advertisement
▼
Scroll to page 2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What is PowerWalker VI 1000 SE?
PowerWalker VI 1000 SE is a line-interactive UPS designed to protect personal computers and sensitive electronic equipment.
What are the features of PowerWalker VI 1000 SE?
Features include microprocessor control, built-in DC start function, USB communication port, green power function, auto restart during AC recovery, modem/phone line surge protection, and overcharge and overload protection.
What is the capacity and output of PowerWalker VI 1000 SE?
It has a capacity of 1000VA/600W and provides a stepped sine wave output.
What is the input voltage range of PowerWalker VI 1000 SE?
The input voltage range is 162-290VAC with an input frequency range of 45-65Hz.
What is the output voltage regulation and frequency regulation of PowerWalker VI 1000 SE?
The output voltage regulation in battery mode is ±10% and the frequency regulation in battery mode is ±1Hz.
What is the transfer time of PowerWalker VI 1000 SE?
The typical transfer time is 4-6ms, with a maximum of 10ms.
What is the battery type and recharge time of PowerWalker VI 1000 SE?
It uses a 12V / 7Ah battery with a recharge time of 10 hours for 90% capacity after a complete discharge.
What is the noise level and fan control of PowerWalker VI 1000 SE?
The noise level is less than 45dB and the fan control is always on.
Download PDF
advertisement