advertisement
Split Series Keypad with Proximity Card Reader
SK-4131-SPSQ
Proximity Card Reader, 1,200 Users
Features:
Split series installation for added security – keypad and controller are separate thereby preventing access via keypad tampering
Built-in current limited (750mA) power source for keypad for added security
Simple three wire connection between keypad and controller
12~24 VDC Auto-adjusting operation
Possible user codes and/or proximity cards:
- Output #1: 1,000 (000~999)
- Output #2: 100 (001~100)
- Output #3: 100 (001~100)
Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
Up to 50 (01~50) duress codes for output #1, 10 (01~09) for output #2,
10 (01~09) for output #3
EEPROM Memory protects programmed information in case of power loss
Keypad illuminates when a button is pressed; backlight can be programmable for FULL or AUTO in standby mode
Keypad mounts to a standard single-gang back box
(surface-mount back box included)
All features are programmed directly from the keypad:
No need for an external programmer
Programmable egress input with optional warning alarm and delayed egress
Door sensor input for anti-tailgating operation
Interlocking input for connecting to a second keypad for mantrap applications
Dimensions:
4 5 /
8
"
(117mm)
Keypad
2 7 /
8
"
(73mm)
1 1 /
2
"
(38mm)
Controller
4 3 /
4
"
(120mm) 1 1 /
4
" (32mm)
SECO-LARM
® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: [email protected]
3 7 /
16
"
(87mm)
Operation
Proximity
Card Re ader
Specifications:
Operating voltage
Standby
Current draw
(at 12VDC)
Keypress
Output 1 active
Output 1 & 2 active
Output 1, 2, & 3 active
Total max current draw
#1—Form C
Outputs
#2—Form C
#3—Form C
Alarm
Key active
Duress
Interlock
Tamper
Egress
Door sensor
Inputs Door inhibit
Doorbell
Tamper
Proximity reader frequency
Proximity reader sensing distance
Operating humidity
Operating temperature
Weight
Keypad
Controller
Illuminated
5
Keys
12~24 VDC
88mA
115mA
115mA
128mA
138mA
220mA
5A@24VDC
1A@24VDC
1A@24VDC
100mA@24VDC
100mA@24VDC
100mA@24VDC
100mA@24VDC
50mA@24VDC
N.O. Ground
N.C. Ground
N.O. Ground
N.O. Ground
N.C. Ground
125kHz (EM 125)
1 1 /
2
" (38mm)
5~95% (non-condensing)
-4°~158° F (-20°~70° C)
6.3-oz (180g)
8.8-oz (250g)
Copyright © 2017 SECO-LARM U.S.A., Inc. All rights reserved. All trademarks are the property of
SECO-LARM U.S.A., Inc. or their respective owners. The SECO-LARM policy is one of continual development. For that reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints.
PI_SK-4131-SPSQ_170303.docx
Sample Application:
Keypad Status Buzzer and LEDs:
Red/Green Red/Green/Amber Red/Green
SECO-LARM
® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: [email protected]
LED Indicators – Keypad
Steady
Flashing
Green/Red (Left)
Available for free connection (Green)
Keypad locked (Red)
Output #1 inhibited (Red)
Inhibit mode paused (Red)
Keypad Sounds and LEDs
Status
In programming mode
Successful key entry
Successful code/card entry
Unsuccessful code/card entry
Power up delay
Amber LED (Center)
Programming mode
Standby mode
Sounds
-
1 Beep
2 Beeps
5 Beeps
Continuous beeping for
1 minute
1-Sec long beep
-
2 Beeps
1 Long beep
Continuous 3 fast beeps every 5 seconds
Continuous beep every 1.5 seconds
Output relay activation
In standby mode
System restore mode
Code / card already stored
Real time clock stopped after power loss
Keypad link-up with controller failed
Green/Red LED (Right)
Output #1 activated (Green)
Output #2 activated (Red)
Amber LED (Center)
Steady ON
1 Flash
2 Flashes
5 Flashes
Continuous flashing for
1 minute
-
1 Flash/sec
Fast flashing for 2.5 min
-
-
-
-
Copyright © 2017 SECO-LARM U.S.A., Inc. All rights reserved. All trademarks are the property of
SECO-LARM U.S.A., Inc. or their respective owners. The SECO-LARM policy is one of continual development. For that reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints.
PI_SK-4131-SPSQ_170303.docx
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project