11K370 10.8l engine developing 370hp at 16-1900rpm.
Peak torque 1750Nm at 950-1400rpm.
D11K410 10.8l engine developing 410hp at 16-1900rpm.
Peak torque 1950Nm at 1000-1400rpm.
D11K450 10.8l engine developing 450hp at 16-1900rpm.
Peak torque 2150Nm at 1000-1400rpm.
□ FST-AIR
■ FST-PAR
□ FST-PAR3
Front suspension type - air
Front suspension type - 2 leaf parabolic springs
Front suspension type - 3 leaf parabolic springs
□ FAL10.0
Front axle design capacity 10 tonnes - Ensure that you have
checked the tyre load index
Front axle design capacity 7.1 tonnes
Front axle design capacity 7.5 tonnes
Front axle design capacity 8.0 tonnes - Ensure that you have
checked the tyre load index
Front axle design capacity 8.5 tonnes
Front axle design capacity 9.0 tonnes - Ensure that you have
checked the tyre load index
□ D11K370
□ D11K410
□ D11K450
□ EBR-EPG
□ EBR-EPGC
□ EBR-VEB
Exhaust brake controlled by steering column switch
Exhaust pressure governor for I shift gearbox
Volvo engine brake and exhaust pressure governor retardation
300kW
■ AT2412F
AT2412F 12-speed "I-shift" automated mechanical gearbox
suitable for gross train weights up to 44tonne only
refer to sales engineering when used in conjunction with a
PTO
AT2612F 12-speed "I-shift" automated mechanical gearbox
suitable for gross train weights up to 60tonne only
refer to sales engineering when used in conjunction with a
PTO
ATO2612F 12-speed "I-shift" overdrive automated mechanical
gearbox
suitable for gross train weights up to 60tonne
refer to sales engineering when used in conjunction with a
PTO
Powertronic automatic 6-speed gearbox, max. engine torque
2100 Nm, max. permitted GCW 100000 kg
□ AT2612F
□ ATO2612F
□ PT2106
□ RSH1370F
■ RSS1356
□ RSS1360
RSH1370F hub reduction rear axle with differential lock design GCW 70 tonne
RSS1356 single reduction rear axle with differential lock design GCW 56 tonne
RSS1360 single reduction rear axle with differential lock design GCW 60 tonne
PACKAGES
□ DRIVEFM
Driving package
■ Standard Equipment
□ FAL7.1
□ FAL7.5
■ FAL8.0
□ FAL8.5
□ FAL9.0
■ FSTAB
□ FSTAB2
□ FSTAB3
Front anti-roll bar
Front anti-roll bar medium stiffness
Front stiff anti-roll bar
■
□
□
□
Rear bogie design capacity 19 tonnes
Rear bogie design capacity 20.5 tonnes
Rear bogie design capacity 22.5 tonnes
Rear bogie design capacity 23 tonnes
RAL19
RAL20.5
RAL22.5
RAL23
■ RSTAB2
□ RSTAB3
Rear anti roll bar medium stiffness
Rear stiff anti-roll bar
□
□
■
□
Rear axle load limiter, 10 tonnes
Rear axle load limiter, 10.5 tonnes
Rear axle load limiter, 11.5 tonnes
Rear axle load limiter, 9.5 tonnes
RALIM10
RALIM105
RALIM115
RALIM95
■ ASF-DL1
□ ASF-DL3
Air suspension with 1 driving level
Air suspension with 3 driving levels
□ ACTST-TO
Volvo Dynamic Steering (VDS) with with extra electronic pump
and torque overlay
■ PSS-SING
Single power steering system
■ PSP-FIX
□ PSP-VAR
Power steering pump with fixed displacement
Power steering pump with variable displacement
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
2 (7)
Ref: FM 62 TR1HAX01 GBR 2017-09-05 ENG
FMX11 6x2 Platform - Tag - Rear Air Suspension FM 62 TR1HAX
■ EBS-MED
EBS medium package including "hill" hold function
■ RST-AIR
□ RST-AIR4
Rear air suspension
■ FBREG-E
Front regulating brake valve, EBS
■ SUSPL-EC
Remote electronic control on wander-lead for air suspension
levelling
■ FRAME266
□ FRAME300
Frame rail section external height 266 mm
Frame rail section external height 300 mm
□ FST7070
■ FST8080
Frame thickness - web and flange 7.0mm
Frame thickness - web and flange 8.0mm
□
□
□
□
Inner liner from end of engine to end of bogie
Inner liner from end of engine to end of frame
Inner liner from gearbox member to end of bogie
Inner liner from gearbox member to end of frame
FIL-EEEB
FIL-EEEF
FIL-TXEB
FIL-TXEF
■ BBOX-L
Battery box located on left hand side
□ 2BAT210B
■ 2BATT170
□ 2BATT225
2 x 210 Ah capacity Gel batteries
2 x 170 Ah capacity batteries
2 x 225 Ah capacity batteries
■ BATTAMP
□ BATTIND
Battery voltage and ampere gauge
Battery charge indication
□ ADR2
ADR package for transportation of dangerous goods on road
(Note does NOT include safe loading pass package if required
this is quoted seperately)
□ MSWI-A
■ MSWI-C
□ MSWI-R
Main switch - ADR switch circuit shut down
Main switch - Chassis mounted toggle switch by battery box
Main switch - Key fob operated remote controlled
■ R330A71
Right aluminium 710 mm D-shaped fuel tank, 330 litres volume
Min volume 255l
Max volume 885l
■ UL-FUEL
Without left fuel tank
Min volume 160l
Max volume 730l
□ ADTP-L
■ ADTP-R
AdBlue tank on left hand side
AdBlue tank on right hand side
□
■
□
□
□
AdBlue tank usable volume 48 litres
AdBlue tank usable volume 64 litres
AdBlue tank usable volume 68 litres
AdBlue tank usable volume 90 litres
AdBlue tank usable volume 100 litres
ADB048
ADB064
ADB068
ADB090
ADB100
□ ADTC-BF
AdBlue tank cover with satin alloy look decorative cover
■ FCAP-L
Locking fuel filler cap
■ FUFF-AS
□ FUFF-ATS
Fuel filling anti-spillage device
Fuel filling anti-theft and anti-spillage devices
□
■
□
□
ESH-LEFT
ESH-REAR
ESH-RIGH
ESH-VERT
Horizontal silencer, left exhaust outlet
Horizontal silencer, rear exhaust outlet
Horizontal silencer, right exhaust outlet
Horizontal silencer, vertical exhaust outlet
□ CHAIN-S
Snow chains
□ HOOK-SC
Snow chain hooks
■ TOWF-HD1
One heavy duty front towing device
□
□
□
□
□
Towing member, high mounted in centre of frame, D = 190
Towing member, low mounted under the frame
Towing member, low and forward mounted under the frame
Towing member, low and far forward mounted under the frame
Towing member, medium mounted in line with frame lower
flange
TOWMBRH
TOWMBRL1
TOWMBRL2
TOWMBRL3
TOWMBRM
□ RFEC-L
■ RFEC-S
□ RFEC-U
Rear frame end, lower flange cut for centre axle drawbar.
Rear frame end, straight cut for regular platform applications
Rear frame end, upper cut for tipper applications.
□
□
□
□
Towing coupling, Ringfeder 4040 G-150
Towing coupling, Ringfeder 5055 G-150
Towing coupling, Rockinger 400 G-150 for 40mm eyes
Rockinger RO 50 50mm for centre axle trailer
C-RI4040
C-RI5055
C-RO400G
C-RO50
□ TOWR-ONE
Towing hitch attached to rear crossmember
■
□
□
□
□
Trailer electrical preparation kit - chassis/cab wiring
Single 14 pole electrical trailer connector
Single 15 pole electrical trailer connector - ADR certified
7 pole - 24N trailer electrical suzie
24N and 24S trailer electrical suzies
TREL-PK
TREL14
TREL15
TREL7
TREL7-7
□ TBC-DUO
□ TBC-EC
Duomatic type air line connectors
Palm coupling type air line connectors
□ TRBR-HCF
□ TRBR-STA
Full pressure hand controlled trailer brake
Stationary trailer brake control
□ TRB-STRE
Stretch Brake - Automatic low speed trailer brake activation to
avoid jack-knifing and improve steerability
□ RUP-FOLD
□ RUP-FOSL
Folding EC approved aluminium rear underrun
Folding & sliding EC approved aluminium rear underrun
□ RFEND-B
□ RFEND-T
Three piece EC approved rear mud wings and spray flaps
Rear mud wings, transport mounted
□ RFH-BAS
□ RFH-HIG
□ RFH-LOW
Basic rear wing height
High rear wing height - higher wing tops
Lower rear wing height - shallower wing tops
□ AUXATNK
Auxiliary airtank
□ ATANK-AL
■ ATANK-ST
Aluminium air tanks
Steel air tanks
□ RESTS-W
White conspiciuty markings on chassis - sideguards, toolbox
and rear overhang
□ REST-RUP
■ TL-LED
LED Tail lights
□ BLIGHT-E
Emergency brake light
WHEELS & TYRES
□ RT-AL
■ RT-STEEL
Alcoa brushed aluminium rims with standard holes for long
stud fixing on all axles
Alcoa Dura-Bright EVO aluminium rims with standard holes
long stud fixing on all axles, requires cleaning with a ph neutral
solution - washing up liquid.
Alcoa Dura-Bright EVO aluminium rims with countersunk holes
for short stud fixing on all axles, requires cleaning with a ph
neutral solution - washing up liquid.
Alcoa brushed aluminium rims with countersunk holes for short
stud fixing on all axles
Steel rims on all axles
□ WCAP
Aerodynamic hub caps
Bridgestone ECOPIA H - Fuel tyre Recommendation 1
Continental ECOPLUS HS3/HD3 - Fuel tyre Recommendation
2
FUEL EFFICIENCY CLASS A Continental Efficient Pro S/D Fuel Tyre Recommendation 3
□ EXST-SSP
□ EXST-ST
Stainless steel exhaust stack - NOT polished
Steel exhaust stack
□ RT-ALDP
□ HS-NAR
Narrow heat shield
□ RT-ALDPD
□ WHC-FIX2
□ WHC-FOL2
Two fixed wheel chocks
Two foldable wheel chocks
□
□
□
□
Wheel chock(s) stored in the front part of the vehicle
Wheel chock(s) stored in the middle part of the vehicle
Wheel chock(s) stored in the rear part of the vehicle
Transport mounted wheel chock(s) stored in cab outer luggage
locker
WHCP-F
WHCP-M
WHCP-R
WHCP-T
□ RT-ALDU
□ TB-L80
Toolbox 800 mm, left side
□ BRREC001
□ COREC002
□ TB-R80
Toolbox 800 mm, right side
□ COREC003
□ SUP-BAS
EC approved chassis side guards
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
3 (7)
Ref: FM 62 TR1HAX01 GBR 2017-09-05 ENG
FMX11 6x2 Platform - Tag - Rear Air Suspension FM 62 TR1HAX
□
□
□
□
□
□
□
Good Year FUELMAX S/HL/D - Fuel tyre Recommendation 1
Good Year FUELMAX S/D - Fuel tyre Recommendation 2
Good Year FUELMAX S/(O)/D - Fuel tyre Recommendation 3
Michelin XFA2/X-LINE Energy - Fuel tyre Recommendation 1
Michelin XZA2/X-LINE Energy - Fuel tyre Recommendation 2
Michelin X-LINE Energy - Fuel tyre Recommendation 3
FUEL EFFICIENCY CLASS A Michelin X Line Energy F/D2 Fuel Tyre Recommendation 4
□ FUEFE2LW
■ FUEFE2SW
Large engine mounted dual fuel filter with water separator
Small engine mounted dual fuel filter with water separator
□ EST-AID
Air inlet manifold starting heater element
□ 220EBH15
220V/1.5Kw electric engine block heater
□ SPWT-D
□ SPWT-F
Spare wheel & tyre with rear tyre pattern
Spare wheel & tyre with front tyre pattern
□ PTER1400
□
□
□
□
Spare wheel carrier on left side of chassis ahead of rear axle
Rear mounted spare wheel carrier
Spare wheel supplied temporarily strapped to chassis
Temporary spare wheel carrier on top of chassis frame
GYREC001
GYREC002
GYREC003
MIREC001
MIREC002
MIREC003
MIREC004
SWCP-LF
SWCP-R
SWCP-T
SWCP-TP
□ PTER-100
□ PTER-DIN
□ HPE-F101
□ HPE-F41
□ HPE-F51
□ JACK-12T
□ JACK-15T
□ JACK-20T
12 tonne bottle jack
15 tonne bottle jack
20 tonne bottle jack
■ TOOL-BAS
□ TOOLKIT
Basic Toolkit
Complete tool kit
□ HPE-T53
□ INFLAHOS
Tyre inflation hose
□ HPE-T70
□ GAUGE-TP
Tyre pressure gauge
□ OBDEP-C
Euro 6 Step C emission level
□ HPE-F61
□ HPE-F81
□ HPE-V45
□ HPE-V75
DRIVELINE EQUIPMENT
□ TRAP-HD
Reinforced gearbox application
□ PVT-EXT
I-See Predictive Cruise Control with shared data cloud
information
□ PTPT-F
□ TP-CON
□ TP-DIST
□ TP-LONG
Construction Package
Distribution Package
Long Haul Package
□ PTR-D
□ PTR-DH
□ AMSO-AUT
Enhanced I-shift software with manual shift available in auto
mode and kickdown facility on accelerator pedal
□ AVO-ENH
Enhanced software for off road driveability and starting
□ APF-ENH
I-shift enhanced PTO functions
□ CD40B-O
■ CS43B-O
Twin plate 394mm (16") clutch
Single plate 430mm (17") clutch
□ PTRD-D1
□ RET-TH
□ RET-TPT
Gearbox mounted retarder
Hydraulic Retarder for Powertronic gearbox
□ PTRD-D2
□ TC-HWO
□ TC-MAOH2
Automatic gearbox oil cooler - water to oil
Extra high performance transmission oil cooler - air to oil with
front mounted radiator
Basic transmission oil cooler - water to oil
High performance transmission oil cooler - water to oil
Transmission oil cooler for retarder - air to oil
Transmission oil cooler for retarder - water to oil
□
□
□
□
TC-MWO
TC-MWOH2
TC-RAO
TC-RWO
□ 2COM1100
■ 2COMP900
Two cylinder, air compressor, 1100 litres per minute
Two cylinder, air compressor, 900 litres per minute
□ CLU-AIRC
Clutchable air compressor
■ AIRIN-HI
□ AIRIN-LO
Roof mounted air intake behind cab on left hand side
Low level air intake behind cab on left hand side
□ ACL1ST-S
Two stage air filter
■ 24AL110B
□ 24AL120B
□ 24AL150B
110 amp alternator
120 amp alternator
150 amp alternator
■ CCV-C
□ CCV-O
□ CCV-OX
Closed crankcase engine ventilation
Open crankcase engine breather
Closed crankcase ventilation for cold markets
■ PRIM-EL
□ PRIM-MAN
Electrical priming pump
Manual priming pump
□ FUEQ-EH
Fuel line electric heater
□ PTPT-D
□ PTR-DM
□
□
□
□
PTR-F
PTR-FH
PTR-FL
PTRD-D
□ PTRD-F
□ HPG-F101
□ HPG-F41
□ HPG-F51
□ HPG-F61
□ HPG-F81
Parker F1-101,engine mounted, fixed displacement, single
flow, engine mounted hydraulic pump
Parker F1-41, engine mounted, fixed displacement, single flow,
engine mounted hydraulic pump
Parker F1-51, engine mounted, fixed displacement, single flow,
engine mounted hydraulic pump
Parker F1-61, engine mounted, fixed displacement, single flow,
engine mounted hydraulic pump
Parker F1-81, engine mounted, fixed displacement, single flow,
engine mounted hydraulic pump
Parker F2-53/53, engine mounted, Fixed displacement, Twin
flow engine mounted hydraulic pump
Parker F2-70/35, engine mounted, Fixed displacement, Twin
flow engine mounted hydraulic pump
Parker VP1-45, variable displacement, single flow, engine
mounted hydraulic pump
Parker VP1-75, variable displacement, single flow, engine
mounted hydraulic pump
Powertronic PTO, 1 front/upper DIN connection for plug-in
pump (max. 850 Nm)
Powertronic PTO, 1 front/upper rear facing SAE flange conn.
for prop shaft (max.850 Nm)
Gearbox PTO for plug-in pump, 0.71xeng speed
Gearbox driven high speed PTO for one plug-in hydraulic
pump
Gearbox driven medium speed PTO for one plug-in hydraulic
pump
Gearbox driven PTO with rear flange connection
Gearbox driven high speed PTO with SAE drive flange
Gearbox driven low speed PTO with SAE drive flange
Gearbox driven HIGH SPEED PTO for two plug-in hydraulic
pumps
PTRD-D1 Gearbox driven HIGH SPEED PTO (1 SAE flange &
1 plug-in hydraulic pump)
Gearbox driven HIGH SPEED PTO (2 SAE flanges & 1 plug-in
hyd pump)
PTO with 1 DIN + 1 flange connection rear, manual gearbox
Parker F1-101 gearbox mounted, fixed displacement, single
flow, hydraulic pump
Parker F1-41 gearbox mounted, fixed displacement, single
flow, hydraulic pump
Parker F1-51 gearbox mounted, fixed displacement, single
flow, hydraulic pump
Parker F1-61 gearbox mounted, fixed displacement, single
flow, hydraulic pump
Parker F1-81 gearbox mounted, fixed displacement, single
flow, hydraulic pump
□ EIDLESD
Engine idle shut down
■ DRC-AMII
DPF Regeneration control switch - for manual and switching off
regeneration
□ STWPOS-L
■ STWPOS-R
Left hand drive
Right hand drive
□ STWM-LE
Leather steering wheel
□ STGW-AD2
■ STGW-ADJ
Adjustable steering wheel with neck tilt
Adjustable steering wheel
■ AIRBAG
SRS Driver's air bag
■ 1DAYDIG
Continental VDO DTCO 2.2 digital tachograph
This tachograph can ONLY offer remote download if the option
of
Dynafleet or an FMS gateway has been specified with this
□ AF-R
■ Standard Equipment
Rear engine mounted PTO with DIN5462 (female) splined
shaft for a close coupled pump
Rear engine mounted power-take-off with SAE 1410 flange
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
4 (7)
Ref: FM 62 TR1HAX01 GBR 2017-09-05 ENG
FMX11 6x2 Platform - Tag - Rear Air Suspension FM 62 TR1HAX
□ 1DAYDIG2
order.
Continental VDO DTCO 2.2 digital tachograph
This tachograph can ONLY offer remote download if the option
of
Dynafleet or an FMS gateway has been specified with this
order.
□ UPHTRI10
■ UPHTRI11
Seats: Black embossed textile insert with light grey sides, black
vinyl side bolster with blue vinyl side insert.
Interior trim: Raven black bunk and curtains & blue textile side
walls
Seats: Light grey embossed textile insert, black raven metallic
vinyl bolster with red vinyl side insert.
Interior trim: Raven black bunk and curtains & grey vinyl side
walls
Seats: Blue soft textile insert, black vinyl bolster.
Interior trim: Raven black bunk and curtains & blue textile side
walls
Seats: Dark grey leather insert and black leather bolster.
Interior trim: Raven black bunk and curtains & grey vinyl side
walls
Seat: Dark grey leather insert and black leather bolster.
Interior trim: Raven black bunk and curtains & blue textile side
walls
□ ARSL
Additional road speed limit - switch in dashboard
□ SPEED-DU
Dual speed limiter
□ UPHTRI12
□ CRUIS-E
■ CRUISEC
Eco cruise control (with eco-roll and I-cruise, controls in
steering wheel)
Cruise control, standard
□ UPHTRI13
■ ESP-BAS1
Electronic Stability Control
□ HWSS-ACB
■ HWSS-FCB
Adaptive cruise control with forward collision warning and
emergency braking
Forward collision warning with basic cruise control and
emergency braking
■ LSS-DW
Lane keeping warning system
□ LCS
Lane change support
□ DAS-W
Driver Alert Support system
□ SBD-RED
Red seat belts
□ RSENS-W
Rain sensing windscreen wipers
□ SBPRE-DS
Driver seat belt pretensioner
□ CU-ECC
□ CU-ECC2
■ PST-BAS1
■ CU-MCC
Electrically controlled air conditioning with sun sensor
Electrically controlled air conditioning with sun sensor, mist
sensor, air quality sensor and carbon filter
Climate unit with manual controlled air conditioning
■ IMMOBIL
Thatcham H2 approved immobiliser
□ ALARM-B
□ ALARM-E
Thatcham H1 approved vehicle alarm - Cab only
Enhanced vehicle alarm - Thatcham H1 approved - Cab plus
external sensor for body/trailer
□ ALCOLOCK
Alcolock
Passenger seat - Fixed non suspended fold up with seatbelt
mounted in cab
Bench passenger seat
Passenger seat - Comfort suspended with seatbelt mounted in
seat
Passenger seat - Comfort suspended & heated with seatbelt
mounted in seat
Passenger seat - Fixed non suspended with seatbelt mounted
in cab
Passenger seat - Standard suspended with seatbelt mounted
in cab
□ PHONE-PK
Telephone preparation kit (antenna, antenna attachm. cable
incl.)
Electrical window lift, automatic up/down driver side
Electrical window lift
Mechanical window lift
□ ISUNS-BS
■ ISUNS-DS
Side interior sun visor on both sides
Driver's side interior sun visor
■
□
□
□
Interior front sun visor without mirror
Interior front sun visor with mirror on driver side
Electrically operated textile interior sun blind
Manually operated textile interior sun blind
□ ADFS
■ DST-CF4
□ DST-CF5
□ DST-CF6
□ PST-BENC
□ PST-CF4
□ PST-CF5
□ PST-STD2
□ PST-STD4
□ WLIFT-AD
■ WLIFT-EB
□ WLIFT-ME
ISUNF-B
ISUNF-MD
ISUNF-RE
ISUNF-RM
□ UPHTRI14
Two extra DIN slots in front shelf - can be fitted with card or
drawer available as an accessory
■ BUPALARM
Reverse alarm
□ BUPMON
Back up monitor with built in 7" screen on dash and one colour
camera supplied loose for fitment by bodybuilder.
□ RTOLL-PK
Road toll PREPARATION kit for trucks operating with "Toll
Collect" in Germany
□ LOADIND
Load indicator with central dashboard display
□ REMC-MF
Multi-functio wireless remote control
□ FIREXT3S
3kg fire extinguisher mounted on seat base
□ WARNVEST
High visibility warning vest - no sleeves
□ AIDKIT
□ AIDKIT1B
First aid kit
First aid kit
Driver seat, comfort, suspended, belt in seat
Driver seat, comfort, suspended, belt in seat, electrically
heated
Driver seat, comfort, suspended, belt in seat, electrically
heated, ventilated
□ SBPRE-PS
Passenger seat belt pretensioner
□ ARM-DBPS
Two armrests on driver seat and one (outer) on passenger
seat
Two armrests on both driver and passenger seat.
Two armrests, on driver seat only
Two armrests, on passenger seat only
Single armrest (next to driver) on passenger seat
□
□
□
□
ARMRE-BB
ARMRE-DB
ARMRE-PB
ARMRE-PS
□ ARU-BAS
□ ARU-LEA
Vinyl upholstered armrest
Leather upholstered armrest
■
□
□
□
Rubber floor mats, extended
Rubber floor mats
FMAT-RU2
FMAT-RUB
FMAT-T2E
FMAT-TX2
Textile and rubber floor mats
□ LBK-RES
□ LBK70
■ ULBK
Foldable rest bunk
Lower bunk 700 x2000 mm, fixed
Without lower bunk
□ MATL-FI
□ MATL-SF
Firm lower bunk pocket sprung mattress
Lower flexizone mattress - semi-firm, pocket springs up to
100kg - 16 stone
Lower flexizone mattress - soft, pocket springs up to 85kg 13.5 stone
□ MATL-SO
□ OLMAT-BA
□ OLMAT-PR
35mm mattress overlay protector
50mm premium mattress overlay protector
□ TBK60F
□ TBK70F
Fixed foldable top bunk 600 x 1900mm
Fixed foldable top bunk 700 x 1900mm
□ WARNLAMP Portable warning lamp
□ PH-CAB2
□ PH-ENGCA
□ PH-SS
1.8kW Air to air night heater
Engine and cab night heater
Short stop heater
□ LAMP-IN
Inspection lamp
□ SLCP-BAS
□ BULBKIT
Bulb and fuse kit
Basic sleeper control panel - includes interior light, parking
heater, roof hatch and door lock
□ WRITEPAD
Writing pad
□ SAFE
Safe box for driver's personal items
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
5 (7)
Ref: FM 62 TR1HAX01 GBR 2017-09-05 ENG
FMX11 6x2 Platform - Tag - Rear Air Suspension FM 62 TR1HAX
□ ETSB-F
□ ETSB-FR
□ ETSB-FRS
□ ETSB-FS
□ ETSB-R
□ ETSB-RS
□ ETSB-S
□ RUS-BAS
□ RUS-HIG
Storage on engine tunnel - on front top
Storage on engine tunnel - on front top and at rear cab wall
Storage on engine tunnel - on front top & at rear cab wall &
storage recessed into tunnel on right hand side
Storage on engine tunnel - on front top and storage recessed
into tunnel on right hand side
Storage on engine tunnel - box at rear cab wall
Storage on engine tunnel - at rear cab wall and storage
recessed into tunnel on right hand side
Storage on engine tunnel - recessed into tunnel on right hand
side
□ AD-ROOFB
Roof air deflector with light box
□ AD-SIDEL
□ AD-SIDES
Side air deflector extension panels
Short cab side air deflector for rigid bodywork
■ HL-BAS2
□ HL-BASIC
□ HL-BHID2
Halogen H1 head lamps
Halogen H7 head lamps
Dynamic high intensity Bi-Xenon head lamps
These follow the steering movement and direction of the truck
□ HL-CLEAN
Head lamp cleaner - washer jets
□ HLP-ST
Headlamp protection
Rear cab upper storage 154 litres - 300 mm high
Rear cab upper storage 245 litres - 440 mm high
□ HL-ADJ
Adjustable headlights with switch in the cab
□ ASL-RF2
Two Hella H11 70W spotlamps in sign box - only available with
the basic headlight and no lower driving lights.
Preparation kit for two spotlamps in sign box
□ TABLE
Folding and height adjustable table - on lower bunk
□ REF-ICPK
□ REFR-RUS
Refrigerator preparation kit, engine tunnel mounted
28 litre rear upper wall mounted refrigerator with deviders
□ BOTH-D
One bottle holder under dashboard centre section
□ COFMA-PK
Coffee maker, preparation kit.
■ INLI-BAS
□ INLI-NL
□ INLI-NLD
Basic white interior lights
Interior white and red night light with no dimmer
Interior white and red night light with dimmer function
□ ARL-FLEX
Two flexible reading lamps (snake lamps)
□ CABPT-R1
■ CABPT-R2
Single outlet for roof mounted accessories
Twin outlets for roof mounted accessories.
□ RH-ECS
□ RH-MSR
■ URH
Glass roof hatch - Electrically operated
Steel roof hatch - Manually operated with rear opening
Without roof hatch
□ SPOTP-F
□ SPOTP-R
□ SPOTP-RF
Spotlamp preparation in front, max 280W
Spotlamp preparation on roof, max 280W
Spotlamp preparation on cab roof and in cab front, max
2x280W
□ SWIND-BS
□ SWIND-PS
Extra side window on both sides behind "B" pillar
Rear side window, passenger side
□ ROS-IL
Globetrotter roof sign illuminated
□ VANMIR
Vanity mirror in front shelf
□ CSGN-FMX
Cab sign - FMX decal in the cab roof sign area
■ HORN-F1S
□ HORN-R2S
Single tone Jericho air horn chassis mounted
Two roof mounted air horns
□ ANT-CBR
Roof mounted antenna for CB radio, single aerial
□
□
□
□
□
□
Front roof mounted accessory bracket
Front & middle roof mounted accessory brackets
Front & rear roof mounted accessory brackets
Middle roof mounted accessory bracket
Rear roof mounted accessory bracket
Rear & middle roof mounted accessory brackets
□ AS-FUS
Extra shelf in front upper storage compartments
□ INFOT-PK
Preparation kit for the mounting of a flat screen TV in cab
above the driver's door, includes bracket, electrical and
speaker connections
CAB EXTERIOR
□ ASL-RFPK
□ BEACOA2F
□ BEACOA2R
□ BEACON-P
□ BEACONA4
ACCBR-F
ACCBR-FM
ACCBR-FR
ACCBR-M
ACCBR-R
ACCBR-RM
Two front roof mounted amber beacon rotating warning lamps
Two rear roof mounted (on accessory bracket) amber beacon
flashing warning LED lamps
Roof beacon wire preparation
Four roof mounted (2 front/2 rear) amber beacon rotating
warning lamps
■ PAICS-B
Basic cab paint - mirrors, sunvisor,instep and bumper supplied
in natural finish - grey
■ GLAS-TIN
Tinted windows.
□ AWIND-RF
Rear window
□ DGLAS-L
Laminated door glass
■ LOCK-MAN
□ LOCK-MRP
SUPERSTRUCTURE PREPARATIONS
□ LOCK-REM
Manual door locking
Manual door locking with internal remote control (from driver
side) of passenger door
Central locking with remote control
■ BUMP-HD
Heavy duty front bumper
□ SW745-FE
□ GUARD-EH
Engine guard to protect sump and engine hoses
■ BUGNET
Insect screen in front of radiator
□ CTILTP-E
■ CTILTP-M
Electrically operated hydraulic cab tilt
Manually operated hydraulic cab tilt
□ SW745-HE
□ FCABS-A
■ FCABS-M
Front cab - Air suspension
Front cab - Mechanical spring suspension
□ SW782-ME
□ RCABS-A
■ RCABS-M
Rear cab suspension - Air
Rear cab suspension - Mechanical spring
□ MIRCOMFX
Electrically heated and operated exterior mirrors with wide
angle mirror on both sides and kerb view mirror on passenger
side
Electrically heated exterior mirrors with wide angle mirror on
both sides and kerb view mirror on passenger side
■ MIRSTDX
■ AMIR-F20
Auxiliary front view mirror with a 200mm radius
□ SUNV-H
External smoke grey sunvisor
□ AD-ROOF
Roof air deflector
■ Standard Equipment
□ REFS-CW
□ REFS-TW
□ REFS-TY
□ SW745-EE
□ SW745-GE
□ SW782-OE
White cab conspicuity markings mounted on cab side
White cab conspicuity markings by packed in cab
Yellow cab conspicuity markings by packed in cab
Swapbody equipped with front stop block for wheelbase 4600
mm and body length 7150/7450 mm. Height 130 mm above
frame.
Swapbody equipped with front stop block for wheelbase 4800
mm and body length 7150/7450 mm. Height 130 mm above
frame.
Swapbody equipped with front stop block for wheelbase 4600
mm and body length 7150/7450 mm. Height 190 mm above
frame.
Swapbody equipped with front stop block for wheelbase 4800
mm and body length 7150/7450 mm. Height 130 mm above
frame.
Swapbody equipped with front stop block for wheelbase 4900
mm and body length 7150/7450/7820 mm. Height 130 mm
above frame.
Swapbody equipped with front stop block for wheelbase 4900
mm and body length 7150/7450/7820 mm. Height 190 mm
above frame.
□ CROSSRE
Cross reinforcement for swapbody
□ SRWL-PK
Wiring preparation for side & rear work/reverse lamps on side
of chassis and a three-position switch, maximum 280W
Two H3 70W white front chassis mounted (LH/RH side)
working lamps and a 2-position switch (On/Off)
Two H3 70W white rear chassis mounted (LH/RH side)
working lamps and a 2-position switch (On/Off)
□ SWL-2FW
□ SWL-2RW
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
6 (7)
Ref: FM 62 TR1HAX01 GBR 2017-09-05 ENG
FMX11 6x2 Platform - Tag - Rear Air Suspension FM 62 TR1HAX
□ SWL-4W
□ SWL-PK
□ WLC-H2A
□ WLC-H2W
□ WLC-PKCH
□ WLC-PKH
□ WLC-PKL
□ WLC-PKLH
4 H3 70W white front (2) & rear (2) chassis mtd (LH/RH side)
working lamps & 2-pos switch (On/Off)
Wiring preparation for side work/reverse lamps on side of
chassis
and a three-position switch, maximum 280W
Two H3/70W working lamps with amber coloured lens high
mounted back of cab
Two H3/70W white working lamps high mounted on the back of
cab
Preparation kit (cables and switch) for cab mounted chassis
working lamp
Preparation kit, cables and switch for high mounted working
lamps back of cab
Preparation kit, cables and switch for low mounted working
lamps back of cab
Preparation kit - cables and switch for low and high mounted
working lamps back of cab.
□ ECBB-BAS
■ ECBB-HIG
Body builder electrical centre without body builder module
Body builder electrical centre with body builder module
□ BBCHAS1
□ BBCHAS3
One 7-pole connector for Body builder interface
Three 7-pole connectors for Body builder interface
□ BEPR-T2
Body builder electrical software preparation for tipper with
remote control
□ TD-BAS
■ TD-LED
Trailer detection WITHOUT LED sensing
Trailer detection with LED sensing
□ FRFS-BS
Frame rail free space on both sides to give space for crane
legs or other equipment.
□ FBA-BTF
□ FBA-BTSF
Lower front body attachments for torsionally flexible - platform
body
Lower front body attachments for torsionally semi-flexible body
- box or curtainsider
□ HBA-FSFB
□ HBA-SB
Holes for body attachments - flexible/semi-flexible body
Holes for body attachments - stiff body
□ RBA-T2
Lower rear body attachments for helper frame
□ CRANEPK1
Crane plates mounted to frame, for cranes up to 10 tonne
metre capacity
Crane plates mounted to frame, for cranes up to 20 tonne
metre capacity
Crane plates mounted to frame, for cranes up to 40 tonne
metre capacity
□ CRANEPK2
□ CRANEPK4
□ AUXL-SPK
Electrical preparation kit - wiring and switch for snow plough
lights
□ TAILPRE2
□ TAILPREP
Tail lift preparation kit, wireless remote operation
Taillift preparation kit - cab switch and warning in driver display
□ AESW2
Two Body builder bistable electrical switches (marked AUX1 /
AUX2)
2 Body builder bistable el.switches (marked AUX1/AUX2) and
prep. for 4 more switches
□ AESW2PK
□ AUXSW-4
Wiring for 4 extra switches (from Body builder electrical centre
to switch positions)
DELIVERY SERVICES
□ TGW-3GWL
Telematics gateway with GSM/GPRS/3G modem and wireless
lan WLAN
□ FMS-PK
Fleet Management System gateway
□ DRUT
"My Truck App" Two years subscription to driver utility
application
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
7 (7)
Ref: FM 62 TR1HAX01 GBR 2017-09-05 ENG
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement