AT-7000-EUR Advanced Wire Tracer

AT-7000-EUR Advanced Wire Tracer
www.Beha-Amprobe.com
www.Beha-Amprobe.com
AT-7000-RE
Receiver
AT-7000-EUR
Advanced Wire Tracer
Wire Tracing Reinvented
Get accurate results in minutes with new features and technologies
that simplify wire tracing and breaker identification. The Receiver’s
patented Smart Sensor,™ with its innovative new antenna design and
advanced signal processor, clearly displays the location and orientation
of energized wires in walls, floors and ceilings on the large color TFT
LCD screen. The powerful Transmitter utilizes two optimal frequencies
for both energized and de-energized wire and breaker tracing,
delivering consistently accurate results for novice users and experts
alike. The new Scan and Locate feature clearly identifies the one
correct breaker or fuse, eliminating the confusion from multiple false
positive readings common in older technology tracing tools.
AT-7000-TE
Transmitter
AT-7000-EUR Features
•• Traces wires in walls, ceilings,
floors and corners
Tip Sensor
•• Locates breakers and fuses
User friendly UI
and help screens
in 14 languages*
•• Pinpoints shorts and opens
•• High resolution 8.89 cm (3.5 in)
TFT LCD color display
Smart Sensor™
(Back)
•• Three power modes
––”High”power mode for normal
circuits
––”Low”power mode for precision
tracing in difficult areas
––”Clamp” power mode provides a
boosted signal using signal clamp
Large bright TFT
LCD full color
display
Non-Contact
Voltage (NCV)
•• Two automatically selected
frequency modes for optimal
tracing on energized and
de-energized circuits
Signal sensitivity
adjustment (-/+)
Enter key for
selecting functions
• Signal booster rechargeable
battery pack (BR-7000-T)
increases transmitter
signal strength
4-way
navigation
keys
• Clamp-on attachment
(SC-7000-EUR) for inducing signal
into wires without access to bare
conductors
Insulation stick
attachment
• Embedded help screens make
set-up easy and error free
AT-7000-RE Receiver
*UI (user interface) in 14 languages:
English
Deutsch
Français
Español
Italiano
Czech
Finnish
Dutch
Norsk
Polski
Portugués
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
Russian
Slovak
Swedish
©2014 Beha-Amprobe® 13310-eng
www.Beha-Amprobe.com
AT-7000-EUR Features and Functions
Tip Sensor
Smart Sensor™
Power Mode
Buttons (High,
Low, Clamp)
AT-7000-RE
Receiver
AT-7000-RE
Receiver
Tip Sensor
The shape of the tip sensor allows tracing in
hard to reach areas, corners & tight spaces,
as well as precise circuit breaker and fuse
identification. By utilizing two different
types of antennas (inductive coil and
capacitive), the tip sensor enables optimal
tracing results of both energized and deenergized circuits, which are automatically
selected by operating mode.
Smart Sensor™
Quickly and easily determine the precise
direction and location of energized wires in
walls, floors and ceilings with the patented
Smart Sensor™. Combined with a fast signal
processor that measures small changes in the
detected signal multiple times per second,
this new technology provides unmatched
precision and ease of use for tracing
energized wires.
Signal Clamp
SC-7000-EUR
Signal Clamp
When there’s no access to bare conductors,
use the SC-7000-EUR signal clamp to induce a
signal into either energized or de-energized
circuits for wire tracing and load locating.
The AT-7000-TE transmitter’s “clamp” mode
provides a boosted 6 kHz signal through
the clamp to further improve accuracy and
performance.
AT-7000-TE
Transmitter
AT-7000-TE Transmitter
Featuring three power modes “high”,
“low”, and “clamp” and two output
frequencies (6kHz and 33 kHz), the
AT-7000-TE incorporates the best
technologies available for optimal wire
tracing and breaker identification on
both energized and de-energized circuits.
The AT-7000-TE automatically sets the
frequency based on detected voltage, and
prompts the user to set the power level
based on their application. The color TFT
LCD screen displays the detected voltage,
frequency output and power mode.
The AT-7000-EUR Advanced Wire Tracer is available in two feature-packed kits
Features
AT-7020-EUR Kit
AT-7030-EUR Kit
Traces Energized and De-Energized Wires
⚫
⚫
Locates Energized and De-Energized Breakers
⚫
⚫
Pinpoints Shorts and Opens
Three Power Modes
•• ”High” power mode for normal circuits
•• ”Low” power mode for precision tracing in difficult areas
•• ”Clamp” power mode provides a boosted induction signal via the signal clamp
⚫
⚫
⚫
⚫
⚫
⚫
Signal Booster Rechargeable Battery Pack (BR-7000-T)
•• Longer life LI-ION battery
•• Recharges when AT-7000-TE transmitter plugged into energized circuit
•• Improved signal for open and energized tracing
•• Boosted signal when in “Clamp” mode
(optional)
⚫
Signal Clamp (SC-7000-EUR)
•• Clamp-on attachment for inducing signal into wires without access to bare conductors
(optional)
⚫
Two Frequency Modes for Optimal Tracing
•• 6 kHz for energized circuits
•• 33 kHz for de-energized circuits
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2014 Beha-Amprobe® 13310-eng
www.Beha-Amprobe.com
AT-7000-EUR Features and Functions
Quick and Easy Wire Tracing with the Smart Sensor™
Tracing Wires in Walls, Ceilings and Floors
Tracing wires can be a challenge. The Beha-Amprobe AT-7000-EUR makes tracing energized wires easier and more
accurate than ever before. The Smart Sensor’s™ patented sensor array and advanced signal processor provides
instant feedback of wire location and direction on the large TFT LCD color display. Easily determine the direction and
orientation of wires in walls, floors and ceilings up to 5 cm /2 in accuracy even on circuits protected by RCDs..
RCD
Energized
wire
AT-7000-RE
Receiver
Large dynamic TFT LCD color display
guides you in the direction and
orientation of the energized wire.
Display shows when the
Smart Sensor™ is centered over the
location of the energized wire and
indicates its precise direction and
orientation.
AT-7000-TE
Transmitter
Clear and Accurate Breaker Identification
Identifying breakers and fuses
Combined with our powerful transmitter utilizing optimal frequencies for energized and de-energized tracing, the new
Scan and Locate feature identifies the one correct breaker or fuse with the highest recorded signal. This eliminates the
confusion from multiple false positive readings common in older technology tracing tools.
AT-7000-RE
Receiver
The solid green arrow and audible alert
indicates the target breaker has been found.
AT-7000-TE
Transmitter
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2014 Beha-Amprobe® 13310-eng
www.Beha-Amprobe.com
AT-7000-EUR Features and Functions
Trace Wires Inside Conduit
Trace energized and de-energized wires enclosed in metal
conduit by removing the junction box cover and using the
AT-7000-RE Receiver’s Tip Sensor to identify the specific
wire carrying the transmitted signal generated by the
AT-7000-TE Transmitter. Wires in non-metal conduit can
be traced directly without opening the junction box and
using the AT-7000-RE Receiver’s Smart Sensor™.
Trace energized or de-energized wires by removing the junction box cover.
Trace energized wires without access
to exposed conductors
The SC-7000-EUR signal clamp accessory can be used
with the AT-7000-TE Transmitter to induce a signal into
energized and de-energized wires when there is no access
to bare conductors. Simply clamp around the desired wire
to induce the signal, then begin tracing.
Induce signal with the signal clamp when there is no bare conductor.
Use the Tip Sensor to trace wires in
hard to reach areas
When used with the AT-7000-TE Transmitter, the Tip Sensor
pinpoints the location of energized and de-energized wires
in tight, hard to reach spaces. It easily and accurately traces
the targeted energized and de-energized wires in junction
boxes, corners, walls, floors and ceilings to a depth of up to
6.1 meters (20 feet).
Use the Tip Sensor to trace wires in hard to reach areas.
Non-contact voltage (NCV) detection
The NCV feature extends functionality of the AT-7000-RE
Receiver by detecting energized wires from 90 to 600 V
and 40 to 400 Hz without the use of the AT-7000-TE
Transmitter. Its adjustable sensitivity fits a range of
applications, from detecting presence of voltage (higher
sensitivity) to precisely pinpointing a hot wire in a bundle
(lower sensitivity).
Non-contact voltage (NCV) detection.
Insulation Stick attachment
A standard insulation stick can be attached to the AT-7000RE Receiver to easily trace wires in high ceilings, walls, and
along floors. The stick can be purchased from electrical
distributors.*
Insulation Stick
Attachment
*This accessory is currently
not available through
Beha-Amprobe.
Trace wires in hard to reach places with insulation stick.
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2014 Beha-Amprobe® 13310-eng
www.Beha-Amprobe.com
AT-7000-EUR Advanced Wire Tracer
Specifications
TFT LCD Color Display size
TFT LCD Color Display Dimensions
TFT LCD Color Display Resolution
TFT LCD Color Display type
TFT LCD Color Display
Backlight
AT-7000-RE Receiver
AT-7000-TE Transmitter
SC-7000-EUR Signal Clamp
8.89 cm (3.5 in)
4.5 cm (1.77 in)
–
7.01 x 5.26 cm (2.76 x 2.07 in)
2.79 x 3.51 cm (1.1 x 1.38 in)
–
320px x 240px
128px x 160px
–
TFT LCD
RGB x TFT
–
•
•
–
•
•
–
mDDR
64 MB
64 MB
–
FLASH memory
Audio
Operating Temperature range
Storage Temperature
Operating Humidity
Operating altitude
Measurement Category
Transient protection
Pollution degree
Drop test
128 MB
128 MB
–
95 dB
–
–
-17.77 ˚C to 49˚C (0 to 120˚F)
-17.77˚C to 49˚C (0 to 120˚F)
-17.77˚C to 49˚C (0 to 120˚F)
-40 to 65.5˚C (-40 to 150˚F)
-40 to 65.5˚C (-40 to 150˚F)
-40 to 65.5˚C (-40 to 150˚F)
95% R.H max
95% R.H max
95% R.H max
2000 m
2000 m
2000 m
CAT IV 600 V
CAT IV 300 V
CAT IV 600 V
–
6.00 kV (1.2/50 uS surge)
–
2
2
2
1 m (3.28 ft)
1 m (3.28 ft)
1 m (3.28 ft)
4xAA Alkaline battery
90-270 V AC/DC, 40-400 Hz
AT-7030: BR-7000-T: LI-ION, 7.2 V, 2.2 Ah
AT-7020: 6x AA Alkaline Battery
–
4xAA battery: 2W
AT-7030: BR-7000-T battery: 2W
AT-7020: 6xAA battery:2W
AC line voltage (Charging state): 10W
AC line voltage: 3W
–
–
90-270 V
–
–
16 h
–
30 s
20 s
–
Power Supply
Power consumption
Charging voltage (BR-7000-T)
Charging duration (BR-7000-T)
Power up time
Non-Rechargeable Battery lifetime
Rechargeable Battery lifetime
(BR-7000-T)
Leakage current (non-rechargeable)
Leakage current (rechargeable)
IP Rating
Sampling rate
Signal Response
Response time
Voltage Measurement
Non-Contact Voltage (NCV)
LED Indicator
Operating Frequency
Acoustic Indication
Range Detection (Open air)
Smart mode
TIP Sensor: Energized
TIP Sensor: De-Energized
9h
9h
–
10 h
10 h
–
1.1 to 2.6 uA
6 to 14 uA
–
1.2 to 2.6 uA
1.2 to 4 uA
–
IP52
IP40
IP52
6.25 kHz Signal: 62.5 kSPS
32.768 kHz: 256 kSPS
NCV: 62.5 kSPS
6.25 kHz Signal: 62.5 kSPS
32.768 kHz: 256 kSPS
NCV: 62.5 kSPS
–
Audible beep, bargraph display,
numeric display
Numeric display
–
Smart mode: 750 ms
Tip Sensor Energized: 300 ms
Tip Sensor De-Energized: 750 ms
NCV: 500 ms, Battery monitoring: 5 s
Voltage measurement: 1.5 s
Battery monitoring: 5 s
Instantaneous
–
9-300 V, DC to 400 Hz
Accuracy: 9-109V AC/DC (+ - 10%)
110-300V AC/DC (+ - 5%)
Over-range indication: "OL" (>330V)
–
90-600 V AC (+ - 5%)
–
–
Green Flashing: Signal Detection
Red: Energized
OFF: De-Energized
Orange: Over voltage
–
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Voltage measurement: 40-400 Hz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
1 kHz Piezo Buzzer
–
–
–
–
–
Pinpointing: Around 5 cm (1.97 in) radius (+ - 2%)
Direction indication: Up to 1.52 m (5 ft) (+ - 2%)
–
–
Pinpointing: Around 5 cm (1.97 in) (+ - 1%)
Detection: Up to 6.71 m (22 ft) (+ - 1%)
–
–
Detection: Up to 4.27 m (14 ft) (+ - 5%)
–
–
Pinpointing: Around 5 cm (1.97 in) radius (+ - 5%)
Detection: Up to 1.22 m (4 ft) (+ - 5%)
–
–
Current Output (Low) Energized
–
53 mA rms
–
Current Output (High) Energized
–
92 mA rms
–
–
53 mA rms
–
–
120 mA rms
–
–
NCV
Current output (Low)
with BR-7000-T Energized
Current output (High)
with BR-7000-T Energized
Voltage output (Low) De-Energized
–
60 Vp-p
Voltage output (High) De-Energized
–
120 Vp-p
–
Voltage output (Clamp) De-Energized
–
180 Vp-p
1.5 Vp-p
Jaw Opening
–
–
5.08 cm (2 in)
Fuse
–
3.15A, 600V MAX, SLOW 5X20MM
–
27.75 x 11.25 x 6.483 cm
(10.92 x 4.43 x 2.55 in)
21.59 x 10.16 x 5.59 cm
(8.5 x 4 x 2.2 in)
20.83 x 8.13 x 4.27 cm
(8.2 x 3.2 x 1.68 in)
0.544 kg (1.20 lb)
0.593 kg (1.30 lb)
0.294 kg (0.648 lb)
Dimensions
Weight
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2014 Beha-Amprobe® 13310-eng
www.Beha-Amprobe.com
AT-7020-EUR
Advanced Wire
Tracer Kit
AT-7030-EUR
AT-7030-EUR
Advanced Wire
Tracer Kit
AT-7000-EUR Wire Tracer Kits
AT-7020-EUR Kit
AT-7030-EUR Kit
Description
AT-7000-RE
Receiver
⚫
⚫
Receiver unit with Smart Sensor, Tip Sensor and color TFT LCD
display
AT-7000-TE
Transmitter
⚫
⚫
Transmitter with two transmission frequencies
(6 kHz and 33 kHz) and three power modes (High, Low, Clamp)
TL-7000-EUR
Test Leads
⚫
⚫
Red test lead (1.9 m (6.4 ft), green test lead (7.7 m (25 ft), set
of black and red alligator clips, set of black and red test probes,
and special test lead
CC-7000-EUR
Carrying Case
⚫
⚫
Custom Beha-Amprobe hard carrying case that securely holds
transmitter, receiver, signal clamp, test leads and accessories
SC-7000-EUR
Signal Clamp
(optional)
⚫
Signal Clamp accessory for inducing a signal into wires without
access to bare conductors
HS-1
Hanger
(optional)
⚫
Three-way magnetic hanger for AT-7000-TE transmitter, allowing
for convenient hanging of unit, placement on belt or as a stand
BR-7000-T
Booster Battery
(optional)
⚫
Signal Booster Rechargeable Battery Pack (LI-ION, 7.2 V, 2.2 Ah),
provides increased signal transmission power in High and Clamp
modes
BR-7000C
Battery Charger
(optional)
(optional)
External battery charger for BR-7000-T
TL-7000-25M
Test Lead
(optional)
(optional)
25 m Test lead
4.06 kg (8.95 lb)
4.67 kg (10.30 lb)
40.6 x 33 x 17.8 cm
(16 x 13 x 7 in)
40.6 x 33 x 17.8 cm
(16 x 13 x 7 in)
Kit Specifications
Kit Weight
Case Size
www.Beha-Amprobe.com
Beha-Amprobe® | In den Engematten 14 | 79286 Glottertal, Germany | Tel: +49 (0) 7684 8009-0 | [email protected] | www.Beha-Amprobe.com
©2014 Beha-Amprobe® 13310-eng
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement