Products Catalogue 2012 - Billets Elektro Werke Ltd.

Products Catalogue 2012 - Billets Elektro Werke Ltd.
Products Catalogue 2012
Cable Lugs, Crimping Tools & Bus Bar
(1929-2006)
In loving memory of
Shri. Govindbhai S. Patel
The Pioneer of Cable Jointing Technology in India
The Founder of Dowell's and
3D brand Cable Lugs and Crimping Tools.
Certifications
Electrical Research &
Development Association
IS - 8309
Test Certificate for Cu. light duty
& Cu. Heavy duty terminals
ISO 9001 : 2008 CERTICATE
Awards
Highest Exporter Performance
Award 1990 - 1991
All India Highest Export
Performance Award 1991 - 92
Highest Exporter
Performance Award 1992 - 1993
Regional Trophy
for Highest Exporter 2002 - 03
iNDEX
Product Category
Page No.
Copper Tubular Cable Lugs
l
Standard Type with Inspection hole for Copper Conductors
13 - 15
l
Extra Wide Palm Type with Inspection hole for Copper Conductors
16
Extra Long Type W/O Inspection hole for Copper Conductors
17
Light Duty W/O Inspection Hole for Aluminium Conductors
18 - 19
Light Duty Long Barrel W/O Inspection hole for Aluminium Conductors
20 - 21
Standard New Type W/O Inspection hole for Copper Conductors
22 - 24
l
l
l
l
Railway Series
Standard New Type W/O Inspection hole for Copper Conductors - REF : I.C.F.
25 - 26
Standard New Type With Inspection hole for Copper Conductors- REF : C.L.W.
27 - 28
Standard New Type With Inspection hole for Copper Conductors - REF : D.L.W.
29 - 30
Standard New Type With Inspection hole for Copper Conductors - REF : R.C.F.
31
Sheet Metal Lugs, Ring Type - REF : R.C.F.
32
l
l
l
l
l
Copper Connectors
l
Standard Type with Cable Stopper
33
l
Standard Type Long Barrel with Cable Stopper
34
Butt Connectors for Parallel Connection W/O Cable Stopper
35
Butt Connectors for Copper Conductors with & without Insulating Sleeve
35
l
l
Aluminium Tubular Cable Lugs
Compression Type for Crimping to XLPE Conductors
36
Compression Type for Crimping to XLPE Conductors - REF : IS 8309
37
l
l
iNDEX
Product Category
Page No.
Aluminium Tubular Cable Lugs
Compression Type Aluminium Terminal Ends for Crimping
l
to Aluminium Conductors
38 - 39
Compression Type Long Barrel Aluminium Terminal Ends for Crimping
l
to Aluminium Conductors
40 - 41
Aluminium Connectors
Aluminium Tubular In Line Connectors for Crimping to Aluminium Conductors
l
42
Aluminium Tubular In Line Long Barrel Connectors for Crimping to Aluminium
l
Conductors and Corrosion Inhibiting Compound (“3D-112”)
43
Wire Pin
Copper Reducer for Aluminium Conductors
44
Copper Reducer for Copper Conductors
45
Aluminium Reducer for Aluminium Conductors
46 - 47
l
l
l
End Sleeves
With Insulating Sleeve, DIN 46228, Part 4 48
Twin Type, With Insulating Sleeve
49
W/O Insulating Sleeve, DIN 46228, Part 1
50 - 51
l
l
l
Sheet Metal Lugs
Ring Type Brazed Seam
52 - 55
Ring Type with Insulating Sleeve
56 - 57
Ring Type Double Grip with Insulating Sleeve
58 - 59
Tailormade Ring Type Brazed Seam
60
l
l
l
l
iNDEX
Product Category
Page No.
Sheet Metal Lugs
Fork Type Brazed Seam
61
Fork Type with Insulating Sleeve
62
Fork Type Double Grip with Insulatng Sleeve
63
Tailormade Fork Type
63 - 64
Fork Type with hook Brazed Seam
65
Tailormade Fork Type
66
Chain Form Fork Type
66
Round Pin Type Brazed Seam
67
Rectangular Pin Type Brazed Seam
67
Round Pin Type With Insulating Sleeve
68
Round Pin Type Double Grip With Insulating Sleeve
68
Tailormade Round Pin Type
69
Tailormade Rectangular Pin Type With Insulating Sleeve
69
Flat Pin Type Brazed Seam
70
Flat Pin Type With Insulating Sleeve
70
Flat Pin Type Double grip with insulating sleeve
71
Tailormade Flat Pin Type
71
l
Tailormade Flat Pin Type With Insulating Sleeve
71
Copper SEMIS
72
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
iNDEX
Product Category
Page No.
Crimping Tools
Hand Crimping Tool “3D - 17”
73
Hand Crimping Tool “3D - 2”
73
Hand Crimping Tool “3D - 41”
74
Hand Crimping Tool “3D - 48”
74
Hand Crimping Tool “3D - 52”
75
Hand Crimping Tool “3D - 53”
75
Hand Crimping Tool “3D - 95”
76
Hand Crimping Tool “3D - 7”
77
Cable Cutter “3D - 31”
77
Heavy Duty Hydraulic Crimping Tool “3D - 150”
78
Heavy Duty Hydraulic Crimping Tool “3D - 100”
79
Hydraulic Cable Cutter “3D - 30”
80
Hand Operated Hydraulic Crimping Tool “3D - 88”
80
l
l
l
l
l
l
l
l
l
l
l
l
l
Quality Policy
Note : “All dimensions indicated in the catalogue are nominal dimensions, product produced may vary in
size within the stipulated tolerances.”
our motto
The dimensions of our
brand are
1. R&D 2. Consistency of Quality
3. Assured Deliveries.
and to understand the exact needs of the users to recommend/guide them in the proper direction with
latest available technique in cable termination.
Precision in every dimension
Quality Benefits of 3D Terminals
Don’t compromise on quality for the sake of price. A cheap quality terminal can affect the optimum
functioning of your product. At billets Elektro Werke Ltd. we have an experience of more than 40 years in
designing and manufacturing cable terminals and crimping tools. We have stringent in-house quality and
inspection standards. And we don’t compromise…
Conductivity: All our input raw materials are checked for conductivity. We only use ETP grade, 99.9%
conductivity copper and 60% conductivity aluminium . Incoming material is checked for conductivity
and dimensional accuracy.
Finish: All terminals go through deburring and polishing operations to eliminate sharp edges.
Accuracy: Our tool room has two wire cutting EDM’s (Charmilles, Germany), a machining center (Haas,
USA), and two spark erosion machines, besides a wide array of lathes, milling machines, drilling machines,
grinding machines etc. Our press tools are designed keeping in mind high accuracy, productivity and
quality which makes the final product within excellent dimensional tolerance.
Brazing: we use high quality brazing wire containing 2% silver. This ensures a high flowing rate after
melting and an even layer. This leaves a brazing seam with no lumps which may spoil the finish of the
terminal or affect the crimpability. We also normalize the terminals after brazing and conduct a bend test
at the seam to ensure that there is no cracking.
Crimpability: We ensure that our material is at the optimum softness so that operator can crimp the
terminal with minimal effort without even hair crack and at the same time ensures that it is hard enough
to sustain deformation.
Plating: Our terminals have a tin coating of minimum 5 microns to ensure a shelf life of at least two years.
Thickness is checked by Coulometric testing and salt spray tests.
Insulation: Our insulation does not show any stress marks or colour changes even with extreme crimping.
We also conduct heat aging and dielectric tests to ensure that the insulation does not degrade in high
temperature environments.
Brazing
Crimpability
PlatingInsulation
Frequently Asked Questions
1.Which material is used for insulation of sheet metal terminals?
We use sleeves made out of PVC for insulating sheet metal terminals. The operating temperature for these lugs is from 60 degrees C to 100 degrees C. For high temperature applications we can also provide
Nylon or Polycarbonate insulating sleeves. For applications where there is a chance of the sleeve coming
off due to vibrations (eg railway locomotive) we use a copper sleeve under the PVC insulation “Double grip
terminals” for enhancing the rigidity.
2.Why is the colour of insulation different for various cable sizes?
As per international practice in use, Red colour is for terminals of 1.5 Sq.mm, Blue colour is for terminals of
2.5 Sq.mm & Yellow colour is for terminals of 4-6 Sq.mm,
3.What are the Indian standard specifications for our products?
Indian standard specifications are formulated for Aluminium terminals only. At present specifications for
copper or sheet metal terminals are not formulated.
IS 8308 - 1993 covers Aluminium In Line Connectors & IS 8309 - 1993 covers Aluminium Tubular Terminal
Ends. We however have obtained license for aluminium “Tubular terminals” only.
We have also developed lugs and connectors as per DIN specifications, however we don’t have certification
for the same.
4.How do we know the purity of copper or Aluminium used in our products?
We manufacture our copper lugs and connectors from cathodes obtained from LME approved warehouses
only. Our aluminium lugs and connectors are manufactured from ISI certified tube manufacturers, who
use aluminium ingots of the highest purity.
We have in-house testing facilities to check the conductivity for copper and aluminium.
5. Does 99% copper content guarantee 99% IACS conductivity?
No. Conductivity is affected by the type of impurities content in balance 1%. It has been observed that
0.5% arsenic may bring down the conductivity to the tune of 50% to 60%
6.How to select the right lug for the right cable size?
d
=π d /4 = π(2.5) /4 = 4.9 mm
7.Flexible wire does not go into the barrel of the same size of terminal?
Outer diameter of flexible wire is maximum compared to the other (stranded or solid} shape. Our terminals
are designed to easily receive stranded wires. It becomes difficult to insert the flexible wire into the barrel.
Best practice is to form the wire with forming dies or use one higher size of terminal (however that may
cause flashing). Use of terminals having easy entry barrels will also provide ease of insertion.
Frequently Asked Questions
8.Why serrations are provided?
Serrations help in cutting oxide film formed over the conductor. (In case of aluminium the oxide film is
formed at normal temperature or humidity). Serrations also help in providing better grip of the joint.
However, we have taken the pull off test over the same size of crimped terminal, with and without
serrations. Though the terminals without serrations withstand lesser pull off load, it is will within the limits
of 4Kg./Sq.mm. The use of a corrosion-inhibiting compound (3D-112) is a better option for breaking the
oxide layer on the conductor.
9.How can corrosion after crimping be reduced or prevented?
It can be prevented or reduced by applying special corrosion inhibiting compounds between the surfaces
of different material being used in electrical circuit.
Crimping Techniques
1.How Corrosion Inhibiting Compound (3D-112) should be used?
Compound should be freely applied over the stripped portion of wire and also on the inside surface of
barrel. Excess compound will seal the barrel mouth after crimping and in turn prevent the ingress of
moisture or other contaminated substances present in the surrounding atmosphere.
Compound is recommended to be used when aluminium or copper lug is used with aluminium
conductor.
2.How can we know that the crimped joint is proper or not?
A properly crimped joint is one in which the compressed section of the joint is so tightly packed that it
almost becomes homogenous.
It can be ascertained by:
Pull Off Load Test - Crimped joint should withstand the pull off load of 4Kg./Sq.mm. Say for 240 Sq.mm.
cable, it should withstand 240 X 4 = 960 Kg.
Joint Resistance - As per IS 8337 the resistance of crimped joint on aluminium wire should not be more
than the resistance across the length of the conductor equal to the length of barrel of the terminal.
Visual Inspection - Cut a section of the crimped portion and examine the section
for air gaps between the conductors, or between the ID wall of the lug and the
conductors. Presence of air gaps indicates that the crimping is not homogenous. As
shown in the picture:
3. Can insulated terminals be crimped with the tools meant for non-insulated
terminals?
NO. The tools designed for Non-insulated terminals will not properly crimp the terminals, it will also
damage the insulating sleeve. Similarly tool designed for insulated terminal will not properly crimp the
non insulated terminal since the crimp profile are different.
4. What should be the direction of crimping, when crimping multiple crimps on longer barrel lugs?
The direction of crimping should always be away from the palm portion of the barrel in the case of lugs,
and should start from the centre in the case of connectors.
Direction of Compression
Direction of Compression
Crimping Techniques
5. What should be the stripping length of conductor?
It should be slightly more than the barrel length, which will give the rough idea whether the conductor
has been fully inserted or not. However, wherever possible, it is recommended to use the terminals having
inspection vent, which will show if the conductor is fully inserted or not.
6. Terminals having bigger stud hole (say 16-mm) can be used with smaller bolt (say 12-mm)?
NO. When the smaller bolt is used with the terminal having higher stud hole, the
bolt washer starts forming dish shape while tightening and does not exert proper
pressure on the palm. This results in improper contact, which can lead to failure of
the termination due to excess heat generation. This is illustrated by the picture here.
The electrical contractor in this case had terminated the lug on a fuse gear with a
considerably smaller area, resulting in melting of the lug.
7. What is the importance of spring washer in any bolted connections?
When the current flows through any conductive metal, heat is generated. The conducting metal expands
when the heat is generated and contracts when the current stops flowing. Spring washer helps in
maintaining proper pressure on bolted joints during expansion and contraction.
8. Can terminals be crimped without the recommended crimping tools?
Our lugs and tools are designed to offer the best possible electrical and mechanical
joint. We have found that some electricians and electrical contractors prefer using
hammers or pliers to crimp a lug. This technique brought about just to save some
expense, is absolutely NOT recommended by us. Mainly because hammering
a terminal will not provide homogenious joint and the adequate pull-off load
strength.
9. Why crimping should be on top of the lug and not the bottom?
Crimping from the bottom of the lug causes it to deform at the palm portion,
which will prevent it from complete contact with busbar upon termination.
Crimping from Bottom
Crimping from Top
Copper Tubular Cable Lugs
Standard Type, With Inspection Hole
for Copper Conductors
Material: ETP-copper
Surface: Tin Plated
c2
a
b
3D-1.5 -4
Ød 1
c1
J
6
10
16
25
Packing Qty
3.7
4.2
8
5
4
5
16
3D-17
M 5
3D-2623
1.8
3.7
5.2
8
5
4
5
16
3D-2
M 6
3D-2624
1.8
3.7
6.5
10
5
5
6
18
3D-117
3D-108
M 4
3D-2625
2.4
4
4.2
8
7
4
5
18
3D-17
M 5
3D-2627
2.4
4
5.2
8
7
4
5
18
3D-2
M 6
3D-2628
2.4
4
6.5
10
7
5
6
20
M 8
3D-2629
2.4
4
8.2
11
7
7
8
24
M 5
3D-2630
3.1
4.8
5.2
10
7
5
6
20
3D-17
M 5
3D-2632
3.1
4.8
5.2
9
7
5
6
20
3D-2
M 6
3D-2631
3.1
4.8
6.5
10
7
5
6
20
3D-117
M 8
3D-2633
3.1
4.8
8.2
12
7
6.5
8.5
24
3D-108
M 5
3D-2634
3.8
5.5
5.2
10
9
5
6
23
3D-17
M 6
3D-2635
3.8
5.5
6.2
10
9
5
6
23
3D-2
M 8
3D-2637
3.8
5.5
8.4
12
9
6
9
27
M 5
3D-2642
4.5
6.2
5.2
12
9
6
7
25
3D-2
M 6
3D-2643
4.5
6.2
6.5
12
9
6
7
25
3D-88
M 8
3D-2645
4.5
6.2
8.4
12
9
6
9
27
3D-117
3D-108
3D-2
200
200
d1
d3
d2
b
Total Lenght
J
1.8
Palm
Width
C2
3D-2622
Stud Size
C1
M 4
3D Cat
No.
Barrel OD
Stud Distance
from Barrel
4
Stud Distance
from top
2.5
Barrel
Length
1.5
a
Bolt 0
Barrel ID
Conductors
mm2
Crimping Profile
Dimension In mm
Tools
M 5
3D-2652
5.4
7.1
5.2
12
12
7
7
30
M 6
3D-2653
5.4
7.1
6.5
12
12
7
7
30
M 8
3D-2655
5.4
7.1
8.4
12
12
7
9
32
M 6
3D-2663
6.8
8.8
6.5
13
12
7
7
30
3D-88
M 8
3D-2665
6.8
8.8
8.4
13
12
7
9
32
3D-117
M 8
3D-2666
6.8
8.8
8.4
16
12
10
11
37
3D-108
M 10
3D-2668
6.8
8.8
10.5
16
12
10
11
37
3D-100
M 12
3D-2670
6.8
8.8
13
18
12
12
13
41
200
200
200
200
200
15
Copper Tubular Cable Lugs
Standard Type, With Inspection Hole
for Copper Conductors
Material: ETP-copper
Surface: Tin Plated
c2
a
b
3D-1.5 -4
Ød 1
c1
Stud Distance
from Barrel
d2
b
a
C1
C2
J
3D-2673
8.2
10.6
6.5
15
12
9
9
35
3D-117
M6
3D-2674
8.2
10.6
6.5
15
15
9
9
38
3D-88
M8
3D-2676
8.2
10.6
8.4
15
12
9
9
35
3D-108
M8
3D-2677
8.2
10.6
8.4
15
15
9
9
38
3D-100
M 10
3D-2679
8.2
10.6
10.2
15
15
9
11
40
M 10
3D-2680
8.2
10.6
10.5
18
12
10
11
38
50
70
95
120
16
M 10
3D-2681
8.2
10.6
10.5
18
15
10
11
41
M 12
3D-2683
8.2
10.6
13
20
15
12
13
45
Tools
M6
3D-2687
10
12.8
6.5
18
16
10
11
43
3D-117
3D-2689
10
12.8
8.4
18
16
10
11
43
3D-88
3D-100
M 10
3D-2691
10
12.8
10.5
18
16
10
11
43
3D-2693
10
12.8
13
20
16
12
13
47
M 12
3D-2695
10
12.8
12.5
18
16
12
13
47
M6
3D-2697
11.2
14.7
6.5
21
18
12
13
50
3D-117
M8
3D-2698
11.2
14.7
8.4
21
18
12
13
50
3D-88
M 10
3D-2699
11.2
14.7
10.5
21
18
12
13
50
3D-108
M 12
3D-2700
11.2
14.7
13
21
18
12
13
50
3D-100
M 14
3D-2704
11.2
14.7
15
28
18
16
16
57
M 16
3D-2705
11.2
14.7
17
28
18
16
16
57
M8
3D-2708
13.5
17.4
8.4
25
20
13
13
55
3D-117
M 10
3D-2709
13.5
17.4
10.5
25
20
13
13
55
3D-100
M 12
3D-2712
13.5
17.4
13
25
20
13
13
55
M 14
3D-2713
13.5
17.4
15
28
20
16
16
61
200
400
M8
M 12
Packing Qty
Stud Distance
from top
d3
M6
Total Lenght
Barrel
Length
d1
35
Palm
Width
3D Cat
No.
Stud Size
Bolt 0
Barrel OD
Conductors
mm2
Barrel ID
Dimension In mm
Crimping Profile
J
M 16
3D-2715
13.5
17.4
17
28
20
16
16
61
M8
3D-2716
15.0
19.4
8.4
28
22
14
14
60
3D-117
M 10
3D-2717
15.0
19.4
10.5
28
22
14
14
60
3D-88
M 12
3D-2719
15.0
19.4
13
28
22
14
14
60
3D-108
M 14
3D-2721
15.0
19.4
15
28
22
16
16
64
3D-100
M 16
3D-2722
15.0
19.4
17
28
22
16
16
64
300
150
100
80
copper Tubular Cable Lugs
Standard Type, With Inspection Hole
for Copper Conductors
Material: ETP-copper
Surface: Tin Plated
c2
a
b
3D-1.5 -4
Ød 1
c1
d1
d3
d2
b
a
C1
C2
J
150
M8
3D-2726
16.5
21.2
8.4
30
26
16
16
69
3D-117
M 10
3D-2727
16.5
21.2
10.5
30
26
16
16
69
3D-88
185
240
300
400
500
630
Barrel
Length
3D Cat
No.
Palm
Width
Bolt 0
Tools
M 12
3D-2729
16.5
21.2
13
30
26
16
16
69
3D-108
M 14
3D-2732
16.5
21.2
15
30
26
16
16
69
3D-100
M 16
3D-2733
16.5
21.2
17
30
26
16
16
69
M 20
3D-2734
16.5
21.2
21
34
26
19
23
79
M 10
3D-2736
18.5
23.5
10.5
34
32
17
17
78
3D-117
M 12
3D-2737
18.5
23.5
13
34
32
17
17
78
3D-108
3D-100
M 14
3D-2738
18.5
23.5
15
34
32
17
17
78
M 16
3D-2741
18.5
23.5
17
34
32
17
17
78
M 20
3D-2743
18.5
23.5
21
34
32
17
17
78
M 10
3D-2747
21
26.5
10.5
38
38
20
20
92
3D-117
M 12
3D-2748
21
26.5
13
38
38
20
20
92
3D-100
M 14
3D-2749
21
26.5
15
38
38
20
20
92
M 16
3D-2750
21
26.5
17
38
38
20
20
92
M 20
3D-2751
21
26.5
21
38
38
20
20
92
M 12
3D-2754
23.5
30
13
43
42
22
22
101
M 14
3D-2755
23.5
30
15
43
42
22
22
101
M 16
3D-2756
23.5
30
17
43
42
22
22
101
M 20
3D-2757
23.5
30
21
43
42
22
22
101
26.8
34.8
13
50.1
44
26
26
114
3D-117
26.8
34.8
15
50.1
44
26
26
114
3D-100
3D-2762
26.8
34.8
17
50.1
44
26
26
114
26.8
34.8
17
50.1
44
22
27
105
M 20
3D-2764
26.8
34.8
21
50.1
44
22
27
105
M 20
3D-2765
26.8
34.8
21
50.1
44
26
26
114
M 16
3D-2769
30
39
17
56
48
28
28
124
M 20
3D-2770
30
39
21
56
48
28
28
124
M 16
3D-2773
35
45
17
65
56
33
33
144
M 20 3D-2774
35
45
21
65
56
33
33
144
25
15
3D-2760
3D-2761
3D-2763
50
25
M 12
M 16
50
3D-117
M 14
M 16
Packing Qty
Total Lenght
Stud Distance
from Barrel
Stud Distance
from top
Stud Size
Conductors
mm2
Barrel ID
Barrel OD
Dimension In mm
Crimping Profile
J
25
3D-120
10
3D-120
8
17
Copper Tubular Cable Lugs
18
Total Lenght
b
a
C1
C2
J
Packing Qty
Stud Distance
from Barrel
d2
Stud Distance
from top
d3
Barrel Lenght
d1
Palm
Width
3D Cat No.
Stud Size
Bolt 0
Barrel
OD
Conductors
mm2
Barrel ID
Dimension In mm
Crimping Profile
Extra Wide Palm Type
With Inspection Hole
Material - ETP-Copper
Surface - Tin Plated
6
10
3D-2638
3.8
6.2
10.2
16
9
9
11
32
10
10
3D-2648
4.7
7.1
10.5
16
10
9
10
32
200
200
16
10
3D-2658
5.5
7.9
10.5
16
12
10
10
36
200
16
12
3D-2659
5.5
8.5
13
18
12
12
12
40
200
Copper Tubular Cable Lugs
Stud Distance
from top
d2
b
a
C1
C2
J
3D-2340
7
9
8.2
13
16
8
12
41
3D-7
M 10 3D-2340A
7
9
10.2
13
16
8
12
41
3D-88
50
70
95
120
150
185
240
300
400
M8
Tools
3D-2341
8
10.6
8.2
15
20
9
14
48
3D-7
M 10 3D-2341A
8
10.6
10.2
15
20
9
14
48
3D-124
3D-2342
9.2
12.2
8.2
17
26
10
16
59
3D-7
M 10 3D-2342A
M8
9.2
12.2
10.2
17
26
10
16
59
3D-88
M 12
3D-2342B
9.2
12.2
12.7
17
26
10
16
59
M 10
3D-2343
11.5
15
10.2
20
28
12
19
66
M 12 3D-2343A
11.5
15
12.7
20
28
12
19
66
M 12
200
80
12.8
17
12.7
24
32
12
20
74
3D-7
12.8
17
16.2
24
32
12
20
74
3D-124
3D-2345
14.8
19.6
12.7
28
35
14
23
82
3D-7
M 16 3D-2345A
14.8
19.6
16.2
28
35
14
23
82
3D-88
3D-2346
16
21.2
12.7
30
38
14
24
86
3D-7
M 16 3D-2346A
16
21.2
16.2
30
38
14
24
86
3D-108
M 12
300
100
3D-2344
M 12
200
3D-7
M 16 3D-2344A
M 12
Packing Qty
Barrel
Length
d3
M8
Total Lenght
Barrel OD
d1
25
35
Stud Distance
from Barrel
3D Cat
No.
Palm
Width
Bolt 0
Stud Size
Conductors
mm2
Barrel ID
Dimension In mm
Crimping Profile
Extra Long Type,
W/O Inspection Hole
Material: ETP-copper
Surface: Tin Plated
3D-2347
18
24
12.7
34
43
17
23
95
3D-7
M 16 3D-2347A
18
24
16.2
34
43
17
23
95
3D-108
50
50
25
M 20
3D-2347B
18
24
21
34
43
17
23
95
3D-124
M 16
3D-2348
22
28
16.2
40
50
20
30
112
3D-7
20
M 20 3D-2348A
22
28
21
40
50
20
30
112
15
M 16
3D-2998
24.5
32
17
48
50
19
22
119
3D-7
M 20
3D-2999
24.5
32
21
48
50
19
22
122
3D-124
M 16
3D-3000
27.5
38.5
17
55
70
25
25
140
3D-124
M 20 3D-3000A
27.5
38.5
21
55
70
25
25
140
10
19
Copper Tubular Cable Lugs
Stud Distance
from Barrel
d2
b
a
C1
C2
J
3D-2501
2.3
3.8
5.2
9
7
5
5
20
Tools
3D-17
Packing Qty
Stud Distance
from top
d3
M5
Total Lenght
Barrel
Length
d1
2.5
Palm
Width
3D Cat
No.
Stud Size
Bolt 0
Barrel OD
Conductors
mm2
Barrel ID
Dimension In mm
Crimping Profile
Light Duty W/O Inspection Hole
for Aluminium Conductors
Material: ETP-Copper
Surface: Tin Plated
200
3D-2
4
M6
3D-2502
3.1
4.8
6.4
11
7
6
6
22
3D-17
200
3D-2
6
M6
3D-2503
3.8
5.5
6.4
11
9
6
6
24
3D-17
200
3D-2
10
M6
3D-2504
4.5
6.2
6.4
11
9
6
6
24
3D-2
200
16
M6
3D-2505
5.4
7.1
6.4
11
12
6
8
30
3D-2
200
25
M6
3D-2506
7
9
6.4
13
12
8
12
37
3D-116
200
35
M6
3D-2507
8
10
6.4
15
12
8
12
37
3D-116
200
M8
3D-2508
8
10
8.2
15
12
8
12
37
3D-88
M6
3D-2509
9.2
11.2
6.4
16
16
9
12
45
M8
3D-2510
9.2
11.2
8.2
16
16
9
12
45
3D-125
50
70
95
120
150
20
3D-7
300
200
M 10
3D-2511
9.2
11.2
10.2
16
16
9
12
45
M8
3D-2512
11.5
13.8
8.2
20
18
13
15
56
3D-116
M 10
3D-2513
11.5
13.8
10.2
20
18
13
15
56
3D-88
M 12
3D-2514
11.5
13.8
12.7
20
18
13
15
56
3D-125
M 10
3D-2515
12.8
15.6
10.2
23
20
13
15
58
3D-7
100
M 12
3D-2516
12.8
15.6
12.7
23
20
13
15
58
80
M 10
3D-2517
14.8
17.8
10.2
26
22
14
16
62
3D-116
M 12
3D-2518
14.8
17.8
12.7
26
22
14
16
62
3D-88
M 16
3D-2519
14.8
17.8
16.2
26
22
14
16
62
3D-125
M 10
3D-2520
16
19.6
10.2
28
26
15
18
70
3D-7
M 12
3D-2521
16
19.6
12.7
28
26
15
18
70
M 16
3D-2522
16
19.6
16.2
28
26
15
18
70
50
Copper Tubular Cable Lugs
Packing Qty
Total Lenght
Stud Distance
from Barrel
Stud Distance
from top
Stud Size
3D Cat
No.
d1
d3
d2
b
a
C1
C2
J
185
M 12
3D-2523
18
22
12.7
32
28
21
21
83
3D-116
M 16
3D-2524
18
22
16.2
32
28
21
21
83
3D-125
M 16
3D-2525
22
26
16.2
38
34
24
24
97
3D-116
10
M 20
3D-2526
22
26
20.3
38
34
24
24
97
M 16
3D-2527
24
28.7
16.2
42
37
25
25
103
3D-116
5
M 20
3D-2528
24
28.7
20.3
42
37
25
25
103
3D-125
M 20
3D-2529
28
33.2
20.3
49
44
27
27
116
3D-116
240
300
400
Barrel
Length
Bolt 0
Palm
Width
Conductors
mm2
Barrel ID
Barrel OD
Dimension In mm
Crimping Profile
Light Duty W/O Inspection Hole
for Aluminium Conductors
Material: ETP-Copper
Surface: Tin Plated
Tools
20
5
3D-125
500
M 20
3D-2530
30
36
20.3
53
48
27
27
122
3D-121
5
630
M 20
3D-2531
35
41.5
20.3
61
53
31
33
137
3D-121
5
800
BLK
3D-2532
39
46.3
67
68
75
165
3D-121
10
1000
BLK
3D-2533
43
53.8
76
90
90
210
3D-121
10
21
Copper Tubular Cable Lugs
b
a
C1
C2
J
5.2
9
10.5
5
5
23.5
Tools
3D-17
Packing Qty
d2
3.8
Total Lenght
Stud Distance
from Barrel
d3
2.3
Palm
Width
d1
3D-2501 LB
Stud Size
Stud Distance
from top
M5
Barrel
Length
2.5
3D Cat No.
Barrel OD
Conductors
Bolt 0
mm2
Barrel ID
Dimension In mm
Crimping Profile
Light Duty Long Barrel
W/O Inspection Hole
for Aluminium Conductors
Material: ETP-Copper
Surface: Tin Plated
200
3D-2
4
M6
3D-2502 LB
3.1
4.8
6.4
11
10.5
6
6
25.5
3D-17
200
3D-2
6
M6
3D-2503 LB
3.8
5.5
6.4
11
13.5
6
6
28.5
10
M6
3D-2504 LB
4.5
6.2
6.4
11
13.5
6
6
28.5
3D-2
16
M6
3D-2505 LB
5.4
7.1
6.4
11
18
6
8
36
3D-2
200
25
M6
3D-2506 LB
7
9
6.4
13
18
8
12
43
3D-116
200
35
M6
3D-2507 LB
8
10
6.4
15
18
8
12
43
3D-116
200
M8
3D-2508 LB
8
10
8.2
15
18
8
12
43
3D-88
M6
3D-2509 LB
9.2
11.2
6.4
16
24
9
12
53
M8
3D-2510 LB
9.2
11.2
8.2
16
24
9
12
53
M 10
3D-2511 LB
9.2
11.2
10.2
16
24
9
12
53
M8
3D-2512 LB
11.5
13.8
8.2
20
27
13
15
M 10
3D-2513 LB
11.5
13.8
10.2
20
27
13
15
M 12
3D-2514 LB
11.5
13.8
12.7
20
27
13
15
65
3D-125
M 10
3D-2515 LB
12.8
15.6
10.2
23
30
13
15
68
3D-7
100
M 12
3D-2516 LB
12.8
15.6
12.7
23
30
13
15
68
M 10
3D-2517 LB
14.8
17.8
10.2
26
33
14
16
73
3D-116
80
M 12
3D-2518 LB
14.8
17.8
12.7
26
33
14
16
73
3D-88
M 16
3D-2519 LB
14.8
17.8
16.2
26
33
14
16
73
3D-125
3D-7
3D-17
200
3D-2
200
3D-125
50
70
95
120
150
22
3D-7
300
65
3D-116
200
65
3D-88
M 10
3D-2520 LB
16
19.6
10.2
28
39
15
18
83
M 12
3D-2521 LB
16
19.6
12.7
28
39
15
18
83
M 16
3D-2522 LB
16
19.6
16.2
28
39
15
18
83
50
Copper Tubular Cable Lugs
300
400
Packing Qty
Total Lenght
Stud Distance
from Barrel
Stud Distance
from top
d3
d2
b
a
C1
C2
J
3D-2523 LB
18
22
12.7
32
45
21
21
100
3D-116
M 16
3D-2524 LB
18
22
16.2
32
45
21
21
100
3D-125
M 16
3D-2525 LB
22
26
16.2
38
54
24
24
117
3D-116
10
M 20
3D-2526 LB
22
26
20.3
38
54
24
24
117
M 16
3D-2527 LB
24
28.7
16.2
42
58
25
25
124
3D-116
5
M 20
3D-2528 LB
24
28.7
20.3
42
58
25
25
124
3D-125
M 20
3D-2529 LB
28
33.2
20.3
49
66
27
27
138
3D-116
Barrel
Length
d1
M 12
Palm
Width
Barrel ID
240
Stud Size
3D Cat No.
Conductors
Bolt 0
mm2
185
Barrel OD
Dimension In mm
Crimping Profile
Light Duty Long Barrel
W/O Inspection Hole
for Aluminium Conductors
Material: ETP-Copper
Surface: Tin Plated
Tools
20
5
3D-125
500
M 20
3D-2530 LB
30
36
20.3
53
72
27
27
144
3D-121
5
630
M 20
3D-2531 LB
35
41.5
20.3
61
83
31
33
167
3D-121
5
800
BLK
3D-2532 LB
39
46.3
67
98
75
195
3D-121
10
1000
BLK
3D-2533 LB
43
53.8
76
135
90
255
3D-121
10
23
Copper Tubular Cable Lugs
d3
d2
b
a
C1
C2
J
M5
3D-2149
3.5
6.5
5.5
10
9
6.5
7.5
27.5
3D-2
M6
3D-2150
3.5
6.5
6.5
12
9
6.5
7.5
27.5
3D-17
16
25
35
Tools
M8
3D-2110
3.5
6.5
8.5
15
9
10
10
33
3D-117
M 10
3D-2158
3.5
6.5
10.5
17
9
12
12
37
3D-108
M 12
3D-2159
3.5
6.5
13
19
9
13
13
41
M5
3D-2041
4.5
7
5.5
12
10
6.5
7.5
28.5
3D-2
M6
3D-2183
4.5
7
6.5
12
10
6.5
7.5
28.5
3D-117
M8
3D-2184
4.5
7
8.5
15
10
10
10
35
3D-88
M 10
3D-2160
4.5
7
10.5
17
10
12
12
39
3D-108
M 12
3D-2161
4.5
7
13
19
10
13
13
42
M5
3D-2185
5.5
8.5
5.5
12
13
5.5
6.5
31.5
3D-2
M6
3D-2186
5.5
8.5
6.5
12
13
6.25
7.5
33.25
3D-117
M8
3D-2187
5.5
8.5
8.5
15
13
8.5
9.5
37.5
3D-88
M 10
3D-2162
5.5
8.5
10.5
17
13
10.5
11.5
41.5
3D-108
M 12
3D-2163
5.5
8.5
13
19
13
12
13
45
M5
3D-2165
7
10
5.5
14
15
7.5
7.5
37.5
3D-117
M6
3D-2189
7
10
6.5
14
15
7.5
7.5
37.5
3D-88
3D-108
M8
3D-2190
7
10
8.5
16
15
10
10
42
M 10
3D-2191
7
10
10.5
18
15
12
12
46
M 12
3D-2166
7
10
13
19
15
13
13
48
M 14
3D-2167
7
10
15
21
15
14.5
14.5
52.5
M6
3D-2192
8.5
12
6.5
17
17
7.5
7.5
39.5
3D-117
M8
3D-2193
8.5
12
8.5
17
17
10
10
44
3D-88
3D-100
M 10
3D-2014
8.5
12
10.5
19
17
12
12
49
M 12
3D-2168
8.5
12
13
21
17
13
13
51
M 14
3D-2169
8.5
12
15
21
17
14.5
14.5
54.5
M 16
3D-2006
8.5
12
17
26
17
16
16
58
Packing Qty
Total Lenght
Stud Distance
from Barrel
Stud Distance
from top
d1
6
Barrel
Length
3D Cat
No.
Palm
Width
Bolt 0
Barrel ID
Stud Size
Conductors
mm2
10
24
Barrel OD
Dimension In mm
Crimping Profile
Standard New Type,
W/O Inspection Hole
for Copper Conductors
Material: Electrolytic Copper
Surface: Tin Plated
200
200
200
200
200
300
200
Copper Tubular Cable Lugs
d1
d3
d2
b
a
C1
C2
J
50
M6
3D-2001
10
14
6.5
20
19
10
10
47
3D-117
M8
3D-2003
10
14
8.5
20
19
10
10
47
3D-88
3D-100
70
95
120
Barrel
Length
3D Cat
No.
Palm
Width
Bolt 0
M 10
3D-2004
10
14
10.5
20
19
12
12
51
M 12
3D-2170
10
14
13
23
19
13
13
56
59.5
M 14
3D-2171
10
14
15
23
19
14.5
14.5
M 16
3D-2007
10
14
17
28
19
16
16
62
M 20
3D-2008
10
14
21
30
19
19
19
67
Tools
M6
3D-2005
12
16.5
6.5
23
21
10
10
53
3D-117
M8
3D-2121
12
16.5
8.5
23
21
10
10
53
3D-88
M 10
3D-2164
12
16.5
10.5
23
21
12
12
56
3D-100
M 12
3D-2188
12
16.5
13
23
21
13
13
59
M 14
3D-2172
12
16.5
15
23
21
14.5
14.5
62.5
M 16
3D-2173
12
16.5
17
28
21
16
16
66
M 20
3D-2129
12
16.5
21
30
21
19
19
72
M8
3D-2015
13.5
18
8.5
26
25
12
12
60
3D-117
3D-2018
13.5
18
10.5
26
25
12
12
60
3D-88
M 12
3D-2019
13.5
18
13
26
25
13
13
62
3D-100
M 14
3D-2174
13.5
18
15
26
25
14.5
14.5
65.5
M 16
3D-2175
13.5
18
17
28
25
16
16
70.0
M 20
3D-2130
13.5
18
21
36
25
22
22
82.0
M8
3D-2020
15
19.5
8.5
28
26
14
14
65
3D-117
M 10
3D-2021
15
19.5
10.5
28
26
14
14
65
3D-88
3D-100
M 12
3D-2022
15
19.5
13
28
26
14
14
65
3D-2023
15
19.5
15
28
26
15
15
67
M 16
3D-2035
15
19.5
17
30
26
16
16
70
M 20
3D-2176
15
19.5
21
36
26
22
22
85
200
150
100
M 10
M 14
Packing Qty
Total Lenght
Stud Distance
from Barrel
Stud Distance
from top
Stud Size
Conductors
mm2
Barrel ID
Barrel OD
Dimension In mm
Crimping Profile
Standard New Type,
W/O Inspection Hole
for Copper Conductors
Material: Electrolytic Copper
Surface: Tin Plated
100
75
50
25
Copper Tubular Cable Lugs
d3
d2
b
a
C1
C2
J
M8
3D-2036
16.5
21
8.5
31
30
14
14
70
3D-117
M 10
3D-2037
16.5
21
10.5
31
30
14
14
70
3D-100
240
300
400
M 12
3D-2038
16.5
21
13
31
30
15
15
72
M 14
3D-2039
16.5
21
15
31
30
15
15
72
Tools
M 16
3D-2040
16.5
21
17
31
30
16
16
74
M 20
3D-2177
16.5
21
21
36
30
22
22
88
M 10
3D-2042
19
24
10.5
35
30
18
18
83
3D-117
3D-100
M 12
3D-2043
19
24
13
35
30
18
18
83
M 14
3D-2044
19
24
15
35
30
18
18
83
M 16
3D-2045
19
24
17
35
30
18
18
83
M 20
3D-2046
19
24
21
39
30
22
22
91
M 10
3D-2047
21
26
10.5
38
35
20
20
93.5
3D-117
M 12
3D-2048
21
26
13
38
35
20
20
93.5
3D-100
M 14
3D-2049
21
26
15
38
35
20
20
93.5
M 16
3D-2050
21
26
17
38
35
20
20
93.5
M 20
3D-2051
21
26
21
38
35
20
20
93.5
M 12
3D-2052
23.5
29.5
13
43
44
24
24
111
3D-117
M 14
3D-2053
23.5
29.5
15
43
44
24
24
111
3D-100
M 16
3D-2122
23.5
29.5
17
43
44
24
24
111
M 20
3D-2131
23.5
29.5
21
43
44
24
24
111
M 12
3D-2123
27
34
13
49
44
24
24
114
3D-117
3D-100
M 14
3D-2124
27
34
15
49
44
24
24
114
M 16
3D-2125
27
34
17
49
44
24
24
114
M 20
3D-2109
27
34
21
49
44
24
24
114
Packing Qty
Total Lenght
Stud Distance
from Barrel
Stud Distance
from top
d1
150
Barrel
Length
3D Cat
No.
Palm
Width
Bolt 0
Barrel ID
Stud Size
Conductors
mm2
185
26
Barrel OD
Dimension In mm
Crimping Profile
Standard New Type,
W/O Inspection Hole
for Copper Conductors
Material: Electrolytic Copper
Surface: Tin Plated
50
25
20
15
10
Railway series Lugs
Standard New Type,
W/O Inspection Hole
for Copper Conductors
Material: ETP Copper
Surface: Tin Plated
c2
a
Ød3
b
Ød2
3D70-10
S
Ød1
c1
J
Copper Tubular Terminal Ends for solderless crimping to Copper Conductors
REF : I.C.F.
Dimension In mm
Conductors
mm2
3D Cat No.
17‐5
17‐6
d1
a
b
d2
d3
C1
C2
K
J
s
3D‐5042
6.0
14.0
11.9
5.2
8.5
6.0
10.0
3
33
2.5
3D‐5043
6.0
14.0
11.9
6.5
8.5
6.0
10.0
3
33
2.5
17‐8
3D‐5044
6.0
14.0
16.0
8.2
8.5
9.0
11.0
3
37
1.7
17‐10
3D‐5045
6.0
14.0
16.0
10.2
8.5
9.0
11.0
3
37
1.7
23‐5
3D‐5046
7.1
18.0
14.3
5.2
10.2
7.0
10.0
4
39
3.1
23‐6
3D‐5047
7.1
18.0
14.3
6.5
10.2
7.0
10.0
4
39
3.1
23‐8
3D‐5048
7.1
18.0
14.3
8.2
10.2
7.0
10.0
4
39
3.1
23‐10
3D ‐5049
7.1
18.0
19.0
10.2
10.2
10.0
12.0
4
44
2.2
29‐5
3D‐5050
8.0
18.0
16.3
5.2
11.7
8.0
11.0
4
41
3.7
29‐6
3D‐5051
8.0
18.0
16.3
6.5
11.7
8.0
11.0
4
41
3.7
29‐8
3D‐5052
8.0
18.0
16.3
8.2
11.7
8.0
11.0
4
41
3.7
29‐10
3D‐5053
8.0
18.0
20.0
10.2
11.7
11.0
14.0
4
47
2.8
29‐13
3D‐5054
8.0
18.0
20.0
13.0
11.7
11.0
14.0
4
47
2.8
45‐5
3D‐5055
9.8
18.0
19.3
5.2
13.7
10.0
10.0
5
43
3.9
45‐6
3D‐5056
9.8
18.0
19.3
6.5
13.7
10.0
10.0
5
43
3.9
45‐8
3D‐5057
9.8
18.0
19.3
8.2
13.7
10.0
10.0
5
43
3.9
45‐10
3D‐5058
9.8
18.0
19.3
10.2
13.7
10.0
10.0
5
43
3.9
45‐13
3D‐5059
9.8
18.0
22.0
13.0
13.7
11.0
14.0
5
48
3.2
57‐6
3D‐5060
11.1
24.0
22.2
6.5
15.8
11.0
15.0
6
56
4.7
57‐8
3D‐5061
11.1
24.0
22.2
8.2
15.8
11.0
15.0
6
56
4.7
57‐10
3D‐5062
11.1
24.0
22.2
10.2
15.8
11.0
15.0
6
56
4.7
57‐13
3D‐5062E13
11.1
24.0
22.2
13.0
15.8
11.0
15.0
6
56
4.7
75‐6
3D‐5063
12.6
24.0
25.0
6.5
17.8
13.0
15.0
6
58
5.2
75‐8
3D‐5064
12.6
24.0
25.0
8.2
17.8
13.0
15.0
6
58
5.2
75‐10
3D‐5065
12.6
24.0
25.0
10.2
17.8
13.0
15.0
6
58
5.2
75‐13
3D‐5066
12.6
24.0
25.0
13.0
17.8
13.0
15.0
6
58
5.2
27
Railway series lugs
Standard New Type,
W/O Inspection Hole
for Copper Conductors
Material: ETP Copper
Surface: Tin Plated
c2
a
Ød3
b
Ød2
3D70-10
S
Ød1
c1
J
Copper Tubular Terminal Ends for solderless crimping to Copper Conductors
REF : I.C.F.
Dimension In mm
Conductors
mm2
28
3D Cat No.
d1
a
b
d2
d3
C1
C2
K
J
s
90‐6
3D‐5067
13.7
24.0
26.9
6.5
19.1
13.0
16.0
6
59
5.4
90‐8
3D‐5068
13.7
24.0
26.9
8.2
19.1
13.0
16.0
6
59
5.4
90‐10
3D‐5069
13.7
24.0
26.9
10.2
19.1
13.0
16.0
6
59
5.4
90‐13
3D‐5070
13.7
24.0
26.9
13.0
19.1
13.0
16.0
6
59
5.4
110‐6
3D‐5071
15.3
24.0
29.6
6.5
20.9
15.0
17.0
6
62
5.6
110‐8
3D‐5072
15.3
24.0
29.6
8.2
20.9
15.0
17.0
6
62
5.6
110‐10
3D‐5073
15.3
24.0
29.6
10.2
20.9
15.0
17.0
6
62
5.6
110‐13
3D‐5074
15.3
24.0
29.6
13.0
20.9
15.0
17.0
6
62
5.6
146‐8
3D‐5075
17.5
29.0
34.0
8.2
24.0
17.0
18.0
7
71
6.5
146‐10
3D‐5076
17.5
29.0
34.0
10.2
24.0
17.0
18.0
7
71
6.5
146‐12
3D‐5077
17.5
29.0
34.0
13.0
24.0
17.0
18.0
7
71
6.5
146‐16
3D‐5078
17.5
29.0
34.0
17.0
24.0
17.0
18.0
7
71
6.5
183‐10
3D‐5079
19.8
29.0
38.2
10.2
26.9
18.0
21.0
8
76
7.1
183‐12
3D‐5080
19.8
29.0
38.2
13.0
26.9
18.0
21.0
8
76
7.1
183‐16
3D‐5081
19.8
29.0
38.2
17.0
26.9
18.0
21.0
8
76
7.1
225‐10
3D‐5082
21.9
29.0
42.2
10.2
29.7
21.0
24.0
9
83
7.8
225‐12
3D‐5083
21.9
29.0
42.2
13.0
29.7
21.0
24.0
9
83
7.8
225‐16
3D‐5084
21.9
29.0
42.2
17.0
29.7
21.0
24.0
9
83
7.8
225‐20
3D‐5085
21.9
29.0
42.2
21.0
29.7
21.0
24.0
9
83
7.8
299‐12
3D‐5086
25.4
29.0
48.5
13.0
34.0
24.0
26.0
10
89
8.6
299‐16
3D‐5087
25.4
29.0
48.5
17.0
34.0
24.0
26.0
10
89
8.6
299‐20
3D‐5088
25.4
29.0
48.5
21.0
34.0
24.0
26.0
10
89
8.6
366‐12
3D‐5089
28.0
38.0
53.6
13.0
37.6
27.0
29.0
11
105
9.6
366‐16
3D‐5090
28.0
38.0
53.6
17.0
37.6
27.0
29.0
11
105
9.6
366‐20
3D‐5091
28.0
38.0
53.6
21.0
37.6
27.0
29.0
11
105
9.6
437‐12
3D‐5092
30.5
38.0
59.1
13.0
41.7
29.0
32.0
12
111
11.2
437‐16
3D‐5093
30.5
38.0
59.1
17.0
41.7
29.0
32.0
12
111
11.2
437‐20
3D‐5094
30.5
38.0
59.1
21.0
41.7
29.0
32.0
12
111
11.2
Railway series lugs
Standard New Type,
With Inspection Hole
for Copper conductors
Material: ETP Copper
Surface: Tin Plated
Type I
Type III
Type VII
Copper Tubular Terminal Ends for solderless crimping to Copper Conductors
REF : C.L.W.
Dimension In mm
Conductors
mm2
3D Cat No.
d1
a
b
d2
d3
C1
C2
K
Type
j
s
3‐3
3D‐5016
2.6
5.5
7.0
3.2
4.6
3.5
6.5
I
15.5
1.6
3‐3
3D‐5017
2.6
5.5
5.0
3.2
4.6
2.5
6.5
I
14.5
2.0
3‐4
3D‐5018
2.6
5.5
7.3
4.2
4.6
4.0
6.5
I
16.0
1.5
3‐4
3D‐5019
2.6
5.5
8.0
4.2
4.6
4.0
6.5
I
16.0
1.4
3‐5
3D‐5020
2.6
5.5
8.0
5.2
4.6
4.0
6.5
I
16.0
1.4
3‐6
3D‐5021
2.6
8.0
10.0
6.2
5.0
5.0
10.0
3
III
34.0
1.4
10‐6
3D‐5022
5.0
10.0
10.0
6.2
7.0
7.0
11.0
4
VII
40.0
2.0
10‐8
3D‐5023
5.0
10.0
12.0
8.2
7.0
7.0
11.0
4
VII
40.0
1.6
10‐10
3D‐5024
5.0
10.0
14.0
10.2
7.0
7.0
11.0
4
VII
40.0
1.4
25‐6
3D‐5025
8.0
16.0
15.0
6.2
10.0
10.0
14.0
5
IV
45.0
2.0
25‐8
3D‐5026
8.0
16.0
15.0
8.2
10.0
10.0
14.0
5
IV
45.0
2.0
35‐8
3D‐5027
9.6
20.0
17.0
8.2
12.0
14.0
21.0
5
IV
60.0
2.4
Type IV
Type V
Type VIII
I2
Type VI
29
Railway series lugs
Standard New Type,
With Inspection Hole
for Copper conductors
Material: ETP Copper
Surface: Tin Plated
Type I
Type III
Type VII
Copper Tubular Terminal Ends for solderless crimping to Copper Conductors
REF : C.L.W.
Dimension In mm
Conductors
mm2
d1
a
b
d2
d3
C1
C2
K
Type
j
s
50‐10
3D‐5028
10.8
20.0
20.0
10.5
14.0
14.0
20.0
6
IV
60.0
3.2
50‐14
3D‐5029
10.8
20.0
20.0
15.0
14.0
14.0
20.0
6
IV
60.0
3.2
70-10
3D‐5030
12.8
25.0
24.0
11.0
17.0
12.0
18.0
10
IV
65.0
4.2
120‐13
3D‐5031
17.0
30.0
32.0
14.0
22.2
18.0
27.0
13
IV
88.0
5.2
120‐20
3D‐5032
17.0
30.0
32.0
21.0
22.2
18.0
27.0
13
IV
88.0
5.2
6.0
150‐15
3D‐5033
18.0
35.0
34.0
16.0
24.0
18.0
25.0
12
IV
90.0
225‐15
3D‐5034
22.0
45.0
40.0
16.0
28.0
18.0
25.0
12
IV
100.0
6.0
225‐10X2
3D‐5035
22.0
45.0
40.0
11.0
28.0
15.0
22.0
12
V
130.0
6.0
I2
36
225‐10
3D‐5036
22.0
45.0
40.0
11.0
28.0
18.0
25.0
12
IV
100.0
6.0
270‐10X2
3D‐5037
26.0
55.0
40.0
11.0
32.0
15.0
24.0
12
VIII
142.0
6.0
36
36
270
3D‐5038
26.0
VI
70.0
475‐10X2
3D‐5039
36.5
75.0
50.0
11.0
46.1
15.0
24.0
15
VIII
165.0
9.6
475‐21
3D‐5040
36.5
75.0
50.0
22.0
46.1
22.0
33.0
15
IV
145.0
9.6
475‐10
3D‐5041
36.5
75.0
50.0
11.0
46.1
22.0
33.0
15
IV
145.0
9.6
Type IV
30
3D Cat No.
30.0
Type V
Type VIII
Type VI
Railway series lugs
Standard New Type,
With Inspection Hole
for Copper Conductors
Material: ETP Copper
Surface: Tin Plated
Type I
Type II
Type III
Copper Tubular Terminal Ends for solderless crimping to Copper Conductors
REF : D.L.W.
Dimension In mm
Conductors
mm2
3D Cat
No.
133‐10
3D‐5000
d1
a
b
d2
d3
C1
C2
K
Type
J
s
17.0
27
32
10.3
22.2
19
28
8
I
82
5.2
133‐13
3D‐5001
17.0
27
32
13.5
22.2
19
28
8
I
82
5.2
133‐13
3D‐5002
17.0
27
32
13.5
22.2
14
19
7
I
67
5.2
133‐10
3D‐5003
17.0
27
32
10.3
22.2
14
19
7
I
67
5.2
133‐10
3D‐5004
17.0
27
32
10.3
22.2
14
19
12
II
62
5.2
I2
133‐10
3D‐5005
17.0
27
32
10.3
22.2
14
19
12
III
67
5.2
133‐8X2
3D‐5006
17.0
27
32
8.7
22.2
11
11
8
IV
79
5.2
22.2
133‐8X2
3D‐5007
17.0
27
32
8.7
22.2
13
14
11
VI
109
5.2
44.4
Type IV
Type V
Type VI
31
Railway series lugs
Standard New Type,
With Inspection Hole
for Copper Conductors
Material: ETP Copper
Surface: Tin Plated
Type I
Type II
Type III
Copper Tubular Terminal Ends for solderless crimping to Copper Conductors
REF : D.L.W.
Dimension In mm
Conductors
mm2
d1
a
b
d2
d3
C1
C2
K
Type
J
s
270‐16
3D‐5008
24.6
40
46
16.6
31.7
21
22
11
I
94
7.1
270‐13
3D‐5009
24.6
40
46
13.5
31.7
21
22
11
I
94
7.1
I2
270‐13
3D‐5010
24.6
35
46
13.5
31.7
21
22
15
III
86
7.1
270‐10X2
3D‐5011
24.6
40
46
10.3
31.7
12
13
8
V
97
7.1
25.4
31.7
270‐13X2
3D‐5012
24.6
40
46
13.5
31.7
12
13
8
IV
105
7.1
400‐17
3D‐5013
29.3
47
53
17.4
37.2
22
29
10
I
108
7.9
400‐13
3D‐5014
29.3
47
53
13.5
37.2
22
29
10
I
108
7.9
400‐14X2
3D‐5015
29.3
51
53
14.3
37.2
13
27
7
IV
130
7.9
Type IV
32
3D Cat
No.
Type V
Type VI
31.7
Railway series lugs
Standard New Type,
With Inspection Hole
for Copper Conductors
Material : ETP-Copper
Surface : Tin Plated
REF : R.C.F.
Total Length
Inspection Hole
b
s
a
C1
C2
I
J
ØK
5.8
8.5
6.5
11.9
2.7
14
6
10
27
33
3
M8
3D-5044RCF
5.8
8.5
8.2
16.0
1.9
14
9
11
28
37
3
M 10
3D-5045RCF
5.8
8.5
10.2
16.0
1.9
14
9
11
28
37
3
25
Creepage
dist ance
Stud Dist -ance
From Top
d2
3D-5043RCF
Stud Dist -ance
From Barrel
Barrel Length
d3
M6
Palm Thickness
Barrel ID
d1
16
Palm Width
3D
CAT NO.
Stud Size
Bolt Ø
Barrel OD
Conductor mm²
Dimensions in mm
M8
3D-5048RCF
7.2
11.5
8.2
16.0
4.3
18
8
11
33
41
3
M 10
3D-5049RCF
7.2
11.5
10.2
19.6
3.4
18
11
14
36
47
3
35
M 10
3D-5053RCF
8.2
13.0
10.2
17.9
4.8
18
10
10
33
43
3
50
M8
3D-5057RCF
10.0
15.5
8.2
21.6
5.5
24
11
15
45
56
3
70
95
120
150
185
M 10
3D-5058RCF
10.0
15.5
10.2
21.6
5.5
24
11
15
45
56
3
M 12
3D-5059RCF
10.0
15.5
13.0
21.6
5.5
24
11
15
45
56
3
M 10
3D-5065RCF
12.0
17.8
10.2
25.0
5.8
24
13
15
45
58
3
M 12
3D-5066RCF
12.0
17.8
13.0
25.0
5.8
24
13
15
45
58
3
M 16
3D-5066E16RCF
11.2
14.7
17
28
2.2
18
16
16
41
57
3
M8
3D-5068RCF
13.5
20.0
8.2
27.8
6.5
24
15
17
47
62
4
M 10
3D-5069RCF
13.5
20.0
10.2
27.8
6.5
24
15
17
47
62
4
M 12
3D-5070RCF
13.5
20.0
13.0
27.8
6.5
24
15
17
47
62
4
M 16
3D-5070E16RCF
13.5
17.4
17
28
3.2
20
16
16
45
61
4
M 12
3D-5074RCF
15.4
23.0
13.0
32.0
7.6
29
17
18
54
71
4
M 16
3D-5074E16RCF
15.0
19.4
17
28
4.4
22
16
16
48
64
4
M 12
3D-5077RCF
17.4
26.0
13.0
36.4
8.6
29
18
21
58
76
4
M 16
3D-5078RCF
17.4
26.0
17.0
36.4
8.6
29
18
21
58
76
4
M 16
3D-5078-1RCF
16.5
21.2
17.0
30
4.7
26
16
16
53
69
4
M 16
3D-5081RCF
18.5
23.5
17
34
5.0
32
17
17
61
78
4
33
Railway series lugs
Type I
Sheet Metal Lugs, Ring Type
Type-I Brazed Seam
Type-II With Insulating Sleeve
Material: ETP-Copper
Surface: Tin Plated
Type I
Type II
F
d2
H
B
J1
B
d1
K
L3
H
C1
J
L1
d3
Type II
F
D
d2
D
d1
d3
A1
C2
REF : R.C.F.
Bolt
Ø
3D
CAT NO
1.5
M5
3D-3086RCF
5.2
1.8 3.8
10.0
1.0
5
2
8
15
20
2.5
M6
3D-3132RCF
6.4
2.7 5.3
12.0
1.3
6
2
8
16
22
4
M3
3D-3198RCF
3.2
2.9 5.5
7.2
1.3
6
-
8.4
-
M6
3D-3202RCF
6.4
2.8 5.0
12.0
1.1
6
-
8
-
d2 ford1solderless
d3
D crimpling
F
B toK Copper
H
L1
J
A1
Copper Tubular Terminal Ends
Conductors
6
10
34
C2
TYPE
Conductor mm²
Dimensions in mm
REFL3: D.L.W.
C1
J1
4.4
5.4
10
6
20
II
7.6
7.3
15
9.2
25
II
18
6.4
7.1
15
8.6
23.4
II
20
6.4 7.1
15
8.6 23.0
II
22.5 6.4 7.1
15
8.6 27.5
II
25.8
-
-
-
-
-
M8
3D-3203RCF
8.2
3.3 5.3
14.0
1.0
6
2
10.5
-
M5
3D-1431RCF
5.2
3.6 6.2
9.6
1.3
8
-
13
21
M6
3D-1415RCF
6.4
3.6 6.2
12.0
1.3
8
-
15.8 23.8 29.8
-
-
-
-
-
I
M8
3D-1421RCF
8.2
3.6 6.2
16.0
1.3
8
-
20.5 28.5 36.5
-
-
-
-
-
I
M 10
3D-1427RCF 10.2 3.8 6.2
16.0
1.2
8
-
20.5 28.5 36.5
I
M 12
3D-1430RCF 13.0 3.8 6.2
19.0
1.2
8
-
M6
3D-1465RCF
6.4
4.8 7.4
16.0
1.3
8
M8
3D-1466RCF
8.2
4.8 7.4
16.0
1.3
M 10
3D-1461RCF 10.5 5.2 8.4
22
1.6
I
-
-
-
-
-
38.5
-
-
-
-
-
I
-
22.3 30.3 38.3
-
-
-
-
-
I
8
-
22.3 30.3 38.3
-
-
-
-
-
I
8
-
-
-
-
-
-
I
21
32
29
30.3
49
copper Connectors
Standard Type with Cable Stopper
Material: ETP-copper
Surface: Tin Plated
Dimension In mm
Conductors
mm2
3D Cat No.
Tools
d1
d3
J
Crimping
Profile
Packing
Qty
1.5
3D-2802
1.8
3.7
12
3D-17, 3D-2
200
2.5
3D-2804
2.4
4.0
15
3D-17, 3D-2
200
4
3D-2806
3.1
4.8
15
3D-17, 3D-2
200
6
3D-2808
3.8
5.5
15
3D-17, 3D-2
200
10
3D-2810
4.5
6.2
20
3D-2, 3D-117, 3D-88
200
16
3D-2812
5.4
7.1
20
3D-2, 3D-117, 3D-88
200
20
3D-2816
6.0
7.7
20
3D-117, 3D-100, 3D-88
200
25
3D-2817
6.8
8.8
32
3D-117, 3D-100, 3D-88
200
35
3D-2820
8.2
10.6
36
3D-117, 3D-100, 3D-88
150
50
3D-2823
10
12.8
40
3D-117, 3D-100, 3D-88
200
70
3D-2826
11.2
14.7
40
3D-117, 3D-100, 3D-88
150
100
95
3D-2828
13.5
17.4
45
3D-117, 3D-100, 3D-88
120
3D-2830
15.0
19.4
45
3D-117, 3D-100, 3D-88
80
150
3D-2833
16.5
21.2
55
3D-117, 3D-100, 3D-88
50
185
3D-2836
18.5
23.5
65
3D-117, 3D-100
50
240
3D-2838
21.0
26.5
80
3D-117, 3D-100
25
300
3D-2841
23.5
30.0
85
3D-117, 3D-100
25
400
3D-2843
26.8
34.8
91
3D-117, 3D-100
15
500
3D-2844
30.0
39.0
100
3D-120
10
630
3D-2846
35.0
45.0
112
3D-120
5
800
3D-2847
39.0
50.6
150
3D-120
20
1000
3D-2848
43.0
56.2
170
3D-120
10
35
copper Connectors
Standard Type Long Barrel
with Cable Stopper
Material: ETP-copper
Surface: Tin Plated
Dimension In mm
36
Conductors
mm2
3D Cat No.
Tools
d1
d3
J
Crimping
Profile
Packing
Qty
1.5
3D-2802LB
1.6
3.2
23.0
3D-17, 3D-2
200
2.5
3D-2804LB
2.0
3.7
23.0
3D-17, 3D-2
200
4
3D-2806LB
3.1
4.8
23.0
3D-17, 3D-2
200
6
3D-2808LB
3.8
5.5
23.0
3D-17, 3D-2
200
10
3D-2810LB
4.4
6.2
30.0
3D-2, 3D-117, 3D-88
200
16
3D-2812LB
5.3
7.1
30.0
3D-2, 3D-117, 3D-88
200
25
3D-2817LB
7.0
9.0
38.0
3D-117, 3D-100, 3D-88
200
35
3D-2820LB
8.0
10.0
45.0
3D-117, 3D-100, 3D-88
150
50
3D-2823LB
9.2
11.2
53.0
3D-117, 3D-100, 3D-88
200
70
3D-2826LB
11.6
13.8
60.0
3D-117, 3D-100, 3D-88
150
95
3D-2828LB
12.8
15.6
68.0
3D-117, 3D-100, 3D-88
100
120
3D-2830LB
14.8
17.8
75.0
3D-117, 3D-100, 3D-88
80
150
3D-2833LB
16.0
19.6
83.0
3D-117, 3D-100, 3D-88
50
185
3D-2836LB
18.0
22.0
90.0
3D-117, 3D-100
50
240
3D-2838LB
22.0
26.0
98.0
3D-117, 3D-100
25
300
3D-2841LB
24.0
28.7
113.0
3D-117, 3D-100
25
400
3D-2843LB
28.0
33.2
135.0
3D-117, 3D-100
15
500
3D-2844LB
30.0
36.0
143.0
3D-120
10
630
3D-2846LB
35.0
41.5
158.0
3D-120
5
800
3D-2847LB
39.0
46.3
180.0
3D-120
20
1000
3D-2848LB
43.0
53.8
225.0
3D-120
10
copper Connectors
Butt Connectors
For Parallel Connection
W/O Cable Stopper
Material: ETP-copper
Surface: Tin Plated
Dimension In mm
3D Cat No.
d1
d3
J
1.5
3D-2790
1.6
3.2
7
3D-17, 3D-2
200
2.5
3D-2791
2.4
4.0
7
3D-17, 3D-2
200
6
3D-2792
3.5
5.5
7
3D-17, 3D-2
200
10
3D-2793
4.5
6.2
10.5
3D-2, 3D-117, 3D-88
200
16
3D-2794
5.4
7.1
11.5
3D-2, 3D-117, 3D-88
200
25
3D-2795
6.8
8.8
13
3D-117, 3D-100, 3D-88
200
35
3D-2796
8.2
10.6
14
3D-117, 3D-100, 3D-88
100
50
3D-2797
10
12.8
16
3D-117, 3D-100, 3D-88
100
Tools
Crimping
Profile
Packing
Qty
Conductors
mm2
70
3D-2798
11.2
14.7
18
3D-117, 3D-100, 3D-88
100
95
3D-2799
13.5
17.4
19
3D-117, 3D-100, 3D-88
100
copper Connectors
Butt Connectors
For Copper Conductors
with & without Insulating Sleeve
Insulation : Hard PVC
Material: ETP-copper
Surface: Tin Plated
Type I
Type II
Dimension In mm
Conductors
mm2
3D Cat No.
1.5
2.5
Tools
Crimping
Profile
Packing
Qty
Type
d1
d3
J
3D-1845
1.6
3.2
15
3D-17 3D-2
200
II
3D-1846
2.4
4.0
15
3D-17 3D-2
200
II
4
3D-1847
3.5
5.5
15
3D-17 3D-2
200
II
1.5
3D-3762
1.6
3.2
25
3D-41
200
I
2.5
3D-3763
2.4
4.0
25
3D-41
200
I
4
3D-3764
3.5
5.5
27
3D-41
200
I
37
Aluminium Tubular Cable Lugs
Compression Type,
for Crimping to XLPE Conductors,
Material : Aluminium
Surface : Natural
Stud Distance
from top
Packing Qty
Barrel Length
Crimping Profile
Palm
Width
d1
d3
d2
b
a
C1
C2
J
8.3
6.2
12
38
9
12
66
3D-7
3D-88
3D-100
200
200
Total Lenght
Stud Size
Stud Distance
from Barrel
Barrel OD
3D Cat No.
Tools
16
M6
3D-4000
5
25
M8
3D-4001
7.2
9.6
8.2
14
38
9
12
66
//
35
M8
3D-4002
8.3
11.1
8.2
16
47
11
11
76
//
100
50
M 10
3D-4003
10.1
13.5
10.2
19.5
46
11
13
78
//
100
150
70
M 10
3D-4004
11.2
14.5
10.2
20.5
59
13
13
93
//
95
M 12
3D-4005
12
16.9
12.7
23.5
70
14
14
107
//
50
120
M 12
3D-4006
13.7
19
12.7
26.5
70
15
15
111
//
25
M 12
3D-4007
15.1
21.1
12.7
29.5
80
17
17
125
//
20
M 16
3D-4008
15.1
21.1
17
29.5
80
17
17
125
15
150
185
240
300
38
Bolt 0
Barrel ID
Conductors mm2
Dimension In mm
M 12
3D-4009
16.6
23.9
12.7
33
80
18
18
128
3D-7
M 16
3D-4010
16.6
23.9
17
33
80
18
18
128
3D100
//
M 12
3D-4012
19.3
27.2
12.7
37.5
83
22
22
141
M 16
3D-4013
19.3
27.2
17
37.5
83
22
22
141
M 12
3D-4015
21.8
30.2
12.7
42
86
27
27
154
M 16
3D-4016
21.8
30.2
17
42
86
27
27
154
10
10
M 20
3D-4014
21.8
30.2
20.1
42
86
27
27
154
//
400
M 20
3D-4017
25
34.8
20.3
48
110
30
30
184
3D-120
25
500
M 20
3D-4018
28.2
39.1
20.3
54
122
32
32
202
//
20
630
BLK
3D-4019
31.7
44.4
61
137
34
34
222
//
10
800
BLK
3D-4020
35.7
49.5
68
144
39
39
247
//
10
1000
BLK
3D-4021
41
56
77.5
157
45
45
277
//
5
Aluminium Tubular Cable Lugs
Compression Type,
Aluminium Terminal ends,
for Crimping to XLPE Conductors,
Material : Aluminium
Surface : Natural
Ref: IS 8309
( For XLPE Conductors )
16
Stud Distance
from top
b
a
C1
Packing Qty
Barrel Length
d2
Tools
Crimping Profile
Palm
Width
d3
Total Lenght
Stud Size
d1
Stud Distance
from Barrel
Barrel OD
3D Cat No.
Barrel ID
Bolt 0
Conductors mm2
Dimension In mm
C2
J
8
10
57
3D-7
3D-88
3D-100
200
8
3D-4000 XLPE
5.75 10.25
8.4
16.25
32
25
8
3D-4001 XLPE
6.95 12.25
8.4
16.25
32
8
10
57
//
200
35
10
3D-4002 XLPE
8.15 14.25 10.5
20.25
42
10
12
72
//
100
50
10
3D-4003 XLPE
9.45 16.25 10.5
21.75
42
10
12
72
//
100
70
12
3D-4004 XLPE
11.4 18.75
13
25.25
52
13
15
90
//
150
95
12
3D-4005 XLPE
12.9 22.25
13
30.25
56
13
15
95
//
50
120
12
3D-4006 XLPE
14.9 23.25
13
31.75
56
15
20
102
//
25
150
12
3D-4007 XLPE
16.5 25.25
13
34.75
60
15
20
108
//
20
185
16
3D-4010 XLPE
18.5 28.75
17
39.75
60
15
20
110
3D-7
3D-100
15
240
16
3D-4013 XLPE
21.2 32.25
17
44.75
70
19
24
130
//
10
300
16
3D-4016 XLPE
23.5 34.25
17
47.75
70
19
24
130
//
10
400
16
3D-4017 XLPE
26.2 38.75
17
53.75
75
19
24
138
3D-120
25
500
16
3D-4018 XLPE
29.2 44.25
17
60.75
80
22
24
148
//
20
630
16
3D-4019 XLPE
34.2 50.25
17
69.75
90
26
28
170
//
10
39
Aluminium Tubular Cable Lugs
Compression Type,
Aluminium Terminal ends,
for Crimping to Aluminium Conductors,
Material : Aluminium
Surface : Natural
3.2
6.7
7
4
4
14
18
3D-17
200
4
M4
3D-2536
2.9
5.5
4.2
7.2
7
4
4
14
18
3D-17
200
d3
d2
b
Tools
M5
3D-2537
2.9
5.5
5.2
12.0
7
5
5
16
21
3D-2
6
M6
3D-2538
3.5
5.5
6.4
12.0
7
6
6
17
23
3D-17
200
10
M6
3D-2539
4.4
7.2
6.4
9.7
9
8
9
22
30
3D-7
200
M8
3D-2540
4.4
7.2
8.2
15.0
9
8
9
22
30
3D-2
M6
3D-2541
5.4
8.3
6.4
11.4
13
9
11
28
37
3D-7
M8
3D-2542
5.4
8.3
8.2
11.7
13
9
11
28
37
3D-88
M 10
3D-2543
5.4
8.3
10.2
18.0
13
9
11
29
38
M6
3D-2544
7.0
9.7
6.4
13.7
16
10
11
34
44
3D-7
M8
3D-2545
7.0
9.7
8.2
13.7
16
10
11
34
44
3D-124
M 10
3D-2546
7.0
9.7
10.2
14.0
16
10
11
34
44
3D-95H
M 12
3D-2547
7.0
9.7
12.7
20.0
16
12
12
35
47
16
25
35
50
70
95
M6
3D-2548
8.0
10.8
6.4
15.4
18
11
11
35
46
3D-7
M8
3D-2549
8.0
10.8
8.2
15.4
18
11
11
35
46
3D-124
M 10
3D-2550
8.0
10.8
10.2
15.7
18
11
11
35
46
3D-88
M8
3D-2551
9.3
13.0
8.2
18.3
22
11
13
43
54
3D-7
M 10
3D-2552
9.3
13.0
10.2
18.3
22
11
13
43
54
3D-124
M 12
3D-2553
9.3
13.0
12.7
18.5
22
12
13
42
54
M8
3D-2554
11.3
15.5
8.2
21.8
26
13
13
47
60
3D-7
M 10
3D-2555
11.3
15.5
10.2
21.8
26
13
13
47
60
3D-124
M 12
3D-2556
11.3
15.5
12.7
21.8
26
13
13
47
60
M 10
3D-2557
13.2
17.4
10.2
24.8
28
14
14
50
64
3D-7
M 12
3D-2558
13.2
17.4
12.7
24.8
28
14
14
50
64
3D-124
M 16
3D-2559
13.2
17.4
16.2
24.8
28
15
15
51
66
Note : ISI Licence is given for catalogue numbers 3D-2541 Through 3D-2577 (16 mm2 to 1000 mm2)
16-10 3D -2543, 25-12 3D- 2547, 50-12 3D-2553 & 95-16 3D-2559 W/O ISI Mark
40
Packing Qty
Crimping Profile
Stud Distance
from Barrel
5.5
d1
Total Lenght
Stud Distance
from top
J
2.6
Palm
Width
L
3D-2535
Stud Size
C2
M3
3D Cat
No.
Barrel OD
C1
2.5
Bolt 0
Barrel ID
a
Conductors
mm2
Barrel Length
Crre page Distance
Dimension In mm
200
200
300
200
100
100
Aluminium Tubular Cable Lugs
Compression Type,
Aluminium Terminal ends,
for Crimping to Aluminium Conductors,
Material : Aluminium
Surface : Natural
120
150
185
240
300
400
Packing Qty
a
Tools
Crimping Profile
b
Total Lenght
d2
Crre page Distance
Barrel Length
d3
Stud Distance
from Barrel
Palm
Width
d1
Stud Distance
from top
Stud Size
3D Cat
No.
Barrel OD
Bolt 0
Barrel ID
Conductors
mm2
Dimension In mm
C1
C2
L
J
M 10
3D-2560
14.7
19.6
10.2
28.0
32
15
15
58
73
3D-7
M 12
3D-2561
14.7
19.6
12.7
28.0
32
15
15
58
73
3D-124
M 16
3D-2562
14.7
19.6
16.2
28.0
32
15
15
58
73
3D-88
M 10
3D-2563
16.4
21.5
10.2
30.8
34
17
17
62
79
3D-7
M 12
3D-2564
16.4
21.5
12.7
30.8
34
17
17
62
79
3D-124
M 16
3D-2565
16.4
21.5
16.2
30.8
34
17
17
62
79
M 10
3D-2566
18.4
24.0
10.2
34.5
36
18
18
66
84
3D-7
M 12
3D-2567
18.4
24.0
12.7
34.5
36
18
18
66
84
3D-124
M 16
3D-2568
18.4
24.0
16.2
34.5
36
18
18
66
84
3D-95H
M 12
3D-2569
21.0
28.0
12.7
40.0
44
22
22
80
102
3D-7
M 16
3D-2570
21.0
28.0
16.2
40.0
44
22
22
80
102
3D-124
M 16
3D-2571
23.8
31.0
16.2
45.0
47
27
27
88
115
3D-7
M 20
3D-2572
23.8
31.0
20.3
45.0
47
27
27
88
115
3D-124
M 20
3D-2573
26.8
35.5
20.3
50.8
56
30
31
100
130
3D-7
15
10
50
50
25
30
20
500
M 20
3D-2574
29.9
41.0
20.3
57.8
60
32
33
108
140
3D-150
630
M 20
3D-2575
34.9
46.0
20.3
65.8
59
34
35
120
154
3D-150
5
800
BLK
3D-2576
39.0
51.0
73.3
77
39
39
141
180
3D-150
20
1000
BLK
3D-2577
43.0
57.0
81.5
100
45
45
175
220
3D-150
15
Note : ISI Licence is given for catalogue numbers 3D-2541 Through 3D-2577 (16 mm2 to 1000 mm2)
16-10 3D -2543, 25-12 3D- 2547, 50-12 3D-2553 & 95-16 3D-2559 W/O ISI Mark
41
Aluminium Tubular Cable Lugs
C2
a
d3
d2
d1
C1
b
Compression Type, Long Barrel,
Aluminium Terminal ends,
for Crimping to Aluminium Conductors,
Material : Aluminium
Surface : Natural
J
4.0
6.0
10
16
25
35
50
70
42
4
4
21.5
3D-17
M 3.5
3D-2535E3.5 LB
2.6
5.5
3.5
7
10.5
4
4
21.5
3D-2
d2
b
M4
3D-2536 LB
2.9
5.5
4.2
7
10.5
4
4
21.5
3D-17
M5
3D-2537 LB
2.9
5.5
5.2
12
10.5
5
8
27.5
3D-2
M5
3D-2538E5 LB
3.5
5.5
5.2
8
10.5
6
7
27.5
3D-17
M6
3D-2538 LB
3.5
5.5
6.4
12
10.5
6
7
27.5
3D-2
M6
3D-2539 LB
4.4
7.4
6.4
10
13.5
8
9
34.5
3D-7
M8
3D-2540 LB
4.4
7.4
8.2
15
13.5
8
9
34.5
3D-2
M6
3D-2541 LB
5.4
8.3
6.4
11
19.5
9
11
43.5
3D-7
M8
3D-2542 LB
5.4
8.3
8.2
11
19.5
9
11
43.5
3D-88
M 10
3D-2543 LB
5.4
8.3
10.4
18
19.5
9
11
43.5
M8
3D-2545 LB
7
10
8.2
14
24
10
11
52
3D-7
M 10
3D-2546 LB
7
10
10.4
20
24
10
11
52
3D-124
M 12
3D-2547 LB
7
10
12.7
20
24
10
11
52
3D-95H
M8
3D-2549 LB
8
10.8
8.2
15
27
11
11
56
3D-7
M 10
3D-2550 LB
8
10.8
10.4
20
27
11
11
56
3D-124
M8
3D-2551 LB
9.3
13
8.2
18
33
11
13
65
3D-7
M 10
3D-2552 LB
9.3
13
10.4
23
33
11
13
65
3D-124
M 12
3D-2553 LB
9.3
13
12.7
23
33
11
13
65
M8
3D-2554 LB
11.6
16
8.2
22
39
13
13
73
3D-7
M 10
3D-2555 LB
11.6
16
10.4
22
39
13
13
73
3D-124
M 12
3D-2556 LB
11.6
16
12.7
22
39
13
13
73
Packing Qty
10.5
d3
Tools
Crimping Profile
Stud Distance
from Barrel
7
d1
Total Lenght
Stud Distance
from top
3.5
Palm
Width
5.5
Stud Size
J
2.6
Barrel OD
C2
3D-2535 LB
Barrel ID
C1
M3
3D Cat No.
Barrel Length
2.5
a
Bolt 0
Conductors
mm2
Dimension In mm
200
200
200
200
200
200
300
200
100
Aluminium Tubular Cable Lugs
Compression Type, Long Barrel,
Aluminium Terminal ends,
for Crimping to Aluminium Conductors,
Material : Aluminium
Surface : Natural
C2
a
d3
b
d2
d1
C1
J
95
120
150
185
a
C1
C2
J
M 10
3D-2557 LB
12.9
17.1
10.4
25
42
14
14
78
3D-7
M 12
3D-2558 LB
12.9
17.1
12.7
25
42
14
14
78
3D-124
M 16
3D-2559 LB
12.9
17.1
17.0
25
42
14
14
78
M 10
3D-2560 LB
14.8
19.6
10.4
28
48
15
15
89
3D-7
M 12
3D-2561 LB
14.8
19.6
12.7
28
48
15
15
89
3D-124
M 16
3D-2562 LB
14.8
19.6
17.0
28
48
15
15
89
3D-88
M 10
3D-2563 LB
16.1
21.2
10.4
31
51
17
17
96
3D-7
M 12
3D-2564 LB
16.1
21.2
12.7
31
51
17
17
96
3D-124
M 16
3D-2565 LB
16.1
21.2
17.0
31
51
17
17
96
M 10
3D-2566 LB
18
23.7
10.4
34
54
18
18
102
3D-7
M 12
3D-2567 LB
18
23.7
12.7
34
54
18
18
102
3D-124
Packing Qty
Barrel Length
b
Tools
Crimping Profile
Palm
Width
d2
Total Lenght
Stud Size
d3
Stud Distance
from Barrel
Barrel OD
d1
Stud Distance
from top
Barrel ID
3D Cat No.
Bolt 0
Conductors
mm2
Dimension In mm
100
50
50
25
M 16
3D-2568 LB
18
23.7
17.0
34
54
18
18
102
3D-95H
225
M 12
3D-25225 LB
20.6
27
12.7
39
60
20
20
114
3D-7
240
M 12
3D-2569 LB
22
28
12.7
40
66
22
22
124
3D-7
M 16
3D-2570 LB
22
28
17.0
40
66
22
22
124
3D-124
M 16
3D-2571 LB
24
31
17.0
45.7
70.5
27
27
138.5
3D-7
M 20
3D-2572 LB
24
31
21.0
45.7
70.5
27
27
138.5
3D-124
400
M 20
3D-2573 LB
28
36
21.0
51
84
30
31
158
3D-7
15
500
M 20
3D-2574 LB
30
41
21.0
58
90
32
33
170
3D-150
10
630
M 20
3D-2575 LB
35
46
21.0
66
103.5
34
35
188.5
3D-150
5
800
BLK
3D-2576 LB
39
51
73
115.5
39
39
218.5
3D-150
20
1000
BLK
3D-2577 LB
43.5
57
81
150
45
45
270
3D-150
15
300
30
20
43
aluminium CoNNECTORS
Aluminium Tubular In Line
Connectors for Crimping to
Aluminium Conductors,
Material : Aluminium
Surface : Natural
44
Conductors
mm2
3D Cat No.
Dimension In mm
2.5
3D-2578
4
3D-2579
2.9
6
3D-2580
10
3D-2581
d1
Tools
Crimping
Profile
Packing
Qty
d3
J
5.5
16
3D-17, 3D-2, 3D-88
200
5.5
16
3D-17, 3D-2, 3D-88
200
3.5
5.5
20
3D-17, 3D-2, 3D-88
200
4.4
7.2
20
3D-2, 3D-7, 3D-88
500
2.6
16
3D-2582
5.4
8.3
26
3D-2, 3D-7, 3D-88
500
25
3D-2583
7.0
9.7
34
3D-7, 3D-124, 3D-88
500
35
3D-2584
8.0
10.8
39
3D-7, 3D-124, 3D-95H
300
50
3D-2585
9.3
13.0
44
3D-7,3D-124, 3D-88
200
70
3D-2586
11.3
15.5
53
3D-7,3D-124, 3D-88
100
95
3D-2587
13.2
17.4
58
3D-7,3D-124, 3D-88
80
120
3D-2588
14.7
19.6
63
3D-7,3D-124, 3D-88
50
150
3D-2589
16.4
21.5
67
3D-7,3D-124
50
185
3D-2590
18.4
24.0
72
3D-7,3D-124
50
240
3D-2591
21.0
28.0
86
3D-7,3D-124
30
300
3D-2592
23.8
31.0
96
3D-7,3D-124
25
400
3D-2593
26.8
35.5
110
3D-7,3D-124
15
500
3D-2594
29.9
41.0
111
3D-150
10
630
3D-2595
34.9
46.0
134
3D-150
5
800
3D-2596
39.0
51.0
153
3D-150
10
1000
3D-2597
43.0
57.0
201
3D-150
10
Aluminium CoNNECTORS
d3
d1
Aluminium Tubular In Line Long Barrel
Connectors for Crimping to
Aluminium Conductors,
Material : Aluminium
Surface : Natural
J
Conductors mm2
3D Cat No.
Dimension In mm
d1
Tools
d3
J
Crimping
Profile
Packing
Qty
25
3D-2583-LB
7.2
9.6
82.0
3D-7, 3D-124, 3D-88
500
35
3D-2584-LB
8.3
11.1
90.0
3D-7, 3D-124, 3D-95H
300
50
3D-2585-LB
10.1
13.5
100.0
3D-7,3D-124, 3D-88
200
70
3D-2586-LB
10.2
14.5
104.0
3D-7,3D-124, 3D-88
100
95
3D-2587-LB
12.0
16.9
108.0
3D-7,3D-124, 3D-88
80
120
3D-2588-LB
13.7
19. 0
112.0
3D-7,3D-124, 3D-88
50
150
3D-2589-LB
15.1
21.2
116.0
3D-7,3D-124
50
185
3D-2590-LB
16.6
23.9
128.0
3D-7,3D-124
50
225
3D-225-CLB
18.6
26.1
136.0
3D-7,3D-124
50
240
3D-2591-LB
19.3
27.2
148.0
3D-7,3D-124
30
300
3D-2592-LB
21.8
30.2
160.0
3D-7,3D-124
25
400
3D-2593-LB
25.0
34.8
182.0
3D-7,3D-124
15
500
3D-2594-LB
28.2
39.1
190.0
3D-150
10
630
3D-2595-LB
31.7
44.4
200.0
3D-150
5
800
3D-2596-LB
35.7
49.5
225.0
3D-150
10
1000
3D-2597-LB
41
56.0
250.0
3D-150
10
Note : All Aluminium terminals and connectors can be tin plated upon request
“3D-112” Corrosion Inhibiting Compound
(Based on Recommendations of Aluminium Federation of U.K. / British Standards Institutions spec. G-184/188)
Recommended Practice for Resistance to Corrosion
Whilst Aluminium withstands weathering without protection during many years of service, the use
of a corrosion inhibiting compound is recommended where conditions are particularly aggressive,
such as chemical of salt-laden atmospheres, or where inspection and cleaning are likely to be
irregular.
Such an inhibitor must:
a) not affect electrical properties of the compression joint.
b) be non-corrosive to Aluminium, copper, steel, tin, zinc and combinations of these :
c) not deteriorate on exposure to atmosphere at conductor operating temperatures :
d) have good sealing properties against moisture and contaminating substances in the atmosphere.
e) have a high temperature drop point: This Corrosion Inhibiting Compound “3D-112” made as per British Standards
Institution specification, is recommended for application over the prepared end of the conductor and inside the
ferrule/terminal end, before crimping.
45
WIRE PIN
Copper Reducer,
For Aluminium Conductors
Material : ETP-Copper
Surface-TIN Plated
J
K
d3
C1+C2
d4
d1
d2
A
A1
3D Cat No.
d1
d2
d3
d4
A
A1
K
C1 + C2
J
2.5
3D-3798
2.5
4.7
3.8
3.3
6
5
4
10
20
4
3D-3799
2.8
4.7
3.8
3.3
6
5
4
10
20
6
3D-3800
3.1
4.7
3.8
3.3
6
5
4
10
20
10
3D-3050
4.4
6.2
3.8
3.3
9
8
4
10
23
16
3D-3051
5.3
7.1
3.8
3.3
12
11
5
13
30
25
3D-3801
7
9
6
5.5
12
11
5
15
32
3D-3052
7
9
7.5
6.5
12
11
5
20
37
35
3D-3802
8
10
7.5
6.5
12
11
5
20
37
50
3D-3803
9.2
11.2
7.5
6.5
16
15
5
20
41
70
3D-3804
11.5
13.8
7.5
6.5
18
16
5
20
43
3D-3805
11.5
13.8
11.5
10.5
18
16
5
25
48
3D-3806
11.5
13.8
11.5
10.5
18
16
5
32
55
3D-3807
12.8
15.6
11.5
10.5
20
18
6
25
51
3D-3808
12.8
15.6
7.5
6.5
20
18
6
22
48
3D-3809
12.8
15.6
12.8
11.8
20
18
6
32
58
3D-3810
14.8
17.8
11.8
10.5
22
20
6
25
53
3D-3811
14.8
17.8
7.5
6.5
22
20
6
22
50
3D-3812
14.8
17.8
11.5
10.5
22
20
6
32
60
150
3D-3813
16
19.6
11.5
10.5
26
25
6
32
64
185
3D-3814
18
22
11.5
10.5
32
30
6
32
70
240
3D-3815
22
26
16
15
38
36
8
42
88
300
3D-3816
24
28.7
16
15
42
40
8
42
92
400
3D-3817
28
33.2
15.6
14
46
44
12
32
90
95
120
46
Dimensions in mm
Conductors
mm2
WIRE PIN
Copper Reducer,
For Copper Conductors
Material : ETP-Copper
Surface : Tin Plated
J
K
d3
C1+C2
d4
d1
d2
A
A1
Dimensions in mm
Conductors
mm2
3D Cat No.
d1
d2
d3
d4
A
A1
K
C1 + C2
J
35
3D-3053
8.2
10.6
7.5
7.5
18
12
4
20
37
50
3D-3054
9.5
12.4
7.5
7.5
17
16
4
25
41
70
3D-3055
11.2
14.7
11.5
11.5
19
18
4
25
48
95
3D-3056
13.5
17.5
11.5
11.5
21
20
4
25
51
120
3D-3057
15
19.4
11.5
11.5
24
22
4
25
53
150
3D-3058
16.5
21.5
15.6
15.6
28
26
4
32
64
185
3D-3059
18.5
24
15.6
15.6
34
32
4
32
70
240
3D-3060
21
27.3
15.6
15.6
40
38
6
32
78
300
3D-3061
23.5
30.6
15.6
15.6
44
42
6
32
82
47
WIRE PIN
Aluminium Reducer,
For Aluminium Conductors
Material : Aluminium
J
Surface : Natural
K
d3
C1+C2
d4
d1
d2
A
A1
3D Cat No.
d1
d2
d3
d4
A
K
C1 + C2
J
2.5
3D-3798 AL
2
5.5
4.5
4
7
4
10
21
3D-3798 AL1
2.6
5.5
3.3
3.3
7
4
10
21
3D-3799 AL
2.9
5.5
4.5
4
7
4
10
21
3D-3799 AL1
2.9
5.5
3.8
3.3
7
4
10
21
3D-3800 AL
3.5
5.5
4.5
4
7
4
10
21
3D-3800 AL1
3.5
5.5
4.8
3.3
7
4
10
21
3D-3050 AL
3.8
7.4
4.5
4
9
4
10
23
3D-3050 AL1
3.8
7.4
3.8
3.3
9
4
10
23
3D-3050 AL2
4.4
7.4
4.5
4
9
4
10
23
3D-3050 AL3
4.4
7.4
3.8
3.3
9
4
10
23
3D-3051 AL
5.4
8.3
6
5.5
13
5
15
33
3D-3051 AL1
5.4
8.3
6
5.5
13
5
20
38
3D-3051 AL2
5.4
8.3
3.8
3.3
13
5
13
31
3D-3801 AL
7
10
6
5.5
16
5
15
36
3D-3052 AL
7
10
7.5
6.5
16
5
20
41
35
3D-3802 AL
8
10.8
7.5
6.5
18
5
20
43
50
3D-3803 AL
9.3
13
7.5
6.5
22
5
20
47
3D-3803 AL1
10.4
14
14
13
22
7
24
53
4
6
10
16
25
48
Dimensions in mm
Conductors
mm2
WIRE PIN
Aluminium Reducer,
For Aluminium Conductors
Material : Aluminium
J
Surface : Natural
K
d3
C1+C2
d4
d1
d2
A
A1
Dimensions in mm
Conductors
mm2
3D Cat No.
70
95
120
150
185
240
300
d1
d2
d3
d4
A
K
C1 + C2
J
3D-3804 AL
11.6
16
7.5
6.5
26
5
20
51
3D-3805 AL
11.6
16
11.5
10.5
26
5
25
56
3D-3806 AL
11.6
16
11.5
10.5
26
5
32
63
3D-3807 AL
12.9
17.1
11.5
10.5
28
6
25
59
3D-3808 AL
12.9
17.1
15.6
14
28
6
27
61
3D-3809 AL
12.9
17.1
7.5
6.5
28
6
22
56
3D-3809 AL1
12.9
17.1
12.8
11.8
28
6
32
66
3D-3810 AL
14.8
19.6
11.5
10.5
32
6
25
63
3D-3811 AL
14.8
19.6
7.5
6.5
32
6
27
60
3D-3812 AL
14.8
19.6
11.5
10.5
32
6
22
70
3D-3812 AL1
14.8
19.6
15.6
14
32
6
32
70
3D-3813 AL
16.1
21.2
15.6
14
34
6
32
72
3D-3813 AL1
16.1
21.2
11.5
10.5
34
6
32
72
3D-3814 AL
18
23.7
15.6
14
36
6
32
74
3D-3814 AL1
18
23.7
11.5
10.5
36
6
32
74
3D-3815 AL
22
28
16
15
44
8
42
94
3D-3815 AL1
22
28
15.6
14
44
8
32
84
3D-3816 AL
24
31
16
15
47
8
42
97
3D-3816 AL1
24
31
15.6
14
47
8
32
87
49
End-sleeves
With Insulating Sleeve, DIN 46228, Part 4
Material: ETP-Copper
Surface: Tin Plated
Insulated: Free of Halide
Synthetic Material: Polypropylene
Conductors
mm2
0.5
Dimension In mm
3D Cat No.
d1
d2
S1
3D-8004 H
1.0
2.6
0.15
3D-8147 H
3D-8035 H
0.75
3D-8005 H
1.2
2.8
0.15
3D-8149 H
3D-8036 H
1
3D-8154 H
1.4
3.0
0.15
3D-8007 H
1.5
3D-8159 H
1.7
3.5
0.15
3D-8009 H
3D-8038 H
2.5
3D-8162 H
2.2
4.2
0.15
3D-8011 H
4
3D-8012 H
2.8
4.8
0.2
3D-8013 H
I2
12.0
6.0
14.0
8.0
16.0
10.0
12.0
6.0
14.0
8.0
16.0
10.0
14.0
8.0
16.0
10.0
14.0
8.0
16.0
10.0
24.0
18.0
14.0
8.0
18.0
12.0
17.0
10.0
20.0
12.0
Colour
Group II
Tools
Packing
Qty
3D-48
1000
WHITE
3D-52
3D-48
GREY
RED
3D-48
BLUE
GREY
1000
3D-52
3D-48
BLACK
1000
3D-52
1000
3D-52
3D-48
1000
3D-52
3D-48
1000
3D-52
6
3D-8015 H
3.5
6.3
0.2
20.0
12.0
YELLOW
3D-48
3D-52
100
10
3D-8017 H
4.5
7.6
0.2
22.0
12.0
RED
3D-48
100
16
3D-8020 H
5.8
8.8
0.2
24.0
12.0
BLUE
3D-48
3D-53
100
25
3D-8046 H
7.3
11.2
0.2
30.0
16.0
3D-110
100
32.0
18.0
3D-8047 H
50
I1
YELLOW
35
3D-8050 H
8.3
12.7
0.2
30.0
16.0
RED
3D-110
100
50
3D-8053 H
10.3
15.0
0.3
36.0
20.0
BLUE
3D-110
100
end sleeves
Twin Type, with Insulating Sleeve
Material: ETP-Copper + PVC
Surface: Tin Plated
Insulated: Free of Halide
Synthetic Material: Polypropylene
l1
d2
d1
l2
s1
s2
Dimension In mm
Conductors
mm2
3D Cat No.
d1
d2
S1
S2
l1
l2
0.5-8*2
3D-7000
1.5
4.7
0.15
0.35
15.0
8.0
0.75-8*2
3D-7001
1.8
5.0
0.15
0.35
15.0
8.0
0.75-10*2
3D-7002
1.8
5.0
0.15
0.35
17.0
10.0
1.0-8*2
3D-7003
2.0
5.4
0.15
0.40
15.0
8.0
1.0-10*2
3D-7004
2.0
5.4
0.15
0.40
17.0
10.0
1.5-8*2
3D-7005
2.2
6.6
0.15
0.40
16.0
8.0
1.5-12*2
3D-7006
2.2
6.6
0.15
0.40
20.0
12.0
2.5-10*2
3D-7007
2.8
7.8
0.20
0.40
18.5
10.0
2.5-13*2
3D-7008
2.8
7.8
0.20
0.40
21.5
13.0
4.0-12*2
3D-7009
3.7
8.8
0.20
0.50
23.0
12.0
6.0-14*2
3D-7010
4.8
10.0
0.20
0.50
26.0
14.0
10-14*2
3D-7011
6.4
13.0
0.20
0.60
26.0
14.0
16-14*2
3D-7012
8.3
18.4
0.30
0.60
30.0
14.0
Colour
WHITE
GREY
RED
BLACK
BLUE
GREY
YELLOW
RED
BLUE
51
End-sleeves
W/O Insulating Sleeve, DIN 46228, Part 1
Material: ETP-Copper
Surface: Tin Plated
Conductors
mm2
0.5
0.75
1
1.5
2.5
4
6
10
16
52
Dimension In mm
3D Cat No.
d1
d2
S
L1
L2
Tools
Packing
Qty.
1000
3D-8004
1.0
1.7
0.15
6
5.3
3D-48
3D-8035
1.0
1.7
0.15
10
9.3
3D-52
3D-8005
1.2
2.2
0.15
6
5.3
3D-48
3D-8036
1.2
2.2
0.15
10
9.3
3D-52
3D-8006
1.4
2.4
0.15
6
5.3
3D-48
3D-8007
1.4
2.4
0.15
10
9.3
3D-52
3D-8008
1.7
2.8
0.15
7
6.0
3D-48
3D-8009
1.7
2.8
0.15
10
9.0
3D-52
11.0
3D-8037
1.7
2.8
0.15
12
3D-8010
2.3
3.4
0.15
7
6.0
3D-48
3D-8039
2.3
3.4
0.15
10
9.0
3D-52
11.0
3D-8011
2.3
3.4
0.15
12
3D-8012
2.8
4.0
0.2
9
8.0
3D-48
3D-8013
2.8
4.0
0.2
12
11.0
3D-52
3D-8014
3.5
4.7
0.2
10
9.0
3D-48
3D-8015
3.5
4.7
0.2
12
11.0
3D-52
3D-8016
3.5
4.7
0.2
15
14.0
3D-8043
3.5
4.7
0.2
18
17.0
3D-8017
4.5
5.8
0.2
12
10.8
3D-48
3D-8018
4.5
5.8
0.2
15
13.8
3D-53
3D-8019
4.5
5.8
0.2
18
16.8
3D-8020
5.8
7.5
0.2
12
10.5
3D-48
3D-8021
5.8
7.5
0.2
15
13.5
3D-53
3D-8022
5.8
7.5
0.2
18
16.5
1000
1000
1000
1000
1000
250
250
250
end sleeves
W/O Insulating Sleeve, DIN 46228, Part 1
Material: ETP-Copper
Surface: Tin Plated
Conductors
mm2
25
35
50
70
95
120
150
185
Dimension In mm
3D Cat No.
d1
d2
S
L1
L2
Tools
Packing
Qty.
3D-110
250
3D-110
100
3D-110
100
3D-110
100
3D-110
100
3D-110
50
3D-110
50
3D-110
25
3D-8046
7.3
9.5
0.2
15
13.0
3D-8047
7.3
9.5
0.2
18
16.0
3D-8048
7.3
9.5
0.2
25
23.0
3D-8049
7.3
9.5
0.2
32
29.0
3D-8050
8.3
10.5
0.2
18
16.0
3D-8051
8.3
10.5
0.2
25
23.0
30.0
3D-8052
8.3
10.5
0.2
32
3D-8053
10.3
13.0
0.3
18
15.0
3D-8054
10.3
13.0
0.3
25
22.0
3D-8055
10.3
13.0
0.3
32
29.0
3D-8056
13.5
15.5
0.4
25
22.0
3D-8057
13.5
15.5
0.4
32
29.0
3D-8058
14.7
17.0
0.4
25
22.0
3D-8059
14.7
17.0
0.4
32
29.0
3D-8060
16.7
19.0
0.45
32
29.0
3D-8061
16.7
19.0
0.45
40
37.0
3D-8062
19.5
21.5
0.5
32
29.0
3D-8063
19.5
21.5
0.5
40
37.0
3D-8064
20.0
23.5
0.6
32
29.0
3D-8065
20.0
23.5
0.6
40
37.0
53
Sheet Metal Lugs
Ring Type
Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
Dimensions in mm
Conductors
mm2
d1
d3
d2
b
s
a
C2
I
J
Tools
0.5
M2
3D-1263
1.6
3.2
2.2
6
0.8
5
6
11
14
3D-2
To 1.5mm²
M 2.5
3D-1242
1.6
3.2
2.6
6
0.8
5
6
11
14
3D-17
2.5mm²
54
Bolt 0
3D Cat
No.
M3
3D-1247
1.6
3.2
3.2
6
0.8
5
6
11
14
M3
3D-1260
1.6
3.2
3.2
6.8
0.8
5
4.6
9.6
13
M3
3D-1265
1.6
3.2
3.2
8
0.8
5
7
12
16
M 3.5
3D-1269
1.6
3.2
3.7
6
0.8
5
6
11
14
M 3.5
3D-1257
1.6
3.2
3.7
6.8
0.8
5
4.6
9.6
13
M4
3D-1241
1.6
3.2
4.2
6
0.8
5
6
11
14
M4
3D-1258
1.6
3.2
4.2
6.8
0.8
5
4.6
9.6
13
M4
3D-1246
1.6
3.2
4.2
8
0.8
5
7
12
16
14.5
M4
3D-1261
1.6
3.2
4.2
7
0.8
5
6
11
M4
3D-1266
1.6
3.2
4.2
10
0.8
5
8
13
18
M5
3D-1262
1.6
3.2
5.2
8
0.8
5
7
12
16
M5
3D-1267
1.6
3.2
5.2
10
0.8
5
8
13
18
M6
3D-1224
1.6
3.2
6.4
10
0.8
5
8
13
18
M6
3D-1268
1.6
3.2
6.4
12
0.8
5
7
12
18
M8
3D-1252
1.6
3.2
8.2
12
0.8
5
12
17
23
M 3
3D-1308
2.3
3.9
3.2
6.5
0.8
5
4.5
9.5
12.7
3D-2
M 3.5
3D-1292
2.3
3.9
3.7
6.5
0.8
5
4.5
9.5
12.7
3D-17
M 3.5
3D-1309
2.3
3.9
3.7
8
0.8
5
7
12
16
M4
3D-1296
2.3
3.9
4.2
8
0.8
5
7
12
16
M5
3D-1304
2.3
3.9
5.2
8
0.8
5
7
12
16
M5
3D-1310
2.3
3.9
5.2
10
0.8
5
8
13
18
M5
3D-1313
2.3
3.9
5.2
12
0.8
5
11
16
22
M6
3D-1342
2.3
3.9
6.4
10
0.8
5
8
13
18
M6
3D-1305
2.3
3.9
6.4
12
0.8
5
11
16
22
M6
3D-1314
2.3
3.9
6.4
16
0.8
5
12
17
25
M8
3D-1307
2.3
3.9
8.2
12
0.8
5
11
16
22
M8
3D-1311
2.3
3.9
8.2
16
0.8
5
12
17
25
M 10
3D-1287
2.3
3.9
10.2
16
0.8
5
12
17
25
M 10
3D-1524
2.3
3.9
10.2
18
0.8
5
15
20
29
M 12
3D-1438
2.3
3.9
12.7
18
0.8
5
15
20
29
Crimping
Profile
Packing
Qty
200
200
Sheet Metal Lugs
Ring Type
Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
Dimension in mm
d1
d3
d2
b
s
a
C2
I
J
3D-1432
3.5
5.5
3D-1435
3.5
5.5
4.2
8
1
6
7
13
17
3D-17
4.2
10
1
6
8
14
19
3D-2
M5
3D-1431
3.5
5.5
M5
3D-1408
3.5
5.5
5.2
8
1
6
7
13
17
5.2
10
1
6
8
14
M5
3D-1433
3.5
19
5.5
5.2
8
1
6
12.8
M5
3D-1405
M5
3D-1404
3.5
5.5
5.2
12
1
6
8
14
20
3.5
5.5
5.2
12
1
6
10
16
M6
22
3D-1415
3.5
5.5
6.4
12
1
6
8
14
20
M6
3D-1417
3.5
5.5
6.4
12
1
6
10
16
22
M6
3D-1406
3.5
5.5
6.4
14
1
6
12.5
M8
3D-1416
3.5
5.5
8.2
12
1
6
8
M8
3D-1421
3.5
5.5
8.2
14
1
6
12.5
M8
3D-1407
3.5
5.5
8.2
16
1
6
16
22
30
M8
3D-1429
3.5
5.5
8.2
18
1
6
15
21
30
M9
3D-1410
3.5
5.5
9.7
14
1
6
12.5
Conductors
mm2
Bolt 0
3D Cat No.
4mm²
M4
To 6mm²
M4
10mm²
Tools
Crimping
Profile
Packing
Qty
200
18.8 22.8
18.5 25.5
14
20
18.5 25.5
18.5 25.5
M 10
3D-1427
3.5
5.5
10.2
16
1
6
16
22
30
M 10
3D-1428
3.5
5.5
10.2
18
1
6
15
21
30
M 12
3D-1430
3.5
5.5
12.7
18
1
6
15
21
30
M4
3D-1463
4.3
6.3
4.2
10
1
8
9
17
22
M4
3D-1464
4.3
6.3
4.2
10
1
8
7
15
20
M5
3D-1459
4.3
6.3
5.2
10
1
8
9
17
22
M5
3D-1460
4.3
6.3
5.2
10
1
8
7
15
20
M6
3D-1465
4.3
6.3
6.4
12
1
8
9
17
23
M8
3D-1466
4.3
6.3
8.2
16
1
8
11
19
27
M8
3D-1467
4.3
6.3
8.2
18
1
8
13
21
30
M 10
3D-1461
4.3
6.3
10.2
18
1
8
13
21
30
M 10
3D-1468
4.3
6.3
10.2
22
1
8
15
23
34
M 12
3D-1462
4.3
6.3
12.7
22
1
8
15
23
34
3D-2
200
55
Sheet Metal Lugs
d
Ring Type
Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
S
J
I
a
d
M
d
b
c
Dimension in mm
Conductors
Bolt 0
mm2
16mm²
25mm²
35mm²
56
3D Cat
No.
d1
d3
d2
b
s
a
Packing Qty
C2
I
J
Tools
M5
3D-1516
5.6
8
5.2
10
1.2
10
9
19
24
3D-2
M5
3D-1517
5.6
8
5.2
12
1.2
10
10
20
26
3D-109
M6
3D-1511
5.6
8
6.4
12
1.2
10
10
20
26
M6
3D-1518
5.6
8
6.4
16
1.2
10
12
22
30
M8
3D-1512
5.6
8
8.2
16
1.2
10
12
22
30
M8
3D-1519
5.6
8
8.2
18
1.2
10
14
24
33
M9
3D-1513
5.6
8
9.7
16
1.2
10
12
22
30
M 10
3D-1514
5.6
8
10.2
18
1.2
10
14
24
33
M 10
3D-1520
5.6
8
10.2
22
1.2
10
14
24
35
M 12
3D-1515
5.6
8
12.7
22
1.2
10
14
24
35
M6
3D-1561
7.5
11.1
6.4
12
1.8
11
14
25
31
M6
3D-1557
7.5
11.1
6.4
16
1.8
11
11
22
30
M6
3D-1558
7.5
11.1
6.4
16
1.8
11
14
25
33
M8
3D-1556
7.5
11.1
8.2
12
1.8
11
14
25
31
M8
3D-1552
7.5
11.1
8.2
16
1.8
11
11
22
30
M8
3D-1554
7.5
11.1
8.2
16
1.8
11
14
25
33
M 10
3D-1553
7.5
11.1 10.2
16
1.8
11
11
22
30
M 10
3D-1559
7.5
11.1 10.2
18
1.8
11
14
25
34
M 10
3D-1560
7.5
11.1 10.2
22
1.8
11
20
31
42
M 12
3D-1555
7.5
11.1 12.7
22
1.8
11
20
31
42
M6
3D-1584
9
12.6
6.4
16
1.8
12
11
23
31
M8
3D-1581
9
12.6
8.2
16
1.8
12
11
23
31
M8
3D-1585
9
12.6
8.2
18
1.8
12
15
27
36
M8
3D-1582
9
12.6 10.8
18
1.8
12
15
27
36
M8
3D-1586
9
12.6 10.2
22
1.8
12
19
31
42
M8
3D-1583
9
12.6 12.7
22
1.8
12
19
31
42
3D-109
Crimping
Profile
200
200
300
300
3D-109
400
Sheet Metal Lugs
Ring Type
Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
Dimension in mm
Conductors
Bolt 0
mm2
50mm²
70mm²
95mm²
120mm²
150mm²
3D Cat
No.
d1
d3
Packing Qty
d2
b
s
a
C2
I
J
M8
3D-1609 10.5 14.1
8.2
18
1.8
16
18
34
43
M 10
3D-1607 10.5 14.1 10.2
18
1.8
16
18
34
43
M 10
3D-1610 10.5 14.1 10.2
22
1.8
16
16
32
43
M 10
3D-1611 10.5 14.1 10.2
24
1.8
16
20
36
48
M 12
3D-1608 10.5 14.1 12.7
24
1.8
16
20
36
48
M 16
3D-1612 10.5 14.1 16.2
32
1.8
16
22
38
54
M 10
3D-1637
12
16
10.4
22
2
18
18
36
47
M 12
3D-1636
12
16
12.7
22
2
18
18
36
47
M 12
3D-1638
12
16
12.7
24
2
18
18
36
48
M 16
3D-1639
12
16
16.2
28
2
18
22
40
54
M 10
3D-1651 13.5 18.1 10.2
22
2.3
20
15
35
46
M 10
3D-1652 13.5 18.1 10.2
24
2.3
20
20
38
50
M 12
3D-1650 13.5 18.1 12.7
24
2.3
20
18
38
50
M 16
3D-1653 13.5 18.1 16.2
28
2.3
20
24
44
58
M 12
3D-1658
15
20.2 12.7
26
2.6
22
17
39
52
M 16
3D-1659
15
20.2 16.2
32
2.6
22
26
48
64
M 20
3D-1660
15
20.2 20.3
40
2.6
22
30
52
72
M 12
3D-1668 16.5 23.7 12.7
34
3.6
24
25
49
66
M 16
3D-1666 16.5 23.7 16.2
34
3.6
24
25
49
66
M 16
3D-1669 16.5 23.7 16.2
40
3.6
24
30
54
74
M 20
3D-1667 16.5 23.7 20.3
40
3.6
24
30
54
74
Tools
Crimping
Profile
3D-109
200
3D-109
150
3D-109
100
3D-109
100
80
3D-109
50
57
Sheet Metal Lugs
d
3
Ring Type, With Insulating Sleeve
Material: ETP-Copper With PVC Sleeve
Surface: Tin Plated
Dimension in mm
Conductors
mm2
0.5 To 1.5
mm2
2.5 mm2
Bolt 0
M2
3D Cat
No.
d1
d2
b
s
a
Packing Qty
C2
I
J
3D-3076 1.6
3.2
2.2
6
0.8
5
4
16
19
M 2.5 3D-3077 1.6
3.2
2.6
6
0.8
5
4
16
19
M3
3D-3078 1.6
3.2
3.2
6
0.8
5
4
16
19
M3
3D-3081 1.6
3.2
3.2
6.8
0.8
5
3.6
14.6
18
M3
3D-3084 1.6
3.2
3.2
8
0.8
5
5
17
21
M 3.5 3D-3079 1.6
3.2
3.7
6
0.8
5
4
16
19
M 3.5 3D-3082 1.6
3.2
3.7
6.8
0.8
5
3.8
14.6
18
M4
3D-3080 1.6
3.2
4.2
6
0.8
5
4
16
19
M4
3D-3083 1.6
3.2
4.2
6.8
0.8
5
3.6
14.6
18
M4
3D-3085 1.6
3.2
4.2
8
0.8
5
5
17
21
M4
3D-3087 1.6
3.2
4.2
7.2
0.8
5
5
16
19.5
M4
3D-3088 1.6
3.2
4.2
10
0.8
5
6
18
23
M5
3D-3086 1.6
3.2
5.2
8
0.8
5
5
17
21
Tools
200
200
M5
3D-3074 1.6
3.2
5.2
10
0.8
5
6
18
23
3D-3089 1.6
3.2
6.4
10
0.8
5
6
18
23
M6
3D-3090 1.6
3.2
6.4
12
0.8
5
6
17
23
M3
3D-3126 2.3
3.9
3.2
6.5
0.8
5
3.5
14.5 17.7 3D-41
M 3.5 3D-3127 2.3
3.9
3.7
6.5
0.8
5
3.5
14.5 17.7
M4
3D-3129 2.3
3.9
3.7
8
0.8
5
5
17
21
3.9
4.2
8
0.8
5
5
17
21
M5
3D-3130 2.3
3.9
5.2
8
0.8
5
5
17
21
M5
3D-3131 2.3
3.9
5.2
10
0.8
5
7
18
23
27
M5
3D-3133 2.3
3.9
5.2
12
0.8
5
9
21
M6
3D-3132 2.3
3.9
6.4
10
0.8
5
7
18
23
M6
3D-3134 2.3
3.9
6.4
12
0.8
5
9
21
27
M6
3D-3136 2.3
3.9
6.4
16
0.8
5
10
22
30
M8
3D-3135 2.3
3.9
8.2
12
0.8
5
9
21
27
Crimping
Profile
3D-41
M6
M 3.5 3D-3128 2.3
58
d3
Sheet Metal Lugs
d
3
Ring Type, With Insulating Sleeve
Material: ETP-Copper With PVC Sleeve
Surface: Tin Plated
Dimension in mm
Conductors
mm2
2.5 mm2
4 - 6 mm2
Bolt
0
M8
3D Cat
No.
d1
d3
d2
b
s
a
C2
I
J
3D-3137 2.3
3.9
8.2
16
0.8
5
10
22
30
M 10 3D-3138 2.3
3.9
10.2
16
0.8
5
10
22
30
M 10 3D-3139
2.3
3.9
10.2
18
0.8
5
14
25
34
M 12 3D-3140
2.3
3.9
12.7
18
0.8
5
14
25
34
M4
3D-3196
3.5
5.5
4.2
8
1
6
5
21
25
M5
3D-3197
3.5
5.5
5.2
8
1
6
5
21
25
M4
3D-3198 3.5
5.5
4.3
10
1
6
5
22
27
M5
3D-3199 3.5
5.5
5.2
10
1
6
5
22
27
M5
3D-3200 3.5
5.5
5.2
8
1
6
9.8
26
30
M5
3D-3201 3.5
5.5
5.2
12
1
6
6
22
28
M5
3D-3204 3.5
5.5
5.2
12
1
6
7
24
30
M6
3D-3202 3.5
5.5
6.4
12
1
6
6
22
28
M6
3D-3205 3.5
5.5
6.4
12
1
6
7
24
30
M6
3D-3206 3.5
5.5
6.4
14
1
6
10.5
26.5
33.5
M8
3D-3203 3.5
5.5
8.2
12
1
6
6
22
28
M8
3D-3207 3.5
5.5
8.2
14
1
6
10.5
26.5
33.5
M8
3D-3209 3.5
5.5
8.2
16
1
6
13
30
38
M8
3D-3211 3.5
5.5
8.2
18
1
6
12
29
38
M9
3D-3208 3.5
5.5
9.7
14
1
6
10.5
26.5
33.5
M 10 3D-3210 3.5
5.5
10.2
16
1
6
13
30
38
M 10 3D-3212
3.5
5.5
10.2
18
1
6
12
29
38
M 12 3D-3213
3.5
5.5
12.7
18
1
6
12
29
38
Tools
Crimping
Profile
Packing
Qty
200
3D-41
200
59
Sheet Metal Lugs
d
3
Ring Type Double Grip
With Insulating Sleeve
Material: ETP-Copper + PVC Sleeve
Surface: Tin Plated
Dimension in mm
Conductors mm2
0.5
To
1.5mm²
2.5mm²
60
Bolt 0
3D Cat
No.
d1
b
d2
s
a
d3
C2
I
3D-41
200
200
3D-3337
1.6
6
2.6
0.8
5
3.2
4
16
19
M3
3D-3338
1.6
6
3.2
0.8
5
3.2
4
16
19
M3
3D-3341
1.6
6.8
3.2
0.8
5
3.2
3D-3344
1.6
8
3.2
0.8
5
3.2
3.6 14.6
5
17
18
21
M 3.5
3D-3366
1.6
7.2
3.7
0.8
5
3.2
4
17.4
21
M 3.5
3D-3339
1.6
6
3.7
0.8
5
3.2
4
16
19
M 3.5
3D-3342
1.6
6.8
3.7
0.8
5
3.2
M4
3D-3340
1.6
6
4.2
0.8
5
3.2
3.8 14.6
4
16
3.6 14.6
Packing
Qty
Tools
M 2.5
M3
Crimping
Profile
J
18
19
M4
3D-3343
1.6
6.8
4.2
0.8
5
3.2
M4
3D-3345
1.6
8
4.2
0.8
5
3.2
5
17
21
18
19.5
M4
3D-3347
1.6
7
4.2
0.8
5
3.2
5
16
M4
3D-3348
1.6
10
4.2
0.8
5
3.2
6
18
23
M5
3D-3346
1.6
8
5.2
0.8
5
3.2
5
17
21
M5
3D-3349
1.6
10
5.2
0.8
5
3.2
6
18
23
M6
3D-3350
1.6
10
6.4
0.8
5
3.2
6
18
23
M6
3D-3351
1.6
12
6.4
0.8
5
3.2
6
17
23
M3
3D-3382
2.3
6.5
3.2
0.8
5
3.9
3.5 14.5 17.8 3D-41
M 3.5
3D-3383
2.3
6.5
3.7
0.8
5
3.9
3.5 14.5 17.7
M 3.5
3D-3384
2.3
8
3.7
0.8
5
3.9
5
17
21
M4
3D-3385
2.3
8
4.2
0.8
5
3.9
5
17
21
M5
3D-3386
2.3
8
5.2
0.8
5
3.9
5
17
21
M5
3D-3387
2.3
10
5.2
0.8
5
3.9
7
18
23
M5
3D-3389
2.3
12
5.2
0.8
5
3.9
9
21
27
M6
3D-3388
2.3
10
6.4
0.8
5
3.9
7
18
23
M6
3D-3390
2.3
12
6.4
0.8
5
3.9
9
21
27
M6
3D-3392
2.3
16
6.4
0.8
5
3.9
10
22
30
M8
3D-3391
2.3
12
8.2
0.8
5
3.9
9
21
27
M8
3D-3393
2.3
16
8.2
0.8
5
3.9
10
22
30
M 10
3D-3394
2.3
16
10.2
0.8
5
3.9
10
22
30
M 10
3D-3395
2.3
18
10.2
0.8
5
3.9
14
25
34
M 12
3D-3396
2.3
18
12.7
0.8
5
3.9
14
25
34
Sheet Metal Lugs
d
3
Ring Type Double Grip
With Insulating Sleeve
Material: ETP-Copper + PVC Sleeve
Surface: Tin Plated
Dimension in mm
Conductors
mm2
4 - 6mm²
Bolt
0
3D Cat
No.
d1
d3
d2
b
s
a
C2
I
J
Tools
3D-41
M4
3D-3493
3.5
5.5
4.2
8
1
6
5
22
26
M4
3D-3495
3.5
5.5
4.2
10
1
6
5
23
28
M5
3D-3494
3.5
5.5
5.2
8
1
6
5
22
26
M5
3D-3496
3.5
5.5
5.2
10
1
6
5
23
28
M5
3D-3497
3.5
5.5
5.2
8
1
6
9.8
27.8
31.8
M5
3D-3498
3.5
5.5
5.2
12
1
6
6
23
29
M5
3D-3501
3.5
5.5
5.2
12
1
6
7
25
31
M6
3D-3499
3.5
5.5
6.4
12
1
6
6
23
29
M6
3D-3502
3.5
5.5
6.4
12
1
6
7
25
31
M6
3D-3503
3.5
5.5
6.4
14
1
6
M8
3D-3500
3.5
5.5
8.2
12
1
6
M8
3D-3504
3.5
5.5
8.2
14
1
6
10.5 27.5
6
23
10.5 27.5
Packing
Qty
200
34.5
29
34.5
M8
3D-3506
3.5
5.5
8.2
16
1
6
13
31
39
M8
3D-3508
3.5
5.5
8.2
18
1
6
12
30
39
M9
10.5 27.5
Crimping
Profile
3D-3505
3.5
5.5
9.7
14
1
6
M 10 3D-3507
3.5
5.5 10.2
16
1
6
13
30
34.5
39
M 10 3D-3509
3.5
5.5 10.2
18
1
6
12
30
39
M 12 3D-3510
3.5
5.5 12.7
18
1
6
12
30
39
61
Sheet Metal Lugs
Tailormade Ring Type,
Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
b
d2
a
I
J
s
d3
d1
Dimension in mm
Conductors mm2
62
Bolt 0
3D Cat No.
d1
d3
d2
b
s
a
I
J
Tools
4
5
3D-1368
3.1
5.5
5.2
10
1.2
6
14
19
3D-17
4
6
3D-1370
3.1
5.5
6.4
12
1.2
6
16
22
3D-2
4-6
8
3D-1421D DDI
3.6
6.2
8.2
16
1.3
8
28.5 36.5
3D-17
4-6
10
3D-1427D DDI
3.8
6.2
10.2
16
1.2
8
28.5 36.5
3D-2
11.5 15.5 16.2
70
16
3D-1639D BHE
95
16
3D-1653D BHE
14
19
16.2
Crimping
Profile
Packing
Qty
200
200
32
2
28
54
70
3D-109
150
32
2.5
32
72
88
3D-109
100
Sheet Metal Lugs
Fork Type , Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
Dimension in mm
Conductors mm2
Bolt 0
3D Cat No.
0.5
M2
To 1.5mm2
M3
2.5mm2
d1
b
d2
s
a
d3
I
J
3D-1709
1.6
4.6
2.3
0.8
5.0
3.2
10.6
13
3D-17
3D-1923
1.6
6.0
3.1
0.8
5.0
3.2
11.0
14
3D-2
M 3.5
3D-1699
1.6
6.8
3.6
0.8
5.0
3.2
11.1 14.5
M 3.5
3D-1700
1.6
6.0
3.6
0.8
5.0
3.2
11.0
14
M4
3D-1701
1.6
8.0
4.1
0.8
5.0
3.2
12.0
16
Tools
M4
3D-1704
1.6
6.5
4.1
0.8
5.0
3.2
11.0
15
M5
3D-1875
1.6
8.0
5.1
0.8
5.0
3.2
12.0
16
M5
3D-1702
1.6
10.0
5.1
0.8
5.0
3.2
13.0
18
M5
3D-1698
1.6
8.0
5.1
0.8
5.0
3.2
17.0
21
M3
3D-1902
2.4
5.6
3.1
0.8
5.0
4
10.0
14
3D-17
M3
3D-1889
2.3
6.0
3.1
0.8
5.0
3.9
11.0
14
3D-2
M 3.5
3D-1890
2.3
6.0
3.6
0.8
5.0
3.9
11.0
14
M 3.5
3D-1884
2.3
6.5
3.6
0.8
5.0
3.9
11.8
15
M4
3D-1898
2.3
6.5
4.1
0.8
5.0
3.9
11.8
15
M4
3D-1891
2.3
8.0
4.1
0.8
5.0
3.9
12.0
16
M5
3D-1892
2.3
10.0
5.1
0.8
5.0
3.9
14.0
19
M5
3D-1903
2.6
10.6
5.0
1.0
6.2
4.6
15.7
21
M6
3D-1896
2.3
10.0
6.5
0.8
5.0
3.9
14.0
19
4mm2
M3
3D-1906
3.5
6.0
3.1
1.0
6.0
5.5
11.5
15
3D-17
To 6mm2
M 3.5
3D-1907
3.5
6.0
3.6
1.0
6.0
5.5
11.0
15
3D-2
10mm2
16mm
M4
3D-1733
3.5
8.0
4.1
1.0
6.0
5.5
13.0 18.5
M4
3D-1914
3.6
8.0
4.1
1.0
6.0
5.6
14.0
M5
3D-1734
3.5
8.0
5.1
1.0
6.0
5.5
13.0 18.5
Crimping
Profile
Packing
Qty
200
200
200
18
M5
3D-1916
3.6
10.0
5.1
1.0
6.0
5.6
15.0
M6
3D-1915
3.6
11.0
6.4
1.0
6.0
5.6
16.0 21.5
20
M6
3D-1917
4.5
16.0
6.5
1.2
8.0
6.9
19.0
27
M8
3D-1918
4.5
16.0
8.2
1.2
8.0
6.9
19.0
27
M5
3D-1922
5.3
10.0
5.1
1.2
10.0
7.7
20.0
26
3D-2
200
3D-2
200
63
Sheet Metal Lugs
Fork Type with Insulating Sleeve
Material: ETP-Copper With PVC Sleeve
Surface: Tin Plated
Dimension in mm
Conductors
mm2
0.5
To 1.5mm2
2.5mm2
4mm2
To 6mm2
64
Bolt 0
3D Cat
No.
d1
b
d2
s
a
a-1
d3
I
J
M2
3D-3695
1.6
4.6
2.3
0.8
5
11
3.2
15.2
18
M3
3D-3640
1.6
6
3.1
0.8
5
11
3.2
16
19
M 3.5 3D-3641
1.6
6
3.6
0.8
5
11
3.2
16
19
M 3.5 3D-3639
1.6
6.8
3.5
0.8
5
11
3.2
15
19
M4
3D-3647
1.6
6.5
4.1
0.8
5
11
3.2
16
20
M4
3D-3642
1.6
8
4.1
0.8
5
11
3.2
17
21
M5
3D-3650
1.6
8
5.1
0.8
5
11
3.2
17
21
M5
3D-3643
1.6
10
5.1
0.8
5
11
3.2
19
23
M5
3D-3638
1.6
8
5.1
0.8
5
11
3.2
22
26
M3
3D-3671
2.4
5.6
3.1
0.8
5
11
4
15
19
M3
3D-3661
2.3
6
3.1
0.8
5
11
3.9
16
19
M 3.5 3D-3662
2.3
6
3.6
0.8
5
11
3.9
16
19
M 3.5 3D-3657
2.3
6.5
3.5
0.8
5
11
3.9
16.8
20
21
M4
3D-3663
2.3
8
4.1
0.8
5
11
3.9
17
M4
3D-3668
2.3
6.5
4.1
0.8
5
11
3.9
16.8
20
M5
3D-3664
2.3
10
5.1
0.8
5
11
3.9
19
24
M5
3D-3673
2.6
10.6
5.0
1
6.2
11
4.6
20
25
M6
3D-3670
2.3
10
6.4
0.8
5
11
3.9
19
24
M3
3D-3674
3.5
6
3.1
1
6
14
5.5
21
24
M 3.5 3D-3675
3.5
6
3.5
1
6
14
5.5
21
24
M4
3D-3679
3.6
8
4.1
1
6
14
5.6
23
27
M4
3D-3720
3.5
8
4.1
1
6
11
5.5
21
25
M5
3D-3721
3.5
8
5.1
1
6
11
5.5
21
25
M5
3D-3681
3.6
10
5.1
1
6
14
5.6
24
29
M6
3D-3680
3.6
11
6.4
1
6
14
5.6
25
30.5
Tools
Crimping
Profile
Packing
Qty
3D-41
200
3D-41
200
3D-41
200
Sheet Metal Lugs
Fork Type Double Grip,
With Insulating Sleeve
Material: ETP-Copper With PVC Sleeve
Surface: Tin Plated
Dimension in mm
Crimping
Profile
Packing
Qty
Conductors mm2
Bolt 0
3D Cat
No.
d1
d3
d2
b
s
a
I
J
Tools
0.5 to 1.5mm2
M 3.5
3D-3685
1.6
3.2
3.5
6.8
0.8
4
14.8
19
3D-41
2.5mm2
M 3.5
3D-3687
2.3
3.9
3.5
6.5
0.8
5
16.8
20
3D-41
200
4mm2 to 6mm2
M3
3D-3689
3.5
5.5
3.1
6
1
6
20.5
24
3D-41
200
M 3.5
3D-3690
3.5
5.5
3.5
6
1
6
20
24
200
Sheet Metal Lugs
s
d2
a
I
J
Tailormade Fork Type
With Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
d3
Conductors
mm2
1.5
Bolt 0
Dimension in mm
d1
d3
d2
b
s
a
I
J
Tools
M3
3D-1672 1.60 3.20 3.10
6.00
0.80
5.00
11.00 14.00 3D-17
M4
3D-1673 1.60 3.20 4.10
8.00
0.80
5.00
12.00 16.00
M4
3D-1674 1.60 3.20 4.10
7.00
0.80
5.00
11.00 14.50
M5
3D-1675 1.60 3.20 5.10 10.00 0.80
5.00
13.00 18.00
M 3.5
3D-1676 1.60 3.20 3.60
6.00
0.80
5.00
11.00 14.00
M 3.5
3D-1678 1.60 3.20 3.60
6.80
0.80
5.00
9.60
3D-1679 1.60 3.20 6.10 10.00 0.80
5.00
13.00 18.00
M6
2.5
3D Cat
No.
d1
8.00
Crimping
Profile
Packing
Qty
200
3D-2
13.00
M4
3D-1680 2.30 3.90 4.10
0.80
5.00
12.00 16.00 3D-17
M5
3D-1681 2.30 3.90 5.10 10.00 0.80
5.00
13.00 18.00
M3
3D-1682 2.30 3.90 3.10
6.50
0.80
5.00
9.50
12.70
M 3.5
3D-1683 2.30 3.90 3.60
6.50
0.80
5.00
9.50
12.20
200
3D-2
65
Sheet Metal Lugs
Tailormade Fork Type
With Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
s
a
I
J
d2
d3
Conductors
mm2
4-6
10
16
66
Bolt 0
3D Cat
No.
d1
Dimension in mm
d1
d3
d2
b
s
8.00
a
I
J
Tools
Crimping
Profile
Packing
Qty
M4
3D-1685 3.50 5.50 4.10
1.00
6.00
13.00 17.00 3D-17
M5
3D-1688 3.50 5.50 5.10 12.00 1.00
6.00
16.00 22.00
3D-2
200
M4
3D-1690 4.30 6.30 4.10 10.00 1.00
8.00
17.00 22.00
3D-2
200
M6
3D-1692 4.30 6.30 6.10 12.00 1.00
8.00
17.00 23.00
M8
3D-1693 4.30 6.30 8.20 16.00 1.00
8.00
19.00 27.00
M5
3D-1694 5.60 8.00 5.10 10.00 1.20 10.00 19.00 24.00
3D-2
200
M6
3D-1695 5.60 8.00 6.10 12.00 1.20 10.00 20.00 26.00
M8
3D-1696 5.60 8.00 8.10 16.00 1.20 10.00 22.00 30.00
M8
3D-1697 5.60 8.00 8.10 18.00 1.20 10.00 24.00 33.00
Sheet Metal Lugs
Fork Type With hook Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
b
d2
a
I
J
s
d1
d3
Conductors
Bolt 0
mm2
3D Cat
No.
Dimension in mm
d1
d3
d2
b
s
a
I
Tools
Crimping
Profile
Packing Qty
0.75
M2
3D-1707 0.90 1.90 2.30
4.60
0.50 3.00
11.00 3D-17
200
1.5
M5
3D-1708 1.60 3.20 5.20
8.00
0.80 5.00 12.00 17.00 3D-17
200
4.60
0.80 5.00
2.5
4
4-6
8.00
J
M2
3D-1709 1.60 3.20 2.30
M6
3D-1710 1.60 3.20 6.30 12.00 0.80 5.00 13.00 19.00
-
13.00
M8
3D-1711 1.60 3.20 8.10 12.00 0.80 5.00 13.00 19.00
3D-2
M2
3D-1712 1.30 3.20 2.30
6.00
0.80 5.00 10.20 13.00
M4
3D-1713 1.70 3.30 4.20
7.50
0.80 5.00
M3
3D-1714 1.80 3.20 3.60
6.50
0.70 5.00 10.00 15.00
M3
3D-1717 1.60 3.20 3.70
6.80
0.80 5.00 10.00 15.00
M4
3D-1718 2.30 3.90 4.20
7.70
0.80 5.00 10.00 16.00 3D-17
M5
3D-1719 2.30 3.90 5.20 10.00 0.80 5.00 12.00 18.00
M6
3D-1720 2.30 3.90 6.30 12.00 0.80 5.00 13.00 19.00
M8
3D-1721 2.30 3.90 8.10 12.00 0.80 5.00 13.00 19.00
8.00
9.40
15.00
200
3D-2
M4
3D-1722 2.30 3.90 4.10
M4
3D-1726 3.10 5.50 4.10 10.00 1.20 6.00 14.00 20.00 3D-17
0.80 5.00 13.00 17.00
M5
3D-1727 3.10 5.50 5.10 10.00 1.20 6.00 14.00 20.00
200
3D-2
M8
3D-1729 3.10 5.50 8.10 12.00 1.20 6.00 14.00 20.00
M5
3D-1731 3.50 5.50 5.20 10.00 1.00 6.00 14.00 20.00 3D-17
M5
3D-1732 3.50 5.50 5.20 12.00 1.00 6.00 14.00 20.00
200
3D-2
67
Sheet Metal Lugs
Type I
Tailormade Fork Type
Type-I Brazed Seam
Type-II With Insulating Sleeve
Material: ETP-Copper
Surface: Tin Plated
b
b
s
s
Type II
J
d2
a
a
I
I
J
d2
d3
d1
d3 d1
Type I
Type II
Dimensions in mm
Bolt Ø
3D CAT NO
d1
d3
d2
b
s
a
I
J
1.5
3.5
3D-1700 RCF
1.6
3.2
3.6
6
0.8
5
12.3
15.7
I
1.5
3.5
3D-3641 RCF
1.6
3.2
3.6
6
0.8
5
17.8
21.2
II
TYPE
Conductor
mm²
Sheet Metal Lugs
Chain Form Fork Type
Material: ETP-Copper
Surface: Tin Plated
b
S
a
I
J
d2
68
Dimensions in mm
Conductor
mm²
Bolt Ø
3D CAT NO
d2
b
s
a
I
J
1.5
3.5
3D-1700-1
3.6
6
0.8
5
11.1
14.5
2.5
3.5
3D-1884-1
3.6
6.5
0.8
5
11.8
15
Sheet Metal Lugs
Round Pin Type,
Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
Dimension in mm
Conductors mm2
3D Cat No.
d1
d3
b
a
J
Tools
Crimping
Profile
0.5
3D-1012
1.6
3.2
1.9
5
17
3D-17
To 1.5mm2
3D-1015
1.6
3.2
1.9
5
14
3D-2
3D-1019
1.8
3.2
1.9
5
17
3D-1020
2.4
4
1.7
4.2
14.4
3D-17
3D-1021
2.3
3.9
1.9
5
17
3D-2
3D-1023
2.3
3.9
1.9
5
21
3D-1028
2.8
4.5
1.7
4.2
14.4
3D-17
3D-1030
2.9
4.9
2.7
6
20
3D-2
2.5mm2
4mm2
6mm2
3D-1037
3.6
5.6
2.6
6.4
20.4
3D-17
3D-1036
3.6
5.6
2.7
6
20
3D-2
3D-1039
4
6
2.7
6
20
Packing Qty
200
200
200
200
Sheet Metal Lugs
Rectangular Pin Type,
Brazed Seam,
Material : ETP-Copper
Surface : Tin Plated
Dimension in mm
Crimping
Profile
Packing
Qty
Conductors mm2
3D Cat No.
d1
d3
b
s
a
J
Tools
10mm2
3D-1041
4.3
6.7
4.3
2.4
8
22
3D-17
200
16mm
2
3D-1042
5.3
7.3
2.7
2
10
25
3D-17
200
16mm2
3D-1043
5.8
8.2
5.5
2.4
10
26.0
3D-17
200
25mm2
3D-1044
7.5
11.1
7.0
3.6
11
31.0
3D-109
200
35mm2
3D-1045
9.0
12.6
8.0
3.6
12
37.0
3D-109
400
50mm2
3D-1046
10.5
14.1
9.0
3.6
16
42.0
3D-109
200
70mm2
3D-1047
12.0
16.0
10.0
4
18
45.0
3D-109
100
95mm2
3D-1048
13.5
18.5
12.5
5
24
55.0
3D-109
25
69
Sheet Metal Lugs
Round Pin Type,
With Insulating Sleeve
Material: ETP-Copper With PVC Sleeve
Surface: Tin Plated
Dimension in mm
Conductors mm2
d1
3D Cat No.
d3
b
a
a-1
J
0.5
3D-3008
1.6
3.2
1.9
5
11
22
To 1.5mm2
3D-3013
1.6
3.2
1.9
5
11
19
Tools
Crimping
Profile
Packing
Qty
3D-41
200
3D-3020
1.8
3.8
1.9
5
11
22
2.5m2
3D-3022
2.3
3.9
1.9
5
11
22
3D-41
200
4mm2
3D-3026
2.9
4.9
2.7
6
14
28
3D-41
200
6mm2
3D-3030
3.6
5.6
2.7
6
14
28
3D-41
200
Sheet Metal Lugs
Round Pin Type
Double Grip, with Insulating Sleeve
Material: ETP-Copper with PVC Sleeve
Surface: Tin Plated
Dimension in mm
Packing
Qty
d1
d3
b
s
a
a-1
J
L
Tools
0.5 to 1.5mm2
3D-3040
1.6
3.2
1.9
0.8
5
11
22
17
3D-41
200
2.5mm
3D-3043
2.3
3.9
1.9
0.8
5
11
22
17
3D-41
200
4mm
3D-3046
2.9
4.9
2.7
1
6
14
29
20
3D-41
200
2
2
70
Crimping
Profile
3D Cat No.
Conductors mm2
Sheet Metal Lugs
s
b
a
J
Tailormade Round Pin Type
Material: ETP-Copper
Surface: Tin Plated
d3
d1
Dimension in mm
Conductors mm2
3D Cat No.
d1
d3
b
s
a
J
Tools
1
3D-1010B
1.2
2.8
1.8
0.8
4
16
3D-17
Crimping
Profile
Packing
Qty
200
Sheet Metal Lugs
b
a
J
Tailormade Rectangular Pin Type
with Insulating Sleeve
Material: ETP-Copper With PVC Sleeve
Surface: Tin Plated
d1
d3
Dimension in mm
Conductors mm2
3D Cat No.
d1
d3
b
s
10
3D-3033
4.3
6.7
4.3
16
3D-3034
5.8
8.2
5.5
Packing Qty
a
J
1.2
8
30
200
1.2
10
36
200
71
Sheet Metal Lugs
Flat Pin Type, Brazed Seam
Material: ETP-Copper
Surface: Tin Plated
Conductors mm2
3D Cat No.
0.5 to 1.5mm2
2.5mm2
4mm2 To 6mm2
Dimension in mm
J
Tools
5
17
3D-17
5
15.5
3D-2
23.5
d1
d3
b
s
a
3D-1011
1.6
3.2
3.1
0.8
3D-1013
1.6
3.2
2.3
0.8
3D-1014
1.6
3.2
2.3
0.8
5
3D-1022
2.3
3.9
3.1
0.8
5
17
3D-17
3D-1027
2.4
4
3.1
0.8
4.2
14.4
3D-2
3D-1024
2.3
3.9
2.3
0.8
5
23.5
3D-1025
2.3
3.9
2.8
0.8
5
14
3D-1029
2.8
4.4
3.1
0.8
4.2
14.4
3D-1032
3.6
5.6
5.1
1
6
20
3D-17
3D-1035
3.4
5.5
5.1
1
6.35
20.6
3D-2
3D-1038
3.6
5.6
2.8
1
6
16
Crimping
Profile
Packing Qty
200
200
200
Sheet Metal Lugs
Flat Pin Type with Insulating Sleeve
Material: ETP-Copper with PVC Sleeve
Surface: Tin Plated
Conductors mm2
3D Cat
No.
d1
d3
b
s
a
a-1
J
L
0.5mm2 To 1.5mm2
3D-3009
1.6
3.2
3.1
0.8
5
11
22
17
3D-3011
1.6
3.2
2.3
0.8
5
11
20.5
15.5
3D-3012
1.6
3.2
2.3
0.8
5
11
28.5
23.5
3D-3023
2.3
3.9
3.1
0.8
5
11
22
17
3D-3025
2.3
3.9
2.3
0.8
5
11
28.5
23.5
3D-3027
3.6
5.6
5.1
1
6
14
36
20
2.5mm
2
4mm2 to 6mm2
72
Dimension in mm
Tools
Crimping
Profile
Packing Qty
3D-41
200
3D-41
200
3D-41
200
Sheet Metal Lugs
Flat Pin Type Double grip
with insulating sleeve
Material: ETP-Copper With PVC Sleeve
Surface: Tin Plated
Conductors mm2
2.5
Dimension in mm
3D Cat No.
3D-3044
Tools
d1
d3
b
s
a
a-1
J
L
2.3
3.9
3.1
0.8
5
11
22
17
Crimping
Profile
3D-41
Packing Qty
200
Sheet Metal Lugs
Tailormade Flat Pin Type
Material: ETP-Copper
Surface: Tin Plated
Conductors
mm2
3D Cat No.
1
2.5
Dimension in mm
Crimping
Profile
Tools
Packing Qty
d1
d3
b
s
a
J
3D-1010
1.2
2.8
3.1
0.8
4
16
3D-17
200
3D-1024
2.6
4
2.5
0.7
5.1
25.2
3D-17 & 3D-2
200
Sheet Metal Lugs
Tailormade Flat Pin Type
with Insulating Sleeve
Material: ETP-Copper with PVC Sleeve
Surface: Tin Plated
Conductors mm2
3D Cat No.
1.5
3D-3012S DG
Dimension in mm
d1
d3
b
s
a
a-1
J
L
1.6
3.2
2.3
0.8
5
11
23.5
18.5
Tools
3D-41
Crimping
Profile
Packing Qty
200
73
Copper semis
Copper Bus Bar
Copper Bus Bar
T - Aluminium &
Copper Connector
X - Aluminium &
Copper Connector
Copper Earthing Strips
Plain & Perforated
74
Hand Crimping Tool - 3D-17
EN 19 made jaw
Ratchet mechanism for quick
locking and unlocking
Spring steel handles to give
strength and durability to the
tool.
Rubber grips provide ergonomic
handling.
l Crimping tool for non-insulated brazed copper terminals and connectors.
l Crimping range is from 1.5mm2 to 6mm2.
l The jaw is made from EN 19 and handles from spring steel giving strength and durability to the tool. Rubber grips provide ergonomic handling and good grip.
l Ratchet mechanism for quick locking and unlocking.
Hand Crimping Tool - 3D-2
EN 19 made jaw
Ratc­het mechanism for quick
locking and unlocking
Spring steel handles to give
strength and durability to the tool.
Rubber grips provide ergonomic
handling.
l Crimping tool for non-insulated brazed copper terminals, tubular lugs and connectors.
l Crimping range is from 1.5mm2 to 16mm2
l The jaw is made from EN 19 and handles from spring steel giving strength and
durability to the tool. Rubber grips provide ergonomic handling and a good grip.
l Ratchet mechanism for quick locking and unlocking.
75
Hand Crimping Tool - 3D-41
The jaws are made from cast
EN-19. The ergonomic grips are
made from polypropylene
Spring steel handles to give
strength and durability to the tool.
Rubber grips provide ergonomic
handling.
Ratchet mechanism for quick
locking and unlocking.
Crimping tool for PVC/Nylon insulated, double grip, terminals and connectors.
Crimping range is from 1.5mm2 to 6mm2.
The jaws are made from cast EN-19.
The handles are made from spring steel giving strength and durability to the tool.
Rubber grips Provide ergonomic handling and a good grip.
l Ratchet mechanism for quick locking and unlocking. The crimping pressure can also
be adjusted to accommodate different terminal sizes.
l
l
l
l
Hand Crimping Tool - 3D-48
EN 19 forging flat made jaw, 8mm
thick to accommodate all lengths
of end sleeves.
Ratchet mechanism for quick
locking and unlocking
Spring steel handles to give
strength and durability to the
tool.
Rubber grips provide ergonomic
handling.
l Crimping tool for end sealing ferrules - insulated and non insulated.
l Crimping range is from 0.5mm2 to 16mm2. The jaw is made from EN 19 forging flat and is 8mm thick to accommodate all lengths of end sleeves.
Provide ergonomic handling and a good grip. Ratchet mechanism for quick locking and
unlocking.
l Crimp profile is v-shaped.
l The handles are made from spring steel giving strength and durability to the tool. Rubber grips 76
Hand Crimping Tool - 3D-52
EN 19 forging flat made jaw, 8mm
thick to accommodate all lengths
of end sleeves.
Ratchet mechanism for quick
locking and unlocking.
The handles are made from
spring steel giving strength and
durability to the tool. Rubber grips
provide ergonomic handling and
a good grip.
l Crimping tool for end sealing ferrules - insulated and non insulated.
l Crimping range is from 0.5mm2 to 6mm2
l The jaw is made from EN 19 forging flat and is 8mm thick to accommodate all lengths of end sleeves.
provide ergonomic handling and a good grip.
l Crimp profile is trapezoid-shaped.
l The handles are made from spring steel giving strength and durability to the tool. Rubber grips l Ratchet mechanism for quick locking and unlocking.
Hand Crimping Tool - 3D-53
The jaw is made from EN 19
forging flat to accommodate all
lengths of end sleeves.
Ratchet mechanism for quick
locking and unlocking
Spring steel handles to give
strength and durability to the tool.
Rubber grips provide ergonomic
handling.
Crimping tool for end sealing ferrules - insulated and non insulated.
Crimping range is from 10mm2 to 16mm2
The jaw is made from EN 19 forging flat to accommodate all lengths of end sleeves.
Crimp profile is trapezoid-shaped.
The jaw is made from EN 19 and handles from spring steel giving strength and durability to the tool. Rubber grips provide ergonomic handling and a good grip.
l Ratchet mechanism for quick locking and unlocking.
l
l
l
l
l
77
Hand Crimping Tool - 3D-95
Entire body is made from CK-45
forging flat.
Detachable handles that act as
extensions providing
excellent leverage for crimping
higher cross-section conductors
Dies having ring profile
l
l
l
78
Single tool accommodates a wide array of terminals (copper and aluminium).
Entire body is made from CK-45 forging flat. It is chrome plated for corrosion resistance and finish.
Detachable handles that act as extensions providing excellent leverage for crimping higher cross-section conductors.
3D-95
Variants
Crimping
Capacity
Description
Std. Dies
Extension
Handle
3D-95R
10 - 95 mm2
For Cu Light duty/ Al. terminals .
with Al. cables
Ring dies > 102, 162,
252, 352, 502, 702, 952
Not Included
3D-96
10 - 185 mm2
For Cu Light duty/ Al. terminals .
with Al. cables
Ring dies > 102, 162, 252,
352, 502, 702, 952, 1202,
1502, 1852
Included
3D-95H
2.5 - 185 mm2
For Al terminals to Al. cables
Hex dies > 2.52 to 1852
Included
3D-107H
2.5 - 185 mm2
For Cu Light duty to Al cables
Hex dies > 2.52 to 1852
Included
3D-108H
1.5 - 185 mm2
For Cu terminals to Cu Cables
Hex dies > 1.52 to 1852
Included
3D- 109
10 - 95 mm2
For Ring Terminals
10 - 95 mm2
Not Included
3D-110
25 - 185 mm2
For End Sealing Ferrules
252 to 1852
Included
Hand Crimping Tool - 3D-7
Chrome plated for corrosion
resistance made from CK-45
forged flat
Dies having hexagonal profile
l The main body is made from CK-45 forged flat. High strength and durability.
l It is CNC machined for accuracy and finish.
l It is chrome plated for corrosion resistance.
l Ram- Gear powered mechanism for effortless crimping and automatic release of die.
3D-7
Variants
Crimping
Capacity
Description
3D-7
2.5 - 400 mm
For Crimping Al.
terminals /
connectors Al. cables
3D-116
2.5 - 400 mm2
3D-117
1.5 - 400 mm2
2
Std. Dies
EXTRA DIES *
Cat No.
For Conductor (mm2)
120 , 150 ,
1852, 2402,
3002, 4002
3D-316
3D-317
3D-318
3D-319
3D-320
102, 162, 252
2.52, 42, 62, 352
502
702
952
For Crimping Copper
light duty terminals/
connectors to Al. cables
1202, 1502,
1852, 2402,
3002, 4002
3D-641
3D-642
3D-643
3D-644
3D-645
102, 162, 252
42, 62, 352
2.52, 502
702
952
For Crimping Heavy duty
copper terminals /
connectors to
XLPE Cu. Cables.
1202, 1502,
1852, 2402,
3002, 4002
3D-652
3D-653
3D-654
3D-655
3D-656
102, 162, 252
42, 62, 352
1.52, 2.52, 502
702
952
2
Cable Cutter - 3D-31
2
* Extra dies on extra payment
Made from EN 42 steel, very
durable and the blade retains
sharp edge after prolonged use.
Entire tool is blackened to resist
corrosion.
l Wire cutting tool with a range upto 6mm diameter.
l Light weight and simple to use.
l Made from EN 42 steel, very durable and the blade retains sharp edge after prolonged use.
l Entire tool is blackened to resist corrosion.
79
Heavy Duty HYDRAULIC Crimping Tool - 3D-150
Chrome plated MS body for
corrosion resistance
(3D-149)
Hand operated hydraulic pump
l Highly versatile tool for heavy-duty crimping upto 1000 mm2
l Chrome plated MS body for corrosion resistance.
l Hydraulic pump (3D-149) which is hand operated and exerts a pressure of 350 kg/cm2
l Optional trolley and pressure gauge can be provided for easy movement.
3D-150
Variants
Crimping
Capacity
Description
3D-120H
25 - 1000 mm2
For Cu. Terminals/
connectors to Cu Std.
And XLPE cables
3D-121H
25 - 1000 mm2
3D-150R
3D-150H
EXTRA DIES *
Cat No.
For Conductor (mm2)
1202, 1502,
1852,
2402, 3002,
4002
3D-701
3D-702
3D-703
3D-704
3D-705
3D-734
3D-735
3D-736
3D-737
252
352
502
702
952
5002
6302
8002
10002
For Cu. Economy
terminals
And Au cables
1202, 1502,
1852,
2402, 3002,
4002
3D-709
3D-710
3D-711
3D-712
3D-713
3D-738
3D-739
3D-740
3D-741
252
352
502
702
952
5002
6302
8002
10002
120 - 1000 mm2
For Al./ Cu. Light duty
Terminals / Connectors.
to Al. cables
1202, 1502,
1852,
2402, 3002,
4002
3D-541
3D-542
3D-543
3D-544
3D-545
3D-546
3D-547
6302 Cu. Terminals
5002 Al. Terminals
6302 Al. Terminals
10002 Cu. Terminals
8002 Cu. Terminals
8002 Al. Terminals
10002 Al. Terminals
25 - 1000 mm2
For Al./ terminals/
connectors with
Al. cables
1202, 1502,
1852,
2402, 3002,
4002
3D-717
3D-718
3D-328
3D-329
3D-330
3D-501
3D-502
3D-503
3D-504
252
352
502
702
952
5002
6302
8002
10002
* Extra dies on extra payment
80
Std. Dies
Heavy Duty HYDRAULIC Crimping Tool - 3D-100
(3D-149)
Lightweight head is made from
EN-19 and is blackened for
corrosion resistance
Handle is knurled for extra grip
l Hand operated hydraulic crimping tool for aluminium and copper lugs ranging from 25 to 400mm2
l Lightweight head is made from EN-19 and is blackened for corrosion resistance.
l The handle is knurled for extra grip.
3D-100
Variants
Crimping
Capacity
Description
3D-100
25 - 400 mm2
For Copper terminals
and connectors to .
Cu. Std And
XLPE cables.
3D-125
25 - 400 mm2
3D-124
3D-100A
Std. Dies
EXTRA DIES *
Cat No.
For Conductor (mm2)
1202, 1502,
1852,
2402, 3002,
4002
3D-781
3D-782
3D-783
3D-784
3D-785
252
352
502
702
952
For Cu Light duty
and connectors to
Al. cables
1202, 1502,
1852,
2402, 3002,
4002
3D-794
3D-795
3D-796
3D-797
3D-798
252
352
502
702
952
25 - 400 mm2
For Al terminals and
connectors to
Al. cables
1202, 1502,
1852,
2402, 3002,
4002
3D-807
3D-808
3D-809
3D-810
3D-811
252
352
502
702
952
500 - 630 mm2
For Al terminals and
Cu Light duty terminals
and connectors
5002, 6302
3D-818
3D-819
5002
6302
* Extra dies on extra payment
81
HYDRAULIC Cable Cutter - 3D-30
Made from EN 47 steel, very
durable and the blade retains
sharp edge after prolonged use.
Can cut upto dia 40 mm
The hosing is a quick-release hose
which is leak proof.
l Armoured aluminium and copper cable cutting tool with a range of 40 mm diameter. Cutting is done with a Hand-operated hydraulic pump(3D-170).
l Light weight and simple to use.
l Made from EN 47 steel, very durable and the blade retains sharp edge after prolonged use.
l It features a lightweight but robust forged head that fits nicely into the operator's hand.
l Entire tool is blackened to resist corrosion.
l The pump is light and portable, a must for onsite usage. The hosing is a quick-release hose which is leak proof. It can provide a pressure of 250 kg/cm2.
Hand operated hydraulic crimping tool - 3D-88
Head is made from cast EN-19
Body is made from CK-45 forged
flat
l
l
l
l
l
l
l
82
Hand operated hydraulic crimping tool for tubular copper - heavy duty and copper economy and aluminium lugs.
Body is made from CK-45 forged flat. The crimping head is made from cast EN-19. Tool is light in weight and robust for rough handling.
The crimping head is interlocking type and swivels 180 degrees for quick change of dies.
Crimping range is from 10 to 120mm2
Crimping is complete within 20 strokes.
Comes with a wooden box with excellent finish
The dies are made from EN-19 forging flat and are chrome plated for corrosion resistance.
QUALITY POLICY
We, at billets Elektro Werke Ltd.
are committed to achieve full
customer satisfaction and enhancing it.
This commitment is shared by all our
employees and is an integral part of the
fundamental value system of our company.
We shall achieve this by continual improvement
of processes, products, services and systems,
designed to meet the expectation of the
Customers, and thereby foster
good partnerships with them.
We are approved vendors for:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
ABB LIMITED
ALSTOM PROJECTS INDIA
AREVA T&D (INDIA) LTD
BARC
BHARAT EARTH MOVERS LTD
BHARAT HEAVY ELECTRICALS LTD
BLUE STAR LTD
C-DOT
CESC LTD
CROMPTON GREAVES LTD
CUMMINS GENERATION TECHNOLOGIES
12. EMERSON NETWORK POWER (I) PVT. LTD.
13. EXIDE INDUSTRIES LTD
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
HIND RECTIFIERS LTD
ITI LTD
LARSEN & TOUBRO LTD
NALCO
NTPC LTD
OTIS ELEVATOR CO (INDIA) LTD
POWERICA LTD
RAILWAYS
RELIANCE INDUSTRIES LTD
SCHNEIDER ELECTRIC
SIEMENS LTD
TORRENT POWER LIMITED
26. TYCO ELECTRONICS CORP. INDIA PVT. LTD.
Manufacturing facility in Umergaon
CORP. OFFICE : 42, 1st Floor, Jagat Satguru Industrial Estate,
Off Aarey Road, Goregaon (E), Mumbai - 400 063, India.
T +91-22-4058 4200/4/5
F : +91-22-4058 4222
E : [email protected], [email protected]
W: www.bewl.in
Designed by: PIXEL
Dealer / Distributor
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages